Ralph Metzler
bc2e1a39ff
add tsspeed override
2018-08-10 08:47:29 +02:00
Julian Scheel
6089b4f5c2
wip: stv0910: Adapt symbolrate in blindscan mode
...
The blindscan mode searches for a symbolrate-range of +/-25% around the
given start value. To ensure that the highes scanned symbolrate could be
received at all the frontend must be configured to set the
basebandfilter for this symbolrate. Thus increase the symbolrate which
is given to the frontend by 25%.
2018-07-28 14:12:59 +02:00
Julian Scheel
8521ce4753
wip: stv0910: Add blindscan mode
...
Allow to use the AEP blind scan mode, which autodetects symbol rate
within a +/-25% range of the given symbol rate. Currently this is
enabled by using the lsb of symbol rate as a flag. This is hackish and
shall better be replaced by a dedicated dtv property.
2018-07-28 12:47:18 +02:00
Ralph Metzler
186ba6d414
change clock phase to prevent cross-talk on some hardware
...
(this value is better than the previously suggested change to 0xe0)
2018-07-18 09:41:24 +02:00
Ralph Metzler
d13416157c
remove unused offs
2018-05-28 16:40:02 +02:00
Ralph Metzler
755f502602
set array size to 4
2018-05-28 16:39:42 +02:00
Ralph Metzler
a05d1852a3
Set modulation to QPSK for DVB-S
...
Signed-off-by: Julian Scheel <julian@jusst.de>
2018-05-28 16:39:21 +02:00
Ralph Metzler
d0f7b9be1f
uncomment send_burst for legacy hardware and replace some register setting
...
functions with new version.
2018-03-28 19:47:26 +02:00
Ralph Metzler
6b0feea253
add ULL
2018-03-28 19:46:31 +02:00
Ralph Metzler
3db30defab
use correct MODULE_LINCESE for GPL v2 only according to notice in header
2018-03-22 19:32:17 +01:00
Ralph Metzler
991393950b
use svalue instead if uvalue for signed values
2018-02-12 22:47:31 +01:00
Ralph Metzler
642a010be6
make get_frontend report current DVB-S2 roll-off
2018-01-16 23:53:13 +01:00
Ralph Metzler
4f136e5659
change pls to official scrambling_sequence_index
2018-01-16 23:50:40 +01:00
Ralph Metzler
2eb3b3e723
add init values for TSINSDELM/L
2018-01-02 19:58:33 +01:00
Ralph Metzler
23826d9981
increase TS output speed for parallel connections
2017-12-27 22:17:36 +01:00
Ralph Metzler
d87246de12
throw a warning on double unlocks
...
based on patch by Daniel Scheller
2017-12-12 10:19:52 +01:00
Ralph Metzler
3b44e78bd0
Move get_cur_symbol_rate call to get_frontend()
2017-12-12 01:38:22 +01:00
Ralph Metzler
b814026565
- simplify init_search_param() with new register access functions
...
- add stream id 0x80000000 to set streaming mode
2017-12-05 19:57:08 +01:00
Ralph Metzler
ca3c26808f
simply enable_puncture_rate
2017-10-27 13:11:11 +02:00
Ralph Metzler
9e5576c562
add field and register reading/writing macros
2017-10-25 23:13:26 +02:00
Ralph Metzler
021eae2eac
simplify i2c functions
2017-10-25 23:07:43 +02:00
Ralph Metzler
8fa925317c
fix typo: 0190 instead of 0910
2017-10-16 11:25:05 +02:00
Ralph Metzler
6bdfe43958
remove accidentally committed test code
2017-10-03 20:49:45 +02:00
Ralph Metzler
83000cd73a
handle gate control errors
2017-10-02 00:54:53 +02:00
Ralph Metzler
1c22a07eaa
adapt dvb-core, includes and affected files to mainline 4.14-rc2
2017-09-26 22:09:05 +02:00
Ralph Metzler
4765eac57a
optimize stat checks and only allow stat checks once a second
2017-09-20 21:00:21 +02:00
Ralph Metzler
92b64711ec
strict checkpatch style adjustments
2017-09-16 15:31:52 +02:00
Ralph Metzler
df4f23384b
lower lowest symbol rate to 100000
2017-08-25 23:30:28 +02:00
Ralph Metzler
d3ca949ec5
wrong bitmask for compatibility mode
2017-07-29 14:47:57 +02:00
Ralph Metzler
7222bd58b3
change lock check order
2017-07-11 20:37:38 +02:00
Ralph Metzler
f404b3fb6d
add multi-stream capability announcement
2017-07-11 20:36:52 +02:00
Ralph Metzler
de34e2ebbd
correct array access
2017-07-11 20:29:20 +02:00
Ralph Metzler
c56f593a4c
add support for single demod mode for testing high bit rates
2017-02-06 12:48:48 +01:00
Ralph Metzler
a4c275895d
missing init for status
2016-09-05 14:25:43 +02:00
mvoelkel
4f452819df
Set input IQ swap to match hardware, fiexes sign issue with offset
2016-08-31 18:46:07 +02:00
Ralph Metzler
a1221c6e4e
always interpret pls code as gold code
2016-07-31 21:39:20 +02:00
Ralph Metzler
2c8fcc1df5
change physical layer scrambling API to DTV_PLS and support old API
...
mixed with DTV_STREAM_ID
2016-06-16 15:42:18 +02:00
Ralph Metzler
8908df8098
add support for DVB-S2 scrambling code and ISI
2016-06-08 12:13:16 +02:00
Ralph Metzler
80e0750c71
adapt to latest windows driver version
2016-05-31 17:01:46 +02:00
mvoelkel
a8d5d5b50d
stv0910 fixed typo in get frequency offset
2016-05-10 11:49:09 +02:00
Ralph Metzler
535ffa6ca6
show tuning offset
2016-05-03 22:05:18 +02:00
Ralph Metzler
1b0df5fcfa
octopro fixes
2016-05-02 16:27:32 +02:00
mvoelkel
6d80791077
increase transportstream speed on stv0910
2016-04-11 18:26:21 +02:00
Ralph Metzler
c18503fcad
fix stv0910 strength and snr values
2016-04-11 18:25:29 +02:00
Ralph Metzler
906efafd5e
correct signal strength
2016-04-11 18:25:07 +02:00
Ralph Metzler
1b0e822b07
more status API support
2016-04-11 18:24:32 +02:00
Ralph Metzler
829929a41f
cine s2 v7 has TS lines crossed
2015-12-10 18:26:45 +01:00
mvoelkel
9e2128c4fb
initial commit from dddvb-0.9.19c
2015-08-05 17:22:42 +02:00
