mirror of
https://github.com/node-red/node-red-nodes.git
synced 2023-10-10 13:36:58 +02:00
58 lines
2.6 KiB
Markdown
58 lines
2.6 KiB
Markdown
node-red-node-serialport
|
|
========================
|
|
|
|
<a href="http://nodered.org" target="noderedinfo">Node-RED</a> nodes to talk to
|
|
hardware serial ports.
|
|
|
|
## Install
|
|
|
|
To install the stable version use the `Menu - Manage palette` option and search for node-red-node-serialport, or run the following command in your Node-RED user directory, typically `~/.node-red`
|
|
|
|
npm i node-red-node-serialport
|
|
|
|
During install there may be multiple messages about optional compilation.
|
|
These may look like failures... as they report as failure to compile errors -
|
|
but often are warnings and the node will continue to install and, assuming nothing else
|
|
failed, you should be able to use it. Occasionally some platforms *will* require
|
|
you to install the full set of tools in order to compile the underlying package.
|
|
|
|
## Usage
|
|
|
|
Provides three nodes - one to receive messages, and one to send, and a request node which can send then wait for a response.
|
|
|
|
### Input
|
|
|
|
Reads data from a local serial port.
|
|
|
|
Clicking on the search icon will attempt to autodetect serial ports attached to
|
|
the device, however you many need to manually specify it. COM1, /dev/ttyUSB0, etc
|
|
|
|
It can either
|
|
|
|
- wait for a "split" character (default \n). Also accepts hex notation (0x0a).
|
|
- wait for a timeout in milliseconds from the first character received
|
|
- wait to fill a fixed sized buffer
|
|
|
|
It then outputs `msg.payload` as either a UTF8 ascii string or a binary Buffer object.
|
|
|
|
If no split character is specified, or a timeout or buffer size of 0, then a stream
|
|
of single characters is sent - again either as ascii chars or size 1 binary buffers.
|
|
|
|
### Output
|
|
|
|
Provides a connection to an outbound serial port.
|
|
|
|
Only the `msg.payload` is sent.
|
|
|
|
Optionally the character used to split the input can be appended to every message sent out to the serial port.
|
|
|
|
### Request
|
|
|
|
Provides a connection to a request/response serial port.
|
|
|
|
This node behaves as a tightly coupled combination of serial in and serial out nodes, with which it shares the configuration.
|
|
|
|
Send the request message in `msg.payload` as you would do with a serial out node. The message will be forwarded to the serial port following a strict FIFO (First In, First Out) queue, waiting for a single response before transmitting the next request. Once a response is received (with the same logic of a serial in node), or after a timeout occurs, a message is produced on the output, with msg.payload containing the received response (or missing in case if timeout), msg.status containing relevant info, and all other fields preserved.
|
|
|
|
For consistency with the serial in node, msg.port is also set to the name of the port selected.
|