* Handle Exceptions in main & Pythoninit
* Have SSDPDiscover generic again
* Have SSDPDiscover generic again
* Change Info- to Debug logs as technical service messages
* Nanoleaf - When switched on, ensure UDP mode
* Include SQL Database in Cross-Compile instructions
* Fix Clazy (QT code checker) and clang Warnings
* Stop LedDevice:write for disabled device
* Nanoleaf: Fix uint printfs
* NanoLeaf: Fix indents to tabs
* NanoLeaf - Add debug verbosity switches
* Device switchability support, FileDevice with timestamp support
* Nanoleaf Light Panels now support External Control V2
* Enhance LedDeviceFile by Timestamp + fix readyness
* Stop color stream, if LedDevice disabled
* Nanoleaf - remove switchability
* Fix MultiColorAdjustment, if led-range is greater lednum
* Fix logging
* LedFileDevice/LedDevice - add testing support
* New "Led Test" effect
* LedDeviceFile - Add chrono include + Allow Led rewrites for testing
* Stabilize Effects for LedDevices where latchtime = 0
* Update LedDeviceFile, allow latchtime = 0
* Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates
* Updates LedDeviceFile - Initialize via Open
* Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions
* Updates ProviderUDP - Remove throwing exceptions
* Framebuffer - Use precise timer
* TestSpi - Align to LedDevice updates
* Pretty Print CrossCompileHowTo as markdown-file
* Ensure that output is only written when LedDevice is ready
* Align APA102 Device to new device staging
* Logger - Remove clang warnings on extra semicolon
* Devices SPI - Align to Device stages and methods
* Fix cppcheck and clang findings
* Add Code-Template for new Devices
* Align devices to stages and methods, clean-up some code
* Allow to reopen LedDevice without restart
* Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes"
* Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic
* Expose LedDevice getLedCount and align signedness
* Handle Exceptions in main & Pythoninit
* Have SSDPDiscover generic again
* Have SSDPDiscover generic again
* Change Info- to Debug logs as technical service messages
* Nanoleaf - When switched on, ensure UDP mode
* Include SQL Database in Cross-Compile instructions
* Fix Clazy (QT code checker) and clang Warnings
* Stop LedDevice:write for disabled device
* Nanoleaf: Fix uint printfs
* NanoLeaf: Fix indents to tabs
* NanoLeaf - Add debug verbosity switches
* Device switchability support, FileDevice with timestamp support
* Nanoleaf Light Panels now support External Control V2
* Enhance LedDeviceFile by Timestamp + fix readyness
* Stop color stream, if LedDevice disabled
* Nanoleaf - remove switchability
* add dynamic smoothing first step
* extend prio muxer to hold smoothing preset id
* add icons for systray
* fix missing changes in prio muxer
* implement specific smoothing params for effects
* refactoring: std::min/max to qMin/Max
* some code optimization
* fix schema and translation
* revoke change of python include order
* fix eol in effect shemas
* optimize random,candle and fadecandy json schemas
* Started implementing artnet/DMX support
It compiles, but certainly wont work just yet
* Fix up packet data and length
correct default udp port
The data looks ok in wireshark
* Code cleanup
Sequence runs from 1..255 not 0
fix universe > 255
* code cleanups and force even number of channels
* Fix potential endianness issue
* added support for 'x' channels per fixture with zero padding
its very basic support for now - it needs better multi universe support
* add limit for write to leddevice
* add to default config
* add i18n
* extend xmas effect
* fix indention
* add check for minimum brightness
* adapt effects to fading and new minWriteTime
* remove old latchTime
rename minimumWriteTime to latchTime
make it as dev specific option
* set default for rewriteTime to 1s
pause smoothing on color too
* reenable smoothing for color - it looks nicer :-)
* fix timeout timer
* Added missing json document compilation to states retrieval.
* Major rework and implemented feature to increase brightness by a configurable factor.
* Made network manager property of the hue bridge class.
* Fixed some errors regarding model id handling.
* Removed early return.
* Update of philips hue schema for new parameter
* Adding support for sk6822 timing
This isnt complete, but should be a good starting point for others to learn from.
1) Here is where the led device source is located:
cd libsrc/leddevice
2) Find the files that need changing:
root@loungepi:libsrc/leddevice# grep -ri 2812spi *
CMakeLists.txt: ${CURRENT_SOURCE_DIR}/LedDeviceWs2812SPI.h
CMakeLists.txt: ${CURRENT_SOURCE_DIR}/LedDeviceWs2812SPI.cpp
LedDeviceFactory.cpp: #include "LedDeviceWs2812SPI.h"
LedDeviceFactory.cpp: REGISTER(Ws2812SPI);
LedDeviceSchemas.qrc: <file alias="schema-ws2812spi">schemas/schema-ws2812spi.json</file>
LedDeviceWs2812SPI.cpp:#include "LedDeviceWs2812SPI.h"
LedDeviceWs2812SPI.cpp:LedDeviceWs2812SPI::LedDeviceWs2812SPI(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp:LedDevice* LedDeviceWs2812SPI::construct(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp: return new LedDeviceWs2812SPI(deviceConfig);
LedDeviceWs2812SPI.cpp:bool LedDeviceWs2812SPI::init(const QJsonObject &deviceConfig)
LedDeviceWs2812SPI.cpp:int LedDeviceWs2812SPI::write(const std::vector<ColorRgb> &ledValues)
LedDeviceWs2812SPI.h:class LedDeviceWs2812SPI : public ProviderSpi
LedDeviceWs2812SPI.h: LedDeviceWs2812SPI(const QJsonObject &deviceConfig);
3) Copy the existing files as a starting point:
cp LedDeviceWs2812SPI.cpp LedDeviceSk6822SPI.cpp
cp LedDeviceWs2812SPI.h LedDeviceSk6822SPI.h
cp schemas/schema-ws2812spi.json schemas/schema-sk6822spi.json
4) Do some search and replacing:
:%s/Ws2812SPI/Sk6822SPI/g
5) edit the other files (see the diffs in this commit)
* Added wait time and reset time
* Fixed up debugging output and commented it out.
* - disable device when error indecates that the problem is not solvable on reconnect
- introduce a preOpenDelay of 2 seconds (currently value is hardcoded)
* rs232:
- make preOpenDelay available via webui
- fix preOpenDelay
- add basic usb serial detection
* - revert 3819ae7
- fix schema files
* make json checks compat with utf8+bom
* make shutdown effect a bit more flexible
* update lightberry sketches
update compilehowwto (windows disclaimer)
some refactoring in main cmakelists + preparation for windows compile
tune ada driver, set delayAfterConnect default to 1.5s because some arduino (e.g. mega r3) needs this
set priority min/max for grabber/network services - prevent colliding prios between webui/background stuff and grabbers/net services
* add check if config is writable. TODO do something usefull in webui
* fix indention error
* fix typo
* fix webui can't write led config
* typo
* fix cmakelists
* change methode of detecting linux
* refresh for all :-)
remove dups
* - integrate refresh leds for all devices
- fix schemas for led devices
* add minimum for rewrite time
* rewriteTime: add missing info in config examples
* Added latchtime web configuration for ws2801 device.
Fixed default to be 500000ns
* cleaner code using defaults and added "ns" to web schema
* oops... "ns" not "ms"
* rename platform rpi-pwm to rpi. remove original rpi platform
install symlink to bin folder
create effects folder for custom effects
* fix osx jobs evaluation
* - add rewrite time to serial leds
- rework adalight sketch
* add analog output
* adalight: add analog mode: last led
* tune adalight sketch to final state
move refresh code to leddevice base class, so every leddevice can use it
* Started work on DMX512 rs232 device
cloned from sedu - no actual changes yet
* Implemented DMX protocol
Added baudrate debugging to ProviderRs232
* Added support for multiple DMX fixture types
* first try
* implement hyperion restart. core function is good, but needs a beeter structuring- something for next refactoring session ;-)
* several fixes (including osx)
merge with upstream
some refactoring
* add some eye candy to webui
* implement effects included in hyperiond binary
* cleanup
* remove install of effects dir. People who wants to develop effects has to copy them from github
effect params for initial effects can be changed in config permanently and other effect params can be changed
via json (currently only temporarily)
* fix schema of fadecandy
webui fix display of specific led options
* add leddevice write support
* cleanup
* webui: tune hue code
* when use json effect definition from putsiede hyperiond but want to use py script from inside hyperiond use ad a :
e.g. fade.py needs a fade.py near the json file, but :fade.py is taken from resource inside hyperiond
* add ability to di
* add abiloty to diable effcts via hyperion config
* use effect name instead of script in active effects and prio register
* finally solve open file handle during effect is playing. Now script is read before, then file closed and then t is run by python
* fix some webui things
- led config tabs
- inital loading screen
optimize qrc file generation
fix compile warning in hyperion.cpp
* cleanup
* more cleanup
* initial support for leddevice options
* fix schema and editor init
* fix led editor labels and schema
* add some led schemas
* led config: insert current values. not yet perfect, but it works
* tune editor style
* initial support for leddevice options
* fix schema and editor init
* fix led editor labels and schema
* add some led schemas
* led config: insert current values. not yet perfect, but it works
* Changed default baud rate in schema for ws2812spi and sk6812spi
* now sets the default baud_rate speed to 2800000 if omitted.
Previously it used the ProviderSPI default which was 1000000 and guaranteed not to work
* Added warnings if the SPI baud rate is likely out of range
Added some debug statements to ProviderSpi
* initial tpm2net rewrite - doesnt compile yet
* new tpm2.net drive compiles.
rename old tmp2net typos to tpm2net
fixed compiler warning in ws2812b
* added packetsize calculations and the end of frame character.
Output looks good on tcpdump
* removed old tpm2net driver
renamed tpm2netnew to tpm2net
* commit debug code to save it due to merge
* migrate first devices to new device registry and configure on runtime
* fadecandy and rs232 resets device if config is set
* try to hunt crash on osx
* test commit if this works with osx
* refactor spi devices
* cleanup
* refactor leddevices file, tinkerforge and ws2812b
* refactor raw usb devices
* refactor udp devices
* - add tpm2net driver
- remove old udp driver from build (files left in place for reference for new udp driver)
- json serverinfo shows available leddevices
* finish rework part 2 of leddevices
* add schemas for leddevices.
currently only compiled in, but not usedx
LordGrey
Tobias Tangemann
Paulchen-Panther
LordGrey
penfold42
Paulchen Panther
Ansel Zandegran
Daniel
brindosch
redPanther
ntim
Rick van Hattem
redpanther