README.md

@@ -1,75 +1,12 @@
 # yavdr-ansible
 ansible playbooks for yaVDR
 
-## What can yavdr-ansible do for me?
-[Ansible](https://docs.ansible.com/ansible/latest/index.html) is an automation tool which can be used to configure systems and deploy software.
-yavdr-ansible uses Ansible to set up a yaVDR System on top of an Ubuntu 18.04 Server installation (see below for details) and allows the user to fully customize the installation - have a look at the Ansible documentation if you want to learn how it works.
-
-Please note that this is still work in progress and several features of yaVDR 0.6 haven't been implemented (yet).
-
-## System Requirements and Compatiblity Notes
-- RTC must be set to UTC in order for vdr-addon-acpiwakeup to work properly
-- 32 Bit Installations are untested, but should work
-- You need an IGP/GPU with support for VDPAU or VAAPI if you want to use software output plugins for VDR like softhddevice or vaapidevice
-- xineliboutput/vdr-sxfe works with software rendering, too
-- Can be used in a VirtualBox VM (VirtualBox 5.22 works better than Version 6.0.0)
-
 ## Usage:
 
-Set up a Ubuntu Server 18.04.x Installation and install `openssh-server`.
-
-NOTE: it is important to use the [alternative server installer](https://www.ubuntu.com/download/alternative-downloads#alternate-ubuntu-server-installer) or the [mini.iso](https://help.ubuntu.com/community/Installation/MinimalCD), otherwise the boot splash and Xorg won't work properly.
-
-### Download yavdr-ansible
-NOTE: It is recommended to use a SSH connection to run the playbook, especially if a nvidia card is used (in order to change from the nouveau to the nvidia driver the local console output needs to be disabled temporarily).
-
-Run the following commands to download the current version of yavdr-ansible:
+On a Ubuntu Server 16.04.x Installation run the following commands:
 ```
 sudo apt-get install git
 git clone https://github.com/yavdr/yavdr-ansible
 cd yavdr-ansible
-git checkout bionic
+sudo ./install-yavdr.sh
 ```
-
-### Customizing the Playbooks and Variables
-You can choose the roles run by the playbooks `yavdr07.yml` or ` yavdr07-headless.yml`.
-
-If you want to customize the variables in [group_vars/all](group_vars/all), copy the file to `host_vars/localhost` before changing it. This way you can change the PPAs used and choose which extra vdr plugins and packages should be installed by default.
-
-### Run the Playbook
-If you want a system with Xorg output run:
-```
-sudo -H ./install-yavdr.sh
-```
-NOTE: on systems with a nvidia card unloading the noveau driver after installing the proprietary nvidia driver can fail (in this case ansible throws an error). If this happens please reboot your system to allow the nvidia driver to be loaded and run the install script again.
-
-If you want a headless vdr server run:
-```
-sudo -H ./install-yavdr-headless.sh
-```
-
-## First Steps after the installation:
-
-### Wait for local dvb adapters
-The yaVDR VDR Package provides a systemd service `wait-for-dvb@.service` which allows to delay the start of vdr until all given locally connected dvb adapters have been initalized - e.g. to wait for `/dev/dvb/adapter0 .. /dev/dvb/adapter3`you can enable the required instances of this service like this:
-```shell
-systemctl enable wait-for-dvb@{0..3}.service
-```
-Please remember to adapt the enabled service instances if you change your configuration.
-
-This should work foll all DVB adaptors for which udev events are generated. Note that devices with userspace drivers (e.g. by Sundtek) won't emit such events.
-
-### Add a /var/lib/vdr/channels.conf
-
-You can use the wirbelscan-Plugin, w_scan, t2scan (especially useful for DVB-T2) or ready-to-use channellists from http://channelpedia.yavdr.com/gen/
-
-Important: vdr.service must be stopped if you want to edit VDR configuration files: `sudo stop vdr.service`
-
-### Rescan displays
-If you change the connected displays you may need to update the display configuration. This can be achived by running the `yavdr-xorg` role:
-```shell
-sudo -H ansible-playbook yavdr07.yml -b -i 'localhost_inventory' --connection=local --tags="yavdr-xorg"
-```
-
-### running single roles without a custom playbook
-You can choose to (re-)run single roles included in a playbook by including their name in the `--tags` argument (see example above for rescanning displays with `yavdr-xorg`).

ansible.cfg

@@ -1,5 +0,0 @@
-[defaults]
-callback_plugins = plugins/callbacks
-callback_whitelist = auto_tags
-ansible_managed = *** ANSIBLE MANAGED FILE ***
-  template: {file}

displays.yml

@@ -1,8 +1,8 @@
 ---
 # file: displays.yml
-# this playbook runs the yavdr-xorg role
+# this playbook runs the yavdr-xorg playbook
 
-- name: rescan displays
+- name: set up yaVDR
   hosts: all
   become: true
   roles:

filter_plugins/translate_yavdr.py

@@ -1,35 +0,0 @@
-# Copyright (c) 2017 Ansible Project
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-
-from __future__ import (absolute_import, division, print_function)
-__metaclass__ = type
-
-
-ANSIBLE_METADATA = {
-    'metadata_version': '1.1',
-    'status': ['preview'],
-    'supported_by': 'yavdr'
-}
-
-import gettext
-from ansible.errors import AnsibleFilterError
-from ansible.utils import helpers
-from ansible.module_utils._text import to_text
-
-
-def translate_yavdr(text):
-    gettext.textdomain('yavdr')
-    try:
-        return to_text(gettext.gettext(text))
-    except:
-        return to_text(text)
-
-# ---- Ansible filters ----
-class FilterModule(object):
-    ''' URI filter '''
-
-    def filters(self):
-        return {
-            'translate': translate_yavdr
-        }

group_vars/all

@@ -1,67 +1,40 @@
 ---
 # file: group_vars/all
 
-branch: experimental
+# this is the standard text to put in templates
+ansible_managed_file: "*** YAVDR: ANSIBLE MANAGED FILE ***"
+branch: unstable
 ppa_owner: 'ppa:yavdr'
 # add the following PPAs
 repositories:
-  - '{{ ppa_owner }}/{{branch}}-main'
+  - '{{ ppa_owner }}/main'
+  - '{{ ppa_owner }}/unstable-main'
   - '{{ ppa_owner }}/{{branch}}-vdr'
+  - '{{ ppa_owner }}/{{branch}}-yavdr'
   - '{{ ppa_owner }}/{{branch}}-kodi'
-  - 'ppa:frodo-vdr/experimental-vdr-yavdr'
-  #- '{{ ppa_owner }}/{{branch}}-yavdr'
 # properties of the user vdr and vdr-related options
-# NOTE: user name, uid and confdir must match the values set by the vdr package
 vdr:
   user: vdr
   group: vdr
   uid: 666
   gid: 666
   home: /var/lib/vdr
-  etc_confdir: /etc/vdr
   confdir: /var/lib/vdr
   recdir: /srv/vdr/video
   hide_first_recording_level: false
   safe_dirnames: true  # escape characters (useful for windows clients and FAT/NTFS file systems)
   override_vdr_charset: false
 
-# copy channels.conf from a local file
-# vdr_channels_conf: /path/to/channels.conf
-
-# download channels.conf from a given url (supports HTTP(S) and FTP)
-# vdr_channels_conf_url: http://example.com/vdr/channels.conf
-
 # add the vdr plugins you want to install
 vdr_plugins:
   - vdr-plugin-devstatus
   - vdr-plugin-markad
+  - vdr-plugin-restfulapi
   - vdr-plugin-softhddevice-vpp
-  - vdr-plugin-dvbapi
-  - vdr-plugin-satip
-
-# IP (range) filter for vdr and plugins (this must be an array):
-vdr_allowed_hosts:
-  - 192.168.0.0/16
-#
-# hosts and subnets for svdrphosts.conf (overrides vdr_allowed_hosts):
-vdr_svdrphosts:
-  - 192.168.0.0/16
-#
-# hosts and subnets for allowed_hosts.conf of xineliboutput (overrides vdr_allowed_hosts):
-xineliboutput_allowed_hosts:
-  - 192.168.0.0/16
-#
-# hosts and subnets for allowed_hosts.conf of vnsiserver (overrides vdr_allowed_hosts):
-vnsiserver_allowed_hosts:
-  - 192.168.0.0/16
-#
-# hosts and subnets for streamdevhosts.conf (overrides vdr_allowed_hosts):
-streamdev_server_allowed_hosts:
-  - 192.168.0.0/16
 # dictionary of directories for (shared) files. Automatically exported via NFS and Samba if those roles are enabled
 media_dirs:
   audio: /srv/audio
-  video: /srv/video
+  video: /srv/audio
   pictures: /srv/picture
   files: /srv/files
   backups: /srv/backups
@@ -79,24 +52,10 @@ extra_packages:
   - tree
   - vim
   - w-scan
-  - t2scan
-  - plymouth-theme-yavdr-logo
-  - vdr-addon-lifeguard-ng
-  - vdrpbd
-  - wajig
 frontend: vdr
-
-# vdr shutdown command - SHUTDOWNCMD variable in /etc/default/vdr
-# for standby use "/bin/systemctl suspend"
-vdr_shutdown_command: poweroff
-
 #system:
 #  shutdown: poweroff
 wakeup_method: acpiwakeup
 grub:
   timeout: 0
-  boot_options: quiet splash
-# Serial device to configure for a homebrew receiver.
-# Choose either ttyS0 (COM1) or ttyS1 (COM2)
-# Also ensure that the role serial-ir is enabled in yavdr07.yml 
-serial_ir_device: ttyS0
+  boot_options: quiet nosplash

handlers/main.yml

@@ -20,13 +20,6 @@
     #masked: no
   register: nfs_reload
 
-- name: Restart sundtek.service
-  systemd:
-    name: sundtek.service
-    state: restarted
-    enabled: yes
-    masked: no
-
 - name: Restart VDR
   systemd:
     name: vdr.service
@@ -48,15 +41,6 @@
     enabled: yes
   register: vdr_start
 
-- name: Start yavdr-xorg
-  systemd:
-    daemon_reload: yes
-    name: 'yavdr-xorg'
-    enabled: yes
-    state: started
-  register: yavdr_xorg_start
-
-
 - name: Stop xlogin
   systemd:
     name: xlogin@vdr.service
@@ -64,20 +48,8 @@
     enabled: yes
   register: xlogin_stop
 
-- name: Start xlogin
-  systemd:
-    daemon_reload: yes
-    name: 'xlogin@{{ vdr.user }}'
-    enabled: yes
-    state: started
-  register: xlogin_start
-
 - name: Stop x
   systemd:
     name: x@vt7.service
     state: stopped
   register: x_stop
-
-- name: reboot required
-  debug:
-    msg: PLEASE REBOOT YOUR SYSTEM.

install-yavdr-headless.sh

@@ -1,17 +0,0 @@
-#!/bin/bash
-set -e
-if (( $EUID != 0 )); then
-    echo "This script must be run using sudo -H or as root"
-    exit
-fi
-
-# update packages
-apt update
-apt -y install software-properties-common
-add-apt-repository -y ppa:ansible/ansible-2.7
-
-# install required packages
-apt-get -y install --no-install-recommends ansible python-jmespath
-
-# TODO: run ansible on local host
-ansible-playbook yavdr07-headless.yml -b -i 'localhost_inventory' --connection=local --tags="all"

install-yavdr.sh

@@ -1,17 +1,16 @@
 #!/bin/bash
-set -e
 if (( $EUID != 0 )); then
-    echo "This script must be run using sudo -H or as root"
+    echo "This script must be run using sudo or as root"
     exit
 fi
 
+apt-get -y install software-properties-common
+# Add repository for ansible
+add-apt-repository -y ppa:ansible/ansible
 # update packages
-apt update
-apt -y install software-properties-common
-add-apt-repository -y ppa:ansible/ansible-2.7
-
+apt-get update
 # install required packages
-apt-get -y install --no-install-recommends ansible python-jmespath
+apt-get -y install ansible
 
 # TODO: run ansible on local host
-ansible-playbook yavdr07.yml -b -i 'localhost_inventory' --connection=local --tags="all"
+ansible-playbook yavdr07.yml -b -i 'localhost_inventory' --connection=local --tags=install

library/dpkg_reconfigure

@@ -1,174 +0,0 @@
-#!/usr/bin/python
-# -*- coding: utf-8 -*-
-
-"""
-Ansible module for reconfiguring debian packages.
-(c) 2013, Sebastien Bocahu <sebastien.bocahu@nuxit.com>
-
-This file is part of Ansible
-
-Ansible is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-Ansible is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
-"""
-
-DOCUMENTATION = '''
----
-module: dpkg_reconfigure
-short_description: Reconfigure a Debian package.
-description:
-     - Reconfigure a Debian package using dpkg-reconfigure.
-version_added: "1.2"
-notes:
-    - A number of questions has to be answered (depending on the package).
-      Use 'DEBIAN_FRONTED=editor dpkg-reconfigure $pkg' for finding them.
-options:
-  pkg:
-    description:
-      - Package to configure.
-    required: true
-    default: null
-    aliases: []
-  answers:
-    description:
-      - Debconf configuration answer(s)/question(s).
-    required: true
-    default: null
-    aliases: []
-author: Sebastien Bocahu
-'''
-
-EXAMPLES = '''
-# Set default locale to fr_FR.UTF-8, and generate en_US.UTF-8 as well:
-dpkg_reconfigure:
-   pkg: locales
-   answers:
-       locales/default_environment_locale: fr_FR.UTF-8
-       locales/locales_to_be_generated: en_US.UTF-8 UTF-8, fr_FR.UTF-8 UTF-8
-
-# Reconfigure roundcube, using configuration answers stored in a file:
-dpkg_reconfigure: pkg=roundcube answers='$FILE(/path/dpkg-reconfigure/roundcube)'"
-'''
-
-import sys
-import os
-import pwd
-import os.path
-import re
-import tempfile
-
-def get_selections(module, pkg):
-    cmd = [module.get_bin_path('debconf-show', True)]
-    cmd.append(' %s' % pkg)
-    rc, out, err = module.run_command(' '.join(cmd))
-
-    if rc == 0:
-        selections = {}
-        for answer in out.split('\n'):
-            item = re.search('^[* ] ([^:]+): (.*)$', answer)
-            if item:
-                value = item.group(2).strip()
-                if value == 'true':
-                    value = 'yes'
-                elif value == 'false':
-                    value = 'no'
-                selections[ item.group(1).strip() ] = value
-        return selections
-    else:
-        module.fail_json(msg=err)
-
-
-def dpkg_reconfigure(module, pkg, wanted_config):
-    editor_script = [ '#!/bin/sh', 'sed -i "$1" -f - <<EOF' ]
-    for question in wanted_config:
-        e_question = re.sub(r'([\\/&])', r'\\\1', question)
-        e_answer = re.sub(r'([\\/&])', r'\\\1', wanted_config[question])
-        editor_script.append('s/^\\(%s\\)\\s*=.*/\\1="%s"/' % (e_question, e_answer))
-    editor_script.append('EOF')
-
-    outfd, outsock_path = tempfile.mkstemp()
-    tmp = os.fdopen(outfd,'w')
-    tmp.write('\n'.join(editor_script))
-    tmp.close()
-    os.chmod(outsock_path, stat.S_IEXEC)
-
-    cmd = [ 'EDITOR=%s DEBIAN_FRONTEND=editor' % outsock_path ]
-    cmd.append(module.get_bin_path('dpkg-reconfigure', True))
-    cmd.append(pkg)
-    rc, out, err = module.run_command(' '.join(cmd), use_unsafe_shell=True)
-    os.unlink(outsock_path)
-
-    if rc == 0:
-        return True, err
-    else:
-        return False, err
-
-
-def enforce_state(module, params):
-
-    pkg   = params["pkg"]
-    answers  = params["answers"]
-
-    wanted_config = {}
-
-    if type(answers) is dict:
-        wanted_config = answers
-    else:
-        for answer in answers.split('\n'):
-            item = re.findall(r"[^\s]+", answer)
-            if len(item) > 1:
-                 wanted_config[ item[0].strip() ] = ' '.join(item[1:])
-            elif len(item) == 1:
-                 wanted_config[ item[0].strip() ] = ''
-
-    for key in wanted_config:
-        value = wanted_config[key]
-        if isinstance(value, bool):
-            if value:
-                wanted_config[key] = 'yes'
-            else:
-                wanted_config[key] = 'no'
-
-    current_config = get_selections(module, params["pkg"])
-
-    already_configured = 1
-    for answer in wanted_config:
-        if not answer in current_config or current_config[answer] != wanted_config[answer]:
-            already_configured = 0
-
-    if already_configured:
-        module.exit_json(changed=False, msg="Already configured")
-    else:
-        rc, msg = dpkg_reconfigure(module, pkg, wanted_config)
-        if not rc:
-            module.fail_json(msg=msg)
-
-    params['changed'] = True
-    params['msg'] = msg
-    return params
-
-
-def main():
-
-    module = AnsibleModule(
-        argument_spec = dict(
-           pkg   = dict(required=True),
-           answers  = dict(required=True),
-        )
-    )
-
-    results = enforce_state(module, module.params)
-    module.exit_json(**results)
-
-# this is magic, see lib/ansible/module_common.py
-#<<INCLUDE_ANSIBLE_MODULE_COMMON>>
-main()

library/hardware_facts.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/env/python
 # This Module collects the vendor- and device ids for USB- and PCI(e)-devices and currently loaded kernel modules.
 DOCUMENTATION = '''
   ---
@@ -52,11 +52,11 @@ EXAMPLES = '''
     acpi_power_modes: True
 - debug:
     var: usb
-- debug:
+- debug
     var: pci
-- debug:
+- debug
     var: modules
-- debug:
+- debug
     var: gpus
 '''
 
@@ -66,7 +66,6 @@ import os
 import sys
 import usb.core
 from collections import namedtuple
-from itertools import chain
 
 import kmodpy
 from ansible.module_utils.basic import *
@@ -82,7 +81,7 @@ vendor_dict = {
     }
 
 def get_pci_devices():
-    for device in chain(glob.glob('/sys/devices/pci*/*:*:*/'), glob.glob('/sys/devices/pci*/*:*:*/*:*:*/')):
+    for device in glob.glob('/sys/devices/pci*/*:*:*/*:*:*/'):
         try:
             with open(os.path.join(device, 'device')) as d:
                 product_id = int(d.read().strip(), 16)
@@ -135,10 +134,6 @@ def main():
     pci_devices = []
     modules = []
     gpus = []
-    nvidia_detected = False
-    intel_detected = False
-    amd_detected = False
-    virtualbox_detected = False
     acpi_power_modes = []
 
     if collect_usb:
@@ -153,18 +148,12 @@ def main():
 
     if collect_gpus:
         gpus = format_gpu_device_list(get_pci_devices())
-        nvidia_detected = any((True for gpu in gpus if gpu['VendorName'] == 'nvidia'))
-        intel_detected = any((True for gpu in gpus if gpu['VendorName'] == 'intel'))
-        amd_detected = any((True for gpu in gpus if gpu['VendorName'] == 'amd'))
-        virtualbox_detected = any((True for gpu in gpus if gpu['VendorName'] == 'virtualbox'))
 
     if collect_acpi_power_modes:
         acpi_power_modes = list_acpi_power_modes()
 
     data = {'usb': usb_devices, 'pci': pci_devices, 'modules': modules, 'gpus': gpus,
-            'acpi_power_modes': acpi_power_modes, 'nvidia_detected': nvidia_detected,
-            'intel_detected': intel_detected, 'amd_detected': amd_detected,
-            'virtualbox_detected': virtualbox_detected}
+            'acpi_power_modes': acpi_power_modes}
     module.exit_json(changed=False, ansible_facts=data, msg=data)
 
 

library/pci_facts.py

@@ -1,69 +0,0 @@
-#!/usr/bin/env python
-# This module parses the output of lspci for detailed information about available (sub) devices.
-DOCUMENTATION = '''
-  ---
-  module: pci_facts
-  short_description: parses lspci output for detailed (sub) devices data
-  description:
-      - This module parses the output of lspci for detailed information about available (sub) devices.
-      - returns a list with a dict for each device
-
-notes:
-    - requires lspci (package pciutils)
-
-'''
-
-EXAMPLES = '''
-- name: get detailled pci device infos
-  pci_facts:
-
-- debug:
-    var: pci_devices
-'''
-
-
-import argparse
-import shlex
-import subprocess
-from collections import namedtuple
-
-from ansible.module_utils.basic import *
-
-def convert2hex(arg):
-    arg = arg.strip('"')
-    if arg:
-        return int(arg, 16)
-    else:
-        return None
-
-def parse_lspci_data():
-    parser = argparse.ArgumentParser()
-    parser.add_argument('-r', '--revision', help='revision', type=convert2hex)
-    parser.add_argument('-p', '--progif', help='proginf', type=convert2hex)
-    parser.add_argument('slot')
-    parser.add_argument('device_class', type=convert2hex)
-    parser.add_argument('vendor_id', type=convert2hex)
-    parser.add_argument('device_id', type=convert2hex)
-    parser.add_argument('sub_vendor_id', type=convert2hex)
-    parser.add_argument('sub_device_id', type=convert2hex)
-    parser.add_argument('other', nargs='*', default=[])
-
-    devices = []
-    for line in subprocess.check_output(['lspci', '-nm'], universal_newlines=True).splitlines():
-        args = parser.parse_args(args=shlex.split(line))
-        devices.append(vars(args))
-    return devices
-
-
-def main():
-    arg_specs = {}
-    module = AnsibleModule(argument_spec=arg_specs, supports_check_mode=True,)
-    try:
-        pci_devices = parse_lspci_data()
-    except:
-        module.fail_json(msg="Something fatal happened")
-    data = {'pci_devices': pci_devices}
-    module.exit_json(changed=False, ansible_facts=data, msg=data)
-
-if __name__ == '__main__':
-    main()

library/rmmod.py

@@ -1,83 +0,0 @@
-#!/usr/bin/python
-# -*- coding: utf-8 -*-
-
-# Copyright: (c) 2019, Alexander Grothe <seahawk1986@gmx.de>
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-from __future__ import absolute_import, division, print_function
-__metaclass__ = type
-import traceback
-
-from ansible.module_utils.basic import AnsibleModule
-from ansible.module_utils._text import to_native
-
-
-ANSIBLE_METADATA = {'metadata_version': '1.1',
-                    'status': ['preview'],
-                    'supported_by': 'community'}
-
-DOCUMENTATION = '''
----
-module: rmmod
-short_description: unload kernel modules with rmmod
-version_added: 2.7
-author:
-    - Alexander Grothe
-description:
-    - Unload kernel modules with rmmod.
-    - Builtin kernel modules can't be removed (will do nothing in this case).
-options:
-    name:
-        required: true
-        description:
-            - Name of kernel module to remove.
-'''
-
-EXAMPLES = '''
-- name: Unload nouveau module
-  rmmod:
-    name: nouveau
-'''
-
-
-def main():
-    module = AnsibleModule(
-        argument_spec=dict(
-            name=dict(type='str', required=True),
-        ),
-        supports_check_mode=True,
-    )
-
-    name = module.params['name']
-
-    # FIXME: Adding all parameters as result values is useless
-    result = dict(
-        changed=False,
-        name=name,
-    )
-
-    # Check if module is loaded
-    try:
-        is_loaded = False
-        with open('/proc/modules') as modules:
-            module_name = name.replace('-', '_') + ' '
-            for line in modules:
-                if line.startswith(module_name):
-                    is_loaded = True
-                    break
-    except IOError as e:
-        module.fail_json(msg=to_native(e), exception=traceback.format_exc(), **result)
-
-    # remove module if it is loaded
-    if is_loaded:
-        if not module.check_mode:
-            rc, out, err = module.run_command([module.get_bin_path('rmmod', True), name])
-            if rc != 0:
-                module.fail_json(msg=err, rc=rc, stdout=out, stderr=err, **result)
-        result['changed'] = True
-
-    module.exit_json(**result)
-
-
-if __name__ == '__main__':
-    main()

library/xrandr_facts.py

@@ -3,40 +3,29 @@ from __future__ import print_function
 import ast
 import binascii
 import csv
-import os
 import re
 import subprocess
 from collections import namedtuple
-from glob import glob
 
-from ansible.module_utils.basic import AnsibleModule
+from ansible.module_utils.basic import *
 
 DOCUMENTATION = '''
 ---
 module: xrandr_facts
 short_description: "gather facts about connected monitors and available modelines"
 description:
-     - This module needs a running x-server on a given display in
-       order to successfully call xrandr. Returns the dictionary
-       "xrandr", wich contains all screens with output states,
-       connected displays, EDID info and their modes and a
-       recommendation for the best fitting tv mode, the dictionary
-       "xorg" with a recommendation for the primary and secondary
-       output and a "drm" dictionary whose "primary" key associates
-       the primary device name of the drm subsystem with the one from
-       the xrandr output by comparing the edid data and a list of
-       "ignored_devices". Note that the proprietary nvidia driver
-       doesn't support KMS/drm, so in this case the dictionary is
-       always empty.
+     - This module needs a running x-server on a given display in order to successfully call xrandr.
+       Returns the dictionary "xrandr", wich contains all screens with output states, connected displays,
+       EDID info and their modes and a recommendation for the best fitting tv mode.
 options:
     display:
         required: False
         default: ":0"
         description:
           - the DISPLAY variable to use when calling xrandr
-    preferred_outputs:
+    preferred_outpus:
         required: False
-        default: ["HDMI", "DP", "eDP", "DVI", "VGA", "TV", "Virtual"]
+        default: ["HDMI", "DP", "DVI", "VGA", "TV": 0]
         description:
           - ranking of the preferred display connectors
     preferred_refreshrates:
@@ -54,7 +43,6 @@ options:
         default: True
         description:
            - write edid data to /etc/X11/edid.{connector}.bin
-           - the dictionary "drm" can only be filled with data if write_edids is enabled
 '''
 EXAMPLES = '''
 - name: "collect facts for connected displays"
@@ -66,15 +54,12 @@ EXAMPLES = '''
 
 - debug:
     var: xorg
-
-- debug:
-    var: drm
 '''
 
 ARG_SPECS = {
     'display': dict(default=":0", type='str', required=False),
     'preferred_outputs': dict(
-        default=["HDMI", "DP", "eDP", "DVI", "VGA", "TV", "Virtual"], type='list', required=False),
+        default=["HDMI", "DP", "DVI", "VGA", "TV"], type='list', required=False),
     'preferred_refreshrates': dict(
         default=[50, 60, 75, 30, 25], type='list', required=False),
     'preferred_resolutions': dict(
@@ -82,23 +67,21 @@ ARG_SPECS = {
             "7680x4320", "3840x2160", "1920x1080", "1280x720", "720x576"],
         type='list', required=False),
     'write_edids': dict(default=True, type='bool', required=False),
-}
+    }
 
-SCREEN_REGEX = re.compile(r"^(?P<screen>Screen\s\d+:)(?:.*)")
+SCREEN_REGEX = re.compile("^(?P<screen>Screen\s\d+:)(?:.*)")
 CONNECTOR_REGEX = re.compile(
-    r"^(?P<connector>.*-?\d+)\s(?P<connection_state>connected|disconnected)\s(?P<primary>primary)?")
-MODE_REGEX = re.compile(r"^\s+(?P<resolution>\d{3,}x\d{3,}).*")
+    "^(?P<connector>.*-\d+)\s(?P<connection_state>connected|disconnected)\s(?P<primary>primary)?")
+MODE_REGEX = re.compile("^\s+(?P<resolution>\d{3,}x\d{3,}).*")
 
 Mode = namedtuple('Mode', ['connection', 'resolution', 'refreshrate'])
 
-
 def check_for_screen(line):
     """check line for screen information"""
     match = re.match(SCREEN_REGEX, line)
     if match:
         return match.groupdict()['screen']
 
-
 def check_for_connection(line):
     """check line for connection name and state"""
     match = re.match(CONNECTOR_REGEX, line)
@@ -110,12 +93,10 @@ def check_for_connection(line):
         is_connected = True if match['connection_state'] == 'connected' else False
     return connector, is_connected
 
-
 def get_indentation(line):
     """return the number of leading whitespace characters"""
     return len(line) - len(line.lstrip())
 
-
 def sort_mode(mode):
     """rate modes by several criteria"""
     connection_score = 0
@@ -137,7 +118,6 @@ def sort_mode(mode):
         connection_score = len(preferred_outputs) - preferred_outputs.index(connection)
     return (rrate_score, resolution_score, x_resolution, y_resolution, connection_score)
 
-
 def parse_xrandr_verbose(iterator):
     """parse the output of xrandr --verbose using an iterator delivering single lines"""
     xorg = {}
@@ -166,7 +146,7 @@ def parse_xrandr_verbose(iterator):
                 else:
                     break
             xorg[screen][connector]['EDID'] = edid_str
-        elif is_connected and "MHz" in line and "Interlace" not in line:
+        elif is_connected and "MHz" in line and not "Interlace" in line:
             match = re.match(MODE_REGEX, line)
             if match:
                 match = match.groupdict()
@@ -191,64 +171,32 @@ def parse_xrandr_verbose(iterator):
                         break
     return xorg
 
-
 def parse_edid_data(edid):
     vendor = "Unknown"
     model = "Unknown"
-    modelines = []
-    try:
-        data = subprocess.check_output("parse-edid < {}".format(edid),
-                                       shell=True, universal_newlines=True)
-    except subprocess.CalledProcessError:
-        pass
-    else:
+    data = subprocess.check_output("parse-edid < {}".format(edid), shell=True, universal_newlines=True)
     for line in data.splitlines():
-            line = line.strip()
         if "VendorName" in line:
-                vendor = line.split('"')[1]
+            vendor = line.strip().split('"')[1]
         if "ModelName" in line:
-                model = line.split('"')[1]
-            if "Modeline" in line:
-                print(line)
-                _, _, line = line.split('"', 2)
-                if not line:
-                    print("no timing information")
-                    continue
-                try:
-                    FF, H1, H2, H3, H4, V1, V2, V3, V4, FLAGS = line.split(None, 9)
-                except ValueError:
-                    print("invalid timing information")
-                    continue
-                print(FF, H1, H2, H3, H4, V1, V2, V3, V4, FLAGS)
-                refresh = round(float(FF) * 1E6 / (float(H4) * float(V4)))
-                interlaced = "interlaced" in FLAGS
-                if interlaced:
-                    refresh /= 2
-                refresh = int(refresh)
-                modeline_name = '"{}x{}_{}{}"'.format(H1, V1, refresh, "i" if interlaced else '')
-                modelines.append(" ".join(("Modeline", modeline_name,
-                                          FF, H1, H2, H3, H4, V1, V2, V3, V4, FLAGS)))
-    return vendor, model, modelines
-
+            model =  line.strip().split('"')[1]
+    return vendor, model
 
 def collect_nvidia_data():
     BusID_RE = re.compile((
-        r'(?P<domain>[0-9a-fA-F]+)'
-        r':'
-        r'(?P<bus>[0-9a-fA-F]+)'
-        r':'
-        r'(?P<device>[0-9a-fA-F]+)'
-        r'\.'
-        r'(?P<function>[0-9a-fA-F]+)'
+        '(?P<domain>[0-9a-fA-F]+)'
+        ':'
+        '(?P<bus>[0-9a-fA-F]+)'
+        ':'
+        '(?P<device>[0-9a-fA-F]+)'
+        '\.'
+        '(?P<function>[0-9a-fA-F]+)'
      ))    
     try:
-        data = subprocess.check_output(["nvidia-smi", "--query-gpu=name,pci.bus_id",
-                                        "--format=csv", "-i0"], universal_newlines=True)
+        data = subprocess.check_output(["nvidia-smi", "--query-gpu=name,pci.bus_id", "--format=csv", "-i0"],
+                                universal_newlines=True)
     except subprocess.CalledProcessError:
         pass
-    except OSError:
-        # nvidia-smi is not installed
-        pass
     else:
         for row in csv.DictReader(data.splitlines(), delimiter=',', skipinitialspace=True):
             name = row['name']
@@ -262,77 +210,7 @@ def collect_nvidia_data():
     raise ValueError
 
 
-def find_drm_connectors(connections):
-    """
-    returns a dict with the following schema (secondary may be empty):
-    {
-        'primary': {
-            'edid': 'edid.HDMI-1.bin',
-            'drm_connector': 'HDMI-A-1',
-            'xrandr_connector': 'HDMI-1',
-        },
-        'secondary': {
-            'edid': 'edid.eDP-1.bin',
-            'drm_connector': 'eDP-1',
-            'xrandr_connector': 'eDP-1',
-        }
-        'ignored_outputs': ['HDMI-A-2', 'DP-1']
-    }
-    """
-    STATUS_GLOB = '/sys/class/drm/card0*/status'
-    CONNECTOR_RE = re.compile('card0-(?P<connector>[^/]+)/status')
-
-    def read_edid_bytes(edid_file):
-        edid_bytes = b''
-        try:
-            with open(edid_file, 'rb') as f:
-                edid_bytes = f.read()
-        except IOError:
-            pass
-        return edid_bytes
-
-    xrandr_edid_bytes = read_edid_bytes(connections.get('primary', {}).get('edid', ""))
-    secondary_xrandr_edid_bytes = read_edid_bytes(connections.get('secondary', {}).get('edid', ''))
-
-    drm = {'primary': {}, 'secondary': {}, 'ignored_outputs': []}
-    for status_p in glob(STATUS_GLOB):
-        match = re.search(CONNECTOR_RE, status_p)
-        if match:
-            drm_connector = match.group('connector')
-        else:
-            continue
-
-        try:
-            with open(status_p) as f:
-                connected = f.read().strip() == 'connected'
-        except IOError:
-            continue
-
-        if connected:
-            edid = read_edid_bytes(os.path.join(
-                os.path.dirname(status_p), 'edid'))
-            if edid:
-                if edid == xrandr_edid_bytes:
-                    drm['primary'] = {
-                        'edid': os.path.basename(connections['primary'].get('edid', "")),
-                        'drm_connector': drm_connector,
-                        'xrandr_connector': connections['primary'].get('connector',''),
-                    }
-                    continue
-                if secondary_xrandr_edid_bytes:
-                    drm['secondary'] = {
-                        'edid': os.path.basename(connections.get('secondary').get('edid', '')),
-                        'drm_connector': drm_connector,
-                        'xrandr_connector': connections['secondary'].get('connector',''),
-                    }
-                    continue
-        drm['ignored_outputs'].append(drm_connector)
-    return drm
-
-
 def output_data(data, write_edids=True):
-    result = {}
-    drm = {}
     if data:
         modes = []
         for _, screen_data in data.items():
@@ -344,13 +222,14 @@ def output_data(data, write_edids=True):
                     for refreshrate in refreshrates:
                         modes.append(Mode(connector, resolution, refreshrate))
         if modes:
+            result = {}
             try:
                 gpu_name, bus_id = collect_nvidia_data()
             except ValueError:
                 gpu_name = None
                 bus_id = None
 
-            def create_entry(my_dict, name, connector, resolution, refreshrate, vendor, model, modelines):
+            def create_entry(my_dict, name, connector, resolution, refreshrate, vendor, model):
                 my_dict[name] = {
                     'connector': connector,
                     'resolution': resolution,
@@ -359,40 +238,29 @@ def output_data(data, write_edids=True):
                     'mode': "{}_{}".format(resolution, refreshrate),
                     'vendor': vendor,
                     'model': model,
-                    'modelines': modelines,
                 }
                 if gpu_name and bus_id:
                     result[name]['gpu_name'] = gpu_name
                     result[name]['bus_id'] = bus_id
 
             connector_0, resolution_0, refreshrate_0 = max(modes, key=sort_mode)[:3]
-            connector_0_edid = '/etc/X11/edid.{}.bin'.format(connector_0)
-            vendor_0, model_0, modelines_0 = parse_edid_data(connector_0_edid)
-            create_entry(result, 'primary', connector_0, resolution_0,
-                         refreshrate_0, vendor_0, model_0, modelines_0)
+            vendor_0, model_0 = parse_edid_data('/etc/X11/edid.{}.bin'.format(connector_0))
+            create_entry(result, 'primary', connector_0, resolution_0, refreshrate_0, vendor_0, model_0)
 
             # check if additional monitors exist
             other_modes = [mode for mode in modes if mode[0] != connector_0]
             if other_modes:
                 connector_1, resolution_1, refreshrate_1 = max(other_modes, key=sort_mode)[:3]
-                connector_1_edid = '/etc/X11/edid.{}.bin'.format(connector_1)
-                vendor_1, model_1, modelines_1 = parse_edid_data(connector_1_edid)
-                create_entry(result, 'secondary', connector_1, resolution_1,
-                             refreshrate_1, vendor_1, model_1, modelines_1)
-
-            if write_edids:
-                drm = find_drm_connectors(result)
-
-
-    module.exit_json(changed=True if write_edids else False,
-                     ansible_facts={'xrandr': data, 'xorg': result, 'drm': drm})
+                vendor_1, model_1 = parse_edid_data('/etc/X11/edid.{}.bin'.format(connector_1))
+                create_entry(result, 'secondary', connector_1, resolution_1, refreshrate_1, vendor_1, model_1)
 
+    #print(json.dumps(data, sort_keys=True, indent=4))
+    module.exit_json(changed=True if write_edids else False, ansible_facts={'xrandr': data, 'xorg': result})
 
 if __name__ == '__main__':
     module = AnsibleModule(argument_spec=ARG_SPECS, supports_check_mode=False,)
     try:
-        d = subprocess.check_output(['xrandr', '-d', module.params['display'], '--verbose'],
-                                    universal_newlines=True).splitlines()
+        d = subprocess.check_output(['xrandr', '-d', module.params['display'], '--verbose'], universal_newlines=True).splitlines()
     except subprocess.CalledProcessError:
         xorg_data = {}
     else:

plugins/callbacks/auto_tags.py

@@ -1,48 +0,0 @@
-"""
-This module implements an Ansible plugin that is triggered at the start of a playbook.
-
-The plugin dynamically generates a tag for each role. Each tag has the same name as its role.
-The advantage of this is that it saves you some boilerplate, because you don't have to wrap
-all tasks of a role in an additional block and assign a tag to that.
-Additionally, it works automatically when you add new roles to your playbook.
-
-Usage is exactly the same as without this plugin:
-
-ansible-playbook --tags=some_tag provision.yml
-
-Here, the "some_tag" tag was generated dynamically (assuming there is a "some_tag" role).
-
-Installation:
-1. Place this file in `plugins/callbacks/auto_tags.py` (relative to your playbook root)
-2. Add the following two lines to your `ansible.cfg` file:
-
-callback_plugins = plugins/callbacks
-callback_whitelist = auto_tags
-"""
-from __future__ import print_function
-from ansible.plugins.callback import CallbackBase
-
-
-class CallbackModule(CallbackBase):
-    """
-    Ansible supports several types of plugins. We are using the *callback* type here, since
-    it seemed the best choice for our use case, because it allows you to hook into the start
-    of a playbook.
-    """
-    def v2_playbook_on_start(self, playbook):
-        """
-        Dynamically add a tag of the same name to each role.
-        Note: Plays, roles, task_blocks and tasks can have tags.
-        """
-        plays = playbook.get_plays()
-
-        # Note: Although identical roles are shared between plays we cannot deduplicate them,
-        # since Ansible treats them as different objects internally
-        roles = [role for play in plays for role in play.get_roles()]
-
-        # Note: Tags for roles are set dynamically in `_load_role_data` instead of in __init__
-        # I don't know why they do that.
-        for role in roles:
-            role_name = role._role_name
-            if role_name not in role.tags:
-                role.tags += [role_name]

roles/autoinstall-atric-usb/meta/main.yml

@@ -1,4 +0,0 @@
----
-dependencies:
-    - { role: collect-facts }
-    - { role: yavdr-remote }

roles/autoinstall-atric-usb/tasks/main.yml

@@ -1,35 +0,0 @@
----
-# file roles/autoinstall-atric-usb/tasks/main.yml
-
-- name: install and configure Atric IR-WakeupUSB
-  block:
-    - name: apt | install lirc-drv-irman
-      apt:
-        name: lirc-drv-irman
-        state: present
-      tags:
-        - packages
-
-    - name: write lirc configuration
-      template:
-        src: templates/lirc_options.conf.j2
-        dest: /etc/lirc/lirc_options.conf
-      tags:
-        - config
-        - systemd
-
-    - name: enable lircd, eventlircd, lircd2uinput
-      systemd:
-        name: '{{ item }}'
-        enabled: yes
-        state: started
-        masked: no
-        daemon_reload: yes
-      with_items:
-        - eventlircd.service
-        - lircd2uinput.service
-        - lircd.service
-      tags:
-        - systemd
-
-  when: '"04d8:f844" in usb'

roles/autoinstall-atric-usb/templates/lirc_options.conf.j2

@@ -1,21 +0,0 @@
-{{ ansible_managed | comment }}
-
-[lircd]
-nodaemon        = False
-driver          = irman
-device          = /dev/irman
-output          = /var/run/lirc/lircd0
-pidfile         = /var/run/lirc/lircd0.pid
-plugindir       = /usr/lib/x86_64-linux-gnu/lirc/plugins
-permission      = 666
-allow-simulate  = No
-repeat-max      = 600
-#loglevel       = 6
-#release        = true
-#release_suffix = _EVUP
-#logfile        = ...
-#driver-options = ...
-
-[lircmd]
-uinput          = False
-nodaemon        = False

roles/autoinstall-dvbhddevice/meta/main.yml

@@ -1,3 +0,0 @@
----
-dependencies:
-    - { role: collect-facts }

roles/autoinstall-dvbhddevice/tasks/main.yml

@@ -3,8 +3,6 @@
 
 - name: apt | install vdr-plugin-dvbhddevice if connected
   apt:
-    name:
-      - vdr-plugin-dvbhddevice
-      - yavdr-firmware
+    name: vdr-plugin-dvbhddevice
   when: '"13c2:300a" in pci or "13c2:300b" in pci'
   notify: [ 'Restart VDR' ]

roles/autoinstall-dvbsddevice/meta/main.yml

@@ -1,3 +0,0 @@
----
-dependencies:
-  - { role: collect-facts }

roles/autoinstall-dvbsddevice/tasks/main.yml

@@ -1,12 +1,8 @@
 ---
 # file roles/autoinstall-dvbsddevice/tasks/main.yml
 
-# TODO: install firmware
-
 - name: apt | install vdr-plugin-dvbsddevice if module is loaded
   apt:
-    name:
-      - vdr-plugin-dvbsddevice
-      - yavdr-firmware
+    name: vdr-plugin-dvbsddevice
   when: '"dvb_ttpci" in modules'
   notify: [ 'Restart VDR' ]

roles/autoinstall-dvbsky-firmware/meta/main.yml

@@ -1,3 +0,0 @@
----
-dependencies:
-  - { role: collect-facts }

roles/autoinstall-dvbsky-firmware/tasks/main.yml

@@ -3,11 +3,12 @@
 
 - name: determine needed firmware files by device ids
   block:
-    - name: add firmware files for DVBSky if a card has been detected
+    - name: add firmware for DVBSky S952 V3 to variable dvbsky_firmware_files if a card has been detected
       set_fact:
-        dvbsky_firmware_files: ['dvb-demod-m88ds3103.fw', 'dvb-demod-m88rs6000.fw', 'dvb-tuner-si2158-a20-01.fw', 'dvb-demod-si2168-a20-01.fw', 'dvb-demod-si2168-a30-01.fw', 'dvb-demod-si2168-b40-01.fw', 'dvb-fe-ds300x.fw', 'dvb-fe-ds3103.fw', 'dvb-fe-rs6000.fw']
+        dvbsky_firmware_files: "{{dvbsky_firmware_files}} + ['dvb-demod-m88rs6000.fw']"
       when:
         - '"1ade:3038" in pci'
+        - ansible_distribution_version >= '15.04'  #driver only included since Kernel 3.19
   when:
     - not dvbsky_firmware_files
 
@@ -35,7 +36,7 @@
         state: absent
   when:
     - dvbsky_firmware_files is defined
-    - dvbsky_firmware_files | bool
+    - dvbsky_firmware_files
   tags:
     - install
     - autodetect

roles/autoinstall-firmware/meta/main.yml

@@ -1,3 +0,0 @@
----
-dependencies:
-  - { role: collect-facts }

roles/autoinstall-firmware/tasks/main.yml

@@ -1,33 +0,0 @@
----
-
-# This role provides easyily downloadable firmware files
-
-- name: Firmware dvb-demod-si2168-b40-01.fw for Hauppauge WinTV HD Solo/Duo, PCTV 292e
-  get_url:
-    url: https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-demod-si2168-b40-01.fw
-    checksum: sha256:8507536630d75a316d0719d6b95c04b90c36baa5b457ad457c9bacadafcef134
-    dest: /lib/firmware/dvb-demod-si2168-b40-01.fw
-  when: '"2040:0264" in usb or "2013:025f" in usb'
-
-- name: Firmware dvb-fe-xc5000-1.6.114.fw for Hauppauge WinTV-HVR-930C
-  get_url:
-    url: https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-fe-xc5000-1.6.114.fw
-    checksum: sha256:7104bda8df301fe1bd4c09de1708aeb6d0d8e1f9d55505449fecfad82639235f
-    dest: /lib/firmware/dvb-fe-xc5000-1.6.114.fw
-  when: '"2040:1605" in usb'
-
-- name: Firmware ngenge_18.fw for ngene cards
-  get_url:
-    url: http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw
-    checksum: sha256:213d98ec2cd575eba15d82ee79fed7098e670de43792f8aa773a95cfb7c32060
-    dest: /lib/firmware/ngene_18.fw
-  when: '"ngene" in modules'
-  notify: reboot required
-
-- name: Firmware drxk_a3.mc for drxk
-  get_url:
-     url: https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/drxk_a3.mc
-     checksum: sha256:f8956ad6f92a4ce90a6ab94ed23e2f9a27e9317e936fd3e0119778dd28e7e294
-     dest: /lib/firmware/drxk_a3.mc
-  when: '"ngene" in modules or "drxk" in modules'
-  notify: reboot required

roles/autoinstall-hardware-irmp/tasks/main.yml

@@ -5,4 +5,4 @@
   apt:
     name: yavdr-hardware-irmp
     state: present
-  when: '"1209:4444" in usb or "16c0:27d9" in usb'
+  when: '"1209:4444" in usb'

roles/autoinstall-satip/tasks/main.yml

@@ -12,5 +12,5 @@
   apt:
     name: vdr-plugin-satip
     state: present
-  when: satip_devices | bool
+  when: satip_devices
   notify: [ 'Restart VDR' ]

roles/autoinstall-ubuntu-drivers/tasks/main.yml

@@ -1,16 +1,15 @@
 ---
 # file roles/autoinstall-ubuntu-drivers/tasks/main.yml
-
-- name: autoinstall ubuntu-drivers-common
-  block:
-    - name: apt | install ubuntu-drivers-common
+- name: apt | install ubuntu-drivers-common
   apt:
     name: ubuntu-drivers-common
     state: present
 
-    - name: use ubuntu-drivers to install additional drivers automatically
+- name: ensure /etc/yavdr exists
+  file:
+    path: /etc/yavdr
+    state: directory
+    mode: 0755
+
+- name: let ubuntu-drivers automatically install additional drivers
   command: ubuntu-drivers --package-list /etc/yavdr/autoinstalled autoinstall
-  when: (ansible_virtualization_type != "virtualbox" and ansible_virtualization_role != "guest")
-        # ubuntu-drivers-common tries to autoinstall
-        # conflicting packages for virtualbox in Ubuntu 16.04 and 18.04 :(
-        # also alternates between virtualbox-guest-dkms and virtualbox-guest-dkms-hwe on successive runs

roles/autoinstall-virtualbox-guest/tasks/main.yml

@@ -1,41 +0,0 @@
----
-# file roles/autoinstall-virtualbox-guest/tasks/main.yml
-
-- name: collect facts about installed packages
-  package_facts:
-    manager: "apt"
-
-- name: install virtualbox guest additions
-  block:
-    - name: install packages
-      apt:
-        state: present
-        name:
-          - dkms
-          - '{{ "virtualbox-guest-x11-hwe" if "xserver-xorg-hwe-18.04" in ansible_facts.packages else "virtualbox-guest-x11" }}'
-          - '{{ "virtualbox-guest-dkms-hwe" if "linux-generic-hwe-18.04" in ansible_facts.packages else "virtualbox-guest-dkms" }}'
-
-    # TODO: set xineliboutput as frontend
-  when:
-    - ansible_virtualization_type == "virtualbox"
-    - ansible_virtualization_role == "guest"
-    - ansible_distribution == "Ubuntu"
-
-- name: set xineliboutput as frontend
-  block:
-    - apt:
-        name:
-          - vdr-plugin-xineliboutput
-          - xineliboutput-sxfe
-        state: present
-    - command: '{{ item }}'
-      with_items:
-        - vdrctl disable softhddevice
-        - vdrctl disable vaapidevice
-        - vdrctl disable xine
-        - vdrctl disable pvr350
-        - vdrctl enable xineliboutput
-      ignore_errors: yes
-  when:
-    - ansible_virtualization_type in ["virtualbox", "VirtualPC", "VMware"]
-    - ansible_virtualization_role == "guest"

roles/autoinstall-yausbir/meta/main.yml

@@ -1,3 +0,0 @@
----
-dependencies:
-    - { role: yavdr-remote }

roles/autoinstall-yausbir/tasks/main.yml

@@ -1,35 +0,0 @@
----
-# file roles/autoinstall-atric-usb/tasks/main.yml
-
-- name: install and configure Atric IR-WakeupUSB
-  block:
-    - name: apt | install lirc-drv-yausbir
-      apt:
-        name: lirc-drv-yausbir
-        state: present
-      tags:
-        - packages
-
-    - name: write lirc configuration
-      template:
-        src: templates/lirc_options.conf.j2
-        dest: /etc/lirc/lirc_options.conf
-      tags:
-        - config
-        - systemd
-
-    - name: enable lircd, eventlircd, lircd2uinput
-      systemd:
-        name: '{{ item }}'
-        enabled: yes
-        state: started
-        masked: no
-        daemon_reload: yes
-      with_items:
-        - eventlircd.service
-        - lircd2uinput.service
-        - lircd.service
-      tags:
-        - systemd
-
-  when: '"10c4:876c" in usb'

roles/autoinstall-yausbir/templates/lirc_options.conf.j2

@@ -1,20 +0,0 @@
-{{ ansible_managed | comment }}
-
-[lircd]
-nodaemon        = False
-driver          = ya_usbir
-output          = /var/run/lirc/lircd0
-pidfile         = /var/run/lirc/lircd0.pid
-plugindir       = /usr/lib/x86_64-linux-gnu/lirc/plugins
-permission      = 666
-allow-simulate  = No
-repeat-max      = 600
-#loglevel       = 6
-#release        = true
-#release_suffix = _EVUP
-#logfile        = ...
-#driver-options = ...
-
-[lircmd]
-uinput          = False
-nodaemon        = False

roles/collect-facts/defaults/main.yml

@@ -1 +0,0 @@
-

roles/collect-facts/tasks/main.yml

@@ -5,8 +5,6 @@
     modules: True
     gpus: True
     acpi_power_modes: True
-  tags:
-    - always
     
 - debug:
     var: '{{ item }}'
@@ -17,23 +15,3 @@
     - gpus
     - modules
     - acpi_power_modes
-    - nvidia_detected
-    - intel_detected
-    - amd_detected
-    - virtualbox_detected
-
-- name: get detailed PCI device information
-  pci_facts:
-  tags:
-    - always
-
-- debug:
-    var: pci_devices
-    verbosity: 1
-
-- name: known vdr output plugins
-  set_fact:
-    vdr_output_plugins:    
-      - softhddevice
-      - xineliboutput
-      - xine

roles/dvd/tasks/main.yml

@@ -8,20 +8,24 @@
 
 - name: apt | install libdvd-pkg
   apt:
-    name: libdvd-pkg
+    name: '{{ item }}'
     state: present
     install_recommends: no
+  with_items:
+    - 'libdvd-pkg'
 
-- name: reconfigure libdvd-pkg
-  dpkg_reconfigure:
-    pkg: libdvd-pkg
-    answers: |
-     libdvd-pkg/post-invoke_hook-install: boolean true
-     libdvd-pkg/build: boolean true
-
+- name: configure package libdvd-pkg
+  debconf:
+    name: 'libdvd-pkg'
+    question: '{{ item }}'
+    vtype: boolean
+    value: true
+  with_items:
+      - 'libdvd-pkg/post-invoke_hook-install'
+      - 'libdvd-pkg/build boolean'
+  notify: ['Reconfigure unattended upgrades with dpkg']
 
 - name: change udev rule to allow KODI to eject optical disks
   shell: sed 's/--lock-media //' /lib/udev/rules.d/60-cdrom_id.rules > /etc/udev/rules.d/60-cdrom_id.rules
   args:
     creates: /etc/udev/rules.d/60-cdrom_id.rules
-    warn: false

roles/epgd/defaults/main.yml

@@ -1,40 +0,0 @@
----
-# file: roles/epgd/defaults/main.yml
-
-epgd_dbhost: localhost
-epgd_dbport: 3306
-epgd_dbname: epg2vdr
-epgd_dbuser: epg2vdr
-epgd_dbpass: epg
-epgd_epgview: eventsview.sql
-epgd_epgviewweb: eventsviewplain.sql
-epgd_thetvdbview: thetvdbview.sql
-epgd_checkinitial: 1
-epgd_daysinadvance: 8
-epgd_daystoupdate: 4
-epgd_updatetime: 12
-epgd_updatethreshold: 500
-epgd_xmlstoretofs: 0
-epgd_getepgimages: 1
-# EpgImageSize
-# 0 = 174x130
-# 1 = 329x245
-# 2 = 525x400
-epgd_epgimagesize: 2
-epgd_maximagesperevent: 1
-epgd_seriesenabled: 1
-epgd_seriesport: 2006
-epgd_seriesstoretofs: 0
-epgd_seriesurl: www.eplists.de
-epgd_scrapepg: 1
-epgd_scrapRecordings: 1
-#epgd_scrapmoviedbapikey: ""
-epgd_cachepath: /var/cache/epgd/
-epgd_epghttpd_port: 9999
-#epgd_httpproxy: 127.0.0.1:8000
-epgd_httpproxy_username: ""
-epgd_httpproxy_password: ""
-epgd_LogLevel: 1
-epgd_epgdata_url: http://www.epgdata.com
-epgd_epgdata_pin: insert-your-pin-here
-epgd_epgdata_timeout: 180

roles/epgd/tasks/main.yml

@@ -1,98 +0,0 @@
----
-# file: roles/epgd/tasks/main.yml
-
-#Installing mariadb, epg-daemon and epg2vdr.
-#bind-address is set to 0.0.0.0 --> 99-epgd.cnf.
-#The root SQL password is only stored (NONE), because the epgd-tool
-#is expecting it. But it is not really used,
-#because the connection is established via a socket without a password.
-#Normal users must use sudo if they want to access mysql as root.
-#TODO:
-    # - Create channelmap if channels.conf is present.
-    #   (the script already exists at mld.)
-    # - because skindesigner-logos delivers only svg-logos, logoSuffix svg should be the preset --> vdr-epg-daemon / lib / parameters.c
-    # - customize epgd-tool for mariadb
-
-
-- name: MariaDB and Plugin | install
-  apt:
-    name: ['mariadb-server', 'mariadb-plugin-epglv', 'python-pymysql']
-    state: present
-    
-- name: copy file | epgd mariadb config
-  template:
-    src: templates/etc_mysql_mariadb.conf.d_99-epgd.cnf.j2
-    dest: /etc/mysql/mariadb.conf.d/99-epgd.cnf
-    owner: root
-    group: root
-
-- name: create /root/.ssh if it doesn't exist yes
-  file:
-    path: /root/.ssh
-    state: directory
-    owner: root
-    group: root
-    mode: 0700
-    
-- name: copy file | mysqlpasswd
-  template:
-    src: templates/root_.ssh_mysqlpasswd.j2
-    dest: /root/.ssh/mysqlpasswd
-    owner: root
-    group: root
-    mode: 0600
-    backup: yes
-
-- name: Restart mariadb
-  systemd:
-    name: mariadb.service
-    state: restarted
-    enabled: yes
-    masked: no
-    
-- name: Create a new database for epgd
-  mysql_db:
-    name: "{{ epgd_dbname }}"
-    encoding: utf8
-    state: present
-    login_unix_socket: /var/run/mysqld/mysqld.sock
-    
-- name: Create User for epgd database  
-  mysql_user:
-    name: "{{ epgd_dbuser }}"
-    password: "{{ epgd_dbpass }}"
-    host: '%'
-    priv: '{{ epgd_dbname }}.*:ALL'
-    state: present
-    login_unix_socket: /var/run/mysqld/mysqld.sock
-
-- name: Create User for epgd database  
-  mysql_user:
-    name: "{{ epgd_dbuser }}"
-    password: "{{ epgd_dbpass }}"
-    host: 'localhost'
-    priv: '{{ epgd_dbname }}.*:ALL'
-    state: present
-    login_unix_socket: /var/run/mysqld/mysqld.sock
-
-- name: create epgd config folder
-  file:
-   path: /etc/epgd
-   state: directory
-
-- name: epgd config
-  template:
-    src: templates/etc_epgd_epgd.conf.j2
-    dest: /etc/epgd/epgd.conf
-
-- name: epgd | install
-  apt:
-    name: ['vdr-epg-daemon', 'vdr-plugin-epg2vdr', 'skindesigner-logos']
-    state: present
-
-#- name: epgd | start
-  #systemd:
-    #name: epgd_service
-    #state: started
-    #enabled: yes
-    #masked: no

roles/epgd/templates/etc_epgd_epgd.conf.j2

@@ -1,74 +0,0 @@
-{{ ansible_managed | comment }}
-# ------------------------------------
-# Configuration of EPG Daemon
-# ------------------------------------
-
-DbHost = {{ epgd_dbhost }}
-DbPort = {{ epgd_dbport }}
-DbName = {{ epgd_dbname }}
-DbUser = {{ epgd_dbuser }}
-DbPass = {{ epgd_dbpass }}
-
-EpgView = {{ epgd_epgview }}
-EpgViewWeb = {{ epgd_epgviewweb }}
-TheTvDBView = {{ epgd_thetvdbview }}
-
-CheckInitial = {{ epgd_checkinitial }}
-DaysInAdvance = {{ epgd_daysinadvance }}
-DaysToUpdate = {{ epgd_daystoupdate }}
-UpdateTime = {{ epgd_updatetime }}
-UpdateThreshold = {{ epgd_updatethreshold }}
-
-XmlStoreToFs = {{ epgd_xmlstoretofs }}
-
-GetEPGImages = {{ epgd_getepgimages }}
-# EpgImageSize
-# 0 = 174x130
-# 1 = 329x245
-# 2 = 525x400
-EpgImageSize = {{ epgd_epgimagesize }}
-MaxImagesPerEvent = {{ epgd_maximagesperevent }}
-
-SeriesEnabled = {{ epgd_seriesenabled }}
-SeriesPort = {{ epgd_seriesport }}
-SeriesStoreToFs = {{ epgd_seriesstoretofs }}
-SeriesUrl = {{ epgd_seriesurl }}
-
-ScrapEpg = {{ epgd_scrapepg }}
-ScrapRecordings = {{ epgd_scrapRecordings }}
-{% if epgd_scrapmoviedbapikey is defined %}
-ScapMovieDbApiKey = {{ epgd_scrapmoviedbapikey }}
-{% else %}
-#ScrapMovieDbApiKey =
-{% endif %}
-
-{% if epgd_netdevice is defined %}
-NetDevice = {{ epgd_netdevice }}
-{% else %}
-# NetDevice = eth0
-{% endif %}
-
-CachePath = {{ epgd_cachepath }}
-HttpPort = {{ epgd_epghttpd_port }}
-
-{% if epgd_httpproxy is defined %}
-HttpProxy = {{ epgd_httpproxy }}
-UserName = {{ epgd_httpproxy_username }}
-Password = {{ epgd_httpproxy_password }}
-{% else %}
-# HttpProxy = 127.0.0.1:8000
-# UserName =
-# Password =
-{% endif %}
-
-LogLevel = {{ epgd_LogLevel }}
-
-# ---------------
-# epgdata plugin
-# ---------------
-
-epgdata.url = {{ epgd_epgdata_url }}
-epgdata.pin = {{ epgd_epgdata_pin }} 
-
-# Download timeout in seconds (default 180)
-epgdata.timeout = {{ epgd_epgdata_timeout }}

roles/epgd/templates/etc_mysql_mariadb.conf.d_99-epgd.cnf.j2

@@ -1,4 +0,0 @@
-{{ ansible_managed | comment }}
-[mysqld]
-bind-address            = 0.0.0.0
-

roles/epgd/templates/root_.ssh_mysqlpasswd.j2

@@ -1,2 +0,0 @@
-{{ ansible_managed | comment }}
-PASSWORD=NONE 

roles/grub-config/handlers/main.yml

@@ -1,10 +1,5 @@
 ---
 
-- name: Update Initramfs
-  command: "update-initramfs -u"
-  failed_when: ('error' in initramfs_register_update.stderr)
-  register: initramfs_register_update
-
 - name: Update GRUB
   command: update-grub
   failed_when: ('error' in grub_register_update.stderr)

roles/grub-config/templates/50_custom.j2

@@ -1,8 +1,8 @@
 #!/bin/sh
-{{ ansible_managed | comment }}
-
 exec tail -n +3 $0
 
+# This file is configured by the ansible configuration for yaVDR
+
 {% if system.shutdown is defined and system.shutdown == 'reboot' %}
 menuentry "PowerOff" {
     halt

roles/kodi/files/userdata/Lircmap.xml

@@ -1,4 +1,3 @@
-<?xml version="1.0" encoding="UTF-8"?>
 <lircmap>
 	<remote device="linux-input-layer">
 	<altname>cx23885_remote</altname>

roles/kodi/files/userdata/keymaps/remote.xml

@@ -1,4 +1,3 @@
-<?xml version="1.0" encoding="UTF-8"?>
 <!-- This file contains the mapping of keys (gamepad, remote, and keyboard) to actions within XBMC -->
 <!-- The <global> section is a fall through - they will only be used if the button is not          -->
 <!-- used in the current window's section.  Note that there is only handling                       -->

roles/kodi/tasks/configure-kodi.yml

@@ -35,9 +35,4 @@
       group: '{{ vdr.group }}'    
       mode: "0664"
       force: no
-
-- name: expand template for set-kodi-display
-  template:
-    src: 'templates/set-kodi-display.j2'
-    dest: '/usr/bin/set-kodi-display'
-    mode: "0755"
+# TODO: Add configuration files

roles/kodi/tasks/install-kodi.yml

@@ -2,24 +2,10 @@
 
 - name: apt | install kodi packages
   apt:
-    name:
+    name: '{{ item }}'
+    state: present
+    install_recommends: no
+  with_items:
     - kodi
     - kodi-pvr-vdr-vnsi
-      - python3-lxml
-    state: present
-    install_recommends: no
-
-- name: apt | install kodi-send (team-xbmc PPA)
-  apt:
-    name: "kodi-eventclients-xbmc-send" # team-xbmc uses "kodi-eventclients-xbmc-send for some reason
-    state: present
-    install_recommends: no
-  register: team_xbmc_ppa
-  ignore_errors: True
-
-- name: apt | install kodi-send (Ubuntu package)
-  apt:
-    name: "kodi-eventclients-kodi-send" # fallback to ubuntu package
-    state: present
-    install_recommends: no
-  when: team_xbmc_ppa.failed
+    - kodi-eventclients-xbmc-send

roles/kodi/tasks/main.yml

@@ -1,10 +1,2 @@
-- import_tasks: install-kodi.yml
-  tags:
-    - install
-    - update
-    - kodi:install
-- import_tasks: configure-kodi.yml
-  tags:
-    - install
-    - update
-    - kodi:configure
+- import_tasks: install-kodi.yml tags=install,update,kodi:install
+- import_tasks: configure-kodi.yml tags=install,update,kodi:configure

roles/kodi/templates/kodi.service.j2

@@ -6,7 +6,7 @@ Type=simple
 PassEnvironment=DISPLAY XDG_RUNTIME_DIR DBUS_SESSION_BUS_ADDRESS
 ExecStartPre=-/usr/bin/set-kodi-display
 ExecStart=/usr/bin/kodi -l /run/lirc/lircd
-ExecStop=/bin/bash -c "/usr/bin/kodi-send --action=QUIT; while ps -p $MAINPID -o comm=; do sleep .25; done"
+ExecStop=/bin/bash -c "/usr/bin/kodi-send --action=QUIT; while /usr/bin/pgrep kodi; do sleep 1;  done; sleep 1"
 TimeoutStopSec=10
-SuccessExitStatus=0 127 SIGKILL
+SuccessExitStatus=0 127
 Restart=on-failure

roles/kodi/templates/set-kodi-display.j2

@@ -1,117 +0,0 @@
-#!/usr/bin/env python3
-"""
-{{ ansible_managed }}
-
-This Script changes the monitor in KODI's guisettings.xml to the wanted output
-according to the DISPLAY environment variable. It works with KODI 18 (not KODI 17!).
-
-In order to change the display we need to modify the settings/videoscreen nodes.
-
-Basic algorithm:
-    - get the current videoscreen.monitor
-    - check if it needs to be changed
-    - create a backup of the videoscreen nodes in /var/lib/vdr/.kodi/.display_cache/{CONNETOR}-videoscreen.xml
-    - check if there is an existing backup for the new CONNECTOR
-    - parse the backup of the videoscreen nodes
-    - replace the videoscreen nodes with the backup data
-"""
-
-import copy
-import os
-import sys
-import subprocess
-from lxml import etree as ET
-
-
-GUISETTINGS = '/var/lib/vdr/.kodi/userdata/guisettings.xml'
-CACHE_DIR = '/var/lib/vdr/.kodi/.display_cache'
-VIDEOSCREEN_TEMPLATE = """<settings version="2">
-    <setting id="videoscreen.monitor">{}</setting>
-</settings>"""
-
-
-def create_cache_dir():
-    try:
-        os.makedirs(CACHE_DIR, exist_ok=True)
-    except PermissionError:
-        sys.exit(f"Error: insufficient permissions to create cachedir {CACHE_DIR}")
-    except Exception as e:
-        sys.exit(f"Unexpected Error when trying to create {CACHE_DIR}:", e)
-
-
-
-def get_output_name():
-    """
-    get display name from xrandr output for given DISPLAY environment variable
-    """
-    try:
-        xrandr_output = [
-            l for l in subprocess.check_output(
-                ["xrandr"],
-                env={"DISPLAY": os.environ["DISPLAY"]}
-            ).decode("utf-8").splitlines()
-        ]
-        return next(l.split()[0] for l in xrandr_output if " connected " in l)
-    except Exception as e:
-        sys.exit("could not determine output name", e)
-
-
-def parse_template(template_path, template, output=""):
-    """read videoscreen settings from backup or create a stub file"""
-    try:
-        xml_tree = ET.parse(template_path)
-    except OSError:
-        print(f"{template_path} not found, creating stub file", file=sys.stderr)
-        xml_template = ET.fromstring(template.format(output))
-        xml_tree = ET.ElementTree(xml_template)
-    finally:
-        xml_tree.write(template_path)
-    return xml_tree
-
-
-def main(output):
-    guisettings = parse_template(GUISETTINGS, VIDEOSCREEN_TEMPLATE, "Default")
-
-    # parse guisettings Etree for display name an backup videoscreen data
-    root = guisettings.getroot()
-    old_output = root.find("./setting[@id='videoscreen.monitor']").text
-    if old_output == output:
-        print("no changes necessary, exiting", file=sys.stderr)
-        sys.exit()
-
-    # create a minimal guisettings etree
-    xml_path = os.path.join(CACHE_DIR, f'{old_output}-videoscreen.xml')
-    base_tree = ET.fromstring('<settings version="2"></settings>')
-    xml_tree = ET.ElementTree(base_tree)
-    backup_root = xml_tree.getroot()
-
-    # copy videoscreen elements to backup etree
-    videoscreen_elements = root.xpath(
-            "./setting[starts-with(@id, 'videoscreen.')]")
-    for element in videoscreen_elements:
-        backup_root.append(copy.deepcopy(element))
-        element.getparent().remove(element)
-    xml_tree.write(xml_path)
-    print(f"written backup for {old_output} to {xml_path}", file=sys.stderr)
-
-    # change videoscreen node to content of backup file
-    xml_path = os.path.join(CACHE_DIR, f'{output}-videoscreen.xml')
-    videodir_xml = parse_template(xml_path, VIDEOSCREEN_TEMPLATE, output)
-    videodir_root = videodir_xml.getroot()
-    videoscreen = videodir_root.find("./setting[@id='videoscreen.monitor']")
-    # copy videoscreen.* elements from Backup
-    videoscreen_elements = videodir_root.xpath(
-            "./setting[starts-with(@id, 'videoscreen.')]")
-    for element in videoscreen_elements:
-        new_element = copy.deepcopy(element)
-        root.append(new_element)
-    guisettings.write(GUISETTINGS)
-
-
-if __name__ == '__main__':
-    create_cache_dir()
-    output = get_output_name()
-    try:
-        main(output)
-    except Exception as e:
-        print("Could not change videoscreen.* settings:", str(e), file=sys.stderr)

roles/nfs-server/tasks/main.yml

@@ -2,11 +2,12 @@
 
 - name: install nfs server packages
   apt:
-    name:
-      - nfs-kernel-server
-      - nfs-common
+    name: '{{ item }}'
     state: present
     install_recommends: no
+  with_items:
+    - nfs-kernel-server
+    - nfs-common
 
 - name: create /etc/exports
   template:

roles/nfs-server/templates/nfs-exports.j2

@@ -1,4 +1,4 @@
 /srv *(rw,fsid=0,sync,no_subtree_check,all_squash,anongid={{ vdr.gid }},anonuid={{ vdr.uid }})
-{% for name, path in media_dirs.items() | list %}
+{% for name, path in media_dirs.iteritems() %}
 {{ path }} *(rw,fsid={{ loop.index }},sync,no_subtree_check,all_squash,anongid={{ vdr.gid }},anonuid={{ vdr.uid }}{{ ',insecure' if nfs.insecure else '' }})
 {% endfor %}

roles/nvidia-387/tasks/main.yml

@@ -5,15 +5,12 @@
       repo: 'ppa:graphics-drivers/ppa'
       state: present
       update_cache: yes
-  tags:
-    - ppa
 
-- name: install nvidia-396 and other required packages
+- name: install nvidia-387 and other required packages
   apt:
-    name:
-      - nvidia-396
-      - nvidia-settings
+    name: '{{ item }}'
     state: present
     install_recommends: no
-  tags:
-    - packages
+  with_items:
+    - nvidia-387
+    - nvidia-settings

roles/pulseaudio/tasks/main.yml

@@ -1,13 +1,13 @@
 ---
 
-- name: apt | install pulseaudio, pavucontrol and vdr-plugin-pulsecontrol
+- name: apt | install pulseaudio and pavucontrol
   apt:
-    name:
-      - pulseaudio
-      - pavucontrol
-      - vdr-plugin-pulsecontrol
+    name: '{{ item }}'
     state: present
     install_recommends: no
+  with_items:
+    - pulseaudio
+    - pavucontrol
 
 - name: create /etc/asound.conf with pulseaudio as default device
   template:

roles/samba-config/templates/smb.conf.j2

@@ -1,4 +1,4 @@
-{{ ansible_managed | comment }}
+{{ ansible_managed_file | comment }}
 
 #======================= Global Settings =======================
 
@@ -69,8 +69,7 @@
 
 # This option controls how unsuccessful authentication attempts are mapped 
 # to anonymous connections
-   map to guest = bad password
-   guest account = nobody
+   map to guest = bad user
 
 {% if samba.windows_compatible %}
 # disable unix extensions and enable following symlinks
@@ -78,7 +77,7 @@
    follow symlinks= yes
    wide links= yes
 {% endif %}
-{% for name, path in media_dirs.items() | list %}
+{% for name, path in media_dirs.iteritems() %}
 [{{ name }}]
    path = {{ path }}
    comment = {{ name }} on %h

roles/samba-install/tasks/main.yml

@@ -3,10 +3,11 @@
 
 - name: install samba server
   apt:
-    name:
+    name: '{{ item }}'
+    state: present
+    install_recommends: no
+  with_items:
     - samba
     - samba-common
     - samba-common-bin
     - tdb-tools
-    state: present
-    install_recommends: no

roles/serial-ir/defaults/main.yml

@@ -1,4 +0,0 @@
---- 
-# file: roles/serial-ir/defaults/main.yml
-
-serial_ir_device: ttyS0

roles/serial-ir/tasks/main.yml

@@ -1,21 +0,0 @@
----
-# file: roles/serial-ir/tasks/main.yml
-
-- name: apt | install setserial
-  apt:
-    name: setserial
-
-- name: load serial_ir on startup
-  template:
-    src: roles/serial-ir/templates/modules-load.d/serial_ir.conf.j2
-    dest: /etc/modules-load.d/serial_ir.conf
-
-- name: serial_ir module options
-  template:
-    src: roles/serial-ir/templates/modprobe.d/serial_ir.conf.j2
-    dest: /etc/modprobe.d/serial_ir.conf
-
-- name: setserial options
-  template:
-    src: roles/serial-ir/templates/serial.conf.j2
-    dest: /etc/serial.conf

roles/serial-ir/templates/modprobe.d/serial_ir.conf.j2

@@ -1,12 +0,0 @@
-{{ ansible_managed | comment }}
-
-{% if serial_ir_device == "ttyS0" %}
-#COM1 equivalent, /dev/ttyS0
-options serial_ir irq=4 io=0x3f8
-{% elif serial_ir_device == "ttyS1" %}
-#COM2 equivalent, /dev/ttyS1
-options serial_ir irq=3 io=0x2f8
-{% endif %}
-{% if serial_ir_device in ("ttyS0", "ttyS1") %}
-install serial_ir setserial /dev/{{serial_ir_device}} uart none; /sbin/modprobe --ignore-install serial_ir
-{% endif %}

roles/serial-ir/templates/modules-load.d/serial_ir.conf.j2

@@ -1,3 +0,0 @@
-{{ ansible_managed | comment }}
-
-serial_ir

roles/serial-ir/templates/serial.conf.j2

@@ -1,9 +0,0 @@
-{{ ansible_managed | comment }}
-
-{% if serial_ir_device == "ttyS0" %}
-#COM1 equivalent, /dev/ttyS0
-/dev/ttyS0 uart none
-{% elif serial_ir_device == "ttyS1" %}
-#COM2 equivalent, /dev/ttyS1
-/dev/ttyS1 uart none
-{% endif %}

roles/vdr-plugin-menuorg/tasks/main.yml

@@ -1,15 +0,0 @@
----
-# file: roles/vdr-plugin-menuorg/tasks/main.yml
-
-- name: apt | install vdr-plugin-menuorg and yavdr-i18n
-  apt:
-    name:
-      - vdr-plugin-menuorg 
-      - yavdr-i18n
-    state: present
-    install_recommends: no
-
-- name: create /var/lib/vdr/plugins/menuorg.xml
-  template:
-    src: templates/menuorg.xml.j2
-    dest: /var/lib/vdr/plugins/menuorg.xml

roles/vdr-plugin-menuorg/templates/menuorg.xml.j2

@@ -1,51 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>                                                                                                                      
-{{ ansible_managed | comment('xml') }}
-<!--
-This is the config file for the Menuorg plug-in.
-See /usr/share/doc/vdr-plugin-menurg for examples and a full
-description of the config file format.
--->
-<menus>
-    <system name="Schedule" />
-    <system name="Channels" />
-    <system name="Timers" />
-    <system name="Recordings" />
-    <plugin name="tvguide" />
-    <command name="Kodi" execute="frontend-dbus-send switchto kodi" />
-    <plugin name="desktop" />
-    <menu name="{{ 'VDR Plugins' | translate }}">
-        <plugin name="epgsearchonly" />
-        <plugin name="quickepgsearch" />
-        <plugin name="conflictcheckonly" />
-        <plugin name="markad" />
-        <plugin name="recsearch" />
-        <plugin name="undelete" />
-        <plugin name="radio" />
-        <plugin name="osd2web" />
-    </menu>
-    <menu name="{{ 'System' | translate }}">
-         <menu name="{{ 'Commands' | translate }}">
-               <command name="{{ "Safely remove usb mass storage" | translate }}" confirm="yes" execute="/usr/bin/vdr-mounter --unmount-all &amp;> /dev/null" />
-               <command name="{{ "Update vdr recordings list" | translate }}" execute="/usr/bin/vdr-dbus-send /Recordings recording.Update &amp;> /dev/null " />
-               <command name="{{ "Restart VDR" |translate }}" confirm="yes" execute="sudo /sbin/initctl restart vdr" />
-               <command name="{{ "Reboot system"| translate }}" confirm="yes" execute="/usr/bin/at now -M -f /usr/bin/vdr-reboot" />
-               <command name="{{ "Shutdown system" | translate }}" execute="/usr/bin/lircd2uinput-send KEY_POWER2 &amp;> /dev/null &amp; " />
-         </menu>
-         <system name="Setup" />
-         <plugin name="femon" />
-         <plugin name="devstatus" />
-         <plugin name="epg2vdr" />
-         <plugin name="scraper2vdr" />
-         <plugin name="sndctl" />
-         <plugin name="suspendoutput" />
-         <plugin name="recstatus" />
-         <plugin name="dynamite" />
-         <plugin name="noepgmenu" />
-         <plugin name="systeminfo" />
-         <plugin name="filebrowser" />
-         <plugin name="pin" />
-         <plugin name="pulsecontrol" />
-         <plugin name="softhddevice" />
-         </menu>
-    <system name="Commands" />
-</menus>

roles/vdr/tasks/main.yml

@@ -3,12 +3,13 @@
 
 - name: apt | install basic vdr packages
   apt:
-    name:
+    name: '{{ item }}'
+    state: present
+    install_recommends: no
+  with_items:
     - vdr
     - vdrctl
     - vdr-plugin-dbus2vdr
-    state: present
-    install_recommends: no
 - name: add svdrp and svdrp-disc to /etc/services
   lineinfile:
     dest: /etc/services
@@ -29,10 +30,11 @@
   blockinfile:
     dest: /etc/vdr/conf.d/04-vdr-hide-first-recordinglevel.conf
     create: true
-    state: "{{ 'present' if vdr.hide_first_recording_level else 'absent' }}"
     block: |
       [vdr]
       --hide-first-recording-level
+  when:
+    vdr.hide_first_recording_level
 
 - name: create local dir in recdir
   file:
@@ -47,9 +49,11 @@
 # TODO: set recdir, user etc. in /etc/vdr/conf.d/
 - name: apt | install additional vdr plugins
   apt:
-    name: '{{ vdr_plugins | default([]) }}'
+    name: '{{ item }}'
     state: present
     install_recommends: no
+  with_items:
+    '{{ vdr_plugins | default({}) }}'
   notify: [ 'Restart VDR' ]
 - name: ensure vdr is stopped
   systemd:
@@ -66,105 +70,11 @@
     mode: 0644
     force: no
 
-- name: "vdr configuration | copy keymacros.conf"
+- name: "vdr configuration | copy keymacros.conf if it doesn't exist yet"
   copy:
     src: files/keymacros.conf
-    dest: '{{ vdr.etc_confdir }}/keymacros.conf'
+    dest: '{{ vdr.confdir }}/keymacros.conf'
     owner: '{{ vdr.user }}'
     group: '{{ vdr.group }}'
     mode: 0644
     force: no
-
-- name: "vdr configuration | copy channels.conf if it doesn't exist yet"
-  copy:
-    src: '{{ vdr_channels_conf }}'
-    dest: '{{ vdr.confdir }}/channels.conf'
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-    mode: 0644
-    force: no
-  when: vdr_channels_conf is defined
-
-- name: "vdr configuration | download channels.conf if it doesn't exist yet"
-  get_url:
-    url: '{{ vdr_channels_conf_url }}'
-    dest: '{{ vdr.confdir }}/channels.conf'
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-    mode: 0644
-    force: no
-  when: vdr_channels_conf is not defined and vdr_channels_conf_url is defined
-
-- name: "vdr configuration | svdrphosts.conf"
-  template:
-    src: templates/svdrphosts.conf.j2
-    dest: '{{ vdr.etc_confdir }}/svdrphosts.conf'
-    mode: 0644
-  vars:
-    svdrphosts: '{{ vdr_svdrphosts | default(vdr_allowed_hosts) }}'
-
-- name: "vdr configuration | /etc/default/vdr"
-  template:
-    src: templates/default_vdr.j2
-    dest: /etc/default/vdr
-- name: ensure directory '/etc/vdr/xineliboutput' exists
-  file:
-    state: directory
-    mode: 0775
-    dest: '/etc/vdr/plugins/xineliboutput'
-  
-- name: "vdr configuration | allowed_hosts.conf for xineliboutput"
-  template:
-    src: templates/generic_allowed_hosts.conf.j2
-    dest: '/etc/vdr/plugins/{{ vdr_service }}/allowed_hosts.conf'
-    mode: 0644
-  vars:
-    allowed_hosts: '{{ xineliboutput_allowed_hosts | default(vdr_allowed_hosts) }}'
-    vdr_service: xineliboutput
-
-- name: "vdr configuration | xineliboutput.conf host settings"
-  template:
-    src: templates/xineliboutput.conf.j2
-    dest: /etc/vdr/conf.avail/xineliboutput.conf
-    mode: 0644
-  vars:
-    allowed_hosts: '{{ xineliboutput_allowed_hosts | default(vdr_allowed_hosts) }}'
-- name: ensure directory '/etc/vdr/plugins/vnsiserver' exists
-  file:
-    state: directory
-    mode: 0775
-    dest: '/etc/vdr/plugins/vnsiserver'
-  
-- name: "vdr configuration | allowed_hosts.conf for vnsiserver"
-  template:
-    src: templates/generic_allowed_hosts.conf.j2
-    dest: '/etc/vdr/plugins/{{ vdr_service }}/allowed_hosts.conf'
-    mode: 0644
-  vars:
-    allowed_hosts: '{{ vnsiserver_allowed_hosts | default(vdr_allowed_hosts) }}'
-    vdr_service: vnsiserver
-- name: ensure directory '/etc/vdr/plugins' exists
-  file:
-    state: directory
-    mode: 0775
-    dest: '/etc/vdr/plugins/'
-  
-- name: "vdr configuration | streamdevhosts.conf for streamdev-server"
-  template:
-    src: templates/generic_allowed_hosts.conf.j2
-    dest: '/etc/vdr/plugins/streamdevhosts.conf'
-    mode: 0644
-  vars:
-    allowed_hosts: '{{ streamdev_server_allowed_hosts | default(vdr_allowed_hosts) }}'
-    vdr_service: streamdev-server
-- name: create directory for vdr.service systemd drop-in files
-  file:
-    dest: '{{ item }}'
-    state: directory
-  with_items:
-    - "/etc/systemd/system/vdr.service.d/"
-
-- name: systemd-drop-in | start vdr.service after network-online.target
-  template:
-    src: templates/systemd/network-online.j2
-    dest: /etc/systemd/system/vdr.service.d/network-online.conf

roles/vdr/templates/default_vdr.j2

@@ -1,7 +0,0 @@
-{{ ansible_managed | comment }}
-# /etc/default/vdr
-#
-# See also /usr/share/doc/vdr/README.Debian.gz
-#
-
-SHUTDOWNCMD="{{ vdr_shutdown_command }}"

roles/vdr/templates/generic_allowed_hosts.conf.j2

@@ -1,22 +0,0 @@
-{{ ansible_managed | comment }}
-# This file describes a number of host addresses that
-# are allowed to connect to the {{ vdr_service }}
-# running with the Video Disk Recorder (VDR) on this system.
-#
-# Syntax:
-#
-# IP-Address[/Netmask]
-#
-# Examples:
-#
-# 192.168.100.0/24     # any host on the local net
-# 204.152.189.113      # a specific host
-{% if vdr_service == 'streamdev-server' %}
-# 239.255.0.0/16       # uncomment for IGMP multicast streaming
-{% endif %}
-# 0.0.0.0/0            # any host on any net (USE THIS WITH CARE!)
-
-127.0.0.1              # always accept localhost
-{% for host_or_subnet in allowed_hosts %}
-{{ host_or_subnet }}
-{% endfor %}

roles/vdr/templates/svdrphosts.conf.j2

@@ -1,18 +0,0 @@
-{{ ansible_managed | comment }}
-#
-# svdrphosts    This file describes a number of host addresses that
-#               are allowed to connect to the SVDRP port of the Video
-#               Disk Recorder (VDR) running on this system.
-# Syntax:
-#
-# IP-Address[/Netmask]
-#
-# Examples:
-# 192.168.100.0/24     # any host on the local net
-# 204.152.189.113      # a specific host
-# 0.0.0.0/0            # any host on any net (USE THIS WITH CARE!)
-
-127.0.0.1              # always accept localhost
-{% for host_or_subnet in svdrphosts %}
-{{ host_or_subnet }}
-{% endfor %}

roles/vdr/templates/systemd/network-online.j2

@@ -1,3 +0,0 @@
-{{ansible_managed | comment }}
-[Unit]
-After=network-online.target

roles/vdr/templates/xineliboutput.conf.j2

@@ -1,13 +0,0 @@
-#
-# Command line parameters for vdr-plugin-xineliboutput
-#
-# For more details see:
-#   - /usr/share/doc/vdr-plugin-xineliboutput/README.Debian
-#   - `vdr --help -Pxineliboutput`
-#   - /usr/share/doc/vdr-plugin-xineliboutput/README
-#
-[xineliboutput]
---local=none
---primary
---remote={{ "" if allowed_hosts else "127.0.0.1" }}:37890
---truecolor

roles/wakeup/tasks/main.yml

@@ -2,12 +2,14 @@
 # file roles/wakeup/tasks/main.yml
 
 - name: install and configure vdr-addon-acpiwakeup
-  apt:
+  block:
+    - apt:
       name: vdr-addon-acpiwakeup
       state: present
-  when: wakeup_method == "acpiwakeup"
       
-- name: expand template for /etc/vdr/vdr-addon-acpiwakeup.conf
-  template:
-    src: templates/vdr-addon-acpiwakeup.conf.j2
-    dest: /etc/vdr/vdr-addon-acpiwakeup.conf
+    - lineinfile:
+        path: /etc/vdr/vdr-addon-acpiwakeup.conf
+        regexp: '^ACPI_ENABLED='
+        line: 'ACPI_ENABLED=true'
+
+  when: wakeup_method == "acpiwakeup"

roles/wakeup/templates/vdr-addon-acpiwakeup.conf.j2

@@ -1,16 +0,0 @@
-{{ ansible_managed | comment }}
-
-# Activate/deactivate ACPIWakeup with yes/no:
-ACPI_ENABLED="{% if wakeup_method == 'acpiwakeup' %}yes{% else %}no{% endif %}"
-
-# How many minutes should the machine wake up before the timer starts:
-ACPI_START_AHEAD=5
-
-# If you want your VDR machine to wakeup in regular intervals (i.e. for
-# updating EPG data), specify the days of the week and the wakeup time.
-#
-# Days of the week for regular wakeup (not set=Disabled, 1=Monday...7=Sunday)
-# ACPI_REGULAR_DAYS="1 2 3 4 5 6 7"
-
-# Wakeup time
-#ACPI_REGULAR_TIME=01:00  # HH:MM

roles/yavdr-common/defaults/main.yml

@@ -28,4 +28,3 @@ vdr:
     hide_first_recording_level: false
     safe_dirnames: true
     override_vdr_charset: false
-vdr_allowed_hosts: []

roles/yavdr-common/tasks/configure_apt.yml

@@ -8,10 +8,8 @@
   apt_repository:
       repo: '{{ item }}'
       state: present
-      update_cache: no
+      update_cache: yes
   with_items: '{{ repositories }}'
-  tags:
-    - ppa
 
 - name: run apt-get dist-upgrade
   apt:

roles/yavdr-common/tasks/configure_system.yml

@@ -24,14 +24,12 @@
     state: present
     regexp: '^(Prompt=).*$'
     line: '\1never'
-  ignore_errors: yes
-  with_first_found:
-    - files:
-      - /etc/update-manager/release-upgrades
-      errors: ignore
 - name: apt | install basic packages
   apt:
-    name:
+    name: '{{ item }}'
+    state: present
+    install_recommends: no
+  with_items:
     - anacron
     - acl
     - at
@@ -40,7 +38,6 @@
     - debconf-utils
     - linux-firmware
     - psmisc
-      - python-jmespath
     - python-kmodpy
     - python-requests
     - python-usb
@@ -51,11 +48,10 @@
     - wpasupplicant
     - usbutils
     - xfsprogs
-      - yavdr-i18n
-    state: present
-    install_recommends: no
 - name: apt | install extra packages
   apt:
-    name: '{{ extra_packages }}'
+    name: '{{ item }}'
     state: present
     install_recommends: no
+  with_items:
+      '{{ extra_packages }}'

roles/yavdr-common/tasks/create_directories.yml

@@ -1,14 +1,3 @@
-- name: ensure /etc/yavdr exists
-  file:
-    path: /etc/yavdr
-    state: directory
-    mode: 0755
-
-- name: touch /etc/yavdr/autoinstalled (this file must exist)
-  file:
-    path: /etc/yavdr/autoinstalled
-    state: touch
-
 - name: create media directories
   file:
     dest: '{{ item.value }}'

roles/yavdr-common/tasks/create_sudoers.yml

@@ -1,6 +0,0 @@
-- name: create /etc/sudoers.d/yavdr from template
-  template:
-    src: templates/yavdr.sudoers.j2
-    dest: /etc/sudoers.d/yavdr
-    mode: '0444'
-    validate: visudo -cf %s

roles/yavdr-common/tasks/main.yml

@@ -6,6 +6,4 @@
         - import_tasks: configure_apt.yml
         - import_tasks: configure_system.yml
         - import_tasks: create_directories.yml
-        - import_tasks: create_sudoers.yml
-        - import_tasks: standby_support.yml
   tags: [install]

roles/yavdr-common/tasks/standby_support.yml

@@ -1,11 +0,0 @@
-- name: create /usr/local/bin/module-helper
-  template:
-    src: templates/module-helper.j2
-    dest: /usr/local/bin/module-helper
-    mode: '0755'
-
-- name: create standby hooks /lib/systemd/system-sleep/yavdr
-  template:
-    src: templates/system-sleep_yavdr.j2
-    dest: /lib/systemd/system-sleep/yavdr
-    mode: '0755'

roles/yavdr-common/templates/90-norecommends.j2

@@ -1,4 +1,4 @@
-{{ ansible_managed | comment('c') }}
+{{ ansible_managed_file | comment('c') }}
 // Recommends are as of now still abused in many packages
 APT::Install-Recommends "0";
 APT::Install-Suggests "0";

roles/yavdr-common/templates/module-helper.j2

@@ -1,77 +0,0 @@
-#!/usr/bin/env python3
-# {{ ansible_managed | comment }}
-# based on http://www.e-tobi.net/blog/files/module-helper
-# http://www.e-tobi.net/blog/2010/11/06/squeeze-vdr-teil-9-suspend-to-ram
-# ported to python3 by Alexander Grothe
-#
-# This script resolves linux kernel module dependencies automatically, so only
-# the base module has to be specified (e.g. dvb_core)
-
-import argparse
-import subprocess
-import pickle
-
-dependency_map = {}
-
-
-def find_dependencies(module, dependencies=[]):
-    dependencies.append(module)
-    if module in dependency_map:
-        for dependency in dependency_map[module]:
-            find_dependencies(dependency, dependencies)
-    return dependencies
-
-
-def build_module_dependency_map():
-    with subprocess.Popen(['lsmod'],
-                          stdout=subprocess.PIPE,
-                          universal_newlines=True
-                          ) as p:
-        for line in p.stdout:
-            values = line.split()
-            if len(values) > 3:
-                #print("module {} depends on {}".format(values[0], values[3]))
-                dependency_map[values[0]] = values[3].split(',')
-
-
-def run_command_on_module_list(command, module_list):
-    for module in module_list:
-        cmd = [command, module]
-        subprocess.call(cmd)
-
-
-def create_argparser():
-    parser = argparse.ArgumentParser(description="load or unload modules")
-    group = parser.add_mutually_exclusive_group()
-    group.add_argument('-u', '--unload', metavar='MODULE', nargs='+',
-                       help='unload modules')
-    group.add_argument('-r', '--reload', action='store_true',
-                       help='reload modules')
-    parser.add_argument('-t', '--temp-file', nargs='?',
-                        default='/tmp/modules.list',
-                        help='''store names of unloaded modules in a file,
-                              default location is /tmp/modules.list''')
-    return parser
-
-if __name__ == '__main__':
-    parser = create_argparser()
-    args = parser.parse_args()
-    if args.unload:
-        build_module_dependency_map()
-        all_modules = []
-        for module in args.unload:
-            all_modules.extend(find_dependencies(module))
-        all_modules.reverse()
-        try:
-            with open(args.temp_file, 'wb') as f:
-                pickle.dump(all_modules, f)
-            run_command_on_module_list('rmmod', all_modules)
-        except Exception as e:
-            print(e)
-            pass
-    elif args.reload:
-        with open(args.temp_file, 'rb') as f:
-            all_modules = pickle.load(f)
-        run_command_on_module_list('modprobe', all_modules)
-    else:
-        parser.print_help()

roles/yavdr-common/templates/system-sleep_yavdr.j2

@@ -1,21 +0,0 @@
-#!/bin/bash
-{{ ansible_managed | comment }}
-
-case $1 in
-  pre)
-    /bin/systemctl stop vdr
-    /usr/local/bin/module-helper -u dvb_core
-    ;;
-  post)
-    # reload rc-core keytables
-    [ -x /usr/bin/ir-keytable ] && {
-        for remote in $(ir-keytable 2>&1 | grep rc/rc | egrep -o "rc[0-9]{1,}")
-        do 
-            ir-keytable -a /etc/rc_maps.cfg --sysdev $remote
-        done
-    }
-
-    /usr/local/bin/module-helper -r
-    /bin/systemctl start vdr
-    ;;
-esac

roles/yavdr-common/templates/yavdr.sudoers.j2

@@ -1,2 +0,0 @@
-{{ vdr.user }} ALL=NOPASSWD: /bin/systemctl --no-block restart vdr.service
-{{ vdr.user }} ALL=NOPASSWD: /bin/systemctl --no-block reboot

roles/yavdr-desktop/tasks/main.yml

@@ -1,160 +0,0 @@
----
-# file: roles/yavdr-desktop/tasks/main.yml
-
-- name: create folders for user configuration files
-  file:
-    state: directory
-    dest: '{{ item }}'
-    mode: '0775'
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-  with_items:
-    - '{{ vdr.home }}/.config/systemd/user'
-    - '{{ vdr.home }}/.config/openbox'
-    - '{{ vdr.home }}/.config/pulse'
-    - '{{ vdr.home }}/bin'
-
-- name: expand template for .xinitrc for vdr user
-  template:
-      src: 'templates/.xinitrc.j2'
-      dest: '{{ vdr.home }}/.xinitrc'
-      mode: 0755
-      owner: '{{ vdr.user }}'
-      group: '{{ vdr.group }}'
-
-- name: "expand template for vdr's .Xresources"
-  template:
-      src: 'templates/.Xresources.j2'
-      dest: '{{ vdr.home }}/.Xresources'
-      mode: 0644
-      owner: '{{ vdr.user }}'
-      group: '{{ vdr.group }}'
-
-- name: expand template for openbox autostart
-  template:
-      src: 'templates/openbox/autostart.j2'
-      dest: '{{ vdr.home }}/.config/openbox/autostart'
-      mode: 0755
-      owner: '{{ vdr.user }}'
-      group: '{{ vdr.group }}'
-
-- name: expand rc.xml for openbox
-  template:
-      src: 'templates/openbox/rc.xml.j2'
-      dest: '{{ vdr.home }}/.config/openbox/rc.xml'
-      mode: 0644
-      owner: '{{ vdr.user }}'
-      group: '{{ vdr.group }}'
-
-- name: expand rc2.xml for openbox on second display
-  template:
-      src: 'templates/openbox/rc2.xml.j2'
-      dest: '{{ vdr.home }}/.config/openbox/rc2.xml'
-      mode: 0644
-      owner: '{{ vdr.user }}'
-      group: '{{ vdr.group }}'
-
-- name: create yavdr-desktop.target for the user session
-  template:
-      src: 'templates/systemd/user/yavdr-desktop.target.j2'
-      dest: '{{ vdr.home }}/.config/systemd/user/yavdr-desktop.target'
-      mode: 0644
-      owner: '{{ vdr.user }}'
-      group: '{{ vdr.group }}'
-
-- name: disable pulseaudio autospawning
-  lineinfile:
-    path: '{{ vdr.home }}/.config/pulse/client.conf'
-    line: 'autospawn = yes'
-    create: yes
-    state: present
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-
-- name: create tmux.service for the session
-  template:
-    src: 'templates/systemd/user/tmux.service.j2'
-    dest: '{{ vdr.home }}/.config/systemd/user/tmux.service'
-    mode: 0644
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-
-- name: create wm-exit.service for the session
-  template:
-    src: templates/systemd/user/wm-exit.service.j2
-    dest: '{{ vdr.home }}/.config/systemd/user/wm-exit.service'
-    mode: 0644
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-
-- name: create detect-second-display.service for the session
-  template:
-    src: templates/systemd/user/detect-second-display.service.j2
-    dest: '{{ vdr.home }}/.config/systemd/user/detect-second-display.service'
-    mode: 0644
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-
-- name: create detect-second-diplay script
-  template:
-    src: templates/bin/detect-second-display.j2
-    dest: '{{ vdr.home }}/bin/detect-second-display'
-    mode: 0755
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-
-- name: create switch-displays script
-  template:
-    src: templates/bin/switch-displays.j2
-    dest: '{{ vdr.home }}/bin/switch-displays'
-    mode: 0755
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-
-- name: create openbox-second.service for the session
-  template:
-    src: templates/systemd/user/openbox-second.service.j2
-    dest: '{{ vdr.home }}/.config/systemd/user/openbox-second.service'
-    mode: 0644
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-
-- name: create osd2web.service for the session
-  template:
-    src: templates/systemd/user/osd2web.service.j2
-    dest: '{{ vdr.home }}/.config/systemd/user/osd2web.service'
-    owner: '{{ vdr.user }}'
-    group: '{{ vdr.group }}'
-    mode: 0644
-
-- name: create irexec configuration for the session
-  block:
-    - template:
-        src: templates/systemd/user/irexec.service.j2
-        dest: '{{ vdr.home }}/.config/systemd/user/irexec.service'
-        mode: 0644
-        owner: '{{ vdr.user }}'
-        group: '{{ vdr.group }}'
-    - template:
-        src: templates/.lircrc.j2
-        dest: '{{ vdr.home }}/.lircrc'
-        mode: 0644
-        owner: '{{ vdr.user }}'
-        group: '{{ vdr.group }}'
-        force: no
-
-- name: set up udiskie
-  include_tasks: udiskie.yml
-
-- name: link /usr/bin/start-desktop to /var/lib/vdr/plugins/desktop/starter
-  file:
-    src: /usr/bin/start-desktop
-    dest: /var/lib/vdr/plugins/desktop/starter
-    state: link
-  
-- name: enable and start yavdr-xorg for the vdr user
-  systemd:
-    daemon_reload: yes
-    name: 'yavdr-xorg'
-    enabled: yes
-    state: started

roles/yavdr-desktop/tasks/udiskie.yml

@@ -1,27 +0,0 @@
-- name: install udiskie
-  apt:
-    name:
-      - udiskie
-
-- name: create ~/.config/udiskie
-  file:
-    name: '{{ vdr.home }}/.config/udiskie'
-    state: directory
-
-- name: expand template for udiskie's config.yml
-  template:
-    src: templates/udiskie/config.yml.j2
-    dest: '{{ vdr.home }}/.config/udiskie/config.yml'
-
-- name: expand template for mount helper script
-  template:
-    src: templates/udiskie/udiskie_vdr_mount_helper.j2
-    dest: '{{ vdr.home }}/bin/udiskie_vdr_mount_helper'
-    mode: 0755
-    owner: vdr
-    group: vdr
-
-- name: expand template for udiskie vdr commands
-  template:
-    src: templates/udiskie/umount_all.j2
-    dest: /usr/share/vdr/command-hooks/commands.udiskie.conf

roles/yavdr-desktop/templates/.Xresources.j2

@@ -1,16 +0,0 @@
-xterm*background: Black
-xterm*foreground: grey
-XTerm*locale: true
-XTerm*metaSendsEscape: true
-XTerm*eightBitInput: false
-XTerm*backarrowKey: false
-XTerm*ttyModes: erase ^?
-Xterm*saveLines: 4096
-XTerm.vt100.metaSendsEscape: true
-XTerm.vt100.geometry: 80x32
-XTerm.vt100.renderFont: true
-xterm*faceName: xft:DejaVu Sans Mono
-xterm*faceSize: 14
-xterm*renderFont: true
-XTerm.vt100.faceName: xft:DejaVu Sans Mono:size=12:antialias=false
-XTerm.vt100.font: 7x13

roles/yavdr-desktop/templates/.lircrc.j2

@@ -1,5 +0,0 @@
-begin
-    prog = irexec
-    button = KEY_HOME
-    config = frontend-dbus-send switchbetween kodi vdr
-end

roles/yavdr-desktop/templates/bin/detect-second-display.j2

@@ -1,9 +0,0 @@
-#!/bin/bash
-source <(systemctl --user show-environment)
-SECOND_DISPLAY="${DISPLAY%\.[0-9]*}.1"
-if xrandr -d "$SECOND_DISPLAY" -q | grep -q "connected"; then
-    [ "$DISPLAY" != "$SECOND_DISPLAY" ] && d="DISPLAY=$SECOND_DISPLAY" || d="DISPLAY=$DISPLAY"
-    echo "$d" > ~/.second_display;
-else
-    rm -f ~/.second_display
-fi

roles/yavdr-desktop/templates/bin/switch-displays.j2

@@ -1,9 +0,0 @@
-#!/bin/bash
-source <(systemctl --user show-environment)
-[[ "$DISPLAY" =~ \.1$ ]] && DISPLAY="${DISPLAY%.1}.0" || DISPLAY="${DISPLAY%.0}.1"
-
-frontend-dbus-send stop
-systemctl --user stop osd2web
-frontend-dbus-send setDisplay "$DISPLAY"
-systemctl --user start osd2web
-frontend-dbus-send start

roles/yavdr-desktop/templates/systemd/user/detect-second-display.service.j2

@@ -1,10 +0,0 @@
-[Unit]
-Description=Detect second DISPLAY using xrandr
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-ExecStart=%h/bin/detect-second-display
-
-[Install]
-WantedBy=yavdr-desktop.target

roles/yavdr-desktop/templates/systemd/user/irexec.service.j2

@@ -1,9 +0,0 @@
-[Unit]
-Description=LIRC command handler
-
-[Service]
-Type=simple
-ExecStart=/usr/bin/irexec %h/.lircrc
-
-[Install]
-WantedBy=yavdr-desktop.target

roles/yavdr-desktop/templates/udiskie/config.yml.j2

@@ -1,25 +0,0 @@
-#!/bin/bash
-{{ ansible_managed | comment }}
-
-program_options:
-  tray:             false    # [bool] Enable the tray icon. "auto"
-  menu:             flat    # ["flat" | "nested"] Set the
-  automount:        true   # [bool] Enable automatic mounting.
-  notify:           true    # [bool] Enable notifications.
-  password_cache:   false      # [int] Password cache in minutes. Caching is
-
-  file_manager:     ""
-  notify_command: "{{ vdr.home }}/bin/udiskie_vdr_mount_helper '{event}' '{device_presentation}' '{mount_path}'"
-
-device_config:
-  - is_loop: true
-    ignore: true
-
-  - is_external: false
-    ignore: true
-
-notifications:
-  device_mounted:   5       # mount notification
-  device_unmounted: true   # unmount notification
-  device_added:     true   # device has appeared
-  device_removed:   true   # device has disappeared

roles/yavdr-desktop/templates/udiskie/udiskie_vdr_mount_helper.j2

@@ -1,46 +0,0 @@
-#!/bin/bash
-{{ ansible_managed | comment }}
-
-videodir="{{ vdr.recdir }}"
-event="$1"
-device_node="$2"
-mount_path="$3"
-
-
-logger -t "mount-notification" "event: $event, device: $device_node, mount_path: $mount_path"
-case "$event" in
-    'device_mounted')
-        target="${videodir}/$(basename "${mount_path}")"
-        ln -s -T "$mount_path" "$target" ||
-            { logger -t "vdr recordings found" "mountpoint already exists, aborting"; exit; }
-        # check if we got a vdr recording on the mountpoint
-        if [ -n $(find "$mount_path" -name "*.rec" -print -quit 2>/dev/null) ]
-        then
-            vdr-dbus-send /Skin skin.QueueMessage string:"$mount_path mounted (with recordings)"
-            svdrpsend updr
-        else
-            vdr-dbus-send /Skin skin.QueueMessage string:"$mount_path' mounted"
-        fi
-        ;;
-    'device_unmounted')
-        removed_symlinks=($(find "$videodir" -xtype l -delete -print))
-        logger -t "device umounted" "remove unneeded symlinks: $(paste -d " " <<< "${removed_symlinks[@]}")"
-        vdr-dbus-send /Skin skin.QueueMessage string:"$device_node umounted"
-        svdrpsend updr
-        ;;
-    'device_removed')
-        removed_symlinks=($(find "$videodir" -xtype l -delete -print))
-        [ -z "$device_node" ] && exit
-        logger -t "device removed" "remove unneeded symlinks: $(paste -d " " <<< "${removed_symlinks[@]}")"
-        vdr-dbus-send /Skin skin.QueueMessage string:"$device_node removed"
-        svdrpsend updr
-        ;;
-    'job_failed')
-        if [ -n "$mount_path" ]
-        then
-            logger -t "umount failed" "could not unmount $mount_path"
-        else
-            logger -t "operation failed" 'could not mount(?) '"$device_node"
-        fi
-        ;;
-esac

roles/yavdr-desktop/templates/udiskie/umount_all.j2

@@ -1,4 +0,0 @@
-#!/bin/bash
-{{ ansible_managed | comment }}
-
-{{ "Safely remove usb mass storage" | translate }} : echo 'svdrpsend mesg "$(udiskie-umount -a 2>&1 | grep -o "Error unmounting.*")"' | at now

roles/yavdr-network/tasks/main.yml

@@ -1,9 +1,12 @@
 ---
 # this playbook sets up network services for a yaVDR installation
 
-- name: apt | install packages for network services
+- name: apt |install packages for network services
   apt:
-      name:
+      name: '{{ item }}'
+      state: present
+      install_recommends: no
+  with_items:
       - avahi-daemon
       - avahi-utils
       #- biosdevname # caution: this may change device names after a minimal installation!
@@ -11,8 +14,6 @@
       - nfs-common
       - vdr-addon-avahi-linker
       - wakeonlan
-      state: present
-      install_recommends: no
 
 # Does this really work? We need a way to check if an interface supports WOL - Python Skript?
 # - name: check WOL capabilities of network interfaces

roles/yavdr-remote/defaults/main.yml

@@ -1 +0,0 @@
-lircd0_socket: /var/run/lirc/lircd0

roles/yavdr-remote/tasks/main.yml

@@ -1,29 +1,22 @@
 ---
 # This role is used to set up the yaVDR remote control configuration.
 
-- name: apt | install packages for remote support
+- name: apt | install yavdr-remote
   apt:
-    name:
-      - yavdr-remote
-      - lirc
+    name: yavdr-remote
     state: present
-  tags:
-    - packages
 
-- name: add systemd drop-in for lircd to use lircd2uinput
-  block:
-    - name: create directory /etc/systemd/system/lircd.service.d/
-      file:
-        path: /etc/systemd/system/lircd.service.d/
-        state: directory
-    - name: expand template for /etc/systemd/system/lircd.service.d/lircd2uinput.conf
-      template:
-        src: templates/lircd.service.d/lircd2uinput.conf.j2
-        dest: /etc/systemd/system/lircd.service.d/lircd2uinput.conf
-  tags:
-    - config
+- name: apt | install eventlircd
+  apt:
+    name: eventlircd
+    state: present
 
-- name: stop, mask and disable lircd.socket, lircd.service, lircmd.service and lircd-uinput.service # (the default lirc configuration conflicts with eventlircd)
+- name: apt | install lirc
+  apt:
+    name: lirc
+    state: present
+
+- name: stop, mask and disable lircd.socket, lircd.service and lircd-uinput.service # (the default lirc configuration conflicts with eventlircd)
   systemd:
     name: '{{ item }}'
     enabled: no
@@ -32,33 +25,20 @@
   with_items:
     - lircd.service
     - lircd.socket
-    - lircmd.service
     - lircd-uinput.service
   ignore_errors: yes
-  tags:
-    - systemd
-
-- name: apt | install eventlircd and lircd2uinput
-  apt:
-    name:
-      - eventlircd
-      - lircd2uinput
-    state: present
-  tags:
-    - packages
 
 - name: configure vdr to read from a lircd-compatible socket
   template:
     src: templates/03-vdr-lirc.conf.j2
     dest: /etc/vdr/conf.d/03-vdr-lirc.conf
   notify: ['Restart VDR']
-  tags:
-    - config
 
-- name: expand template for /etc/rc_maps.cfg
-  template:
-    src: templates/rc_maps.cfg.j2
-    dest: /etc/rc_maps.cfg
-  notify: ['Trigger Udev']
-  tags:
-    - config
+# TODO: upload lircd2uinput package to PPA
+#- name: install lircd2uinput
+#  tag: install
+#  apt:
+#      name: lircd2uinput
+#      state: present
+#  when:
+#      install_eventlircd is defined and install_eventlircd

roles/yavdr-remote/templates/lircd.service.d/lircd2uinput.conf.j2

@@ -1,3 +0,0 @@
-[Service]
-ExecStartPost=/usr/bin/lircd2uinput-add /var/run/lirc/lircd0
-ExecStopPost=/usr/bin/lircd2uinput-remove /var/run/lirc/lircd0

roles/yavdr-remote/templates/rc_maps.cfg.j2

@@ -1,181 +0,0 @@
-{{ ansible_managed | comment }}
-#
-# Keymaps table
-#
-# This table creates an association between a keycode file and a kernel
-# driver. It can be used to automatically override a keycode definition.
-#
-# Although not yet tested, it is mented to be added at udev.
-#
-# To use, you just need to run:
-#	./ir-keytable -a
-#
-# Or, if the remote is not the first device:
-#	./ir-keytable -a -s rc1		# for RC at rc1
-#
-
-# Format:
-#	driver - name of the driver provided via uevent - use * for any driver
-#	table -  RC keymap table, provided via uevent - use * for any table
-#	file - file name. If directory is not specified, it will default to
-#		/etc/rc_keymaps.
-# For example:
-# driver	table				file
-# cx8800	*				./keycodes/rc5_hauppauge_new
-# *		rc-avermedia-m135a-rm-jx	./keycodes/kworld_315u
-# saa7134	rc-avermedia-m135a-rm-jx	./keycodes/keycodes/nec_terratec_cinergy_xs
-# em28xx	*				./keycodes/kworld_315u
-# *		*				./keycodes/rc5_hauppauge_new
-
-# Table to automatically load the rc maps for the bundled IR's provided with the
-# devices supported by the linux kernel
-
-#driver table                    file
-ite-cir     rc-rc6-mce          /lib/udev/rc_keymaps/rc-rc6-mce
-nuvoton-cir rc-rc6-mce          /lib/udev/rc_keymaps/rc-rc6-mce
-serial_ir   rc-rc6-mce          /lib/udev/rc_keymaps/rc-rc6-mce
-mceusb      rc-rc6-mce          /lib/udev/rc_keymaps/HOPLOrc6
-
-# Hauppauge PVR 350
-ir-kbd-i2c  rc-hauppauge	/lib/udev/rc_keymaps/rc-hauppauge
-
-# imon-pad
-imon        rc-imon-mce         /lib/udev/rc_keymaps/rc-imon-mce
-imon        rc-imon-pad         /lib/udev/rc_keymaps/rc-imon-pad
-
-# TT-1500/1501
-budget_ci   rc-tt-1500          /lib/udev/rc_keymaps/rc-tt-1501
-
-
-# Skystarhd2
-mantis_core * /lib/udev/rc_keymaps/skystarhd2
-
-# Medion X10
-ati_remote    rc-medion-x10              /lib/udev/rc_keymaps/rc-medion-x10
-ati_remote    rc-medion-x10-or2x         /lib/udev/rc_keymaps/rc-medion-x10-or2x
-ati_remote    rc-medion-x10-digitainer   /lib/udev/rc_keymaps/rc-medion-x10-digitainer
-
-# other devices (which still mostly need a customized keymap for yaVDR)
-*	rc-adstech-dvb-t-pci     adstech_dvb_t_pci
-*	rc-alink-dtu-m           alink_dtu_m
-*	rc-anysee                anysee
-*	rc-apac-viewcomp         apac_viewcomp
-*	rc-asus-pc39             asus_pc39
-*	rc-asus-ps3-100          asus_ps3_100
-*	rc-ati-tv-wonder-hd-600  ati_tv_wonder_hd_600
-*	rc-ati-x10               ati_x10
-*	rc-avermedia-a16d        avermedia_a16d
-*	rc-avermedia-cardbus     avermedia_cardbus
-*	rc-avermedia-dvbt        avermedia_dvbt
-*	rc-avermedia-m135a       avermedia_m135a
-*	rc-avermedia-m733a-rm-k6 avermedia_m733a_rm_k6
-*	rc-avermedia-rm-ks       avermedia_rm_ks
-*	rc-avermedia             avermedia
-*	rc-avertv-303            avertv_303
-*	rc-azurewave-ad-tu700    azurewave_ad_tu700
-*	rc-behold-columbus       behold_columbus
-*	rc-behold                behold
-*	rc-budget-ci-old         budget_ci_old
-*	rc-cec                   cec
-*	rc-cinergy-1400          cinergy_1400
-*	rc-cinergy               cinergy
-*	rc-delock-61959          delock_61959
-*	rc-dib0700-nec           dib0700_nec
-*	rc-dib0700-rc5           dib0700_rc5
-*	rc-digitalnow-tinytwin   digitalnow_tinytwin
-*	rc-digittrade            digittrade
-*	rc-dm1105-nec            dm1105_nec
-*	rc-dntv-live-dvb-t       dntv_live_dvb_t
-*	rc-dntv-live-dvbt-pro    dntv_live_dvbt_pro
-*	rc-dtt200u               dtt200u
-*	rc-dvbsky                dvbsky
-*	rc-em-terratec           em_terratec
-*	rc-encore-enltv-fm53     encore_enltv_fm53
-*	rc-encore-enltv          encore_enltv
-*	rc-encore-enltv2         encore_enltv2
-*	rc-evga-indtube          evga_indtube
-*	rc-eztv                  eztv
-*	rc-flydvb                flydvb
-*	rc-flyvideo              flyvideo
-*	rc-fusionhdtv-mce        fusionhdtv_mce
-*	rc-gadmei-rm008z         gadmei_rm008z
-*	rc-genius-tvgo-a11mce    genius_tvgo_a11mce
-*	rc-gotview7135           gotview7135
-*       rc-hauppauge             /lib/udev/rc_keymaps/rc-hauppauge
-*       rc-imon-mce              /lib/udev/rc_keymaps/rc-imon-mce
-*       rc-imon-pad              /lib/udev/rc_keymaps/rc-imon-pad
-*	rc-iodata-bctv7e         iodata_bctv7e
-*	rc-it913x-v1             it913x_v1
-*	rc-it913x-v2             it913x_v2
-*	rc-kaiomy                kaiomy
-*	rc-kworld-315u           kworld_315u
-*	rc-kworld-pc150u         kworld_pc150u
-*	rc-kworld-plus-tv-analog kworld_plus_tv_analog
-*	rc-leadtek-y04g0051      leadtek_y04g0051
-*	rc-lme2510               lme2510
-*	rc-manli                 manli
-#*	rc-medion-x10-digitainer medion_x10_digitainer
-#*	rc-medion-x10-or2x       medion_x10_or2x
-#*	rc-medion-x10            medion_x10
-*	rc-msi-digivox-ii        msi_digivox_ii
-*	rc-msi-digivox-iii       msi_digivox_iii
-*	rc-msi-tvanywhere-plus   msi_tvanywhere_plus
-*	rc-msi-tvanywhere        msi_tvanywhere
-*	rc-nebula                nebula
-*	rc-nec-terratec-cinergy-xs nec_terratec_cinergy_xs
-*	rc-norwood               norwood
-*	rc-npgtech               npgtech
-*	rc-pctv-sedna            pctv_sedna
-*	rc-pinnacle-color        pinnacle_color
-*	rc-pinnacle-grey         pinnacle_grey
-*	rc-pinnacle-pctv-hd      pinnacle_pctv_hd
-*	rc-pixelview-002t        pixelview_002t
-*	rc-pixelview-mk12        pixelview_mk12
-*	rc-pixelview-new         pixelview_new
-*	rc-pixelview             pixelview
-*	rc-powercolor-real-angel powercolor_real_angel
-*	rc-proteus-2309          proteus_2309
-*	rc-purpletv              purpletv
-*	rc-pv951                 pv951
-*	rc-rc6-mce               /lib/udev/rc_keymaps/rc-rc6-mce
-*	rc-real-audio-220-32-keys real_audio_220_32_keys
-*	rc-reddo                 reddo
-*	rc-snapstream-firefly    snapstream_firefly
-*	rc-streamzap             streamzap
-*	rc-su3000                su3000
-*	rc-tbs-nec               tbs_nec
-*	rc-technisat-ts35        technisat_ts35
-*	rc-technisat-usb2        technisat_usb2
-*	rc-terratec-cinergy-c-pci terratec_cinergy_c_pci
-*	rc-terratec-cinergy-s2-hd terratec_cinergy_s2_hd
-*	rc-terratec-cinergy-xs   terratec_cinergy_xs
-*	rc-terratec-slim-2       terratec_slim_2
-*	rc-terratec-slim         terratec_slim
-*	rc-tevii-nec             tevii_nec
-*	rc-tivo                  tivo
-*	rc-total-media-in-hand-02 total_media_in_hand_02
-*	rc-total-media-in-hand   total_media_in_hand
-*	rc-trekstor              trekstor
-*       rc-tt-1500          /lib/udev/rc_keymaps/rc-tt-1500
-*	rc-twinhan-dtv-cab-ci    twinhan_dtv_cab_ci
-*	rc-twinhan1027           twinhan_vp1027_dvbs
-*	rc-videomate-k100        videomate_k100
-*	rc-videomate-s350        videomate_s350
-*	rc-videomate-tv-pvr      videomate_tv_pvr
-*	rc-winfast-usbii-deluxe  winfast_usbii_deluxe
-*	rc-winfast               winfast
-# *	*			 a800                 # found in a800.c
-# *	*			 af9005               # found in af9005-remote.c
-# *	*			 cinergyt2            # found in cinergyT2-core.c
-# *	*			 dvico_mce            # found in cxusb.c
-# *	*			 dvico_portable       # found in cxusb.c
-# *	*			 d680_dmb             # found in cxusb.c
-# *	*			 dibusb               # found in dibusb-common.c
-# *	*			 digitv               # found in digitv.c
-# *	*			 megasky              # found in m920x.c
-# *	*			 tvwalkerir-kbd-i2c   # found in m920x.c
-# *	*			 pinnacle310e         # found in m920x.c
-# *	*			 haupp                # found in nova-t-usb2.c
-# *	*			 opera1               # found in opera1.c
-# *	*			 vp702x               # found in vp702x.c
-# *	*			 vp7045               # found in vp7045.c

roles/yavdr-xorg/defaults/main.yml

@@ -1,15 +0,0 @@
-preferred_outputs:
-  - HDMI
-  - DP
-  - DVI
-  - VGA
-  - TV
-preferred_resolutions:
-  - 7680x4320
-  - 3840x2160
-  - 1920x1080
-  - 1280x720
-  - 720x576
-preferred_refreshrates:
-  - 50
-  - 60