mirror of
https://github.com/node-red/node-red-nodes.git
synced 2023-10-10 13:36:58 +02:00
42 lines
1.3 KiB
Markdown
42 lines
1.3 KiB
Markdown
node-red-node-piface
|
|
====================
|
|
|
|
<a href="http://nodered.org" target="_new">Node-RED</a> nodes to control a <a href="http://www.piface.org.uk/products/piface_digital/" target="_new">PiFace Digital</a> add-on board for a Raspberry-Pi.
|
|
|
|
Install
|
|
-------
|
|
|
|
Run the following command in the root directory of your Node-RED install
|
|
|
|
npm install node-red-node-piface
|
|
|
|
|
|
Pre-reqs
|
|
--------
|
|
|
|
Requires the WiringPi gpio command to be installed in order to work. See the <a href="http://wiringpi.com" target="new">WiringPi site</a> for details on how to do this.
|
|
|
|
|
|
Usage
|
|
-----
|
|
|
|
A pair of input and output Node-RED nodes for the Raspberry Pi PiFace Digital add-on board.
|
|
|
|
###Output
|
|
|
|
The PiFace output node will set the selected relay, LED, or pin on or off depending on the value passed in. Expects a <b>msg.payload</b> with either a 1 or 0 (or true or false).
|
|
|
|
Requires the WiringPi gpio command in order to work (see pre-reqs).
|
|
|
|
###Input
|
|
|
|
The PiFace input node generates a <b>msg.payload</b> with either a 0 or 1 depending on the state of the input pin.
|
|
|
|
You may also enable the input pullup resistor if required.
|
|
|
|
The <b>msg.topic</b> is set to <i>piface/{the pin number}</i>
|
|
|
|
Requires the WiringPi gpio command in order to work (see pre-reqs).
|
|
|
|
<b>Note:</b> This node currently polls the pin every 250mS. This is not ideal as it loads the cpu.
|