* Handle Exceptions in main & Pythoninit
* Have SSDPDiscover generic again
* Have SSDPDiscover generic again
* Change Info- to Debug logs as technical service messages
* Nanoleaf - When switched on, ensure UDP mode
* Include SQL Database in Cross-Compile instructions
* Fix Clazy (QT code checker) and clang Warnings
* Stop LedDevice:write for disabled device
* Nanoleaf: Fix uint printfs
* NanoLeaf: Fix indents to tabs
* NanoLeaf - Add debug verbosity switches
* Device switchability support, FileDevice with timestamp support
* Nanoleaf Light Panels now support External Control V2
* Enhance LedDeviceFile by Timestamp + fix readyness
* Stop color stream, if LedDevice disabled
* Nanoleaf - remove switchability
* Push progress
TODO: rework RESET, probably to main.cpp again
* resetPassword rework
* enable administration restriction
* add short cmd for userdata
* Js apis
* Refactor JsonCB class
* Add userToken Auth
* Feat: Close connection if ext clients when def pw is set
* Feat: Protect db against pw/token tests
* WebUi PW Support (#9)
* Initial WebUi Password Support
* Small changes
* Initial WebUi Password Support
* Small changes
* Basic WebUi Token support
* added "removeStorage", added uiLock, updated login page
* Small improvments
* Small change
* Fix: prevent downgrade of authorization
* Add translation for localAdminAuth
* Feat: Show always save button in led layout
* Revert "Feat: Show always save button in led layout"
This reverts commit caad1dfcde.
* Feat: Password change link in notification
* Fix: body padding modal overlap
* Feat: Add instance index to response on switch
* prevent schema error
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
* Feat: add pw save
* Feat: callout settings/pw replaced with notification
* Added new restricted ip api checkbox, initial instance localStorage support
* Added instance notification, added correct instance switch after page refresh (to last current instance)
* Optimize intention in wizard.js
* ":" from i18n json to code
* Changes for Responsive about site
* Feat: Add image sender to webui
This PR adds a new image sending feature to the webui and extends the api accordingly. In javascript the processing of images is horrible slow (without WASM), so the solution is at the API side with out-of-the-box power of Qt.
- The image cmd accepts now a raw image that is encoded with base64. Supported are all image formats that qt supports (enough)
- There is no real size limit. It will be automatically scaled down to max 2000px width or height according to aspect ratio
- It's possible to scale down through a new "scale" property if developer wants that.
- Test were successfull until 3MP pictues, 4k+ closes the websocket on browser side, so 2k is a decent value
- Adds a new image streaming feature from browser (tabs/applications/complete desktop as target). This works just if used with HTTPS PR#612 AND with a recent version of Firefox/Chrome
* Feat: Add SSL support for webserver + websocket
Finally, Hyperion reaches the SSL century!
- Uses by default a internal key and certificate to provide working HTTPS out-of-the-box
- Your browser won't like that, for a green ssl seal next to the browser address bar you need to use Let's Encrypt with a own legit domain. This is out of the scope of Hyperion
* WebUi: Instance Management Tweaks and Chars Needed Information
* WebUi: 3rd Party Licenses Tweaks
* WebUi: Apply changes from Brindosch PR #596
* WebUi: Changing i18n tokens and adding catch event for connection error
* WebUi: Adding Link to GitHub License Ressource if an error is catched
* Moved Token Management to Network Settings
* Fixed alignment of Token Settings Div if Help Tables are switched off
* Added Chars counter, new format of the div panel (footer), change i18n
* Added Explanation for Token Management
* Moved Token Management to Network Settings
* Fixed alignment of Token Settings Div if Help Tables are switched off
* Added Chars counter, new format of the div panel (footer), change i18n
* Added Explanation for Token Management
* i18n Fix
* Revert "i18n Fix"
This reverts commit 0186290689d8b140310d5376617a3d43429bb632.
* i18n Fix
libqt5sql5-sqlite appended to the dependency list
lgtm alerts fixed
added message forwarder to global settings
subscribe type leds-update appended (thanks @Brindosch)
Boblight server port check instead of error message
Race Condition of different priorities are prevented at startup
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- Added CodeDocs config file for customization
- Fixing LGTM alerts
- LGTM bug fixed again
- added token option to hyperion-remote
- fix DBManager::getDB()
- next bugfix
- correct broken signal from SettingManager to Hyperion
- Token list is created after the schema is fetched
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- versionBranch was renamed to watchedVersionBranch (including all variables and strings. even config)
- Enhancements for JSON Editor. Detection of advanced was not so good. Now you can see advaced if advanced or expert is selected. expert is the highest and should also make advanced visible.
- The levels default, advanced, expert are now also respected in the information tabs. Same logic as for the forms itself. Expert is highest and will also show all advanced settings.
Update Check:
- New Property which allows you to select stable or beta branch checks.
- This would rely on current versions.json. It selects the first version in list with you branch (stable, beta). If it is newer hyperion tells you that a update is available
- For this we should keep our deployment pipeline in mind to format the json this way.
Cleanup:
- I cleaned up the WebUI from dead links and the support page with the affiliate links and donation adresses as we don't have them under our control. Currently only disabled, not deleated
Switcher:
- If the address which is published via bonjour serve is IPv6 the Switcher was bugged. Fixed that.
Protocol Buffer reimplemented to receive image data from third-party apps
The status of the component "UDPListener" is now displayed correctly in WebUI
Global signal names for WebUI added
fix ge2d mode
added ge2d single/combined ioctl call
speed up imageresampler
speed up amvideocap0 mode
added config to choose if amvideocap0 or ge2d grabber should be used
- More i18n
- Easy use of mutual exclusion in JsonAPI with QMutexLocker
- Smoothing type "linear" hidden in the WebUI, because there is currently only one
- Message forwarding implemented again
- For compatibility to home assistants and other remote controls, "activeEffects" and "activeLedColor" has been added to the JSON-RPC
- FlatBuffer clear now the Priority on disconnect
- The information "available V4L2 devices" is now only displayed if the device list is not empty
- LED device "PiBlaster" excluded from OSX build
* add dynamic smoothing first step
* extend prio muxer to hold smoothing preset id
* add icons for systray
* fix missing changes in prio muxer
* implement specific smoothing params for effects
* refactoring: std::min/max to qMin/Max
* some code optimization
* fix schema and translation
* revoke change of python include order
* fix eol in effect shemas
* optimize random,candle and fadecandy json schemas
* clean color adjustment
* now a prio duration of "0" means infinity
* implement dynamic 'just in time' initialization
* implement new brightness handling
* cahnge access level
* i18n fix
* - cleanup brightness stuff
- update webserver, now with initial ssl support
* - backlightThreshold is now 0-100 instead 0-1
- better performance for brightness - use piecewise linear instead of sqrt
* no smooth for efx
rework fade effect
* join strobe and fade effects
new effect "breath"
* - make transition efx to smooth mode more smooth
- fixes for pacman
- rework fade base effect - make it more versatile
- fix prios in schema files
- new notify blue effect to demonstrate capability of fade effect
* upd
* update
* update
* update schemachecker
* ...
* fix lowest priority
* zeroconf updates (#421) (#3)
* zeroconf:
add ip
make names more uniq
* tune dns name for webconfig
* update
* update
* update
* update ui
* ...
* min val for gamma
* lost somewhere this
* add status to hyperion object
* update ui
* start of integrating a bonkour service browser
* some experiments
* blub
* bonjour browser via jsonrpc ...
* fix indention
* - make leddevice as component
- extend sysinfo with domain
- add more data for bonjour browser (e.g. split domain and hostname)
* code cleanup
* add translation
* use component names instead of ids
* fix compile
* fix/refactor backlight stuff:
- fix colors dont turn of when backlight 0 and black is set
- add option to use not colored backlight
- fix colored backlight not colored on very low color values
- various code style tunings
* apply needed change to wizard
* backlight disabled on static color and efects
* fix warnings
* try fix udp compiler warnings
* implement config save over http post instead of json
* remove json set config
finish config write thrugh http post
* remove debug code and add failure messages
* add new rgbtransform
* activate rgbtransform
* integrate new transform and gamma in adjustment, disable transform
* fix brighness limit
* advance upper and lower thresholds
* start removing color transform
* adjust configs/schema
* implement json for new color adjustment
* finish hyperion-remote extension for new adjustment settings
* fix typos
* rename luminance to brightness
fix jsonapi for new adjustment
* fix some bugs in adjustments
* fix i18n
* fix gamma via json
* now brighness values goes from 0-1 with 0.5 is the default for all brighness is equal between the channels. less 0.5 all channels scaled down
to new brighness, above 0.5 if possible channel gets brighter - but brighness is not equal between the channels anymore
brighness value curve is now exponential instead of linear - this feels more natural
* hslv cleanup
* move name to general
add a version for config file
* start impl. config migrator
* fix typo amd set access level
* fix schemaa name
* fix schema
* add structure for config migrator
* add more structural things for config migrator
* fix not all grabber provide live video
* add schema for trails
* move name to general
add a version for config file
* start impl. config migrator
* fix typo amd set access level
* fix schemaa name
* fix schema
* add structure for config migrator
* Added new Candle effect - like those fake flickering led candles
* Candle work...
code cleanups
parameter changes
schema file
english labels
* renamed a title
* candle effect german localisation
* fix typo in police.py
