* implement rigin for efx
* implement origin for effects and other components
add experimental adalight firmware for arduino with upto 5 pwm channels
* cleanup
* origin ip now with dns lookup
* fix compile
* move some code
* fix/refactor backlight stuff:
- fix colors dont turn of when backlight 0 and black is set
- add option to use not colored backlight
- fix colored backlight not colored on very low color values
- various code style tunings
* apply needed change to wizard
* backlight disabled on static color and efects
* fix warnings
* try fix udp compiler warnings
* implement config save over http post instead of json
* remove json set config
finish config write thrugh http post
* remove debug code and add failure messages
* - fix coloradjustment via hyperion remote
- several small cleanups/refactorings
* fix color is shown as unknown in json serverinfo
* fix active color is not shown when autoselect is reactivated
* add new rgbtransform
* activate rgbtransform
* integrate new transform and gamma in adjustment, disable transform
* fix brighness limit
* advance upper and lower thresholds
* start removing color transform
* adjust configs/schema
* implement json for new color adjustment
* finish hyperion-remote extension for new adjustment settings
* fix typos
* rename luminance to brightness
fix jsonapi for new adjustment
* fix some bugs in adjustments
* fix i18n
* fix gamma via json
* now brighness values goes from 0-1 with 0.5 is the default for all brighness is equal between the channels. less 0.5 all channels scaled down
to new brighness, above 0.5 if possible channel gets brighter - but brighness is not equal between the channels anymore
brighness value curve is now exponential instead of linear - this feels more natural
* hslv cleanup
* Rename test to test123
* Delete test123
* New color Ajustment
Trilinear interpolation between the 8 corners of the color cube (black, red, green, blue, cyan, magenta, yellow, white)
* Renaming
* overloading getadjustmentX()
* Renaming
* Additional renaming
* Added more RgbChannel
* Added more colors to channelAdjustment
* Added additional colors
* Added additional colors
* Added additional colors
* Added additional color adjustments
* Update MultiColorAdjustment.cpp
* Fixed black adjustment
* Color config in array form
* move name to general
add a version for config file
* start impl. config migrator
* fix typo amd set access level
* fix schemaa name
* fix schema
* add structure for config migrator
* update lightberry sketches
update compilehowwto (windows disclaimer)
some refactoring in main cmakelists + preparation for windows compile
tune ada driver, set delayAfterConnect default to 1.5s because some arduino (e.g. mega r3) needs this
set priority min/max for grabber/network services - prevent colliding prios between webui/background stuff and grabbers/net services
* add check if config is writable. TODO do something usefull in webui
* fix indention error
* fix typo
* fix webui can't write led config
* typo
* fix cmakelists
* change methode of detecting linux
* Update EffectEngine.h
* add reloadEffects function
* add readEffects function
* add reloadEffects function
* Call reloadEffects after handleCreateEffectCommand and handleDeleteEffectCommand
* remove color temperatire, its the same as color adjustment
* remove temperature from schema
* implement most part of v4l only colro settings,
now hyperion update knows from which component the colors come
* update configs
* fix webui config write
* reomve correction and temperature from hyperion-remote
* switch rs232 provider to completly async transfer
* start of implementing a seperate init function for leddevices
* rename setconfig to init
* more fixes
* implement missing code
* fix code style
* remove debug code
* remove debug stuff
* set loglevel to original state
* - effects now can use qt image effects
- rainbow swirtl is now suitable for any led layout - including matrix
* fix rainbow effect
* effect: add radialGradient
* fix some js errors
* optimize code
* try fix travis test not working as expected
* fix default config files
* fix config
* first try
* implement hyperion restart. core function is good, but needs a beeter structuring- something for next refactoring session ;-)
* several fixes (including osx)
merge with upstream
some refactoring
* add some eye candy to webui
* implement effects included in hyperiond binary
* cleanup
* remove install of effects dir. People who wants to develop effects has to copy them from github
effect params for initial effects can be changed in config permanently and other effect params can be changed
via json (currently only temporarily)
* fix schema of fadecandy
webui fix display of specific led options
* add leddevice write support
* cleanup
* webui: tune hue code
* when use json effect definition from putsiede hyperiond but want to use py script from inside hyperiond use ad a :
e.g. fade.py needs a fade.py near the json file, but :fade.py is taken from resource inside hyperiond
* add ability to di
* add abiloty to diable effcts via hyperion config
* use effect name instead of script in active effects and prio register
* finally solve open file handle during effect is playing. Now script is read before, then file closed and then t is run by python
* fix some webui things
- led config tabs
- inital loading screen
optimize qrc file generation
fix compile warning in hyperion.cpp
* cleanup
* more cleanup
* split content and js
tune leds config
* implement connection lost page
* split js/html in huebridge
* add js action for connection lost
* extend led config
make connection loss nicer
* tune led code
add menu entry for grabber
* more tuning of webui
* switch back to botstrap textarea
add v4l to components
* add icon
* extend schema for jsoneditor
* implement ledcolors streaming with 4fps
* implement component state
* commit debug code to save it due to merge
* migrate first devices to new device registry and configure on runtime
* fadecandy and rs232 resets device if config is set
* try to hunt crash on osx
* test commit if this works with osx
* refactor spi devices
* cleanup
* refactor leddevices file, tinkerforge and ws2812b
* refactor raw usb devices
* refactor udp devices
* - add tpm2net driver
- remove old udp driver from build (files left in place for reference for new udp driver)
- json serverinfo shows available leddevices
* finish rework part 2 of leddevices
* add schemas for leddevices.
currently only compiled in, but not usedx
* implement enable/disable on runtime for:
- smoothing
- kodi
- udplistener
- boblight
* implement enable/disable for forwarder
refactor component
* - implement grabber enable/disable at runtime
- big grabber refactoring. now with common base class for all grabbers
* implement enable/disable at runtime for bb detector
* osx fix
* try to fix cutted travis output for osx build
* start ledclone
* led cloning: clone scan areas from original led
main: show exceptions, better exit
* tune json schema for new option. somwe cleanup
* fix warnings and bug for framebuffer selection. thx to clang brought by new osx buikld on travis
* make ledclone feature work flawlessly for effects too. Effect sees the ledstring without cloned leds.
cloned leds will be inserted just before sending to leddevice
additional: remove warnings and fix code style
* fix warning
* add --sourceOff to hyperion-remote - this will select "off" source and set all leds to black
refactor new json stuff
make schema checker not so strict, do not require values that have defaults (not finished yet)
initialEffect config: effect is always an array, regardless if it is a color or an effect name
* make off source visible in active priority list
* transform initialeffect to qjson (except part of effect-args, this needs effectengine transformed to qjson)
* remove unneeded comment
* add web ui for source selection.
call http://hyperion_host:8099/select/index.html
current example needed json server on port 19444
* add ability to disably specific color corrections
update protobuf external
move smoothing out of color section
* update config
* update schema
* update schema
* multi fix commit
- refactoring leddevicefactory
- adalight: default for "delayAfterConnect" is 1s now - needed for most arduino's because of there special behaviour on open
- fadecandy: new option for disabling configuration send - if you want to keep your fadecandy defaults
- Hyperion.cpp: simplify createSmoothing discussed in #105
- smoothing:
-- add option for continuous output
-- when updatedelay>0 and continousOutput is disabled, buffer is flushed correctly after no input is detected
* add doxygen to travis
* common ledbuffer for color transform
hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer
other fixes:
fix compile bug in profiler
update doxygen config
* migrate logging for color transform classes
* prepare new logger in hyperion class
* implement hwledcount
* Update Hyperion.cpp
Fix off color
* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature
* remove colorcorrection completly
fix compile
* set colororder back to static
* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
* refactoring of RgbChannelAdjustment
* - remove rgbchannelcorrection, this was a dup of rgbchanneladjustment
- add cmake policy to hide warning
- tune code of rgbchanneltransform
* common ledbuffer for color transform
hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer
other fixes:
fix compile bug in profiler
update doxygen config
* migrate logging for color transform classes
* prepare new logger in hyperion class
* implement hwledcount
* Update Hyperion.cpp
Fix off color
* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature
* remove colorcorrection completly
fix compile
* set colororder back to static
* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
