vdr/status.h
Klaus Schmidinger a26aae3ce8 Version 2.3.1
VDR developer version 2.3.1 is now available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-2.3.1.tar.bz2

A 'diff' against the previous version is available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-2.2.0-2.3.1.diff

MD5 checksums:

391c2ed60e2f7d24563fe3ed5854bc4f  vdr-2.3.1.tar.bz2
983fd4bad7d19cd98301d54173107129  vdr-2.2.0-2.3.1.diff

WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

*** PLEASE BE VERY CAREFUL WHEN USING THIS DEVELOPER VERSION, ESPECIALLY
*** IF YOU ENABLE THE NEW SVDRP PEERING! KEEP BACKUPS OF ALL YOUR TIMERS
*** AND OBSERVE VERY CLOSELY WHETHER EVERYTHING WORKS AS EXPECTED. THIS
*** VERSION INTRODUCES SOME MAJOR CHANGES IN HANDLING GLOBAL LISTS AND
*** LOCKING, SO ANYTHING CAN HAPPEN! YOU HAVE BEEN WARNED!

The main focus of this developer version is on the new locking mechanism
for global lists, and the ability to handle remote timers.
Any plugins that access the global lists of timers, channels, schedules
or recordings, will need to be adjusted (see below for details). Please
do initial tests with plain vanilla VDR and just the output plugin you
need.

Known bugs/problems:

- After deleting the last recording in a sub folder, the cursor may not
   be positioned correctly.
- Instant recordings and pausing live video don't (yet) use the default
   SVDRP host for recording.

From the HISTORY file:
 - The new function cOsd::MaxPixmapSize() can be called to determine the maximum size
  a cPixmap may have on the current OSD. The 'osddemo' example has been modified
  accordingly. Plugin authors may want to use this function in case they use pixmaps
  that are larger than the full OSD size. The default implementation sets this limit
  to 2048x2048 pixel.
- The Setup/CAM menu now displays which device an individual CAM is currently
  assigned to (suggested by Frank Neumann).
- Added detection of 24fps (thanks to Thomas Reufer).
- Added a note about the VDR User Counter and VDR's facebook page to the README file.
- The dvbhddevice plugin is no longer part of the VDR source archive.
  You can get the latest version of this plugin from the author's repository at
  https://bitbucket.org/powARman/dvbhddevice.
- The dvbsddevice and rcu plugins are no longer part of the VDR source archive.
  You can get the latest versions of these plugins from ftp://ftp.tvdr.de/vdr/Plugins.
- Added a section about Output Devices to the INSTALL file.
- Fixed setting the source value of newly created channels, in case the NIT is
  received from a different, but very close satellite position (reported by Daniel
  Ribeiro). The code for handling different NITs has been removed from nit.c, because
  according to the DVB standard table id 0x40 carries only the NIT of the actual
  network.
- Added some comment to cPixmap about the relation between OSD, ViewPort and DrawPort
  (suggested by Thomas Reufer).
- Improved syncing on sections when parsing the NIT and SDT.
- Fixed scaling subtitles (their areas could sometimes extend outside the actual OSD).
- Reduced the priority of the "video directory scanner" thread (suggested by Thomas
  Reufer) and checking cIoThrottle::Engaged() when it is running.
- The script that gets called for recordings is now also called right before a
  recording is edited, with the first parameter being "editing" (suggested by
  Dieter Ferdinand).
- The new setup option "OSD/Default sort mode for recordings" can be used to define
  how recordings shall be sorted by default (either by time or by name, with "by time"
  being the default). If a particular sort mode has been selected for a folder by
  pressing '0', the default no longer applies to that folder. Repeating timers no
  longer write a ".sort" file into a recordings folder to have the recordings sorted
  by time.
- The command line option -D now accepts the value '-' (as in -D-), which prevents
  VDR from using any DVB devices (suggested by Dietmar Spingler).
- The -V and -h options now list the plugins in alphabetical order (suggested by
  Dietmar Spingler).
- Fixed a compiler warning in font.c.
- Commented out the line
  #define DEPRECATED_VIDEOSYSTEM
  in device.h. If a plugin doesn't compile with this version of VDR, you can uncomment
  this line as a quick workaround. In the long run the plugin will need to be adapted.
- The function cOsd::GetBitmap() is now 'protected'. If a plugin doesn't compile with
  this version of VDR, you can uncomment the line
  //#define DEPRECATED_GETBITMAP
  in osd.h as a quick workaround. In the long run the plugin will need to be adapted.
- The -u option now also accepts a numerical user id (suggested by Derek Kelly).
- The SVDRP port now accepts multiple concurrent connections. You can now keep an
  SVDRP connection open as long as you wish, without preventing others from
  connecting. Note, though, that SVDRP connections still get closed automatically
  if there has been no activity for 300 seconds (configurable via
  "Setup/Miscellaneous/SVDRP timeout (s)").
- The SVDRP log messages have been unified and now always contain the IP and port
  number of the remote host.
- SVDRP connections are now handled in a separate "SVDRP server handler" thread,
  which makes them more responsive. Note that there is only one thread that handles
  all concurrent SVDRP connections. That way each SVDRP command is guaranteed to be
  processed separately, without interfering with any other SVDRP commands that might
  be issued at the same time. Plugins that implement SVDRP commands may need to take
  care of proper locking if the commands access global data.
- VDR now sends out a broadcast to port 6419/udp, which was assigned to 'svdrp-disc'
  by the IANA. VDRs listening on that port will automatically initiate an SVDRP
  connection to the broadcasting VDR, and in turn send out a broadcast to make
  other VDRs connect to them. That way all VDRs within the local network will
  have permanent "peer-to-peer" SVDRP connections between each other. The
  configuration in the svdrphosts.conf file is taken into account when considering
  whether or not to respond to an SVDRP discover broadcast.
- The new SVDRP command PING is used by automatically established peer-to-peer
  connections to keep them alive.
- The new function GetSVDRPServerNames() can be used to get a list of all VDRs
  this VDR is connected to via SVDRP.
- The new function ExecSVDRPCommand() can be used to execute an SVDRP command on
  one of the servers this VDR is connected to, and retrieve the result.
  The helper functions SVDRPCode() and SVDRPValue() can be used to easily access
  the codes and values returned by ExecSVDRPCommand().
- The cTimer class now has a new member named 'remote', which holds the name of the
  remote server this timer will record on. If this is NULL, it is a local timer.
- Timers from other VDRs that are connected to this VDR via SVDRP are now
  automatically fetched and stored in the global Timers list. In order for this
  to work, all of the channels used by timers on the remote VDR must also be
  defined on the local VDR (however, not necessarily in the same sequence).
  Automatic channel syncing will be implemented later.
- The main menu of the LCARS skin now displays a small rectangle on the left side
  of a timer if this is a remote timer. The color of that rectangle changes if
  the timer is currently recording on the remote VDR.
- Accessing the global Timers list now has to be protected by proper locking,
  because SVDRP commands are now executed in a separate thread.
  The introduction of this locking mechanism required the following changes:
  + The new classes cStateLock and cStateKey are used to implement locking
    with quick detection of state changes.
  + cConfig::cConfig() now has a parameter that indicates whether this list
    requires locking.
  + The global lists of Timers, Channels, Schedules and Recordings are no longer
    static variables. They are now pointers that need to be retrieved through
    a call to cTimers::GetTimersRead/Write(), cChannels::GetChannelsRead/Write(),
    cSchedules::GetSchedulesRead/Write() and cRecordings::GetRecordingsRead/Write(),
    respectively.
  + References from/to link channels are now removed in cChannels::Del() rather
    than cChannel::~cChannel(), to make sure the caller holds a proper lock.
  + cChannel::HasTimer() has been removed. This information is now retrieved
    via cSchedule::HasTimer().
  + Several member functions of cChannel, cTimer, cMarks and cRecording have
    been made 'const', and some of them are now available as both 'const' and
    'non-const' versions.
  + The cChannel::Set...() functions are now 'bool' and return true if they have
    actually changed any of the channels's members.
  + cChannels::SetModified() has been renamed to cChannels::SetModifiedByUser().
  + cChannels::Modified() has been renamed to cChannels::ModifiedByUser(), and
    now has a 'State' parameter that allows the caller to see whether a channel
    has been modified since the last call to this function with the same State
    variable.
  + The macros CHANNELSMOD_NONE/_AUTO/_USER have been removed.
  + cMarks now requires locking via cStateKey.
  + cSortedTimers now requires a pointer to the list of timers.
  + cEvent::HasTimer() no longer scans the list of timers to check whether an event
    is referenced by a timer, but rather keeps score of how many timers reference
    it. This was necessary in order to avoid having to lock the list of timers from
    within a cEvent.
  + The new class cListGarbageCollector is used to temporary store any objects deleted
    from cLists that require locking. This allows pointers to such objects to be
    dereferenced even if the objects are no longer part of the list.
  + cListBase::Contains() can be used to check whether a particular object is still
    contained in that list.
  + Outdated events are no longer "phased out", but rather deleted right away and thus
    taken care of by the new "garbage collector" of the list.
  + Deleted cRecording objects are no longer kept in a list of "vanished" recordings,
    but are rather taken care of by the new "garbage collector" of the list.
  + cSchedules::ClearAll() has been removed. The functionality is now implemented
    directly in cSVDRPServer::CmdCLRE().
  + tEventID has been changed to u_int16_t in order to make room for the new member
    numTimers in cEvent.
  + cSchedule now has a member Modified(), which can be used with a State variable
    to quickly determine whether this schedule has been modified since the last call
    to this function with the same State variable.
  + cSchedulesLock has been removed. Locking the list of schedules is now done via
    the cList's new locking mechanism.
  + The 'OnlyRunningStatus' parameters in cEpgHandler::BeginSegmentTransfer() and
    cEpgHandler::EndSegmentTransfer() are now obsolete. They are still present in
    the interface for backward compatibility, but may be removed in a future version.
    Their value is always 'false'.
  + The constant tcMod is no longer used in cStatus::TimerChange(). The definition is
    still there for backward compatibility.
  Plugins that access the global lists of Timers, Channels, Recordings or Schedules
  will need to be adapted as follows:
  + Instead of directly accessing the global variables Timers, Channels or Recordings,
    they need to set up a cStateKey variable and call the proper getter function,
    as in
      cStateKey StateKey;
      if (const cTimers *Timers = cTimers::GetTimersRead(StateKey)) {
         // access the timers
         StateKey.Remove();
         }
    and
      cStateKey StateKey;
      if (cTimers *Timers = cTimers::GetTimersWrite(StateKey)) {
         // access the timers
         StateKey.Remove();
         }
    See timers.h, thread.h and tools.h for details on this new locking mechanism.
  + There are convenience macros for easily accessing these lists without having
    to explicitly set up a cStateKey and calling its Remove() function. These macros
    have the form LOCK_*_READ/WRITE (with '*' being TIMERS, CHANNELS, SCHEDULES or
    RECORDINGS). Simply put such a macro before the point where you need to access
    the respective list, and there will be a pointer named Timers, Channels, Schedules
    or Recordings, respectively, which is valid until the end of the current block.
  + If a plugin needs to access several of the global lists in parallel, locking must
    always be done in the sequence Timers, Channels, Recordings, Schedules. This is
    necessary to make sure that different threads that need to lock several lists at
    the same time don't end up in a deadlock.
  + Some pointer variables may need to be made 'const'. The compiler will tell you
    about these.
- cSectionSyncer has been improved to better handle missed sections.
- Added a missing initialization of 'seen' in cChannel's copy constructor.
- Background modifications of channels, timers and events are now displayed immediately
  in the corresponding menus.
- cEIT now checks the version of the tables before doing any processing, which saves
  a lot of locking and processing.
- If a timer is newly created with the Red button in the Schedule menu, and the timer
  is presented to the user in the "Edit timer" menu because it will start immediately,
  it now *must* be confirmed with "Ok" to set the timer. Otherwise the timer will not
  be created.
- Recordings and deleted recordings are now scanned in a single thread.
- The new SVDRP command POLL is used by automatically established peer-to-peer
  connections to trigger fetching remote timers.
- You can now set DumpSVDRPDataTransfer in svdrp.c to true to have all SVDRP
  communication printed to the console for debugging.
- Added a missing 'const' to cReceiver::Receive(), to protect the given Data from
  being modified.
- The SVDRP commands that deal with timers (DELT, LSTT, MODT, NEWT, NEXT and UPDT)
  as well as any log messages that refer to timers, now use a unique id for each
  timer, which remains valid as long as this instance of VDR is running. This means
  that timers are no longer continuously numbered from 1 to N in LSTT. There may be
  gaps in the sequence, in case timers have been deleted.
- The Timers menu now displays the name of the remote VDR in front of the timer's
  file name, if this is a remote timer.
- The new options "Setup/Miscellaneous/SVDRP peering", ".../SVDRP host name" and
  ".../SVDRP default host" can be used to configure automatic peering between VDRs
  in the same network. Peering is disabled by default and can be enabled by setting
  "SVDRP peering" to "yes".
- The function cTimer::ToText() no longer returns a newline character at the end of
  the string. The newline is now added by the caller as necessary. This was changed
  because cTimer::ToText() is now also needed in a context where the terminating
  newline can't be used. Consequently, cChannel::ToText() and cMark::ToText() have
  been modified accordingly.
- All timer related response strings from SVDRP commands now use the channel ID
  instead of channel numbers.
- The "Edit timer" menu now has a new parameter "Record on", which can be used to
  select the VDR on which this timer shall record. Timers can be freely moved
  between connected VDRs by simply selecting the desired machine in this field.
- The SVDRP command DELT no longer checks whether the timer that shall be deleted
  is currently recording.
- The character 0x0D is now stripped from EPG texts (reported by Janne Pänkälä).
- The EPG scanner no longer moves the dish if there is a positioner.
- The 'newplugin' script now creates the 'po' subdirectory for translations (thanks
  to Thomas Reufer).
- Skins can now implement cSkinDisplayMenu::MenuOrientation() to display horizontal
  menus (thanks to Stefan Braun).
- Fixed a possible stack overflow in cListBase::Sort() (thanks to Oliver Endriss).
- Changed the description of the --chartab option in the INSTALL file to refer to
  "DVB SI table strings" instead of "EPG data".
- The width and height of the OSD are now limited to the actual maximum dimensions
  of the output device, taking into account the top and left offset.
- The new setup option "Recording/Record key handling" can be used to define
  what happens if the Record key on the remote control is pressed during
  live tv (suggested by Dietmar Spingler).
- Empty adaptation field TS packets are now skipped when recording (thanks to
  Christopher Reimer, based on the "AFFcleaner" by Stefan Pöschel).
2015-09-18 00:04:12 +02:00

109 lines
6.4 KiB
C++

/*
* status.h: Status monitoring
*
* See the main source file 'vdr.c' for copyright information and
* how to reach the author.
*
* $Id: status.h 4.1 2015/08/02 10:34:44 kls Exp $
*/
#ifndef __STATUS_H
#define __STATUS_H
#include "config.h"
#include "device.h"
#include "player.h"
#include "tools.h"
enum eTimerChange { tcMod, tcAdd, tcDel }; // tcMod is obsolete and no longer used!
class cTimer;
class cStatus : public cListObject {
private:
static cList<cStatus> statusMonitors;
protected:
// These functions can be implemented by derived classes to receive status information:
virtual void ChannelChange(const cChannel *Channel) {}
// Indicates a change in the parameters of the given Channel that may
// require a retune.
virtual void TimerChange(const cTimer *Timer, eTimerChange Change) {}
// Indicates a change in the timer settings.
// Timer points to the timer that has been added or will be deleted, respectively.
virtual void ChannelSwitch(const cDevice *Device, int ChannelNumber, bool LiveView) {}
// Indicates a channel switch on the given DVB device.
// If ChannelNumber is 0, this is before the channel is being switched,
// otherwise ChannelNumber is the number of the channel that has been switched to.
// LiveView tells whether this channel switch is for live viewing.
virtual void Recording(const cDevice *Device, const char *Name, const char *FileName, bool On) {}
// The given DVB device has started (On = true) or stopped (On = false) recording Name.
// Name is the name of the recording, without any directory path. The full file name
// of the recording is given in FileName, which may be NULL in case there is no
// actual file involved. If On is false, Name may be NULL.
virtual void Replaying(const cControl *Control, const char *Name, const char *FileName, bool On) {}
// The given player control has started (On = true) or stopped (On = false) replaying Name.
// Name is the name of the recording, without any directory path. In case of a player that can't provide
// a name, Name can be a string that identifies the player type (like, e.g., "DVD").
// The full file name of the recording is given in FileName, which may be NULL in case there is no
// actual file involved. If On is false, Name may be NULL.
virtual void SetVolume(int Volume, bool Absolute) {}
// The volume has been set to the given value, either
// absolutely or relative to the current volume.
virtual void SetAudioTrack(int Index, const char * const *Tracks) {}
// The audio track has been set to the one given by Index, which
// points into the Tracks array of strings. Tracks is NULL terminated.
virtual void SetAudioChannel(int AudioChannel) {}
// The audio channel has been set to the given value.
// 0=stereo, 1=left, 2=right, -1=no information available.
virtual void SetSubtitleTrack(int Index, const char * const *Tracks) {}
// The subtitle track has been set to the one given by Index, which
// points into the Tracks array of strings. Tracks is NULL terminated.
virtual void OsdClear(void) {}
// The OSD has been cleared.
virtual void OsdTitle(const char *Title) {}
// Title has been displayed in the title line of the menu.
virtual void OsdStatusMessage(const char *Message) {}
// Message has been displayed in the status line of the menu.
// If Message is NULL, the status line has been cleared.
virtual void OsdHelpKeys(const char *Red, const char *Green, const char *Yellow, const char *Blue) {}
// The help keys have been set to the given values (may be NULL).
virtual void OsdItem(const char *Text, int Index) {}
// The OSD displays the given single line Text as menu item at Index.
virtual void OsdCurrentItem(const char *Text) {}
// The OSD displays the given single line Text as the current menu item.
virtual void OsdTextItem(const char *Text, bool Scroll) {}
// The OSD displays the given multi line text. If Text points to an
// actual string, that text shall be displayed and Scroll has no
// meaning. If Text is NULL, Scroll defines whether the previously
// received text shall be scrolled up (true) or down (false) and
// the text shall be redisplayed with the new offset.
virtual void OsdChannel(const char *Text) {}
// The OSD displays the single line Text with the current channel information.
virtual void OsdProgramme(time_t PresentTime, const char *PresentTitle, const char *PresentSubtitle, time_t FollowingTime, const char *FollowingTitle, const char *FollowingSubtitle) {}
// The OSD displays the given programme information.
public:
cStatus(void);
virtual ~cStatus();
// These functions are called whenever the related status information changes:
static void MsgChannelChange(const cChannel *Channel);
static void MsgTimerChange(const cTimer *Timer, eTimerChange Change);
static void MsgChannelSwitch(const cDevice *Device, int ChannelNumber, bool LiveView);
static void MsgRecording(const cDevice *Device, const char *Name, const char *FileName, bool On);
static void MsgReplaying(const cControl *Control, const char *Name, const char *FileName, bool On);
static void MsgSetVolume(int Volume, bool Absolute);
static void MsgSetAudioTrack(int Index, const char * const *Tracks);
static void MsgSetAudioChannel(int AudioChannel);
static void MsgSetSubtitleTrack(int Index, const char * const *Tracks);
static void MsgOsdClear(void);
static void MsgOsdTitle(const char *Title);
static void MsgOsdStatusMessage(const char *Message);
static void MsgOsdHelpKeys(const char *Red, const char *Green, const char *Yellow, const char *Blue);
static void MsgOsdItem(const char *Text, int Index);
static void MsgOsdCurrentItem(const char *Text);
static void MsgOsdTextItem(const char *Text, bool Scroll = false);
static void MsgOsdChannel(const char *Text);
static void MsgOsdProgramme(time_t PresentTime, const char *PresentTitle, const char *PresentSubtitle, time_t FollowingTime, const char *FollowingTitle, const char *FollowingSubtitle);
};
#endif //__STATUS_H