mirror of
https://github.com/node-red/node-red-nodes.git
synced 2023-10-10 13:36:58 +02:00
28 lines
1.3 KiB
Markdown
28 lines
1.3 KiB
Markdown
node-red-node-sensortag
|
|
=======================
|
|
|
|
This node adds support to Node-RED to read from the Texas Instruments SensorTag.
|
|
|
|
The SensorTag is a Bluetooth LE device hosting the following sensors:
|
|
* Ambient & ir Temperature
|
|
* Barometric Pressure
|
|
* Humidity
|
|
* 3 axis Accelerometer
|
|
* 3 axis Magnetometer
|
|
* 3 axis Gyroscope
|
|
* 2 push Buttons
|
|
|
|
The config node allows the user to enable/disable any of the sensors listed above. The readings from
|
|
these sensors will be sent as a JSON object payload with the sensor name appended to the topic provided:
|
|
|
|
* Temperature - { topic: [topic_prefix]/temperature, payload: { ambient: 21.2, object: 33.0 } }
|
|
* Barometric Pressure - { topic: [topic_prefix]/pressure, payload: { pres: 1000.1 } }
|
|
* Humidity - { topic: [topic_prefix]/humidity , payload: { temp: 21.2, humidity: 88} }
|
|
* Accelerometer - { topic: [topic_prefix]/ , payload: { x:0.0, y:9.8, z:0.0 } }
|
|
* Magnetometer - { topic: [topic_prefix]/ , payload: { x:0.0, y:0.0, z:0.0 } }
|
|
* Gyroscope - { topic: [topic_prefix]/ , payload: { x:0.0, y:0.0, z:0.0 } }
|
|
* Buttons - { topic: [topic_prefix]/ , payload: { left: "down", right: "up"} }
|
|
|
|
The sensorTag library used by this node only supports using 1 SensorTag at once.
|
|
|
|
**NOTE:** Node-RED needs to be run as root inorder or access the Linux Bluetooth 4.0 system calls |