diff --git a/VDR-command-reference.md b/VDR-command-reference.md index 2e8a63b..cd23335 100644 --- a/VDR-command-reference.md +++ b/VDR-command-reference.md @@ -1,27 +1,25 @@ - - - +
- - - + + +
vdr(1)Video Disk Recordervdr(1)vdr(1)Video Disk Recordervdr(1)
-
-
-

-

vdr - the Video Disk Recorder

+
+
+

NAME

+

vdr - the Video Disk Recorder

-
-

-

vdr [options]

+
+

SYNOPSIS

+

vdr [options]

-
-

-

vdr implements a complete digital Set-Top Box and Video +

+

DESCRIPTION

+

vdr implements a complete digital Set-Top Box and Video Recorder. It can work with signals received from satellites (DVB-S) as well as cable (DVB-C) and terrestrial (DVB-T) signals.

-

At least one DVB card is required to run vdr. With it you +

At least one DVB card is required to run vdr. With it you can watch live TV while recording one or more other broadcasts from the same transponder. It is also possible to start watching a recorded programme before the live broadcast has ended (time shifting). In order to @@ -32,37 +30,37 @@ provides audio and video signal outputs, or you can use some third party plugin that implements software decoding of the MPEG data and displays it via the system's graphics adapter.

-

vdr uses an On Screen Display (OSD) to display its menus. +

vdr uses an On Screen Display (OSD) to display its menus. It can be controlled by the PC keyboard, the "Linux Infrared Remote Control" (LIRC), or any other means of remote control, implemented by a third party plugin.

-

Remote access is possible via the "Simple Video Disk Recorder +

Remote access is possible via the "Simple Video Disk Recorder Protocol" (SVDRP), which can be accessed on port 6419, for instance by telnet.

-
-

-
-
+
+

OPTIONS

+
+
-a cmd, --audio=cmd
Send Dolby Digital audio to stdin of command cmd.
-
+
--cachedir=dir
Save cache files in dir (default is to save them in the video directory).
-
+
--chartab=character_table
Set the character table to use for strings in the DVB data stream that don't begin with a character table indicator, but don't use the standard default character table (for instance ISO-8859-9).
-
+
-c dir, --config=dir
Read config files from directory dir (default is to read them from the video directory).
-
+
-d, --daemon
Run in daemon mode (implies --no-kbd).
-
+
-D num, --device=num
Use only the given DVB device (num = 0, 1, 2...). There may be several -D options (by default all DVB devices will be used). If -D- is given, no DVB devices will be used at all, independent of any other -D options.
-
+
--dirnames=path[,name[,enc]]
Set the maximum directory path length to path (default is the maximum value allowed on the system). If name is also given, it defines the maximum directory name length (default is the maximum value @@ -73,23 +71,23 @@ the video directory name and that of the actual recording directory is subtracted from path, to make sure the directory path will never become too long.
-
+
--edit=rec
Edit the given recording. rec must be the full path name of an existing recording. The program will return immediately after editing the recording.
-
+
-E file, --epgfile=file
Write the EPG data into the given file (default is epg.data in the cache directory). Use -E- to disable this. If file is a directory, the file epg.data will be created in that directory.
-
+
--filesize=size
Limit video files to size bytes (default is 2000M). This option is only useful in conjunction with --edit, and must precede that option to have an effect. size is an integer number and may be followed by one of the letters K, M, G or T to abbreviate Kilo-, Mega-, Giga- or Terabyte, respectively. The given value is silently limited to the program's internal minimum and maximum values.
-
+
--genindex=rec
Generate the index file for the given recording. rec must be the full path name of an existing recording. The recording must be in TS format. If the recording already has an index file, it will be deleted @@ -97,85 +95,85 @@ generating the index. Note that using this option while another instance of VDR is currently replaying the given recording, or if the recording has not been finished yet, may lead to unexpected results.
-
+
-g, --grab=dir
Write images from the SVDRP command GRAB into the given directory dir. dir must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if -g- is given, grabbing images to disk is disabled.
-
+
-h, --help
Print a help message and exit.
-
+
-i instance, --instance=instance
Use instance as the id of this VDR instance (default is 0). In an environment where several instances of VDR use the same video directory, this parameter can be set to a positive integer value that's unique for each instance, so that they won't interfere with each other in case they record exactly the same broadcast. The number given here will be part of the directory name in which the recordings will be stored.
-
+
-l level, --log=level
Set logging to level. 0 = no logging, 1 = errors only, 2 = errors and info, 3 = errors, info and debug. The default logging level is 3. If logging should be done to LOG_LOCALn instead of LOG_USER, add '.n' to LEVEL, as in 3.7 (n=0..7).
-
+
-L dir, --lib=dir
Search for plugins in directory dir (default is ./PLUGINS/lib). There can be several -L options with different dir values. Each of them will apply to the -P options following it.
-
+
--lirc[=path]
Use a LIRC remote control device. If path is omitted, vdr uses /var/run/lirc/lircd.
-
+
--localedir=dir
Search for locale files in dir (default is ./locale).
-
+
-m, --mute
Mute audio of the primary DVB device at startup.
-
+
--no-kbd
Don't use the keyboard as an input device.
-
+
-p port, --port=port
Use port for SVDRP. A value of 0 turns off SVDRP. The default SVDRP port is 6419. You need to edit the file svdrphosts.conf in order to enable access to the SVDRP port from hosts other than the localhosts. Note that this option only changes the TCP port used for SVDRP commands. The UDP port for discovering peer VDRs in the same network is always set to 6419 and can't be changed.
-
+
-P options, --plugin=options
Load a plugin, defined by the given options. The first word in options must be the name of an existing vdr plugin, optionally followed by a blank separated list of command line options for that plugin. If options contains any blanks, you need to enclose it in quotes, like for example -

vdr -P "abc -a -b xyz"

-

which would load a plugin named abc, giving it the +

vdr -P "abc -a -b xyz"

+

which would load a plugin named abc, giving it the command line options -a -b xyz. If you want to load all available plugins (without any particular options) you can use

-

vdr -P "*"

-

(note the quotes around the asterisk to prevent wildcard +

vdr -P "*"

+

(note the quotes around the asterisk to prevent wildcard expansion).

-
+
-r cmd, --record=cmd
Call cmd before and after a recording. See the file INSTALL for more information.
-
+
--resdir=dir
Read resource files from dir (default is to read them from the config directory).
-
+
--showargs[=dir]
Read command line arguments from dir (default is /etc/vdr/conf.d), display them to the console and exit.
-
+
-s cmd, --shutdown=cmd
Call cmd to shutdown the computer. See the file INSTALL for more information.
-
+
--split
Split edited files at the editing marks. This option is only useful in conjunction with --edit, and must precede that option to have an effect.
-
+
-t tty, --terminal=tty
Set the controlling terminal.
-
+
-u user, --user=user
Run as user user in case vdr was started as user 'root'. Starting vdr as 'root' is necessary if the system time shall be set from the transponder data, but for security reasons vdr can switch to a lesser privileged user id during normal operation. user can be a user name or a numerical id.
-
+
--updindex=rec
Update the index file for the given recording. rec must be the full path name of an existing recording. The recording must be in TS format. If the recording already has an index file, it will be checked whether it is @@ -184,37 +182,36 @@ updating the index. Note that using this option while another instance of VDR is currently replaying the given recording, or if the recording has not been finished yet, may lead to unexpected results.
-
+
--userdump
Allow coredumps if -u is given (only for debugging).
-
+
--vfat
For backwards compatibility (same as --dirnames= 250,40,1).
-
+
-v dir, --video=dir
Use dir as video directory. The default is /video.
-
+
-V, --version
Print version information and exit.
-
+
-w sec, --watchdog=sec
Activate the watchdog timer with a timeout of sec seconds. A value of 0 (default) disables the watchdog.
-

If started without any options, vdr tries to read command line +

If started without any options, vdr tries to read command line options from files named '*.conf' in the directory /etc/vdr/conf.d. Files are read in alphabetical order. See vdr(5) for details.

-
-

-
-
SIGINT, SIGTERM
Program exits with status 0.
-
+
SIGHUP
Program exits with status 1. This can be used to force a reload, for example if an update has been installed.
-
-

-
+
+

EXIT STATUS

+
0
Successful program execution.
1
@@ -224,74 +221,75 @@
An non-recoverable error has been detected, vdr has given up.
-
-

-
-
+
+

FILES

+
+
channels.conf
Channel configuration.
-
+
timers.conf
Timer configuration.
-
+
setup.conf
User definable setup.
-
+
commands.conf
User definable commands (executed from the Commands menu).
-
+
svdrphosts.conf
SVDRP host configuration, defining which hosts or networks are given access to the SVDRP port.
-
+
marks
Contains the editing marks defined for a recording.
-
+
info
Contains a description of the recording.
-
+
resume
Contains the index into the recording where the last replay session left off.
-
+
index
Contains the file number, offset and type of each frame of the recording.
-
+
remote.conf
Contains the key assignments for the remote control.
-
+
keymacros.conf
Contains user defined remote control key macros.
00001.ts ... 65535.ts
The actual data files of a recording.
-
+
epg.data
Contains all current EPG data. Can be used for external processing and will also be read at program startup to have the full EPG data available immediately.
+
donerecs.data
+
Contains the names of recordings that have been done by pattern timers + with '@' as the first character of the pattern. File names are appended to + this file after a recording has finished, and the entire file is read upon + startup of VDR.
.update
If this file is present in the video directory, its last modification time will be used to trigger an update of the list of recordings in the "Recordings" menu.
-
-

-

vdr(5),svdrpsend(1)

+
+

SEE ALSO

+

vdr(5),svdrpsend(1)

-
-

-

Written by Klaus Schmidinger, with contributions from many others. +

+

AUTHOR

+

Written by Klaus Schmidinger, with contributions from many others. See the file CONTRIBUTORS in the vdr source distribution.

-
-

-

Report bugs to <vdr-bugs@tvdr.de>.

+
+

REPORTING BUGS

+

Report bugs to <vdr-bugs@tvdr.de>.

-
-

-

Copyright © 2018 Klaus Schmidinger.

-

This is free software; see the source for copying conditions. +

+

COPYRIGHT

+

Copyright © 2021 Klaus Schmidinger.

+

This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

- +
- - + +
15 Apr 20182.427 Dec 20212.6
- - diff --git a/VDR-file-formats-and-conventions.md b/VDR-file-formats-and-conventions.md index 4d6c9bf..b4ee25f 100644 --- a/VDR-file-formats-and-conventions.md +++ b/VDR-file-formats-and-conventions.md @@ -1,83 +1,81 @@ - - - +
- - - + + +
vdr(5)Video Disk Recorder Filesvdr(5)vdr(5)Video Disk Recorder Filesvdr(5)
-
-
-

-

vdr_files - the Video Disk Recorder Files

+
+
+

NAME

+

vdr_files - the Video Disk Recorder Files

-
-

-

This page describes the formats of the various files vdr +

+

DESCRIPTION

+

This page describes the formats of the various files vdr uses to store configuration data and recordings.

-
-

-
-

-

The file channels.conf contains the channel configuration. +

+

SYNTAX

+
+

CHANNELS

+

The file channels.conf contains the channel configuration. Each line defines either a group delimiter or a channel.

-

A group delimiter is a line starting with a ':' as the very +

A group delimiter is a line starting with a ':' as the very first character, followed by arbitrary text. Example:

-

:First group

-

Group delimiters may also be used to specify the number of the +

:First group

+

Group delimiters may also be used to specify the number of the next channel. To do this, the character '@' and a number must immediately follow the ':', as in

-

:@201 First group

-

The given number must be larger than the number of any previous +

:@201 First group

+

The given number must be larger than the number of any previous channel (otherwise it is silently ignored).

-

A group delimiter can also be used to just set the next channel's +

A group delimiter can also be used to just set the next channel's number, without an explicit delimiter text, as in

-

:@201

-

Such a delimiter will not appear in the Channels menu.

-

A channel definition is a line with channel data, where the +

:@201

+

Such a delimiter will not appear in the Channels menu.

+

A channel definition is a line with channel data, where the fields are separated by ':' characters. Example:

-

- +

+
RTL Television,RTL;RTL World:12187:hC34M2O0S0:S19.2E:27500:163=2:104=deu;106=deu:105:0:12003:1:1089:0
-

The line number of a channel definition (not counting group +

The line number of a channel definition (not counting group separators, and based on a possible previous '@...' parameter) defines the channel's number in OSD menus and the timers.conf file.

-

The fields in a channel definition have the following meaning +

The fields in a channel definition have the following meaning (from left to right):

-
-
+
+
Name
The channel's name (if the name originally contains a ':' character it has to be replaced by '|'). Some TV stations provide a way of deriving a "short name" from the channel name, which can be used in situations where there is not much space for displaying a long name. If a short name is available for this channel, it follows the full name and is delimited by a comma, as in -

RTL Television,RTL:...

-

If the short name itself would contain a comma, it is replaced +

RTL Television,RTL:...

+

If the short name itself would contain a comma, it is replaced with a '.'. Note that some long channel names may contain a comma, so the delimiting comma is always the rightmost one.

-

If present, the name of the service provider or +

If present, the name of the service provider or "bouquet" is appended to the channel name, separated by a semicolon, as in

-

RTL Television,RTL;RTL World:...

+

RTL Television,RTL;RTL World:...

-
+
Frequency
The transponder frequency (as an integer). For DVB-S this value is in MHz. For DVB-C and DVB-T it can be given either in MHz, kHz or Hz (the actual value given will be multiplied by 1000 until it is larger than 1000000).
-
+
Parameters
Various parameters, depending on whether this is a DVB-S, DVB-C or DVB-T channel. Each parameter consist of a key character, followed by an integer number that represents the actual setting of that parameter. The valid key characters, their meaning (and allowed values) are - +
@@ -153,24 +151,24 @@
B Bandwidth (1712, 5, 6, 7, 8, 10)hierarchY (0, 1, 2, 4)
-

Bandwidth: The bandwidth of the channel in MHz (1712 in +

Bandwidth: The bandwidth of the channel in MHz (1712 in kHz): (DVB-T/DVB-T2 only).

-

Code rate high priority: Forward Error Correction (FEC) +

Code rate high priority: Forward Error Correction (FEC) of the high priority stream (DVB-T/DVB-T2). For DVB-S/DVB-S2 this parameter specifies the inner FEC scheme. 12 = 1/2, 23 = 2/3, 34 = 3/4, ...

-

Code rate low priority: Forward Error Correction (FEC) +

Code rate low priority: Forward Error Correction (FEC) of the low priority stream (DVB-T/DVB-T2 only). If no hierarchy is used, set to 0.

-

Guard interval: The guard interval value (DVB-T only): +

Guard interval: The guard interval value (DVB-T only): 4 = 1/4, 8 = 1/8, 16 = 1/16, 32 = 1/32, 128 = 1/128, 19128 = 19/128, 19256 = 19/256.

-

Inversion: Specifies whether the DVB frontend needs +

Inversion: Specifies whether the DVB frontend needs spectral inversion (DVB-T and DVB-C only). This is frontend specific, if in doubt, omit.

-

Modulation: Specifies the modulation/constellation of +

Modulation: Specifies the modulation/constellation of the channel as follows:

- +
@@ -220,100 +218,100 @@
2 QPSK (DVB-S, DVB-S2, DVB-T, DVB-T2, ISDB-T)QAM256 (DVB-C, DVB-T2)
-

Pilot mode: The pilot mode (0 = "off", 1 = +

Pilot mode: The pilot mode (0 = "off", 1 = "on", 999 = "auto") for DVB-S2 multiplex (DVB-S2 only).

-

Rolloff: The Nyquist filter rolloff factor for DVB-S +

Rolloff: The Nyquist filter rolloff factor for DVB-S (35) and DVB-S2 (35, 25, 20), 35 = 0.35, 25 = 0.25, 20 = 0.20, DVB-S/DVB-S2 default value is 0.35

-

Stream id: Input Stream Identifier (ISI) (0-255) +

Stream id: Input Stream Identifier (ISI) (0-255) for DVB-S2 multiplex or Physical Layer Pipe (PLP) id (0-255) for DVB-T2 multiplex (DVB-S2/DVB-T2 only, with devices that support "multi streaming").

-

T2 System id: Unique identifier (0-65535) of T2 +

T2 System id: Unique identifier (0-65535) of T2 system within the DVB network (DVB-T2).

-

Transmission mode: Number of DVB-T OFDM carriers, 32 = +

Transmission mode: Number of DVB-T OFDM carriers, 32 = 32k, 16 = 16k, 8 = 8k, 4 = 4k, 2 = 2k, 1 = 1k. If in doubt, try 8k.

-

SISO/MISO mode: Specifies the +

SISO/MISO mode: Specifies the Single-Input/Multiple-Input Single-Output mode (0 = SISO, 1 = MISO) (DVB-T2).

-

Hierarchy: If set to 1, this transponder uses two +

Hierarchy: If set to 1, this transponder uses two streams, high priority and low priority. If in doubt, try 0 (off). (DVB-T/DVB-T2 only).

-

Delivery System: The delivery system (0 = "first +

Delivery System: The delivery system (0 = "first generation" (DVB-S/DVB-T), 1 = "second generation" (DVB-S2/DVB-T2).

-

Polarization: Satellite antenna polarization. H = +

Polarization: Satellite antenna polarization. H = horizontal, V = vertical, R = circular right, L = circular left.

-

The polarization parameters have no integer numbers following +

The polarization parameters have no integer numbers following them. This is for compatibility with files from older versions and also to keep the DVB-S entries as simple as possible.

-

The special value 999 is used for +

The special value 999 is used for "automatic", which means the driver will automatically determine the proper value (if possible).

-

An example of a parameter field for a DVB-T channel might look +

An example of a parameter field for a DVB-T channel might look like this: B8C23D12G8M16T8Y0S0

-

An example of a parameter field for a DVB-T2 channel might +

An example of a parameter field for a DVB-T2 channel might look like this: B8C23D12G8M16T8Y0P0S1

-

An example of a parameter field for a DVB-C channel might look +

An example of a parameter field for a DVB-C channel might look like this: C0M64

-

An example of a parameter field for a DVB-S channel might look +

An example of a parameter field for a DVB-S channel might look like this: HC56M2O35S0

-

An example of a parameter field for a DVB-S2 channel might +

An example of a parameter field for a DVB-S2 channel might look like this: HC910M2O35S1

-

Plugins that implement devices that need their own set of +

Plugins that implement devices that need their own set of parameters may store those in the parameters string in arbitrary format (not necessarily the "character/number" format listed above). The only condition is that the string may not contain colons (':') or newline characters.

-
+
Source
The signal source of this channel, as defined in the file sources.conf.
-
+
Srate
The symbol rate of this channel (DVB-S and DVB-C only).
-
+
VPID
The video PID (set to '0' for radio channels). If this channel uses a separate PCR PID, it follows the VPID, separated by a plus sign, as in -

...:164+17:...

-

If this channel has a video mode other than 0, the mode +

...:164+17:...

+

If this channel has a video mode other than 0, the mode follows the pids, separated by an '=' sign, as in

-

...:164+17=27:...

+

...:164+17=27:...

-
+
APID
The audio PID (either one number, or several, separated by commas). If this channel also carries Dolby Digital sound, the Dolby PIDs follow the audio PIDs, separated by a semicolon, as in -

...:101,102;103,104:...

-

If certain audio PIDs broadcast in specific languages, the +

...:101,102;103,104:...

+

If certain audio PIDs broadcast in specific languages, the language codes for these can be appended to the individual audio or Dolby PID, separated by an '=' sign, as in

-

...:101=deu,102=eng;103=deu,104=eng:...

-

Some channels broadcast two different languages in the two +

...:101=deu,102=eng;103=deu,104=eng:...

+

Some channels broadcast two different languages in the two stereo channels, which can be indicated by adding a second language code, delimited by a '+' sign, as in

-

...:101=deu,102=eng+spa;103=deu,104=eng:...

-

The audio type is appended with a separating '@' character, as +

...:101=deu,102=eng+spa;103=deu,104=eng:...

+

The audio type is appended with a separating '@' character, as in

-

...:101=deu@4,102=eng+spa@4,105=@4:...

-

Note that if there is no language code, there still is the +

...:101=deu@4,102=eng+spa@4,105=@4:...

+

Note that if there is no language code, there still is the separating '=' if there is an audio type.

-

+

-
+
TPID
The teletext PID. If this channel also carries DVB subtitles, the DVB subtitling PIDs follow the teletext PID, separated by a semicolon, as in -

...:201;2001,2002:...

-

If certain subtitling PIDs broadcast in specific languages, +

...:201;2001,2002:...

+

If certain subtitling PIDs broadcast in specific languages, the language codes for these can be appended to the individual subtitling PID, separated by an '=' sign, as in

-

...:201;2001=deu,2002=eng:...

-

+

...:201;2001=deu,2002=eng:...

+

-
Conditional access
A hexadecimal integer defining how this channel can be accessed: - +
@@ -335,31 +333,31 @@ will be automatically replaced by the actual CA system identifiers received from the data stream. If there is more than one CA system id broadcast, they will be separated by commas, as in -

...:1702,1722,1801:...

-

The values are in hex because that's the way they are defined +

...:1702,1722,1801:...

+

The values are in hex because that's the way they are defined in the "ETR 162" document. Leading zeros may be omitted.

-
+
SID
The Service ID of this channel.
-
+
NID
The Network ID of this channel.
-
+
TID
The Transport stream ID of this channel.
-
+
RID
The Radio ID of this channel (typically 0, may be used to distinguish channels where NID, TID and SID are all equal).
-

A particular channel can be uniquely identified by its +

A particular channel can be uniquely identified by its channel ID, which is a string that looks like this:

-

S19.2E-1-1089-12003-0

-

The components of this string are the Source (S19.2E), +

S19.2E-1-1089-12003-0

+

The components of this string are the Source (S19.2E), NID (1), TID (1089), SID (12003) and RID (0) as defined above. The last part can be omitted if it is 0, so the above example could also be written as S19.2E-1-1089-12003).
The channel ID is used in the timers.conf and epg.data files to properly identify the channels.

-

If a channel has both NID and TID set to 0, the +

If a channel has both NID and TID set to 0, the channel ID will use the Frequency instead of the TID. For satellite channels an additional offset of 100000, 200000, 300000 or 400000 is added to that number, depending on the @@ -368,39 +366,47 @@ frequency is used for two different transponders, with opposite polarization.

-
-

-

The file timers.conf contains the timer setup. Each line +

+

TIMERS

+

The file timers.conf contains the timer setup. Each line contains one timer definition, with individual fields separated by ':' characters. Example:

-

1:10:-T-----:2058:2150:50:5:Quarks & Co:

-

The fields in a timer definition have the following meaning (from +

1:10:-T-----:2058:2150:50:5:Quarks & Co:

+

The fields in a timer definition have the following meaning (from left to right):

-
-
+
+
Flags
The individual bits in this field have the following meaning: -
0000 Free To Air
+
- + - + - + - + + + + + + + + +
10x0001 the timer is active (and will record if it hits)
20x0002 this is an instant recording timer
40x0004 this timer uses VPS
80x0008 this timer is currently recording (may only be up-to-date with SVDRP)
0x0010this timer was spawned from a pattern timer
0x0020this timer will store the recording's name in donerecs.data
-

All other bits are reserved for future use.

+

All other bits are reserved for future use.

-
+
Channel
The channel to record from. This is either the channel number as shown in the on-screen menus, or a complete channel ID. When reading timers.conf any channel numbers will be mapped to the respective @@ -409,23 +415,23 @@ creation of timers when manually editing timers.conf. Also, when timers are listed via SVDRP commands, the channels are given as numbers.
-
+
Day
The day when this timer shall record. -

If this is a `single-shot' timer, this is the date on which +

If this is a `single-shot' timer, this is the date on which this timer shall record, given in ISO notation (YYYY-MM-DD), as in:

-

2005-03-19

-

For compatibility with earlier versions of VDR this may also +

2005-03-19

+

For compatibility with earlier versions of VDR this may also be just the day of month on which this timer shall record (must be in the range 1...31).

-

In case of a `repeating' timer this is a string consisting of +

In case of a `repeating' timer this is a string consisting of exactly seven characters, where each character position corresponds to one day of the week (with Monday being the first day). The character '-' at a certain position means that the timer shall not record on that day. Any other character will cause the timer to record on that day. Example:

-

MTWTF--

-

will define a timer that records on Monday through Friday and +

MTWTF--

+

will define a timer that records on Monday through Friday and does not record on weekends. Note that only letters may be used here, no digits. For compatibility with timers created with earlier versions of VDR, the same result could be achieved with ABCDE-- (which was @@ -433,12 +439,12 @@ version 1.5.3 VDR can use UTF-8 characters to present data to the user, but the weekday encoding in the timers.conf file always uses single byte characters.

-

The day definition of a `repeating' timer may be followed by +

The day definition of a `repeating' timer may be followed by the date when that timer shall hit for the first time. The format for this is @YYYY-MM-DD, so a complete definition could look like this:

-

MTWTF--@2002-02-18

-

which would implement a timer that records Monday through +

MTWTF--@2002-02-18

+

which would implement a timer that records Monday through Friday, and will hit for the first time on or after February 18, 2002. This first day feature can be used to disable a repeating timer for a couple of days, or for instance to define a new Mon...Fri timer on @@ -446,30 +452,30 @@ first day date given need not be that of a day when the timer would actually hit.

-
+
Start
A four digit integer defining when this timer shall start recording. The format is hhmm, so 1430 would mean "half past two" in the afternoon.
-
+
Stop
A four digit integer defining when this timer shall stop recording. The format is the same as for the start time.
-
+
Priority
An integer in the range 0...99, defining the priority of this timer and of recordings created by this timer. 0 represents the lowest value, 99 the highest. The priority is used to decide which timer shall be started in case there are two or more timers with the exact same start time. The first timer in the list with the highest priority will be used. -

This value is also stored with the recording and is later used +

This value is also stored with the recording and is later used to decide which recording to remove from disk in order to free space for a new recording. If the disk runs full and a new recording needs more space, an existing recording with the lowest priority (and which has exceeded its guaranteed lifetime) will be removed.

-

If all available DVB cards are currently occupied, a timer +

If all available DVB cards are currently occupied, a timer with a higher priority will interrupt the timer with the lowest priority in order to start recording.

-
+
Lifetime
The guaranteed lifetime (in days) of a recording created by this timer. 0 means that this recording may be automatically deleted at any time by a new recording with higher priority. 99 means that @@ -477,19 +483,65 @@ range 1...98 means that this recording may not be automatically deleted in favour of a new recording, until the given number of days since the start time of the recording has passed by.
-
+
File
The file name this timer will give to a recording. If the name contains any ':' characters, these have to be replaced by '|'. If the name shall contain subdirectories, these have to be delimited by '~' (since the '/' character may be part of a regular programme name). -

The special keywords TITLE and EPISODE, if +

The special keywords TITLE and EPISODE, if present, will be replaced by the title and episode information from the EPG data at the time of recording (if that data is available). If at the time of recording either of these cannot be determined, TITLE will default to the channel name, and EPISODE will default to a blank.

+

The file name can be prepended with a pattern, enclosed in + curly braces, as in

+

{Columbo}Movies~TITLE

+

which makes this a "pattern timer". A pattern timer + records every event on the given channel where the title contains the + pattern (case sensitive). The following special characters can be used + in a pattern:

+ + + + + + + + + + + + + + + + + +
^anchor to the beginning of the event's title
$anchor to the end of the event's title
*match every event
@avoid duplicate recordings
+

If @ is used, it must be the very first character of + the pattern. If both @ and ^ are used, @ must come + first. If * is used, it must be the only character in the pattern + and may only be prepended with @.

+

In addition to TITLE and EPISODE you can use the following + macros to compose the file name (the curly braces are part of the + macros):

+ + + + + + + + + + + + + +
{<}everything before the matching pattern
{>}everything after the matching pattern
{=}the matching pattern itself (just for completeness)
-
Auxiliary data
An arbitrary string that can be used by external applications to store any kind of data related to this timer. The string must not contain any @@ -497,15 +549,15 @@ written into the info file of the recording with the '@' tag.
-
-

-

The file sources.conf defines the codes to be used in the +

+

SOURCES

+

The file sources.conf defines the codes to be used in the Source field of channels in channels.conf and assigns descriptive texts to them. Example:

-

S19.2E Astra 1

-

Anything after (and including) a '#' character is comment.

-

The first character of the code must be one of

- +

S19.2E Astra 1

+

Anything after (and including) a '#' character is comment.

+

The first character of the code must be one of

+
@@ -523,38 +575,38 @@
A ATSCTerrestrial
-

and is followed by further data pertaining to that particular +

and is followed by further data pertaining to that particular source. In case of Satellite this is the orbital position in degrees, followed by E for east or W for west. Plugins may define additional sources, using other characters in the range 'A'...'Z'.

-
-

-

The file diseqc.conf defines the DiSEqC control +

+

DISEQC

+

The file diseqc.conf defines the DiSEqC control sequences to be sent to the DVB-S card in order to access a given satellite position and/or band. Example:

-

S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t

-

Anything after (and including) a '#' character is comment.

-

The first word in a parameter line must be one of the codes +

S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t

+

Anything after (and including) a '#' character is comment.

+

The first word in a parameter line must be one of the codes defined in the file sources.conf and tells which satellite this line applies to.

-

Following is the "switch frequency" of the LNB (slof), +

Following is the "switch frequency" of the LNB (slof), which is the transponder frequency up to which this entry shall be used; the first entry with an slof greater than the actual transponder frequency will be used. Typically there is only one slof per LNB, but the syntax allows any number of frequency ranges to be defined. Note that there should be a last entry with the value 99999 for each satellite, which covers the upper frequency range.

-

The third parameter defines the polarization to which this entry +

The third parameter defines the polarization to which this entry applies. It can be either H for horizontal, V for vertical, L for circular left or R for circular right.

-

The fourth parameter specifies the "local oscillator +

The fourth parameter specifies the "local oscillator frequency" (lof) of the LNB to use for the given frequency range. This number will be subtracted from the actual transponder frequency when tuning to the channel.

-

The rest of the line holds the actual sequence of DiSEqC actions +

The rest of the line holds the actual sequence of DiSEqC actions to be taken. The code letters used here are

- +
@@ -593,35 +645,34 @@ - +
t 22kHz tone offwait nn milliseconds (nn may be any positive integer number)
[xx ...][xx ...] hex code sequence (max. 6)
There can be any number of actions in a line, including none at all - in which case the entry would be used only to set the LOF to use for the given frequency range and polarization. -

By default it is assumed that every DVB-S device can receive every +

By default it is assumed that every DVB-S device can receive every satellite. If this is not the case in a particular setup, lines of the form

-

1 2 4:

-

may be inserted in the diseqc.conf file, defining the +

1 2 4:

+

may be inserted in the diseqc.conf file, defining the devices that are able to receive the satellites following thereafter. In this case, only the devices 1, 2 and 4 would be able to receive any satellites following this line and up to the next such line, or the end of the file. Devices may be listed more than once.

-
-

-

The file scr.conf contains the channel definitions of the +

+

SATELLITE CHANNEL ROUTING (SCR)

+

The file scr.conf contains the channel definitions of the SCR device in use. The format is

-

channel frequency [pin]

-

where channel is the SCR device's channel index (0-7), frequency +

channel frequency [pin]

+

where channel is the SCR device's channel index (0-7), frequency is the user band frequency of the given channel, and pin is an optional pin number (0-255). The actual values are device specific and can be found in the SCR device's manual.

-

Examples:

-

+

Examples:

+

0 1284
 1 1400
 2 1516
@@ -631,37 +682,35 @@ There can be any number of actions in a line, including none at all - in which
 6 1980
 7 2096
-

By default it is assumed that the SCR configurations apply to all +

By default it is assumed that the SCR configurations apply to all devices, and each device will pick one. If you have several SCR sat cables connected to one VDR machine, or if you want to explicitly assign the SCR channels to your devices, lines of the form

-

1 2 4:

-

may be inserted in the scr.conf file, defining the devices +

1 2 4:

+

may be inserted in the scr.conf file, defining the devices that are allowed to use the SCR channels thereafter. In this case, only the devices 1, 2 and 4 would be allowed to use the SCR channels following this line and up to the next such line, or the end of the file. If a device is listed more than once, only its first appearance counts.

-
-

-

The file remote.conf contains the key assignments for all +

+

REMOTE CONTROL KEYS

+

The file remote.conf contains the key assignments for all remote control units. Each line consists of one key assignment in the following format:

-

name.key code

-

where name is the name of the remote control (for instance +

name.key code

+

where name is the name of the remote control (for instance KBD for the PC keyboard, or LIRC for the "Linux Infrared Remote Control"), key is the name of the key that is defined (like Up, Down, Menu etc.), and code is a character string that this remote control delivers when the given key is pressed.

-
-

-

The file keymacros.conf contains user defined macros that +

+

KEY MACROS

+

The file keymacros.conf contains user defined macros that will be executed whenever the given key is pressed. The format is

-

macrokey [@plugin] key1 key2 key3...

-

where macrokey is the key that shall initiate execution of +

macrokey [@plugin] key1 key2 key3...

+

where macrokey is the key that shall initiate execution of this macro and can be one of Up, Down, Ok, Back, Left, Right, Red, Green, Yellow, Blue, 0...9 or User1...User9. The rest of @@ -670,8 +719,8 @@ There can be any number of actions in a line, including none at all - in which used to automatically select the given plugin. plugin is the name of the plugin, exactly as given in the -P option when starting VDR. There can be only one @plugin per key macro. For instance

-

User1 @abc Down Down Ok

-

would call the main menu function of the "abc" plugin +

User1 @abc Down Down Ok

+

would call the main menu function of the "abc" plugin and execute two "Down" key presses, followed by "Ok".
Note that the color keys will only execute their macro function in @@ -679,53 +728,53 @@ There can be any number of actions in a line, including none at all - in which active). The User1...User9 keys will always execute their macro function. There may be up to 15 keys in such a key sequence.

-
-

-

The file folders.conf contains the definitions of folders +

+

FOLDERS

+

The file folders.conf contains the definitions of folders that can be used in the "Edit timer" menu. Each line contains one folder definition. Leading whitespace and everything after and including a '#' is ignored. A line ending with '{' defines a sub folder (i.e. a folder that contains other folders), and a line consisting of only '}' ends the definition of a sub folder.

-

Example:

-

+

Example:

+

Daily {
-

+
   News
-

+
   Soaps
-

+
   }
 Archive {
-

+
   Movies
-

+
   Sports
-

+
   Sci-Fi {
-

+
     Star Trek
-

+
     U.F.O.
-

+
     }
-

+
   }
 Comedy
 Science
-

Note that these folder definitions are only used to set the file +

Note that these folder definitions are only used to set the file name under which a timer will store its recording. Changing these definitions in any way has no effect on existing timers or recordings.

-
-

-

The file commands.conf contains the definitions of commands +

+

COMMANDS

+

The file commands.conf contains the definitions of commands that can be executed from the vdr main menu's "Commands" option. Each line contains one command definition in the following format:

-

title : command

-

where title is the string that will be displayed in the +

title : command

+

where title is the string that will be displayed in the "Commands" menu, and command is the actual command string that will be executed when this option is selected. The delimiting ':' may be surrounded by any number of white space characters. If title ends @@ -733,141 +782,138 @@ Science executing the command. This can be used for commands that might have serious results (like deleting files etc) to make sure they are not executed inadvertently.

-

Everything following (and including) a '#' character is considered +

Everything following (and including) a '#' character is considered to be comment.

-

You can have nested layers of command menus by surrounding a +

You can have nested layers of command menus by surrounding a sequence of commands with '{'...'}' and giving it a title, as in

-

+

My Commands {
-

+
   First list {
-

+
     Do something: some command
-

+
     Do something else: another command
-

+
     }
-

+
   Second list {
-

+
     Even more: yet another command
-

+
     So much more: and yet another one
-

+
     }
-

+
   }
-

Command lists can be nested to any depth.

-

By default the menu entries in the "Commands" menu will +

Command lists can be nested to any depth.

+

By default the menu entries in the "Commands" menu will be numbered '1'...'9' to make them selectable by pressing the corresponding number key. If you want to use your own numbering scheme (maybe to skip certain numbers), just precede the titles with the numbers of your choice. vdr will suppress its automatic numbering if the first entry in commands.conf starts with a digit in the range '1'...'9', followed by a blank.

-

In order to avoid error messages to the console, every command +

In order to avoid error messages to the console, every command should have stderr redirected to stdout. Everything the command prints to stdout will be displayed in a result window, with title as its title.

-

Examples:

-

+

Examples:

+

Check for new mail?: /usr/local/bin/checkmail 2>&1
 CPU status: /usr/local/bin/cpustatus 2>&1
 Disk space: df -h | grep '/video' | awk '{ print 100 - $5 "% free"; }'
 Calendar: date;echo;cal
-

Note that the commands 'checkmail' and 'cpustatus' are only +

Note that the commands 'checkmail' and 'cpustatus' are only examples! Don't send emails to the author asking where to find these ;-)
The '?' at the end of the "Check for new mail?" entry will prompt the user whether this command shall really be executed.

-
-

-

The file reccmds.conf can be used to define commands that +

+

RECORDING COMMANDS

+

The file reccmds.conf can be used to define commands that can be applied to the currently highlighted recording in the "Recordings" menu. The syntax is exactly the same as described for the file commands.conf. When executing a command, the directory name of the recording will be appended to the command string, separated by a blank and enclosed in single quotes.

-
-

-

The file svdrphosts.conf contains the IP numbers of all +

+

SVDRP HOSTS

+

The file svdrphosts.conf contains the IP numbers of all hosts that are allowed to access the SVDRP port. Each line contains one IP number in the format

-

IP-Address[/Netmask]

-

where IP-Address is the address of a host or a network in +

IP-Address[/Netmask]

+

where IP-Address is the address of a host or a network in the usual dot separated notation (as in 192.168.100.1). If the optional Netmask is given only the given number of bits of IP-Address are taken into account. This allows you to grant SVDRP access to all hosts of an entire network. Netmask can be any integer from 1 to 32. The special value of 0 is only accepted if the IP-Address is 0.0.0.0, because this will give access to any host (USE THIS WITH CARE!).

-

Everything following (and including) a '#' character is considered +

Everything following (and including) a '#' character is considered to be comment.

-

Examples:

-

+

Examples:

+

127.0.0.1        # always accept localhost
 192.168.100.0/24 # any host on the local net
 204.152.189.113  # a specific host
 0.0.0.0/0        # any host on any net (USE WITH CARE!)
-
-

-

The file setup.conf contains the basic configuration +

+

SETUP

+

The file setup.conf contains the basic configuration options for vdr. Each line contains one option in the format "Name = Value". See the MANUAL file for a description of the available options.

-
-

-

The files themes/<skin>-<theme>.theme in the +

+

THEMES

+

The files themes/<skin>-<theme>.theme in the config directory contain the color theme definitions for the various skins. In the actual file names <skin> will be replaced by the name if the skin this theme belongs to, and <theme> will be the name of this theme. Each line in a theme file contains one option in the format "Name = Value". Anything after (and including) a '#' character is comment.

-

The definitions in a theme file are either colors or a +

The definitions in a theme file are either colors or a description.
Colors are in the form

-

clrTitle = FF123456

-

where the name (clrTitle) is one of the names defined in the +

clrTitle = FF123456

+

where the name (clrTitle) is one of the names defined in the source code of the skin that uses this theme, through the THEME_CLR() macro. The value (FF123456) is an eight digit hex number that consist of four bytes, representing alpha (transparency), red, green and blue component of the color. An alpha value of 00 means the color will be completely transparent, while FF means it will be opaque. An RGB value of 000000 results in black, while FFFFFF is white.

-

A description can be given as

-

Description = Shades of blue

-

and will be used in the Setup/OSD menu to select a theme for a +

A description can be given as

+

Description = Shades of blue

+

and will be used in the Setup/OSD menu to select a theme for a given skin. The description should give the user an idea what this theme will be like (for instance, in the given example it would use various shades of blue), and shouldn't be too long to make sure it fits on the Setup screen. The default description always should be given in English. If you want, you can provide language specific descriptions as

-

Description.eng = Shades of blue +

Description.eng = Shades of blue
Description.ger = Blautöne

-

where the language code is added to the keyword +

where the language code is added to the keyword "Description", separated by a dot. You can enter as many language specific descriptions as you like, but only those that have a corresponding locale messages file will be actually used. If a theme file doesn't contain a Description, the name of the theme (as given in the theme's file name) will be used.

-
-

-

The files 00001.ts...65535.ts are the actual +

+

AUDIO/VIDEO DATA

+

The files 00001.ts...65535.ts are the actual recorded data files. In order to keep the size of an individual file below a given limit, a recording may be split into several files. The contents of these files is Transport Stream (TS) and contains data packets that @@ -875,18 +921,18 @@ Calendar: date;echo;cal broadcast, with a generated PAT/PMT inserted right before every independent frame.

-
-

-

The file index (if present in a recording directory) +

+

INDEX

+

The file index (if present in a recording directory) contains the (binary) index data into each of the the recording files 00001.ts...65535.ts. It is used during replay to determine the current position within the recording, and to implement skipping and fast forward/back functions. See the definition of the cIndexFile class for details about the actual contents of this file.

-
-

-

The file info (if present in a recording directory) +

+

INFO

+

The file info (if present in a recording directory) contains a description of the recording, derived from the EPG data at recording time (if such data was available). The Aux field of the corresponding timer (if given) is copied into this file, using the '@' tag. @@ -895,9 +941,9 @@ Calendar: date;echo;cal the lowercase tags ('c' and 'e') will not appear in an info file. Lines tagged with '#' are ignored and can be used by external tools to store arbitrary information.

-

In addition to the tags used in the epg.data file, the +

In addition to the tags used in the epg.data file, the following tag characters are defined:

- +
@@ -910,53 +956,61 @@ Calendar: date;echo;cal + + + +
F <frame rate>P <priority>
O<errors>
@ <auxiliary data>
+

The 'O' tag contains the number of errors that occurred during + recording. If it is zero, the recording can be safely considered error free. + The higher the value, the more damaged the recording is. If this is an + edited recording, the number of errors is that of the original + recording.

-
-

-

The file resume (if present in a recording directory) +

+

RESUME

+

The file resume (if present in a recording directory) contains the position within the recording where the last replay session left off. The file consists of tagged lines that describe the various parameters necessary to pick up replay where it left off.

-

The following tag characters are defined:

- +

The following tag characters are defined:

+
I <offset into the file index>
-
-

-

The file marks (if present in a recording directory) +

+

MARKS

+

The file marks (if present in a recording directory) contains the editing marks defined for this recording. Each line contains the definition of one mark in the following format:

-

hh:mm:ss.ff comment

-

where hh:mm:ss.ff is a frame position within the recording, +

hh:mm:ss.ff comment

+

where hh:mm:ss.ff is a frame position within the recording, given as "hours, minutes, seconds and (optional) frame number". comment can be any string and may be used to describe this mark. If present, comment must be separated from the frame position by at least one blank.

-

The lines in this file need not necessarily appear in the correct +

The lines in this file need not necessarily appear in the correct temporal sequence, they will be automatically sorted by time index.

-

If a frame position doesn't point to an I-frame of the +

If a frame position doesn't point to an I-frame of the corresponding recording, it will be shifted towards the next I-frame (either up or down, whichever is closer).

-

CURRENT RESTRICTIONS:

-

- the comment is currently not used by VDR

+

CURRENT RESTRICTIONS:

+

- the comment is currently not used by VDR

-
-

-

The file .sort (if present in a directory) contains an +

+

SORT MODE

+

The file .sort (if present in a directory) contains an integer number defining the mode by which this directory shall be sorted when presented in a menu.

-

The following values are defined:

- +

The following values are defined:

+
@@ -967,25 +1021,23 @@ Calendar: date;echo;cal
0 sort by name
-
-

-

The file .timer (if present in a recording directory) +

+

RECORDING TIMER

+

The file .timer (if present in a recording directory) contains the full id of the timer that is currently recording into this directory. Timer ids are of the form

-

id@hostname

-

where id is the timer's numerical id on the VDR with the +

id@hostname

+

where id is the timer's numerical id on the VDR with the name hostname. This file is created when the timer starts recording, and is deleted when it ends.

-
-

-

The file epg.data contains the EPG data in an easily +

+

EPG DATA

+

The file epg.data contains the EPG data in an easily parsable format. The first character of each line defines what kind of data this line contains.

-

The following tag characters are defined:

- +

The following tag characters are defined:

+
@@ -1034,15 +1086,15 @@ Calendar: date;echo;cal
C <channel id> <channel name>c
-

Lowercase characters mark the end of a sequence that was started +

Lowercase characters mark the end of a sequence that was started by the corresponding uppercase character. The outer frame consists of a sequence of one or more C...c (Channel) entries. Inside these any number of E...e (Event) entries are allowed. All other tags are optional (although every event should at least have a T entry).

-

There may be several X tags, depending on the number of +

There may be several X tags, depending on the number of tracks (video, audio etc.) the event provides.

- +
+ = AC3 audio, 5 = H.264 video, 6 = HEAAC audio, 0x09=H.265 video, 0x19 = + AC4 audio) @@ -1128,48 +1181,46 @@ Calendar: date;echo;cal epg.data file.
<channel id> is the "channel ID", made up from the parameters defined in @@ -1102,7 +1154,8 @@ Calendar: date;echo;cal
<stream> is the stream content (1 = MPEG2 video, 2 = MP2 audio, 3 = subtitles, 4 - = AC3 audio, 5 = H.264 video, 6 = HEAAC audio)
<type>
-

This file will be read at program startup in order to restore the +

This file will be read at program startup in order to restore the results of previous EPG scans.

-

Note that the event id that comes from the DVB data stream +

Note that the event id that comes from the DVB data stream is actually just 16 bit wide. The internal representation in VDR allows for 32 bit to be used, so that external tools can generate EPG data that is guaranteed not to collide with the ids of existing data.

-

The auxiliary data can be used for plugin specific purposes +

The auxiliary data can be used for plugin specific purposes and has no meaning whatsoever to VDR itself. It will not be written into the info file of a recording that is made for such an event.

-
-

-

The file cam.data contains information about which CAM in +

+

CAM DATA

+

The file cam.data contains information about which CAM in the system can decrypt a particular channel. Each line in this file contains a channel id, followed by one or more (blank separated) numbers, indicating the CAMs that have successfully decrypted this channel earlier.

-

When tuning to an encrypted channel, this information is used to +

When tuning to an encrypted channel, this information is used to select the proper CAM for decrypting this channel. This channel/CAM relationship is not hardcoded, though. If a given channel can't be decrypted with a CAM listed in this file, other CAMs will be tried just as well. The main purpose of this file is to speed up channel switching in systems with more than one CAM.

-

This file will be read at program startup and saved when the +

This file will be read at program startup and saved when the program ends. If the file is read-only, it will not be overwritten.

-
-

-

If your CAM keeps popping up annoying messages or you want to make +

+

CAM AUTO RESPONSE

+

If your CAM keeps popping up annoying messages or you want to make sure VDR can record programmes with parental rating without having to enter the PIN (in case you can't turn that off in your CAM), you can set up auto responses in the file camresponses.conf.

-

Each line in this file specifies one rule to apply to texts +

Each line in this file specifies one rule to apply to texts received from the CAM. If the CAM's menu text matches the text in one of these rules, the given action is taken and sent to the CAM as an automatic response, without any menu appearing on the screen. The first match wins.

-

The format of these rules is:

-

nr text action

-

where

- +

The format of these rules is:

+

nr text action

+

where

+
@@ -1184,8 +1235,8 @@ Calendar: date;echo;cal
nr is the number of the CAM this action applies to (0 = all CAMs)is the action to take if the given text is encountered
-

Possible actions are:

- +

Possible actions are:

+
@@ -1206,20 +1257,19 @@ Calendar: date;echo;cal (provided this is an input field).
DISCARD simply discard the menu (equivalent to pressing 'Back' on the RC)
-

Note that the text given in a rule must match exactly, including +

Note that the text given in a rule must match exactly, including any leading or trailing blanks. If in doubt, you can get the exact text from the log file. Action keywords are case insensitive.

-

Everything following (and including) a '#' character is considered +

Everything following (and including) a '#' character is considered to be comment.

-
-

-

If started without any options, vdr tries to read any files in the +

+

COMMANDLINE OPTIONS

+

If started without any options, vdr tries to read any files in the directory /etc/vdr/conf.d with names that do not begin with a '.' and that end with '.conf'. These files are read in alphabetical order. The format of these files is

-

+

# comment
 [name]
 -a
@@ -1227,7 +1277,7 @@ Calendar: date;echo;cal
 --long
 --longarg=123
-

Any lines that begin with '#' as the first non-whitespace +

Any lines that begin with '#' as the first non-whitespace character are considered comments and are ignored. A command line option file consists of one or more sections, indicated by '[name]', where 'name' is either the fixed word 'vdr' (if this section contains options for the @@ -1239,33 +1289,29 @@ Calendar: date;echo;cal option).

-
-

-

vdr(1)

+
+

SEE ALSO

+

vdr(1)

-
-

-

Written by Klaus Schmidinger.

+
+

AUTHOR

+

Written by Klaus Schmidinger.

-
-

-

Report bugs to <vdr-bugs@tvdr.de>.

+
+

REPORTING BUGS

+

Report bugs to <vdr-bugs@tvdr.de>.

-
-

-

Copyright © 2018 Klaus Schmidinger.

-

This is free software; see the source for copying conditions. +

+

COPYRIGHT

+

Copyright © 2021 Klaus Schmidinger.

+

This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

- +
- - + +
15 Apr 20182.427 Dec 20212.6
- - diff --git a/convert_vdr_docs.sh b/convert_vdr_docs.sh deleted file mode 100644 index e9b82ff..0000000 --- a/convert_vdr_docs.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/usr/bin/bash - -MANDOC=mandoc - -VDR_REPO_PREFIX="http://git.tvdr.de/?p=vdr.git;a=blob_plain;f=" - -mkdir tmp -wget "${VDR_REPO_PREFIX}vdr.1" -O "tmp/vdr.1" - - diff --git a/svdrpsend-command-reference.md b/svdrpsend-command-reference.md new file mode 100644 index 0000000..ff7692a --- /dev/null +++ b/svdrpsend-command-reference.md @@ -0,0 +1,58 @@ + + + + + + +
svdrpsend(1)Video Disk Recordersvdrpsend(1)
+
+
+

NAME

+

svdrpsend - sends commands to VDR

+
+
+

SYNOPSIS

+

svdrpsend [options] command

+
+
+

DESCRIPTION

+

This program sends commands to VDR (the Video Disk Recorder) and + displays the result. A list of available commands can be shown by sending + the HELP command.

+
+
+

OPTIONS

+
+
-d hostname
+
Accesses the VDR at the specified hostname (default is + localhost).
+
-p port
+
Uses the SVDRP port number port (default is 6419).
+
+
+
+

EXAMPLES

+

To request the available commands from the VDR running on the + local host:

+

svdrpsend HELP

+
+
+

AUTHORS

+

Written by Tobias Grimm <tg@e-tobi.net>

+

Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU General Public License, Version 2 any + later version published by the Free Software Foundation.

+

On Debian systems, the complete text of the GNU General Public + License can be found in /usr/share/common-licenses/GPL.

+
+
+

SEE ALSO

+

vdr(1), vdr(5)

+
+
+ + + + + +
27 Dec 20212.6