1
0
mirror of https://github.com/azlux/log2ram.git synced 2023-10-10 13:37:24 +02:00
log2ram/README.md
David MICHEL 0dc5827f5c typo fix + fix rsync command
fix for #92 , bad fuzzy parameter
2019-09-20 14:18:54 +02:00

3.8 KiB
Raw Blame History

Log2Ram

Like ramlog for systemd (on debian 8 jessie for example).

Usefull for RaspberryPi for not writing on the SD card all the time. You need it because your SD card doesn't want to suffer anymore!

Explanations: The script creates a /var/log mount point in RAM. So any writing of the log to the /var/log folder will not actually be written to disk (in this case to the sd card for a raspberry card) but directly to RAM. By default, every days, the CRON will launch a synchronization of the RAM to the folder located on the physical disk. The script will also make this copy of RAM to disk in case of machine shutdown (but cannot do it in case of power failure). This way you avoid excessive writing on the SD card.

The script log2ram can work on every linux system. So you can use it with your own daemon manager if you don't have systemd.

Log2Ram is based on transient log for Systemd here : A transient /var/log


Menu

  1. Install
  2. Upgrade
  3. Customize
  4. It is working ?
  5. Uninstall

Install

curl -Lo log2ram.tar.gz https://github.com/azlux/log2ram/archive/master.tar.gz
tar xf log2ram.tar.gz
cd log2ram-master
chmod +x install.sh && sudo ./install.sh
cd ..
rm -r log2ram-master

REBOOT before installing anything else (for example apache2)

Upgrade

You need to stop log2ram (service log2ram stop) and start the install.

Customize

variables :

In the file /etc/log2ram.conf, there are three variables:

  • SIZE: defines the size the log folder will reserve into the RAM (default is 40M).
  • USE_RSYNC: Can be set to true if you prefer ´rsync´ rather than ´cp´. I use the command cp -u and rsync -X, I don't copy the all folder every time for optimization.
  • MAIL: Disables the error system mail if there is not enough place on RAM (if set to false)
  • ZL2R: Enable zram compatibility (false by default). Check the comment on the config file. See https://github.com/StuartIanNaylor/zram-swap-config to configure a zram space on your raspberry before enable this option.

refresh time:

By default Log2Ram writes to the HardDisk every day. If you think this is too much, you can move /etc/cron.daily/log2ram in an other cron folder, or remove it if you prefer writing logs only at stop/reboot.

It is working?

You can now check the mount folder in ram with (You will see lines with log2ram if working)

# df -h
…
log2ram          40M  532K   40M   2% /var/log
…

# mount
…
log2ram on /var/log type tmpfs (rw,nosuid,nodev,noexec,relatime,size=40960k,mode=755)
…

If you have issue with apache2, you can try to add apache2.service next to other services on the Before parameter in /etc/systemd/system/log2ram.service it will solve the pb

The log for log2ram will be written at: /var/log/log2ram.log

Compressor for zram. Usefull for the COMP_ALG of ZRAM on the config file.

Compressor name Ratio Compression Decompress.
zstd 1.3.4 -1 2.877 470 MB/s 1380 MB/s
zlib 1.2.11 -1 2.743 110 MB/s 400 MB/s
brotli 1.0.2 -0 2.701 410 MB/s 430 MB/s
quicklz 1.5.0 -1 2.238 550 MB/s 710 MB/s
lzo1x 2.09 -1 2.108 650 MB/s 830 MB/s
lz4 1.8.1 2.101 750 MB/s 3700 MB/s
snappy 1.1.4 2.091 530 MB/s 1800 MB/s
lzf 3.6 -1 2.077 400 MB/s 860 MB/s
Now, muffins for everyone!

Uninstall :(

(Because sometime we need it)

chmod +x /usr/local/bin/uninstall-log2ram.sh && sudo /usr/local/bin/uninstall-log2ram.sh