Now the last stable will be used when the latest stable version have a higher version number than the last beta version. This only triggers when Beta Branch is used. If the user chooses Stable only stable versions will be considered.
Update Check:
- New Property which allows you to select stable or beta branch checks.
- This would rely on current versions.json. It selects the first version in list with you branch (stable, beta). If it is newer hyperion tells you that a update is available
- For this we should keep our deployment pipeline in mind to format the json this way.
Cleanup:
- I cleaned up the WebUI from dead links and the support page with the affiliate links and donation adresses as we don't have them under our control. Currently only disabled, not deleated
Switcher:
- If the address which is published via bonjour serve is IPv6 the Switcher was bugged. Fixed that.
- Increases linker performance under Linux builds by using Gold linker, if available
- ccache is used if available
- removed statistic class (Stats.cpp) from project due to the missing result (sorry @Brindosch)
- add LGTM bandges for code analysis overview
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- Video format MJPEG implemented (libjpeg/qimage)
- Inactive priorities are now skipped correctly (PriorityMuxer.cpp line 297)
- v4l configuration section replaced with an object (preparation for #542)
Protocol Buffer reimplemented to receive image data from third-party apps
The status of the component "UDPListener" is now displayed correctly in WebUI
Global signal names for WebUI added
fix ge2d mode
added ge2d single/combined ioctl call
speed up imageresampler
speed up amvideocap0 mode
added config to choose if amvideocap0 or ge2d grabber should be used
- More i18n
- Easy use of mutual exclusion in JsonAPI with QMutexLocker
- Smoothing type "linear" hidden in the WebUI, because there is currently only one
- Message forwarding implemented again
- For compatibility to home assistants and other remote controls, "activeEffects" and "activeLedColor" has been added to the JSON-RPC
- FlatBuffer clear now the Priority on disconnect
- The information "available V4L2 devices" is now only displayed if the device list is not empty
- LED device "PiBlaster" excluded from OSX build
* save it
* ws: multiframe receive now works
* port cfg write with autocorrect to jsonprocessor
cleanup
* cleanup
* cleanup
* add support for image data over ws binary frame
* - grabber auto off when not set as active prio
- join aml and fb - on aml platform both grabbers are needed, so they joind in one module and share one prio. user don't the the nasty magic behind
- aml: preparation for direct ge2d access
* just save it, in the middle of ge2d impl
* fix compile issues
* now grabbing works basicly
* add 3d support for ge2d
* next step, we got some video from aml
* switch back to rgba
* remove unfinished ge2d stuff
* commit missing changes
* some urgent fixes, needs some beautifying, but it works now
* fixes and refctoring
* add dynamic smoothing first step
* extend prio muxer to hold smoothing preset id
* add icons for systray
* fix missing changes in prio muxer
* implement specific smoothing params for effects
* refactoring: std::min/max to qMin/Max
* some code optimization
* fix schema and translation
* revoke change of python include order
* fix eol in effect shemas
* optimize random,candle and fadecandy json schemas
* revoke schema split
* add "getAutoCorrectedConfig" function
* revoke schema split
* revoke schema split
* revoke schema split
* Prevent compiler error if none grabber is available
* revoke schema split
* add "getAutoCorrectedConfig" function
* revoke schema split
* remove "configMigrator"
* remove "configMigrator"
* Change TestConfigFile to show how the autocorrection works
* revoke schema split
* revoke schema split
* remove "ConfigMigrator"
* remove "ConfigMigrator"
* remove "ConfigMigratorBase"
* remove "ConfigMigratorBase"
* Add QJsonUtils.h
* added ability "ignore-required"
It has been added the ability to correct the configuration without having to pay attention to the keyword "required" in the hyperion schema
* Allow Comments in Hyperion Schema
* add ability to ignore the "required" keyword in hyperion schema
* add ability to ignore the "required" keyword in hyperion schema
* add ability to ignore the "required" keyword in hyperion schema
* //Allow Comments in Hyperion Schema
* Update jsonschema.py to version 0.8.0 to support ...
references in json schema
* add RefResolver from jsonschema.py to resolve
references in hyperion schema
* remove dupe code
* split the hyperion schema in separatly files
For better readability
* add function "resolveReferences" to resolve
references in hyperion schema.
* remove CURRENT_CONFIG_VERSION
* remove CURRENT_CONFIG_VERSION
* split the hyperion schema in separatly files
For better readability
* Create schema-backgroundEffect.json
* Add the rest of the Hyperion schema via upload
* Remove Comments in config file
* Add return variable to function writeJson().
fix function resolveReferences().
edit function load() to handle QPair result from schemaChecker.
* edit function validate() to return QPair variable
* fit function loadEffectDefinition()
* fit function checkJson()
* Expand error check by dividing
"_error" variable in "_error" and "_schemaError".
Replace variable "bool" in validate() in QPair
* Extend function "cmd_cfg_set" to handle auto correction
* Extend function "loadConfig" to handle auto correction
* fix function loadConfig()
* Started implementing artnet/DMX support
It compiles, but certainly wont work just yet
* Fix up packet data and length
correct default udp port
The data looks ok in wireshark
* Code cleanup
Sequence runs from 1..255 not 0
fix universe > 255
* code cleanups and force even number of channels
* Fix potential endianness issue
* added support for 'x' channels per fixture with zero padding
its very basic support for now - it needs better multi universe support
* clean color adjustment
* now a prio duration of "0" means infinity
* implement dynamic 'just in time' initialization
* implement new brightness handling
* cahnge access level
* i18n fix
* - cleanup brightness stuff
- update webserver, now with initial ssl support
* - backlightThreshold is now 0-100 instead 0-1
- better performance for brightness - use piecewise linear instead of sqrt
* no smooth for efx
rework fade effect
* join strobe and fade effects
new effect "breath"
* - make transition efx to smooth mode more smooth
- fixes for pacman
- rework fade base effect - make it more versatile
- fix prios in schema files
- new notify blue effect to demonstrate capability of fade effect
* upd
* update
* update
* update schemachecker
* ...
* fix lowest priority
* zeroconf updates (#421) (#3)
* zeroconf:
add ip
make names more uniq
* tune dns name for webconfig
* update
* update
* update
* update ui
* ...
* min val for gamma
* lost somewhere this
* add status to hyperion object
* update ui
* start of integrating a bonkour service browser
* some experiments
* blub
* bonjour browser via jsonrpc ...
* fix indention
* - make leddevice as component
- extend sysinfo with domain
- add more data for bonjour browser (e.g. split domain and hostname)
* code cleanup
* add translation
* use component names instead of ids
* fix compile
* std::string -> qstring part 1
* more string migration
* more string migration ...
* ...
* more qstring mogrations
add sysinfo via json
* remove unneccessary includes
* integrate sysinfo into webui
* implement rigin for efx
* implement origin for effects and other components
add experimental adalight firmware for arduino with upto 5 pwm channels
* cleanup
* origin ip now with dns lookup
* fix compile
* move some code
* Adding support for sk6822 timing
This isnt complete, but should be a good starting point for others to learn from.
1) Here is where the led device source is located:
cd libsrc/leddevice
2) Find the files that need changing:
root@loungepi:libsrc/leddevice# grep -ri 2812spi *
CMakeLists.txt: ${CURRENT_SOURCE_DIR}/LedDeviceWs2812SPI.h
CMakeLists.txt: ${CURRENT_SOURCE_DIR}/LedDeviceWs2812SPI.cpp
LedDeviceFactory.cpp: #include "LedDeviceWs2812SPI.h"
LedDeviceFactory.cpp: REGISTER(Ws2812SPI);
LedDeviceSchemas.qrc: <file alias="schema-ws2812spi">schemas/schema-ws2812spi.json</file>
LedDeviceWs2812SPI.cpp:#include "LedDeviceWs2812SPI.h"
LedDeviceWs2812SPI.cpp:LedDeviceWs2812SPI::LedDeviceWs2812SPI(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp:LedDevice* LedDeviceWs2812SPI::construct(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp: return new LedDeviceWs2812SPI(deviceConfig);
LedDeviceWs2812SPI.cpp:bool LedDeviceWs2812SPI::init(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp:int LedDeviceWs2812SPI::write(const std::vector<ColorRgb> &ledValues)
LedDeviceWs2812SPI.h:class LedDeviceWs2812SPI : public ProviderSpi
LedDeviceWs2812SPI.h: LedDeviceWs2812SPI(const QJsonObject &deviceConfig);
3) Copy the existing files as a starting point:
cp LedDeviceWs2812SPI.cpp LedDeviceSk6822SPI.cpp
cp LedDeviceWs2812SPI.h LedDeviceSk6822SPI.h
cp schemas/schema-ws2812spi.json schemas/schema-sk6822spi.json
4) Do some search and replacing:
:%s/Ws2812SPI/Sk6822SPI/g
5) edit the other files (see the diffs in this commit)
* Added wait time and reset time
* Fixed up debugging output and commented it out.
* fix/refactor backlight stuff:
- fix colors dont turn of when backlight 0 and black is set
- add option to use not colored backlight
- fix colored backlight not colored on very low color values
- various code style tunings
* apply needed change to wizard
* backlight disabled on static color and efects
* fix warnings
* try fix udp compiler warnings
* - disable device when error indecates that the problem is not solvable on reconnect
- introduce a preOpenDelay of 2 seconds (currently value is hardcoded)
* rs232:
- make preOpenDelay available via webui
- fix preOpenDelay
- add basic usb serial detection
* - revert 3819ae7
- fix schema files
* make json checks compat with utf8+bom
* make shutdown effect a bit more flexible
* implement 404 for webserver - this is a quick hack, should be refactored later
* add http error pages ... design is more a placebo ;-)
* tune errorpages
fix some cgi related stuff, now only python is possible
executing and reading python file is possilbe, but it cannot receive any data from webui
* fix typo
* fix another typo
- NUM_LEDS becomes MAX_LEDS and any led data beyond that is ignored
Added a python udp listener and serial sender.
- Intended for windows users with a COM port based led strip.
- Works with hyperion
* implement config save over http post instead of json
* remove json set config
finish config write thrugh http post
* remove debug code and add failure messages
* fix save issue with white spaces
* new connection lost detection
* implement config save over http post instead of json
* remove json set config
finish config write thrugh http post
* remove debug code and add failure messages
* fix save issue with white spaces
* implement config save over http post instead of json
* remove json set config
finish config write thrugh http post
* remove debug code and add failure messages
* add new rgbtransform
* activate rgbtransform
* integrate new transform and gamma in adjustment, disable transform
* fix brighness limit
* advance upper and lower thresholds
* start removing color transform
* adjust configs/schema
* implement json for new color adjustment
* finish hyperion-remote extension for new adjustment settings
* fix typos
* rename luminance to brightness
fix jsonapi for new adjustment
* fix some bugs in adjustments
* fix i18n
* fix gamma via json
* now brighness values goes from 0-1 with 0.5 is the default for all brighness is equal between the channels. less 0.5 all channels scaled down
to new brighness, above 0.5 if possible channel gets brighter - but brighness is not equal between the channels anymore
brighness value curve is now exponential instead of linear - this feels more natural
* hslv cleanup
* move name to general
add a version for config file
* start impl. config migrator
* fix typo amd set access level
* fix schemaa name
* fix schema
* add structure for config migrator
* add more structural things for config migrator
* fix not all grabber provide live video
* add schema for trails
* move name to general
add a version for config file
* start impl. config migrator
* fix typo amd set access level
* fix schemaa name
* fix schema
* add structure for config migrator
