4.1 KiB
Install the required tools and dependencies
Debian/Ubuntu/Win10LinuxSubsystem
sudo apt-get update
sudo apt-get install git cmake build-essential qtbase5-dev libqt5serialport5-dev libusb-1.0-0-dev python-dev libxrender-dev libavahi-core-dev libavahi-compat-libdnssd-dev
ATTENTION Win10LinuxSubsystem we do not (/we can't) support using hyperion in linux subsystem of MS Windows 10, albeit some users tested it with success. Keep in mind to disable all linux specific led and grabber hardware via cmake. Because we use QT as framework in hyperion, serialport leds and network driven devices could work.
RPI Only
when you build on the rapberry pi and include the dispmanx grabber (which is the default) you also need the firmware including headers installed. This downloads the firmware from the raspberrypi github and copies the required files to the correct place. The firmware directory can be deleted afterwards if desired.
export FIRMWARE_DIR="raspberrypi-firmware"
git clone --depth 1 https://github.com/raspberrypi/firmware.git "$FIRMWARE_DIR"
sudo cp -R "$FIRMWARE_DIR/hardfp/opt/" /opt
Arch
See AUR for PKGBUILDs on arch. If the PKGBUILD does not work ask questions there please.
OSX
To install on OS X you either need Homebrew or Macport but Homebrew is the recommended way to install the packages. To use Homebrew XCode is required as well, use brew doctor to check your install.
First you need to install the dependencies:
brew install qt5
brew install cmake
brew install libusb
brew install doxygen
Compiling and installing Hyperion
The general quick way (without big comments)
be sure you fullfill the prerequisites above.
assume your home is /home/pi
git clone --recursive https://github.com/hyperion-project/hyperion.ng.git hyperion
cd hyperion
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release ..
make -j $(nproc)
# optional: install into your system
make install/strip
# to uninstall (not very well tested, please keep that in mind)
make uninstall
# ... or run it from compile directory
bin/hyperiond myconfig.json
# webui is located on localhost:8099
Download
Create hyperion directory and checkout the code from github
You might want to add --depth 1 to the git command if you only want to compile the current source and have no need for the entire git repository
export HYPERION_DIR="hyperion"
git clone --recursive https://github.com/hyperion-project/hyperion.ng.git "$HYPERION_DIR"
Note: If you forget the --recursive in above statement or you are updating an existing clone you need to clone the protobuf submodule by runnning the follwing two statements:
git submodule init
git submodule update
Preparations
Change into hyperion folder and create a build folder
cd "$HYPERION_DIR"
mkdir build
cd build
Generate the make files:
To generate make files with automatic platform detection and default settings:
This should fit to RPI, x86, amlogic/wetek
cmake -DCMAKE_BUILD_TYPE=Release ..
Developers on x86 linux should use:
cmake -DPLATFORM=x86-dev -DCMAKE_BUILD_TYPE=Release ..
To use framebuffer instead of dispmanx (for example on the cubox-i):
cmake -DENABLE_FB=ON -DCMAKE_BUILD_TYPE=Release ..
To generate make files on OS X:
After which you can run cmake with the correct qt5 path:
cmake -DCMAKE_PREFIX_PATH=/usr/local/Cellar/qt5/5.7.0 -DCMAKE_BUILD_TYPE=Release ..
Run make to build Hyperion
The -j $(nproc) specifies the amount of CPU cores to use.
make -j $(nproc)
On a mac you can use sysctl -n hw.ncpu to get the number of available CPU cores to use.
make -j $(sysctl -n hw.ncpu)
Install hyperion into your system
Copy all necessary files to /usr/local/share/hyperion
sudo make install/strip
If you want to install into another location call this before installing
cmake -DCMAKE_INSTALL_PREFIX=/home/pi/apps ..
This will install to /home/pi/apps/share/hyperion
Integrating hyperion into your system
... ToDo