* Feat: Add SSL support for webserver + websocket
Finally, Hyperion reaches the SSL century!
- Uses by default a internal key and certificate to provide working HTTPS out-of-the-box
- Your browser won't like that, for a green ssl seal next to the browser address bar you need to use Let's Encrypt with a own legit domain. This is out of the scope of Hyperion
- Added CodeDocs config file for customization
- Fixing LGTM alerts
- LGTM bug fixed again
- added token option to hyperion-remote
- fix DBManager::getDB()
- next bugfix
- correct broken signal from SettingManager to Hyperion
- Token list is created after the schema is fetched
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- versionBranch was renamed to watchedVersionBranch (including all variables and strings. even config)
- Enhancements for JSON Editor. Detection of advanced was not so good. Now you can see advaced if advanced or expert is selected. expert is the highest and should also make advanced visible.
- The levels default, advanced, expert are now also respected in the information tabs. Same logic as for the forms itself. Expert is highest and will also show all advanced settings.
Update Check:
- New Property which allows you to select stable or beta branch checks.
- This would rely on current versions.json. It selects the first version in list with you branch (stable, beta). If it is newer hyperion tells you that a update is available
- For this we should keep our deployment pipeline in mind to format the json this way.
Cleanup:
- I cleaned up the WebUI from dead links and the support page with the affiliate links and donation adresses as we don't have them under our control. Currently only disabled, not deleated
Switcher:
- If the address which is published via bonjour serve is IPv6 the Switcher was bugged. Fixed that.
- Video format MJPEG implemented (libjpeg/qimage)
- Inactive priorities are now skipped correctly (PriorityMuxer.cpp line 297)
- v4l configuration section replaced with an object (preparation for #542)
Protocol Buffer reimplemented to receive image data from third-party apps
The status of the component "UDPListener" is now displayed correctly in WebUI
Global signal names for WebUI added
fix ge2d mode
added ge2d single/combined ioctl call
speed up imageresampler
speed up amvideocap0 mode
added config to choose if amvideocap0 or ge2d grabber should be used
* move setvideomode to common place
* implement more croping and 3d support
* more api unification
* more refactoring
* osx fix
* next step
* add a mock for osx grabber. Now it is possible to test compile on none osx platforms.
* more unifications ...
* remove obsolete includes and grabbers are not dyn allocated. dispmanx needs rework an probaly not work atm
* first version of dispmanx mock. it compiles, but outputs a black image
* now dispmanx mock works!
* activate mocks in travis linux build
prepare dispmanx to rgb image out
* dispmanx now with image rgb output
fix deadlock with w/h -1 in grabber v4l
cleanups
* fix json
* fix some runtime stuff
* Update FramebufferWrapper.cpp
fix missing code
* unify grabframe
* 3d and croping for amlogic
* fix setimage not working
* make use of templates
save some codelines
* save more code lines
* add limit for write to leddevice
* add to default config
* add i18n
* extend xmas effect
* fix indention
* add check for minimum brightness
* adapt effects to fading and new minWriteTime
* remove old latchTime
rename minimumWriteTime to latchTime
make it as dev specific option
* set default for rewriteTime to 1s
pause smoothing on color too
* reenable smoothing for color - it looks nicer :-)
* fix timeout timer
* clean color adjustment
* now a prio duration of "0" means infinity
* implement dynamic 'just in time' initialization
* implement new brightness handling
* cahnge access level
* i18n fix
* - cleanup brightness stuff
- update webserver, now with initial ssl support
* - backlightThreshold is now 0-100 instead 0-1
- better performance for brightness - use piecewise linear instead of sqrt
* upd
* update
* update
* update schemachecker
* ...
* fix lowest priority
* zeroconf updates (#421) (#3)
* zeroconf:
add ip
make names more uniq
* tune dns name for webconfig
* update
* update
* update
* update ui
* ...
* min val for gamma
* lost somewhere this
* add status to hyperion object
* update ui
* fix/refactor backlight stuff:
- fix colors dont turn of when backlight 0 and black is set
- add option to use not colored backlight
- fix colored backlight not colored on very low color values
- various code style tunings
* apply needed change to wizard
* backlight disabled on static color and efects
* fix warnings
* try fix udp compiler warnings
* - fix coloradjustment via hyperion remote
- several small cleanups/refactorings
* fix color is shown as unknown in json serverinfo
* fix active color is not shown when autoselect is reactivated
* add new rgbtransform
* activate rgbtransform
* integrate new transform and gamma in adjustment, disable transform
* fix brighness limit
* advance upper and lower thresholds
* start removing color transform
* adjust configs/schema
* implement json for new color adjustment
* finish hyperion-remote extension for new adjustment settings
* fix typos
* rename luminance to brightness
fix jsonapi for new adjustment
* fix some bugs in adjustments
* fix i18n
* fix gamma via json
* now brighness values goes from 0-1 with 0.5 is the default for all brighness is equal between the channels. less 0.5 all channels scaled down
to new brighness, above 0.5 if possible channel gets brighter - but brighness is not equal between the channels anymore
brighness value curve is now exponential instead of linear - this feels more natural
* hslv cleanup
* Rename test to test123
* Delete test123
* New color Ajustment
Trilinear interpolation between the 8 corners of the color cube (black, red, green, blue, cyan, magenta, yellow, white)
* Renaming
* overloading getadjustmentX()
* Renaming
* Additional renaming
* Added more RgbChannel
* Added more colors to channelAdjustment
* Added additional colors
* Added additional colors
* Added additional colors
* Added additional color adjustments
* Update MultiColorAdjustment.cpp
* Fixed black adjustment
* Color config in array form
* move name to general
add a version for config file
* start impl. config migrator
* fix typo amd set access level
* fix schemaa name
* fix schema
* add structure for config migrator
* on v4l screenshot, print out nosignal threshold values
* separate fractional parameters for no signal detection
* fully implement handling for "rainbow grabber"
* refresh for all :-)
remove dups
* - integrate refresh leds for all devices
- fix schemas for led devices
* add minimum for rewrite time
* rewriteTime: add missing info in config examples
* remove color temperatire, its the same as color adjustment
* remove temperature from schema
* implement most part of v4l only colro settings,
now hyperion update knows from which component the colors come
* update configs
* fix webui config write
* reomve correction and temperature from hyperion-remote
* - effects now can use qt image effects
- rainbow swirtl is now suitable for any led layout - including matrix
* fix rainbow effect
* effect: add radialGradient
* fix some js errors
* optimize code
* try fix travis test not working as expected
* fix default config files
* fix config
* implement effects included in hyperiond binary
* cleanup
* remove install of effects dir. People who wants to develop effects has to copy them from github
effect params for initial effects can be changed in config permanently and other effect params can be changed
via json (currently only temporarily)
* fix schema of fadecandy
webui fix display of specific led options
* add leddevice write support
* cleanup
* webui: tune hue code
* when use json effect definition from putsiede hyperiond but want to use py script from inside hyperiond use ad a :
e.g. fade.py needs a fade.py near the json file, but :fade.py is taken from resource inside hyperiond
* add ability to di
* add abiloty to diable effcts via hyperion config
* use effect name instead of script in active effects and prio register
* finally solve open file handle during effect is playing. Now script is read before, then file closed and then t is run by python
* fix some webui things
- led config tabs
- inital loading screen
optimize qrc file generation
fix compile warning in hyperion.cpp
* cleanup
* more cleanup
* Remove "endOfJson" Value
Deprecated value from Hypercon
* Remove "endOfJson" Value
Deprecated value from Hypercon
* Add writeJson function to JsonFactory
* ability to ignore required value in schema file
* Remove "endOfJson" Value
* Add handleConfigSetCommand function
* Add handleConfigSetCommand function
* Update JsonSchemas.qrc
* Update schema.json
* Update JsonSchemaChecker.cpp
* Add configSet command to Hyperion-remote
* Add setConfigFile function
* Add setConfigFile function
* Add schema-configset.json
* add --sourceOff to hyperion-remote - this will select "off" source and set all leds to black
refactor new json stuff
make schema checker not so strict, do not require values that have defaults (not finished yet)
initialEffect config: effect is always an array, regardless if it is a color or an effect name
* make off source visible in active priority list
* transform initialeffect to qjson (except part of effect-args, this needs effectengine transformed to qjson)
* remove unneeded comment
* add web ui for source selection.
call http://hyperion_host:8099/select/index.html
current example needed json server on port 19444
