Commit Graph

1002 Commits

Author SHA1 Message Date
redPanther
05ee316c1d remove obsolete kodi code for grabbers (#372) 2017-01-20 23:43:22 +01:00
brindosch
c85b2de13d Update DispmanxWrapper.cpp 2017-01-20 15:01:13 +01:00
brindosch
30b6deb301 bugfixes and adjustments (#371)
* update

* update

* tabs test

* update

* test

* ...

* fix editor

* update ui

* fix visual glitch if help is off

* fix fadecandy error and th

[skip ci]

* fix
2017-01-19 17:51:11 +01:00
penfold42
8c2185b641 Fix latchtime logic - it was always ignored (#368) 2017-01-19 01:55:06 +01:00
brindosch
8d7137136b priorities rework, webc update (#366)
* update

* update

* tabs test

* update

* test

* ...

* fix editor

* update ui

* fix visual glitch if help is off

* fix fadecandy error and th

[skip ci]
2017-01-17 21:53:35 +01:00
redPanther
281b1c8ea5 Webui save - fix white space writing (#364)
* implement config save over http post instead of json

* remove json set config
finish config write thrugh http post

* remove debug code and add failure messages

* fix save issue with white spaces
2017-01-15 08:53:52 +01:00
redPanther
8a9d2760ef move write config from json api to http post (#363)
* implement config save over http post instead of json

* remove json set config
finish config write thrugh http post

* remove debug code and add failure messages
2017-01-14 19:04:58 +01:00
redPanther
b2a6366176 fix coloradjustment via hyperion remote (#362)
* - fix coloradjustment via hyperion remote
- several small cleanups/refactorings

* fix color is shown as unknown in json serverinfo

* fix active color is not shown when autoselect is reactivated
2017-01-10 19:58:41 +01:00
redPanther
ef14eb08c9 fix state of autoselect (#361) 2017-01-09 22:41:44 +01:00
redPanther
caab8e819b Adjustment merge + new brightness settings (#359)
* add new rgbtransform

* activate rgbtransform

* integrate new transform and gamma in adjustment, disable transform

* fix brighness limit

* advance upper and lower thresholds

* start removing color transform

* adjust configs/schema

* implement json for new color adjustment

* finish hyperion-remote extension for new adjustment settings

* fix typos

* rename luminance to brightness
fix jsonapi for new adjustment

* fix some bugs in adjustments

* fix i18n

* fix gamma via json

* now brighness values goes from 0-1 with 0.5 is the default for all brighness is equal between the channels. less 0.5 all channels scaled down
to new brighness, above 0.5 if possible channel gets brighter - but brighness is not equal between the channels anymore
brighness value curve is now exponential instead of linear - this feels more natural

* hslv cleanup
2017-01-06 14:25:55 +01:00
brindosch
c433504b81 Webn (#2) (#358)
* upd

* upd

* typo

* update ieff

* typo

* ..

* try

* ..

* rm enum

* .

* .

* split initialeff

* upd schema

* ..

* upd

* .

* .

* .

* update

* update
2017-01-04 10:55:10 +01:00
Robin Kobus
2906ec041a Color adjustment fix (#357)
* Rename test to test123

* Delete test123

* fixed color names

* Update hyperion.config.json.commented
2016-12-31 15:00:41 +01:00
redPanther
58f6d0a1d1 make video from proto available in webui live view (#356) 2016-12-30 20:18:41 +01:00
redPanther
8f4341c5c6 implement adjustable image2ledmaptype for proto (#355)
add clean of qrc on make clean
2016-12-30 13:58:25 +01:00
brindosch
f22848f9f4 typo 2016-12-29 17:14:18 +01:00
brindosch
1659000cbb move eff_cp to global edt, update schema 2016-12-29 17:12:06 +01:00
Robin Kobus
8d304d58d2 Color Adjustment 2.0 (#351)
* Rename test to test123

* Delete test123

* New color Ajustment

Trilinear interpolation between the 8 corners of the color cube (black, red, green, blue, cyan, magenta, yellow, white)

* Renaming

* overloading getadjustmentX()

* Renaming

* Additional renaming

* Added more RgbChannel

* Added more colors to channelAdjustment

* Added additional colors

* Added additional colors

* Added additional colors

* Added additional color adjustments

* Update MultiColorAdjustment.cpp

* Fixed black adjustment

* Color config in array form
2016-12-29 17:02:37 +01:00
brindosch
db5ce43202 Update hyperion.schema.json 2016-12-26 00:22:26 +01:00
redPanther
3746f643af multi bugfix pr ... (#348)
* move name to general
add a version for config file

* start impl. config migrator

* fix typo amd set access level

* fix schemaa name

* fix schema

* add structure for config migrator

* add more structural things for config migrator

* fix not all grabber provide live video

* add schema for trails
2016-12-24 10:02:12 +01:00
redPanther
0825937a3e move 'name' to new config section general. (#345)
* move name to general
add a version for config file

* start impl. config migrator

* fix typo amd set access level

* fix schemaa name

* fix schema

* add structure for config migrator
2016-12-23 19:37:35 +01:00
brindosch
88bed79c07 impl options explanation, uiLock (#343)
* update schemas

* update

* killed upstream change

* min prio is now 100

* reset watchdog regularly

* update

* fix

* update
2016-12-21 18:24:03 +01:00
redPanther
0414e3c860 implement states for components_autoselect and ledMAppingType via json (#344) 2016-12-20 19:55:54 +01:00
redPanther
c5e0299c55 adjustable image2led mode for grabbers (#341)
* implement most points for a adjustable image2leds mapping

* implement new adjustable led mapping type
2016-12-19 23:59:50 +01:00
redPanther
721668fc85 implement webui live video (#340)
* implement webui live video

* add missing german translation
2016-12-18 19:00:14 +01:00
redPanther
23194730c2 v4l: make suggestions for all no signal values (#339)
* on v4l screenshot, print out nosignal threshold values

* separate fractional parameters for no signal detection

* fully implement handling for "rainbow grabber"

* hyperion-v4l2 --screenshot can also evaluate best reagion and color for no signal detection

* tune output of no signal detection

* v4l outputs warninsg only, todo: make it adyustable

* typo

* v4l signal detection, now with validation checks

* remove obsolete schema files

* fix code style

* fix text typos

* code style
2016-12-18 00:47:53 +01:00
Paulchen Panther
8aa0fbaa1e Logger output in WebUI (#337)
* expanding logging result array of JSON request

* matching web logging output to console
2016-12-17 22:14:30 +01:00
penfold42
cb7e2ff1c0 Re-introduce hsv transform into config schema. (#336)
iOS app needs this (at the moment) and i needs to be able to set the inital config from the config file.
2016-12-17 09:23:22 +01:00
redPanther
d59c94421d Kill "Rainbow lights" when v4l grabber has no signal (#334)
* on v4l screenshot, print out nosignal threshold values

* separate fractional parameters for no signal detection

* fully implement handling for "rainbow grabber"
2016-12-16 19:48:43 +01:00
Paulchen Panther
b227f5a71c Overwrite custom created effect config when effect name is exist (#335)
* Overwrite exist Effects

* move find_schema and find_effect struct to include file
2016-12-16 19:48:15 +01:00
redPanther
a724fd1535 detect config is readonly, adalight and other stuff (#333)
* update lightberry sketches
update compilehowwto (windows disclaimer)
some refactoring in main cmakelists + preparation for windows compile
tune ada driver, set delayAfterConnect default to 1.5s because some arduino (e.g. mega r3) needs this
set priority min/max for grabber/network services - prevent colliding prios between webui/background stuff and grabbers/net services

* add check if config is writable. TODO do something usefull in webui

* fix indention error

* fix typo

* fix webui can't write led config

* typo

* fix cmakelists

* change methode of detecting linux
2016-12-14 22:45:00 +01:00
redPanther
0e6866fb23 fix adalight in lightberry mode
fix issue #332
2016-12-12 23:28:27 +01:00
ntim
2410c6021e Added missing json document compilation to states retrieval. (#321) 2016-12-09 22:26:18 +01:00
brindosch
0d114ca728 localStorage for i18n/access (#318)
* upd

* upd

* .

* enumtr

* cleanup

* upd

* update js

* update html

* hide buttons, if browser not comp, fix typo

[skip ci]

* fix empty effect name
2016-12-08 23:39:41 +01:00
redPanther
7adaaffc0a fix initial reset 2016-12-05 22:46:58 +01:00
penfold42
ec283cc22b fix for LPD8806 issue (#315)
make writebytes call consistent with other devices
2016-12-05 22:46:04 +01:00
redPanther
9428586195 Json write (#313)
* always output latest version of config file to webui

* fix permissions after default config export

* tune code

* set permissions for exported effects

* use qt setperm instead of chmod
update effects code style a bit

* add fallback when config is not readable

* ui: when sending config, convert to utf8 to save size and avoid jumbo frames (todo: minify it)
jsonclient: add some constants for websocket frames (taken from https://github.com/zaphoyd/websocketpp/blob/master/websocketpp/frame.hpp)

* webui:
refactory of websocket connector
sended json data is always convert to utf8
2016-12-05 11:10:44 +01:00
brindosch
8d55154164 Transit translation system (#309)
* update schemas

* update schemas

* update schemas

* schema update

* update translation

* upd
2016-12-04 19:32:23 +01:00
redPanther
5b0e401ca5 always output latest version of config file to webui (#307)
* always output latest version of config file to webui

* fix permissions after default config export

* tune code

* set permissions for exported effects

* use qt setperm instead of chmod
update effects code style a bit

* add fallback when config is not readable
2016-12-03 21:11:52 +01:00
redPanther
96e8c29582 refresh time for all devices + schema fixes (#305)
* refresh for all :-)
remove dups

* - integrate refresh leds for all devices
- fix schemas for led devices

* add minimum for rewrite time

* rewriteTime: add missing info in config examples
2016-12-02 12:07:24 +01:00
redPanther
9ddbf81810 merge adalight and adalightapa102 (#303)
if you want to use adalightapa102 driver, select adalight and set
lightberry_apa102_mode : true
in device config. Default is standard adalight
2016-12-01 16:17:14 +01:00
penfold42
1670ec58a7 led device cleanup, bug fix and schemas (#304)
* sk6812SPI was buggy
cleaned up code - make sk6812spi and ws2812spi more consistent

* led device schema updates
2016-12-01 16:16:59 +01:00
penfold42
080059cbf5 Added latchtime web configuration for ws2801 device. (#302)
* Added latchtime web configuration for ws2801 device.
Fixed default to be 500000ns

* cleaner code using defaults and added "ns" to web schema

* oops... "ns" not "ms"
2016-12-01 10:00:52 +01:00
brindosch
3e5ca4601d Update webui (#301)
* update

* update

* fix

* implement opt groups

* spaces

[skip ci]

* page wrapper adjust

[skip ci]

* implement optgroups for remote, adjust effect schemas

* lost id

[skip ci]
2016-11-30 17:32:12 +01:00
redPanther
81dea1583d update adalight sketch (#299)
* rename platform rpi-pwm to rpi. remove original rpi platform
install symlink to bin folder
create effects folder for custom effects

* fix osx jobs evaluation

* - add rewrite time to serial leds
- rework adalight sketch

* add analog output

* adalight: add analog mode: last led

* tune adalight sketch to final state
move refresh code to leddevice base class, so every leddevice can use it
2016-11-29 23:14:15 +01:00
redPanther
1b62d9d717 Logbuffer (#298)
* - implement a global logbuffer
- providerrs232 reduce log spam

* logger add signal and start json push

* implement logger notifier ... need some cleanup

* imlement logview in webui - the layout stuff is basic atm and needs some tuning
2016-11-26 22:46:16 +01:00
redPanther
73406c982b global logbuffer (#297)
* - implement a global logbuffer
- providerrs232 reduce log spam

* logger add signal and start json push

* implement logger notifier ... need some cleanup
2016-11-26 22:34:46 +01:00
Paulchen Panther
8f67294de6 Implement "reloadEffects" function in Hyperion for "write and delete" custom created effect configuration files (#293)
* Update EffectEngine.h

* add reloadEffects function

* add readEffects function

* add reloadEffects function

* Call reloadEffects after handleCreateEffectCommand and handleDeleteEffectCommand
2016-11-20 18:41:10 +01:00
Paulchen Panther
c2faf07574 Delete custom created effect configurations with JSON RPC (#289)
* Add ability to delete custom created Effects

* Add deleteEffect function to Hyperion-Remote

* Add deleteEffect function to Hyperion-Remote

* Update schema.json

* Update JsonSchemas.qrc

* Add schema-delete-effect.json

* Add deleteEffect function to JSON RPC

* Add deleteEffect function to JSON RPC

* Add Effect configuration file (.json) to Effect Definition

* Update EffectDefinition.h
2016-11-18 18:39:21 +01:00
penfold42
4972bc086a Remove old LedDeviceWS2812b PWM device which wont work on RPi >= 2 (#288) 2016-11-18 18:39:08 +01:00
Rick164
39593c508a Fixed QHostAddress address binding for AtmoOrb (#285) 2016-11-11 23:30:57 +01:00
Paulchen Panther
08dfec20c5 Adding the possibility to test new Effects ... (#282)
* Update effects_configurator.html

* Update content_effectsconfigurator.js

* Update hyperion.js

* Update de.json

* Add argument QString "pythonScript" to runEffect function

* Update Hyperion.h

* Update EffectEngine.cpp

* Update Hyperion.cpp

* Update JsonClientConnection.cpp

* Update schema-effect.json
2016-10-30 22:59:45 +01:00
brindosch
864538f188 Effects Configurator (#281)
* update translation

* add css

* Update JsonClientConnection.cpp

* add effectscreator

* remove udp

* fix title c/p issue for sparks

[skip ci]

* update schemas

[skip ci]

* typo

[skpi ci]
2016-10-30 17:54:38 +01:00
Paulchen Panther
fab0c208fe Create Effect configuration files (.json) with JSON RPC (#277)
* Add getEffectSchemas and loadEffectSchema function

* Add getEffectSchemas function

* add effect schema files to internal resources

* Add loadEffectSchema and getEffectSchemas function

* add effect schema resources

* add getEffectSchemas function

* extend handleSchemaGetCommand to get ...

... all available effect schemas
add handleCreateEffectCommand function

* add handleCreateEffectCommand function

* include schema-create-effect.json file

* add create-effect schema

* Add schema-create-effect.json file

* Add createEffect to hyperion-remote

* Add createEffect function

* add createEffect function

* Create fade.schema.json

* Add files via upload

* Add files via upload

* Update police.schema.json

* Update EffectEngine.qrc.in

* Update CMakeLists.txt
2016-10-24 23:52:53 +02:00
brindosch
2cc4cdde26 Update QJsonSchemaChecker.cpp 2016-10-16 17:34:20 +02:00
redPanther
1565d60d86 fix json double evaluation for effects 2016-10-14 20:59:03 +02:00
redPanther
f881a0abe3 fix effect overlay not evaluated correctly 2016-10-14 20:13:45 +02:00
Paulchen Panther
464de381a0 JsonCpp to QTJson (Final Part) (#273)
* Update CMakeLists.txt

* Update Hyperion.h

* Update LedDevice.h

* Update LedDeviceFactory.h

* Update Hyperion.cpp

* Update LedString.cpp

* Update JsonClientConnection.cpp

* Update LedDeviceAdalight.cpp

* Update LedDeviceAdalight.h

* Update LedDeviceAPA102.cpp

* Update LedDeviceAdalightApa102.h

* Update LedDeviceAdalightApa102.cpp

* Update LedDeviceAPA102.h

* Update LedDeviceAtmo.cpp

* Update LedDeviceAtmo.h

* Update LedDeviceAtmoOrb.cpp

* Update LedDeviceAtmoOrb.h

* Update LedDeviceDMX.cpp

* Update LedDeviceDMX.h

* Update LedDeviceFactory.cpp

* Update LedDeviceFadeCandy.cpp

* Update LedDeviceFadeCandy.h

* Update LedDeviceFile.cpp

* Update LedDeviceFile.h

* Update LedDeviceHyperionUsbasp.cpp

* Update LedDeviceHyperionUsbasp.h

* Update LedDeviceLightpack.cpp

* Update LedDeviceLightpack.h

* Update LedDeviceLpd6803.cpp

* Update LedDeviceLpd6803.h

* Update LedDeviceLpd8806.cpp

* Update LedDeviceLpd8806.h

* Update LedDeviceMultiLightpack.cpp

* Update LedDeviceMultiLightpack.h

* Update LedDeviceP9813.cpp

* Update LedDeviceP9813.h

* Update LedDevicePaintpack.cpp

* Update LedDevicePaintpack.h

* Update LedDevicePhilipsHue.cpp

* Update LedDevicePhilipsHue.h

* Update LedDevicePiBlaster.cpp

* Update LedDevicePiBlaster.h

* Update LedDeviceRawHID.cpp

* Update LedDeviceRawHID.h

* Update LedDeviceSedu.cpp

* Update LedDeviceSedu.h

* Update LedDeviceSk6812SPI.cpp

* Update LedDeviceSk6812SPI.h

* Update LedDeviceTinkerforge.cpp

* Update LedDeviceTinkerforge.h

* Update LedDeviceTpm2.cpp

* Update LedDeviceTpm2.h

* Update LedDeviceTpm2net.cpp

* Update LedDeviceTpm2net.h

* Update LedDeviceUdpE131.cpp

* Update LedDeviceUdpE131.h

* Update LedDeviceUdpH801.cpp

* Update LedDeviceUdpH801.h

* Update LedDeviceUdpRaw.cpp

* Update LedDeviceUdpRaw.h

* Update LedDeviceWs2801.cpp

* Update LedDeviceWs2801.h

* Update LedDeviceWS2812b.cpp

* Update LedDeviceWS2812b.h

* Update LedDeviceWs2812SPI.cpp

* Update LedDeviceWs2812SPI.h

* Update LedDeviceWS281x.cpp

* Update LedDeviceWS281x.h

* Update ProviderHID.cpp

* Update ProviderHID.h

* Update ProviderRs232.cpp

* Update ProviderRs232.h

* Update ProviderSpi.cpp

* Update ProviderSpi.h

* Update ProviderUdp.cpp

* Update ProviderUdp.h

* Update LedDevice.cpp

* Update CMakeLists.txt

* Update hyperiond.cpp

* Update hyperiond.h

* Update TestSpi.cpp

* Delete AUTHORS

* Delete CMakeLists.txt

* Delete LICENSE

* Delete json_batchallocator.h

* Delete json_internalarray.inl

* Delete json_internalmap.inl

* Delete json_reader.cpp

* Delete json_tool.h

* Delete json_value.cpp

* Delete json_valueiterator.inl

* Delete json_writer.cpp

* Delete sconscript

* Delete autolink.h

* Delete config.h

* Delete features.h

* Delete forwards.h

* Delete json.h

* Delete reader.h

* Delete value.h

* Delete writer.h
2016-10-13 21:59:58 +02:00
redPanther
48d8781cdf auto generation of initial config file (#271)
* - remove feature of using multiple config files for automaticly start other hyperion instances
- add auto config file creation
- tune service files

* add auto path creation for initial default config

* debian package:
rename service to hyperiond
remove copy of config file
2016-10-13 21:59:10 +02:00
Paulchen Panther
ebbb6b9440 JsonCpp to QTJson (Part 5) (#270)
* Update Hyperion.h

* Update ImageProcessorFactory.h

* Update ProtoConnection.h

* Update WebConfig.h

* Update CMakeLists.txt

* Update Hyperion.cpp

* Update CMakeLists.txt

* Update CMakeLists.txt

* Update CgiHandler.cpp

* Update CgiHandler.h

* Update WebConfig.cpp

* Update CMakeLists.txt

* Update hyperion-remote.cpp

* Update JsonConnection.cpp

* Update JsonConnection.h

* Update hyperiond.cpp

* Update hyperiond.h

* Delete JsonFactory.h

* Delete JsonSchemaChecker.h

* Delete JsonSchemaChecker.cpp

* Update WebConfig.cpp
2016-10-11 19:51:20 +02:00
redPanther
37558a983f fix restart of hyperion. now devices closed before restart (#269) 2016-10-10 23:08:01 +02:00
redPanther
e889996ae7 implement optional color correction for V4L only (#267)
* remove color temperatire, its the same as color adjustment

* remove temperature from schema

* implement most part of v4l only colro settings,
now hyperion update knows from which component the colors come

* update configs

* fix webui config write

* reomve correction and temperature from hyperion-remote
2016-10-10 18:29:54 +02:00
Paulchen Panther
d9c2a2d91a JsonCpp to QTJson (Part 4) (#266)
* Update ActiveEffectDefinition.h

* Update EffectDefinition.h

* Update EffectEngine.h

* Update Hyperion.h

* Update LedDevice.h

* Update QJsonFactory.h

* Update QJsonSchemaChecker.h

* Update Effect.cpp

* Update Effect.h

* Update EffectEngine.cpp

* Update Hyperion.cpp

* Update JsonClientConnection.cpp

* Update JsonClientConnection.h

* Update schema-config.json

* Update LedDevice.cpp

* Update QJsonSchemaChecker.cpp

* Update hyperion-remote.cpp

* Update JsonConnection.cpp

* Update JsonConnection.h

* Update hyperiond.cpp
2016-10-09 22:22:17 +02:00
redPanther
0a142b0e7d implement a function for easy json editor creation (#264)
* implement a function for easy json editor creation

* grabber and kodi moved to new editor func

* webui: implement conf editors

* add missing files and remove debug code
2016-10-09 10:23:04 +02:00
penfold42
b42f3453b4 Updated comments in led device headers (#265) 2016-10-08 13:52:22 +02:00
redPanther
5aac2be702 Leddevice refactoring the next next part (#263)
* switch rs232 provider to completly async transfer

* start of implementing a seperate init function for leddevices

* rename setconfig to init

* more fixes

* implement missing code

* fix code style

* remove debug  code

* remove  debug stuff

* set loglevel to original state
2016-10-08 08:14:36 +02:00
Robin Kobus
3156488b68 Smoothing Fix (#261)
Increase color change for small RGB differences.
2016-10-04 22:13:29 +02:00
redPanther
89afedf3d5 light clock (#260)
* extend image effects
add a basic light clock

* add alpha values  to rainbow

* some effect tuning

* make seconds hand optional and change color to yellow
make blue hours hand always visible
2016-10-01 21:34:30 +02:00
redPanther
5aa9edc1cd fix input selection wont work when color is set (#259) 2016-09-30 19:26:31 +02:00
penfold42
6a26e4fd5f Added avahi/bonjour advertisement to webconfig (#258) 2016-09-26 17:50:31 +02:00
penfold42
d095b355b1 Dmx512 Rs232 support (#256)
* Started work on DMX512 rs232 device
cloned from sedu - no actual changes yet

* Implemented DMX protocol
Added baudrate debugging to ProviderRs232

* Added support for multiple DMX fixture types
2016-09-26 17:50:11 +02:00
redPanther
d1e165a753 switch rs232 provider to completly async transfer (#255) 2016-09-25 22:20:01 +02:00
Paulchen Panther
f146894799 JsonCpp to QTJson (Part 3) (#257)
* Update BlackBorderProcessor.h

* Update Hyperion.h

* Update ImageProcessor.h

* Update ImageProcessorFactory.h

* Update LedString.h

* Update BlackBorderProcessor.cpp

* Update ImageProcessor.cpp

* Update ImageProcessorFactory.cpp

* Update Hyperion.cpp

* Update hyperiond.cpp

* Update TestImage2LedsMap.cpp

* Update TestBlackBorderProcessor.cpp

* Update Hyperion.cpp

* Update Hyperion.cpp
2016-09-25 21:59:31 +02:00
redPanther
d6a34edfb2 Leddevice refactoring the next part (#253)
* add general switchOff

* refactoring of leddevices regarding ledcount and switchoff

* remove obsolete includes
2016-09-23 08:49:22 +02:00
redPanther
5aeec2e1e5 fix last merge 2016-09-22 14:28:23 +02:00
redPanther
9cfefda7ce fix last merge
[skip ci]
2016-09-22 14:27:09 +02:00
redPanther
e58d7b27eb fix last merge 2016-09-22 14:26:24 +02:00
redpanther
4c78302473 Merge branch 'h801' of https://github.com/WoLpH/hyperion.ng into WoLpH-h801
Conflicts:
	libsrc/leddevice/LedDeviceTpm2net.cpp
	libsrc/leddevice/LedDeviceUdpRaw.cpp
	libsrc/leddevice/ProviderUdp.cpp
	libsrc/leddevice/ProviderUdp.h
2016-09-22 13:57:52 +02:00
redPanther
b8f1ad50b9 add ability for default values in providerudp (#251)
* add ability for default values in providerudp

* udp: move switchOff into baseclass

* udp: more code cleanups
2016-09-22 09:19:31 +02:00
Rick van Hattem
ad785b9eba implemented bare providerudp constructor and made h801 use it 2016-09-22 00:18:46 +02:00
Rick van Hattem
37130f9c9b Merge remote-tracking branch 'redPanther/leddevice' into h801 2016-09-21 23:32:19 +02:00
Rick van Hattem
3feb905a00 reformatted code and added the new defaults from @redpanther 2016-09-21 23:32:17 +02:00
redpanther
a86b3a2335 add ability for default values in providerudp 2016-09-21 23:08:13 +02:00
Rick van Hattem
da6dfc8ed4 removed useless destructor 2016-09-21 23:07:14 +02:00
Rick van Hattem
c008f6c1bb Merge remote-tracking branch 'hyperion-project/master' into h801 2016-09-21 23:03:53 +02:00
Rick van Hattem
1fb2f6be0b initial version of h801 led device 2016-09-21 23:03:01 +02:00
redPanther
f88cd3a230 extend effect engine with qt image effects (#249)
* - effects now can use qt image effects
- rainbow swirtl is now suitable for any led layout - including matrix

* fix rainbow effect

* effect: add radialGradient

* fix some js errors

* optimize code

* try fix travis test not working as expected

* fix default config files

* fix config
2016-09-21 22:01:50 +02:00
redPanther
c183037872 hot fixing missing schema attribut append 2016-09-19 23:25:44 +02:00
brindosch
f349f4b0ee forms: horizontal layout and unit support (#245)
* update

* sync

[skip ci]

* always required

[skip ci]

* append support

* update schemas

[skip ci]

* typo

[skip ci]

* adjustment

* update

[skip ci]

* sync

[skip ci]

* slightly smaller logo

[skip ci]

* also for checkboxes

[skip ci]

* new connection lost page

[skip ci]

* update con_lost page

[skip ci]

* lost change

[skip ci]

* fix center position

[skip ci]
2016-09-17 23:37:44 +02:00
redPanther
858125510e hyperiond: add ability to export default config and effects (#244)
* - embed default config
- add possibility to export effects and embeded default config to filesystem

* do some code style
2016-09-17 00:40:29 +02:00
redPanther
eeb9b0f7da implement hyperion restart via webui (#242)
* first try

* implement hyperion restart. core function is good, but needs a beeter structuring- something for next refactoring session ;-)

* several fixes (including osx)
merge with upstream
some refactoring

* add some eye candy to webui
2016-09-15 20:42:58 +02:00
brindosch
a04f34eab7 update schemas | mod jsoneditor (#243)
* update

* sync

[skip ci]

* always required

[skip ci]
2016-09-15 19:06:21 +02:00
redPanther
30a667c610 fix 241 2016-09-14 17:28:03 +02:00
redPanther
1cc2f72fa2 embedded webui + config modification detection (#240)
* implement embedded webui

* add detection for changed config, later on used for restart hyperion
2016-09-14 13:51:28 +02:00
redPanther
ccc50899fb make shared libs work again (#239) 2016-09-13 17:39:01 +02:00
penfold42
52283b3257 Added debug logging of the Ada header bytes that are sent (#238)
[HYPERIOND LedDevice] <DEBUG> <LedDeviceAdalight.cpp:52:write()> Adalight header for 316 leds: Ada 0x01 0x3b 0x6f
2016-09-13 14:25:42 +02:00
redPanther
adfe2a4b23 effects included in hyperiond binary as qtResource (#237)
* implement effects included in hyperiond  binary

* cleanup

* remove install of effects dir. People who wants to develop effects has to copy them from github
effect params for initial effects can be changed in config permanently and other effect params can be changed
via json (currently only temporarily)

* fix schema of fadecandy
webui fix display of specific led options

* add leddevice write support

* cleanup

* webui: tune hue code

* when use json effect definition from putsiede hyperiond but want to use py script from inside hyperiond use ad a :
e.g. fade.py needs a fade.py near the json file, but :fade.py is taken from resource inside hyperiond

* add ability to di

* add abiloty to diable effcts via hyperion config

* use effect name instead of script in active effects and prio register

* finally solve open file handle during effect is playing. Now script is read before, then file closed and then t is run by python

* fix some webui things
- led config tabs
- inital loading screen

optimize qrc file generation
fix compile warning in hyperion.cpp

* cleanup

* more cleanup
2016-09-13 11:51:16 +02:00
redPanther
82611afa25 webui: some editor style tweaks (#234)
* initial support for leddevice options

* fix schema and editor init

* fix led editor labels and schema

* add some led schemas

* led config: insert current values. not yet perfect, but it works

* tune editor style
2016-09-10 23:30:05 +02:00
redPanther
2d88cdc2d3 webui: initial support for leddevice options (#232)
* initial support for leddevice options

* fix schema and editor init

* fix led editor labels and schema

* add some led schemas

* led config: insert current values. not yet perfect, but it works
2016-09-10 19:08:08 +02:00
redPanther
951aab1c9d Update LinearColorSmoothing.cpp
disable smooth timer when disabled
2016-09-08 18:07:57 +02:00
redPanther
36124c9afb make blackboder component enable/disable at runtime (#228)
* make enable/disable of bborder work

* fix typo

* smoothing can be disabled via config again

* fix smoothing
2016-09-08 16:32:42 +02:00
redPanther
2beccb0912 Webui: extend led hardware config + connection lost page (#226)
* split content and js
tune leds config

* implement connection lost page

* split js/html in huebridge

* add js action for connection lost

* extend led config
make connection loss nicer

* tune led code
add menu entry for grabber

* more tuning of webui

* switch back to botstrap textarea
add v4l to components

* add icon

* extend schema for jsoneditor

* implement ledcolors streaming with 4fps

* implement component state
2016-09-07 20:10:37 +02:00
redPanther
4c6a4a1f93 fix effect prio unregister 2016-09-06 11:18:29 +02:00
redPanther
bbffa078fd Webui: view led configuration + lights (#223)
* make hyperion websocket api event based

* implement new websocket handling for generalconf

* migrate all webui stuff to new event based websocket api
some cleanup ... now all html templates are in content
refactoring of web stuff

* add hyperionport to global
start impl. removing advanced key

* separate dashboard
serverinfo is updated every 3 seconds automatily
add input selection
cleanup and remove not needed stuff

* prepare infrastructure for server sided file execution

* webui minor fixes

* fix compile

* implement led layout view with live colors

* live led vies

* fix general conf
unrigister ledcolors request, when not on leds.html

* fix compiler warning

* prepare realtime ledview and enhance ui
2016-09-05 17:26:29 +02:00
penfold42
49d3d35de1 Ws2812spi and sk6812rgbw have wrong default rate (#221)
* Changed default baud rate in schema for ws2812spi and sk6812spi

* now sets the default baud_rate speed to 2800000 if omitted.
Previously it used the ProviderSPI default which was 1000000 and guaranteed not to work

* Added warnings if the SPI baud rate is likely out of range
Added some debug statements to ProviderSpi
2016-09-04 14:28:06 +02:00
penfold42
4968a11816 Tpm2net rewrite (#217)
* initial tpm2net rewrite - doesnt compile yet

* new tpm2.net drive compiles.
rename old tmp2net typos to tpm2net
fixed compiler warning in ws2812b

* added packetsize calculations and the end of frame character.
Output looks good on tcpdump

* removed old tpm2net driver
renamed tpm2netnew to tpm2net
2016-09-04 09:07:10 +02:00
redPanther
4a27f3d43e refactoring of webui and event based websocket layer (#219)
* make hyperion websocket api event based

* implement new websocket handling for generalconf

* migrate all webui stuff to new event based websocket api
some cleanup ... now all html templates are in content
refactoring of web stuff

* add hyperionport to global
start impl. removing advanced key

* separate dashboard
serverinfo is updated every 3 seconds automatily
add input selection
cleanup and remove not needed stuff

* prepare infrastructure for server sided file execution

* webui minor fixes

* fix compile
2016-09-03 15:54:33 +02:00
brindosch
c17c3bd273 Add more schemas + webui integration (#218)
* update schema
... need some fixing regarding schema, will come in next commit
2016-09-02 19:29:04 +02:00
redPanther
06c878e76f fix amlogic for newer kernels (#214)
* fix amlogic for newer kernels
crosscompile stay on 32bit aml with kernel 3.10

* add new platform amlogic64. This is used e.g. for new wetek boxes hub and play2
2016-09-02 07:41:27 +02:00
redPanther
ee26abc6c4 Merge pull request #212 from b1rdhous3/editor
New Json Editor
2016-08-31 18:03:53 +02:00
b1rdhous3
752b32c906 Merge index.html and QJsonSchemaChecker changes 2016-08-31 17:19:41 +02:00
redPanther
742ad9df08 multiple v4l devices. (#210)
* implement use of multiple v4l devices.
Not all v4l devices are compat with that or must be attaches to different usb controllers

* fix typo in config
spilt grabber components in "GRABBER" and "V4L"
2016-08-31 10:13:43 +02:00
penfold42
44579f85eb changed debug to error 2016-08-31 17:51:50 +10:00
penfold42
fa152b4560 Added debug logging to ProviderSpi.cpp on writes.
If you have more leds configured than the SPI buffer can support you now get this:
[HYPERIOND LedDevice] <DEBUG> <ProviderSpi.cpp:92:writeBytes()> SPI failed to write. errno: 90, Message too long
2016-08-31 17:34:52 +10:00
redpanther
9a2b167db7 fix typo in config
spilt grabber components in "GRABBER" and "V4L"
2016-08-31 00:54:47 +02:00
b1rdhous3
b6cec24596 Update 2016-08-31 00:46:39 +02:00
b1rdhous3
019e3f5d0c New JSON Editor 2016-08-31 00:22:17 +02:00
b1rdhous3
dae32f72bf Merge remote-tracking branch 'refs/remotes/hyperion-project/master' into editor
# Conflicts:
#	assets/webconfig/index.html
2016-08-30 23:50:26 +02:00
b1rdhous3
7009aa50ed New JSON Editor 2016-08-30 23:49:21 +02:00
brindosch
0603fadd21 Web: Centralize websocket, add json port changer and led schemas (#209)
* add comp test

* update web

* .

* typo

[skip ci]
2016-08-30 23:25:27 +02:00
redpanther
a85a5c0f2c implement use of multiple v4l devices.
Not all v4l devices are compat with that or must be attaches to different usb controllers
2016-08-30 22:28:13 +02:00
Rick van Hattem
61db9f43b8 Qcommandlineparser (#199)
* Replaced getoptplusplus with QCommandLineParser. Fixes #39

* enabling C++11 if possible

* enabling C++11 if possible

* fixed gcc compilation issues

* fixed linux builds and improved os x build

* trying to fix dispmanx

* trying to fix dispmanx

* simplified travis build script

* fixed argumentparser default values

* rewrote validator system and made sure default arguments are processed correctly

* rewrote validator system and made sure default arguments are processed correctly

* fixed bool vs. regular options

* oops... removing debug code

* reverted screenshot api change
2016-08-28 15:10:43 +02:00
penfold42
c13f2e20ec Added source and cid to e1.31 driver. (#207)
source defaults to "hyperion on <hostname>"
cid defautls to randomly generated on each startup

        "device" :
        {
                "name"       : "DMX_e131",
                "type"       : "e131",
                "universe"   : 1,
                "cid" : "{204b83c-efb5-4b23-b2d0-35939d561061}",
                "source-name": "This is my custom e1.31 source",
                "host"       : "239.255.0.1",
                "port"       : 5568,
                "colorOrder" : "rgb"
        },
2016-08-28 10:45:18 +02:00
penfold42
cc8185691a Renamed the lowlevel providers from LedXXXDevice to ProviderXXX (#206)
%s/LedUdpDevice/ProviderUdp/g
git mv LedUdpDevice.cpp ProviderUdp.cpp
git mv LedUdpDevice.h ProviderUdp.h

vi `grep -l LedHID *`
%s/LedHIDDevice/ProviderHID/g
git mv LedHIDDevice.cpp ProviderHID.cpp
git mv LedHIDDevice.h ProviderHID.h

vi `grep -l LedRs *`
%s/LedRs232Device/ProviderRs232/g
git mv LedRs232Device.cpp ProviderRs232.cpp
git mv LedRs232Device.h ProviderRs232.h

vi `grep -l LedSpi *`
%s/LedSpiDevice/ProviderSpi/g
git mv LedSpiDevice.cpp ProviderSpi.cpp
git mv LedSpiDevice.h ProviderSpi.h
2016-08-28 07:12:47 +02:00
penfold42
9cc3a2de2e LedUdpDevice now tries to parse the "host" as an IP address before trying to DNS resolve it (#205) 2016-08-27 14:05:09 +02:00
brindosch
13cc053d99 fix jsonrpc (1/2)
NO CI no ci [no ci]
2016-08-25 13:52:31 +02:00
penfold42
cea4db8e60 Fix throw error in udp, fix default SPI device (#198)
* Fix throw error so it correctly fails on invalid output hostnames

* Fixed broken default /dev/spidev0.0 string

* UDP devices now use "host" and "port" rather than "output"
2016-08-24 06:05:00 +02:00
redPanther
d679affeb4 Leddevice rework2 (#193)
* commit debug code to save it due to merge

* migrate first devices to new device registry and configure on runtime

* fadecandy and rs232 resets device if config is set

* try to hunt crash on osx

* test commit if this works with osx

* refactor spi devices

* cleanup

* refactor leddevices file, tinkerforge and ws2812b

* refactor raw usb devices

* refactor udp devices

* - add tpm2net driver
- remove old udp driver from build (files left in place for reference for new udp driver)
- json serverinfo shows available leddevices

* finish rework part 2 of leddevices

* add schemas for leddevices.
currently only compiled in, but not usedx
2016-08-23 20:07:12 +02:00
Paulchen-Panther
62a24348f9 Fix "if" statement in XShmGetImage check and other things (#192)
* Fix "if" statement

Nach dem testen des Codes, leider übersehen und nicht rückgängig gemacht.
Entschuldigung.

* Move XRenderSetPictureFilter from "grab" to "setupResources" part

* Resize destination image to target screen dimension once

* Fix coding style and add check for image resize
2016-08-23 07:04:57 +02:00
Paulchen-Panther
6acf68c87e Update X11 Grabber (scaling improvements) (#191)
* Add transform Matrix for scaling

* Add Image scaling by XRender

* Coding Style correction
2016-08-22 11:59:07 +02:00
penfold42
c8318ff0c7 support > 170 leds with E1.31 (#189)
* Add support for > 170 leds. These are send as multiple packets
Change default latchtime to be smaller

* code cleanup

* more code tidying
added *.swp to gitignore
2016-08-20 22:39:21 +02:00
penfold42
85e3f154d6 DMX512/sACN/E1.31 support (#184)
* Started on support for sACN/E1.31/DMX512
Just a clone of udpraw for now

* It's ALIVE!!
This adds somewhat working DMX512/sACN/E1.31 support.
I've tested it against an ESPixelStick but have no other "real" hardware
TODO:
configure universe#
configure universe and led offset
configure source names (all hard coded now...)

* oops.... forgot that dmx element 0 isnt rgb data but needs to be zero

* added universe support in the config
assorted code cleanups
2016-08-19 17:14:52 +02:00
redPanther
55cc06615b hot fix for json checker
now shema extension with 'default' 'title' and 'description' is valid for the checker
2016-08-19 08:50:48 +02:00
b1rdhous3
d8f6f86948 Example JSON Form Example with General setting (#185)
I have created a new Category "General" with several Settings for
Hyperion.
For now the Submit Button only console.log's the values.

Known Bug: For some reason it seems to do not load the bootstrap
correctly or maybe the Lib isn't compatible with the newest version of
bootstrap.
2016-08-18 21:14:50 +02:00
Paulchen-Panther
b9ad2977de Update and fix JSON writer (#183)
* Fixing the check of createKey in handleConfigSetCommand

* Update schema-config.json

* add overwrite option to configset command

* add overwrite option to setConfig function

* add overwrite option to setConfig function
2016-08-18 21:11:21 +02:00
redPanther
e46d392ed1 - in json reply the command is written again, to better identify it. (#182)
- also added a transaction number (tan). This is a user defined number to track exactly every reply
2016-08-17 11:46:36 +02:00
redPanther
f6f7f55e92 fix warning 2016-08-16 18:14:36 +02:00
redPanther
26a70170fb webserver fix (#181)
fix default index.html in subfolders
fix \r\n appended to data
2016-08-16 17:12:47 +02:00
redPanther
8e8c21fa3b add command for getting schema via json api (#179)
* - update coding style
- add command for getting schema via json api
- json api: merge config commands into one single "config" command with subcommands

* make setconfig work
2016-08-15 22:32:01 +02:00
Paulchen-Panther
68fd395670 JSON RPC Writer (configSet) (#175)
* Remove "endOfJson" Value

Deprecated value from Hypercon

* Remove "endOfJson" Value

Deprecated value from Hypercon

* Add writeJson function to JsonFactory

* ability to ignore required value in schema file

* Remove "endOfJson" Value

* Add handleConfigSetCommand function

* Add handleConfigSetCommand function

* Update JsonSchemas.qrc

* Update schema.json

* Update JsonSchemaChecker.cpp

* Add configSet command to Hyperion-remote

* Add setConfigFile function

* Add setConfigFile function

* Add schema-configset.json
2016-08-14 20:17:12 +02:00
redPanther
97181fa83c leddevice refactoring. code style and extension of baseclass to avoid dups (#174) 2016-08-14 10:46:44 +02:00
penfold42
5a902add81 Added "invert" and "spimode" options to ws2801, ws2812spi and sk6812spi devices (#172)
* Added "invert" and "spimode" options to ws2801, ws2812spi and sk6812spi devices

* fixed test/TestSpi.cpp

* some coding style wish
2016-08-13 19:54:08 +02:00
redPanther
9c27db390d Kodi initial fix (#171)
* fix #158

* fix initial state of playbackstate
2016-08-13 10:05:11 +02:00
redPanther
7ee2e7cf8d rework kodi grabbing mode for all grabbers (#169)
* pull out setgrabbing mode from every grabber into parent class

* implement optional kodi check for v4l

* fix typo

* fix dispmanx build
2016-08-12 23:07:32 +02:00
redPanther
050ab11c8e v4l grabber wont crash hyperiond anymore (#168)
* v4l errors won't lead to crash hyperiond (exceptions are catched)
v4l auto device mode with better log messages
createV4l in hyperiond.cpp refactored, now v4l is always available as long as it is compiled in

* change back, code accidently altered

* fix compile of dispmanx grabber
2016-08-12 09:39:41 +02:00
redPanther
f1cc82b8c7 enable components at runtime + grabber refactoring (#160)
* implement enable/disable on runtime for:
- smoothing
- kodi
- udplistener
- boblight

* implement enable/disable for forwarder
refactor component

* - implement grabber enable/disable at runtime
- big grabber refactoring. now with common base class for all grabbers

* implement enable/disable at runtime for bb detector

* osx fix

* try to fix cutted travis output for osx build
2016-08-11 07:13:55 +02:00
redPanther
cf2b8b88ee fix uncatched exception in json message handling (#164) 2016-08-10 19:53:53 +02:00
redPanther
d68071cda3 fix #158 (#161) 2016-08-10 06:54:20 +02:00
redPanther
197af35de0 Clone single led color from other led (#157)
* start ledclone

* led cloning: clone scan areas from original led
main: show exceptions, better exit

* tune json schema for new option. somwe cleanup

* fix warnings and bug for framebuffer selection. thx to clang brought by new osx buikld on travis

* make ledclone feature work flawlessly for effects too. Effect sees the ledstring without cloned leds.
cloned leds will be inserted just before sending to leddevice

additional: remove warnings and fix code style

* fix warning
2016-08-08 00:17:00 +02:00
Rick van Hattem
05812f107b Travis osx support (#155)
* fixed OS X compatibility

* adding OS X travis test

* ignoring autogenerated files

* adding OS X travis test

* fixed os x building

* fixed os x building

* reduced ignore file

* v4l osx issue fixed

* improved qt5 detection

* disabled cleaning of child threads on os x for the time being

* fixed avahi on OS X
2016-08-07 18:39:45 +02:00
penfold42
84c041a6fb updated more incorrect logging types (%s vs %d) (#156) 2016-08-07 07:06:56 +02:00
penfold42
d90a36d911 chealup of udp device. (#153)
left over unneeded spi include
variable cleanup
2016-08-06 08:58:41 +02:00
redPanther
817dabae8c sourceOff feature + small json refactoring (#151)
* add --sourceOff to hyperion-remote - this will select "off" source and set all leds to black
refactor new json stuff
make schema checker not so strict, do not require values that have defaults (not finished yet)
initialEffect config: effect is always an array, regardless if it is a color or an effect name

* make off source visible in active priority list

* transform initialeffect to qjson (except part of effect-args, this needs effectengine transformed to qjson)

* remove unneeded comment

* add web ui for source selection.
call http://hyperion_host:8099/select/index.html
current example needed json server on port 19444
2016-08-06 08:28:42 +02:00
penfold42
6b04c1571c Fix segmentation fault in usbasp led driver (#152) 2016-08-05 09:14:40 +02:00
Paulchen-Panther
bfb06966de Update Json Interface (Enable/Disable components during runtime) (#150)
* Update Hyperion.h

* Add files via upload

* Update CMakeLists.txt

* Update Hyperion.cpp

* Update JsonClientConnection.cpp

* Update JsonClientConnection.h

* Update JsonSchemas.qrc

* Add files via upload

* Update schema.json

* Update JsonConnection.cpp

* Update JsonConnection.h

* Update hyperion-remote.cpp
2016-08-04 13:10:53 +02:00
Paulchen-Panther
f183032270 JsonCpp to QTJson (Part 2) (#147)
* Replace std::string with QString

* Replace std::string with QString

* Replace std::string with QString

* Replace std::string with QString

* Convert JsonCPP Code to QTJson

Not all JsonCPP Code is converted to QTJson Code. See Pull Request for Details.

* Convert JsonCPP Code to QTJson

Not all JsonCPP Code is converted to QTJson Code. See Pull Request for Details.
2016-08-04 10:53:26 +02:00
Paulchen-Panther
0e2f0127fd Update Json Interface (return config file) (#144)
* Add handleConfigGetCommand Function

* Add handleConfigGetCommand Function

* Add schema-configget.json

* Add configget

* Add new JSON file schema-configget.json

* add --configget command to hyperion-remote

* Add getConfigFile function

* Add getConfigFile function
2016-08-03 22:03:19 +02:00
redPanther
722d4eb357 Manual input source select via json (#143)
* implement manual source select via json interface
fix schema error

* refactoring

* add visible value to all listed prios
2016-07-31 22:21:35 +02:00
redPanther
04ab2f05f7 color filter config additions (#142)
* add ability to disably specific color corrections
update protobuf external
move smoothing out of color section

* update config

* update schema

* update schema
2016-07-30 13:07:53 +02:00
redPanther
f1a4672a93 Amlogic box uses aml and fb buffer (#141)
* v4l: fix auto mode opens usable device twice

* on amlogic system, start framegrabber and amlogic grabber

* tune code formating

* make aml grabber always one prio below fb

* hyperiond refactoring

* refactor hyperiond grabber donfig code
add json clinet view of active and inactive input sources
2016-07-27 22:52:59 +02:00
Paulchen-Panther
b7d1fbf378 Fixing "Required" Tag (#140)
ok ich merge mal ... passt ja soweit
2016-07-26 14:53:27 +02:00
redPanther
6840d93206 v4l: fix auto mode opens usable device twice (#139) 2016-07-24 22:45:26 +02:00
redPanther
108e06ed46 LedDevicePhilipsHue: fix isNan sometimes not compile
sometime <cmath> is add automaticly, sometimes not. This leads to compile errors. Including <cmath> should fix this.

info taken from here:
http://en.cppreference.com/w/cpp/numeric/math/isnan
2016-07-24 22:43:26 +02:00
redPanther
b4d8d3989c fix missing logger init 2016-07-24 20:31:25 +02:00
redPanther
d551739903 fix amlogic logic leads to crash
... most of the format strings had wrong types
2016-07-24 19:56:41 +02:00
redPanther
30b9c20611 new frame grabber handling (#137)
* - implement framegrabber type option
- framegrabber autoselect
- integrate x11 grabber in hyperiond

* add doxy

* v4l: select device by name
hyperiond: fix x11 grabber connection to kodichecker
config: tune default prios of boblight and v4l

* make v4l name finding case insensitive
2016-07-24 15:18:34 +02:00
Paulchen-Panther
01ec4a3655 KODIVideoChecker Fix (#138)
* Update KODIVideoChecker.h

* Update KODIVideoChecker.cpp

* Update KODIVideoChecker.cpp
2016-07-24 13:56:13 +02:00
Paulchen-Panther
5bd8c33529 Add Screensaver mode to Kodi video checker (#132)
* Update KODIVideoChecker.h

* Update GrabbingMode.h

* Update AmlogicWrapper.cpp

* Update DispmanxWrapper.cpp

* Update FramebufferWrapper.cpp

* Update OsxWrapper.cpp

* Update KODIVideoChecker.cpp

* Update ProtoConnection.cpp

* Update X11Wrapper.cpp
2016-07-21 20:15:54 +02:00
redPanther
a930d4e403 fix logger crash (#136)
make logger don't crash when long messages put to logger. Currently longest message is 1024 chars. Longer messages are truncated
2016-07-21 20:12:51 +02:00
redPanther
fff42f370c fix serial port device crash (#134)
* fix resourceerror in serialport implemention and  extend error output

* cleanup

* fix json schema

* remove some nerd setting
2016-07-20 23:26:47 +02:00
Paulchen-Panther
230cf9e970 Rewrite JSONSchemaChecker to QT (#128)
* Add files via upload

* Update CMakeLists.txt

* Add files via upload

* Update TestConfigFile.cpp

* Update TestConfigFile.cpp

* Update TestConfigFile.cpp

* Update QJsonFactory.h
2016-07-20 17:16:06 +02:00
redPanther
b1d9a041d4 various fixes (#129)
* various fixes:
- add folder for firmware known as working with hyperion
- rs232: add debug message for close and do not repeat "port not found" message more than neccessary
- v4l2: fix grabber started on creation when set to disabled
- cmake: add new platform x86-dev - this as most code coverage and is usefull for test/development. This is not for release

* add hints for effect-args
2016-07-20 16:04:56 +02:00
brindosch
c1e4a0a6fd Fix KodivideoChecker menu detection 2016-07-17 17:28:34 +02:00
Paulchen-Panther
295e6b6212 Update KODIVideoChecker.cpp (#123)
* Update KODIVideoChecker.cpp

Replace RegExp with QT JSON

* Travis check fix. Thanks redPanther
2016-07-17 14:26:10 +02:00
redpanther
4538e81b4b fix aml build 2016-07-16 23:01:18 +02:00
redpanther
acd15fa108 fix compile for aml 2016-07-16 22:58:13 +02:00
redpanther
d1a5e5b75a Merge remote-tracking branch 'upstream/master' into grabber_rework 2016-07-16 22:52:18 +02:00
redpanther
a8da7acd14 make proto uses priorityRegister 2016-07-16 22:51:31 +02:00
Paulchen-Panther
02c90e8684 Update EffectDefinition.schema.json 2016-07-16 20:34:47 +02:00
Paulchen-Panther
c677a42a74 Update hyperion.schema.json 2016-07-16 20:33:09 +02:00
redpanther
505b83f028 every input sources trackes now its priority and ID to hyperion core
ATM all input sources except inputs via proto are tracked
2016-07-15 23:08:55 +02:00
redpanther
d3e77eb018 fix doxy 2016-07-15 10:28:12 +02:00
redPanther
b49ada956b hyperion won't fail, if v4l2 has invalid device + auto device (#118)
* hyperion won't fail, if v4l2 has invalid device

* add v4l auto select. use "auto" as device name
2016-07-14 23:40:10 +02:00
redPanther
946f9fc603 compile fix (#114)
* multi fix commit

- refactoring leddevicefactory
- adalight: default for "delayAfterConnect" is 1s now - needed for most arduino's because of there special behaviour on open
- fadecandy: new option for disabling configuration send - if you want to keep your fadecandy defaults
- Hyperion.cpp: simplify createSmoothing discussed in #105
- smoothing:
-- add option for continuous output
-- when updatedelay>0 and continousOutput is disabled, buffer is flushed correctly after no input is detected

* add doxygen to travis

* fix code

* fix compile fir ws281x pwm

* remove git merge stuff

* fix compile
2016-07-13 16:19:19 +02:00
redPanther
5a2ef6c4a3 multi fix commit (#112)
* multi fix commit

- refactoring leddevicefactory
- adalight: default for "delayAfterConnect" is 1s now - needed for most arduino's because of there special behaviour on open
- fadecandy: new option for disabling configuration send - if you want to keep your fadecandy defaults
- Hyperion.cpp: simplify createSmoothing discussed in #105
- smoothing:
-- add option for continuous output
-- when updatedelay>0 and continousOutput is disabled, buffer is flushed correctly after no input is detected

* add doxygen to travis
2016-07-13 11:18:12 +02:00
brindosch
1cf7fd545e Bugfix sync with hyperion repo (#110)
* #702  if led color not black

* colorless backlight #707
2016-07-12 23:33:30 +02:00
redPanther
48d20529d3 extend Fadecandy driver (#109)
* add functions to send sysEx (not working correctly atm)

* make new values avail via config
2016-07-12 22:37:45 +02:00
penfold42
7b9b9bcdef logging migration of blackborder and grabber (#108)
* logging migration of blackborder and grabber

* change to "Debug" for noise blackborder log messages
2016-07-12 15:13:06 +02:00
penfold42
49f16ac2e6 HTTP server logging migration (and other random small cleanups) (#106) 2016-07-12 13:47:30 +02:00
penfold42
b7b17b36e8 Migrate logging and add "enable" to smoothing (#105)
* Migrate logging and add "enable" to smoothing

* Migrated the linearcolorsmoothing file
2016-07-12 12:46:54 +02:00
brindosch
76acff8043 Logging for dispmanx, framebuffer, x11, v4l2, osx (#103)
* dispmanx

* typi

* Framebuffer

* fix attempt

* x11

* osx

* V4L2
2016-07-12 00:53:48 +02:00
brindosch
c802505553 logging rework json/proto (#102)
* cleanup: remove ambiled device

as written at the forum this is no longer supported. All people should move to adalight. They just need to flash a new sketch.

* fix typo

* travis.ci

* travis: move to ubuntu 14.04

* script try

* add serialport

* update .json files

* .

* .

* .

* update travis

* fix

* typo

* fix

* .

* disable v4l2 on mac

* disable email notification

* update osx

* maybe fix

* .

* disable osx and rm v4l2

* try osx

* try fix

* travis update

* add oe systemd file

* Proto

* Json

* fix

* fix2

* fix3

* .

* typo

* update

* revert runtime error
2016-07-11 17:08:22 +02:00
penfold42
80fc153d35 udplistener will now set remaining LEDs to black. (#99)
eg: configure 42 leds, but a udp packet only contains 10 leds, the remaining 32 are now set to black
2016-07-11 13:15:08 +02:00
redPanther
2013304130 implement auto avaluation of used platform. To use it simply not add -DPLATFORM (#98) 2016-07-11 11:02:18 +02:00
redPanther
c2e2c26ab2 Logging migration continues ... (#97)
* migrate logging for blackborder and bonjour. fix logging bug in hyperion

* fix kodichecker when kodi is not there
2016-07-10 23:14:23 +02:00
redPanther
3ac0781c1f Kodi checker rework (+enable option) (#96)
* big kodichecker rework

- use new logger
- 'enable' flag in config
- startable on runtime (atm not stoppable and no reconfigure)
- rename xbmc to kodi

* remove unnecceasry checks for kodi

* make kodichecker stoppable and add reconfigure

* tune config
2016-07-10 22:04:31 +02:00
penfold42
d4635bba4e Sk6812rgbwfix (#95)
* sk6812rgbw bug fix and rename device to sk6812rgbw-spi

* Added white_algorithm support to sk6812rgbw-spi device type
2016-07-10 17:07:19 +02:00
penfold42
ca795d883e Add "enable" to forwarder, fix udp listener (#91)
* Add "enable" to forwarder

fix udp listener - address and port parsing was broken

* updated example configs

* updated example config with comments
2016-07-10 12:42:21 +02:00
redPanther
78eaaa2e84 Filter rework, next step (#82)
* common ledbuffer for color transform

hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer

other fixes:
fix compile bug in profiler
update doxygen config

* migrate logging for color transform classes

* prepare new logger in hyperion class

* implement hwledcount

* Update Hyperion.cpp

Fix off color

* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature

* remove colorcorrection completly
fix compile

* set colororder back to static

* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons

* refactoring of RgbChannelAdjustment

* - remove rgbchannelcorrection, this was a dup of rgbchanneladjustment
- add cmake policy to hide warning
- tune code of rgbchanneltransform
2016-07-04 00:43:41 +02:00
redPanther
921f164b26 refactoring of RgbChannelAdjustment (#79)
* common ledbuffer for color transform

hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer

other fixes:
fix compile bug in profiler
update doxygen config

* migrate logging for color transform classes

* prepare new logger in hyperion class

* implement hwledcount

* Update Hyperion.cpp

Fix off color

* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature

* remove colorcorrection completly
fix compile

* set colororder back to static

* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons

* refactoring of RgbChannelAdjustment
2016-07-02 14:00:48 +02:00
redPanther
36b4d072c5 common ledbuffer for color transform (#77)
* common ledbuffer for color transform

hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer

other fixes:
fix compile bug in profiler
update doxygen config

* migrate logging for color transform classes

* prepare new logger in hyperion class

* implement hwledcount

* Update Hyperion.cpp

Fix off color

* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature

* remove colorcorrection completly
fix compile

* set colororder back to static

* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
2016-07-01 23:20:41 +02:00
penfold42
faf5110558 More logging migration. (#74)
Cleaned up old commented out printf statements.

The piblaster stuff probably needs to be moved out of the devicefactory but Ill have to do that later
2016-06-29 16:49:05 +02:00
XfableX
6327a38582 Added logging to X11Grabber (#71)
* Added logging to X11Grabber

* Added logging to Amlogic grabber.

* Fixed mistake in amlogicgrabber.h

* fixed compile issue

* Trigger

* cleaned up log messages
2016-06-29 16:48:53 +02:00
XfableX
1faead11c5 added logging for files that were lacking it. (#66) 2016-06-28 21:53:34 +02:00
redPanther
03ac5689cf make log level settings avail in config file (#63) 2016-06-27 23:56:21 +02:00
redPanther
809ab82524 migrate boblight to new logger and make it start/stoppable during runtime (#62) 2016-06-27 22:43:43 +02:00
penfold42
96037da1cf Added support for sk6812RGBW leds (ab)using the SPI interface. (#61)
right now it only uses RGB - white is set to zero
2016-06-27 22:43:35 +02:00
penfold42
2fff9ae4fc Remove unused constructors (#60) 2016-06-27 22:43:28 +02:00
redPanther
b9634e57d6 Udplistener start/stop during runtime (#56)
* start implementening runtime start/stop for udplistener

* add signal slots for start/stop/statusChanged for better connectivity with other qt stuff

* fix typo
2016-06-27 09:27:11 +02:00
penfold42
de39ff8997 UDPListener improvements: (#53)
- if you listen to a multicast address, it now also listens to all ipv4 addresses
- shared udp sockets - multiple hyperiond instance can optionally share the same udp packets
2016-06-26 20:08:03 +02:00
redPanther
e486b10aa6 Logging leds (#52)
* switch to new logger for folowing led devices:
LedDeviceAtmo
LedDeviceFactory
LedDeviceFadeCandy
LedDeviceHyperionUsbasp
LedDeviceLightpack-hidapi
LedDevicePiBlaster
LedDeviceWS281x
LedRs232Device

leddevice base class defines logger already as protected member _log

* migrate to new logger for led devices.
still todo:
LedDeviceWS2812b
LedDeviceWs2812SPI
LedDeviceTinkerforge
LedDeviceLightpack
LedDeviceMultiLightpack

* migrate leddevice tinkerforge to new logger

* migrate Lightpack and MultiLightpack to new logger
2016-06-26 11:53:16 +02:00
redPanther
4033de85ec Logging leds (#50)
* switch to new logger for folowing led devices:
LedDeviceAtmo
LedDeviceFactory
LedDeviceFadeCandy
LedDeviceHyperionUsbasp
LedDeviceLightpack-hidapi
LedDevicePiBlaster
LedDeviceWS281x
LedRs232Device

leddevice base class defines logger already as protected member _log

* migrate to new logger for led devices.
still todo:
LedDeviceWS2812b
LedDeviceWs2812SPI
LedDeviceTinkerforge
LedDeviceLightpack
LedDeviceMultiLightpack
2016-06-25 22:08:17 +02:00
penfold42
0b59614ab3 native UDP listener enhancements (#48)
- uses new logger
- can specifiy which ip address to listen on
- if its a multicast address, multicast is enabled
2016-06-25 15:15:23 +02:00
penfold42
33f1ef457b More logging cleanup on led devices (#47) 2016-06-25 14:44:52 +02:00
redPanther
56ae551cbd extend hyperion version number (#46)
* add version number for hyperion and json level

* add new jsonrpc_version in HyperionConfig.h.in
add new hard coded version number for hyperion
2016-06-24 23:22:31 +02:00
penfold42
a6e1b89724 cleanup for compiler warning "Note: No relevant classes found. No output generated." (#42)
* Fixed compile error when no grabbers are defined

* Remove stupid avahi warning...

* Started on the new integrated UDP listener to replace the python effect.

Cloned boblight server and rename it to be UDP listener
It compiles!, It starts! it seems to work as a second boblight protocol server...

* moving from the exsting TCP to UDP.
i can catch packets now.. need to consider ditching the connection handling

* It kinda works right now.
UDP packets are received, led data is sent and hyperion displays them.
.... for a moment before going back to what it was doing

* It works!

looks like the default priority of 900 was fighting with something else that was also 900

commented out some udp packet debugging

* oops, forgot to add the changes the the previous commit

* resolving merge conflicts

* Fixed random http port due to uninitialized _port

* cleaning up compiler warning

* cleaned up CMakeLists to remove warning:
Note: No relevant classes found. No output generated.
2016-06-24 17:46:30 +02:00
penfold42
b6a0b7261d logging migration for ws281x and LedUdpDevice (#45) 2016-06-24 17:46:23 +02:00
redPanther
33ebdcaffc - add cmake qt check, minimum 5.2 (#40)
- on x86 use dynamic avahi libs
- fix compile error
2016-06-23 19:56:50 +02:00
redPanther
d4142b4eb4 migrate logging for effects and verbose options (#38)
* start step by step  migration to new logger

* fix linking for serialport

* migrate effectengine to new logger

* tune log messages

* add commandline options for hyperiond to control verbosity
--silent
--verbose
--debug
2016-06-23 13:48:49 +02:00
redPanther
34252b434d fix linking for serialport (#37) 2016-06-23 09:39:56 +02:00
redPanther
93e3981df1 Serialport (#36)
* migrate serialport to qt5 serialport

* remove old serialport
add logging to serialport

* remove try catch - qt serialport uses plain return values

* tiny fix, but not working atm

* make it work, tested with adalight
2016-06-23 00:11:09 +02:00
penfold42
48134d0aef Remove widgets (#35)
* Trying to remove dependency on Widget
removed unused bonjour example source

* forgot the modified files
2016-06-21 23:34:57 +02:00
redPanther
f48af9daff extend logger (#34) 2016-06-21 21:41:26 +02:00
redPanther
eccd4e6637 rework bootsequence (#30)
* udplistener/boblight: use hyperion::getInstance
hyperiond: fix dispmanx is started twice
hyperiond: rework bootsequence - now named as InitalEffect

* pull out webconfig from hyperiondaemon to functional when daemon crashes
initialEffect: forbid foreground effect duration infinitiy
2016-06-20 23:41:07 +02:00
penfold42
1cb6ee0a43 Fixed random http port due to uninitialized _port (#29) 2016-06-20 15:51:34 +02:00
penfold42
a23735d1ef New builtin udp listener (#18)
* Fixed compile error when no grabbers are defined

* Remove stupid avahi warning...

* Started on the new integrated UDP listener to replace the python effect.

Cloned boblight server and rename it to be UDP listener
It compiles!, It starts! it seems to work as a second boblight protocol server...

* moving from the exsting TCP to UDP.
i can catch packets now.. need to consider ditching the connection handling

* It kinda works right now.
UDP packets are received, led data is sent and hyperion displays them.
.... for a moment before going back to what it was doing

* It works!

looks like the default priority of 900 was fighting with something else that was also 900

commented out some udp packet debugging

* oops, forgot to add the changes the the previous commit

* resolving merge conflicts
2016-06-20 08:38:12 +02:00
brindosch
065e65b8e0 cleanup: remove ambiled and fix typo (#13)
* cleanup: remove ambiled device

as written at the forum this is no longer supported. All people should move to adalight. They just need to flash a new sketch.

* fix typo
2016-06-19 17:18:11 +02:00
redPanther
4533b34606 Hyperiond refactoring + preparation for ip restriction settings (#12)
* make hyperion to singelton.
remove arguments for config and hyperion - both are gettable via Hyperion::getInstance

* refactor hyperiond

* remove qt4 comapt
make zeroconf mandatory
refactor hyperiond

* xbmcchecker is now a singleton

* cleanup in hyperiond
zeroconf switchable between static and shared linking

* fix xbmcchecker

* extensive refactoring of hyperiond
webserver: make client ip information availabel in request object - preparation for ip filters
proto/json server, use hyperion::getInstance instead of hyperion argument

* move creation of hyperion core into hyperionDeamon class
cleanup
2016-06-19 00:56:47 +02:00
penfold42
0e5607db65 Fixed compile error when no grabbers are defined + remove avahi warning (#11)
* Fixed compile error when no grabbers are defined

* Remove stupid avahi warning...
2016-06-18 16:33:25 +02:00
redPanther
88fbc4dfde refactoring and cleanup (#2)
* make hyperion to singelton.
remove arguments for config and hyperion - both are gettable via Hyperion::getInstance

* refactor hyperiond

* remove qt4 comapt
make zeroconf mandatory
refactor hyperiond

* xbmcchecker is now a singleton

* cleanup in hyperiond
zeroconf switchable between static and shared linking

* fix xbmcchecker
2016-06-17 01:25:40 +02:00
redPanther
4a841710dd webui - "cgi" handler and multiple fixes (#700)
* initial commit of webconfig

* update example config with webconfig and fix format of file
update debian postinst script for install example config

* fix compiling
add new web server command "serverinfo" to use in webapp to retrieve json port

* change web default port to 8099

* add cgi engine to webserver

* fix include
2016-06-14 20:14:06 +02:00
redPanther
eb64e7e528 webui fix and serverinfo (#699)
* initial commit of webconfig

* update example config with webconfig and fix format of file
update debian postinst script for install example config

* fix compiling
add new web server command "serverinfo" to use in webapp to retrieve json port

* change web default port to 8099
2016-06-13 22:54:08 +02:00
redPanther
9f564f8d89 fix build on osx (#695) 2016-06-12 22:27:34 +02:00
redPanther
7dfb9f1967 integrated webserver ... (#697)
* initial commit of webconfig

* update example config with webconfig and fix format of file
update debian postinst script for install example config
2016-06-12 22:27:24 +02:00
brindosch
8746e0795c -
Former-commit-id: 7aa71ba95e2bb9d76daf612a79fc3f1dd745cf0e
2016-06-10 23:54:53 +02:00
brindosch
4743208eff silent kodi check
Former-commit-id: 45199d123fcf49194aeaaf2df0789dc7ea4df449
2016-06-10 19:52:03 +02:00
brindosch
b3fa72adba fix
Former-commit-id: 2019d94e3bb06e23890759aecfd646facbcc0f37
2016-06-10 18:55:42 +02:00
brindosch
ae40edc578 Add version string to json output (#690)
* hyperionversionid

* typo

* -


Former-commit-id: ec5777ccb32fc343ef2f478a7c779a901c8aa489
2016-06-10 18:32:50 +02:00
Paulchen-Panther
f0dec4cf73 Hyperion X11 KodiCheck (#685)
* Update X11Grabber.h

* Update ProtoConnection.h

* Update ProtoConnectionWrapper.h

* Update ProtoServer.h

* Update X11Grabber.cpp

* Update message.proto

* Update ProtoClientConnection.cpp

* Update ProtoClientConnection.h

* Update ProtoConnection.cpp

* Update ProtoConnectionWrapper.cpp

* Update ProtoServer.cpp

* Update hyperion-x11.cpp

* Update X11Wrapper.cpp

* Update X11Wrapper.h

* Update hyperiond.cpp

* Update ProtoClientConnection.cpp

* Update X11Wrapper.cpp

* Update hyperiond.cpp


Former-commit-id: a572f275b270217cd8ce8cdd91b3eca3037d6472
2016-06-07 23:12:18 +02:00
redPanther
614131ebe6 compile fix, cleanup (#684)
* implement make install
set CMAKE_INSTALL_PREFIX e.g. to /opt to install to /opt/hyperion
set ENABLE_SYSTEM_INSTALL to ON to activate installation
after compiling use
make install
or
make install/strip
(for performance/size optimized binaries - compile in Release to get best performance)

* cleanup cmake files
use
cmake -DINSTALL_PREFIX=/opt/hyperion ..
to install all files to hyperion or
cmake -DINSTALL_PREFIX=/usr/
to install to usr. install folders are linux standard. bin go to bin folder and additionals (effects) go to share/hyperion

* add uninstall target - be patient with that, this will remove files from your system
install service files to share/hyperion - if you want to use them you have to make a symlink to your location of service files

* optimize build release script
install service files into hyperion share folder (services not activated, this must be done by distribution package script)
initial support of cmake option -DPLATFORM= option. This selects platform specific cmake flags. no need for -DENABLE_... options (unless you want some special things)
automatic detect for apple build

* update submodule

* fix cmake error when no platform is given

* initial support for deb,rpm and tgz packages - no usefull content atm!

* make packeages contain usefull stuff

* add license
make packes more functional. package specific install missing yet

* implement debian postinstall

* disable rpm generation until it has a working state

* add hypercon compat

* add posibility for multiple config files. first one found is taken

* remove hyperion comaptlayer
services is not started automaticly

* rework debian postinstall:
- remove /opt compatibility complety. This makes more trouble as it is usefull
- when hyperiond already started, restart it
- cleanup

* add deb package dependencies

* wipe out last support for /opt installation

* change default effect path in config to /usr

* revert service files and config files

* remove last occurences of ENABLE_PROTOBUF
fix cmake warnings and make it ready for cmake 3
fix refactoring of hyperiond.cpp creates no objects for network services

* all arguments via reference ...

* fix xbmcchecker not working

* add logger class

* - profiler must be activated with ENABLE_PROFILER, otherwise an error will raise
-> this should prevent profiler gets into release code

* fix profiler

* make logger compat with older/partial c++11 versions (r.g. debian wheezy)
fix description of optionparser
fix atmoorb not compile for qt4. now it should compile for qt5 and 4

* make logger compiles with qt5 too
fix compiler warnings

* remove debug code


Former-commit-id: 6aa41351667caed712b1f28010dbedfca8a6a5a0
2016-06-07 22:24:29 +02:00
brindosch
ad65ca2983 atmoorb qt5 fix (#683)
Former-commit-id: 64ce9cd676059d5225493a97c89b83f589f68417
2016-06-07 13:17:40 +02:00
brindosch
9578a3e386 Kodicheck: Add option for pause modus (#681)
* introduce pause mode

* fix it fe...

* fix

* fix compile warning

* change solution

* fix order

* fix

* last update

* -


Former-commit-id: b35c4d672aed5be7a6a694b3c861c6cf287d89df
2016-06-07 12:34:50 +02:00
redPanther
f39f074dcf add logger/compiler class (#680)
* implement make install
set CMAKE_INSTALL_PREFIX e.g. to /opt to install to /opt/hyperion
set ENABLE_SYSTEM_INSTALL to ON to activate installation
after compiling use
make install
or
make install/strip
(for performance/size optimized binaries - compile in Release to get best performance)

* cleanup cmake files
use
cmake -DINSTALL_PREFIX=/opt/hyperion ..
to install all files to hyperion or
cmake -DINSTALL_PREFIX=/usr/
to install to usr. install folders are linux standard. bin go to bin folder and additionals (effects) go to share/hyperion

* add uninstall target - be patient with that, this will remove files from your system
install service files to share/hyperion - if you want to use them you have to make a symlink to your location of service files

* optimize build release script
install service files into hyperion share folder (services not activated, this must be done by distribution package script)
initial support of cmake option -DPLATFORM= option. This selects platform specific cmake flags. no need for -DENABLE_... options (unless you want some special things)
automatic detect for apple build

* update submodule

* fix cmake error when no platform is given

* initial support for deb,rpm and tgz packages - no usefull content atm!

* make packeages contain usefull stuff

* add license
make packes more functional. package specific install missing yet

* implement debian postinstall

* disable rpm generation until it has a working state

* add hypercon compat

* add posibility for multiple config files. first one found is taken

* remove hyperion comaptlayer
services is not started automaticly

* rework debian postinstall:
- remove /opt compatibility complety. This makes more trouble as it is usefull
- when hyperiond already started, restart it
- cleanup

* add deb package dependencies

* wipe out last support for /opt installation

* change default effect path in config to /usr

* revert service files and config files

* remove last occurences of ENABLE_PROTOBUF
fix cmake warnings and make it ready for cmake 3
fix refactoring of hyperiond.cpp creates no objects for network services

* all arguments via reference ...

* fix xbmcchecker not working

* add logger class

* - profiler must be activated with ENABLE_PROFILER, otherwise an error will raise
-> this should prevent profiler gets into release code

* fix profiler


Former-commit-id: b716dd40dbf5b837356eec876d85ec71c86d5c6c
2016-06-05 16:08:55 +02:00
redPanther
f2e9193987 fix #674 (#676)
* implement make install
set CMAKE_INSTALL_PREFIX e.g. to /opt to install to /opt/hyperion
set ENABLE_SYSTEM_INSTALL to ON to activate installation
after compiling use
make install
or
make install/strip
(for performance/size optimized binaries - compile in Release to get best performance)

* cleanup cmake files
use
cmake -DINSTALL_PREFIX=/opt/hyperion ..
to install all files to hyperion or
cmake -DINSTALL_PREFIX=/usr/
to install to usr. install folders are linux standard. bin go to bin folder and additionals (effects) go to share/hyperion

* add uninstall target - be patient with that, this will remove files from your system
install service files to share/hyperion - if you want to use them you have to make a symlink to your location of service files

* optimize build release script
install service files into hyperion share folder (services not activated, this must be done by distribution package script)
initial support of cmake option -DPLATFORM= option. This selects platform specific cmake flags. no need for -DENABLE_... options (unless you want some special things)
automatic detect for apple build

* update submodule

* fix cmake error when no platform is given

* initial support for deb,rpm and tgz packages - no usefull content atm!

* make packeages contain usefull stuff

* add license
make packes more functional. package specific install missing yet

* implement debian postinstall

* disable rpm generation until it has a working state

* add hypercon compat

* add posibility for multiple config files. first one found is taken

* remove hyperion comaptlayer
services is not started automaticly

* rework debian postinstall:
- remove /opt compatibility complety. This makes more trouble as it is usefull
- when hyperiond already started, restart it
- cleanup

* add deb package dependencies

* wipe out last support for /opt installation

* change default effect path in config to /usr

* revert service files and config files

* remove last occurences of ENABLE_PROTOBUF
fix cmake warnings and make it ready for cmake 3
fix refactoring of hyperiond.cpp creates no objects for network services


Former-commit-id: 56e3e0d1014999b2555418c7b5a2898ac29fb5f1
2016-06-04 19:26:34 +02:00
penfold42
e8207cfe31 fix more "dos" line endings (#673)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* cleaned up a couple of compiler warnings

* moved bitpair_to_byte initialiser to (hopefully) work with older GCC

* compiler warning in udp driver
removed some tabs in ws2812b.cpp

* formatting - spaces to tabs

* moved rpi_281x to tag sk6812-v1.0

* moving to my fork of rpi_281x

* removed dos line endings

* Found some more "dos" line ending files


Former-commit-id: c756e3ccc153fd36e23a26eff37a1230bdd4b9b4
2016-06-03 16:46:45 +02:00
penfold42
d5ce395e8e Add sk6812rgbw support (#666)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* adding support for SK6812 - not working yet

* Changed rpi_ws281x submodule to be penfold42's fork

* Set White to zero for now

* starting on the code to make the White led do stuff

* Added some basic whie led calculation
white = min(r,g,b)
r-=w, g-=w, b-=w

* cleaned up a couple of compiler warnings

* updated strip type to use corrected RGBW strip type
(the SK6812RGBW datasheet is wrong)

* moved bitpair_to_byte initialiser to (hopefully) work with older GCC

* compiler warning in udp driver
removed some tabs in ws2812b.cpp

* formatting - spaces to tabs

* moved rpi_281x to tag sk6812-v1.0

* attempt #3 at migrating the rpi_281x submodule to my fork/branch

* moving to my fork of rpi_281x

* Started implementing multiple RGB to RGBW conversion options

a quick hack has been implemented inside WS281x.cpp but ive started
moving this to RgbToRgbw.cpp for reuse by other led device types

* migrated RGB to RGBW conversion to RgbToRgbw.cpp


Former-commit-id: ff8e9038c4bb8203b71b42d12bf23be4abcc0b3b
2016-05-31 22:55:56 +02:00
penfold42
6fbfda03fa add zeroconf support based on qt4 libraries (#667)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* added bonjour/zeroconf service discovery to the json interface.

When clients are also modified, they can
- find hyperiond on the network much more quickly than ping/portscan;
- find multiple instances running on different ports instead of assuming 19444

* Moved zeroconf calls to hyperiond.cpp

* Added mDNS/zerconf/bonjour registration for proto server

Added config options.
        "jsonServer" :
        {
                "port" : 49444,
//              "mDNSDescr" : "hyperiond jsonServer blah de blah",
                "mDNSService" : "_hyperiond_json._tcp"
        },

* cleaned up a couple of compiler warnings

* moved bitpair_to_byte initialiser to (hopefully) work with older GCC

* compiler warning in udp driver
removed some tabs in ws2812b.cpp

* formatting - spaces to tabs

* moved rpi_281x to tag sk6812-v1.0

* moving to my fork of rpi_281x

* Now uses the led device name and hostname to create the annouce name


Former-commit-id: abfa51bcf359cafa63338181c1b83ecfd231bc87
2016-05-31 22:55:11 +02:00
ntim
03cee33784 Fix for Philips Hue flickering when switchOffOnBlack is set true (#668)
* Improved switch off on black feature.

* Changed "isnan" to "std::isnan"


Former-commit-id: 5db2b97674661e4e19f796a91dd443a501268e27
2016-05-31 22:54:47 +02:00
penfold42
6f43fe1196 New QT based udp driver (#662)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* cleaned up a couple of compiler warnings

* moved bitpair_to_byte initialiser to (hopefully) work with older GCC

* compiler warning in udp driver
removed some tabs in ws2812b.cpp

* formatting - spaces to tabs

* moved rpi_281x to tag sk6812-v1.0

* moving to my fork of rpi_281x

* half way thru re merging the newudp support

* Whoops.... dont know how it compiled before..

* Removed debugging that was commented out


Former-commit-id: ac4330422f93f3d594dfcba5593759288298d25e
2016-05-30 23:58:31 +02:00
Paulchen-Panther
23042ba07c Update Json Interface (Active LED Color) (#664)
* add getCurrentPriority

* add getCurrentPriority

* Update active led color


Former-commit-id: 0e6b828991fdf51d2ec859d3836ce4f976dfd88c
2016-05-30 22:39:12 +02:00
tpmodding
019d4ba6d8 Update LedDevicePhilipsHue.cpp
Changed "isnan" to "std::isnan"

Former-commit-id: 528f02452762fade16b84d17dc7692de9129559c
2016-05-27 11:16:42 +02:00
redPanther
945f3d1c5b big code cleanup. mostly line endings and indentions (#659)
No functional changes - except protobuffer is mandatory and not optional now.

Former-commit-id: 1e6347e708707cc388cdedb8d0352a9f017030b8
2016-05-26 23:44:27 +02:00
brindosch
13b08d5df1 Merge branch 'Beta' of https://github.com/hyperion-project/hyperion into Beta
Former-commit-id: 7e6f328f5cd1912374fb25a5676e07b9e44630be
2016-05-26 07:46:01 +02:00
brindosch
716935dfff xbmc checker fix (3)
Former-commit-id: c8b406033d333177dd2470522b2d8526a9c02d07
2016-05-26 07:45:54 +02:00
redPanther
a41051cc84 prevent colorsmoothing from flooding led device with data when no new input data is available (#654)
resolve compiler warnings

Former-commit-id: c7fbdce5dc7fde8b8e188320408dc547b9ad5e51
2016-05-26 07:01:10 +02:00
brindosch
84d9f4ef80 xbmc checker fix (2)
Former-commit-id: 735f8e3e356b0fca0562185f30532860c7879ee3
2016-05-25 21:15:49 +02:00
brindosch
1e319be54a hotfix x11grabber
Former-commit-id: 7068bad863cf229e01382f859ff06a51dad82d17
2016-05-25 18:53:09 +02:00
Funatiq
45dff6d1d3 Reduce saturation in backlight (#651)
Former-commit-id: c2c4fd6f957c3623e03c37393cf3c03a7a27dc1e
2016-05-24 22:15:39 +02:00
redPanther
06afe06774 better output for effect path loading (#652)
* better output for effect path loading

* effectengine: error when no efx available


Former-commit-id: 7724e56850ef9f9a703fb41e82baf88e5534f492
2016-05-24 22:14:45 +02:00
Paulchen-Panther
409ef383f3 XRender support for X11 Grabber (#649)
* Update X11Grabber.h

* Update X11Grabber.cpp

* Update CMakeLists.txt

* Update hyperion-x11.cpp

* Update X11Wrapper.cpp

* Update X11Wrapper.h


Former-commit-id: d2f7cb0e22248a0c2963bf53728f2e0d7bb9dee1
2016-05-24 19:55:50 +02:00
Funatiq
f8b724f9f9 Minimum luminance for backlight in dark scenes (#646)
* Include miminum luminance

* Add luminance minimum

* Add luminance minimum

* fixed missing ;

* Add luminance minimum

* Add luminance minimum check

Check if luminance mimimum is other than default

* Add luminance minimum

* Add luminance minimum

* Add luminance minimum

* Add luminance minimum

* Add luminance minimum

* Safe luminance calculation


Former-commit-id: 35a762b18b473a333155acba7a00894204400076
2016-05-23 00:00:48 +02:00
penfold42
c179b86b8d fix LedDeviceWs2812SPI to compile on gcc 4.6 (#643)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* cleaned up a couple of compiler warnings

* moved bitpair_to_byte initialiser to (hopefully) work with older GCC

* compiler warning in udp driver
removed some tabs in ws2812b.cpp

* formatting - spaces to tabs


Former-commit-id: 42cc7325177c9fcc3d1bd29cbfe72f02118d3233
2016-05-22 12:56:44 +02:00
Funatiq
82f3fbdb20 Reorder Transform and Adjustment (#636)
Change order from "Adjustment -> Transform" to "Transform -> Adjustment"

Former-commit-id: 5b63d0bce98a80b5a2604e43772574ec6bbfd2a5
2016-05-22 00:30:53 +02:00
Funatiq
4afd730954 Better color adjustment (#637)
Only apply color channel if color is dominant. Grey color independent from color channels. Linear increase of color channel from grey to maximum.

Former-commit-id: cda9fca0084174877c45a7e9a867e6209ffe9e44
2016-05-22 00:30:28 +02:00
Matthias Reichl
f584b05de5 dispmanx: fix grabber issues with certain widths and support cropping (#634)
* dispmanx: fix grabber issues with certain widths and support cropping

The dispmanx grabber will produce garbage output if the destination
pitch is not set to a multiple of 64 bytes (16 RGBA pixels).

It can also fail when retrieving only a part of the image
(eg in 3DSBS or TAB mode).

Handle these cases by capturing the full image into a separate
buffer with the pitch set to an appropriate value and manually
handle 3D SBS/TAB left/top half copying.

At this point supporting cropping like in the V4L2 grabber is
rather easy and added as well. This'll help handling overscan
setups (old TVs) and removing (possibly asymmetric) overscan
borders.

Cropping is disabled in video capture mode (when the
DISPMANX_SNAPSHOT_FILL flag is set).

Signed-off-by: Matthias Reichl <hias@horus.com>

* hyperion-dispmanx: add optional crop values and 3D mode options

Signed-off-by: Matthias Reichl <hias@horus.com>

* hyperiond: support cropping on the dispmanx grabber

Honor cropLeft, cropRight, cropTop and cropBottom settings in
the framegrabber section of the conf file to control cropping.

Signed-off-by: Matthias Reichl <hias@horus.com>

Former-commit-id: bbb55f6621b90384e417f37da4f2543d112ef57a
2016-05-18 11:26:25 +02:00
Rick164
4ccda40250 Kodi video checker bugifx (#633)
* Kodi video checker patch to make it compliant with recent JSON RPC API specs.

* Updated inline documentation for Kodi video checker.


Former-commit-id: e0760f55e1ddd61f10ae457c485aa01ae4507260
2016-05-17 02:54:10 +02:00
recliq
8310a6d9d0 added simple TPM2.net support to UDP output (#627)
Former-commit-id: 59356ae53c90e178a4bc198c6babc5832bb15d12
2016-05-15 18:39:26 +02:00
penfold42
a960894d14 Another option for Ws2812 - direct spi from the pi with 1 wire (#631)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* This add a new device type - ws2812spi.

I've (ab)used the SPI interface to send the correct timing pulses to keep the ws2812 happy.
THE RATE IS IMPORTANT!
A FIXED CORE_CLK IS IMPORTANT!

Attach the SPI MOSI pin on the Pi to the DIN pin on your ws2812

        "device" :
        {
                "name"       : "MyPi",
                "type"       : "ws2812spi",
                "colorOrder" : "grb",
                "output"     : "/dev/spidev0.0",
                "rate"       : 3800000
        },

* updated hyperiond.test-binary

* Updated default SPI speed to the "correct" value.
My Pi was undervolted so was dropping the core clock confusing everything

* Code cleanups
explicitly set the final 3 bytes to 0

* Removed latchtime option - not applicable

* updated test binary


Former-commit-id: d3c19c8374999f7a554bb25ca181a8a483f86289
2016-05-15 18:39:17 +02:00
penfold42
c17e4894d9 Apa102 fix if the led strip has more physical LEDs than you want to configure with hyperion (#626)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* started bug fixes for APA strips with more physical leds than configured

* 1st cut of changes to APA102.

now looks at config for "leds" which is the # of hardware leds in the strip.
This enables us to write the correct trailer length in the packet.

Also fixed a bug where switchoff was writing the wrong # of leds

* removed commented out old code

removed debug printf

* included prebuild test binary for Pi2

* Second attempt at the fix.
BEFORE:
If you have more physcial LEDs than defined in the "leds" "index" section of the config there is random junk added to the end of the strip.

WITH THIS FIX:
In the "device" section specify the number of physical leds with:
 "leds" : 212,
If this is greater than the number of led indexes, additional LEDs are set to black
If this is smaller than the number of led indexes, it is ignored

* included test binary

* Clean exit if the device config is missing or a non-supported device type is specified

Former-commit-id: 8ae96188fa74d91b13a921e7d5faf6d6ac1c42ee
2016-05-10 12:16:19 +02:00
Paulchen-Panther
536b51dba1 Update JsonClientConnection.cpp
JSON API: Get current LED color

Former-commit-id: 0b40c1eb1627afd8077bdf690109609fd531c2fb
2016-05-06 15:05:28 +02:00
RickDB
3227a3125b AtmoOrb - removed skip same color change.
Former-commit-id: 399ad830d9ecad8bf8d1e62241744f15631f0515
2016-05-05 14:48:33 +02:00
penfold42
deed8066b0 Piblaster fix (#614)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* Experimental changes to piblaster code to work how i think it should

It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led.
                "assignment"       : "rgbrgbrgb",
Would result in:
//Channel number    GPIO number   Led channel
//      0               4             0 red
//      1              17             0 green
//      2              18             0 blue
//      4              27             1 red
//      5              21             1 green
//      6              22             1 blue
//      7              23             2 red
//      8              24             2 green
//      9              25             2 blue

* Ammend pwm channel mapping comments to match the code

* 1st cut of the new more flexible piblaster pin mapping support

it works but is still rough

* removed old "assignment" handling
- prints an error messaage if found and terminates

fixed the switchoff method

* removing iPins hard coded list of valid GPIO pins

* removed iPins array for switchOff function

* code cleanups

input validation

* Handle catching (and ignoring) SIGPIPE.
You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover

* added a binary for testing

* Added sample config and my modified pi-blaster version to support more GPIOs

* moved hyperiond

* removed testing binaries

move sample configuration to the configs directory

* re enabled device config display

* removed sample configuration


Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
Paulchen-Panther
bb9b02cf05 get current state (active Effects) over JSON Interface (#608)
* Create ActiveEffectDefinition.h

* Update EffectEngine.h

* Update Hyperion.h

* Update Effect.h

* Update EffectEngine.cpp

* Update Hyperion.cpp

* Update JsonClientConnection.cpp


Former-commit-id: 5664b69da6893dd0d0de0e7c74c01cdcafd57310
2016-04-24 17:07:31 +02:00
Rick164
d4dda2dcc4 AtmoOrb LedDevice now only processes new color commands and skips identical, saves last send color per light id separately in Qmap. (#602)
Former-commit-id: 38873e5b718c73d95111abcb10cf148f6a6ab18b
2016-04-21 14:51:43 +02:00
Rick164
02fef83bb8 AtmoOrb smoothing additions
* Updated smoothing options for AtmoOrb, can now choose between Orb external or Hyperion's internal smoothing.
With skipSmoothingDif you can set the maximum allowed color difference before overriding / clearing Orb smoothing during faster color change like for instance color <-> black.

* Updated inline documentation.

* Fixed command type typo in AtmoOrb device.

* Corrected variable spelling in AtmoOrb device.

* Make smoothing also match equal values for AtmoOrb smoothing differential


Former-commit-id: 3eede43c2f76fa324f0144aeac0526b8125ad149
2016-04-02 00:07:28 +02:00
AEtHeLsYn
b37cbd26d5 Add color adjustment to all RBG channels
* Channel adjustment config

* Create RgbChannelAdjustment.h

* Delete RgbChannelAdjustment.h

* Create RgbChannelAdjustment.cpp

* Create RgbChannelAdjustment.h

* Delete RgbChannelAdjustment.cpp

* Create ColorAdjustment.cpp

* Delete RgbChannelAdjustment.h

* Create ColorAdjustment.h

* Update ColorAdjustment.h

* Update ColorAdjustment.h

* Update ColorAdjustment.h

* Update ColorAdjustment.cpp

* Update Hyperion.cpp

* Update Hyperion.cpp

* Update Hyperion.cpp

* Update Hyperion.h

* Create RgbChannelAdjustment.cpp

* Create RgbChannelAdjustment.h

* Create ColorAdjustment.h

* Create MultiColorAdjustment.h

* Update MultiColorAdjustment.h

* Create MultiColorAdjustment.cpp

* Delete ColorAdjustment.cpp

* Delete ColorAdjustment.h

* Update RgbChannelAdjustment.cpp

* Update Hyperion.cpp

* Update Hyperion.h

* Update Hyperion.cpp

* Bug fixes

* Update hyperion.config.json

* Add color adjustment to json server and client and adapt hyperion-remote

* Change the color modification order

* Minor bug fix

* Create calibration Images folder

* Create calibration Gamma folder

* Create calibration RGB folder

* Added files via upload

* Delete .gitkeep

* Delete .gitkeep

* Added files via upload

* Delete .gitkeep

* Update color effect order and don't correct twice

* Uploaded gradient images


Former-commit-id: 8ab465e59834f12a21709a6f4546bd6808a2a495
2016-04-02 00:04:11 +02:00
brindosch
ad584aa548 Typos
Former-commit-id: fc7bc3c0e4bddcb5a6b778c2afabc3940a08782c
2016-03-23 18:54:49 +01:00
brindosch
f332473b77 Merge remote-tracking branch 'refs/remotes/origin/Beta'
Former-commit-id: 5bdbda1406bb0ddb99440502584604b85b0f3063
2016-03-23 17:53:32 +01:00
brindosch
fa66c3b2b5 Rework log messages
Former-commit-id: eac93c0fd78fdf353e940d08df3cabf0b962a3e2
2016-03-23 17:40:45 +01:00
penfold42
a3204ae6be LedDeviceFile now defaults to /dev/null if the output is omitted.
Former-commit-id: eff12ec16d08ffa00287ed68238ab6b397f1c53d
2016-03-23 21:28:31 +11:00
penfold42
7dce3ab798 renamed the "Test" device to be "File"
No functional changes, but
- files have been renamed
- the device name is now "file" not "test"


Former-commit-id: 3fbc03c3fe1d764654c1d28ebb80562ce6276ab1
2016-03-23 21:12:34 +11:00
penfold42
6143075365 1. changed default number of pwm LEDs to 256
2. Adds support for level shifters that invert the data
Config option - "invert" (integer)
if omitted, do not invert
if == 0, do not invert
if !=0, invert


Former-commit-id: fd5b2863a85b11ac3a8444d1e02822f852feb556
2016-03-22 23:50:14 +11:00
brindosch
fb7445b545 Update
Former-commit-id: 3c6ac5d2f618cd7499c16bca950ff3d41f855318
2016-03-22 01:01:54 +01:00
brindosch
1f18073f00 Merge pull request #534 from AEtHeLsYn/master
Color correction

Former-commit-id: 7be726f1adb8698684a2b4726650082ed517901f
2016-03-22 00:56:41 +01:00
brindosch
2677304ec4 Merge pull request #553 from ntim/support_for_philips_hue
Improved validity checks and memory footprint for Philips Hue

Former-commit-id: 65b450ae730fd5e06006a8fe6ab3e3b6ce260c43
2016-03-22 00:56:27 +01:00
AEtHeLsYn
3c2682b626 Update JsonClientConnection.cpp
Former-commit-id: 5014c392b3c7629b6f02ead321621f7edc560680
2016-03-21 17:42:13 +01:00
AEtHeLsYn
b46d231f75 Update JsonClientConnection.cpp
Former-commit-id: fef896ef86f04901cf2227a0897dd9ea999325b7
2016-03-21 17:07:02 +01:00
AEtHeLsYn
642de44c7c Update JsonClientConnection.cpp
Former-commit-id: 53b8cf73df6f3cec49886169b870e5490828716b
2016-03-21 17:04:02 +01:00
AEtHeLsYn
ef1f269c51 Update schema-correction.json
Former-commit-id: 223e5d183fd2ec83f61421aaa142bc86958fff6a
2016-03-21 17:00:01 +01:00
AEtHeLsYn
35b7707b3f Update schema-temperature.json
Former-commit-id: 3f5a96e0275e239ba0361905282b59a9bd4412d0
2016-03-21 16:59:46 +01:00
Mark Walker
d2973ff20b Add ws281x driver parameter for PWM channel
The RPi 2 and 3 have two PWM channels and 3 PWM pins available to the
gpio header.  BCM18 and BCM12 run on PWM channel 0.  BCM13 runs on PWM
channel 1.  This change allows BCM13 to be used by allowing the PWM
channel to be specified.


Former-commit-id: 3693ab438c2b369e6307c262d32bba509409e5b9
2016-03-20 22:05:24 -07:00
ntim
e0c3ece80d Deletion of qt network reply objects.
Former-commit-id: 258badb680014a187d76d9183080ea3de6895692
2016-03-20 13:33:41 +01:00
ntim
926f47fc1a Added more precise outputs on failures as well as some additional checks.
Former-commit-id: a0def586410d90abda002504d9c2ae88abc43088
2016-03-19 12:36:55 +01:00
ntim
d75a88eb9f Retreived one light more than necessary.
Former-commit-id: 6ee5b0f4a86210fcf4bf3ee96b369aff20c25720
2016-03-17 09:06:28 +01:00
AEtHeLsYn
75991c16e1 Merge pull request #7 from tvdzwan/master
Up-to-date

Former-commit-id: ca05f264b29838c2444f2687ff1bf510bbf9d9af
2016-03-16 10:40:38 +01:00
RickDB
7adb339dea Updated orbIds config setting and sample config.
Former-commit-id: 350db40b53d04efbb43dc8c87c88bf2eb378fa6b
2016-03-15 18:37:55 +01:00
RickDB
f783c59185 Corrected indenting in LedDeviceFactory.cpp.
Former-commit-id: 31713a4a0ce9bd25fd1e39969bbb481363a80167
2016-03-15 12:06:24 +01:00
RickDB
e5545eaac0 Code reformatted.
Former-commit-id: 6f3688791602efb33389c3ba789e7a8a723ee290
2016-03-15 12:03:00 +01:00
RickDB
dcc6a9b449 Make sure the byte array is empty before filling it.
Former-commit-id: 64f76fa358234e131377ecfabf196f3c7324e79f
2016-03-15 11:45:25 +01:00
RickDB
5be072be24 Added more inline documentation.
Simplified joinedMulticastgroup.
Removed non-required functions and includes.


Former-commit-id: 829b5c6f89ee1e9a4789dbe18f911b05e3b5d8e1
2016-03-15 11:10:04 +01:00
RickDB
fdb164da0a Added multi Orb support, Orb ID should match that of leds index with a +1 offset (index 0 = Orb id 1 etc..)
Code cleanup.


Former-commit-id: af8a6df876f334c9a65b1a936b5bb85b380d86d1
2016-03-14 23:19:20 +01:00