1
0
mirror of https://github.com/node-red/node-red.git synced 2023-10-10 13:36:53 +02:00
node-red/packages/node_modules/@node-red/nodes/locales/zh-TW/messages.json
2019-08-23 00:12:41 +08:00

911 lines
31 KiB
JSON
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{
"common": {
"label": {
"payload": "內容",
"topic": "主題",
"name": "名稱",
"username": "使用者名稱",
"password": "密碼",
"property": "屬性"
},
"status": {
"connected": "已連接",
"not-connected": "未連接",
"disconnected": "已斷開",
"connecting": "連接中",
"error": "錯誤",
"ok": "確定"
},
"notification": {
"error": "<strong>錯誤</strong>: __message__",
"errors": {
"not-deployed": "節點未部署",
"no-response": "伺服器無反應",
"unexpected": "發生意外錯誤 (__status__) __message__"
}
},
"errors": {
"nooverride": "警告: 資訊的屬性已經不可以改寫節點的屬性. 詳情參考 bit.ly/nr-override-msg-props"
}
},
"inject": {
"inject": "注入",
"repeat": "重複 = __repeat__",
"crontab": "crontab = __crontab__",
"stopped": "停止",
"failed": "注入失敗: __error__",
"label": {
"repeat": "重複"
},
"timestamp": "時間戳記",
"none": "無",
"interval": "週期性執行",
"interval-time": "指定時間段並週期性執行",
"time": "指定時間",
"seconds": "秒",
"minutes": "分鐘",
"hours": "小時",
"between": "介於",
"previous": "之前數值",
"at": "在",
"and": "至",
"every": "每隔",
"days": [
"星期一",
"星期二",
"星期三",
"星期四",
"星期五",
"星期六",
"星期天"
],
"on": "在",
"onstart": "立刻執行於",
"onceDelay": "秒後, 此後",
"tip": "<b>注意:</b> \"指定時間段並週期性執行\" 和 \"指定時間\" 會使用cron系統.<br/> 詳情查看信息頁.",
"success": "成功注入: __label__",
"errors": {
"failed": "注入失敗, 請查看日誌",
"toolong": "週期過長"
}
},
"catch": {
"catch": "監測所有節點",
"catchNodes": "監測__number__個節點",
"label": {
"source": "監測範圍",
"node": "節點",
"type": "類型",
"selectAll": "全選",
"sortByLabel": "按名稱排序",
"sortByType": "按類型排序"
},
"scope": {
"all": "所有節點",
"selected": "指定節點"
}
},
"status": {
"status": "報告所有節點狀態",
"statusNodes": "報告__number__個節點狀態",
"label": {
"source": "報告狀態範圍",
"node": "節點",
"type": "類型",
"selectAll": "全選",
"sortByLabel": "按名稱排序",
"sortByType": "按類型排序"
},
"scope": {
"all": "所有節點",
"selected": "指定節點"
}
},
"debug": {
"output": "輸出",
"msgprop": "資訊屬性",
"msgobj": "完整資訊",
"to": "目標",
"debtab": "除錯窗口",
"tabcon": "除錯窗口及Console",
"toSidebar": "除錯窗口",
"toConsole": "Console",
"toStatus": "節點狀態 (32位元字元)",
"severity": "級別",
"notification": {
"activated": "成功啟動: __label__",
"deactivated": "成功取消: __label__"
},
"sidebar": {
"label": "除錯窗口",
"name": "名稱",
"filterAll": "所有節點",
"filterSelected": "已選節點",
"filterCurrent": "當前流程",
"debugNodes": "除錯節點",
"clearLog": "清空日誌",
"openWindow": "在新視窗打開"
},
"messageMenu": {
"collapseAll": "折疊所有路徑",
"clearPinned": "清空已固定路徑",
"filterNode": "過濾此節點",
"clearFilter": "清空過濾條件"
}
},
"link": {
"linkIn": "輸入",
"linkOut": "輸出"
},
"tls": {
"tls": "TLS設置",
"label": {
"use-local-files": "使用本地密鑰及證書檔",
"upload": "上傳",
"cert": "證書",
"key": "私密金鑰",
"passphrase": "密碼",
"ca": "CA證書",
"verify-server-cert":"驗證伺服器憑證"
},
"placeholder": {
"cert":"憑證路徑 (PEM 格式)",
"key":"私密金鑰路徑 (PEM 格式)",
"ca":"CA憑證路徑 (PEM 格式)",
"passphrase":"私密金鑰密碼 (可選)"
},
"error": {
"missing-file": "未提供證書/金鑰檔案"
}
},
"exec": {
"label": {
"command": "命令",
"append": "追加",
"timeout": "超時",
"timeoutplace": "可選填",
"return": "輸出",
"seconds": "秒"
},
"placeholder": {
"extraparams": "額外的輸入參數"
},
"opt": {
"exec": "當命令完成時 - exec模式",
"spawn": "當命令進行時 - spawn模式"
},
"oldrc": "使用舊式輸出 (相容模式)"
},
"function": {
"label": {
"function": "函數",
"outputs": "輸出"
},
"error": {
"inputListener":"無法在函數中監聽對'注入'事件",
"non-message-returned":"函數節點嘗試返回類型為 __type__ 的資訊"
}
},
"template": {
"label": {
"template": "模版",
"property": "屬性",
"format": "語法高亮",
"syntax": "格式",
"output": "輸出為",
"mustache": "Mustache 模版",
"plain": "純文字",
"json": "JSON",
"yaml": "YAML",
"none": "無"
},
"templatevalue": "This is the payload: {{payload}} !"
},
"delay": {
"action": "行為設置",
"for": "時長",
"delaymsg": "延遲每一條資訊",
"delayfixed": "固定延遲時間",
"delayvarmsg": "允許msg.delay複寫延遲時長",
"randomdelay": "隨機延遲",
"limitrate": "限制資訊頻率",
"limitall": "所有資訊",
"limittopic": "每一個msg.topic",
"fairqueue": "依次發送每一個topic",
"timedqueue": "發所有topic",
"milisecs": "毫秒",
"secs": "秒",
"sec": "秒",
"mins": "分",
"min": "分",
"hours": "小時",
"hour": "小時",
"days": "天",
"day": "天",
"between": "介於",
"and": "至",
"rate": "速度",
"msgper": "信息 每",
"dropmsg": "不傳輸中間資訊",
"label": {
"delay": "延遲",
"variable": "變數",
"limit": "限制",
"limitTopic": "限制主題",
"random": "隨機",
"units" : {
"second": {
"plural" : "秒",
"singular": "秒"
},
"minute": {
"plural" : "分鐘",
"singular": "分鐘"
},
"hour": {
"plural" : "小時",
"singular": "小時"
},
"day": {
"plural" : "天",
"singular": "天"
}
}
},
"error": {
"buffer": "緩衝了超過 1000 條資訊",
"buffer1": "緩衝了超過 10000 條資訊"
}
},
"trigger": {
"send": "發送",
"then": "然後",
"then-send": "然後發送",
"output": {
"string": "字串",
"number": "數字",
"existing": "現有資訊物件",
"original": "原本資訊物件",
"latest": "最新資訊物件",
"nothing": "無"
},
"wait-reset": "等待被重置",
"wait-for": "等待",
"wait-loop": "週期性重發",
"duration": {
"ms": "毫秒",
"s": "秒",
"m": "分鐘",
"h": "小時"
},
"extend": " 如有新資訊,延長延遲",
"label": {
"trigger": "觸發",
"trigger-block": "觸發並阻止",
"trigger-loop": "週期性重發",
"reset": "重置觸發節點條件 如果:",
"resetMessage":"msg.reset已設置",
"resetPayload":"msg.payload等於",
"resetprompt": "可選填"
}
},
"comment": {
},
"unknown": {
"label": {
"unknown": "未知"
},
"tip": "<p>此節點是您安裝但Node-RED所不知道的類型。</p><p><i>如果在此狀態下部署節點,那麼它的配置將被保留,但是流程將不會啟動,直到安裝缺少的節點。</i></p><p>有關更多説明,請參閱資訊側欄</p>"
},
"mqtt": {
"label": {
"broker": "服務端",
"example": "e.g. localhost",
"output": "輸出",
"qos": "QoS",
"clientid": "使用者端ID",
"port": "埠",
"keepalive": "Keepalive計時(秒)",
"cleansession": "使用新的會話",
"use-tls": "使用安全連接 (SSL/TLS)",
"tls-config":"TLS 設置",
"verify-server-cert":"驗證伺服器憑證",
"compatmode": "使用舊式MQTT 3.1支援"
},
"tabs-label": {
"connection": "連接",
"security": "安全",
"will": "Will信息",
"birth": "Birth信息"
},
"placeholder": {
"clientid": "留白則自動隨機生成",
"clientid-nonclean":"如非新會話必須設置使用者端ID",
"will-topic": "留白將禁止Will資訊",
"birth-topic": "留白將禁止Birth資訊"
},
"state": {
"connected": "已連接到服務端: __broker__",
"disconnected": "已斷開與服務端 __broker__ 的連結",
"connect-failed": "與服務端 __broker__ 的連接失敗"
},
"retain": "保留",
"output": {
"buffer": "Buffer",
"string": "字串",
"base64": "Base64編碼字串"
},
"true": "是",
"false": "否",
"tip": "提示: 若希望通過msg屬性對topic(資訊), qos及retain(保留)進行設置, 則將上述項留白",
"errors": {
"not-defined": "主題未設置",
"missing-config": "未設置服務端",
"invalid-topic": "主題無效",
"nonclean-missingclientid": "使用者端ID未設定使用新會話"
}
},
"httpin": {
"label": {
"method": "請求方式",
"url": "URL",
"doc": "文字檔",
"return": "返回",
"upload": "接受檔案上傳?",
"status": "狀態碼",
"headers": "Header",
"other": "其他"
},
"setby": "- 用 msg.method 設定 -",
"basicauth": "基本認證",
"use-tls": "使用安全連接 (SSL/TLS) ",
"tls-config":"TLS 設置",
"utf8": "UTF-8 字串",
"binary": "二進位資料",
"json": "JSON對象",
"tip": {
"in": "相對URL",
"res": "發送到此節點的消息<b>必須</b>來自<i>http input</i>節點",
"req": "提示如果JSON解析失敗則獲取的字串將按原樣返回."
},
"httpreq": "http 請求",
"errors": {
"not-created": "當httpNodeRoot為否時無法創建http-in節點",
"missing-path": "無路徑",
"no-response": "無響應物件",
"json-error": "JSON 解析錯誤",
"no-url": "未設定 URL",
"deprecated-call":"__method__方法已棄用",
"invalid-transport":"非HTTP傳輸請求"
},
"status": {
"requesting": "請求中"
}
},
"websocket": {
"label": {
"type": "類型",
"path": "路徑",
"url": "URL"
},
"listenon": "監聽",
"connectto": "連接",
"sendrec": "發送/接受",
"payload": "有效載荷",
"message": "完整資訊",
"tip": {
"path1": "預設情況下,<code>payload</code>將包含要發送或從Websocket接收的資料。偵聽器可以配置為以JSON格式的字串發送或接收整個消息物件.",
"path2": "這條路徑將相對於 ",
"url1": "URL 應該使用ws:&#47;&#47;或者wss:&#47;&#47;方案並指向現有的websocket監聽器.",
"url2": "預設情況下,<code>payload</code> 將包含要發送或從Websocket接收的資料。可以將使用者端配置為以JSON格式的字串發送或接收整個消息物件."
},
"errors": {
"connect-error": "ws連接發生了錯誤: ",
"send-error": "發送時發生了錯誤: ",
"missing-conf": "未設置伺服器"
}
},
"watch": {
"label": {
"files": "文件",
"recursive": "遞迴所有子資料夾"
},
"placeholder": {
"files": "逗號分開文件或資料夾"
},
"tip": "在Windows上請務必使用雙斜杠 \\\\ 來隔開資料夾名字"
},
"tcpin": {
"label": {
"type": "類型",
"output": "輸出",
"port": "埠",
"host": "主機位址",
"payload": "的有效載荷",
"delimited": "分隔符號號",
"close-connection": "是否在成功發送每條資訊後斷開連接?",
"decode-base64": "用 Base64 解碼信息?",
"server": "伺服器",
"return": "返回",
"ms": "毫秒",
"chars": "字元"
},
"type": {
"listen": "監聽",
"connect": "連接",
"reply": "回應 TCP"
},
"output": {
"stream": "字串流",
"single": "單一",
"buffer": "Buffer",
"string": "字串",
"base64": "Base64 字串"
},
"return": {
"timeout": "指定時間後",
"character": "當收到某個字元為",
"number": "指定字元數",
"never": "永不 - 保持連接",
"immed": "馬上 - 不需要等待回復"
},
"status": {
"connecting": "正在連接到 __host__:__port__",
"connected": "已經連接到 __host__:__port__",
"listening-port": "監聽埠 __port__",
"stopped-listening": "已停止監聽埠",
"connection-from": "連接來自 __host__:__port__",
"connection-closed": "連接已關閉 __host__:__port__",
"connections": "__count__ 個連接",
"connections_plural": "__count__ 個連接"
},
"errors": {
"connection-lost": "連接中斷 __host__:__port__",
"timeout": "超時關閉通訊端連接,埠 __port__",
"cannot-listen": "無法監聽埠 __port__, 錯誤: __error__",
"error": "錯誤: __error__",
"socket-error": "通訊端連接錯誤來自 __host__:__port__",
"no-host": "主機位址或埠未設定",
"connect-timeout": "連接逾時",
"connect-fail": "連接失敗"
}
},
"udp": {
"label": {
"listen": "監聽",
"onport": "埠",
"using": "使用",
"output": "輸出",
"group": "組",
"interface": "本地IP",
"interfaceprompt": "(可選)本地 IP 綁定到",
"send": "發送一個",
"toport": "到埠",
"address": "地址",
"decode-base64": "是否解碼Base64編碼的資訊?"
},
"placeholder": {
"interface": "可選eth0的IP地址",
"address": "目標IP位址"
},
"udpmsgs": "udp信息",
"mcmsgs": "群播信息",
"udpmsg": "udp信息",
"bcmsg": "廣播資訊",
"mcmsg": "群播信息",
"output": {
"buffer": "Buffer",
"string": "字串",
"base64": "Base64編碼字串"
},
"bind": {
"random": "綁定到任意本地埠",
"local": "綁定到本地埠",
"target": "綁定到目標埠"
},
"tip": {
"in": "提示:確保您的防火牆將允許資料進入",
"out": "提示:如果要使用<code>msg.ip</code>和<code>msg.port</code>設置,請將位址和埠留空",
"port": "正在使用埠: "
},
"status": {
"listener-at": "udp 監聽器正在監聽 __host__:__port__",
"mc-group": "udp 群播到 __group__",
"listener-stopped": "udp 監聽器已停止",
"output-stopped": "udp 輸出已停止",
"mc-ready": "udp 群播已準備好: __outport__ -> __host__:__port__",
"bc-ready": "udp 廣播已準備好: __outport__ -> __host__:__port__",
"ready": "udp 已準備好: __outport__ -> __host__:__port__",
"ready-nolocal": "udp 已準備好: __host__:__port__",
"re-use": "udp 重用通訊端: __outport__ -> __host__:__port__"
},
"errors": {
"access-error": "UDP 訪問錯誤, 你可能需要root許可權才能接入1024以下的埠",
"error": "錯誤: __error__",
"bad-mcaddress": "無效的群播地址",
"interface": "必須是指定介面的IP位址",
"ip-notset": "udp: IP地址未設定",
"port-notset": "udp: 埠未設定",
"port-invalid": "udp: 無效埠號碼",
"alreadyused": "udp: 埠已被佔用"
}
},
"switch": {
"label": {
"property": "屬性",
"rule": "規則",
"repair" : "重建資訊佇列"
},
"and": "與",
"checkall": "全選所有規則",
"stopfirst": "接受第一條匹配資訊後停止",
"ignorecase": "忽略大小寫",
"rules": {
"btwn":"在之間",
"cont":"包含",
"regex":"匹配規則運算式",
"true":"為真",
"false":"為假",
"null":"為空",
"nnull":"非空",
"head":"head",
"tail":"tail",
"index":"index between",
"exp":"JSONata運算式",
"else":"除此以外"
},
"errors": {
"invalid-expr": "無效的JSONata運算式: __error__",
"too-many" : "Switch節點中有太多待定信息"
}
},
"change": {
"label": {
"rules": "規則",
"rule": "規則",
"set": "設定 __property__",
"change": "修改 __property__",
"delete": "刪除 __property__",
"move": "移動 __property__",
"changeCount": "修改: __count__條規矩",
"regex": "使用規則運算式"
},
"action": {
"set": "設定",
"change": "修改",
"delete": "刪除",
"move": "轉移",
"to": "到",
"search": "搜索",
"replace": "替代為"
},
"errors": {
"invalid-from": "無效的'from'屬性: __error__",
"invalid-json": "無效的'to'JSON 屬性",
"invalid-expr": "無效的JSONata運算式: __error__"
}
},
"range": {
"label": {
"action": "操作",
"inputrange": "映射輸入資料",
"resultrange": "至目標範圍",
"from": "從",
"to": "到",
"roundresult": "取最接近整數?"
},
"placeholder": {
"min": "e.g. 0",
"maxin": "e.g. 99",
"maxout": "e.g. 255"
},
"scale": {
"payload": "按比例msg.payload",
"limit": "按比例並設定界限至目標範圍",
"wrap": "按比例並包含在目標範圍內"
},
"tip": "提示: 此節點僅對數字有效",
"errors": {
"notnumber": "不是一個數字"
}
},
"csv": {
"label": {
"columns": "列",
"separator": "分隔符號",
"c2o": "CSV至對象",
"o2c": "對象至CSV",
"input": "輸入",
"skip-s": "忽略前",
"skip-e": "行",
"firstrow": "第一行包含列名",
"output": "輸出",
"includerow": "包含列名行",
"newline": "分行符號"
},
"placeholder": {
"columns": "用逗號分割列名"
},
"separator": {
"comma": "逗號",
"tab": "Tab",
"space": "空格",
"semicolon": "分號",
"colon": "冒號",
"hashtag": "井號",
"other": "其他..."
},
"output": {
"row": "每行一條信息",
"array": "僅一條資訊 [陣列]"
},
"newline": {
"linux": "Linux (\\n)",
"mac": "Mac (\\r)",
"windows": "Windows (\\r\\n)"
},
"errors": {
"csv_js": "此節點僅處理CSV字串或JS物件",
"obj_csv": "對象->CSV轉換未設定列模版"
}
},
"html": {
"label": {
"select": "選取項",
"output": "輸出"
},
"output": {
"html": "選定元素的html內容",
"text": "選定元素的純文字內容",
"attr": "包含選定元素的所有屬性的物件"
},
"format": {
"single": "一條資訊 [陣列]",
"multi": "多條資訊,每條一個元素"
}
},
"json": {
"errors": {
"dropped-object": "忽略非物件格式的有效負載",
"dropped": "忽略不支援格式的有效負載類型",
"dropped-error": "轉換有效負載失敗"
},
"label": {
"o2j": "對象至JSON",
"pretty": "格式化JSON字串",
"action": "操作",
"property": "屬性",
"actions": {
"toggle": "JSON字串與物件互轉",
"str":"總是轉為JSON字串",
"obj":"總是轉為JS對象"
}
}
},
"yaml": {
"errors": {
"dropped-object": "忽略非物件格式的有效負載",
"dropped": "忽略不支援格式的有效負載類型",
"dropped-error": "轉換有效負載失敗"
}
},
"xml": {
"label": {
"represent": "XML標籤屬性的屬性名稱",
"prefix": "標籤文本內容的屬性名稱",
"advanced": "高級選項",
"x2o": "XML到物件選項"
},
"errors": {
"xml_js": "此節點僅處理XML字串或JS物件."
}
},
"rpi-gpio": {
"label": {
"gpiopin": "GPIO",
"selectpin": "選擇引腳",
"resistor": "電阻?",
"readinitial": "在部署/重啟時讀取引腳的初始狀態?",
"type": "類型",
"initpin": "初始化引腳狀態?",
"debounce": "去抖動",
"freq": "頻率",
"button": "按鈕",
"pimouse": "Pi滑鼠",
"pikeyboard": "Pi鍵盤",
"left": "左",
"right": "右",
"middle": "中"
},
"resistor": {
"none": "無",
"pullup": "上拉電阻",
"pulldown": "下拉電阻"
},
"digout": "數位輸出",
"pwmout": "PWM輸出",
"servo": "伺服輸出",
"initpin0": "初始引腳電平 - 低(0)",
"initpin1": "初始引腳電平 - 高(1)",
"left": "左",
"right": "右",
"middle": "中",
"any": "任何",
"pinname": "引腳",
"alreadyuse": "已被使用",
"alreadyset": "已被設為",
"tip": {
"pin": "<b>正在使用引腳</b>: ",
"in": "提示: 僅接受數位輸入 - 輸出必須為0或1.",
"dig": "提示: 如用數位輸出 - 輸入必須為0或1.",
"pwm": "提示: 如用PWM輸出 - 輸入必須為0至100之間; 如用高頻率可能會比預期佔用更多CPU資源.",
"ser": "<b>提示</b>: 如用伺服輸出 - 輸入必須為0至100之間. 50為中間值."
},
"types": {
"digout": "數位輸出",
"input": "輸入",
"pullup": "含有上拉電阻的輸入",
"pulldown": "含有下拉電阻的輸入",
"pwmout": "PWM輸出",
"servo": "伺服輸出"
},
"status": {
"stopped": "已停止",
"closed": "已關閉",
"not-running": "不運行"
},
"errors": {
"ignorenode": "忽略樹莓派的特定節點",
"version": "版本命令失敗",
"sawpitype": "查看Pi類型",
"libnotfound": "找不到樹莓派RPi.GPIO的python庫",
"alreadyset": "GPIO引腳 __pin__ 已經被設定為類型: __type__",
"invalidpin": "無效GPIO引腳",
"invalidinput": "無效輸入",
"needtobeexecutable": "__command__須為可運行命令",
"mustbeexecutable": "nrgpio須為可運行",
"commandnotfound": "nrgpio命令不存在",
"commandnotexecutable": "nrgpio命令不可運行",
"error": "錯誤: __error__",
"pythoncommandnotfound": "nrpgio python命令未處於運行狀態"
}
},
"file": {
"label": {
"filename": "檔案名",
"action": "行為",
"addnewline": "向每個有效載荷添加分行符號(\\n?",
"createdir": "創建目錄(如果不存在)?",
"outputas": "輸出",
"breakchunks": "分拆成塊",
"breaklines": "分拆成行",
"filelabel": "文件",
"sendError": "發生錯誤時發送消息(傳統模式)",
"deletelabel": "刪除 __file__"
},
"action": {
"append": "追加至文件",
"overwrite": "複寫文件",
"delete": "刪除檔"
},
"output": {
"utf8": "一個utf8字串",
"buffer": "一個Buffer物件",
"lines": "每行一條信息",
"stream": "一個Buffer流"
},
"status": {
"wrotefile": "寫入至文件: __file__",
"deletedfile": "刪除檔: __file__",
"appendedfile": "追加至文件: __file__"
},
"errors": {
"nofilename": "未指定檔案名",
"invaliddelete": "警告:無效刪除。請在配置對話方塊中使用特定的刪除選項",
"deletefail": "無法刪除檔: __error__",
"writefail": "無法寫入文件: __error__",
"appendfail": "無法追加到文件: __error__",
"createfail": "檔創建失敗: __error__"
},
"tip": "提示: 檔案名應該是絕對路徑否則它將相對於Node-RED進程的工作目錄。"
},
"split": {
"intro":"基於以下類型拆分<code>msg.payload</code>:",
"object":"<b>對象</b>",
"objectSend":"每個鍵值對作為單個消息發送",
"strBuff":"<b>字串</b> / <b>Buffer</b>",
"array":"<b>陣列</b>",
"splitUsing":"拆分使用",
"splitLength":"固定長度",
"stream":"作為消息流處理",
"addname":" 複製鍵到 "
},
"join":{
"mode":{
"mode":"模式",
"auto":"自動",
"merge":"合併序列",
"reduce":"縮減序列",
"custom":"手動"
},
"combine":"合併每個",
"create":"輸出為",
"type":{
"string":"字串",
"array":"陣列",
"buffer":"Buffer",
"object":"鍵值對對象",
"merged":"合併對象"
},
"using":"使用此值",
"key":"作為鍵",
"joinedUsing":"合併符號",
"send":"發送資訊:",
"afterCount":"達到一定數量的資訊時",
"count":"數量",
"subsequent":"和每個後續的消息",
"afterTimeout":"第一條消息的若干時間後",
"seconds":"秒",
"complete":"在收到存在<code>msg.complete</code>的消息後",
"tip":"此模式假定此節點與<i>split</i>相連, 或者接收到的消息有正確配置的<code>msg.parts</code>屬性.",
"too-many" : "join節點中有太多待定信息",
"merge": {
"topics-label":"合併主題",
"topics":"主題",
"topic" : "主題",
"on-change":"當收到一個新主題時發送已合併資訊"
},
"reduce": {
"exp": "Reduce運算式",
"exp-value": "exp",
"init": "初始值",
"right": "反向求值(從後往前)",
"fixup": "Fix-up exp"
},
"errors": {
"invalid-expr": "無效的JSONata運算式: __error__"
}
},
"sort" : {
"target" : "排序屬性",
"seq" : "資訊佇列",
"key" : "鍵值",
"elem" : "元素值",
"order" : "順序",
"ascending" : "昇冪",
"descending" : "降冪",
"as-number" : "作為數值",
"invalid-exp" : "sort節點中存在無效的JSONata運算式",
"too-many" : "sort節點中有太多待定信息",
"clear" : "清空sort節點中的待定資訊"
},
"batch" : {
"mode": {
"label" : "模式",
"num-msgs" : "按指定數量分組",
"interval" : "按時間間隔分組",
"concat" : "按主題分組"
},
"count": {
"label" : "分組數量",
"overlap" : "隊末隊首重疊數量",
"count" : "數量",
"invalid" : "無效的分組數量或重疊數量"
},
"interval": {
"label" : "時間間隔",
"seconds" : "秒",
"empty" : "無數據到達時發送空資訊"
},
"concat": {
"topics-label": "主題",
"topic" : "主題"
},
"too-many" : "batch節點中有太多待定信息",
"unexpected" : "未知模式",
"no-parts" : "資訊中沒有parts屬性"
}
}