mirror of
https://github.com/hyperion-project/hyperion.ng.git
synced 2023-10-10 13:36:59 +02:00
amlogic docu update
Former-commit-id: a0293a6becf58fa9a0ee5d7162ba4d8f6b9e189d
This commit is contained in:
brindosch
parent
1e5f3cdd4a
commit
77996fd65a
@ -29,6 +29,8 @@ cmake -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
|
||||
cmake -DENABLE_WS2812BPWM=ON -DENABLE_WS281XPWM=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
|
||||
# or if you are not compiling on the raspberry pi (e.g. OrangePi) and need to disable the Dispmanx grabber and support for spi devices
|
||||
cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_X11=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
|
||||
# on amlogic platforms
|
||||
cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_AMLOGIC=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
|
||||
# as an alternative for the dispmanx grabber on non-rpi devices (e.g. cubox-i) you could try the framebuffer grabber
|
||||
cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_FB=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
|
||||
# for OSX build you need XCode, qt4 libraries and cmake (maybe libusb too). You can use macport or homebrew(recommended) to install them:
|
||||
|
||||
@ -1,287 +0,0 @@
|
||||
#!/bin/sh
|
||||
# Script for downloading and installing the latest Hyperion beta
|
||||
|
||||
# Make sure /sbin is on the path (for service to find sub scripts)
|
||||
PATH="/sbin:$PATH"
|
||||
|
||||
#Check which arguments are used
|
||||
if [ "$1" = "HyperConInstall" ] || [ "$2" = "HyperConInstall" ]; then
|
||||
HCInstall=1
|
||||
else HCInstall=0
|
||||
fi
|
||||
|
||||
#Check, if script is running as root
|
||||
if [ $(id -u) != 0 ]; then
|
||||
echo '---> Critical Error: Please run the script as root (sudo sh ./install_hyperion_beta.sh) -> abort'
|
||||
exit 1
|
||||
fi
|
||||
|
||||
#Welcome message
|
||||
echo '*******************************************************************************'
|
||||
echo 'This script will install/update to the latest Hyperion BETA'
|
||||
echo 'Created by brindosch - hyperion-project.org - the official Hyperion source.'
|
||||
echo '*******************************************************************************'
|
||||
|
||||
# Find out if we are on OpenElec / OSMC / Raspbian
|
||||
OS_OPENELEC=`grep -m1 -c OpenELEC /etc/issue`
|
||||
OS_OSMC=`grep -m1 -c OSMC /etc/issue`
|
||||
OS_RASPBIAN=`grep -m1 -c 'Raspbian\|RetroPie' /etc/issue`
|
||||
|
||||
# Find out which device this script runs on
|
||||
CPU_RPI=`grep -m1 -c 'BCM2708\|BCM2709\|BCM2710' /proc/cpuinfo`
|
||||
CPU_IMX6=`grep -m1 -c i.MX6 /proc/cpuinfo`
|
||||
CPU_WETEK=`grep -m1 -c Amlogic /proc/cpuinfo`
|
||||
CPU_X32X64=`uname -m | grep 'x86_32\|i686\|x86_64' | wc -l`
|
||||
# Check that we have a known configuration
|
||||
if [ $CPU_RPI -ne 1 ] && [ $CPU_IMX6 -ne 1 ] && [ $CPU_WETEK -ne 1 ] && [ $CPU_X32X64 -ne 1 ]; then
|
||||
echo '---> Critical Error: CPU information does not match any known releases -> abort'
|
||||
exit 1
|
||||
fi
|
||||
|
||||
#Check which RPi we are one (in case)
|
||||
RPI_1=`grep -m1 -c BCM2708 /proc/cpuinfo`
|
||||
RPI_2=`grep -m1 -c BCM2709 /proc/cpuinfo`
|
||||
RPI_3=`grep -m1 -c BCM2710 /proc/cpuinfo`
|
||||
|
||||
#Check, if year equals 1970
|
||||
DATE=$(date +"%Y")
|
||||
if [ "$DATE" -le "2015" ]; then
|
||||
echo "---> Critical Error: Please update your systemtime (Year of your system: ${DATE}) -> abort"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# check which init script we should use
|
||||
USE_SYSTEMD=`grep -m1 -c systemd /proc/1/comm`
|
||||
USE_INITCTL=`which /sbin/initctl | wc -l`
|
||||
USE_SERVICE=`which /usr/sbin/service | wc -l`
|
||||
|
||||
# Make sure that the boblight daemon is no longer running
|
||||
BOBLIGHT_PROCNR=$(pidof boblightd | wc -l)
|
||||
if [ $BOBLIGHT_PROCNR -eq 1 ]; then
|
||||
echo '---> Critical Error: Found running instance of boblight. Please stop boblight via Kodi menu before installing hyperion -> abort'
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# Stop hyperion daemon if it is running
|
||||
echo '---> Stop Hyperion, if necessary'
|
||||
if [ $OS_OPENELEC -eq 1 ]; then
|
||||
killall hyperiond 2>/dev/null
|
||||
elif [ $USE_INITCTL -eq 1 ]; then
|
||||
/sbin/initctl stop hyperion 2>/dev/null
|
||||
elif [ $USE_SERVICE -eq 1 ]; then
|
||||
/usr/sbin/service hyperion stop 2>/dev/null
|
||||
elif [ $USE_SYSTEMD -eq 1 ]; then
|
||||
service hyperion stop 2>/dev/null
|
||||
#many people installed with the official script and this just uses service, if both registered -> dead
|
||||
/usr/sbin/service hyperion stop 2>/dev/null
|
||||
fi
|
||||
|
||||
#Install dependencies for Hyperion
|
||||
if [ $OS_OPENELEC -ne 1 ]; then
|
||||
echo '---> Install/Update Hyperion dependencies (This may take a while)'
|
||||
apt-get -qq update && apt-get -qq --yes install libqtcore4 libqtgui4 libqt4-network libusb-1.0-0 ca-certificates
|
||||
fi
|
||||
|
||||
#Check, if dtparam=spi=on is in place (not for OPENELEC)
|
||||
if [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -ne 1 ]; then
|
||||
SPIOK=`grep '^\dtparam=spi=on' /boot/config.txt | wc -l`
|
||||
if [ $SPIOK -ne 1 ]; then
|
||||
echo '---> Raspberry Pi found, but SPI is not ready, we write "dtparam=spi=on" to /boot/config.txt'
|
||||
sed -i '$a dtparam=spi=on' /boot/config.txt
|
||||
REBOOTMESSAGE="echo Please reboot your Raspberry Pi, we inserted dtparam=spi=on to /boot/config.txt"
|
||||
fi
|
||||
fi
|
||||
|
||||
#Check, if dtparam=spi=on is in place (just for OPENELEC)
|
||||
if [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ]; then
|
||||
SPIOK=`grep '^\dtparam=spi=on' /flash/config.txt | wc -l`
|
||||
if [ $SPIOK -ne 1 ]; then
|
||||
mount -o remount,rw /flash
|
||||
echo '---> Raspberry Pi with OpenELEC found, but SPI is not ready, we write "dtparam=spi=on" to /flash/config.txt'
|
||||
sed -i '$a dtparam=spi=on' /flash/config.txt
|
||||
mount -o remount,ro /flash
|
||||
REBOOTMESSAGE="echo Please reboot your OpenELEC, we inserted dtparam=spi=on to /flash/config.txt"
|
||||
fi
|
||||
fi
|
||||
|
||||
#Backup the .conf files, if present
|
||||
echo '---> Backup Hyperion configuration(s), if present'
|
||||
rm -f /tmp/*.json 2>/dev/null
|
||||
if [ $OS_OPENELEC -eq 1 ]; then
|
||||
cp -v /storage/.config/*.json /tmp 2>/dev/null
|
||||
else cp -v /opt/hyperion/config/*.json /tmp 2>/dev/null
|
||||
fi
|
||||
|
||||
# Select the appropriate release
|
||||
HYPERION_ADDRESS=https://sourceforge.net/projects/hyperion-project/files/beta
|
||||
if [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ] && [ $RPI_1 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi_oe.tar.gz
|
||||
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
|
||||
elif [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ] && [ $RPI_2 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi2_oe.tar.gz
|
||||
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
|
||||
elif [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ] && [ $RPI_3 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi3_oe.tar.gz
|
||||
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
|
||||
elif [ $CPU_RPI -eq 1 ] && [ $OS_OSMC -eq 1 ] && [ $RPI_1 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi_osmc.tar.gz
|
||||
elif [ $CPU_RPI -eq 1 ] && [ $OS_OSMC -eq 1 ] && [ $RPI_2 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi2_osmc.tar.gz
|
||||
elif [ $CPU_RPI -eq 1 ] && [ $OS_OSMC -eq 1 ] && [ $RPI_3 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi3_osmc.tar.gz
|
||||
elif [ $CPU_RPI -eq 1 ] && [ $RPI_1 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi.tar.gz
|
||||
elif [ $CPU_RPI -eq 1 ] && [ $RPI_2 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi2.tar.gz
|
||||
elif [ $CPU_RPI -eq 1 ] && [ $RPI_3 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi3.tar.gz
|
||||
elif [ $CPU_IMX6 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_imx6.tar.gz
|
||||
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-imx6.tar.gz
|
||||
elif [ $CPU_WETEK -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_wetek.tar.gz
|
||||
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
|
||||
elif [ $CPU_X32X64 -eq 1 ]; then
|
||||
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_x86x64.tar.gz
|
||||
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-x86x64.tar.gz
|
||||
else
|
||||
echo "---> Critical Error: Target platform unknown -> abort"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# Get and extract the Hyperion binaries and effects
|
||||
echo '---> Downloading the appropriate Hyperion release'
|
||||
if [ $OS_OPENELEC -eq 1 ]; then
|
||||
# OpenELEC has a readonly file system. Use alternative location
|
||||
echo '---> Downloading Hyperion OpenELEC release'
|
||||
curl -# -L --get $HYPERION_RELEASE | tar -C /storage -xz
|
||||
echo '---> Downloading Hyperion OpenELEC dependencies'
|
||||
curl -# -L --get $OE_DEPENDECIES | tar -C /storage/hyperion/bin -xz
|
||||
#set the executen bit (failsave)
|
||||
chmod +x -R /storage/hyperion/bin
|
||||
# modify the default config to have a correct effect path
|
||||
sed -i 's:/opt:/storage:g' /storage/hyperion/config/hyperion.config.json
|
||||
|
||||
# /storage/.config is available as samba share. A symbolic link would not be working
|
||||
false | cp -i /storage/hyperion/config/hyperion.config.json /storage/.config/hyperion.config.json 2>/dev/null
|
||||
else
|
||||
wget -nv $HYPERION_RELEASE -O - | tar -C /opt -xz
|
||||
#set the executen bit (failsave)
|
||||
chmod +x -R /opt/hyperion/bin
|
||||
# create links to the binaries
|
||||
ln -fs /opt/hyperion/bin/hyperiond /usr/bin/hyperiond
|
||||
ln -fs /opt/hyperion/bin/hyperion-remote /usr/bin/hyperion-remote
|
||||
ln -fs /opt/hyperion/bin/hyperion-v4l2 /usr/bin/hyperion-v4l2
|
||||
ln -fs /opt/hyperion/bin/hyperion-dispmanx /usr/bin/hyperion-dispmanx 2>/dev/null
|
||||
ln -fs /opt/hyperion/bin/hyperion-x11 /usr/bin/hyperion-x11 2>/dev/null
|
||||
fi
|
||||
|
||||
# Restore backup of .conf files, if present
|
||||
echo '---> Restore Hyperion configuration(s), if present'
|
||||
if [ $OS_OPENELEC -eq 1 ]; then
|
||||
mv -v /tmp/*.json /storage/.config/ 2>/dev/null
|
||||
else mv -v /tmp/*.json /opt/hyperion/config/ 2>/dev/null
|
||||
fi
|
||||
|
||||
# Copy the service control configuration to /etc/int (-n to respect user modified scripts)
|
||||
if [ $USE_INITCTL -eq 1 ]; then
|
||||
echo '---> Installing initctl script'
|
||||
cp -n /opt/hyperion/init.d/hyperion.initctl.sh /etc/init/hyperion.conf 2>/dev/null
|
||||
initctl reload-configuration
|
||||
elif [ $OS_OPENELEC -eq 1 ]; then
|
||||
#modify all old installs with a logfile output
|
||||
sed -i 's|/dev/null|/storage/logfiles/hyperion.log|g' /storage/.config/autostart.sh
|
||||
# only add to start script if hyperion is not present yet
|
||||
if [ `cat /storage/.config/autostart.sh 2>/dev/null | grep hyperiond | wc -l` -eq 0 ]; then
|
||||
echo '---> Adding Hyperion to OpenELEC autostart.sh'
|
||||
echo "/storage/hyperion/bin/hyperiond.sh /storage/.config/hyperion.config.json > /storage/logfiles/hyperion.log 2>&1 &" >> /storage/.config/autostart.sh
|
||||
chmod +x /storage/.config/autostart.sh
|
||||
fi
|
||||
# only add hyperion-x11 to startup, if not found and x32x64 detected
|
||||
if [ $CPU_X32X64 -eq 1 ] && [ `cat /storage/.config/autostart.sh 2>/dev/null | grep hyperion-x11 | wc -l` -eq 0 ]; then
|
||||
echo '---> Adding Hyperion-x11 to OpenELEC autostart.sh'
|
||||
echo "DISPLAY=:0.0 LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/storage/hyperion/bin /storage/hyperion/bin/hyperion-x11 </dev/null >/storage/logfiles/hyperion.log 2>&1 &" >> /storage/.config/autostart.sh
|
||||
fi
|
||||
elif [ $USE_SYSTEMD -eq 1 ]; then
|
||||
echo '---> Installing systemd script'
|
||||
#place startup script for systemd and activate
|
||||
#Problem with systemd to enable symlinks - Bug? Workaround cp -n (overwrite never)
|
||||
#Bad workaround for Jessie (systemd) users that used the official script for install
|
||||
update-rc.d -f hyperion remove 2>/dev/null
|
||||
rm /etc/init.d/hyperion 2>/dev/null
|
||||
cp -n /opt/hyperion/init.d/hyperion.systemd.sh /etc/systemd/system/hyperion.service
|
||||
systemctl -q enable hyperion.service
|
||||
if [ $OS_OSMC -eq 1 ]; then
|
||||
echo '---> Modify systemd script for OSMC usage'
|
||||
# Wait until kodi is sarted (for kodi checker)
|
||||
sed -i '/After = mediacenter.service/d' /etc/systemd/system/hyperion.service
|
||||
sed -i '/Unit/a After = mediacenter.service' /etc/systemd/system/hyperion.service
|
||||
sed -i 's/User=osmc/User=root/g' /etc/systemd/system/hyperion.service
|
||||
sed -i 's/Group=osmc/Group=root/g' /etc/systemd/system/hyperion.service
|
||||
systemctl -q daemon-reload
|
||||
fi
|
||||
elif [ $USE_SERVICE -eq 1 ]; then
|
||||
echo '---> Installing startup script in init.d'
|
||||
# place startup script in init.d and add it to upstart (-s to respect user modified scripts)
|
||||
ln -s /opt/hyperion/init.d/hyperion.init.sh /etc/init.d/hyperion 2>/dev/null
|
||||
chmod +x /etc/init.d/hyperion
|
||||
update-rc.d hyperion defaults 98 02
|
||||
fi
|
||||
|
||||
#chown the /config/ dir and all configs inside for hypercon config upload for non-root logins
|
||||
if [ $OS_OSMC -eq 1 ]; then
|
||||
chown -R osmc:osmc /opt/hyperion/config
|
||||
elif [ $OS_RASPBIAN -eq 1 ]; then
|
||||
chown -R pi:pi /opt/hyperion/config
|
||||
fi
|
||||
|
||||
# Start the hyperion daemon
|
||||
echo '---> Starting Hyperion'
|
||||
if [ $OS_OPENELEC -eq 1 ]; then
|
||||
/storage/.config/autostart.sh > /dev/null 2>&1 &
|
||||
elif [ $USE_INITCTL -eq 1 ]; then
|
||||
/sbin/initctl start hyperion
|
||||
elif [ $USE_SERVICE -eq 1 ]; then
|
||||
/usr/sbin/service hyperion start
|
||||
elif [ $USE_SYSTEMD -eq 1 ]; then
|
||||
service hyperion start
|
||||
fi
|
||||
|
||||
#Hint for the user with path to config
|
||||
if [ $OS_OPENELEC -eq 1 ];then
|
||||
HINTMESSAGE="echo Path to your configuration -> /storage/.config/hyperion.config.json"
|
||||
else HINTMESSAGE="echo Path to your configuration -> /opt/hyperion/config/hyperion.config.json"
|
||||
fi
|
||||
echo '*******************************************************************************'
|
||||
echo 'Hyperion Installation/Update finished!'
|
||||
echo 'Please get a new HyperCon version to benefit from the latest features!'
|
||||
echo 'Create a new config file, if you encounter problems!'
|
||||
$HINTMESSAGE
|
||||
$REBOOTMESSAGE
|
||||
echo '*******************************************************************************'
|
||||
## Force reboot and prevent prompt if spi is added during a HyperCon Install
|
||||
if [ $HCInstall -eq 1 ] && [ $CPU_RPI -eq 1 ] && [ $SPIOK -ne 1 ]; then
|
||||
echo "Rebooting now, we added dtparam=spi=on to config.txt"
|
||||
reboot
|
||||
exit 0
|
||||
fi
|
||||
#Prompt for reboot, if spi added to config.txt
|
||||
if [ $CPU_RPI -eq 1 ] && [ $SPIOK -ne 1 ]; then
|
||||
while true
|
||||
do
|
||||
echo -n "---> Do you want to reboot your Raspberry Pi now? (y or n) :"
|
||||
read CONFIRM
|
||||
case $CONFIRM in
|
||||
y|Y|YES|yes|Yes) break ;;
|
||||
n|N|no|NO|No)
|
||||
echo "---> No reboot - you entered \"$CONFIRM\""
|
||||
exit
|
||||
;;
|
||||
*) echo "-> Please enter only y or n"
|
||||
esac
|
||||
done
|
||||
echo "---> You entered \"$CONFIRM\". Rebooting now..."
|
||||
reboot
|
||||
fi
|
||||
|
||||
exit 0
|
||||
@ -63,7 +63,7 @@ int main(int argc, char * argv[])
|
||||
ImageParameter & argImage = parameters.add<ImageParameter> ('i', "image" , "Set the leds to the colors according to the given image file");
|
||||
StringParameter & argEffect = parameters.add<StringParameter> ('e', "effect" , "Enable the effect with the given name");
|
||||
StringParameter & argEffectArgs = parameters.add<StringParameter> (0x0, "effectArgs", "Arguments to use in combination with the specified effect. Should be a Json object string.");
|
||||
SwitchParameter<> & argServerInfo = parameters.add<SwitchParameter<> >('l', "list" , "List server info");
|
||||
SwitchParameter<> & argServerInfo = parameters.add<SwitchParameter<> >('l', "list" , "List server info and active effects with priority and duration");
|
||||
SwitchParameter<> & argClear = parameters.add<SwitchParameter<> >('x', "clear" , "Clear data for the priority channel provided by the -p option");
|
||||
SwitchParameter<> & argClearAll = parameters.add<SwitchParameter<> >(0x0, "clearall" , "Clear data for all active priority channels");
|
||||
StringParameter & argId = parameters.add<StringParameter> ('q', "qualifier" , "Identifier(qualifier) of the transform to set");
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user