* Fix that lighpack cores when lack of permissions
* Atmo/Karate - Fix LedCount constraint handling
* Hue updates - Have EntertainmentAPI as default, disable hardwareledcount as cacultated
* Have Gamma per default 2.2
* SPI Fix - Free allocated memory in case of invert
* Remove development statement
* UI updates
* Minor corrections
* Tpm2net Fix - Free allocated memory
* LGTM Finding
* Add config directory and user type to SysInfo
* WS281x - Ensure that device runs with root priviliges
* WS281x - Update DMA defauls as per rpi_ws281x recommendation
* Support Sysinfo for Qt < 5.10
* Address LGTM finding
* Discover additional Nanoleaf devices
* Fix Nanoleaf not turning on
* Added LGTM configuration file
* Allow to pass QJsonObject as payload for put
* Nanoleaf - Support Restore State & Overwrite Brightness
* Removed because this is already included
Co-authored-by: Markus <16664240+Paulchen-Panther@users.noreply.github.com>
* - New Media Foundation grabber
- JsonAPI available grabber fix
- commented json config removed
* Added libjpeg-turbo to dependencies
* Fix OSX build
Removed Azure Pipelines from build scripts
* Remove Platform from Dashboard
* Correct Grabber Namings
* Grabber UI improvements, generic JSONEditor Selection Update
* Active grabber fix
* Stop Framebuffer grabber on failure
* - Image format NV12 and I420 added
- Flip mode
- Scaling factor for MJPEG
- VSCode (compile before run)
- CI (push) dependency libjpeg-turbo added
* Refactor MediaFoundation (Part 1)
* Remove QDebug output
* Added image flipping ability to MF Grabber
* fix issue 1160
* -Reload MF Grabber only once per WebUI update
- Cleanup
* Improvements
* - Set 'Software Frame Decimation' begin to 0
- Removed grabber specific device name from Log
- Keep pixel format when switching resolution
- Display 'Flip mode' correct in Log
- BGR24 images always flipped
* Refactor MediaFoundation (Part 2)
* Refactor V4L2 grabber (part 1) (#62)
* Media Foundation grabber adapted to V4L2 change
* Enable Media Foundation grabber on windows
* Have fps as int, fix height typo
* Added video standards to JsonAPI output
* Error handling in source reader improved
* Fix "Frame to small" error
* Discovery VideoSources and Dynamically Update Editor
* Hide all element when no video grabber discovered, upate naming
* Do not show unsupported grabbers
* Copy Log to Clipboard
* Update Grabber schema and Defaults
* Update access levels and validate crop ranges
* Height and width in Qt grabber corrected
* Correct formatting
* Untabify
* Global component states across instances
* Components divided on the dashboard
* refactor
* Fix Merge-issues
* Database migration aligning with updated grabber model
* Align Grabber.js with new utility functions
* Allow editor-validation for enum-lists
* Handle "Show Explainations scenario" correctly
* Grabber - Ensure save is only possible on valid content
* Dashboard update + fix GlobalSignal connection
* Ensure default database is populated with current release
* Correct grabber4L2 access level
* Display Signal detection area in preview
* Write Hyperion version into default config on compiling.
* Create defaultconfig.json dynamically
* WebUI changes
* Correct grabber config look-ups
* Refactor i18n language loading
* Fix en.json
* Split global capture from instance capture config
* Update grabber default values
* Standalone grabber: Add --debug switch
* Enhance showInputOptionsForKey for multiple keys
* Add grabber instance link to system grabber config
* Only show signal detection area, if grabber is enabled
* Always show Active element on grabber page
* Remote control - Only display gabber status, if global grabber is enabled
* WebUI optimization (thx to @mkcologne)
Start Grabber only when global settings are enabled
Fixed an issue in the WebUI preview
* V4L2/MF changes
* Jsoneditor, Correct translation for default values
* Refactor LED-Device handling in UI and make element naming consistent
* MF Discovery extended
* Fix LGTM finding
* Support Grabber Bri, Hue, Sat and Con in UI, plus their defaults
* Concider Access level for item filtering
* Concider Access level for item filtering
* Revert "Concider Access level for item filtering"
This reverts commit 5b0ce3c0f2.
* Disable fpsSoftwareDecimation for framegrabber, as not supported yet
* JSON-Editor- Add updated schema for validation on dynamic elements
* added V4L2 color IDs
* LGTM findings fix
* destroy SR callback only on exit
* Grabber.js - Hide elements not supported by platform
* Fixed freezing start effect
* Grabber UI - Hardware controls - Show current values and allow to reset to defaults
* Grabber - Discovery - Add current values to properties
* Small things
* Clean-up Effects and have ENDLESS consistently defined
* Fix on/off/on priority during startup, by initializing _prevVisComp in line with background priority
* Add missing translation mappings
* DirectX Grabber reactivated/ QT Grabber size decimation fixed
* typo in push-master workflow
* Use PreciseTimer for Grabber to ensure stable FPS timing
* Set default Screencapture rate consistently
* Fix libjpeg-turbo download
* Remove Zero character from file
* docker-compile Add PLATFORM parameter, only copy output file after successful compile
* Framebuffer, Dispmanx, OSX, AML Grabber discovery, various clean-up and consistencies across grabbers
* Fix merge problem - on docker-compile Add PLATFORM parameter, only copy output file after successful compile
* Fix definition
* OSXFRameGrabber - Revert cast
* Clean-ups nach Feedback
* Disable certain libraries when building armlogic via standard stretch image as developer
* Add CEC availability to ServerInfo to have it platform independent
* Grabber UI - Fix problem that crop values are not populated when refining editor rage
* Preserve value when updating json-editor range
* LEDVisualisation - Clear image when source changes
* Fix - Preserve value when updating json-editor range
* LEDVisualisation - Clear image when no component is active
* Allow to have password handled by Password-Manager (#1263)
* Update default signal detection area to green assuming rainbow grabber
* LED Visualisation - Handle empty priority update
* Fix yuv420 in v4l2 grabber
* V4L2-Grabber discovery - Only report grabbers with valid video input information
* Grabber - Update static variables to have them working in release build
* LED Visualisation - ClearImage when no priorities
* LED Visualisation - Fix Logo resizing issue
* LED Visualisation - Have nearly black background and negative logo
Co-authored-by: LordGrey <lordgrey.emmel@gmail.com>
Co-authored-by: LordGrey <48840279+Lord-Grey@users.noreply.github.com>
* Refactor LedDevices - Initial version
* Small renamings
* Add WLED as own device
* Lpd8806 Remove open() method
* remove dependency on Qt 5.10
* Lpd8806 Remove open() method
* Update WS281x
* Update WS2812SPI
* Add writeBlack for WLED powerOff
* WLED remove extra bracket
* Allow different Nanoleaf panel numbering sequence (Feature req.#827)
* build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826)
* Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4.
- [Release notes](https://github.com/faye/websocket-extensions-node/releases)
- [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md)
- [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4)
* Fix typos
* Nanoleaf clean-up
* Yeelight support, generalize wizard elements
* Update Yeelight to handle quota in music mode
* Yeelight extend rage for extraTimeDarkness for testing
* Clean-up - Add commentary, Remove development debug statements
* Fix brightnessSwitchOffOnMinimum typo and default value
* Yeelight support restoreOriginalState, additional Fixes
* WLED - Remove UDP-Port, as it is not configurable
* Fix merging issue
* Remove QHostAddress::operator=(const QString&)' is deprecated
* Windows compile errors and (Qt 5.15 deprecation) warnings
* Fix order includes
* LedDeviceFile Support Qt5.7 and greater
* Windows compatibility and other Fixes
* Fix Qt Version compatability
* Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support
* Disable WLED Wizard Button (until Wizard is available)
* Yeelight updates
* Add wrong log-type as per #505
* Fixes and Clean-up after clang-tidy report
* Fix udpe131 not enabled for generated CID
* Change timer into dynamic for Qt Thread-Affinity
* Hue clean-up and diyHue workaround
* Updates after review feedback by m-seker
* Add "chrono" includes
* Fix Rewrite/Latch Time
* dependencies can now be specified in the schema
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
* dependencies can now be specified in the schema
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
* correct default config
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
* dependencies part 2
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
* Update README.md
* build: Update Windows to Qt5.15 (#798)
* Update compile howto
- to qt5.15
- minimal install overhead
- sync with vscode and cmake
* Update docs with more input
gh actions windows: Qt5.15 and msvc2019
* fix: Azure build
* feat: Add Trapezoid to LED Layout (#791)
* Update schema-ledConfig.json
extend schema with corner points (vertcal and horizontal values in percent)
* Update conf_leds.html
input fields for corner points
* Update content_leds.js
add corner values and calculation of led rows
* Update de.json
german title for corners
* CHanges 26.12.2019 Correction and PowerOff add
* GrabberFix PiCam
* VType as QString
* Unused variable deletet
* Missing new paramneters for GrabberFix
* Error json
* JSon error by user
* Crosscompile SutnikElf frok
* Warning unused variable
* Revert "Crosscompile SutnikElf frok"
This reverts commit 443fe80090.
* Fixing a linting error
* Adding Grabber Override Names
* Adding more Grabber Fix translations
* Missed one
* remove V4L2 Grabber Fix and Power Button from Dashboard
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
* Setting some limits to the trapezoid
Co-authored-by: SputnikElf <58911932+SputnikElf@users.noreply.github.com>
Co-authored-by: SputnikElf <sputnikelf@gmx.de>
Co-authored-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
* add Hue EntertainmentAPI + Forwarder & other Fixes (#592)
* whitespaces + typo fixes
* JS / LGTM fixes
* SSDP Handler crash fix
* MessageForwarder handlePriorityChanges Slave fixes
* use aboutToQuit Signal
* complete rewriten Hue Entertainment API structure
combined Philips Hue and Entertainment API
with new MbedTLS based SSL UDP Provider
* add required cross-compile submodules
* logical rebuild fn: initLeds, setLights + new logs
-more detailed checks and error handling inside iniLeds and setLights
- logical script procedure before ProviderUdpSSL init
- first steps for multiple ProviderUdpSSL usage
- better fallback support to old RestAPI, if entertainment api is not supported
- just 4 u LordGrey: new log fn for cosmetic config outputs ;)
* add OSX CompileHowTo - undo from CrossCompileHowTo
* whitespace fixes
* lightID toString fix
* fix unsigned int E-API + debug output
* bugfixes, reworked black signal detection, wizard:
- change device config field light-ids from int to string -> real unsigned int fix
- add signal detection brightness minimum threshold value
0.0 for 0% brightness - 1.0 for 100% brightness to count for blacklight signal detection
reason: input may not 100% black, like mine - i have a deep dark gray input signal
-> my threshold value is set to 0.005 for 0.5% minimum brightness = 1 (from max 255) to count as black
- wizard optimations, with fallback without entertainment support (beta state)
- whitespace fixes
* cleanup + minor fixes
* change fixed Hue UPD SSL config to _devConfig paras
* Hotfix SSL Connection, new light models, wizard:
- Fix UPD SSL Connection failed Problems
- add new supported gamut C light models: LCG002, LCA001, LCA002, LCA003
- wizard: extend fallback support to classic mode + hints
* whitespace, typo fix
* uncheck useEntertainmentAPI, if noAPISupport detected + hint
* coredump fix -> add _blackLightsTimer nullptr init
* code cleanup / remove old debugs + whitespacefixes
* add gamut C LCP001, LCP002
* SSL UDP config made more flexible + remove qDebug
-> switch to hyerion.ng _log
-> replace logCommand with verbose
-> code cleanups etc...
* extended mbedtls debugging infos
* add adjustable ssl timeout settings
* error handling
* streamdebugger bugfixes
* UPDSSL psk / psk_identity bugfixes! + hue wizard fn typo fix +
- verbose option available without dependencies
- whitespace fixes
* Philips Hue Assistant now recognizes non-original bridges better...
+ Added note if no clientkey is set when using the entertainment API
+ User creation (+ clientkey) for non-original bridges can now also be used
+ Minor changes and bug fixes
* CMAKE mbedTLS detection
* minor bug fixes + code cleanups
* FindMbedTLS.cmake remove Path-Hints + wizard.js: ajax timeout handling
Test - content_grabber.js: run relevant code only, if V4L2_AVAIL is true:
conf_grabber don't displays other devices, if V4L2 is not available
* compile mbedtls via cmake as static lib
* remove libmbedtls-dev from compileHowto / scripts
* Fix Windows build
* Fix windows build (part 2)
* removed unnecessary osx x11 include directory path
* QTimer Shutdown bugfix
* cmake win32 fix + minor bugfixes
* cmake debug msg used mbedtls libs
* Bugfix: noSignalDetection wasn't switchedOn again
if no signal was previously detected
* Some code fixes based on alerts from lgtm.com
Co-authored-by: Paulchen Panther <16664240+Paulchen-Panther@users.noreply.github.com>
* Update devices allowing rewriteTime
* Fix typo
* Add missing "general_btn_saverestart" text to en-file
Co-authored-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
Co-authored-by: Paulchen Panther <16664240+Paulchen-Panther@users.noreply.github.com>
Co-authored-by: brindosch <edeltraud70@gmx.de>
Co-authored-by: Ben Williams <desertblade@gmail.com>
Co-authored-by: SputnikElf <58911932+SputnikElf@users.noreply.github.com>
Co-authored-by: SputnikElf <sputnikelf@gmx.de>
Co-authored-by: SJunkies <41368976+SJunkies@users.noreply.github.com>
* whitespaces + typo fixes
* JS / LGTM fixes
* SSDP Handler crash fix
* MessageForwarder handlePriorityChanges Slave fixes
* use aboutToQuit Signal
* complete rewriten Hue Entertainment API structure
combined Philips Hue and Entertainment API
with new MbedTLS based SSL UDP Provider
* add required cross-compile submodules
* logical rebuild fn: initLeds, setLights + new logs
-more detailed checks and error handling inside iniLeds and setLights
- logical script procedure before ProviderUdpSSL init
- first steps for multiple ProviderUdpSSL usage
- better fallback support to old RestAPI, if entertainment api is not supported
- just 4 u LordGrey: new log fn for cosmetic config outputs ;)
* add OSX CompileHowTo - undo from CrossCompileHowTo
* whitespace fixes
* lightID toString fix
* fix unsigned int E-API + debug output
* bugfixes, reworked black signal detection, wizard:
- change device config field light-ids from int to string -> real unsigned int fix
- add signal detection brightness minimum threshold value
0.0 for 0% brightness - 1.0 for 100% brightness to count for blacklight signal detection
reason: input may not 100% black, like mine - i have a deep dark gray input signal
-> my threshold value is set to 0.005 for 0.5% minimum brightness = 1 (from max 255) to count as black
- wizard optimations, with fallback without entertainment support (beta state)
- whitespace fixes
* cleanup + minor fixes
* change fixed Hue UPD SSL config to _devConfig paras
* Hotfix SSL Connection, new light models, wizard:
- Fix UPD SSL Connection failed Problems
- add new supported gamut C light models: LCG002, LCA001, LCA002, LCA003
- wizard: extend fallback support to classic mode + hints
* whitespace, typo fix
* uncheck useEntertainmentAPI, if noAPISupport detected + hint
* coredump fix -> add _blackLightsTimer nullptr init
* code cleanup / remove old debugs + whitespacefixes
* add gamut C LCP001, LCP002
* SSL UDP config made more flexible + remove qDebug
-> switch to hyerion.ng _log
-> replace logCommand with verbose
-> code cleanups etc...
* extended mbedtls debugging infos
* add adjustable ssl timeout settings
* error handling
* streamdebugger bugfixes
* UPDSSL psk / psk_identity bugfixes! + hue wizard fn typo fix +
- verbose option available without dependencies
- whitespace fixes
* Philips Hue Assistant now recognizes non-original bridges better...
+ Added note if no clientkey is set when using the entertainment API
+ User creation (+ clientkey) for non-original bridges can now also be used
+ Minor changes and bug fixes
* CMAKE mbedTLS detection
* minor bug fixes + code cleanups
* FindMbedTLS.cmake remove Path-Hints + wizard.js: ajax timeout handling
Test - content_grabber.js: run relevant code only, if V4L2_AVAIL is true:
conf_grabber don't displays other devices, if V4L2 is not available
* compile mbedtls via cmake as static lib
* remove libmbedtls-dev from compileHowto / scripts
* Fix Windows build
* Fix windows build (part 2)
* removed unnecessary osx x11 include directory path
* QTimer Shutdown bugfix
* cmake win32 fix + minor bugfixes
* cmake debug msg used mbedtls libs
* Bugfix: noSignalDetection wasn't switchedOn again
if no signal was previously detected
* Some code fixes based on alerts from lgtm.com
Co-authored-by: Paulchen Panther <16664240+Paulchen-Panther@users.noreply.github.com>
* Align PhilipsHue (Classic)
* Minor Device corrections
* Have code working with Qt < 5.10
* Fixes on Hue Wizzard
* Fixes on Hue Wizzard
* Calculate Latchtime only for lights updated by hyperion
* Allow to disable restoring original light's state
* Fix - LightIDs / LightMap vectors were not cleared when reopening the device
* Reduce API Calls for state updates by consolidation
* Handle Exceptions in main & Pythoninit
* Have SSDPDiscover generic again
* Have SSDPDiscover generic again
* Change Info- to Debug logs as technical service messages
* Nanoleaf - When switched on, ensure UDP mode
* Include SQL Database in Cross-Compile instructions
* Fix Clazy (QT code checker) and clang Warnings
* Stop LedDevice:write for disabled device
* Nanoleaf: Fix uint printfs
* NanoLeaf: Fix indents to tabs
* NanoLeaf - Add debug verbosity switches
* Device switchability support, FileDevice with timestamp support
* Nanoleaf Light Panels now support External Control V2
* Enhance LedDeviceFile by Timestamp + fix readyness
* Stop color stream, if LedDevice disabled
* Nanoleaf - remove switchability
* Fix MultiColorAdjustment, if led-range is greater lednum
* Fix logging
* LedFileDevice/LedDevice - add testing support
* New "Led Test" effect
* LedDeviceFile - Add chrono include + Allow Led rewrites for testing
* Stabilize Effects for LedDevices where latchtime = 0
* Update LedDeviceFile, allow latchtime = 0
* Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates
* Updates LedDeviceFile - Initialize via Open
* Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions
* Updates ProviderUDP - Remove throwing exceptions
* Framebuffer - Use precise timer
* TestSpi - Align to LedDevice updates
* Pretty Print CrossCompileHowTo as markdown-file
* Ensure that output is only written when LedDevice is ready
* Align APA102 Device to new device staging
* Logger - Remove clang warnings on extra semicolon
* Devices SPI - Align to Device stages and methods
* Fix cppcheck and clang findings
* Add Code-Template for new Devices
* Align devices to stages and methods, clean-up some code
* Allow to reopen LedDevice without restart
* Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes"
* Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic
* Expose LedDevice getLedCount and align signedness
* Handle Exceptions in main & Pythoninit
* Have SSDPDiscover generic again
* Have SSDPDiscover generic again
* Change Info- to Debug logs as technical service messages
* Nanoleaf - When switched on, ensure UDP mode
* Include SQL Database in Cross-Compile instructions
* Fix Clazy (QT code checker) and clang Warnings
* Stop LedDevice:write for disabled device
* Nanoleaf: Fix uint printfs
* NanoLeaf: Fix indents to tabs
* NanoLeaf - Add debug verbosity switches
* Device switchability support, FileDevice with timestamp support
* Nanoleaf Light Panels now support External Control V2
* Enhance LedDeviceFile by Timestamp + fix readyness
* Stop color stream, if LedDevice disabled
* Nanoleaf - remove switchability
* add dynamic smoothing first step
* extend prio muxer to hold smoothing preset id
* add icons for systray
* fix missing changes in prio muxer
* implement specific smoothing params for effects
* refactoring: std::min/max to qMin/Max
* some code optimization
* fix schema and translation
* revoke change of python include order
* fix eol in effect shemas
* optimize random,candle and fadecandy json schemas
* Started implementing artnet/DMX support
It compiles, but certainly wont work just yet
* Fix up packet data and length
correct default udp port
The data looks ok in wireshark
* Code cleanup
Sequence runs from 1..255 not 0
fix universe > 255
* code cleanups and force even number of channels
* Fix potential endianness issue
* added support for 'x' channels per fixture with zero padding
its very basic support for now - it needs better multi universe support
* add limit for write to leddevice
* add to default config
* add i18n
* extend xmas effect
* fix indention
* add check for minimum brightness
* adapt effects to fading and new minWriteTime
* remove old latchTime
rename minimumWriteTime to latchTime
make it as dev specific option
* set default for rewriteTime to 1s
pause smoothing on color too
* reenable smoothing for color - it looks nicer :-)
* fix timeout timer
* Added missing json document compilation to states retrieval.
* Major rework and implemented feature to increase brightness by a configurable factor.
* Made network manager property of the hue bridge class.
* Fixed some errors regarding model id handling.
* Removed early return.
* Update of philips hue schema for new parameter
* Adding support for sk6822 timing
This isnt complete, but should be a good starting point for others to learn from.
1) Here is where the led device source is located:
cd libsrc/leddevice
2) Find the files that need changing:
root@loungepi:libsrc/leddevice# grep -ri 2812spi *
CMakeLists.txt: ${CURRENT_SOURCE_DIR}/LedDeviceWs2812SPI.h
CMakeLists.txt: ${CURRENT_SOURCE_DIR}/LedDeviceWs2812SPI.cpp
LedDeviceFactory.cpp: #include "LedDeviceWs2812SPI.h"
LedDeviceFactory.cpp: REGISTER(Ws2812SPI);
LedDeviceSchemas.qrc: <file alias="schema-ws2812spi">schemas/schema-ws2812spi.json</file>
LedDeviceWs2812SPI.cpp:#include "LedDeviceWs2812SPI.h"
LedDeviceWs2812SPI.cpp:LedDeviceWs2812SPI::LedDeviceWs2812SPI(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp:LedDevice* LedDeviceWs2812SPI::construct(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp: return new LedDeviceWs2812SPI(deviceConfig);
LedDeviceWs2812SPI.cpp:bool LedDeviceWs2812SPI::init(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp:int LedDeviceWs2812SPI::write(const std::vector<ColorRgb> &ledValues)
LedDeviceWs2812SPI.h:class LedDeviceWs2812SPI : public ProviderSpi
LedDeviceWs2812SPI.h: LedDeviceWs2812SPI(const QJsonObject &deviceConfig);
3) Copy the existing files as a starting point:
cp LedDeviceWs2812SPI.cpp LedDeviceSk6822SPI.cpp
cp LedDeviceWs2812SPI.h LedDeviceSk6822SPI.h
cp schemas/schema-ws2812spi.json schemas/schema-sk6822spi.json
4) Do some search and replacing:
:%s/Ws2812SPI/Sk6822SPI/g
5) edit the other files (see the diffs in this commit)
* Added wait time and reset time
* Fixed up debugging output and commented it out.
* - disable device when error indecates that the problem is not solvable on reconnect
- introduce a preOpenDelay of 2 seconds (currently value is hardcoded)
* rs232:
- make preOpenDelay available via webui
- fix preOpenDelay
- add basic usb serial detection
* - revert 3819ae7
- fix schema files
* make json checks compat with utf8+bom
* make shutdown effect a bit more flexible
* update lightberry sketches
update compilehowwto (windows disclaimer)
some refactoring in main cmakelists + preparation for windows compile
tune ada driver, set delayAfterConnect default to 1.5s because some arduino (e.g. mega r3) needs this
set priority min/max for grabber/network services - prevent colliding prios between webui/background stuff and grabbers/net services
* add check if config is writable. TODO do something usefull in webui
* fix indention error
* fix typo
* fix webui can't write led config
* typo
* fix cmakelists
* change methode of detecting linux
* refresh for all :-)
remove dups
* - integrate refresh leds for all devices
- fix schemas for led devices
* add minimum for rewrite time
* rewriteTime: add missing info in config examples
* Added latchtime web configuration for ws2801 device.
Fixed default to be 500000ns
* cleaner code using defaults and added "ns" to web schema
* oops... "ns" not "ms"
* rename platform rpi-pwm to rpi. remove original rpi platform
install symlink to bin folder
create effects folder for custom effects
* fix osx jobs evaluation
* - add rewrite time to serial leds
- rework adalight sketch
* add analog output
* adalight: add analog mode: last led
* tune adalight sketch to final state
move refresh code to leddevice base class, so every leddevice can use it
* Started work on DMX512 rs232 device
cloned from sedu - no actual changes yet
* Implemented DMX protocol
Added baudrate debugging to ProviderRs232
* Added support for multiple DMX fixture types
