* - add more drawing func to effect engine
- make provider rs232 less noisy
- json checks: remove utf8 conversion temporarly and make it compat with py3 again
* fix compile prob
* Adding support for sk6822 timing
This isnt complete, but should be a good starting point for others to learn from.
1) Here is where the led device source is located:
cd libsrc/leddevice
2) Find the files that need changing:
root@loungepi:libsrc/leddevice# grep -ri 2812spi *
CMakeLists.txt: ${CURRENT_SOURCE_DIR}/LedDeviceWs2812SPI.h
CMakeLists.txt: ${CURRENT_SOURCE_DIR}/LedDeviceWs2812SPI.cpp
LedDeviceFactory.cpp: #include "LedDeviceWs2812SPI.h"
LedDeviceFactory.cpp: REGISTER(Ws2812SPI);
LedDeviceSchemas.qrc: <file alias="schema-ws2812spi">schemas/schema-ws2812spi.json</file>
LedDeviceWs2812SPI.cpp:#include "LedDeviceWs2812SPI.h"
LedDeviceWs2812SPI.cpp:LedDeviceWs2812SPI::LedDeviceWs2812SPI(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp:LedDevice* LedDeviceWs2812SPI::construct(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp: return new LedDeviceWs2812SPI(deviceConfig);
LedDeviceWs2812SPI.cpp:bool LedDeviceWs2812SPI::init(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp:int LedDeviceWs2812SPI::write(const std::vector<ColorRgb> &ledValues)
LedDeviceWs2812SPI.h:class LedDeviceWs2812SPI : public ProviderSpi
LedDeviceWs2812SPI.h: LedDeviceWs2812SPI(const QJsonObject &deviceConfig);
3) Copy the existing files as a starting point:
cp LedDeviceWs2812SPI.cpp LedDeviceSk6822SPI.cpp
cp LedDeviceWs2812SPI.h LedDeviceSk6822SPI.h
cp schemas/schema-ws2812spi.json schemas/schema-sk6822spi.json
4) Do some search and replacing:
:%s/Ws2812SPI/Sk6822SPI/g
5) edit the other files (see the diffs in this commit)
* Added wait time and reset time
* Fixed up debugging output and commented it out.
* fix/refactor backlight stuff:
- fix colors dont turn of when backlight 0 and black is set
- add option to use not colored backlight
- fix colored backlight not colored on very low color values
- various code style tunings
* apply needed change to wizard
* backlight disabled on static color and efects
* fix warnings
* try fix udp compiler warnings
* - disable device when error indecates that the problem is not solvable on reconnect
- introduce a preOpenDelay of 2 seconds (currently value is hardcoded)
* rs232:
- make preOpenDelay available via webui
- fix preOpenDelay
- add basic usb serial detection
* - revert 3819ae7
- fix schema files
* make json checks compat with utf8+bom
* make shutdown effect a bit more flexible
* implement 404 for webserver - this is a quick hack, should be refactored later
* add http error pages ... design is more a placebo ;-)
* tune errorpages
fix some cgi related stuff, now only python is possible
executing and reading python file is possilbe, but it cannot receive any data from webui
* fix typo
* fix another typo
* implement config save over http post instead of json
* remove json set config
finish config write thrugh http post
* remove debug code and add failure messages
* fix save issue with white spaces
* implement config save over http post instead of json
* remove json set config
finish config write thrugh http post
* remove debug code and add failure messages
* - fix coloradjustment via hyperion remote
- several small cleanups/refactorings
* fix color is shown as unknown in json serverinfo
* fix active color is not shown when autoselect is reactivated
* add new rgbtransform
* activate rgbtransform
* integrate new transform and gamma in adjustment, disable transform
* fix brighness limit
* advance upper and lower thresholds
* start removing color transform
* adjust configs/schema
* implement json for new color adjustment
* finish hyperion-remote extension for new adjustment settings
* fix typos
* rename luminance to brightness
fix jsonapi for new adjustment
* fix some bugs in adjustments
* fix i18n
* fix gamma via json
* now brighness values goes from 0-1 with 0.5 is the default for all brighness is equal between the channels. less 0.5 all channels scaled down
to new brighness, above 0.5 if possible channel gets brighter - but brighness is not equal between the channels anymore
brighness value curve is now exponential instead of linear - this feels more natural
* hslv cleanup
* Rename test to test123
* Delete test123
* New color Ajustment
Trilinear interpolation between the 8 corners of the color cube (black, red, green, blue, cyan, magenta, yellow, white)
* Renaming
* overloading getadjustmentX()
* Renaming
* Additional renaming
* Added more RgbChannel
* Added more colors to channelAdjustment
* Added additional colors
* Added additional colors
* Added additional colors
* Added additional color adjustments
* Update MultiColorAdjustment.cpp
* Fixed black adjustment
* Color config in array form
* move name to general
add a version for config file
* start impl. config migrator
* fix typo amd set access level
* fix schemaa name
* fix schema
* add structure for config migrator
* add more structural things for config migrator
* fix not all grabber provide live video
* add schema for trails
* move name to general
add a version for config file
* start impl. config migrator
* fix typo amd set access level
* fix schemaa name
* fix schema
* add structure for config migrator
* on v4l screenshot, print out nosignal threshold values
* separate fractional parameters for no signal detection
* fully implement handling for "rainbow grabber"
* hyperion-v4l2 --screenshot can also evaluate best reagion and color for no signal detection
* tune output of no signal detection
* v4l outputs warninsg only, todo: make it adyustable
* typo
* v4l signal detection, now with validation checks
* remove obsolete schema files
* fix code style
* fix text typos
* code style
* on v4l screenshot, print out nosignal threshold values
* separate fractional parameters for no signal detection
* fully implement handling for "rainbow grabber"
* update lightberry sketches
update compilehowwto (windows disclaimer)
some refactoring in main cmakelists + preparation for windows compile
tune ada driver, set delayAfterConnect default to 1.5s because some arduino (e.g. mega r3) needs this
set priority min/max for grabber/network services - prevent colliding prios between webui/background stuff and grabbers/net services
* add check if config is writable. TODO do something usefull in webui
* fix indention error
* fix typo
* fix webui can't write led config
* typo
* fix cmakelists
* change methode of detecting linux
* always output latest version of config file to webui
* fix permissions after default config export
* tune code
* set permissions for exported effects
* use qt setperm instead of chmod
update effects code style a bit
* add fallback when config is not readable
* ui: when sending config, convert to utf8 to save size and avoid jumbo frames (todo: minify it)
jsonclient: add some constants for websocket frames (taken from https://github.com/zaphoyd/websocketpp/blob/master/websocketpp/frame.hpp)
* webui:
refactory of websocket connector
sended json data is always convert to utf8
* always output latest version of config file to webui
* fix permissions after default config export
* tune code
* set permissions for exported effects
* use qt setperm instead of chmod
update effects code style a bit
* add fallback when config is not readable
* refresh for all :-)
remove dups
* - integrate refresh leds for all devices
- fix schemas for led devices
* add minimum for rewrite time
* rewriteTime: add missing info in config examples
* Added latchtime web configuration for ws2801 device.
Fixed default to be 500000ns
* cleaner code using defaults and added "ns" to web schema
* oops... "ns" not "ms"
* rename platform rpi-pwm to rpi. remove original rpi platform
install symlink to bin folder
create effects folder for custom effects
* fix osx jobs evaluation
* - add rewrite time to serial leds
- rework adalight sketch
* add analog output
* adalight: add analog mode: last led
* tune adalight sketch to final state
move refresh code to leddevice base class, so every leddevice can use it
* - implement a global logbuffer
- providerrs232 reduce log spam
* logger add signal and start json push
* implement logger notifier ... need some cleanup
* imlement logview in webui - the layout stuff is basic atm and needs some tuning
* - implement a global logbuffer
- providerrs232 reduce log spam
* logger add signal and start json push
* implement logger notifier ... need some cleanup
* Update EffectEngine.h
* add reloadEffects function
* add readEffects function
* add reloadEffects function
* Call reloadEffects after handleCreateEffectCommand and handleDeleteEffectCommand
* Add ability to delete custom created Effects
* Add deleteEffect function to Hyperion-Remote
* Add deleteEffect function to Hyperion-Remote
* Update schema.json
* Update JsonSchemas.qrc
* Add schema-delete-effect.json
* Add deleteEffect function to JSON RPC
* Add deleteEffect function to JSON RPC
* Add Effect configuration file (.json) to Effect Definition
* Update EffectDefinition.h
* - remove feature of using multiple config files for automaticly start other hyperion instances
- add auto config file creation
- tune service files
* add auto path creation for initial default config
* debian package:
rename service to hyperiond
remove copy of config file
* remove color temperatire, its the same as color adjustment
* remove temperature from schema
* implement most part of v4l only colro settings,
now hyperion update knows from which component the colors come
* update configs
* fix webui config write
* reomve correction and temperature from hyperion-remote
* implement a function for easy json editor creation
* grabber and kodi moved to new editor func
* webui: implement conf editors
* add missing files and remove debug code
* switch rs232 provider to completly async transfer
* start of implementing a seperate init function for leddevices
* rename setconfig to init
* more fixes
* implement missing code
* fix code style
* remove debug code
* remove debug stuff
* set loglevel to original state
* extend image effects
add a basic light clock
* add alpha values to rainbow
* some effect tuning
* make seconds hand optional and change color to yellow
make blue hours hand always visible
* Started work on DMX512 rs232 device
cloned from sedu - no actual changes yet
* Implemented DMX protocol
Added baudrate debugging to ProviderRs232
* Added support for multiple DMX fixture types
* - effects now can use qt image effects
- rainbow swirtl is now suitable for any led layout - including matrix
* fix rainbow effect
* effect: add radialGradient
* fix some js errors
* optimize code
* try fix travis test not working as expected
* fix default config files
* fix config
* first try
* implement hyperion restart. core function is good, but needs a beeter structuring- something for next refactoring session ;-)
* several fixes (including osx)
merge with upstream
some refactoring
* add some eye candy to webui
* implement effects included in hyperiond binary
* cleanup
* remove install of effects dir. People who wants to develop effects has to copy them from github
effect params for initial effects can be changed in config permanently and other effect params can be changed
via json (currently only temporarily)
* fix schema of fadecandy
webui fix display of specific led options
* add leddevice write support
* cleanup
* webui: tune hue code
* when use json effect definition from putsiede hyperiond but want to use py script from inside hyperiond use ad a :
e.g. fade.py needs a fade.py near the json file, but :fade.py is taken from resource inside hyperiond
* add ability to di
* add abiloty to diable effcts via hyperion config
* use effect name instead of script in active effects and prio register
* finally solve open file handle during effect is playing. Now script is read before, then file closed and then t is run by python
* fix some webui things
- led config tabs
- inital loading screen
optimize qrc file generation
fix compile warning in hyperion.cpp
* cleanup
* more cleanup
* initial support for leddevice options
* fix schema and editor init
* fix led editor labels and schema
* add some led schemas
* led config: insert current values. not yet perfect, but it works
* tune editor style
* initial support for leddevice options
* fix schema and editor init
* fix led editor labels and schema
* add some led schemas
* led config: insert current values. not yet perfect, but it works
* split content and js
tune leds config
* implement connection lost page
* split js/html in huebridge
* add js action for connection lost
* extend led config
make connection loss nicer
* tune led code
add menu entry for grabber
* more tuning of webui
* switch back to botstrap textarea
add v4l to components
* add icon
* extend schema for jsoneditor
* implement ledcolors streaming with 4fps
* implement component state
* make hyperion websocket api event based
* implement new websocket handling for generalconf
* migrate all webui stuff to new event based websocket api
some cleanup ... now all html templates are in content
refactoring of web stuff
* add hyperionport to global
start impl. removing advanced key
* separate dashboard
serverinfo is updated every 3 seconds automatily
add input selection
cleanup and remove not needed stuff
* prepare infrastructure for server sided file execution
* webui minor fixes
* fix compile
* implement led layout view with live colors
* live led vies
* fix general conf
unrigister ledcolors request, when not on leds.html
* fix compiler warning
* prepare realtime ledview and enhance ui
* Changed default baud rate in schema for ws2812spi and sk6812spi
* now sets the default baud_rate speed to 2800000 if omitted.
Previously it used the ProviderSPI default which was 1000000 and guaranteed not to work
* Added warnings if the SPI baud rate is likely out of range
Added some debug statements to ProviderSpi
* initial tpm2net rewrite - doesnt compile yet
* new tpm2.net drive compiles.
rename old tmp2net typos to tpm2net
fixed compiler warning in ws2812b
* added packetsize calculations and the end of frame character.
Output looks good on tcpdump
* removed old tpm2net driver
renamed tpm2netnew to tpm2net
* make hyperion websocket api event based
* implement new websocket handling for generalconf
* migrate all webui stuff to new event based websocket api
some cleanup ... now all html templates are in content
refactoring of web stuff
* add hyperionport to global
start impl. removing advanced key
* separate dashboard
serverinfo is updated every 3 seconds automatily
add input selection
cleanup and remove not needed stuff
* prepare infrastructure for server sided file execution
* webui minor fixes
* fix compile
* fix amlogic for newer kernels
crosscompile stay on 32bit aml with kernel 3.10
* add new platform amlogic64. This is used e.g. for new wetek boxes hub and play2
* implement use of multiple v4l devices.
Not all v4l devices are compat with that or must be attaches to different usb controllers
* fix typo in config
spilt grabber components in "GRABBER" and "V4L"
If you have more leds configured than the SPI buffer can support you now get this:
[HYPERIOND LedDevice] <DEBUG> <ProviderSpi.cpp:92:writeBytes()> SPI failed to write. errno: 90, Message too long
* Replaced getoptplusplus with QCommandLineParser. Fixes#39
* enabling C++11 if possible
* enabling C++11 if possible
* fixed gcc compilation issues
* fixed linux builds and improved os x build
* trying to fix dispmanx
* trying to fix dispmanx
* simplified travis build script
* fixed argumentparser default values
* rewrote validator system and made sure default arguments are processed correctly
* rewrote validator system and made sure default arguments are processed correctly
* fixed bool vs. regular options
* oops... removing debug code
* reverted screenshot api change
* Fix throw error so it correctly fails on invalid output hostnames
* Fixed broken default /dev/spidev0.0 string
* UDP devices now use "host" and "port" rather than "output"
* commit debug code to save it due to merge
* migrate first devices to new device registry and configure on runtime
* fadecandy and rs232 resets device if config is set
* try to hunt crash on osx
* test commit if this works with osx
* refactor spi devices
* cleanup
* refactor leddevices file, tinkerforge and ws2812b
* refactor raw usb devices
* refactor udp devices
* - add tpm2net driver
- remove old udp driver from build (files left in place for reference for new udp driver)
- json serverinfo shows available leddevices
* finish rework part 2 of leddevices
* add schemas for leddevices.
currently only compiled in, but not usedx
* Fix "if" statement
Nach dem testen des Codes, leider übersehen und nicht rückgängig gemacht.
Entschuldigung.
* Move XRenderSetPictureFilter from "grab" to "setupResources" part
* Resize destination image to target screen dimension once
* Fix coding style and add check for image resize
* Add support for > 170 leds. These are send as multiple packets
Change default latchtime to be smaller
* code cleanup
* more code tidying
added *.swp to gitignore
* Started on support for sACN/E1.31/DMX512
Just a clone of udpraw for now
* It's ALIVE!!
This adds somewhat working DMX512/sACN/E1.31 support.
I've tested it against an ESPixelStick but have no other "real" hardware
TODO:
configure universe#
configure universe and led offset
configure source names (all hard coded now...)
* oops.... forgot that dmx element 0 isnt rgb data but needs to be zero
* added universe support in the config
assorted code cleanups
I have created a new Category "General" with several Settings for
Hyperion.
For now the Submit Button only console.log's the values.
Known Bug: For some reason it seems to do not load the bootstrap
correctly or maybe the Lib isn't compatible with the newest version of
bootstrap.
* Fixing the check of createKey in handleConfigSetCommand
* Update schema-config.json
* add overwrite option to configset command
* add overwrite option to setConfig function
* add overwrite option to setConfig function
* - update coding style
- add command for getting schema via json api
- json api: merge config commands into one single "config" command with subcommands
* make setconfig work
* Remove "endOfJson" Value
Deprecated value from Hypercon
* Remove "endOfJson" Value
Deprecated value from Hypercon
* Add writeJson function to JsonFactory
* ability to ignore required value in schema file
* Remove "endOfJson" Value
* Add handleConfigSetCommand function
* Add handleConfigSetCommand function
* Update JsonSchemas.qrc
* Update schema.json
* Update JsonSchemaChecker.cpp
* Add configSet command to Hyperion-remote
* Add setConfigFile function
* Add setConfigFile function
* Add schema-configset.json
* v4l errors won't lead to crash hyperiond (exceptions are catched)
v4l auto device mode with better log messages
createV4l in hyperiond.cpp refactored, now v4l is always available as long as it is compiled in
* change back, code accidently altered
* fix compile of dispmanx grabber
* implement enable/disable on runtime for:
- smoothing
- kodi
- udplistener
- boblight
* implement enable/disable for forwarder
refactor component
* - implement grabber enable/disable at runtime
- big grabber refactoring. now with common base class for all grabbers
* implement enable/disable at runtime for bb detector
* osx fix
* try to fix cutted travis output for osx build
* start ledclone
* led cloning: clone scan areas from original led
main: show exceptions, better exit
* tune json schema for new option. somwe cleanup
* fix warnings and bug for framebuffer selection. thx to clang brought by new osx buikld on travis
* make ledclone feature work flawlessly for effects too. Effect sees the ledstring without cloned leds.
cloned leds will be inserted just before sending to leddevice
additional: remove warnings and fix code style
* fix warning
* fixed OS X compatibility
* adding OS X travis test
* ignoring autogenerated files
* adding OS X travis test
* fixed os x building
* fixed os x building
* reduced ignore file
* v4l osx issue fixed
* improved qt5 detection
* disabled cleaning of child threads on os x for the time being
* fixed avahi on OS X
* add --sourceOff to hyperion-remote - this will select "off" source and set all leds to black
refactor new json stuff
make schema checker not so strict, do not require values that have defaults (not finished yet)
initialEffect config: effect is always an array, regardless if it is a color or an effect name
* make off source visible in active priority list
* transform initialeffect to qjson (except part of effect-args, this needs effectengine transformed to qjson)
* remove unneeded comment
* add web ui for source selection.
call http://hyperion_host:8099/select/index.html
current example needed json server on port 19444
* Replace std::string with QString
* Replace std::string with QString
* Replace std::string with QString
* Replace std::string with QString
* Convert JsonCPP Code to QTJson
Not all JsonCPP Code is converted to QTJson Code. See Pull Request for Details.
* Convert JsonCPP Code to QTJson
Not all JsonCPP Code is converted to QTJson Code. See Pull Request for Details.
* add ability to disably specific color corrections
update protobuf external
move smoothing out of color section
* update config
* update schema
* update schema
* - implement framegrabber type option
- framegrabber autoselect
- integrate x11 grabber in hyperiond
* add doxy
* v4l: select device by name
hyperiond: fix x11 grabber connection to kodichecker
config: tune default prios of boblight and v4l
* make v4l name finding case insensitive
* various fixes:
- add folder for firmware known as working with hyperion
- rs232: add debug message for close and do not repeat "port not found" message more than neccessary
- v4l2: fix grabber started on creation when set to disabled
- cmake: add new platform x86-dev - this as most code coverage and is usefull for test/development. This is not for release
* add hints for effect-args
* multi fix commit
- refactoring leddevicefactory
- adalight: default for "delayAfterConnect" is 1s now - needed for most arduino's because of there special behaviour on open
- fadecandy: new option for disabling configuration send - if you want to keep your fadecandy defaults
- Hyperion.cpp: simplify createSmoothing discussed in #105
- smoothing:
-- add option for continuous output
-- when updatedelay>0 and continousOutput is disabled, buffer is flushed correctly after no input is detected
* add doxygen to travis
* fix code
* fix compile fir ws281x pwm
* remove git merge stuff
* fix compile
* multi fix commit
- refactoring leddevicefactory
- adalight: default for "delayAfterConnect" is 1s now - needed for most arduino's because of there special behaviour on open
- fadecandy: new option for disabling configuration send - if you want to keep your fadecandy defaults
- Hyperion.cpp: simplify createSmoothing discussed in #105
- smoothing:
-- add option for continuous output
-- when updatedelay>0 and continousOutput is disabled, buffer is flushed correctly after no input is detected
* add doxygen to travis
* big kodichecker rework
- use new logger
- 'enable' flag in config
- startable on runtime (atm not stoppable and no reconfigure)
- rename xbmc to kodi
* remove unnecceasry checks for kodi
* make kodichecker stoppable and add reconfigure
* tune config
* common ledbuffer for color transform
hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer
other fixes:
fix compile bug in profiler
update doxygen config
* migrate logging for color transform classes
* prepare new logger in hyperion class
* implement hwledcount
* Update Hyperion.cpp
Fix off color
* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature
* remove colorcorrection completly
fix compile
* set colororder back to static
* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
* refactoring of RgbChannelAdjustment
* - remove rgbchannelcorrection, this was a dup of rgbchanneladjustment
- add cmake policy to hide warning
- tune code of rgbchanneltransform
* common ledbuffer for color transform
hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer
other fixes:
fix compile bug in profiler
update doxygen config
* migrate logging for color transform classes
* prepare new logger in hyperion class
* implement hwledcount
* Update Hyperion.cpp
Fix off color
* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature
* remove colorcorrection completly
fix compile
* set colororder back to static
* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
* refactoring of RgbChannelAdjustment
* common ledbuffer for color transform
hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer
other fixes:
fix compile bug in profiler
update doxygen config
* migrate logging for color transform classes
* prepare new logger in hyperion class
* implement hwledcount
* Update Hyperion.cpp
Fix off color
* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature
* remove colorcorrection completly
fix compile
* set colororder back to static
* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
* start implementening runtime start/stop for udplistener
* add signal slots for start/stop/statusChanged for better connectivity with other qt stuff
* fix typo
- if you listen to a multicast address, it now also listens to all ipv4 addresses
- shared udp sockets - multiple hyperiond instance can optionally share the same udp packets
* switch to new logger for folowing led devices:
LedDeviceAtmo
LedDeviceFactory
LedDeviceFadeCandy
LedDeviceHyperionUsbasp
LedDeviceLightpack-hidapi
LedDevicePiBlaster
LedDeviceWS281x
LedRs232Device
leddevice base class defines logger already as protected member _log
* migrate to new logger for led devices.
still todo:
LedDeviceWS2812b
LedDeviceWs2812SPI
LedDeviceTinkerforge
LedDeviceLightpack
LedDeviceMultiLightpack
* migrate leddevice tinkerforge to new logger
* migrate Lightpack and MultiLightpack to new logger
* switch to new logger for folowing led devices:
LedDeviceAtmo
LedDeviceFactory
LedDeviceFadeCandy
LedDeviceHyperionUsbasp
LedDeviceLightpack-hidapi
LedDevicePiBlaster
LedDeviceWS281x
LedRs232Device
leddevice base class defines logger already as protected member _log
* migrate to new logger for led devices.
still todo:
LedDeviceWS2812b
LedDeviceWs2812SPI
LedDeviceTinkerforge
LedDeviceLightpack
LedDeviceMultiLightpack
* Fixed compile error when no grabbers are defined
* Remove stupid avahi warning...
* Started on the new integrated UDP listener to replace the python effect.
Cloned boblight server and rename it to be UDP listener
It compiles!, It starts! it seems to work as a second boblight protocol server...
* moving from the exsting TCP to UDP.
i can catch packets now.. need to consider ditching the connection handling
* It kinda works right now.
UDP packets are received, led data is sent and hyperion displays them.
.... for a moment before going back to what it was doing
* It works!
looks like the default priority of 900 was fighting with something else that was also 900
commented out some udp packet debugging
* oops, forgot to add the changes the the previous commit
* resolving merge conflicts
* Fixed random http port due to uninitialized _port
* cleaning up compiler warning
* cleaned up CMakeLists to remove warning:
Note: No relevant classes found. No output generated.
* start step by step migration to new logger
* fix linking for serialport
* migrate effectengine to new logger
* tune log messages
* add commandline options for hyperiond to control verbosity
--silent
--verbose
--debug
* migrate serialport to qt5 serialport
* remove old serialport
add logging to serialport
* remove try catch - qt serialport uses plain return values
* tiny fix, but not working atm
* make it work, tested with adalight
* udplistener/boblight: use hyperion::getInstance
hyperiond: fix dispmanx is started twice
hyperiond: rework bootsequence - now named as InitalEffect
* pull out webconfig from hyperiondaemon to functional when daemon crashes
initialEffect: forbid foreground effect duration infinitiy
* Fixed compile error when no grabbers are defined
* Remove stupid avahi warning...
* Started on the new integrated UDP listener to replace the python effect.
Cloned boblight server and rename it to be UDP listener
It compiles!, It starts! it seems to work as a second boblight protocol server...
* moving from the exsting TCP to UDP.
i can catch packets now.. need to consider ditching the connection handling
* It kinda works right now.
UDP packets are received, led data is sent and hyperion displays them.
.... for a moment before going back to what it was doing
* It works!
looks like the default priority of 900 was fighting with something else that was also 900
commented out some udp packet debugging
* oops, forgot to add the changes the the previous commit
* resolving merge conflicts
* cleanup: remove ambiled device
as written at the forum this is no longer supported. All people should move to adalight. They just need to flash a new sketch.
* fix typo
* make hyperion to singelton.
remove arguments for config and hyperion - both are gettable via Hyperion::getInstance
* refactor hyperiond
* remove qt4 comapt
make zeroconf mandatory
refactor hyperiond
* xbmcchecker is now a singleton
* cleanup in hyperiond
zeroconf switchable between static and shared linking
* fix xbmcchecker
* extensive refactoring of hyperiond
webserver: make client ip information availabel in request object - preparation for ip filters
proto/json server, use hyperion::getInstance instead of hyperion argument
* move creation of hyperion core into hyperionDeamon class
cleanup
* make hyperion to singelton.
remove arguments for config and hyperion - both are gettable via Hyperion::getInstance
* refactor hyperiond
* remove qt4 comapt
make zeroconf mandatory
refactor hyperiond
* xbmcchecker is now a singleton
* cleanup in hyperiond
zeroconf switchable between static and shared linking
* fix xbmcchecker
* initial commit of webconfig
* update example config with webconfig and fix format of file
update debian postinst script for install example config
* fix compiling
add new web server command "serverinfo" to use in webapp to retrieve json port
* change web default port to 8099
* add cgi engine to webserver
* fix include
* initial commit of webconfig
* update example config with webconfig and fix format of file
update debian postinst script for install example config
* fix compiling
add new web server command "serverinfo" to use in webapp to retrieve json port
* change web default port to 8099
* implement make install
set CMAKE_INSTALL_PREFIX e.g. to /opt to install to /opt/hyperion
set ENABLE_SYSTEM_INSTALL to ON to activate installation
after compiling use
make install
or
make install/strip
(for performance/size optimized binaries - compile in Release to get best performance)
* cleanup cmake files
use
cmake -DINSTALL_PREFIX=/opt/hyperion ..
to install all files to hyperion or
cmake -DINSTALL_PREFIX=/usr/
to install to usr. install folders are linux standard. bin go to bin folder and additionals (effects) go to share/hyperion
* add uninstall target - be patient with that, this will remove files from your system
install service files to share/hyperion - if you want to use them you have to make a symlink to your location of service files
* optimize build release script
install service files into hyperion share folder (services not activated, this must be done by distribution package script)
initial support of cmake option -DPLATFORM= option. This selects platform specific cmake flags. no need for -DENABLE_... options (unless you want some special things)
automatic detect for apple build
* update submodule
* fix cmake error when no platform is given
* initial support for deb,rpm and tgz packages - no usefull content atm!
* make packeages contain usefull stuff
* add license
make packes more functional. package specific install missing yet
* implement debian postinstall
* disable rpm generation until it has a working state
* add hypercon compat
* add posibility for multiple config files. first one found is taken
* remove hyperion comaptlayer
services is not started automaticly
* rework debian postinstall:
- remove /opt compatibility complety. This makes more trouble as it is usefull
- when hyperiond already started, restart it
- cleanup
* add deb package dependencies
* wipe out last support for /opt installation
* change default effect path in config to /usr
* revert service files and config files
* remove last occurences of ENABLE_PROTOBUF
fix cmake warnings and make it ready for cmake 3
fix refactoring of hyperiond.cpp creates no objects for network services
* all arguments via reference ...
* fix xbmcchecker not working
* add logger class
* - profiler must be activated with ENABLE_PROFILER, otherwise an error will raise
-> this should prevent profiler gets into release code
* fix profiler
* make logger compat with older/partial c++11 versions (r.g. debian wheezy)
fix description of optionparser
fix atmoorb not compile for qt4. now it should compile for qt5 and 4
* make logger compiles with qt5 too
fix compiler warnings
* remove debug code
Former-commit-id: 6aa41351667caed712b1f28010dbedfca8a6a5a0
* implement make install
set CMAKE_INSTALL_PREFIX e.g. to /opt to install to /opt/hyperion
set ENABLE_SYSTEM_INSTALL to ON to activate installation
after compiling use
make install
or
make install/strip
(for performance/size optimized binaries - compile in Release to get best performance)
* cleanup cmake files
use
cmake -DINSTALL_PREFIX=/opt/hyperion ..
to install all files to hyperion or
cmake -DINSTALL_PREFIX=/usr/
to install to usr. install folders are linux standard. bin go to bin folder and additionals (effects) go to share/hyperion
* add uninstall target - be patient with that, this will remove files from your system
install service files to share/hyperion - if you want to use them you have to make a symlink to your location of service files
* optimize build release script
install service files into hyperion share folder (services not activated, this must be done by distribution package script)
initial support of cmake option -DPLATFORM= option. This selects platform specific cmake flags. no need for -DENABLE_... options (unless you want some special things)
automatic detect for apple build
* update submodule
* fix cmake error when no platform is given
* initial support for deb,rpm and tgz packages - no usefull content atm!
* make packeages contain usefull stuff
* add license
make packes more functional. package specific install missing yet
* implement debian postinstall
* disable rpm generation until it has a working state
* add hypercon compat
* add posibility for multiple config files. first one found is taken
* remove hyperion comaptlayer
services is not started automaticly
* rework debian postinstall:
- remove /opt compatibility complety. This makes more trouble as it is usefull
- when hyperiond already started, restart it
- cleanup
* add deb package dependencies
* wipe out last support for /opt installation
* change default effect path in config to /usr
* revert service files and config files
* remove last occurences of ENABLE_PROTOBUF
fix cmake warnings and make it ready for cmake 3
fix refactoring of hyperiond.cpp creates no objects for network services
* all arguments via reference ...
* fix xbmcchecker not working
* add logger class
* - profiler must be activated with ENABLE_PROFILER, otherwise an error will raise
-> this should prevent profiler gets into release code
* fix profiler
Former-commit-id: b716dd40dbf5b837356eec876d85ec71c86d5c6c
* implement make install
set CMAKE_INSTALL_PREFIX e.g. to /opt to install to /opt/hyperion
set ENABLE_SYSTEM_INSTALL to ON to activate installation
after compiling use
make install
or
make install/strip
(for performance/size optimized binaries - compile in Release to get best performance)
* cleanup cmake files
use
cmake -DINSTALL_PREFIX=/opt/hyperion ..
to install all files to hyperion or
cmake -DINSTALL_PREFIX=/usr/
to install to usr. install folders are linux standard. bin go to bin folder and additionals (effects) go to share/hyperion
* add uninstall target - be patient with that, this will remove files from your system
install service files to share/hyperion - if you want to use them you have to make a symlink to your location of service files
* optimize build release script
install service files into hyperion share folder (services not activated, this must be done by distribution package script)
initial support of cmake option -DPLATFORM= option. This selects platform specific cmake flags. no need for -DENABLE_... options (unless you want some special things)
automatic detect for apple build
* update submodule
* fix cmake error when no platform is given
* initial support for deb,rpm and tgz packages - no usefull content atm!
* make packeages contain usefull stuff
* add license
make packes more functional. package specific install missing yet
* implement debian postinstall
* disable rpm generation until it has a working state
* add hypercon compat
* add posibility for multiple config files. first one found is taken
* remove hyperion comaptlayer
services is not started automaticly
* rework debian postinstall:
- remove /opt compatibility complety. This makes more trouble as it is usefull
- when hyperiond already started, restart it
- cleanup
* add deb package dependencies
* wipe out last support for /opt installation
* change default effect path in config to /usr
* revert service files and config files
* remove last occurences of ENABLE_PROTOBUF
fix cmake warnings and make it ready for cmake 3
fix refactoring of hyperiond.cpp creates no objects for network services
Former-commit-id: 56e3e0d1014999b2555418c7b5a2898ac29fb5f1
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config
Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process
* reversing errant change to hyperion.systemd.sh
* cleaned up a couple of compiler warnings
* moved bitpair_to_byte initialiser to (hopefully) work with older GCC
* compiler warning in udp driver
removed some tabs in ws2812b.cpp
* formatting - spaces to tabs
* moved rpi_281x to tag sk6812-v1.0
* moving to my fork of rpi_281x
* removed dos line endings
* Found some more "dos" line ending files
Former-commit-id: c756e3ccc153fd36e23a26eff37a1230bdd4b9b4
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config
Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process
* reversing errant change to hyperion.systemd.sh
* adding support for SK6812 - not working yet
* Changed rpi_ws281x submodule to be penfold42's fork
* Set White to zero for now
* starting on the code to make the White led do stuff
* Added some basic whie led calculation
white = min(r,g,b)
r-=w, g-=w, b-=w
* cleaned up a couple of compiler warnings
* updated strip type to use corrected RGBW strip type
(the SK6812RGBW datasheet is wrong)
* moved bitpair_to_byte initialiser to (hopefully) work with older GCC
* compiler warning in udp driver
removed some tabs in ws2812b.cpp
* formatting - spaces to tabs
* moved rpi_281x to tag sk6812-v1.0
* attempt #3 at migrating the rpi_281x submodule to my fork/branch
* moving to my fork of rpi_281x
* Started implementing multiple RGB to RGBW conversion options
a quick hack has been implemented inside WS281x.cpp but ive started
moving this to RgbToRgbw.cpp for reuse by other led device types
* migrated RGB to RGBW conversion to RgbToRgbw.cpp
Former-commit-id: ff8e9038c4bb8203b71b42d12bf23be4abcc0b3b
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config
Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process
* reversing errant change to hyperion.systemd.sh
* added bonjour/zeroconf service discovery to the json interface.
When clients are also modified, they can
- find hyperiond on the network much more quickly than ping/portscan;
- find multiple instances running on different ports instead of assuming 19444
* Moved zeroconf calls to hyperiond.cpp
* Added mDNS/zerconf/bonjour registration for proto server
Added config options.
"jsonServer" :
{
"port" : 49444,
// "mDNSDescr" : "hyperiond jsonServer blah de blah",
"mDNSService" : "_hyperiond_json._tcp"
},
* cleaned up a couple of compiler warnings
* moved bitpair_to_byte initialiser to (hopefully) work with older GCC
* compiler warning in udp driver
removed some tabs in ws2812b.cpp
* formatting - spaces to tabs
* moved rpi_281x to tag sk6812-v1.0
* moving to my fork of rpi_281x
* Now uses the led device name and hostname to create the annouce name
Former-commit-id: abfa51bcf359cafa63338181c1b83ecfd231bc87
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config
Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process
* reversing errant change to hyperion.systemd.sh
* cleaned up a couple of compiler warnings
* moved bitpair_to_byte initialiser to (hopefully) work with older GCC
* compiler warning in udp driver
removed some tabs in ws2812b.cpp
* formatting - spaces to tabs
* moved rpi_281x to tag sk6812-v1.0
* moving to my fork of rpi_281x
* half way thru re merging the newudp support
* Whoops.... dont know how it compiled before..
* Removed debugging that was commented out
Former-commit-id: ac4330422f93f3d594dfcba5593759288298d25e
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config
Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process
* reversing errant change to hyperion.systemd.sh
* cleaned up a couple of compiler warnings
* moved bitpair_to_byte initialiser to (hopefully) work with older GCC
* compiler warning in udp driver
removed some tabs in ws2812b.cpp
* formatting - spaces to tabs
Former-commit-id: 42cc7325177c9fcc3d1bd29cbfe72f02118d3233
Only apply color channel if color is dominant. Grey color independent from color channels. Linear increase of color channel from grey to maximum.
Former-commit-id: cda9fca0084174877c45a7e9a867e6209ffe9e44
* dispmanx: fix grabber issues with certain widths and support cropping
The dispmanx grabber will produce garbage output if the destination
pitch is not set to a multiple of 64 bytes (16 RGBA pixels).
It can also fail when retrieving only a part of the image
(eg in 3DSBS or TAB mode).
Handle these cases by capturing the full image into a separate
buffer with the pitch set to an appropriate value and manually
handle 3D SBS/TAB left/top half copying.
At this point supporting cropping like in the V4L2 grabber is
rather easy and added as well. This'll help handling overscan
setups (old TVs) and removing (possibly asymmetric) overscan
borders.
Cropping is disabled in video capture mode (when the
DISPMANX_SNAPSHOT_FILL flag is set).
Signed-off-by: Matthias Reichl <hias@horus.com>
* hyperion-dispmanx: add optional crop values and 3D mode options
Signed-off-by: Matthias Reichl <hias@horus.com>
* hyperiond: support cropping on the dispmanx grabber
Honor cropLeft, cropRight, cropTop and cropBottom settings in
the framegrabber section of the conf file to control cropping.
Signed-off-by: Matthias Reichl <hias@horus.com>
Former-commit-id: bbb55f6621b90384e417f37da4f2543d112ef57a
* Kodi video checker patch to make it compliant with recent JSON RPC API specs.
* Updated inline documentation for Kodi video checker.
Former-commit-id: e0760f55e1ddd61f10ae457c485aa01ae4507260
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config
Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process
* reversing errant change to hyperion.systemd.sh
* This add a new device type - ws2812spi.
I've (ab)used the SPI interface to send the correct timing pulses to keep the ws2812 happy.
THE RATE IS IMPORTANT!
A FIXED CORE_CLK IS IMPORTANT!
Attach the SPI MOSI pin on the Pi to the DIN pin on your ws2812
"device" :
{
"name" : "MyPi",
"type" : "ws2812spi",
"colorOrder" : "grb",
"output" : "/dev/spidev0.0",
"rate" : 3800000
},
* updated hyperiond.test-binary
* Updated default SPI speed to the "correct" value.
My Pi was undervolted so was dropping the core clock confusing everything
* Code cleanups
explicitly set the final 3 bytes to 0
* Removed latchtime option - not applicable
* updated test binary
Former-commit-id: d3c19c8374999f7a554bb25ca181a8a483f86289
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config
Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process
* reversing errant change to hyperion.systemd.sh
* started bug fixes for APA strips with more physical leds than configured
* 1st cut of changes to APA102.
now looks at config for "leds" which is the # of hardware leds in the strip.
This enables us to write the correct trailer length in the packet.
Also fixed a bug where switchoff was writing the wrong # of leds
* removed commented out old code
removed debug printf
* included prebuild test binary for Pi2
* Second attempt at the fix.
BEFORE:
If you have more physcial LEDs than defined in the "leds" "index" section of the config there is random junk added to the end of the strip.
WITH THIS FIX:
In the "device" section specify the number of physical leds with:
"leds" : 212,
If this is greater than the number of led indexes, additional LEDs are set to black
If this is smaller than the number of led indexes, it is ignored
* included test binary
* Clean exit if the device config is missing or a non-supported device type is specified
Former-commit-id: 8ae96188fa74d91b13a921e7d5faf6d6ac1c42ee
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config
Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process
* reversing errant change to hyperion.systemd.sh
* Experimental changes to piblaster code to work how i think it should
It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led.
"assignment" : "rgbrgbrgb",
Would result in:
//Channel number GPIO number Led channel
// 0 4 0 red
// 1 17 0 green
// 2 18 0 blue
// 4 27 1 red
// 5 21 1 green
// 6 22 1 blue
// 7 23 2 red
// 8 24 2 green
// 9 25 2 blue
* Ammend pwm channel mapping comments to match the code
* 1st cut of the new more flexible piblaster pin mapping support
it works but is still rough
* removed old "assignment" handling
- prints an error messaage if found and terminates
fixed the switchoff method
* removing iPins hard coded list of valid GPIO pins
* removed iPins array for switchOff function
* code cleanups
input validation
* Handle catching (and ignoring) SIGPIPE.
You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover
* added a binary for testing
* Added sample config and my modified pi-blaster version to support more GPIOs
* moved hyperiond
* removed testing binaries
move sample configuration to the configs directory
* re enabled device config display
* removed sample configuration
Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
* Updated smoothing options for AtmoOrb, can now choose between Orb external or Hyperion's internal smoothing.
With skipSmoothingDif you can set the maximum allowed color difference before overriding / clearing Orb smoothing during faster color change like for instance color <-> black.
* Updated inline documentation.
* Fixed command type typo in AtmoOrb device.
* Corrected variable spelling in AtmoOrb device.
* Make smoothing also match equal values for AtmoOrb smoothing differential
Former-commit-id: 3eede43c2f76fa324f0144aeac0526b8125ad149
No functional changes, but
- files have been renamed
- the device name is now "file" not "test"
Former-commit-id: 3fbc03c3fe1d764654c1d28ebb80562ce6276ab1
2. Adds support for level shifters that invert the data
Config option - "invert" (integer)
if omitted, do not invert
if == 0, do not invert
if !=0, invert
Former-commit-id: fd5b2863a85b11ac3a8444d1e02822f852feb556
The RPi 2 and 3 have two PWM channels and 3 PWM pins available to the
gpio header. BCM18 and BCM12 run on PWM channel 0. BCM13 runs on PWM
channel 1. This change allows BCM13 to be used by allowing the PWM
channel to be specified.
Former-commit-id: 3693ab438c2b369e6307c262d32bba509409e5b9
Add a new WS281x driver which is a wrapper around jgarff's ws281x library which
works on Pi B+, Pi 2, Pi Zero and probably Pi 3 as well.
jgarff's ws281x library is included as a submodule
Former-commit-id: e473dfd36d31b14598da5e56e4b8bf9f2aa7bb24
But this doesn't protect if not forwarded to localhost "127.0.0.1". Loop connections across different hosts arn't detected too.
Former-commit-id: 464a80708ebd11c0f7c83dc87a1afe0f10e0e078
