mirror of
https://github.com/hyperion-project/hyperion.ng.git
synced 2023-10-10 13:36:59 +02:00
104 lines
3.1 KiB
Markdown
104 lines
3.1 KiB
Markdown
# Install the required tools and dependencies
|
|
|
|
```
|
|
sudo apt-get update
|
|
sudo apt-get install git cmake build-essential qtbase5-dev libqt5serialport5-dev libusb-1.0-0-dev python-dev libxrender-dev libavahi-core-dev libavahi-compat-libdnssd-dev
|
|
```
|
|
|
|
# RPI Only
|
|
when you build on the rapberry pi and include the dispmanx grabber (which is the default)
|
|
you also need the firmware including headers installed. This downloads the firmware from the raspberrypi github
|
|
and copies the required files to the correct place. The firmware directory can be deleted afterwards if desired.
|
|
|
|
```
|
|
export FIRMWARE_DIR="raspberrypi-firmware"
|
|
git clone --depth 1 https://github.com/raspberrypi/firmware.git "$FIRMWARE_DIR"
|
|
sudo cp -R "$FIRMWARE_DIR/hardfp/opt/" /opt
|
|
```
|
|
|
|
# Create hyperion directory and checkout the code from github
|
|
|
|
You might want to add `--depth 1` to the `git` command if you only want to compile the current source and have no need for the entire git repository
|
|
|
|
```
|
|
export HYPERION_DIR="hyperion"
|
|
git clone --recursive https://github.com/hyperion-project/hyperion.ng.git "$HYPERION_DIR"
|
|
```
|
|
|
|
**Note:** If you forget the --recursive in above statement or you are updating an existing clone you need to clone the protobuf submodule by runnning the follwing two statements:
|
|
```
|
|
git submodule init
|
|
git submodule update
|
|
```
|
|
|
|
# Create and enter the build directory
|
|
```
|
|
mkdir "$HYPERION_DIR/build"
|
|
cd "$HYPERION_DIR/build"
|
|
```
|
|
|
|
# Generate the make files:
|
|
|
|
To generate make files on the raspberry pi WITHOUT PWM SUPPORT:
|
|
```
|
|
cmake -DPLATFORM=rpi -DCMAKE_BUILD_TYPE=Release ..
|
|
```
|
|
|
|
To generate make files on the raspberry pi WITH PWM SUPPORT:
|
|
```
|
|
cmake -DPLATFORM=rpi-pwm -DCMAKE_BUILD_TYPE=Release ..
|
|
```
|
|
|
|
To generate make files on a regular x86 or amd64 system:
|
|
```
|
|
cmake -DPLATFORM=x86 -DCMAKE_BUILD_TYPE=Release ..
|
|
```
|
|
|
|
To generate make files on a amlogic system:
|
|
```
|
|
cmake -DPLATFORM=aml -DCMAKE_BUILD_TYPE=Release ..
|
|
```
|
|
|
|
To use framebuffer instead of dispmanx (for example on the *cubox-i*):
|
|
```
|
|
cmake -DENABLE_FB=ON -DCMAKE_BUILD_TYPE=Release ..
|
|
```
|
|
|
|
To generate make files on OS X:
|
|
|
|
To install on OS X you either need Homebrew or Macport but Homebrew is the recommended way to install the packages. To use Homebrew XCode is required as well, use `brew doctor` to check your install.
|
|
|
|
First you need to install the dependencies:
|
|
```
|
|
brew install qt5
|
|
brew install cmake
|
|
brew install libusb
|
|
brew install doxygen
|
|
```
|
|
|
|
After which you can run cmake with the correct qt5 path:
|
|
```
|
|
cmake -DENABLE_V4L2=OFF -DENABLE_OSX=ON -DCMAKE_PREFIX_PATH=/usr/local/Cellar/qt5/5.7.0 ..
|
|
```
|
|
|
|
# Run make to build Hyperion
|
|
The `-j $(nproc)` specifies the amount of CPU cores to use.
|
|
```
|
|
make -j $(nproc)
|
|
```
|
|
|
|
#After compile, to remove any stuff not needed for a release version.
|
|
```
|
|
strip bin/*
|
|
```
|
|
# The binaries are build in "$HYPERION_DIR/build/bin". You could copy those to /usr/bin
|
|
```
|
|
sudo cp ./bin/hyperion-remote /usr/bin/
|
|
sudo cp ./bin/hyperiond /usr/bin/
|
|
```
|
|
|
|
# Copy the effect folder (if you did not use the normal installation methode before)
|
|
```
|
|
sudo mkdir -p /usr/share/hyperion/effects && sudo cp -R ../effects/ /usr/share/hyperion/
|
|
```
|