Ansible Playbooks for yaVDR 0.7
Inhaltsverzeichnis
- 1. User Stories
- 2. Introduction
- 3. Installing and configuring yaVDR with Ansible
- 4. Playbooks
- 5. Hosts
- 6. Group Variables
- 7. Roles
- 7.1. install-dependencies
- 7.2. nvidia experimental drivers
- 7.3. yavdr-common
- 7.4. collect facts about the system with custom modules
- 7.5. vdr
- 7.6. STARTED yavdr-network
- 7.7. nfs-server
- 7.8. STARTED yavdr-remote
- 7.9. pulseaudio
- 7.10. yavdr-xorg
- 7.11. samba-install
- 7.12. samba-config
- 7.13. STARTED autoinstall-drivers
- 7.14. autoinstall-ubuntu-drivers
- 7.15. autoinstall-virtualbox-guest
- 7.16. autoinstall-atric-usb
- 7.17. autoinstall-yausbir
- 7.18. autoinstall-satip
- 7.19. autoinstall-targavfd
- 7.20. autoinstall-imonlcd
- 7.21. autoinstall-libcecdaemon
- 7.22. autoinstall-pvr350
- 7.23. autoinstall-hauppauge-pvr
- 7.24. autoinstall-firmware
- 7.25. autoinstall-dvbsky-firmware
- 7.26. TODO autoinstall-dvbhddevice
- 7.27. autoinstall-dvbsddevice
- 7.28. autoinstall-hardware-irmp
- 7.29. kodi
- 7.30. dvd
- 7.31. template-test
- 7.32. wakeup
- 7.33. grub-config
- 8. Modules
- 9. Handlers
1 User Stories
1.1 yavdr-full
A User wants to install yaVDR without customization and relies on full automation.
After installing a supported Ubuntu Server version and (if needed) setting up the network connection, the install script is downloaded and started.
The install script adds the ansible PPA, installs ansible and other basic dependencies and runs the automated installation process.
Several roles are used to tie everything together:
- yavdr-common
- installs the basic set of packages needed and preconfigures the system (package sources, package manager settings, entires for network ports, directory structure etc.). Also collects information about the system
- autoinstall-ubuntu-drivers
- uses Ubuntu’s automatic detection for additional drivers (e.g. proprietary nvidia driver, microcode updates, VirtualBox guest additions)
- vdr
- install the vdr package and required plugins
- pulseaudio
- install and preconfigure pulseaudio
- yavdr-network
- configure WOL, add nfs client capabilites, install avahi-linker
- samba-server
- install and preconfigure a samba server
- nfs-server
- install nfs-kernelserver and preconfigure nfs exports (and avahi-announcements)
- autoinstall-satip
- install vdr-plugin-satip if a Sat>IP server has been found
- autoinstall-targavfd
- install vdr-plugin-targavfd if display is connected
- autoinstall-imonlcd
- install vdr-plugin-imonlcd if a matchind display is connected
- yavdr-xorg
- install and configure a systemd user session with a running X-server. A frontend script will manage VDR’s frontend and other applications like KODI. Also choose the best possible output plugin.
- grub-config
- update grub configuration based on executed roles
1.1.1 Using vdr, pulseaudio and xorg together
2 Introduction
One of the major problems we faced with customized Ubuntu ISO files as installation media for prior yaVDR versions has been the limited hardware support and the time consuming process to create and update them. An interesting alternative to this approach is to enable the user to choose the installation medium himself so point releases, kernel versions and additional drivers can be chosen deliberately. After the basic setup is complete (and a working internet connection is available), a fully customizable install script completes the yaVDR installation.
3 Installing and configuring yaVDR with Ansible
This is an experimental feature which allows to set up a yaVDR installation based on a normal Ubuntu Server 16.04.x installation using Ansible.
This Manual is written in org-mode for Emacs and can rewrite the complete ansible configuration if you call org-babel-tangle from within emacs.
To use this playbook on a Ubuntu Server Installation you need to run the following commands:
sudo apt-get install git
git clone https://github.com/yavdr/yavdr-ansible.git
cd yavdr-ansible
git checkout bionic
sudo ./install-yavdr.sh
We use a callback to generate tags for all roles autmatically:
[defaults] callback_plugins = plugins/callbacks callback_whitelist = auto_tags ansible_managed = *** ANSIBLE MANAGED FILE *** template: {file}
3.1 Install script for local usage
if (( $EUID != 0 )); then echo "This script must be run using sudo -H or as root" exit fi apt-get -y install software-properties-common # Add repository for ansible add-apt-repository -y ppa:yavdr/experimental-main # update packages apt-get update # install required packages apt-get -y install --no-install-recommends ansible # TODO: run ansible on local host ansible-playbook yavdr07.yml -b -i 'localhost_inventory' --connection=local --tags="all" --extra-vars "first_run=True"
4 Playbooks
4.1 yavdr07.yml
The yavdr07.yml playbook sets up a fully-featured yaVDR installation:
--- # file: yavdr07.yml # this playbook sets up a complete yaVDR 0.7 installation - name: set up yaVDR hosts: all become: true roles: - yavdr-common # install and configure the basic system - collect-facts # query system facts - autoinstall-ubuntu-drivers # use ubuntu-drivers to install proprietary dirvers # (e.g. nvidia, virtualbox) - autoinstall-virtualbox-guest # - nvidia-experimental # install very recent nvidia dirver from ppa:graphics-drivers/ppa - vdr # install vdr and related packages - yavdr-network # enable network client capabilities - samba-install # install samba server - samba-config # configure samba server - nfs-server # install nfs server - pulseaudio # install pulseaudio - yavdr-xorg # graphical session - yavdr-remote # remote configuration files, services and scripts - autoinstall-satip # install vdr-plugin-satip if a Sat>IP server has been found - autoinstall-targavfd # install vdr-plugin-targavfd if display is connected - autoinstall-imonlcd # install vdr-plugin-imonlcd if a matchind display is connected - autoinstall-pvr350 # install vdr-plugin-pgvr350 if a matching card is detected - autoinstall-hauppauge-pvr # install vdr-plugin-pvrinput if a matching card is found - autoinstall-dvbsddevice # install vdr-plugin-dvbsddevice if a matching card is detected - autoinstall-hardware-irmp # install yavdr-hardware-irmp if a matching usb device is detected - autoinstall-atric-usb # preconfigure lircd for Atric IR-WakeupUSB receiver - autoinstall-yausbir # preconfigure lircd for yaUsbIR receiver - autoinstall-dvbsky-firmware # download an install required firmware files for dvbsky cards - kodi - dvd # set up packages and a udev rule to allow kodi and other players # to play and eject optical media - wakeup # set up wakeup methods for rtc etc. - grub-config # configure grub handlers: - import_tasks: handlers/main.yml
4.2 yavdr07-headless.yml
For a headless server installation yavdr07-headless.yml is a good choice
--- # file: yavdr07-headless.yml # this playbook set up a headless yaVDR 0.7 installation - name: set up a headless yaVDR server hosts: all become: true roles: - yavdr-common - collect-facts # query system facts - vdr - yavdr-network - samba-server - samba-config - nfs-server - grub-config - autoinstall-satip - wakeup tags: - always handlers: - import_tasks: handlers/main.yml
5 Hosts
This playbook can either be used to run the installation on the localhost or any other PC in the network that can be accessed via ssh. Simply add the host names or IP addresses to the hosts file in the respective section:
[local] localhost connection=local
6 Group Variables
6.1 PPAs
--- # file: group_vars/all branch: experimental ppa_owner: 'ppa:yavdr' # add the following PPAs repositories: - '{{ ppa_owner }}/{{branch}}-main' - '{{ ppa_owner }}/{{branch}}-vdr' #- '{{ ppa_owner }}/{{branch}}-yavdr' #- '{{ ppa_owner }}/{{branch}}-kodi'
6.2 VDR user, directories, special configuration and plugins
# properties of the user vdr and vdr-related options vdr: user: vdr group: vdr uid: 666 gid: 666 home: /var/lib/vdr confdir: /var/lib/vdr recdir: /srv/vdr/video hide_first_recording_level: false safe_dirnames: true # escape characters (useful for windows clients and FAT/NTFS file systems) override_vdr_charset: false # add the vdr plugins you want to install vdr_plugins: - vdr-plugin-devstatus - vdr-plugin-markad - vdr-plugin-restfulapi - vdr-plugin-softhddevice-vpp
6.3 Media directories
# dictionary of directories for (shared) files. Automatically exported via NFS and Samba if those roles are enabled media_dirs: audio: /srv/audio video: /srv/video pictures: /srv/picture files: /srv/files backups: /srv/backups recordings: '{{ vdr.recdir }}'
6.4 NFS
nfs: insecure: false # set to true for OS X clients or if you plan to use libnfs as unprivileged user (e.g. KODI)
6.5 Samba
samba: workgroup: YAVDR windows_compatible: '{{ vdr.safe_dirnames }}' # set to true to disable unix extensions, enable follow symlinks and wide links
6.6 Additional packages
# additional packages you want to install extra_packages: - bpython - bpython3 - htop - tree - vim - w-scan - plymouth-theme-yavdr-logo
6.7 System pre-configuration
frontend: vdr #system: # shutdown: poweroff wakeup_method: acpiwakeup grub: timeout: 0 boot_options: quiet splash
7 Roles
7.1 install-dependencies
7.2 nvidia experimental drivers
install nvidia-387 from ppa:graphics-drivers/ppa
7.2.1 tasks
- main.yml
--- - name: add ppa:graphics-drivers/ppa apt_repository: repo: 'ppa:graphics-drivers/ppa' state: present update_cache: yes tags: - ppa - name: install nvidia-387 and other required packages apt: name: '{{ item }}' state: present install_recommends: no with_items: - nvidia-390 - nvidia-settings tags: - packages
7.3 yavdr-common
This role is used to set up a basic yaVDR installation. It creates the directories, installs the vdr and other useful packages.
7.3.1 default variables
This section is for reference only, please use the files in global_vars for customizations.
--- # file: roles/yavdr-common/defaults/main.yml
- Repositories
You can set a list of package repositories which provide the necessary packages. Feel free to use own PPAs if you need special customization to the VDR and it’s plugins.
branch: unstable repositories: - 'ppa:yavdr/main' - 'ppa:yavdr/unstable-main' - 'ppa:yavdr/{{branch}}-vdr' - 'ppa:yavdr/{{branch}}-kodi' - 'ppa:yavdr/{{branch}}-yavdr'
- Drivers
Automatically installed drivers can be very useful, but if you know you need a certain driver, you can simply set it’s value to true. If you don’t want a driver to be installed, set it’s value to false.
drivers: sundtek: auto ddvb-dkms: auto
- Additional Packages
Add additional packages you would like to have on your installation to this list
extra_packages: - vim - tree - w-scan - VDR
This section allows you to set the recording directory, the user and group that runs the vdr and it’s home directory.
- user
- the vdr user name
- group
- the main group for the user vdr
- uid
- the user id for the user vdr
- gid
- the group id for the group vdr
- home
- the home directory for the user vdr
- recdir
- the recording directory used by VDR
- hide_first_recording_level
- let vdr hide the first directory level of it’s recording directory so the content of multiple directories is shown merged together
- safe_dirnames
- replace special characters which are not compatible with Windows file systems and Samba shares
- override_vdr_charset
- workaround for channels with weird EPG encodings, e.g. Sky
vdr: user: vdr group: vdr uid: 666 gid: 666 home: /var/lib/vdr recdir: /srv/vdr/video hide_first_recording_level: false safe_dirnames: true override_vdr_charset: false
7.3.2 tasks
yavdr-common executes the following tasks:
- main.yml
--- # file: roles/yavdr-common/tasks/main.yml - name: basic installation block: - import_tasks: configure_apt.yml - import_tasks: configure_system.yml - import_tasks: create_directories.yml tags: [install]
- Disable default installation of recommended packages
This task prevents apt to automatically install all recommended dependencies for packages:
--- - name: apt | prevent automatic installation of recommended packages template: src: templates/90-norecommends.j2 dest: /etc/apt/apt.conf.d/90norecommends
- Set up package repositories
- name: add PPAs apt_repository: repo: '{{ item }}' state: present update_cache: yes with_items: '{{ repositories }}' tags: - ppa - name: run apt-get dist-upgrade apt: upgrade: dist update_cache: yes
- Use bash instead of dash
- name: use bash instead of dash shell: | echo "set dash/sh false" | debconf-communicate dpkg-reconfigure -f noninteractive dash
- create user vdr
- Disable release-upgrade notifications
- SOMEDAY move from lineinfile to template
- name: disable release-upgrade notifications lineinfile: dest: /etc/update-manager/release-upgrades backrefs: yes state: present regexp: '^(Prompt=).*$' line: '\1never' ignore_errors: yes with_first_found: - files: - /etc/update-manager/release-upgrades skip: true
- SOMEDAY move from lineinfile to template
- Install essential packages
- name: apt | install basic packages apt: name: '{{ item }}' state: present install_recommends: no with_items: - anacron - acl - at - bash-completion #- biosdevname # caution: may change device names after a minimal installation! - debconf-utils - linux-firmware - psmisc - python-kmodpy - python-requests - python-usb - python3-usb - software-properties-common - ssh - wget - wpasupplicant - usbutils - xfsprogs
- Install additional packages (user defined)
- name: apt | install extra packages apt: name: '{{ item }}' state: present install_recommends: no with_items: '{{ extra_packages }}'
- create directories
- Disable default installation of recommended packages
7.3.3 templates
{{ ansible_managed | comment('c') }}
// Recommends are as of now still abused in many packages
APT::Install-Recommends "0";
APT::Install-Suggests "0";
7.4 collect facts about the system with custom modules
7.4.1 variables
first_run: False
7.4.2 tasks
- main.yml
- name: get information about usb and pci hardware and loaded kernel modules hardware_facts: usb: True pci: True modules: True gpus: True acpi_power_modes: True tags: - always - debug: var: '{{ item }}' verbosity: 1 with_items: - usb - pci - gpus - modules - acpi_power_modes - nvidia_detected - intel_detected - amd_detected - virtualbox_detected - name: known vdr output plugins set_fact: vdr_output_plugins: - softhddevice - xineliboutput - xine
7.5 vdr
7.5.1 tasks
- install the basic vdr packages
--- # file: roles/vdr/tasks/main.yml - name: apt | install basic vdr packages apt: name: '{{ item }}' state: present install_recommends: no with_items: - vdr - vdrctl - vdr-plugin-dbus2vdr
- Add svdrp/svdrp-disc to /etc/services
- name: add svdrp and svdrp-disc to /etc/services lineinfile: dest: /etc/services state: present line: "{{ item }}" with_items: - "svdrp 6419/tcp" - "svdrp-disc 6419/udp"
- Set up the recording directory for the vdr user
- name: create vdr recdir file: state: directory owner: '{{ vdr.user }}' group: '{{ vdr.group }}' mode: 0775 dest: '{{ vdr.recdir }}' - name: set option to use hide-first-recording-level patch blockinfile: dest: /etc/vdr/conf.d/04-vdr-hide-first-recordinglevel.conf create: true state: "{{ 'present' if vdr.hide_first_recording_level else 'absent' }}" block: | [vdr] --hide-first-recording-level - name: create local dir in recdir file: state: directory owner: '{{ vdr.user }}' group: '{{ vdr.group }}' mode: '0775' dest: '{{ vdr.recdir }}/local' when: vdr.hide_first_recording_level # TODO: set recdir, user etc. in /etc/vdr/conf.d/
- Install additional vdr plugins
The additional plugins to install can be set in the variable
{{vdr_plugins}}in the group variables- name: apt | install additional vdr plugins apt: name: '{{ item }}' state: present install_recommends: no with_items: '{{ vdr_plugins | default({}) }}' notify: [ 'Restart VDR' ]
- copy vdr configuration files (if they don’t exist yet)
- name: ensure vdr is stopped systemd: name: vdr.service state: stopped notify: [ 'Start VDR' ] - name: "vdr configuration | copy remote.conf if it doesn't exist yet" copy: src: files/remote.conf dest: '{{ vdr.confdir }}/remote.conf' owner: '{{ vdr.user }}' group: '{{ vdr.group }}' mode: 0644 force: no - name: "vdr configuration | copy keymacros.conf if it doesn't exist yet" copy: src: files/keymacros.conf dest: '{{ vdr.confdir }}/keymacros.conf' owner: '{{ vdr.user }}' group: '{{ vdr.group }}' mode: 0644 force: no
7.5.2 templates
7.5.3 files
- remote.conf
LIRC.Up KEY_UP LIRC.Down KEY_DOWN LIRC.Menu KEY_MENU LIRC.Ok KEY_OK LIRC.Back KEY_ESC LIRC.Left KEY_LEFT LIRC.Right KEY_RIGHT LIRC.Red KEY_RED LIRC.Green KEY_GREEN LIRC.Yellow KEY_YELLOW LIRC.Blue KEY_BLUE LIRC.0 KEY_0 LIRC.1 KEY_1 LIRC.2 KEY_2 LIRC.3 KEY_3 LIRC.4 KEY_4 LIRC.5 KEY_5 LIRC.6 KEY_6 LIRC.7 KEY_7 LIRC.8 KEY_8 LIRC.9 KEY_9 LIRC.Info KEY_INFO LIRC.Play KEY_PLAY LIRC.Pause KEY_PAUSE LIRC.Play/Pause KEY_PLAYPAUSE LIRC.Stop KEY_STOP LIRC.Record KEY_RECORD LIRC.FastFwd KEY_FASTFORWARD LIRC.FastRew KEY_REWIND LIRC.Next KEY_NEXT LIRC.Prev KEY_BACK LIRC.Power KEY_POWER2 LIRC.Channel+ KEY_CHANNELUP LIRC.Channel- KEY_CHANNELDOWN LIRC.PrevChannel KEY_PREVIOUS LIRC.Volume+ KEY_VOLUMEUP LIRC.Volume- KEY_VOLUMEDOWN LIRC.Mute KEY_MUTE LIRC.Subtitles KEY_SUBTITLE LIRC.Schedule KEY_EPG LIRC.Channels KEY_CHANNEL LIRC.Commands KEY_FAVORITES LIRC.Audio KEY_MODE LIRC.Timers KEY_TIME LIRC.Recordings KEY_PVR LIRC.Setup KEY_SETUP LIRC.User0 KEY_TEXT LIRC.User1 KEY_PROG1 LIRC.User2 KEY_PROG2 LIRC.User3 KEY_PROG3 LIRC.User4 KEY_PROG4 LIRC.User5 KEY_AUDIO LIRC.User6 KEY_VIDEO LIRC.User7 KEY_IMAGES LIRC.User8 KEY_FN LIRC.User9 KEY_SCREEN XKeySym.Up Up XKeySym.Down Down XKeySym.Menu Home XKeySym.Menu Tab XKeySym.Menu KP_Home XKeySym.Ok Return XKeySym.Ok KP_Enter XKeySym.Back BackSpace XKeySym.Back KP_Separator XKeySym.Left Left XKeySym.Right Right XKeySym.Up KP_Up XKeySym.Down KP_Down XKeySym.Left KP_Left XKeySym.Right KP_Right XKeySym.Red F1 XKeySym.Green F2 XKeySym.Yellow F3 XKeySym.Blue F4 XKeySym.0 0 XKeySym.1 1 XKeySym.2 2 XKeySym.3 3 XKeySym.4 4 XKeySym.5 5 XKeySym.6 6 XKeySym.7 7 XKeySym.8 8 XKeySym.9 9 XKeySym.0 KP_0 XKeySym.1 KP_1 XKeySym.2 KP_2 XKeySym.3 KP_3 XKeySym.4 KP_4 XKeySym.5 KP_5 XKeySym.6 KP_6 XKeySym.7 KP_7 XKeySym.8 KP_8 XKeySym.9 KP_9 XKeySym.Info End XKeySym.Info KP_End XKeySym.Pause F9 XKeySym.FastFwd F6 XKeySym.FastRew F5 XKeySym.Power Pause XKeySym.Volume+ F12 XKeySym.Volume- F11 XKeySym.Volume+ KP_Add XKeySym.Volume- KP_Subtract XKeySym.Mute F10 XKeySym.User1 F5 XKeySym.User2 F6 XKeySym.User3 F7 XKeySym.User4 F8 XKeySym.User5 Print XKeySym.User6 Scroll_Lock XKeySym.User7 Insert XKeySym.User8 KP_Divide XKeySym.User9 KP_Multiply XKeySym.Audio Menu XKeySym.Channel+ Prior XKeySym.Channel- Next XKeySym.Channel+ KP_Prior XKeySym.Channel- KP_Next XKeySym.Volume+ XF86AudioRaiseVolume XKeySym.Volume- XF86AudioLowerVolume XKeySym.Mute XF86AudioMute XKeySym.Stop XF86AudioStop XKeySym.Play/Pause XF86AudioPlay XKeySym.Prev XF86AudioPrev XKeySym.Next XF86AudioNext
- keymacros.conf
# Remote control key macros for VDR # # Format: # # macrokey key1 key2 key3... # macrokey @plugin key1 key2 key3... # # See man vdr(5) Red Recordings Green Schedule Yellow Info Blue Timers User0 @osdteletext
7.6 STARTED yavdr-network
7.6.1 default variables
install_avahi: true
7.6.2 tasks
--- # this playbook sets up network services for a yaVDR installation - name: apt | install packages for network services apt: name: '{{ item }}' state: present install_recommends: no with_items: - avahi-daemon - avahi-utils #- biosdevname # caution: this may change device names after a minimal installation! - ethtool - nfs-common - vdr-addon-avahi-linker - wakeonlan # Does this really work? We need a way to check if an interface supports WOL - Python Skript? # - name: check WOL capabilities of network interfaces # shell: 'ethtool {{ item }} | grep -Po "(?<=Supports\sWake-on:\s).*$"' # register: wol # with_items: '{% for interface in ansible_interfaces if interface != 'lo' and interface != 'bond0' %}' - name: restart autofs if running systemd: name: autofs state: restarted enabled: yes masked: no - name: ensure autofs is running systemd: name: autofs state: started enabled: yes masked: no - name: restart avahi-linker if running systemd: name: avahi-linker state: restarted enabled: yes masked: no - name: start avahi-linker systemd: name: avahi-linker state: started enabled: yes masked: no - name: enable and start additional services for avahi-linker systemd: name: '{{ item }}' state: started enabled: yes masked: no with_items: - vdr-net-monitor - vdr-update-monitor - prevent-umount-on-pause
7.7 nfs-server
7.7.1 TODO avahi-services für NFS beim Stoppen des nfs-kernel-servers depublizieren, beim Start wieder announcen
7.7.2 tasks
--- - name: install nfs server packages apt: name: '{{ item }}' state: present install_recommends: no with_items: - nfs-kernel-server - nfs-common - name: create /etc/exports template: src: templates/nfs-exports.j2 dest: /etc/exports notify: [ 'Restart NFS Kernel Server' ] - name: populate /etc/avahi/services template: src: templates/avahi/service.j2 dest: '/etc/avahi/services/yavdr-{{ item.key }}.service' with_dict: '{{ media_dirs }}'
7.7.3 templates
- /etc/exports
/srv *(rw,fsid=0,sync,no_subtree_check,all_squash,anongid={{ vdr.gid }},anonuid={{ vdr.uid }}) {% for name, path in media_dirs.iteritems() %} {{ path }} *(rw,fsid={{ loop.index }},sync,no_subtree_check,all_squash,anongid={{ vdr.gid }},anonuid={{ vdr.uid }}{{ ',insecure' if nfs.insecure else '' }}) {% endfor %}
- avahi services
<?xml version="1.0" standalone='no'?> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">{{ item.key|capitalize }} on %h</name> ## Name <service> <type>_nfs._tcp</type> <port>2049</port> <txt-record>path={{ item.value }}</txt-record> ## path to shared Folder <txt-record>subtype={{ 'vdr' if item.key == 'recordings' else item.key }}</txt-record> ## subtype </service> </service-group>
7.8 STARTED yavdr-remote
7.8.1 default variables
lircd0_socket: /var/run/lirc/lircd0
7.8.2 tasks
--- # This role is used to set up the yaVDR remote control configuration. - name: apt | install packages for remote support apt: name: '{{ item }}' state: present with_items: - yavdr-remote - lirc - eventlircd - lircd2uinput tags: - packages - name: add systemd drop-in for lircd to use lircd2uinput block: - name: create directory /etc/systemd/system/lircd.service.d/ file: path: /etc/systemd/system/lircd.service.d/ state: directory - name: expand template for /etc/systemd/system/lircd.service.d/lircd2uinput.conf template: src: templates/lircd.service.d/lircd2uinput.conf.j2 dest: /etc/systemd/system/lircd.service.d/lircd2uinput.conf tags: - config - name: stop, mask and disable lircd.socket, lircd.service, lircmd.service and lircd-uinput.service # (the default lirc configuration conflicts with eventlircd) systemd: name: '{{ item }}' enabled: no state: stopped masked: yes with_items: - lircd.service - lircd.socket - lircmd.service - lircd-uinput.service ignore_errors: yes tags: - systemd - name: configure vdr to read from a lircd-compatible socket template: src: templates/03-vdr-lirc.conf.j2 dest: /etc/vdr/conf.d/03-vdr-lirc.conf notify: ['Restart VDR'] tags: - config - name: expand template for /etc/rc_maps.cfg template: src: templates/rc_maps.cfg.j2 dest: /etc/rc_maps.cfg notify: ['Trigger Udev'] tags: - config
7.8.3 templates
- Systemd Drop-in to start vdr with lirc support
{% if frontend != 'kodi' %} [vdr] --lirc=/var/run/lirc/lircd {% endif %}
- Systemd Drop-in to start lircd2uinput with lircd
[Service] ExecStartPost=/usr/bin/lircd2uinput-add /var/run/lirc/lircd0 ExecStopPost=/usr/bin/lircd2uinput-remove /var/run/lirc/lircd0
- create /etc/rc_maps.cfg
# # Keymaps table # # This table creates an association between a keycode file and a kernel # driver. It can be used to automatically override a keycode definition. # # Although not yet tested, it is mented to be added at udev. # # To use, you just need to run: # ./ir-keytable -a # # Or, if the remote is not the first device: # ./ir-keytable -a -s rc1 # for RC at rc1 # # Format: # driver - name of the driver provided via uevent - use * for any driver # table - RC keymap table, provided via uevent - use * for any table # file - file name. If directory is not specified, it will default to # /etc/rc_keymaps. # For example: # driver table file # cx8800 * ./keycodes/rc5_hauppauge_new # * rc-avermedia-m135a-rm-jx ./keycodes/kworld_315u # saa7134 rc-avermedia-m135a-rm-jx ./keycodes/keycodes/nec_terratec_cinergy_xs # em28xx * ./keycodes/kworld_315u # * * ./keycodes/rc5_hauppauge_new # Table to automatically load the rc maps for the bundled IR's provided with the # devices supported by the linux kernel #driver table file * rc-adstech-dvb-t-pci adstech_dvb_t_pci * rc-alink-dtu-m alink_dtu_m * rc-anysee anysee * rc-apac-viewcomp apac_viewcomp * rc-asus-pc39 asus_pc39 * rc-asus-ps3-100 asus_ps3_100 * rc-ati-tv-wonder-hd-600 ati_tv_wonder_hd_600 * rc-ati-x10 ati_x10 * rc-avermedia-a16d avermedia_a16d * rc-avermedia-cardbus avermedia_cardbus * rc-avermedia-dvbt avermedia_dvbt * rc-avermedia-m135a avermedia_m135a * rc-avermedia-m733a-rm-k6 avermedia_m733a_rm_k6 * rc-avermedia-rm-ks avermedia_rm_ks * rc-avermedia avermedia * rc-avertv-303 avertv_303 * rc-azurewave-ad-tu700 azurewave_ad_tu700 * rc-behold-columbus behold_columbus * rc-behold behold * rc-budget-ci-old budget_ci_old * rc-cec cec * rc-cinergy-1400 cinergy_1400 * rc-cinergy cinergy * rc-delock-61959 delock_61959 * rc-dib0700-nec dib0700_nec * rc-dib0700-rc5 dib0700_rc5 * rc-digitalnow-tinytwin digitalnow_tinytwin * rc-digittrade digittrade * rc-dm1105-nec dm1105_nec * rc-dntv-live-dvb-t dntv_live_dvb_t * rc-dntv-live-dvbt-pro dntv_live_dvbt_pro * rc-dtt200u dtt200u * rc-dvbsky dvbsky * rc-em-terratec em_terratec * rc-encore-enltv-fm53 encore_enltv_fm53 * rc-encore-enltv encore_enltv * rc-encore-enltv2 encore_enltv2 * rc-evga-indtube evga_indtube * rc-eztv eztv * rc-flydvb flydvb * rc-flyvideo flyvideo * rc-fusionhdtv-mce fusionhdtv_mce * rc-gadmei-rm008z gadmei_rm008z * rc-genius-tvgo-a11mce genius_tvgo_a11mce * rc-gotview7135 gotview7135 * rc-hauppauge hauppauge #* rc-imon-mce imon_mce #* rc-imon-pad imon_pad * rc-iodata-bctv7e iodata_bctv7e * rc-it913x-v1 it913x_v1 * rc-it913x-v2 it913x_v2 * rc-kaiomy kaiomy * rc-kworld-315u kworld_315u * rc-kworld-pc150u kworld_pc150u * rc-kworld-plus-tv-analog kworld_plus_tv_analog * rc-leadtek-y04g0051 leadtek_y04g0051 * rc-lme2510 lme2510 * rc-manli manli * rc-medion-x10-digitainer medion_x10_digitainer * rc-medion-x10-or2x medion_x10_or2x * rc-medion-x10 medion_x10 * rc-msi-digivox-ii msi_digivox_ii * rc-msi-digivox-iii msi_digivox_iii * rc-msi-tvanywhere-plus msi_tvanywhere_plus * rc-msi-tvanywhere msi_tvanywhere * rc-nebula nebula * rc-nec-terratec-cinergy-xs nec_terratec_cinergy_xs * rc-norwood norwood * rc-npgtech npgtech * rc-pctv-sedna pctv_sedna * rc-pinnacle-color pinnacle_color * rc-pinnacle-grey pinnacle_grey * rc-pinnacle-pctv-hd pinnacle_pctv_hd * rc-pixelview-002t pixelview_002t * rc-pixelview-mk12 pixelview_mk12 * rc-pixelview-new pixelview_new * rc-pixelview pixelview * rc-powercolor-real-angel powercolor_real_angel * rc-proteus-2309 proteus_2309 * rc-purpletv purpletv * rc-pv951 pv951 * rc-real-audio-220-32-keys real_audio_220_32_keys * rc-reddo reddo * rc-snapstream-firefly snapstream_firefly * rc-streamzap streamzap * rc-su3000 su3000 * rc-tbs-nec tbs_nec * rc-technisat-ts35 technisat_ts35 * rc-technisat-usb2 technisat_usb2 * rc-terratec-cinergy-c-pci terratec_cinergy_c_pci * rc-terratec-cinergy-s2-hd terratec_cinergy_s2_hd * rc-terratec-cinergy-xs terratec_cinergy_xs * rc-terratec-slim-2 terratec_slim_2 * rc-terratec-slim terratec_slim * rc-tevii-nec tevii_nec * rc-tivo tivo * rc-total-media-in-hand-02 total_media_in_hand_02 * rc-total-media-in-hand total_media_in_hand * rc-trekstor trekstor * rc-tt-1500 tt_1500 * rc-twinhan-dtv-cab-ci twinhan_dtv_cab_ci * rc-twinhan1027 twinhan_vp1027_dvbs * rc-videomate-k100 videomate_k100 * rc-videomate-s350 videomate_s350 * rc-videomate-tv-pvr videomate_tv_pvr * rc-winfast-usbii-deluxe winfast_usbii_deluxe * rc-winfast winfast # * * a800 # found in a800.c # * * af9005 # found in af9005-remote.c # * * cinergyt2 # found in cinergyT2-core.c # * * dvico_mce # found in cxusb.c # * * dvico_portable # found in cxusb.c # * * d680_dmb # found in cxusb.c # * * dibusb # found in dibusb-common.c # * * digitv # found in digitv.c # * * megasky # found in m920x.c # * * tvwalkerir-kbd-i2c rc-hauppauge /lib/udev/rc_keymaps/rc-hauppaugetwin # found in m920x.c # * * pinnacle310e # found in m920x.c # * * haupp # found in nova-t-usb2.c # * * opera1 # found in opera1.c # * * vp702x # found in vp702x.c # * * vp7045 # found in vp7045.c # Hauppauge PVR 350 ir-kbd-i2c rc-hauppauge /lib/udev/rc_keymaps/rc-hauppauge # imon-pad imon rc-imon-pad /lib/udev/rc_keymaps/rc-imon-pad imon rc-imon-mce /lib/udev/rc_keymaps/rc-imon-mce # TT-1500/1501 * rc-tt-1500 /lib/udev/rc_keymaps/rc-tt-1500 budget_ci rc-tt-1500 /lib/udev/rc_keymaps/rc-tt-1501 # rc-rc6-mce * rc-rc6-mce /lib/udev/rc_keymaps/rc-rc6-mce # CIR ite-cir rc-rc6-mce /lib/udev/rc_keymaps/rc-rc6-mce nuvoton-cir rc-rc6-mce /lib/udev/rc_keymaps/rc-rc6-mce # mceusb mceusb rc-rc6-mce /lib/udev/rc_keymaps/HOPLOrc6 # Skystarhd2 mantis_core * /lib/udev/rc_keymaps/skystarhd2 # Medion X10 ati_remote rc-medion-x10 /lib/udev/rc_keymaps/rc-medion-x10 ati_remote rc-medion-x10-or2x /lib/udev/rc_keymaps/rc-medion-x10-or2x ati_remote rc-medion-x10-digitainer /lib/udev/rc_keymaps/rc-medion-x10-digitainer
7.8.4 files
7.9 pulseaudio
7.9.1 tasks
--- - name: apt | install pulseaudio, pavucontrol and vdr-plugin-pulsecontrol apt: name: '{{ item }}' state: present install_recommends: no with_items: - pulseaudio - pavucontrol - vdr-plugin-pulsecontrol - name: create /etc/asound.conf with pulseaudio as default device template: src: templates/alsa/asound.conf.j2 dest: /etc/asound.conf
7.9.2 templates
# Use PulseAudio by default pcm.!default { type pulse fallback "sysdefault" hint { show on description "Default ALSA Output (currently PulseAudio Sound Server)" } } ctl.!default { type pulse fallback "sysdefault" }
7.10 yavdr-xorg
7.10.1 About the GUI session
The X-Server is started by using the two systemd units xlogin@.service and x@.service provided by the package xlogin. The former is enabled (and started) for the vdr user - which results (using the default settings for the user vdr with the uid 666) in the activation of xlogin@vdr.service when reaching the graphical.target.
x@vt7.service is started automatically as a dependency of xlogin@vdr.service and starts the X-server. xlogin@vdr.service also starts a systemd user session using user@666.service.
In order to use the keyboard layout configured during installation for the X-Server the script write-x11-keyboard-config reads the keyboard configuration from /etc/default/keyboard when starting x@.service and writes the file /etc/X11/xorg.conf.d/00-keyboard.conf (because systemd for Ubuntu (and Debian) has been patched not to create /etc/X11/xorg.conf.d/00-keyboard.conf according to the localectl settings).
To prevent stopping the X-server when vdr is running, additional dependencies are set up - see the drop-in rules created in /etc/systemd/system/vdr.service.d/.
Basic Services like the session DBus, pulseaudio etc. are started for the default.target of the session.
The openbox autostart script is used to update the systemd session with the needed session variables. It creates a file ~/.session-env which is used as an environment file by vdr.service (so the vdr knows the DISPLAY and can access pulseaudio).
The autostart script then enables all services to be pulled in by yavdr-desktop.target. As the last step yavdr-desktop.target is startet, which results in staring yavdr-frontend.service and additional Units for a second display (openbox and a browser for osd2eb, if available).
In order to achive a clean shutdown of the session, x@t7.service is set as a dependency of the systemd unit instance user@666.service and all processes within the session must be shutdown properly when stopping xlogin@vdr.service. If systemd units are used within the user session, they must stop their process(es) successfully (you should set them up to accept expected exit codes appropriately). The window manager openbox is started using the ~/.xinitrc and stopped using the systemd unit exit-wm.service (which runs on stopping the jobs pulled in by the default.target of the session).
7.10.2 default variables
first_run: False
7.10.3 tasks
- main.yml
--- # file: roles/yavdr-xorg/tasks/main.yml - import_tasks: setup-xorg.yml tags: [install,update] - import_tasks: detect-xorg.yml tags: [xorg.detect,install] - import_tasks: desktop-session.yml tags: [install,update]
- setup-xorg.yml
--- # file: roles/yavdr-xorg/tasks/setup-xorg.yml - name: create directories for systemd drop-in files file: dest: '{{ item }}' state: directory with_items: - "/etc/systemd/system/x@.service.d/" - "/etc/systemd/system/vdr.service.d/" - "/etc/systemd/system/user@{{ vdr.uid }}.service.d/" - "/etc/X11/xorg.conf.d/" - name: systemd-drop-in | add dependency to X-server for vdr.service template: src: templates/vdr-xorg.conf dest: /etc/systemd/system/vdr.service.d/vdr-xorg.conf - name: systemd-drop-in | start x@.service before xlogin@.service template: src: templates/x@service.d/xlogin.conf.j2 dest: /etc/systemd/system/x@.service.d/xlogin.conf - name: systemd-drop-in | load environment file for vdr.service template: src: templates/systemd/vdr-environ.j2 dest: /etc/systemd/system/vdr.service.d/load-environ.conf - name: systemd-drop-in | start vdr.service after network-online.target template: src: templates/systemd/network-online.j2 dest: /etc/systemd/system/vdr.service.d/network-online.conf - name: systemd-drop-in | user@{{ vdr.uid }}.service depends on x@vt7.service template: src: templates/user@666.service.d/x-dependency.conf.j2 dest: '/etc/systemd/system/user@{{ vdr.uid }}.service.d/x-dependency.conf' - name: vdr-config | start softhddevice detached and set audio to pulseaudio lineinfile: path: /etc/vdr/conf.avail/softhddevice.conf line: '{{ item }}' with_items: - '-D' # - '-a pulse' # do we need this with our existing asound.conf? - name: add a login shell for the user vdr user: name: '{{ vdr.user }}' shell: '/bin/bash' state: present uid: '{{ vdr.uid }}' groups: '{{ vdr.group }}' append: yes - name: apt | install packages for xorg apt: name: '{{ item }}' state: present with_items: - xlogin - xorg - xserver-xorg-input-all - xserver-xorg-video-all - openbox - python3-dbus2vdr - python3-yavdrfrontend - read-edid - tmux - vdr-plugin-desktop - vdr-plugin-osd2web - feh #- yavdr-xorg - name: download yavdr logo block: - file: dest: '/usr/share/yavdr/images' state: directory - get_url: url: 'https://github.com/yavdr/yavdr-base/raw/master/images/yavdr_logo.png' dest: '/usr/share/yavdr/images/yavdr_logo.png' - name: command | write keyboard configuration to /etc/X11/xorg.conf.d/00-keyboard.conf command: write-x11-keyboard-config args: creates: /etc/X11/xorg.conf.d/00-keyboard.conf # NOTE: write-x11-keyboard-config is in the xlogin package # Ubuntu's systemd is patched, so it does not create the file automatically - name: apt | install desktop programs apt: name: '{{ item }}' state: present with_items: - xterm - firefox - kiosk-browser
- detect-xorg.yml
--- # file: roles/yavdr-xorg/tasks/detect-xorg.yml - name: "expand template for x-verbose@.service" template: src: "templates/systemd/system/x-verbose@.service.j2" dest: "/etc/systemd/system/x-verbose@.service" - name: "expand template for xorg-verbose.conf" template: src: "templates/xorg-verbose.conf.j2" dest: "/etc/X11/xorg-verbose.conf" - name: Stop VDR systemd: name: vdr.service state: stopped enabled: yes notify: ['Start VDR'] - name: Stop xlogin systemd: name: 'xlogin@{{ vdr.user }}.service' state: stopped notify: ['Start xlogin'] - name: Stop x systemd: name: x@vt7.service state: stopped - name: Workaround for wrong connector names on first run block: - name: "wait a little bit before starting x-verbose@vt7.service (needed?)" wait_for: timeout: 10 - name: "start x-verbose@.service" systemd: name: "x-verbose@vt7.service" state: started enabled: false masked: false daemon_reload: true - name: "wait a little bit, so X has some time to start up (needed?)" wait_for: timeout: 3 - name: "stop x-verbose@vt7.service" systemd: name: "x-verbose@vt7.service" state: stopped enabled: false masked: true when: first_run - name: "wait a little bit, so X has some time to shut down (needed?)" wait_for: timeout: 3 - name: "trigger udevadm reload" command: 'udevadm trigger ' - name: "wait a little bit, so udev has some time to reapply rules (needed?)" wait_for: timeout: 3 - name: "start x-verbose@.service" systemd: name: "x-verbose@vt7.service" state: started enabled: false masked: false daemon_reload: true - name: "wait a little bit, so X has some time to start up (needed?)" wait_for: timeout: 3 - name: "detect xorg configuration" action: xrandr_facts - debug: var: xorg.primary - debug: var: xorg.secondary when: xorg.secondary is defined - name: "stop x-verbose@vt7.service" systemd: name: "x-verbose@vt7.service" state: stopped enabled: false masked: true - name: "wait a little bit, so X has some time to shut down (needed?)" wait_for: timeout: 3 - name: save results block: - name: ensure facts.d directory exists file: state: directory path: /etc/ansible/facts.d - name: write xorg variable as local fact copy: content: '{{ {"xorg": xorg} | to_nice_json }}' dest: /etc/ansible/facts.d/xorg.fact - name: write xrandr variable as local fact copy: content: '{{ {"xrandr": xrandr} | to_nice_json }}' dest: /etc/ansible/facts.d/xrandr.fact when: - xrandr is defined - xorg is defined - name: update xorg and xrandr variable with values from local facts if needed set_fact: xorg: '{{ ansible_local.xorg }}' xrandr: '{{ ansible_local.xrandr }}' when: - xrandr is undefined - xorg is undefined # TODO: expand template for xorg.conf (or snippets) # with respect for the available graphics card driver # nvidia, noveau, intel, radeon - name: nvidia related config block: - name: create xorg.conf (for nvidia driver) template: src: templates/xorg.conf.j2 dest: /etc/X11/xorg.conf backup: yes when: - nvidia_detected
- desktop-session.yml
--- # file: roles/yavdr-xorg/tasks/desktop-session.yml - name: create folders for user configuration files file: state: directory dest: '{{ item }}' mode: '0775' owner: '{{ vdr.user }}' group: '{{ vdr.group }}' with_items: - '{{ vdr.home }}/.config/systemd/user' - '{{ vdr.home }}/.config/openbox' - '{{ vdr.home }}/.config/pulse' - name: expand template for .xinitrc for vdr user template: src: 'templates/.xinitrc.j2' dest: '{{ vdr.home }}/.xinitrc' mode: 0755 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: "expand template for vdr's .Xresources" template: src: 'templates/.Xresources.j2' dest: '{{ vdr.home }}/.Xresources' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: expand template for openbox autostart template: src: 'templates/openbox/autostart.j2' dest: '{{ vdr.home }}/.config/openbox/autostart' mode: 0755 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: expand rc.xml for openbox template: src: 'templates/openbox/rc.xml.j2' dest: '{{ vdr.home }}/.config/openbox/rc.xml' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: create yavdr-desktop.target for the user session template: src: 'templates/systemd/user/yavdr-desktop.target.j2' dest: '{{ vdr.home }}/.config/systemd/user/yavdr-desktop.target' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: disable pulseaudio autospawning lineinfile: path: '{{ vdr.home }}/.config/pulse/client.conf' line: 'autospawn = yes' create: yes state: present owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: create tmux.service for the session template: src: roles/yavdr-xorg/templates/systemd/user/tmux.service.j2 dest: '{{ vdr.home }}/.config/systemd/user/tmux.service' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: create wm-exit.service for the session template: src: roles/yavdr-xorg/templates/systemd/user/wm-exit.service.j2 dest: '{{ vdr.home }}/.config/systemd/user/wm-exit.service' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: create detect-second-display.service for the session template: src: templates/systemd/user/detect-second-display.service.j2 dest: '{{ vdr.home }}/.config/systemd/user/detect-second-display.service' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: create openbox-second.service for the session template: src: templates/systemd/user/openbox-second.service.j2 dest: '{{ vdr.home }}/.config/systemd/user/openbox-second.service' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: create osd2web.service for the session template: src: templates/systemd/user/osd2web.service.j2 dest: '{{ vdr.home }}/.config/systemd/user/osd2web.service' owner: '{{ vdr.user }}' group: '{{ vdr.group }}' mode: 0644 - name: create irexec configuration for the session block: - template: src: templates/systemd/user/irexec.service.j2 dest: '{{ vdr.home }}/.config/systemd/user/irexec.service' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - template: src: templates/.lircrc.j2 dest: '{{ vdr.home }}/.lircrc' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: link /usr/bin/start-desktop to /var/lib/vdr/plugins/desktop/starter file: src: /usr/bin/start-desktop dest: /var/lib/vdr/plugins/desktop/starter state: link - name: enable and start xlogin for the vdr user systemd: daemon_reload: yes name: 'xlogin@{{ vdr.user }}' enabled: yes state: started
7.10.4 templates
- xorg
- x-verbose@.service
# file: roles/yavdr-xorg/templates/systemd/system/x-verbose@.service.j2 [Unit] Description=X with verbose logging on %I Wants=graphical.target Before=graphical.target [Service] Type=forking ExecStart=/usr/bin/x-daemon -logverbose 6 -noreset %I -config /etc/X11/xorg-verbose.conf
- Drop-in snippet for x@.service
[Unit] Before=xlogin@{{ vdr.user }}.service
[Unit] Wants=x@vt7.service After=x@vt7.service [Service] TimeoutStopSec=20 KillMode=mixed
- Drop-in snippet for vdr.service
{{ ansible_managed | comment }} [Unit] After=x@vt7.service Wants=x@vt7.service #BindsTo=x@vt7.service - .xinitrc
#!/bin/bash {{ ansible_managed | comment }} exec openbox-session
- xorg.conf
Section "Device" Identifier "nvidia" Driver "nvidia" Option "NoLogo" "true" Option "DynamicTwinView" "true" Option "NoFlip" "false" # Option "FlatPanelProperties" "Scaling = Native" # Option "ModeValidation" "NoVesaModes, NoXServerModes" # Option "ModeDebug" "true" # Option "HWCursor" "false" EndSection Section "Screen" Identifier "screen" Device "nvidia" EndSection Section "Extensions" Option "Composite" "false" EndSection
{{ ansible_managed | comment }} Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 {% if xorg.secondary is defined %} Screen 1 "Screen1" RightOf "Screen0" {% endif %} #InputDevice "Keyboard0" "CoreKeyboard" #InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputClass" Identifier "exclude eventlircd devices" MatchTag "eventlircd" Option "Ignore" "True" EndSection Section "Monitor" Identifier "Monitor0" VendorName "{{ xorg.primary.vendor }}" ModelName "{{ xorg.primary.model }}" Option "DPMS" Option "ExactModeTimingsDVI" "True" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" {% if xorg.primary.bus_id is defined %} BoardName "{{ xorg.primary.gpu_name }}" BusID "{{ xorg.primary.bus_id }}" {% else %} BoardName "Unknown" {% endif %} Screen 0 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "nvidiaXineramaInfoOrder" "{{ xorg.primary.connector }}" Option "ConnectedMonitor" "{{ xorg.primary.connector }}{% if xorg.secondary is defined %}, {{ xorg.secondary.connector }}{% endif %}" Option "UseDisplayDevice" "{{ xorg.primary.connector }}" Option "CustomEDID" "{{ xorg.primary.connector }}:/etc/X11/edid.{{ xorg.primary.connector }}.bin" Option "metamodes" "{{ xorg.primary.connector }}: {{ xorg.primary.mode }} +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}" Option "AllowIndirectGLXProtocol" "off" Option "TripleBuffer" "on" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection {% if xorg.secondary is defined %} Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" {% if xorg.secondary.bus_id is defined %} BoardName "{{ xorg.primary.gpu_name }}" BusID "{{ xorg.primary.bus_id }}" {% else %} BoardName "Unknown" {% endif %} Screen 1 EndSection Section "Monitor" Identifier "Monitor1" VendorName "{{ xorg.secondary.vendor }}" ModelName "{{ xorg.secondary.model }}" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "nvidiaXineramaInfoOrder" "{{ xorg.secondary.connector }}" Option "ConnectedMonitor" "{{ xorg.secondary.connector }}" Option "UseDisplayDevice" "{{ xorg.secondary.connector }}" Option "CustomEDID" "{{ xorg.secondary.connector }}:/etc/X11/edid.{{ xorg.secondary.connector }}.bin" Option "metamodes" "{{ xorg.secondary.connector }}: {{ xorg.secondary.mode }} +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}" Option "AllowIndirectGLXProtocol" "off" Option "TripleBuffer" "on" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection {% endif %}{{ ansible_managed | comment }} Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" {% if xorg.best_tv_mode.secondary is defined %} Screen 1 "Screen1" RightOf "Screen0" {% endif %} InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection # ignore devices with eventlircd tag # ENV{ID_INPUT.tags}+="eventlircd" # must be set by an udev rule Section "InputClass" Identifier "ignore eventlircd devices" MatchTag "eventlircd" Option "Ignore" "True" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" {# TODO: VGA2SCART support (if needed) {% if system.x11.display.0.default == "VGA2Scart_4_3" or system.x11.display.0.default == "VGA2Scart_16_9" %} HorizSync 14-17 VertRefresh 49-61 {% if system.x11.display.0.default == "VGA2Scart_4_3" %} Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace {% elif system.x11.display.0.default == "VGA2Scart_16_9" %} Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace {% endif %} {% endif %} #} Option "DPMS" Option "ExactModeTimingsDVI" "True" EndSection {% if xrandr.best_tv_mode.secondary is defined %} Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Unknown" {# {% if system.x11.display.1.default in ("VGA2Scart_4_3", "VGA2Scart_16_9") %} HorizSync 14-17 VertRefresh 49-61 {% if system.x11.display.1.default == "VGA2Scart_4_3" %} Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace {% elif system.x11.display.1.default == "VGA2Scart_16_9" %} Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace {% endif %} Option "DPMS" Option "ExactModeTimingsDVI" "True" {% endif %} #} EndSection {% endif %} Section "Device" Identifier "Device0" {% if system.hardware.nvidia.detected %} Driver "nvidia" VendorName "NVIDIA Corporation" {% endif %} Screen 0 Option "DPI" "100x100" {% if system.hardware.nvidia.busid is defined and system.hardware.busid %} BusID "PCI: {{ system.hardware.nvidia.busid }}" {% endif %} Option "NoLogo" "True" Option "UseEvents" "True" Option "TripleBuffer" "False" Option "AddARGBGLXVisuals" "True" Option "TwinView" "0" Option "DynamicTwinView" "0" Option "OnDemandVBlankinterrupts" "on" Option "FlatPanelProperties" "Scaling = Native" EndSection {% if xrandr.best_tv_mode.secondary is defined %} Section "Device" Identifier "Device1" {% if system.hardware.nvidia.detected %} Driver "nvidia" VendorName "NVIDIA Corporation" {% endif %} Screen 1 {% if system.hardware.nvidia.busid is defined and system.hardware.nvidia.busid %} BusID "PCI: {{ system.hardware.nvidia.busid }}" {% endif %} Option "NoLogo" "True" Option "UseEvents" "True" Option "TripleBuffer" "False" Option "AddARGBGLXVisuals" "True" Option "TwinView" "0" Option "DynamicTwinView" "0" EndSection {% endif %} Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 {% if xrandr.best_tv_mode.primary is defined %} Modes "{{ xrandr.best_tv_mode.primary.mode }}"{#{% for mode in xrandr %}{% if mode != system.x11.display.0.default %} "{{ mode }}"{% endif %}{% endfor %}#} nvidia-auto-select {% elif system.hardware.nvidia.detected == 1 %} Modes "nvidia-auto-select" {% endif %} EndSubSection {% if system.x11.display.0.default or system.x11.default %} {% if system.x11.display.0.device is definded and system.x11.display.0.device %} Option "ConnectedMonitor" {{ system.x11.display.0.device }} {% else %} Option "ConnectedMonitor" {{ system.x11.default }} {% endif %} # Option "ConnectedMonitor" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?><?cs if:(?system.x11.dualhead.enabled && system.x11.dualhead.enabled == 1) ?>, <?cs call:fix_display_name(system.x11.display.1.device) ?><?cs /if ?>" #Option "ConnectedMonitor" "<?cs if:(?system.x11.display.0.device) ?> <?cs call:fix_display_name(system.x11.display.0.device) ?> <?cs else ?> <?cs var:system.x11.default ?> <?cs /if ?> <?cs if:(?system.x11.dualhead.enabled && system.x11.dualhead.enabled == 1) ?>, <?cs call:fix_display_name(system.x11.display.1.device) ?><?cs /if ?>" # Option "UseDisplayDevice" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?>" # <?cs /if ?> # <?cs if:(?system.hardware.nvidia.0.edid && system.hardware.nvidia.0.edid == "1") ?> # Option "CustomEDID" "<?cs call:fix_display_name(system.x11.display.0.device) ?>:/etc/X11/edid.0.yavdr" # <?cs /if ?> # <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.0.device) ?> # Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:system.x11.display.0.default ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }" # <?cs each:mode = system.x11.display.0.mode ?><?cs if:(mode != system.x11.display.0.default) ?> # Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?> {% endif %} EndSection {% if system.x11.dualhead.enabled == "1" %} Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 {% if system.x11.display.0.default is defined and system.x11.display.0.default %} Modes "{{ system.x11.display.1.default }}"{% for mode in system.x11.display.1.mode %}{% if mode != system.x11.display.1.default %} "{{ mode }}"{% endif %}{% endfor %} {% elif system.hardware.nvidia.detected == "1" %} Modes "nvidia-auto-select" {% endif %} EndSubSection # <?cs if:(?system.x11.display.1.default && system.x11.display.1.default != "" && system.x11.display.1.default != "disabled") ?> # Option "UseDisplayDevice" "<?cs call:fix_display_name(system.x11.display.1.device) ?>" # <?cs /if ?> # <?cs if:(?system.hardware.nvidia.1.edid && system.hardware.nvidia.1.edid == "1") ?> # Option "CustomEDID" "<?cs call:fix_display_name(system.x11.display.1.device) ?>:/etc/X11/edid.1.yavdr" # <?cs /if ?> # <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.1.device) ?> # Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:system.x11.display.1.default ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }" # <?cs each:mode = system.x11.display.1.mode ?><?cs if:(mode != system.x11.display.1.default) ?> # Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?> # <?cs /if ?> EndSection {% endif %} - .Xresources
xterm*background: Black xterm*foreground: grey XTerm*locale: true XTerm*metaSendsEscape: true XTerm*eightBitInput: false XTerm*backarrowKey: false XTerm*ttyModes: erase ^? Xterm*saveLines: 4096 XTerm.vt100.metaSendsEscape: true XTerm.vt100.geometry: 80x32 XTerm.vt100.renderFont: true xterm*faceName: xft:DejaVu Sans Mono xterm*faceSize: 14 xterm*renderFont: true XTerm.vt100.faceName: xft:DejaVu Sans Mono:size=12:antialias=false XTerm.vt100.font: 7x13
- x-verbose@.service
- vdr
[Service] Environment=XDG_RUNTIME_DIR=/run/user/{{ vdr.uid }}/ EnvironmentFile=-/var/lib/vdr/.session-env
[Unit] After=network-online.target
- Systemd User Session
- yavdr-desktop.target
[Unit] Description=yaVDR Desktop Requires=default.target After=default.target pulseaudio.service Wants=dbus.service pulseaudio.service AllowIsolate=yes
- detect-second-display
[Unit] Description=Detect second DISPLAY using xrandr [Service] Type=oneshot ExecStart=/bin/bash -c 'export DISPLAY=$DISPLAY.1; xrandr -q | grep "connected" && echo "DISPLAY=$DISPLAY" > ~/.second_display || rm -f ~/.second_display' [Install] WantedBy=yavdr-desktop.target
- openbox-second.service
[Unit] Description=Start openbox on the second DISPLAY if it exists After=detect-second-display.service Wants=detect-second-display.service Before=yavdr-frontend.service ConditionFileNotEmpty=%h/.second_display [Service] PassEnvironment=XDG_RUNTIME_DIR DBUS_SESSION_BUS_ADDRESS EnvironmentFile=%h/.second_display ExecStart=/usr/bin/openbox --config-file %h/.config/openbox/rc.xml ExecStartPost=/bin/bash %h/.fehbg [Install] WantedBy=yavdr-desktop.target
- osd2web.service
[Unit] Description=Start a kiosk browser on the second DISPLAY if it exists After=detect-second-display.service openbox-second.service Wants=detect-second-display.service openbox-second.service ConditionFileNotEmpty=%h/.second_display [Service] PassEnvironment=XDG_RUNTIME_DIR DBUS_SESSION_BUS_ADDRESS EnvironmentFile=%h/.second_display Environment=url="http://localhost:4444/skins/horchiTft/index.html?theme=anthraize&onlyView=1" EnvironmentFile=-%h/.config/osd2web/url ExecStart=/usr/bin/on_vdr -o -c 'kiosk-browser "${url}"' KillSignal=SIGINT [Install] WantedBy=yavdr-desktop.target
- tmux.service
[Unit] Description=Start tmux in detached session [Service] EnvironmentFile=-%h/.session-env Type=forking ExecStart=/usr/bin/tmux new-session -s use-session -d ExecStop=/usr/bin/tmux kill-session -t %u Restart=always [Install] WantedBy=default.target
- wm-exit.service
[Unit] Description=exit window manager gracefully [Service] ExecStart=/bin/true ExecStop=/usr/bin/openbox --exit RemainAfterExit=True [Install] WantedBy=default.target
- yavdr-desktop.target
- irexec
irexec.service starts irexec for the user session
[Unit] Description=LIRC command handler [Service] Type=simple ExecStart=/usr/bin/irexec %h/.lircrc [Install] WantedBy=yavdr-desktop.target
~/.lircrc contains the irexec configuration
begin prog = irexec button = KEY_HOME config = frontend-dbus-send switchbetween kodi vdr end - openbox
- autostart
# forward environment variables to an environment file and the systemd user session env | grep "DISPLAY\|DBUS_SESSION_BUS_ADDRESS\|XDG_RUNTIME_DIR" > ~/.session-env systemctl --user import-environment DISPLAY XAUTHORITY XDG_RUNTIME_DIR DBUS_SESSION_BUS_ADDRESS feh --bg-center "/usr/share/yavdr/images/yavdr_logo.png" enabled_services=( "tmux.service" "detect-second-display.service" "openbox-second.service" "osd2web.service" "yavdr-frontend.service" "pulseaudio.socket" "pulseaudio.service" "wm-exit.service" "irexec.service") disabled_services=() # enable configured services for the user session for service in "${enabled_services[@]}"; do systemctl --user enable "$service" done # disable unwanted services for the user session for service in "${disabled_services[@]}"; do systemctl --user disable "$service" done if which dbus-update-activation-environment >/dev/null 2>&1; then dbus-update-activation-environment DISPLAY XAUTHORITY XDG_RUNTIME_DIR fi # start systemd units for the yavdr user session systemctl --user isolate yavdr-desktop.target
- rc.xml
<?xml version="1.0" encoding="UTF-8"?> <openbox_config xmlns="http://openbox.org/3.4/rc" xmlns:xi="http://www.w3.org/2001/XInclude"> <!-- Do not edit this file, it will be overwritten on install. Copy the file to $HOME/.config/openbox/ instead. --> <resistance> <strength>10</strength> <screen_edge_strength>20</screen_edge_strength> </resistance> <focus> <focusNew>yes</focusNew> <!-- always try to focus new windows when they appear. other rules do apply --> <followMouse>no</followMouse> <!-- move focus to a window when you move the mouse into it --> <focusLast>yes</focusLast> <!-- focus the last used window when changing desktops, instead of the one under the mouse pointer. when followMouse is enabled --> <underMouse>no</underMouse> <!-- move focus under the mouse, even when the mouse is not moving --> <focusDelay>200</focusDelay> <!-- when followMouse is enabled, the mouse must be inside the window for this many milliseconds (1000 = 1 sec) before moving focus to it --> <raiseOnFocus>no</raiseOnFocus> <!-- when followMouse is enabled, and a window is given focus by moving the mouse into it, also raise the window --> </focus> <placement> <policy>Smart</policy> <!-- 'Smart' or 'UnderMouse' --> <center>yes</center> <!-- whether to place windows in the center of the free area found or the top left corner --> <monitor>Active</monitor> <!-- with Smart placement on a multi-monitor system, try to place new windows on: 'Any' - any monitor, 'Mouse' - where the mouse is, 'Active' - where the active window is, 'Primary' - only on the primary monitor --> <primaryMonitor>Active</primaryMonitor> <!-- The monitor where Openbox should place popup dialogs such as the focus cycling popup, or the desktop switch popup. It can be an index from 1, specifying a particular monitor. Or it can be one of the following: 'Mouse' - where the mouse is, or 'Active' - where the active window is --> </placement> <theme> <name>Onyx</name> <titleLayout>NLIMC</titleLayout> <!-- available characters are NDSLIMC, each can occur at most once. N: window icon L: window label (AKA title). I: iconify M: maximize C: close S: shade (roll up/down) D: omnipresent (on all desktops). --> <keepBorder>no</keepBorder> <animateIconify>yes</animateIconify> <font place="ActiveWindow"> <name>sans</name> <size>8</size> <!-- font size in points --> <weight>bold</weight> <!-- 'bold' or 'normal' --> <slant>normal</slant> <!-- 'italic' or 'normal' --> </font> <font place="InactiveWindow"> <name>sans</name> <size>8</size> <!-- font size in points --> <weight>bold</weight> <!-- 'bold' or 'normal' --> <slant>normal</slant> <!-- 'italic' or 'normal' --> </font> <font place="MenuHeader"> <name>sans</name> <size>9</size> <!-- font size in points --> <weight>normal</weight> <!-- 'bold' or 'normal' --> <slant>normal</slant> <!-- 'italic' or 'normal' --> </font> <font place="MenuItem"> <name>sans</name> <size>9</size> <!-- font size in points --> <weight>normal</weight> <!-- 'bold' or 'normal' --> <slant>normal</slant> <!-- 'italic' or 'normal' --> </font> <font place="ActiveOnScreenDisplay"> <name>sans</name> <size>9</size> <!-- font size in points --> <weight>bold</weight> <!-- 'bold' or 'normal' --> <slant>normal</slant> <!-- 'italic' or 'normal' --> </font> <font place="InactiveOnScreenDisplay"> <name>sans</name> <size>9</size> <!-- font size in points --> <weight>bold</weight> <!-- 'bold' or 'normal' --> <slant>normal</slant> <!-- 'italic' or 'normal' --> </font> </theme> <desktops> <!-- this stuff is only used at startup, pagers allow you to change them during a session these are default values to use when other ones are not already set by other applications, or saved in your session use obconf if you want to change these without having to log out and back in --> <number>2</number> <firstdesk>1</firstdesk> <names> <!-- set names up here if you want to, like this: <name>desktop 1</name> <name>desktop 2</name> --> </names> <popupTime>875</popupTime> <!-- The number of milliseconds to show the popup for when switching desktops. Set this to 0 to disable the popup. --> </desktops> <resize> <drawContents>yes</drawContents> <popupShow>Nonpixel</popupShow> <!-- 'Always', 'Never', or 'Nonpixel' (xterms and such) --> <popupPosition>Center</popupPosition> <!-- 'Center', 'Top', or 'Fixed' --> <popupFixedPosition> <!-- these are used if popupPosition is set to 'Fixed' --> <x>10</x> <!-- positive number for distance from left edge, negative number for distance from right edge, or 'Center' --> <y>10</y> <!-- positive number for distance from top edge, negative number for distance from bottom edge, or 'Center' --> </popupFixedPosition> </resize> <!-- You can reserve a portion of your screen where windows will not cover when they are maximized, or when they are initially placed. Many programs reserve space automatically, but you can use this in other cases. --> <margins> <top>0</top> <bottom>0</bottom> <left>0</left> <right>0</right> </margins> <dock> <position>TopLeft</position> <!-- (Top|Bottom)(Left|Right|)|Top|Bottom|Left|Right|Floating --> <floatingX>0</floatingX> <floatingY>0</floatingY> <noStrut>no</noStrut> <stacking>Above</stacking> <!-- 'Above', 'Normal', or 'Below' --> <direction>Vertical</direction> <!-- 'Vertical' or 'Horizontal' --> <autoHide>no</autoHide> <hideDelay>300</hideDelay> <!-- in milliseconds (1000 = 1 second) --> <showDelay>300</showDelay> <!-- in milliseconds (1000 = 1 second) --> <moveButton>Middle</moveButton> <!-- 'Left', 'Middle', 'Right' --> </dock> <keyboard> <chainQuitKey>C-g</chainQuitKey> <!-- Keybindings for desktop switching --> <keybind key="C-A-Left"> <action name="GoToDesktop"> <to>left</to> <wrap>no</wrap> </action> </keybind> <keybind key="C-A-Right"> <action name="GoToDesktop"> <to>right</to> <wrap>no</wrap> </action> </keybind> <keybind key="C-A-Up"> <action name="GoToDesktop"> <to>up</to> <wrap>no</wrap> </action> </keybind> <keybind key="C-A-Down"> <action name="GoToDesktop"> <to>down</to> <wrap>no</wrap> </action> </keybind> <keybind key="S-A-Left"> <action name="SendToDesktop"> <to>left</to> <wrap>no</wrap> </action> </keybind> <keybind key="S-A-Right"> <action name="SendToDesktop"> <to>right</to> <wrap>no</wrap> </action> </keybind> <keybind key="S-A-Up"> <action name="SendToDesktop"> <to>up</to> <wrap>no</wrap> </action> </keybind> <keybind key="S-A-Down"> <action name="SendToDesktop"> <to>down</to> <wrap>no</wrap> </action> </keybind> <keybind key="W-F1"> <action name="GoToDesktop"> <to>1</to> </action> </keybind> <keybind key="W-F2"> <action name="GoToDesktop"> <to>2</to> </action> </keybind> <keybind key="W-F3"> <action name="GoToDesktop"> <to>3</to> </action> </keybind> <keybind key="W-F4"> <action name="GoToDesktop"> <to>4</to> </action> </keybind> <keybind key="W-d"> <action name="ToggleShowDesktop"/> </keybind> <!-- Keybindings for windows --> <keybind key="A-F4"> <action name="Close"/> </keybind> <keybind key="A-Escape"> <action name="Lower"/> <action name="FocusToBottom"/> <action name="Unfocus"/> </keybind> <keybind key="A-space"> <action name="ShowMenu"> <menu>client-menu</menu> </action> </keybind> <!-- Take a screenshot of the current window with scrot when Alt+Print are pressed --> <keybind key="A-Print"> <action name="Execute"> <command>scrot -s</command> </action> </keybind> <!-- Keybindings for window switching --> <keybind key="A-Tab"> <action name="NextWindow"> <finalactions> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </finalactions> </action> </keybind> <keybind key="A-S-Tab"> <action name="PreviousWindow"> <finalactions> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </finalactions> </action> </keybind> <keybind key="C-A-Tab"> <action name="NextWindow"> <panels>yes</panels> <desktop>yes</desktop> <finalactions> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </finalactions> </action> </keybind> <!-- Keybindings for window switching with the arrow keys --> <keybind key="W-S-Right"> <action name="DirectionalCycleWindows"> <direction>right</direction> </action> </keybind> <keybind key="W-S-Left"> <action name="DirectionalCycleWindows"> <direction>left</direction> </action> </keybind> <keybind key="W-S-Up"> <action name="DirectionalCycleWindows"> <direction>up</direction> </action> </keybind> <keybind key="W-S-Down"> <action name="DirectionalCycleWindows"> <direction>down</direction> </action> </keybind> </keyboard> <mouse> <dragThreshold>1</dragThreshold> <!-- number of pixels the mouse must move before a drag begins --> <doubleClickTime>500</doubleClickTime> <!-- in milliseconds (1000 = 1 second) --> <screenEdgeWarpTime>400</screenEdgeWarpTime> <!-- Time before changing desktops when the pointer touches the edge of the screen while moving a window, in milliseconds (1000 = 1 second). Set this to 0 to disable warping --> <screenEdgeWarpMouse>false</screenEdgeWarpMouse> <!-- Set this to TRUE to move the mouse pointer across the desktop when switching due to hitting the edge of the screen --> <context name="Frame"> <mousebind button="A-Left" action="Press"> <action name="Focus"/> <action name="Raise"/> </mousebind> <mousebind button="A-Left" action="Click"> <action name="Unshade"/> </mousebind> <mousebind button="A-Left" action="Drag"> <action name="Move"/> </mousebind> <mousebind button="A-Right" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </mousebind> <mousebind button="A-Right" action="Drag"> <action name="Resize"/> </mousebind> <mousebind button="A-Middle" action="Press"> <action name="Lower"/> <action name="FocusToBottom"/> <action name="Unfocus"/> </mousebind> <mousebind button="A-Up" action="Click"> <action name="GoToDesktop"> <to>previous</to> </action> </mousebind> <mousebind button="A-Down" action="Click"> <action name="GoToDesktop"> <to>next</to> </action> </mousebind> <mousebind button="C-A-Up" action="Click"> <action name="GoToDesktop"> <to>previous</to> </action> </mousebind> <mousebind button="C-A-Down" action="Click"> <action name="GoToDesktop"> <to>next</to> </action> </mousebind> <mousebind button="A-S-Up" action="Click"> <action name="SendToDesktop"> <to>previous</to> </action> </mousebind> <mousebind button="A-S-Down" action="Click"> <action name="SendToDesktop"> <to>next</to> </action> </mousebind> </context> <context name="Titlebar"> <mousebind button="Left" action="Drag"> <action name="Move"/> </mousebind> <mousebind button="Left" action="DoubleClick"> <action name="ToggleMaximize"/> </mousebind> <mousebind button="Up" action="Click"> <action name="if"> <shaded>no</shaded> <then> <action name="Shade"/> <action name="FocusToBottom"/> <action name="Unfocus"/> <action name="Lower"/> </then> </action> </mousebind> <mousebind button="Down" action="Click"> <action name="if"> <shaded>yes</shaded> <then> <action name="Unshade"/> <action name="Raise"/> </then> </action> </mousebind> </context> <context name="Titlebar Top Right Bottom Left TLCorner TRCorner BRCorner BLCorner"> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </mousebind> <mousebind button="Middle" action="Press"> <action name="Lower"/> <action name="FocusToBottom"/> <action name="Unfocus"/> </mousebind> <mousebind button="Right" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="ShowMenu"> <menu>client-menu</menu> </action> </mousebind> </context> <context name="Top"> <mousebind button="Left" action="Drag"> <action name="Resize"> <edge>top</edge> </action> </mousebind> </context> <context name="Left"> <mousebind button="Left" action="Drag"> <action name="Resize"> <edge>left</edge> </action> </mousebind> </context> <context name="Right"> <mousebind button="Left" action="Drag"> <action name="Resize"> <edge>right</edge> </action> </mousebind> </context> <context name="Bottom"> <mousebind button="Left" action="Drag"> <action name="Resize"> <edge>bottom</edge> </action> </mousebind> <mousebind button="Right" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="ShowMenu"> <menu>client-menu</menu> </action> </mousebind> </context> <context name="TRCorner BRCorner TLCorner BLCorner"> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </mousebind> <mousebind button="Left" action="Drag"> <action name="Resize"/> </mousebind> </context> <context name="Client"> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> </mousebind> <mousebind button="Middle" action="Press"> <action name="Focus"/> <action name="Raise"/> </mousebind> <mousebind button="Right" action="Press"> <action name="Focus"/> <action name="Raise"/> </mousebind> </context> <context name="Icon"> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> <action name="ShowMenu"> <menu>client-menu</menu> </action> </mousebind> <mousebind button="Right" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="ShowMenu"> <menu>client-menu</menu> </action> </mousebind> </context> <context name="AllDesktops"> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </mousebind> <mousebind button="Left" action="Click"> <action name="ToggleOmnipresent"/> </mousebind> </context> <context name="Shade"> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> </mousebind> <mousebind button="Left" action="Click"> <action name="ToggleShade"/> </mousebind> </context> <context name="Iconify"> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> </mousebind> <mousebind button="Left" action="Click"> <action name="Iconify"/> </mousebind> </context> <context name="Maximize"> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </mousebind> <mousebind button="Middle" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </mousebind> <mousebind button="Right" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </mousebind> <mousebind button="Left" action="Click"> <action name="ToggleMaximize"/> </mousebind> <mousebind button="Middle" action="Click"> <action name="ToggleMaximize"> <direction>vertical</direction> </action> </mousebind> <mousebind button="Right" action="Click"> <action name="ToggleMaximize"> <direction>horizontal</direction> </action> </mousebind> </context> <context name="Close"> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> <action name="Unshade"/> </mousebind> <mousebind button="Left" action="Click"> <action name="Close"/> </mousebind> </context> <context name="Desktop"> <mousebind button="Up" action="Click"> <action name="GoToDesktop"> <to>previous</to> </action> </mousebind> <mousebind button="Down" action="Click"> <action name="GoToDesktop"> <to>next</to> </action> </mousebind> <mousebind button="A-Up" action="Click"> <action name="GoToDesktop"> <to>previous</to> </action> </mousebind> <mousebind button="A-Down" action="Click"> <action name="GoToDesktop"> <to>next</to> </action> </mousebind> <mousebind button="C-A-Up" action="Click"> <action name="GoToDesktop"> <to>previous</to> </action> </mousebind> <mousebind button="C-A-Down" action="Click"> <action name="GoToDesktop"> <to>next</to> </action> </mousebind> <mousebind button="Left" action="Press"> <action name="Focus"/> <action name="Raise"/> </mousebind> <mousebind button="Right" action="Press"> <action name="Focus"/> <action name="Raise"/> </mousebind> </context> <context name="Root"> <!-- Menus --> <mousebind button="Middle" action="Press"> <action name="ShowMenu"> <menu>client-list-combined-menu</menu> </action> </mousebind> <mousebind button="Right" action="Press"> <action name="ShowMenu"> <menu>root-menu</menu> </action> </mousebind> </context> <context name="MoveResize"> <mousebind button="Up" action="Click"> <action name="GoToDesktop"> <to>previous</to> </action> </mousebind> <mousebind button="Down" action="Click"> <action name="GoToDesktop"> <to>next</to> </action> </mousebind> <mousebind button="A-Up" action="Click"> <action name="GoToDesktop"> <to>previous</to> </action> </mousebind> <mousebind button="A-Down" action="Click"> <action name="GoToDesktop"> <to>next</to> </action> </mousebind> </context> </mouse> <menu> <!-- You can specify more than one menu file in here and they are all loaded, just don't make menu ids clash or, well, it'll be kind of pointless --> <!-- default menu file (or custom one in $HOME/.config/openbox/) --> <!-- system menu files on Debian systems --> <file>/var/lib/openbox/debian-menu.xml</file> <file>menu.xml</file> <hideDelay>200</hideDelay> <!-- if a press-release lasts longer than this setting (in milliseconds), the menu is hidden again --> <middle>no</middle> <!-- center submenus vertically about the parent entry --> <submenuShowDelay>100</submenuShowDelay> <!-- time to delay before showing a submenu after hovering over the parent entry. if this is a negative value, then the delay is infinite and the submenu will not be shown until it is clicked on --> <submenuHideDelay>400</submenuHideDelay> <!-- time to delay before hiding a submenu when selecting another entry in parent menu if this is a negative value, then the delay is infinite and the submenu will not be hidden until a different submenu is opened --> <showIcons>yes</showIcons> <!-- controls if icons appear in the client-list-(combined-)menu --> <manageDesktops>yes</manageDesktops> <!-- show the manage desktops section in the client-list-(combined-)menu --> </menu> <!-- # this is an example with comments through out. use these to make your # own rules, but without the comments of course. # you may use one or more of the name/class/role/title/type rules to specify # windows to match <application name="the window's _OB_APP_NAME property (see obxprop)" class="the window's _OB_APP_CLASS property (see obxprop)" groupname="the window's _OB_APP_GROUP_NAME property (see obxprop)" groupclass="the window's _OB_APP_GROUP_CLASS property (see obxprop)" role="the window's _OB_APP_ROLE property (see obxprop)" title="the window's _OB_APP_TITLE property (see obxprop)" type="the window's _OB_APP_TYPE property (see obxprob).. (if unspecified, then it is 'dialog' for child windows)"> # you may set only one of name/class/role/title/type, or you may use more # than one together to restrict your matches. # the name, class, role, and title use simple wildcard matching such as those # used by a shell. you can use * to match any characters and ? to match # any single character. # the type is one of: normal, dialog, splash, utility, menu, toolbar, dock, # or desktop # when multiple rules match a window, they will all be applied, in the # order that they appear in this list # each rule element can be left out or set to 'default' to specify to not # change that attribute of the window <decor>yes</decor> # enable or disable window decorations <shade>no</shade> # make the window shaded when it appears, or not <position force="no"> # the position is only used if both an x and y coordinate are provided # (and not set to 'default') # when force is "yes", then the window will be placed here even if it # says you want it placed elsewhere. this is to override buggy # applications who refuse to behave <x>center</x> # a number like 50, or 'center' to center on screen. use a negative number # to start from the right (or bottom for <y>), ie -50 is 50 pixels from # the right edge (or bottom). use 'default' to specify using value # provided by the application, or chosen by openbox, instead. <y>200</y> <monitor>1</monitor> # specifies the monitor in a xinerama setup. # 1 is the first head, or 'mouse' for wherever the mouse is </position> <size> # the size to make the window. <width>20</width> # a number like 20, or 'default' to use the size given by the application. # you can use fractions such as 1/2 or percentages such as 75% in which # case the value is relative to the size of the monitor that the window # appears on. <height>30%</height> </size> <focus>yes</focus> # if the window should try be given focus when it appears. if this is set # to yes it doesn't guarantee the window will be given focus. some # restrictions may apply, but Openbox will try to <desktop>1</desktop> # 1 is the first desktop, 'all' for all desktops <layer>normal</layer> # 'above', 'normal', or 'below' <iconic>no</iconic> # make the window iconified when it appears, or not <skip_pager>no</skip_pager> # asks to not be shown in pagers <skip_taskbar>no</skip_taskbar> # asks to not be shown in taskbars. window cycling actions will also # skip past such windows <fullscreen>yes</fullscreen> # make the window in fullscreen mode when it appears <maximized>true</maximized> # 'Horizontal', 'Vertical' or boolean (yes/no) </application> # end of the example --> <applications> <application title="softhddevice"> <decor>no</decor> <maximized>yes</maximized> <!--<skip_pager>yes</skip_pager>--> <skip_taskbar>no</skip_taskbar> </application> <application class="VDR"> <decor>no</decor> <maximized>yes</maximized> <!--<skip_pager>yes</skip_pager>--> <skip_taskbar>no</skip_taskbar> </application> <application title="browser"> <decor>no</decor> <maximized>yes</maximized> <!--<skip_pager>yes</skip_pager>--> <skip_taskbar>no</skip_taskbar> </application> <application title="osd2Web"> <decor>no</decor> <maximized>yes</maximized> <!--<skip_pager>yes</skip_pager>--> <skip_taskbar>no</skip_taskbar> </application> </applications> </openbox_config>
- autostart
7.11 samba-install
7.11.1 tasks
--- # file: roles/samba-install/tasks/main.yml - name: install samba server apt: name: '{{ item }}' state: present install_recommends: no with_items: - samba - samba-common - samba-common-bin - tdb-tools
7.12 samba-config
7.12.1 tasks
--- # file: roles/samba-config/tasks/main.yml # TODO: # - name: divert original smbd.conf - name: touch smb.conf.custom file: state: touch dest: '/etc/samba/smb.conf.custom' notify: [ 'Restart Samba' ] - name: expand template for smb.conf template: src: 'templates/smb.conf.j2' dest: '/etc/samba/smb.conf' #validate: 'testparm -s %s' notify: [ 'Restart Samba' ]
7.12.2 templates
- smb.conf
- global settings
{{ ansible_managed | comment }} #======================= Global Settings ======================= [global] ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of workgroup = {{ samba.workgroup }} # server string is the equivalent of the NT Description field server string = %h server (Samba, Ubuntu) # This will prevent nmbd to search for NetBIOS names through DNS. dns proxy = no #### Debugging/Accounting #### # This tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Cap the size of the individual log files (in KiB). max log size = 1000 # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. syslog = 0 # Do something sensible when Samba crashes: mail the admin a backtrace panic action = /usr/share/samba/panic-action %d ####### Authentication ####### # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. # security = user # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. encrypt passwords = true # If you are using encrypted passwords, Samba will need to know what # password database type you are using. passdb backend = tdbsam obey pam restrictions = yes # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. unix password sync = yes # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. pam password change = yes # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections map to guest = bad user {% if samba.windows_compatible %} # disable unix extensions and enable following symlinks unix extensions = no follow symlinks= yes wide links= yes {% endif %} - media directories
{% for name, path in media_dirs.iteritems() %} [{{ name }}] path = {{ path }} comment = {{ name }} on %h guest ok = yes writeable = yes browseable = yes create mode = 0664 directory mode = 0775 force user = {{ vdr.user }} force group = {{ vdr.group }} follow symlinks = yes wide links = yes {% endfor %} - include custom samba exports
include = /etc/samba/smb.conf.custom
- global settings
7.13 STARTED autoinstall-drivers
It would be nice to be able to detect if it is suitable to install those drivers:
7.13.1 TODO sundtek for Sundtek devices (local or network connection)
Vendor-IDs:
- eb1a:5[1b2] (alte Generation)
- 2659:* (neuere Sticks)
7.13.2 TODO dddvb-dkms if only newer DD cards are detected
7.13.3 TODO media-build-experimental (up to kernel 4.8) for „old“ cards like TT S2-6400 FF
7.13.4 TODO newly merged DD drivers
7.14 autoinstall-ubuntu-drivers
The tool ubuntu-drivers is used to install the matching driver version for nvidia graphics cards, virtualbox guest additions and Intel and AMD microcode updates.
7.14.1 tasks
--- # file roles/autoinstall-ubuntu-drivers/tasks/main.yml - name: autoinstall ubuntu-drivers-common block: - name: apt | install ubuntu-drivers-common apt: name: ubuntu-drivers-common state: present - name: use ubuntu-drivers to install additional drivers automatically command: ubuntu-drivers --package-list /etc/yavdr/autoinstalled autoinstall when: (ansible_virtualization_type != "virtualbox" and ansible_virtualization_role != "guest") or ansible_distribution_version != "16.04" # ubuntu-drivers-common tries to autoinstall # conflicting packages for virtualbox in Ubuntu 16.04 :(
7.15 autoinstall-virtualbox-guest
This role installs the guest additions for virtualbox guests on Ubuntu 16.04
--- # file roles/autoinstall-virtualbox-guest/tasks/main.yml - name: install virtualbox guest additions block: - name: install packages apt: state: present name: '{{ item }}' with_items: - virtualbox-guest-dkms - virtualbox-guest-x11 - dkms # TODO: set xineliboutput as frontend when: - ansible_virtualization_type == "virtualbox" - ansible_virtualization_role == "guest" - ansible_distribution == "Ubuntu" - ansible_distribution_version == "16.04"
7.16 autoinstall-atric-usb
7.16.1 dependencies
--- dependencies: - { role: collect-facts } - { role: yavdr-remote }
7.16.2 tasks
--- # file roles/autoinstall-atric-usb/tasks/main.yml - name: install and configure Atric IR-WakeupUSB block: - name: apt | install lirc-drv-irman apt: name: lirc-drv-irman state: present tags: - packages - name: write lirc configuration template: src: templates/lirc_options.conf.j2 dest: /etc/lirc/lirc_options.conf tags: - config - systemd - name: enable lircd, eventlircd, lircd2uinput systemd: name: '{{ item }}' enabled: yes state: started masked: no daemon_reload: yes with_items: - eventlircd.socket - eventlircd.service - lircd2uinput.service - lircd.service tags: - systemd when: '"04d8:f844" in usb'
7.16.3 templates
{{ ansible_managed | comment }}
[lircd]
nodaemon = False
driver = irman
device = /dev/irman
output = /var/run/lirc/lircd0
pidfile = /var/run/lirc/lircd0.pid
plugindir = /usr/lib/x86_64-linux-gnu/lirc/plugins
permission = 666
allow-simulate = No
repeat-max = 600
#loglevel = 6
#release = true
#release_suffix = _EVUP
#logfile = ...
#driver-options = ...
[lircmd]
uinput = False
nodaemon = False
7.17 autoinstall-yausbir
7.17.1 dependencies
--- dependencies: - { role: yavdr-remote }
7.17.2 tasks
--- # file roles/autoinstall-atric-usb/tasks/main.yml - name: install and configure Atric IR-WakeupUSB block: - name: apt | install lirc-drv-yausbir apt: name: lirc-drv-yausbir state: present tags: - packages - name: write lirc configuration template: src: templates/lirc_options.conf.j2 dest: /etc/lirc/lirc_options.conf tags: - config - systemd - name: enable lircd, eventlircd, lircd2uinput systemd: name: '{{ item }}' enabled: yes state: started masked: no daemon_reload: yes with_items: - eventlircd.socket - eventlircd.service - lircd2uinput.service - lircd.service tags: - systemd when: '"10c4:876c" in usb'
7.17.3 templates
{{ ansible_managed | comment }}
[lircd]
nodaemon = False
driver = ya_usbir
output = /var/run/lirc/lircd0
pidfile = /var/run/lirc/lircd0.pid
plugindir = /usr/lib/x86_64-linux-gnu/lirc/plugins
permission = 666
allow-simulate = No
repeat-max = 600
#loglevel = 6
#release = true
#release_suffix = _EVUP
#logfile = ...
#driver-options = ...
[lircmd]
uinput = False
nodaemon = False
7.18 autoinstall-satip
If a Sat>IP Server responds to a discovery request, the package vdr-plugin-satip is installed.
7.18.1 tasks
--- # file roles/autoinstall-satip/tasks/main.yml - name: "detect SAT>IP Server(s) on the network" action: satip_facts - debug: var: satip_devices verbosity: 1 - name: apt | install vdr-plugin-satip if a Sat>IP server has been detected apt: name: vdr-plugin-satip state: present when: satip_devices notify: [ 'Restart VDR' ]
7.19 autoinstall-targavfd
7.19.1 tasks
--- # file roles/autoinstall-targavfd/tasks/main.yml - name: apt | install vdr-plugin-targavfd if connected apt: name: vdr-plugin-targavfd when: '"19c2:6a11" in usb' notify: [ 'Restart VDR' ]
7.20 autoinstall-imonlcd
7.20.1 tasks
--- # file roles/autoinstall-imonlcd/tasks/main.yml - name: apt | install vdr-plugin-imonlcd if connected apt: name: vdr-plugin-imonlcd when: '"15c2:0038" in usb or "15c2:ffdc" in usb' notify: [ 'Restart VDR' ]
7.21 autoinstall-libcecdaemon
7.21.1 tasks
--- # file roles/autoinstall-libcec-daemon/tasks/main.yml - name: apt | install libcec-daemon if connected apt: name: libcec-daemon when: - "2548:1002" in usb
7.22 autoinstall-pvr350
7.22.1 tasks
--- # file roles/autoinstall-pvr350/tasks/main.yml - name: apt | install vdr-plugin-pvr350 if connected apt: name: vdr-plugin-pvr350 when: '"0070:4000" in pci' notify: [ 'Restart VDR' ]
7.23 autoinstall-hauppauge-pvr
--- # file roles/autoinstall-hauppauge-pvr/tasks/main.yml - name: apt | install vdr-plugin-pvrinput if a haupauge pvr card is found apt: name: vdr-plugin-pvrinput when: '"0070:4000" in pci or "4444:0016" in pci' notify: [ 'Restart VDR' ]
7.24 autoinstall-firmware
7.24.1 dependencies
--- dependencies: - { role: collect-facts }
7.24.2 tasks
--- # This role provides easyily downloadable firmware files - name: Firmware for Hauppauge WinTV HD Solo/Duo, PCTV 292e get_url: url: https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-demod-si2168-b40-01.fw checksum: sha256:8507536630d75a316d0719d6b95c04b90c36baa5b457ad457c9bacadafcef134 dest: /lib/firmware/dvb-demod-si2168-b40-01.fw when: '"2040:0264" in usb or "2013:025f" in usb' - name: Firmware for Hauppauge WinTV-HVR-930C get_url: url: https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-fe-xc5000-1.6.114.fw checksum: sha256:7104bda8df301fe1bd4c09de1708aeb6d0d8e1f9d55505449fecfad82639235f dest: /lib/firmware/dvb-fe-xc5000-1.6.114.fw when: '"2040:1605" in usb'
7.25 autoinstall-dvbsky-firmware
7.25.1 dependencies
--- dependencies: - { role: collect-facts }
7.25.2 defaults
--- # file roles/autoinstall-dvbsky-firmware dvbsky_firmware_files: []
7.25.3 tasks
--- # file roles/autoinstall-dvbsky-firmware/tasks/main.yml - name: determine needed firmware files by device ids block: - name: add firmware files for DVBSky if a card has been detected set_fact: dvbsky_firmware_files: ['dvb-demod-m88ds3103.fw', 'dvb-demod-m88rs6000.fw', 'dvb-tuner-si2158-a20-01.fw', 'dvb-demod-si2168-a20-01.fw', 'dvb-demod-si2168-a30-01.fw', 'dvb-demod-si2168-b40-01.fw', 'dvb-fe-ds300x.fw', 'dvb-fe-ds3103.fw', 'dvb-fe-rs6000.fw'] when: - '"1ade:3038" in pci' when: - not dvbsky_firmware_files - name: Download firmware for DVBSky cards and copy required files to /lib/firmware block: # download and extract firmware - unarchive: src: http://www.dvbsky.net/download/linux/dvbsky-firmware.tar.gz dest: /tmp/ remote_src: yes # copy firmware file - copy: src: "/tmp/dvbsky-firmware/{{ item }}" dest: /lib/firmware/ owner: root group: root mode: 0644 with_items: '{{ dvbsky_firmware_files }}' notify: ['Trigger Udev'] # Remove temporary files - file: path: /tmp/dvbsky-firmware state: absent when: - dvbsky_firmware_files is defined - dvbsky_firmware_files tags: - install - autodetect - dvbsky
7.26 TODO autoinstall-dvbhddevice
Problem: woher kommt der Treiber (AFAIK noch nicht im Kernel)? Die Firmware sollte in yavdr-firmware stecken
7.26.1 dependencies
--- dependencies: - { role: collect-facts }
7.26.2 tasks
--- # file roles/autoinstall-dvbhddevice/tasks/main.yml - name: apt | install vdr-plugin-dvbhddevice if connected apt: name: vdr-plugin-dvbhddevice when: '"13c2:300a" in pci or "13c2:300b" in pci' notify: [ 'Restart VDR' ]
7.27 autoinstall-dvbsddevice
7.27.1 dependencies
--- dependencies: - { role: collect-facts }
7.27.2 tasks
--- # file roles/autoinstall-dvbsddevice/tasks/main.yml # TODO: install firmware - name: apt | install vdr-plugin-dvbsddevice if module is loaded apt: name: vdr-plugin-dvbsddevice when: '"dvb_ttpci" in modules' notify: [ 'Restart VDR' ]
7.28 autoinstall-hardware-irmp
7.28.1 dependencies
--- dependencies: - { role: collect-facts }
7.29 kodi
7.29.1 tasks
- Install KODI
- main.yml
- import_tasks: install-kodi.yml tags=install,update,kodi:install - import_tasks: configure-kodi.yml tags=install,update,kodi:configure
- install-kodi.yml
--- - name: apt | install kodi packages apt: name: '{{ item }}' state: present install_recommends: no with_items: - kodi - kodi-pvr-vdr-vnsi - kodi-eventclients-kodi-send # for ubuntu packages, team-xbmc uses "kodi-eventclients-xbmc-send for some reason
- configure-kodi.yml
- name: create kodi.service for the user session template: src: 'templates/kodi.service.j2' dest: '{{ vdr.home }}/.config/systemd/user/kodi.service' mode: 0644 owner: '{{ vdr.user }}' group: '{{ vdr.group }}' - name: create kodi user directory file: dest: '{{ vdr.home }}/{{ item }}' state: directory owner: '{{ vdr.user }}' group: '{{ vdr.group }}' mode: "0775" with_items: - .kodi - .kodi/userdata - .kodi/userdata/keymaps - name: copy Lircmap.xml if it does not exist yet copy: dest: '{{ vdr.home }}/.kodi/userdata/Lircmap.xml' src: 'files/userdata/Lircmap.xml' owner: '{{ vdr.user }}' group: '{{ vdr.group }}' mode: "0664" force: no - name: copy remote.xml if it does not exist yet copy: dest: '{{ vdr.home }}/.kodi/userdata/keymaps/remote.xml' src: 'files/userdata/keymaps/remote.xml' owner: '{{ vdr.user }}' group: '{{ vdr.group }}' mode: "0664" force: no # TODO: Add configuration files
- main.yml
7.29.2 templates
- kodi.service
This systemd unit for the user session starts (and stops) kodi.
[Unit] Description=Start kodi in user session [Service] Type=simple PassEnvironment=DISPLAY XDG_RUNTIME_DIR DBUS_SESSION_BUS_ADDRESS ExecStartPre=-/usr/bin/set-kodi-display ExecStart=/usr/bin/kodi -l /run/lirc/lircd ExecStop=/bin/bash -c "/usr/bin/kodi-send --action=QUIT; while ps -p $MAINPID -o comm=; do sleep .25; done" TimeoutStopSec=10 SuccessExitStatus=0 127 Restart=on-failure
7.29.3 files
Those configuration files provide a preconfiguration for kodi which overrides the system wide configuration
- Lircmap.xml
This file allows to map keys sent by remotes via eventlircd (which uses the name
devinput) to kodi key names.<lircmap> <remote device="linux-input-layer"> <altname>cx23885_remote</altname> <altname>devinput</altname> <up>KEY_UP</up> <down>KEY_DOWN</down> <menu>KEY_MENU</menu> <select>KEY_OK</select> <back>KEY_ESC</back> <left>KEY_LEFT</left> <right>KEY_RIGHT</right> <red>KEY_RED</red> <green>KEY_GREEN</green> <yellow>KEY_YELLOW</yellow> <blue>KEY_BLUE</blue> <zero>KEY_0</zero> <one>KEY_1</one> <two>KEY_2</two> <three>KEY_3</three> <four>KEY_4</four> <five>KEY_5</five> <six>KEY_6</six> <seven>KEY_7</seven> <eight>KEY_8</eight> <nine>KEY_9</nine> <info>KEY_INFO</info> <play>KEY_PLAY</play> <play>KEY_PLAYPAUSE</play> <pause>KEY_PAUSE</pause> <stop>KEY_STOP</stop> <record>KEY_RECORD</record> <forward>KEY_FASTFORWARD</forward> <reverse>KEY_REWIND</reverse> <skipplus>KEY_NEXT</skipplus> <skipminus>KEY_BACK</skipminus> <power>KEY_POWER2</power> <channelplus>KEY_CHANNELUP</channelplus> <channelminus>KEY_CHANNELDOWN</channelminus> <title>KEY_PROG3</title> <volumeplus>KEY_VOLUMEUP</volumeplus> <volumeminus>KEY_VOLUMEDOWN</volumeminus> <teletext>KEY_TEXT</teletext> <mute>KEY_MUTE</mute> <start>KEY_SELECT</start> <subtitle>KEY_SUBTITLE</subtitle> <audio>KEY_MODE</audio> <mute>KEY_MUTE</mute> <myvideo>KEY_VIDEO</myvideo> <mymusic>KEY_AUDIO</mymusic> <mypictures>KEY_IMAGES</mypictures> <recordedtv>KEY_PVR</recordedtv> <guide>KEY_EPG</guide> <display>KEY_SCREEN</display> <enter>KEY_PROG4</enter> <playlist>KEY_ZOOM</playlist> <livetv>KEY_CHANNEL</livetv> <mytv>KEY_TV</mytv> <liveradio>KEY_FN</liveradio> </remote> </lircmap>
- keymaps
This file maps the keys defined in Lircmap.xml to actions within kodi.
- remote.xml
<!-- This file contains the mapping of keys (gamepad, remote, and keyboard) to actions within XBMC --> <!-- The <global> section is a fall through - they will only be used if the button is not --> <!-- used in the current window's section. Note that there is only handling --> <!-- for a single action per button at this stage. --> <!-- For joystick/gamepad configuration under linux/win32, see below as it differs from xbox --> <!-- gamepads. --> <!-- The format is: --> <!-- <device> --> <!-- <button>action</button> --> <!-- </device> --> <!-- To map keys from other remotes using the RCA protocol, you may add <universalremote> blocks --> <!-- In this case, the tags used are <obc#> where # is the original button code (OBC) of the key --> <!-- You set it up by adding a <universalremote> block to the window or <global> section: --> <!-- <universalremote> --> <!-- <obc45>Stop</obc45> --> <!-- </universalremote> --> <!-- To find out the OBC's of your remote, try enabling the <displayremotecodes> tag in AdvancedSettings.xml --> <!-- Note that the action can be a built-in function. --> <!-- eg <B>XBMC.ActivateWindow(MyMusic)</B> --> <!-- would automatically go to My Music on the press of the B button. --> <!-- Joysticks / Gamepads: --> <!-- See the sample PS3 controller configuration below for the format. --> <!-- --> <!-- Joystick Name: --> <!-- Do 'cat /proc/bus/input/devices' or see your xbmc log file to find the names of --> <!-- detected joysticks. The name used in the configuration should match the detected name. --> <!-- --> <!-- Button Ids: --> <!-- 'id' is the button ID used by SDL. Joystick button ids of connected joysticks appear --> <!-- in xbmc.log when they are pressed. Use your log to map custom buttons to actions. --> <!-- --> <!-- Axis Ids / Analog Controls --> <!-- Coming soon. --> <keymap> <global> <universalremote> <obc150>XBMC.ejecttray()</obc150> <obc151>Playlist</obc151> </universalremote> <remote> <play>PlayPause</play> <pause>Pause</pause> <stop>Stop</stop> <forward>FastForward</forward> <reverse>Rewind</reverse> <left>Left</left> <right>Right</right> <up>Up</up> <down>Down</down> <select>Select</select> <pageplus>PageUp</pageplus> <pageminus>PageDown</pageminus> <back>ParentDir</back> <menu>PreviousMenu</menu> <title>ContextMenu</title> <info>Info</info> <skipplus>SkipNext</skipplus> <skipminus>SkipPrevious</skipminus> <display>FullScreen</display> <start>PreviousMenu</start> <record>Screenshot</record> <volumeplus>VolumeUp</volumeplus> <volumeminus>VolumeDown</volumeminus> <mute>Mute</mute> <power>XBMC.Quit()</power> <myvideo>XBMC.ActivateWindow(MyVideos)</myvideo> <mymusic>XBMC.ActivateWindow(MyMusic)</mymusic> <mypictures>XBMC.ActivateWindow(MyPictures)</mypictures> <!--- <mytv>XBMC.ActivateWindow(Home)</mytv> --> <recordedtv>XBMC.ActivateWindowAndFocus(MyPVR, 34,0, 13,0)</recordedtv> <!-- PVR: EPG --> <guide>XBMC.ActivateWindowAndFocus(MyPVR, 31,0, 10,0)</guide> <!-- PVR: Channellist --> <livetv>XBMC.ActivateWindowAndFocus(MyPVR, 32,0, 11,0)</livetv> <!-- PVR: Radio --> <liveradio>XBMC.ActivateWindowAndFocus(MyPVR, 33,0, 12,0)</liveradio> <red>XBMC.ActivateWindow(Home)</red> <yellow>XBMC.ActivateWindow(MyVideos)</yellow> <green>XBMC.ActivateWindow(MyMusic)</green> <!-- <blue>XBMC.ActivateWindow(MyPictures)</blue> --> <zero>Number0</zero> <one>Number1</one> <two>JumpSMS2</two> <three>JumpSMS3</three> <four>JumpSMS4</four> <five>JumpSMS5</five> <six>JumpSMS6</six> <seven>JumpSMS7</seven> <eight>JumpSMS8</eight> <nine>JumpSMS9</nine> <audio>AudioNextLanguage</audio> <subtitle>ShowSubtitles</subtitle> <enter>FullScreen</enter> <blue>ContextMenu</blue> <playlist>XBMC.ActivateWindow(MyMusicPlaylist)</playlist> </remote> </global> <Home> <remote> <menu>XBMC.Skin.ToggleSetting(HomeViewToggle)</menu> <info>XBMC.ActivateWindow(SystemInfo)</info> <clear>XBMC.ActivateWindow(Weather)</clear> <blue>XBMC.ActivateWindow(Settings)</blue> <red>FullScreen</red> <back>FullScreen</back> </remote> </Home> <MyFiles> <remote> <clear>Delete</clear> </remote> </MyFiles> <MyMusicPlaylist> <remote> <back>Playlist</back> <!-- Close playlist --> <clear>Delete</clear> </remote> </MyMusicPlaylist> <MyMusicPlaylistEditor> <remote> <zero>Queue</zero> </remote> </MyMusicPlaylistEditor> <MyMusicFiles> <remote> <zero>Queue</zero> <star>Queue</star> <start>ContextMenu</start> </remote> </MyMusicFiles> <MyMusicLibrary> <remote> <zero>Queue</zero> <star>Queue</star> </remote> </MyMusicLibrary> <FullscreenVideo> <remote> <back>FullScreen</back> <zero>Number0</zero> <one>Number1</one> <two>Number2</two> <three>Number3</three> <four>Number4</four> <five>Number5</five> <six>Number6</six> <seven>Number7</seven> <eight>Number8</eight> <nine>Number9</nine> <left>Rewind</left> <right>FastForward</right> <up>Play</up> <down>Pause</down> <yellow>StepForward</yellow> <green>StepBack</green> <blue>CodecInfo</blue> <menu>OSD</menu> <start>OSD</start> <info>XBMC.ActivateWindow(PVROSDChannels)</info> <title>XBMC.ActivateWindow(PVROSDChannels)</title> <display>AspectRatio</display> <select>Info</select> <teletext>XBMC.ActivateWindow(Teletext)</teletext> <channelplus>SkipNext</channelplus> <channelminus>SkipPrevious</channelminus> <record>XBMC.PlayerControl(Record)</record> </remote> </FullscreenVideo> <FullscreenInfo> <remote> <back>FullScreen</back> <left>Rewind</left> <right>FastForward</right> <up>Play</up> <down>Pause</down> <yellow>StepForward</yellow> <green>StepBack</green> <display>AspectRatio</display> <info>CodecInfo</info> <select>Close</select> <menu>OSD</menu> </remote> </FullscreenInfo> <PlayerControls> <remote> <back>Close</back> <menu>Close</menu> </remote> </PlayerControls> <Visualisation> <universalremote> <obc151>XBMC.ActivateWindow(MyMusicPlaylist)</obc151> </universalremote> <remote> <red>FullScreen</red> <yellow>AnalogSeekForward</yellow> <green>AnalogSeekBack</green> <blue>CodecInfo</blue> <left>Rewind</left> <right>FastForward</right> <pageplus>SkipNext</pageplus> <pageminus>SkipPrevious</pageminus> <up>Play</up> <down>Pause</down> <info>XBMC.ActivateWindow(PVROSDChannels)</info> <back>XBMC.ActivateWindow(MyMusicPlaylist)</back> <select>Info</select> <menu>XBMC.ActivateWindow(MusicOSD)</menu> <start>XBMC.ActivateWindow(MusicOSD)</start> </remote> </Visualisation> <MusicOSD> <remote> <back>Close</back> <menu>Close</menu> <start>Close</start> <info>CodecInfo</info> </remote> </MusicOSD> <VisualisationSettings> <remote> <back>Close</back> <menu>Close</menu> </remote> </VisualisationSettings> <VisualisationPresetList> <remote> <back>Close</back> <menu>Close</menu> </remote> </VisualisationPresetList> <SlideShow> <remote> <zero>ZoomNormal</zero> <one>ZoomLevel1</one> <two>ZoomLevel2</two> <three>ZoomLevel3</three> <four>ZoomLevel4</four> <five>ZoomLevel5</five> <six>ZoomLevel6</six> <seven>ZoomLevel7</seven> <eight>ZoomLevel8</eight> <nine>ZoomLevel9</nine> <info>CodecInfo</info> <pageplus>ZoomIn</pageplus> <pageminus>ZoomOut</pageminus> <select>Rotate</select> <up>Pause</up> <down>Play</down> <back>PreviousMenu</back> </remote> </SlideShow> <ScreenCalibration> <remote> <select>NextCalibration</select> <enter>NextCalibration</enter> <zero>ResetCalibration</zero> <display>NextResolution</display> <xbox>NextResolution</xbox> </remote> </ScreenCalibration> <GUICalibration> <remote> <select>NextCalibration</select> <enter>NextCalibration</enter> <zero>ResetCalibration</zero> </remote> </GUICalibration> <SelectDialog> <remote> <back>Close</back> </remote> </SelectDialog> <VideoOSD> <remote> <back>PreviousMenu</back> <menu>Close</menu> <start>Close</start> </remote> </VideoOSD> <VideoMenu> <remote> <menu>OSD</menu> <back>PreviousMenu</back> <info>Info</info> <title>CodecInfo</title> <zero>Number0</zero> <one>Number1</one> <two>Number2</two> <three>Number3</three> <four>Number4</four> <five>Number5</five> <six>Number6</six> <seven>Number7</seven> <eight>Number8</eight> <nine>Number9</nine> </remote> </VideoMenu> <OSDVideoSettings> <remote> <back>Close</back> <menu>Close</menu> <start>Close</start> </remote> </OSDVideoSettings> <OSDAudioSettings> <remote> <back>Close</back> <menu>Close</menu> <start>Close</start> </remote> </OSDAudioSettings> <VideoBookmarks> <remote> <back>Close</back> <menu>Close</menu> <start>Close</start> <zero>Delete</zero> </remote> </VideoBookmarks> <MyVideoLibrary> <remote> <zero>Queue</zero> <clear>Delete</clear> <green>ToggleWatched</green> <yellow>Queue</yellow> </remote> </MyVideoLibrary> <MyVideoFiles> <remote> <zero>Queue</zero> <star>Queue</star> <blue>ContextMenu</blue> <green>ToggleWatched</green> <yellow>Queue</yellow> </remote> </MyVideoFiles> <MyPictures> <remote> <zero>Queue</zero> <star>Queue</star> <start>ContextMenu</start> </remote> </MyPictures> <MyVideoPlaylist> <remote> <back>Playlist</back> <!-- Close playlist --> <clear>Delete</clear> <zero>Delete</zero> </remote> </MyVideoPlaylist> <VirtualKeyboard> <remote> <back>BackSpace</back> <star>Shift</star> <hash>Symbols</hash> <zero>Number0</zero> <one>Number1</one> <two>Number2</two> <three>Number3</three> <four>Number4</four> <five>Number5</five> <six>Number6</six> <seven>Number7</seven> <eight>Number8</eight> <nine>Number9</nine> <pageminus>CursorLeft</pageminus> <pageplus>CursorRight</pageplus> </remote> </VirtualKeyboard> <ContextMenu> <remote> <blue>Close</blue> <back>Close</back> </remote> </ContextMenu> <FileStackingDialog> <remote> <back>Close</back> </remote> </FileStackingDialog> <Scripts> <remote> <info>XBMC.ActivateWindow(ScriptsDebugInfo)</info> </remote> </Scripts> <ScriptsDebugInfo> <remote> <info>Info</info> <!-- clears debug python info --> </remote> </ScriptsDebugInfo> <NumericInput> <remote> <zero>Number0</zero> <one>Number1</one> <two>Number2</two> <three>Number3</three> <four>Number4</four> <five>Number5</five> <six>Number6</six> <seven>Number7</seven> <eight>Number8</eight> <nine>Number9</nine> <back>BackSpace</back> </remote> </NumericInput> <Weather> <remote> <back>PreviousMenu</back> </remote> </Weather> <Settings> <remote> <back>PreviousMenu</back> </remote> </Settings> <MyPicturesSettings> <remote> <back>PreviousMenu</back> </remote> </MyPicturesSettings> <MyProgramsSettings> <remote> <back>PreviousMenu</back> </remote> </MyProgramsSettings> <MyWeatherSettings> <remote> <back>PreviousMenu</back> </remote> </MyWeatherSettings> <MyMusicSettings> <remote> <back>PreviousMenu</back> </remote> </MyMusicSettings> <SystemSettings> <remote> <back>PreviousMenu</back> </remote> </SystemSettings> <MyVideosSettings> <remote> <back>PreviousMenu</back> </remote> </MyVideosSettings> <NetworkSettings> <remote> <back>PreviousMenu</back> </remote> </NetworkSettings> <AppearanceSettings> <remote> <back>PreviousMenu</back> </remote> </AppearanceSettings> <Profiles> <remote> <back>PreviousMenu</back> </remote> </Profiles> <systeminfo> <remote> <back>PreviousMenu</back> </remote> </systeminfo> <shutdownmenu> <remote> <back>PreviousMenu</back> </remote> </shutdownmenu> <submenu> <remote> <back>PreviousMenu</back> </remote> </submenu> <MusicInformation> <remote> <back>Close</back> </remote> </MusicInformation> <MovieInformation> <remote> <back>Close</back> </remote> </MovieInformation> <LockSettings> <remote> <menu>Close</menu> <back>PreviousMenu</back> </remote> </LockSettings> <ProfileSettings> <remote> <menu>Close</menu> <back>PreviousMenu</back> </remote> </ProfileSettings> <PictureInfo> <remote> <skipplus>NextPicture</skipplus> <skipminus>PreviousPicture</skipminus> <info>Close</info> <back>Close</back> </remote> </PictureInfo> <Teletext> <remote> <zero>number0</zero> <one>number1</one> <two>number2</two> <three>number3</three> <four>number4</four> <five>number5</five> <six>number6</six> <seven>number7</seven> <eight>number8</eight> <nine>number9</nine> <red>Red</red> <green>Green</green> <yellow>Yellow</yellow> <blue>Blue</blue> <info>Info</info> <back>Close</back> <menu>Close</menu> <start>Close</start> <teletext>Close</teletext> </remote> </Teletext> <Favourites> <remote> <back>Close</back> </remote> </Favourites> </keymap>
- remote.xml
7.30 dvd
7.30.1 tasks
- install libdvd-pkg, allow programs to eject optical media
--- # file: roles/dvd/tasks/main.yml #- name: preconfigure libdvd-pkg # shell: | # echo 'libdvd-pkg libdvd-pkg/post-invoke_hook-install boolean true' | debconf-set-selections # echo 'libdvd-pkg libdvd-pkg/build boolean true' | debconf-set-selections - name: apt | install libdvd-pkg apt: name: '{{ item }}' state: present install_recommends: no with_items: - 'libdvd-pkg' - name: configure package libdvd-pkg debconf: name: 'libdvd-pkg' question: '{{ item }}' vtype: boolean value: true with_items: - 'libdvd-pkg/post-invoke_hook-install' - 'libdvd-pkg/build boolean' notify: ['Reconfigure unattended upgrades with dpkg'] - name: change udev rule to allow KODI to eject optical disks shell: sed 's/--lock-media //' /lib/udev/rules.d/60-cdrom_id.rules > /etc/udev/rules.d/60-cdrom_id.rules args: creates: /etc/udev/rules.d/60-cdrom_id.rules
7.31 template-test
--- - name: show vars debug: var: '{{ system }}' - name: test templates template: src: templates/test.j2 dest: /tmp/test.txt
{{ ansible_managed | comment }}
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
{% if system.x11.dualhead.enabled %}
Screen 1 "Screen1" RightOf "Screen0"
{% endif %}
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
# ignore devices with eventlircd tag
# ENV{ID_INPUT.tags}+="eventlircd"
# must be set by an udev rule
Section "InputClass"
Identifier "ignore eventlircd devices"
MatchTag "eventlircd"
Option "Ignore" "True"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
{% if system.x11.display.0.default == "VGA2Scart_4_3" or system.x11.display.0.default == "VGA2Scart_16_9" %}
HorizSync 14-17
VertRefresh 49-61
{% if system.x11.display.0.default == "VGA2Scart_4_3" %}
Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace
{% elif system.x11.display.0.default == "VGA2Scart_16_9" %}
Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace
{% endif %}
{% endif %}
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
EndSection
{% if system.x11.dualhead.enabled == "1" %}
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Unknown"
{% if system.x11.display.1.default in ("VGA2Scart_4_3", "VGA2Scart_16_9") %}
HorizSync 14-17
VertRefresh 49-61
{% if system.x11.display.1.default == "VGA2Scart_4_3" %}
Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace
{% elif system.x11.display.1.default == "VGA2Scart_16_9" %}
Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace
{% endif %}
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
{% endif %}
EndSection
{% endif %}
Section "Device"
Identifier "Device0"
{% if system.hardware.nvidia.detected %}
Driver "nvidia"
VendorName "NVIDIA Corporation"
{% endif %}
Screen 0
Option "DPI" "100x100"
{% if system.hardware.nvidia.busid %}
BusID "PCI: {{ system.hardware.nvidia.busid }}"
{% endif %}
Option "NoLogo" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "False"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "DynamicTwinView" "0"
Option "OnDemandVBlankinterrupts" "on"
Option "FlatPanelProperties" "Scaling = Native"
EndSection
{% if system.x11.dualhead.enabled == "1" %}
Section "Device"
Identifier "Device1"
{% if system.hardware.nvidia.detected %}
Driver "nvidia"
VendorName "NVIDIA Corporation"
{% endif %}
Screen 1
{% if system.hardware.nvidia.busid %}
BusID "PCI: {{ system.hardware.nvidia.busid }}"
{% endif %}
Option "NoLogo" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "False"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "DynamicTwinView" "0"
EndSection
{% endif %}
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
{% if system.x11.display.0.default is defined and system.x11.display.0.default %}
Modes "{{ system.x11.display.0.default }}"{% for mode in system.x11.display.0.mode %}{% if mode != system.x11.display.0.default %} "{{ mode }}"{% endif %}{% endfor %}
{% elif system.hardware.nvidia.detected == 1 %}
Modes "nvidia-auto-select"
{% endif %}
EndSubSection
{% if system.x11.display.0.default or system.x11.default %}
{% if system.x11.display.0.device is definded and system.x11.display.0.device %}
Option "ConnectedMonitor" {{ system.x11.display.0.device }}
{% else %}
Option "ConnectedMonitor" {{ system.x11.default }}
{% endif %}
# Option "ConnectedMonitor" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?><?cs if:(?system.x11.dualhead.enabled && system.x11.dualhead.enabled == 1) ?>, <?cs call:fix_display_name(system.x11.display.1.device) ?><?cs /if ?>"
#Option "ConnectedMonitor"
"<?cs if:(?system.x11.display.0.device) ?>
<?cs call:fix_display_name(system.x11.display.0.device) ?>
<?cs else ?>
<?cs var:system.x11.default ?>
<?cs /if ?>
<?cs if:(?system.x11.dualhead.enabled && system.x11.dualhead.enabled == 1) ?>, <?cs call:fix_display_name(system.x11.display.1.device) ?><?cs /if ?>"
# Option "UseDisplayDevice" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?>"
# <?cs /if ?>
# <?cs if:(?system.hardware.nvidia.0.edid && system.hardware.nvidia.0.edid == "1") ?>
# Option "CustomEDID" "<?cs call:fix_display_name(system.x11.display.0.device) ?>:/etc/X11/edid.0.yavdr"
# <?cs /if ?>
# <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.0.device) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:system.x11.display.0.default ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }"
# <?cs each:mode = system.x11.display.0.mode ?><?cs if:(mode != system.x11.display.0.default) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?>
{% endif %}
EndSection
{% if system.x11.dualhead.enabled == "1" %}
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
{% if system.x11.display.0.default is defined and system.x11.display.0.default %}
Modes "{{ system.x11.display.1.default }}"{% for mode in system.x11.display.1.mode %}{% if mode != system.x11.display.1.default %} "{{ mode }}"{% endif %}{% endfor %}
{% elif system.hardware.nvidia.detected == "1" %}
Modes "nvidia-auto-select"
{% endif %}
EndSubSection
# <?cs if:(?system.x11.display.1.default && system.x11.display.1.default != "" && system.x11.display.1.default != "disabled") ?>
# Option "UseDisplayDevice" "<?cs call:fix_display_name(system.x11.display.1.device) ?>"
# <?cs /if ?>
# <?cs if:(?system.hardware.nvidia.1.edid && system.hardware.nvidia.1.edid == "1") ?>
# Option "CustomEDID" "<?cs call:fix_display_name(system.x11.display.1.device) ?>:/etc/X11/edid.1.yavdr"
# <?cs /if ?>
# <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.1.device) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:system.x11.display.1.default ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }"
# <?cs each:mode = system.x11.display.1.mode ?><?cs if:(mode != system.x11.display.1.default) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?>
# <?cs /if ?>
EndSection
{% endif %}
{% if not system.x11.use_compositing %}
Section "Extensions"
# if not open-gl OSD is needed (e.g. for vdr-sxfe):
Option "Composite" "Disable"
EndSection
{% endif %}
foo: - bar - baz - spam system: hardware: nvidia: detected: "1" busid: "000:2304:234" x11: dualhead: enabled: "0" display: 0: mode: - "1920x1080_50" default: "nvidia-auto" 1: mode: - "1280x720_60"
7.32 wakeup
7.32.1 defaults
--- # file roles/wakeup/defaults/main.yml wakeup_method: "acpiwakeup"
7.32.2 tasks
--- # file roles/wakeup/tasks/main.yml - name: install and configure vdr-addon-acpiwakeup apt: name: vdr-addon-acpiwakeup state: present when: wakeup_method == "acpiwakeup" - name: expand template for /etc/vdr/vdr-addon-acpiwakeup.conf template: src: templates/vdr-addon-acpiwakeup.conf.j2 dest: /etc/vdr/vdr-addon-acpiwakeup.conf
7.32.3 templates
{{ ansible_managed | comment }} # Activate/deactivate ACPIWakeup with yes/no: ACPI_ENABLED="{% if wakeup_method == 'acpiwakeup' %}yes{% else %}no{% endif %}" # How many minutes should the machine wake up before the timer starts: ACPI_START_AHEAD=5 # If you want your VDR machine to wakeup in regular intervals (i.e. for # updating EPG data), specify the days of the week and the wakeup time. # # Days of the week for regular wakeup (not set=Disabled, 1=Monday...7=Sunday) # ACPI_REGULAR_DAYS="1 2 3 4 5 6 7" # Wakeup time #ACPI_REGULAR_TIME=01:00 # HH:MM
7.33 grub-config
7.33.1 default variables
system: shutdown: poweroff grub: timeout: 0 boot_options: quiet nosplash
7.33.2 tasks
--- - name: custom grub configuration for timeout and reboot halt template: src: templates/50_custom.j2 dest: /etc/grub.d/50_custom mode: '0775' notify: [ 'Update GRUB' ] # TODO: add special case if plymouth is used - name: let the system boot quietly lineinfile: dest: /etc/default/grub state: present regexp: '^(GRUB_CMDLINE_LINUX_DEFAULT=")' line: '\1{{ grub.boot_options}}"' backrefs: yes notify: [ 'Update GRUB' ]
7.33.3 templates
#!/bin/sh exec tail -n +3 $0 # This file is configured by the ansible configuration for yaVDR {% if system.shutdown is defined and system.shutdown == 'reboot' %} menuentry "PowerOff" { halt } {% endif %} if [ "${recordfail}" = 1 ]; then set timeout={{ 3 if grub.timeout < 3 else grub.timeout }} else set timeout={{ grub.timeout if grub.timeout is defined else 0 }} fi
7.33.4 handlers
--- - name: Update GRUB command: update-grub failed_when: ('error' in grub_register_update.stderr) register: grub_register_update # TODO: Do we need to use grub-set-default? # https://github.com/yavdr/yavdr-utils/blob/master/events/actions/update-grub
8 Modules
This section contains custom modules for the yaVDR Playbooks. They are used to collect facts about the system and configure applications and daemons.
8.1 hardware_facts.py
# This Module collects the vendor- and device ids for USB- and PCI(e)-devices and currently loaded kernel modules. DOCUMENTATION = ''' --- module: hardware_facts short_description: collects facts for kernel modules, usb and pci devices description: - This Module collects the vendor- and device ids for USB- and PCI(e)-devices and currently loaded kernel modules. options: usb: required: False default: True description: - return a list of vendor- and device ids for usb devices in '04x:04x' notation pci: required: False default: True description: - return a list of vendor- and device ids for pci devices in '04x:04x' notation modules: required: False default: True description: - return a list of currently loaded kernel modules gpus: required: False default: True description: - return a list of devices of the pci gpu class (0x030000) acpi_power_modes: required: False default: True description: - return a list of supported acpi power saving modes notes: - requres python-pyusb and python-kmodpy requirements: [ ] author: "Alexander Grothe <seahawk1986@gmx.de>" ''' EXAMPLES = ''' - name: get information about usb and pci hardware and loaded kernel modules hardware_facts: usb: True pci: True modules: True acpi_power_modes: True - debug: var: usb - debug: var: pci - debug: var: modules - debug: var: gpus ''' import glob import json import os import sys import usb.core from collections import namedtuple import kmodpy from ansible.module_utils.basic import * PCIDevice = namedtuple("PCIDevice", 'idVendor idProduct idClass pciPath') vendor_dict = { 0x10de: 'nvidia', 0x8086: 'intel', 0x1002: 'amd', 0x80ee: 'virtualbox', } def get_pci_devices(): for device in glob.glob('/sys/devices/pci*/*:*:*/*:*:*/'): try: with open(os.path.join(device, 'device')) as d: product_id = int(d.read().strip(), 16) with open(os.path.join(device, 'vendor')) as d: vendor_id = int(d.read().strip(), 16) with open(os.path.join(device, 'class')) as d: class_id = int(d.read().strip(), 16) yield PCIDevice(idVendor=vendor_id, idProduct=product_id, idClass=class_id, pciPath=device) except IOError: pass def format_device_list(iterator): return ["{:04x}:{:04x}".format(d.idVendor, d.idProduct) for d in iterator] def format_gpu_device_list(iterator): def get_entries(iterator): for d in iterator: if d.idClass == 0x030000: yield {"VendorName": vendor_dict.get(d.idVendor, "unknown"), "VendorID": d.idVendor, "ProductID": d.idProduct} return [entry for entry in get_entries(iterator)] def list_acpi_power_modes(): acpi_power_modes = [] try: with open('/sys/power/state') as f: acpi_power_modes = [l for l in f.readline().split()] except IOError: pass return acpi_power_modes arg_specs = { 'usb': dict(default=True, type='bool', required=False), 'pci': dict(default=True, type='bool', required=False), 'modules': dict(default=True, type='bool', required=False), 'gpus': dict(default=True, type='bool', required=False), 'acpi_power_modes': dict(default=True, type='bool', required=False), } def main(): module = AnsibleModule(argument_spec=arg_specs, supports_check_mode=True,) collect_usb = module.params['usb'] collect_pci = module.params['pci'] collect_modules = module.params['modules'] collect_gpus = module.params['gpus'] collect_acpi_power_modes = module.params['acpi_power_modes'] usb_devices = [] pci_devices = [] modules = [] gpus = [] nvidia_detected = False intel_detected = False amd_detected = False virtualbox_detected = False acpi_power_modes = [] if collect_usb: usb_devices = format_device_list(usb.core.find(find_all=True)) if collect_pci: pci_devices = format_device_list(get_pci_devices()) if collect_modules: k = kmodpy.Kmod() modules = [m[0] for m in k.loaded()] if collect_gpus: gpus = format_gpu_device_list(get_pci_devices()) nvidia_detected = any((True for gpu in gpus if gpu['VendorName'] == 'nvidia')) intel_detected = any((True for gpu in gpus if gpu['VendorName'] == 'intel')) amd_detected = any((True for gpu in gpus if gpu['VendorName'] == 'amd')) virtualbox_detected = any((True for gpu in gpus if gpu['VendorName'] == 'virtualbox')) if collect_acpi_power_modes: acpi_power_modes = list_acpi_power_modes() data = {'usb': usb_devices, 'pci': pci_devices, 'modules': modules, 'gpus': gpus, 'acpi_power_modes': acpi_power_modes, 'nvidia_detected': nvidia_detected, 'intel_detected': intel_detected, 'amd_detected': amd_detected, 'virtualbox_detected': virtualbox_detected} module.exit_json(changed=False, ansible_facts=data, msg=data) if __name__ == '__main__': main()
8.2 satip_facts.py
DOCUMENTATION = ''' --- module: hardware_facts short_description: "check if at least one SAT>IP server responds on the network" description: - This script sends a multicast message and awaits responses by Sat>IP servers. Returns a list of detected SAT>IP servers with their name and capabilites. ''' EXAMPLES = ''' - name: "detect SAT>IP Server on the network" action: satip_facts - debug: var: satip_devices ''' import json import socket import sys import time import xml.etree.ElementTree as ET import requests from contextlib import contextmanager from ansible.module_utils.basic import * SSDP_BIND = "0.0.0.0" SSDP_ADDR = "239.255.255.250" SSDP_PORT = 1900 # SSDP_MX = max delay for server response # a value of 2s is recommended by the SAT>IP specification 1.2.2 SSDP_MX = 2 SSDP_ST = "urn:ses-com:device:SatIPServer:1" ssdpRequest = "\r\n".join(( "M-SEARCH * HTTP/1.1", "HOST: %s:%d" % (SSDP_ADDR, SSDP_PORT), "MAN: \"ssdp:discover\"", "MX: %d" % (SSDP_MX), "ST: %s" % (SSDP_ST), "\r\n")) @contextmanager def socket_manager(*args, **kwargs): """provide a context manager for socket""" sock = socket.socket(*args, **kwargs) sock.setblocking(False) sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 2) sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) try: sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1) except socket.error: pass sock.settimeout(SSDP_MX + 0.5) sock.bind((SSDP_BIND, SSDP_PORT)) try: yield sock finally: sock.close() def parse_satip_xml(data): """ Parse SAT>IP XML data. Args: data (str): XML input data.. Returns: dict: Parsed SAT>IP device name and frontend information. """ result = {'name': '', 'frontends': {}} if data: root = ET.fromstring(data) name = root.find('.//*/{urn:schemas-upnp-org:device-1-0}friendlyName') result['name'] = name.text satipcap = root.find('.//*/{urn:ses-com:satip}X_SATIPCAP') if satipcap is None: raise ValueError("Invalid SAT>IP device description") caps = {} for system in satipcap.text.split(","): cap = system.split("-") if cap: count = int(cap[1]) if cap[0] in caps: count = count + caps[cap[0]] caps[cap[0]] = count result['frontends'] = caps return result def main(): description_urls = [] device_list = [] module = AnsibleModule(argument_spec={}, supports_check_mode=True,) with socket_manager(socket.AF_INET, socket.SOCK_DGRAM) as sock: # according to Sat>IP Specification 1.2.2, p. 20 # a client should send three requests within 100 ms with a ttl of 2 for _ in range(3): sock.sendto(ssdpRequest, (SSDP_ADDR, SSDP_PORT)) time.sleep(0.03) try: response = sock.recv(1024) if response and "SERVER:" in response: for line in response.splitlines(): if "LOCATION" in line: url = line.split()[-1].strip() if url not in description_urls: description_urls.append(url) info = requests.get(url, timeout=2) device_list.append(parse_satip_xml(info.text)) else: raise ValueError('No satip server detected') except (socket.timeout, ValueError, ET.ParseError): pass module.exit_json(changed=False, ansible_facts={'satip_devices': device_list}) if __name__ == '__main__': main()
8.3 xrandr_facts.py
[ ]support multiple screens (-d :0.0 .. :0.n)
from __future__ import print_function import ast import binascii import csv import re import subprocess from collections import namedtuple from ansible.module_utils.basic import * DOCUMENTATION = ''' --- module: xrandr_facts short_description: "gather facts about connected monitors and available modelines" description: - This module needs a running x-server on a given display in order to successfully call xrandr. Returns the dictionary "xrandr", wich contains all screens with output states, connected displays, EDID info and their modes and a recommendation for the best fitting tv mode. options: display: required: False default: ":0" description: - the DISPLAY variable to use when calling xrandr preferred_outputs: required: False default: ["HDMI", "DP", "DVI", "VGA", "TV"] description: - ranking of the preferred display connectors preferred_refreshrates: required: False default: ["50", "60", "75", "30", "25"] description: - ranking of the preferred display refreshrate preferred_resolutions: required: False default: ["7680x4320", "3840x2160", "1920x1080", "1280x720", "720x576"] description: - ranking of the preferred display resolutions write_edids: required: False default: True description: - write edid data to /etc/X11/edid.{connector}.bin ''' EXAMPLES = ''' - name: "collect facts for connected displays" action: xserver_facts display: ":0" - debug: var: xrandr - debug: var: xorg ''' ARG_SPECS = { 'display': dict(default=":0", type='str', required=False), 'preferred_outputs': dict( default=["HDMI", "DP", "DVI", "VGA", "TV"], type='list', required=False), 'preferred_refreshrates': dict( default=[50, 60, 75, 30, 25], type='list', required=False), 'preferred_resolutions': dict( default=[ "7680x4320", "3840x2160", "1920x1080", "1280x720", "720x576"], type='list', required=False), 'write_edids': dict(default=True, type='bool', required=False), } SCREEN_REGEX = re.compile("^(?P<screen>Screen\s\d+:)(?:.*)") CONNECTOR_REGEX = re.compile( "^(?P<connector>.*-\d+)\s(?P<connection_state>connected|disconnected)\s(?P<primary>primary)?") MODE_REGEX = re.compile("^\s+(?P<resolution>\d{3,}x\d{3,}).*") Mode = namedtuple('Mode', ['connection', 'resolution', 'refreshrate']) def check_for_screen(line): """check line for screen information""" match = re.match(SCREEN_REGEX, line) if match: return match.groupdict()['screen'] def check_for_connection(line): """check line for connection name and state""" match = re.match(CONNECTOR_REGEX, line) connector = None is_connected = False if match: match = match.groupdict() connector = match['connector'] is_connected = True if match['connection_state'] == 'connected' else False return connector, is_connected def get_indentation(line): """return the number of leading whitespace characters""" return len(line) - len(line.lstrip()) def sort_mode(mode): """rate modes by several criteria""" connection_score = 0 rrate_score = 0 resolution_score = 0 preferred_rrates = module.params['preferred_refreshrates'] # [50, 60] preferred_resolutions = module.params['preferred_resolutions'] # ["7680x4320", "3840x2160", "1920x1080", "1280x720", "720x576"] preferred_outputs = module.params['preferred_outputs'] # ["HDMI", "DP", "DVI", "VGA"] if mode.refreshrate in preferred_rrates: rrate_score = len(preferred_rrates) - preferred_rrates.index(mode.refreshrate) if mode.resolution in preferred_resolutions: resolution_score = len(preferred_resolutions) - preferred_resolutions.index(mode.resolution) x_resolution, y_resolution = (int(n) for n in mode.resolution.split('x')) connection = mode.connection.split('-')[0] if connection in preferred_outputs: connection_score = len(preferred_outputs) - preferred_outputs.index(connection) return (rrate_score, resolution_score, x_resolution, y_resolution, connection_score) def parse_xrandr_verbose(iterator): """parse the output of xrandr --verbose using an iterator delivering single lines""" xorg = {} is_connected = False for line in iterator: if line.startswith('Screen'): screen = check_for_screen(line) xorg[screen] = {} elif 'connected' in line: connector, is_connected = check_for_connection(line) xorg[screen][connector] = { 'is_connected': is_connected, 'EDID': '', 'modes': {}, 'preferred': '', 'current': '', 'auto': '', } elif is_connected and 'EDID:' in line: edid_str = "" outer_indentation = get_indentation(line) while True: line = next(iterator) if get_indentation(line) > outer_indentation: edid_str += line.strip() else: break xorg[screen][connector]['EDID'] = edid_str elif is_connected and "MHz" in line and not "Interlace" in line: match = re.match(MODE_REGEX, line) if match: match = match.groupdict() preferred = bool("+preferred" in line) current = bool("*current" in line) while True: line = next(iterator) if line.strip().startswith('v:'): refresh_rate = ast.literal_eval(line.split()[-1][:-2]) rrate = int(round(refresh_rate)) if xorg[screen][connector]['modes'].get(match['resolution']) is None: xorg[screen][connector]['modes'][match['resolution']] = [] if rrate not in xorg[screen][connector]['modes'][match['resolution']]: xorg[screen][connector]['modes'][match['resolution']].append(rrate) if preferred: xorg[screen][connector]['preferred'] = "{}_{}".format( match['resolution'], rrate) if current: xorg[screen][connector]['current'] = "{}_{}".format( match['resolution'], rrate) break return xorg def parse_edid_data(edid): vendor = "Unknown" model = "Unknown" data = subprocess.check_output("parse-edid < {}".format(edid), shell=True, universal_newlines=True) for line in data.splitlines(): if "VendorName" in line: vendor = line.strip().split('"')[1] if "ModelName" in line: model = line.strip().split('"')[1] return vendor, model def collect_nvidia_data(): BusID_RE = re.compile(( '(?P<domain>[0-9a-fA-F]+)' ':' '(?P<bus>[0-9a-fA-F]+)' ':' '(?P<device>[0-9a-fA-F]+)' '\.' '(?P<function>[0-9a-fA-F]+)' )) try: data = subprocess.check_output(["nvidia-smi", "--query-gpu=name,pci.bus_id", "--format=csv", "-i0"], universal_newlines=True) except subprocess.CalledProcessError: pass except OSError: # nvidia-smi is not installed pass else: for row in csv.DictReader(data.splitlines(), delimiter=',', skipinitialspace=True): name = row['name'] bus_id = row['pci.bus_id'] # pci.bus_id structure as reported by nvidia-smi: "domain:bus:device.function", in hex. match = BusID_RE.search(bus_id) if match: domain, bus, device, function = (int(n, 16) for n in match.groups()) bus_id = "PCI:{:d}@{:d}:{:d}:{:d}".format(bus, domain, device, function) return name, bus_id raise ValueError def output_data(data, write_edids=True): if data: modes = [] for _, screen_data in data.items(): for connector, connection_data in screen_data.items(): if connection_data.get('EDID') and write_edids: with open('/etc/X11/edid.{}.bin'.format(connector), 'wb') as edid: edid.write(binascii.a2b_hex(connection_data['EDID'])) for resolution, refreshrates in connection_data['modes'].items(): for refreshrate in refreshrates: modes.append(Mode(connector, resolution, refreshrate)) if modes: result = {} try: gpu_name, bus_id = collect_nvidia_data() except ValueError: gpu_name = None bus_id = None def create_entry(my_dict, name, connector, resolution, refreshrate, vendor, model): my_dict[name] = { 'connector': connector, 'resolution': resolution, 'refreshrate': refreshrate, 'edid': '/etc/X11/edid.{}.bin'.format(connector), 'mode': "{}_{}".format(resolution, refreshrate), 'vendor': vendor, 'model': model, } if gpu_name and bus_id: result[name]['gpu_name'] = gpu_name result[name]['bus_id'] = bus_id connector_0, resolution_0, refreshrate_0 = max(modes, key=sort_mode)[:3] vendor_0, model_0 = parse_edid_data('/etc/X11/edid.{}.bin'.format(connector_0)) create_entry(result, 'primary', connector_0, resolution_0, refreshrate_0, vendor_0, model_0) # check if additional monitors exist other_modes = [mode for mode in modes if mode[0] != connector_0] if other_modes: connector_1, resolution_1, refreshrate_1 = max(other_modes, key=sort_mode)[:3] vendor_1, model_1 = parse_edid_data('/etc/X11/edid.{}.bin'.format(connector_1)) create_entry(result, 'secondary', connector_1, resolution_1, refreshrate_1, vendor_1, model_1) #print(json.dumps(data, sort_keys=True, indent=4)) module.exit_json(changed=True if write_edids else False, ansible_facts={'xrandr': data, 'xorg': result}) if __name__ == '__main__': module = AnsibleModule(argument_spec=ARG_SPECS, supports_check_mode=False,) try: d = subprocess.check_output(['xrandr', '-d', module.params['display'], '--verbose'], universal_newlines=True).splitlines() except subprocess.CalledProcessError: xorg_data = {} else: xorg_data = parse_xrandr_verbose(iter(d)) output_data(xorg_data, module.params['write_edids'])
9 Handlers
- name: Reconfigure unattended upgrades with dpkg command: '/usr/sbin/dpkg-reconfigure --frontend noninteractive unattended-upgrades' - name: Trigger Udev command: 'udevadm trigger ' - name: Restart Samba systemd: name: smbd.service state: restarted enabled: yes #masked: no register: samba_reload - name: Restart NFS Kernel Server systemd: name: nfs-server.service state: restarted enabled: yes #masked: no register: nfs_reload - name: Restart VDR systemd: name: vdr.service state: restarted enabled: yes register: vdr_restart - name: Stop VDR systemd: name: vdr.service state: stopped enabled: yes register: vdr_stop - name: Start VDR systemd: name: vdr.service state: started enabled: yes register: vdr_start - name: Stop xlogin systemd: name: xlogin@vdr.service state: stopped enabled: yes register: xlogin_stop - name: Start xlogin systemd: daemon_reload: yes name: 'xlogin@{{ vdr.user }}' enabled: yes state: started register: xlogin_start - name: Stop x systemd: name: x@vt7.service state: stopped register: x_stop