基本Node繁體中文化

packages/node_modules/@node-red/nodes/locales/zh-TW/messages.json

@@ -0,0 +1,910 @@
+{
+    "common": {
+        "label": {
+            "payload": "內容",
+            "topic": "主題",
+            "name": "名稱",
+            "username": "使用者名稱",
+            "password": "密碼",
+            "property": "屬性"
+        },
+        "status": {
+            "connected": "已連接",
+            "not-connected": "未連接",
+            "disconnected": "已斷開",
+            "connecting": "連接中",
+            "error": "錯誤",
+            "ok": "確定"
+        },
+        "notification": {
+            "error": "<strong>錯誤</strong>: __message__",
+            "errors": {
+                "not-deployed": "節點未部署",
+                "no-response": "伺服器無反應",
+                "unexpected": "發生意外錯誤 (__status__) __message__"
+            }
+        },
+        "errors": {
+            "nooverride": "警告: 資訊的屬性已經不可以改寫節點的屬性. 詳情參考 bit.ly/nr-override-msg-props"
+        }
+    },
+    "inject": {
+        "inject": "注入",
+        "repeat": "重複 = __repeat__",
+        "crontab": "crontab = __crontab__",
+        "stopped": "停止",
+        "failed": "注入失敗: __error__",
+        "label": {
+            "repeat": "重複"
+        },
+        "timestamp": "時間戳記",
+        "none": "無",
+        "interval": "週期性執行",
+        "interval-time": "指定時間段並週期性執行",
+        "time": "指定時間",
+        "seconds": "秒",
+        "minutes": "分鐘",
+        "hours": "小時",
+        "between": "介於",
+        "previous": "之前數值",
+        "at": "在",
+        "and": "至",
+        "every": "每隔",
+        "days": [
+            "星期一",
+            "星期二",
+            "星期三",
+            "星期四",
+            "星期五",
+            "星期六",
+            "星期天"
+        ],
+        "on": "在",
+        "onstart": "立刻執行於",
+        "onceDelay": "秒後, 此後",
+        "tip": "<b>注意:</b> \"指定時間段並週期性執行\" 和 \"指定時間\" 會使用cron系統.<br/> 詳情查看信息頁.",
+        "success": "成功注入: __label__",
+        "errors": {
+            "failed": "注入失敗, 請查看日誌",
+            "toolong": "週期過長"
+        }
+    },
+    "catch": {
+        "catch": "監測所有節點",
+        "catchNodes": "監測__number__個節點",
+        "label": {
+            "source": "監測範圍",
+            "node": "節點",
+            "type": "類型",
+            "selectAll": "全選",
+            "sortByLabel": "按名稱排序",
+            "sortByType": "按類型排序"
+        },
+        "scope": {
+            "all": "所有節點",
+            "selected": "指定節點"
+        }
+    },
+    "status": {
+        "status": "報告所有節點狀態",
+        "statusNodes": "報告__number__個節點狀態",
+        "label": {
+            "source": "報告狀態範圍",
+            "node": "節點",
+            "type": "類型",
+            "selectAll": "全選",
+            "sortByLabel": "按名稱排序",
+            "sortByType": "按類型排序"
+        },
+        "scope": {
+            "all": "所有節點",
+            "selected": "指定節點"
+        }
+    },
+    "debug": {
+        "output": "輸出",
+        "msgprop": "資訊屬性",
+        "msgobj": "完整資訊",
+        "to": "目標",
+        "debtab": "除錯窗口",
+        "tabcon": "除錯窗口及Console",
+        "toSidebar": "除錯窗口",
+        "toConsole": "Console",
+        "toStatus": "節點狀態 (32位元字元)",
+        "severity": "級別",
+        "notification": {
+            "activated": "成功啟動: __label__",
+            "deactivated": "成功取消: __label__"
+        },
+        "sidebar": {
+            "label": "除錯窗口",
+            "name": "名稱",
+            "filterAll": "所有節點",
+            "filterSelected": "已選節點",
+            "filterCurrent": "當前流程",
+            "debugNodes": "除錯節點",
+            "clearLog": "清空日誌",
+            "openWindow": "在新視窗打開"
+        },
+        "messageMenu": {
+            "collapseAll": "折疊所有路徑",
+            "clearPinned": "清空已固定路徑",
+            "filterNode": "過濾此節點",
+            "clearFilter": "清空過濾條件"
+        }
+    },
+    "link": {
+        "linkIn": "輸入",
+        "linkOut": "輸出"
+    },
+    "tls": {
+        "tls": "TLS設置",
+        "label": {
+            "use-local-files": "使用本地密鑰及證書檔",
+            "upload": "上傳",
+            "cert": "證書",
+            "key": "私密金鑰",
+            "passphrase": "密碼",
+            "ca": "CA證書",
+            "verify-server-cert":"驗證伺服器憑證"
+        },
+        "placeholder": {
+            "cert":"憑證路徑 (PEM 格式)",
+            "key":"私密金鑰路徑 (PEM 格式)",
+            "ca":"CA憑證路徑 (PEM 格式)",
+            "passphrase":"私密金鑰密碼 (可選)"
+        },
+        "error": {
+            "missing-file": "未提供證書/金鑰檔案"
+        }
+    },
+    "exec": {
+        "label": {
+            "command": "命令",
+            "append": "追加",
+            "timeout": "超時",
+            "timeoutplace": "可選填",
+            "return": "輸出",
+            "seconds": "秒"
+        },
+        "placeholder": {
+            "extraparams": "額外的輸入參數"
+        },
+        "opt": {
+            "exec": "當命令完成時 - exec模式",
+            "spawn": "當命令進行時 - spawn模式"
+        },
+        "oldrc": "使用舊式輸出 (相容模式)"
+    },
+    "function": {
+        "label": {
+            "function": "函數",
+            "outputs": "輸出"
+        },
+        "error": {
+            "inputListener":"無法在函數中監聽對'注入'事件",
+            "non-message-returned":"函數節點嘗試返回類型為 __type__ 的資訊"
+        }
+    },
+    "template": {
+        "label": {
+            "template": "模版",
+            "property": "屬性",
+            "format": "語法高亮",
+            "syntax": "格式",
+            "output": "輸出為",
+            "mustache": "Mustache 模版",
+            "plain": "純文字",
+            "json": "JSON",
+            "yaml": "YAML",
+            "none": "無"
+        },
+        "templatevalue": "This is the payload: {{payload}} !"
+    },
+    "delay": {
+        "action": "行為設置",
+        "for": "時長",
+        "delaymsg": "延遲每一條資訊",
+        "delayfixed": "固定延遲時間",
+        "delayvarmsg": "允許msg.delay複寫延遲時長",
+        "randomdelay": "隨機延遲",
+        "limitrate": "限制資訊頻率",
+        "limitall": "所有資訊",
+        "limittopic": "每一個msg.topic",
+        "fairqueue": "依次發送每一個topic",
+        "timedqueue": "發所有topic",
+        "milisecs": "毫秒",
+        "secs": "秒",
+        "sec": "秒",
+        "mins": "分",
+        "min": "分",
+        "hours": "小時",
+        "hour": "小時",
+        "days": "天",
+        "day": "天",
+        "between": "介於",
+        "and": "至",
+        "rate": "速度",
+        "msgper": "信息 每",
+        "dropmsg": "不傳輸中間資訊",
+        "label": {
+            "delay": "延遲",
+            "variable": "變數",
+            "limit": "限制",
+            "limitTopic": "限制主題",
+            "random": "隨機",
+            "units" : {
+                "second": {
+                    "plural" : "秒",
+                    "singular": "秒"
+                },
+                "minute": {
+                    "plural" : "分鐘",
+                    "singular": "分鐘"
+                },
+                "hour": {
+                    "plural" : "小時",
+                    "singular": "小時"
+                },
+                "day": {
+                    "plural" : "天",
+                    "singular": "天"
+                }
+            }
+        },
+        "error": {
+            "buffer": "緩衝了超過 1000 條資訊",
+            "buffer1": "緩衝了超過 10000 條資訊"
+        }
+    },
+    "trigger": {
+        "send": "發送",
+        "then": "然後",
+        "then-send": "然後發送",
+        "output": {
+            "string": "字串",
+            "number": "數字",
+            "existing": "現有資訊物件",
+            "original": "原本資訊物件",
+            "latest": "最新資訊物件",
+            "nothing": "無"
+        },
+        "wait-reset": "等待被重置",
+        "wait-for": "等待",
+        "wait-loop": "週期性重發",
+        "duration": {
+            "ms": "毫秒",
+            "s": "秒",
+            "m": "分鐘",
+            "h": "小時"
+        },
+        "extend": " 如有新資訊，延長延遲",
+        "label": {
+            "trigger": "觸發",
+            "trigger-block": "觸發並阻止",
+            "trigger-loop": "週期性重發",
+            "reset": "重置觸發節點條件 如果:",
+            "resetMessage":"msg.reset已設置",
+            "resetPayload":"msg.payload等於",
+            "resetprompt": "可選填"
+        }
+    },
+    "comment": {
+    },
+    "unknown": {
+        "label": {
+            "unknown": "未知"
+        },
+        "tip": "<p>此節點是您安裝，但Node-RED所不知道的類型。</p><p><i>如果在此狀態下部署節點，那麼它的配置將被保留，但是流程將不會啟動，直到安裝缺少的節點。</i></p><p>有關更多説明，請參閱資訊側欄</p>"
+    },
+    "mqtt": {
+        "label": {
+            "broker": "服務端",
+            "example": "e.g. localhost",
+            "output": "輸出",
+            "qos": "QoS",
+            "clientid": "使用者端ID",
+            "port": "埠",
+            "keepalive": "Keepalive計時(秒)",
+            "cleansession": "使用新的會話",
+            "use-tls": "使用安全連接 (SSL/TLS)",
+            "tls-config":"TLS 設置",
+            "verify-server-cert":"驗證伺服器憑證",
+            "compatmode": "使用舊式MQTT 3.1支援"
+        },
+        "tabs-label": {
+            "connection": "連接",
+            "security": "安全",
+            "will": "Will信息",
+            "birth": "Birth信息"
+        },
+        "placeholder": {
+            "clientid": "留白則自動隨機生成",
+            "clientid-nonclean":"如非新會話，必須設置使用者端ID",
+            "will-topic": "留白將禁止Will資訊",
+            "birth-topic": "留白將禁止Birth資訊"
+        },
+        "state": {
+            "connected": "已連接到服務端: __broker__",
+            "disconnected": "已斷開與服務端 __broker__ 的連結",
+            "connect-failed": "與服務端 __broker__ 的連接失敗"
+        },
+        "retain": "保留",
+        "output": {
+            "buffer": "Buffer",
+            "string": "字串",
+            "base64": "Base64編碼字串"
+        },
+        "true": "是",
+        "false": "否",
+        "tip": "提示: 若希望通過msg屬性對topic(資訊), qos及retain(保留)進行設置, 則將上述項留白",
+        "errors": {
+            "not-defined": "主題未設置",
+            "missing-config": "未設置服務端",
+            "invalid-topic": "主題無效",
+            "nonclean-missingclientid": "使用者端ID未設定，使用新會話"
+        }
+    },
+    "httpin": {
+        "label": {
+            "method": "請求方式",
+            "url": "URL",
+            "doc": "文字檔",
+            "return": "返回",
+            "upload": "接受檔案上傳?",
+            "status": "狀態碼",
+            "headers": "Header",
+            "other": "其他"
+        },
+        "setby": "- 用 msg.method 設定 -",
+        "basicauth": "基本認證",
+        "use-tls": "使用安全連接 (SSL/TLS) ",
+        "tls-config":"TLS 設置",
+        "utf8": "UTF-8 字串",
+        "binary": "二進位資料",
+        "json": "JSON對象",
+        "tip": {
+            "in": "相對URL",
+            "res": "發送到此節點的消息<b>必須</b>來自<i>http input</i>節點",
+            "req": "提示：如果JSON解析失敗，則獲取的字串將按原樣返回."
+        },
+        "httpreq": "http 請求",
+        "errors": {
+            "not-created": "當httpNodeRoot為否時，無法創建http-in節點",
+            "missing-path": "無路徑",
+            "no-response": "無響應物件",
+            "json-error": "JSON 解析錯誤",
+            "no-url": "未設定 URL",
+            "deprecated-call":"__method__方法已棄用",
+            "invalid-transport":"非HTTP傳輸請求"
+        },
+        "status": {
+            "requesting": "請求中"
+        }
+    },
+    "websocket": {
+        "label": {
+            "type": "類型",
+            "path": "路徑",
+            "url": "URL"
+        },
+        "listenon": "監聽",
+        "connectto": "連接",
+        "sendrec": "發送/接受",
+        "payload": "有效載荷",
+        "message": "完整資訊",
+        "tip": {
+            "path1": "預設情況下，<code>payload</code>將包含要發送或從Websocket接收的資料。偵聽器可以配置為以JSON格式的字串發送或接收整個消息物件.",
+            "path2": "這條路徑將相對於 ",
+            "url1": "URL 應該使用ws:&#47;&#47;或者wss:&#47;&#47;方案並指向現有的websocket監聽器.",
+            "url2": "預設情況下，<code>payload</code> 將包含要發送或從Websocket接收的資料。可以將使用者端配置為以JSON格式的字串發送或接收整個消息物件."
+        },
+        "errors": {
+            "connect-error": "ws連接發生了錯誤: ",
+            "send-error": "發送時發生了錯誤: ",
+            "missing-conf": "未設置伺服器"
+        }
+    },
+    "watch": {
+        "label": {
+            "files": "文件",
+            "recursive": "遞迴所有子資料夾"
+        },
+        "placeholder": {
+            "files": "逗號分開文件或資料夾"
+        },
+        "tip": "在Windows上，請務必使用雙斜杠 \\\\ 來隔開資料夾名字"
+    },
+    "tcpin": {
+        "label": {
+            "type": "類型",
+            "output": "輸出",
+            "port": "埠",
+            "host": "主機位址",
+            "payload": "的有效載荷",
+            "delimited": "分隔符號號",
+            "close-connection": "是否在成功發送每條資訊後斷開連接?",
+            "decode-base64": "用 Base64 解碼信息?",
+            "server": "伺服器",
+            "return": "返回",
+            "ms": "毫秒",
+            "chars": "字元"
+        },
+        "type": {
+            "listen": "監聽",
+            "connect": "連接",
+            "reply": "回應 TCP"
+        },
+        "output": {
+            "stream": "字串流",
+            "single": "單一",
+            "buffer": "Buffer",
+            "string": "字串",
+            "base64": "Base64 字串"
+        },
+        "return": {
+            "timeout": "指定時間後",
+            "character": "當收到某個字元為",
+            "number": "指定字元數",
+            "never": "永不 - 保持連接",
+            "immed": "馬上 - 不需要等待回復"
+        },
+        "status": {
+            "connecting": "正在連接到 __host__:__port__",
+            "connected": "已經連接到 __host__:__port__",
+            "listening-port": "監聽埠 __port__",
+            "stopped-listening": "已停止監聽埠",
+            "connection-from": "連接來自 __host__:__port__",
+            "connection-closed": "連接已關閉 __host__:__port__",
+            "connections": "__count__ 個連接",
+            "connections_plural": "__count__ 個連接"
+
+        },
+        "errors": {
+            "connection-lost": "連接中斷 __host__:__port__",
+            "timeout": "超時關閉通訊端連接，埠 __port__",
+            "cannot-listen": "無法監聽埠 __port__, 錯誤: __error__",
+            "error": "錯誤: __error__",
+
+            "socket-error": "通訊端連接錯誤來自 __host__:__port__",
+            "no-host": "主機位址或埠未設定",
+            "connect-timeout": "連接逾時",
+            "connect-fail": "連接失敗"
+        }
+    },
+    "udp": {
+        "label": {
+            "listen": "監聽",
+            "onport": "埠",
+            "using": "使用",
+            "output": "輸出",
+            "group": "組",
+            "interface": "本地IP",
+            "interfaceprompt": "（可選）本地 IP 綁定到",
+            "send": "發送一個",
+            "toport": "到埠",
+            "address": "地址",
+            "decode-base64": "是否解碼Base64編碼的資訊?"
+        },
+        "placeholder": {
+            "interface": "（可選）eth0的IP地址",
+            "address": "目標IP位址"
+        },
+        "udpmsgs": "udp信息",
+        "mcmsgs": "群播信息",
+        "udpmsg": "udp信息",
+        "bcmsg": "廣播資訊",
+        "mcmsg": "群播信息",
+        "output": {
+            "buffer": "Buffer",
+            "string": "字串",
+            "base64": "Base64編碼字串"
+        },
+        "bind": {
+            "random": "綁定到任意本地埠",
+            "local": "綁定到本地埠",
+            "target": "綁定到目標埠"
+        },
+        "tip": {
+            "in": "提示：確保您的防火牆將允許資料進入",
+            "out": "提示：如果要使用<code>msg.ip</code>和<code>msg.port</code>設置，請將位址和埠留空",
+            "port": "正在使用埠: "
+        },
+        "status": {
+            "listener-at": "udp 監聽器正在監聽 __host__:__port__",
+            "mc-group": "udp 群播到 __group__",
+            "listener-stopped": "udp 監聽器已停止",
+            "output-stopped": "udp 輸出已停止",
+            "mc-ready": "udp 群播已準備好: __outport__ -> __host__:__port__",
+            "bc-ready": "udp 廣播已準備好: __outport__ -> __host__:__port__",
+            "ready": "udp 已準備好: __outport__ -> __host__:__port__",
+            "ready-nolocal": "udp 已準備好: __host__:__port__",
+            "re-use": "udp 重用通訊端: __outport__ -> __host__:__port__"
+        },
+        "errors": {
+            "access-error": "UDP 訪問錯誤, 你可能需要root許可權才能接入1024以下的埠",
+            "error": "錯誤: __error__",
+            "bad-mcaddress": "無效的群播地址",
+            "interface": "必須是指定介面的IP位址",
+            "ip-notset": "udp: IP地址未設定",
+            "port-notset": "udp: 埠未設定",
+            "port-invalid": "udp: 無效埠號碼",
+            "alreadyused": "udp: 埠已被佔用"
+        }
+    },
+    "switch": {
+        "label": {
+            "property": "屬性",
+            "rule": "規則",
+            "repair" : "重建資訊佇列"
+        },
+        "and": "與",
+        "checkall": "全選所有規則",
+        "stopfirst": "接受第一條匹配資訊後停止",
+        "ignorecase": "忽略大小寫",
+        "rules": {
+            "btwn":"在之間",
+            "cont":"包含",
+            "regex":"匹配規則運算式",
+            "true":"為真",
+            "false":"為假",
+            "null":"為空",
+            "nnull":"非空",
+            "head":"head",
+            "tail":"tail",
+            "index":"index between",
+            "exp":"JSONata運算式",
+            "else":"除此以外"
+        },
+        "errors": {
+            "invalid-expr": "無效的JSONata運算式: __error__",
+            "too-many" : "Switch節點中有太多待定信息"
+        }
+    },
+    "change": {
+        "label": {
+            "rules": "規則",
+            "rule": "規則",
+            "set": "設定 __property__",
+            "change": "修改 __property__",
+            "delete": "刪除 __property__",
+            "move": "移動 __property__",
+            "changeCount": "修改: __count__條規矩",
+            "regex": "使用規則運算式"
+        },
+        "action": {
+            "set": "設定",
+            "change": "修改",
+            "delete": "刪除",
+            "move": "轉移",
+            "to": "到",
+            "search": "搜索",
+            "replace": "替代為"
+        },
+        "errors": {
+            "invalid-from": "無效的'from'屬性: __error__",
+            "invalid-json": "無效的'to'JSON 屬性",
+            "invalid-expr": "無效的JSONata運算式: __error__"
+        }
+    },
+    "range": {
+        "label": {
+            "action": "操作",
+            "inputrange": "映射輸入資料",
+            "resultrange": "至目標範圍",
+            "from": "從",
+            "to": "到",
+            "roundresult": "取最接近整數？"
+        },
+        "placeholder": {
+            "min": "e.g. 0",
+            "maxin": "e.g. 99",
+            "maxout": "e.g. 255"
+        },
+        "scale": {
+            "payload": "按比例msg.payload",
+            "limit": "按比例並設定界限至目標範圍",
+            "wrap": "按比例並包含在目標範圍內"
+        },
+        "tip": "提示: 此節點僅對數字有效",
+        "errors": {
+            "notnumber": "不是一個數字"
+        }
+    },
+    "csv": {
+        "label": {
+            "columns": "列",
+            "separator": "分隔符號",
+            "c2o": "CSV至對象",
+            "o2c": "對象至CSV",
+            "input": "輸入",
+            "skip-s": "忽略前",
+            "skip-e": "行",
+            "firstrow": "第一行包含列名",
+            "output": "輸出",
+            "includerow": "包含列名行",
+            "newline": "分行符號"
+        },
+        "placeholder": {
+            "columns": "用逗號分割列名"
+        },
+        "separator": {
+            "comma": "逗號",
+            "tab": "Tab",
+            "space": "空格",
+            "semicolon": "分號",
+            "colon": "冒號",
+            "hashtag": "井號",
+            "other": "其他..."
+        },
+        "output": {
+            "row": "每行一條信息",
+            "array": "僅一條資訊 [陣列]"
+        },
+        "newline": {
+            "linux": "Linux (\\n)",
+            "mac": "Mac (\\r)",
+            "windows": "Windows (\\r\\n)"
+        },
+        "errors": {
+            "csv_js": "此節點僅處理CSV字串或JS物件",
+            "obj_csv": "對象->CSV轉換未設定列模版"
+        }
+    },
+    "html": {
+        "label": {
+            "select": "選取項",
+            "output": "輸出"
+        },
+        "output": {
+            "html": "選定元素的html內容",
+            "text": "選定元素的純文字內容",
+            "attr": "包含選定元素的所有屬性的物件"
+        },
+        "format": {
+            "single": "一條資訊 [陣列]",
+            "multi": "多條資訊，每條一個元素"
+        }
+    },
+    "json": {
+        "errors": {
+            "dropped-object": "忽略非物件格式的有效負載",
+            "dropped": "忽略不支援格式的有效負載類型",
+            "dropped-error": "轉換有效負載失敗"
+        },
+        "label": {
+            "o2j": "對象至JSON",
+            "pretty": "格式化JSON字串",
+            "action": "操作",
+            "property": "屬性",
+            "actions": {
+                "toggle": "JSON字串與物件互轉",
+                "str":"總是轉為JSON字串",
+                "obj":"總是轉為JS對象"
+            }
+        }
+    },
+    "yaml": {
+        "errors": {
+            "dropped-object": "忽略非物件格式的有效負載",
+            "dropped": "忽略不支援格式的有效負載類型",
+            "dropped-error": "轉換有效負載失敗"
+        }
+    },
+    "xml": {
+        "label": {
+            "represent": "XML標籤屬性的屬性名稱",
+            "prefix": "標籤文本內容的屬性名稱",
+            "advanced": "高級選項",
+            "x2o": "XML到物件選項"
+        },
+        "errors": {
+            "xml_js": "此節點僅處理XML字串或JS物件."
+        }
+    },
+    "rpi-gpio": {
+        "label": {
+            "gpiopin": "GPIO",
+            "selectpin": "選擇引腳",
+            "resistor": "電阻?",
+            "readinitial": "在部署/重啟時讀取引腳的初始狀態?",
+            "type": "類型",
+            "initpin": "初始化引腳狀態?",
+            "debounce": "去抖動",
+            "freq": "頻率",
+            "button": "按鈕",
+            "pimouse": "Pi滑鼠",
+            "pikeyboard": "Pi鍵盤",
+            "left": "左",
+            "right": "右",
+            "middle": "中"
+        },
+        "resistor": {
+            "none": "無",
+            "pullup": "上拉電阻",
+            "pulldown": "下拉電阻"
+        },
+        "digout": "數位輸出",
+        "pwmout": "PWM輸出",
+        "servo": "伺服輸出",
+        "initpin0": "初始引腳電平 - 低(0)",
+        "initpin1": "初始引腳電平 - 高(1)",
+        "left": "左",
+        "right": "右",
+        "middle": "中",
+        "any": "任何",
+        "pinname": "引腳",
+        "alreadyuse": "已被使用",
+        "alreadyset": "已被設為",
+        "tip": {
+            "pin": "<b>正在使用引腳</b>: ",
+            "in": "提示: 僅接受數位輸入 - 輸出必須為0或1.",
+            "dig": "提示: 如用數位輸出 - 輸入必須為0或1.",
+            "pwm": "提示: 如用PWM輸出 - 輸入必須為0至100之間; 如用高頻率可能會比預期佔用更多CPU資源.",
+            "ser": "<b>提示</b>: 如用伺服輸出 - 輸入必須為0至100之間. 50為中間值."
+        },
+        "types": {
+            "digout": "數位輸出",
+            "input": "輸入",
+            "pullup": "含有上拉電阻的輸入",
+            "pulldown": "含有下拉電阻的輸入",
+            "pwmout": "PWM輸出",
+            "servo": "伺服輸出"
+        },
+        "status": {
+            "stopped": "已停止",
+            "closed": "已關閉",
+            "not-running": "不運行"
+        },
+        "errors": {
+            "ignorenode": "忽略樹莓派的特定節點",
+            "version": "版本命令失敗",
+            "sawpitype": "查看Pi類型",
+            "libnotfound": "找不到樹莓派RPi.GPIO的python庫",
+            "alreadyset": "GPIO引腳 __pin__ 已經被設定為類型: __type__",
+            "invalidpin": "無效GPIO引腳",
+            "invalidinput": "無效輸入",
+            "needtobeexecutable": "__command__須為可運行命令",
+            "mustbeexecutable": "nrgpio須為可運行",
+            "commandnotfound": "nrgpio命令不存在",
+            "commandnotexecutable": "nrgpio命令不可運行",
+            "error": "錯誤: __error__",
+            "pythoncommandnotfound": "nrpgio python命令未處於運行狀態"
+        }
+    },
+    "file": {
+        "label": {
+            "filename": "檔案名",
+            "action": "行為",
+            "addnewline": "向每個有效載荷添加分行符號（\\n）?",
+            "createdir": "創建目錄（如果不存在）?",
+            "outputas": "輸出",
+            "breakchunks": "分拆成塊",
+            "breaklines": "分拆成行",
+            "filelabel": "文件",
+            "sendError": "發生錯誤時發送消息（傳統模式）",
+            "deletelabel": "刪除 __file__"
+        },
+        "action": {
+            "append": "追加至文件",
+            "overwrite": "複寫文件",
+            "delete": "刪除檔"
+        },
+        "output": {
+            "utf8": "一個utf8字串",
+            "buffer": "一個Buffer物件",
+            "lines": "每行一條信息",
+            "stream": "一個Buffer流"
+        },
+        "status": {
+            "wrotefile": "寫入至文件: __file__",
+            "deletedfile": "刪除檔: __file__",
+            "appendedfile": "追加至文件: __file__"
+        },
+        "errors": {
+            "nofilename": "未指定檔案名",
+            "invaliddelete": "警告：無效刪除。請在配置對話方塊中使用特定的刪除選項",
+            "deletefail": "無法刪除檔: __error__",
+            "writefail": "無法寫入文件: __error__",
+            "appendfail": "無法追加到文件: __error__",
+            "createfail": "檔創建失敗: __error__"
+        },
+        "tip": "提示: 檔案名應該是絕對路徑，否則它將相對於Node-RED進程的工作目錄。"
+    },
+    "split": {
+        "intro":"基於以下類型拆分<code>msg.payload</code>:",
+        "object":"<b>對象</b>",
+        "objectSend":"每個鍵值對作為單個消息發送",
+        "strBuff":"<b>字串</b> / <b>Buffer</b>",
+        "array":"<b>陣列</b>",
+        "splitUsing":"拆分使用",
+        "splitLength":"固定長度",
+        "stream":"作為消息流處理",
+        "addname":" 複製鍵到 "
+    },
+    "join":{
+        "mode":{
+            "mode":"模式",
+            "auto":"自動",
+            "merge":"合併序列",
+            "reduce":"縮減序列",
+            "custom":"手動"
+        },
+        "combine":"合併每個",
+        "create":"輸出為",
+        "type":{
+            "string":"字串",
+            "array":"陣列",
+            "buffer":"Buffer",
+            "object":"鍵值對對象",
+            "merged":"合併對象"
+        },
+        "using":"使用此值",
+        "key":"作為鍵",
+        "joinedUsing":"合併符號",
+        "send":"發送資訊:",
+        "afterCount":"達到一定數量的資訊時",
+        "count":"數量",
+        "subsequent":"和每個後續的消息",
+        "afterTimeout":"第一條消息的若干時間後",
+        "seconds":"秒",
+        "complete":"在收到存在<code>msg.complete</code>的消息後",
+        "tip":"此模式假定此節點與<i>split</i>相連, 或者接收到的消息有正確配置的<code>msg.parts</code>屬性.",
+        "too-many" : "join節點中有太多待定信息",
+        "merge": {
+            "topics-label":"合併主題",
+            "topics":"主題",
+            "topic" : "主題",
+            "on-change":"當收到一個新主題時發送已合併資訊"
+        },
+        "reduce": {
+            "exp": "Reduce運算式",
+            "exp-value": "exp",
+            "init": "初始值",
+            "right": "反向求值(從後往前)",
+            "fixup": "Fix-up exp"
+        },
+        "errors": {
+            "invalid-expr": "無效的JSONata運算式: __error__"
+        }
+    },
+    "sort" : {
+        "target" : "排序屬性",
+        "seq" : "資訊佇列",
+        "key" : "鍵值",
+        "elem" : "元素值",
+        "order" : "順序",
+        "ascending" : "昇冪",
+        "descending" : "降冪",
+        "as-number" : "作為數值",
+        "invalid-exp" : "sort節點中存在無效的JSONata運算式",
+        "too-many" : "sort節點中有太多待定信息",
+        "clear" : "清空sort節點中的待定資訊"
+    },
+    "batch" : {
+        "mode": {
+            "label" : "模式",
+            "num-msgs" : "按指定數量分組",
+            "interval" : "按時間間隔分組",
+            "concat" : "按主題分組"
+        },
+        "count": {
+            "label" : "分組數量",
+            "overlap" : "隊末隊首重疊數量",
+            "count" : "數量",
+            "invalid" : "無效的分組數量或重疊數量"
+        },
+        "interval": {
+            "label" : "時間間隔",
+            "seconds" : "秒",
+            "empty" : "無數據到達時發送空資訊"
+        },
+        "concat": {
+            "topics-label": "主題",
+            "topic" : "主題"
+        },
+        "too-many" : "batch節點中有太多待定信息",
+        "unexpected" : "未知模式",
+        "no-parts" : "資訊中沒有parts屬性"
+    }
+}