1
0
mirror of https://github.com/node-red/node-red.git synced 2023-10-10 13:36:53 +02:00

added chinese messages.json locale file (#1452)

* modified the wording in the chinese editor.json 

change the wording closer to their meanings in chinese

* added chinese messages.json
This commit is contained in:
jmikerq 2017-10-23 02:55:26 -07:00 committed by Nick O'Leary
parent 40146dedaf
commit dba6ff1d51
2 changed files with 851 additions and 5 deletions

View File

@ -0,0 +1,846 @@
{
"common": {
"label": {
"payload": "内容",
"topic": "主题",
"name": "名称",
"username": "用户名",
"password": "密码"
},
"status": {
"connected": "已连接",
"not-connected": "未连接",
"disconnected": "已断开",
"connecting": "连接中",
"error": "错误",
"ok": "确认"
},
"notification": {
"error": "<strong>错误</strong>: __message__",
"errors": {
"not-deployed": "节点未部署",
"no-response": "服务器无反应",
"unexpected": "发生意外错误 (__status__) __message__"
}
},
"errors": {
"nooverride": "警告: 信息的属性已经不可以改写节点的属性. 详情参考 bit.ly/nr-override-msg-props"
}
},
"inject": {
"inject": "注入",
"repeat": "重复 = __repeat__",
"crontab": "crontab = __crontab__",
"stopped": "停止",
"failed": "注入失败: __error__",
"label": {
"repeat": "重复"
},
"timestamp": "时间戳",
"none": "空白",
"interval": "间隔",
"interval-time": "特定时间内间隔",
"time": "特定时间",
"seconds": "秒",
"minutes": "分钟",
"hours": "小时",
"between": "介于",
"previous": "之前数值",
"at": "在",
"and": "之间",
"every": "每个",
"days": [
"星期一",
"星期二",
"星期三",
"星期四",
"星期五",
"星期六",
"星期天"
],
"on": "在",
"onstart": "运行时注入?",
"tip": "<b>注意:</b> \"特定时间内间隔\" 和 \"特定时间\" 会用cron系统.<br/> 详情擦看信息页.",
"success": "成功注入: __label__",
"errors": {
"failed": "注入失败, 请查看日志"
}
},
"catch": {
"catch": "检测异常",
"catchNodes": "检测到 (__number__)",
"label": {
"source": "检测错误来自",
"node": "节点",
"type": "类型",
"selectAll": "全选",
"sortByLabel": "按名称排序",
"sortByType": "按类型排序"
},
"scope": {
"all": "所有节点",
"selected": "已选节点"
}
},
"status": {
"status": "状态 (所有)",
"statusNodes": "状态显示 (__number__)",
"label": {
"source": "状态报告来自",
"node": "节点",
"type": "类型",
"selectAll": "全选",
"sortByLabel": "按名称排序",
"sortByType": "按类型排序"
},
"scope": {
"all": "所有节点",
"selected": "已选节点"
}
},
"debug": {
"output": "输出",
"msgprop": "信息属性",
"msgobj": "完整信息",
"to": "目标",
"debtab": "调试窗口",
"tabcon": "调试窗口及终端控制台",
"notification": {
"activated": "成功激活: __label__",
"deactivated": "成功取消: __label__"
},
"sidebar": {
"label": "调试窗口",
"name": "名称",
"filterAll": "所有节点",
"filterSelected": "已选节点",
"filterCurrent": "目前流程",
"debugNodes": "调试节点",
"clearLog": "清理日志",
"openWindow": "在新窗口打开"
},
"messageMenu": {
"collapseAll": "折叠所有路径",
"clearPinned": "清理已固定路径",
"filterNode": "过滤此节点",
"clearFilter": "清除已设过滤"
}
},
"link": {
"linkIn": "连接入口",
"linkOut": "连接出口",
"label": {
"event": "事件名称",
"node": "节点名称",
"type": "流程",
"sortByFlow":"根据流程排序",
"sortByLabel": "根据名称排序"
}
},
"tls": {
"tls": "TLS设置",
"label": {
"use-local-files": "使用本地密匙及证书文件",
"upload": "上传",
"cert": "证书",
"key": "私钥",
"ca": "CA证书",
"verify-server-cert":"验证服务器证书"
},
"placeholder": {
"cert":"证书路径 (PEM 格式)",
"key":"私匙路径 (PEM 格式)",
"ca":"CA证书路径 (PEM 格式)"
},
"error": {
"missing-file": "无证书/密匙文件提供"
}
},
"exec": {
"label": {
"command": "命令",
"append": "追加",
"timeout": "超时",
"timeoutplace": "可选填",
"return": "输出",
"seconds": "秒"
},
"placeholder": {
"extraparams": "额外的输入参数"
},
"opt": {
"exec": "当命令任务完成时 - exec 模式",
"spawn": "当命令任务进行时 - spawn 模式"
},
"oldrc": "使用旧式输出模式 (传统模式)"
},
"function": {
"label": {
"function": "函数",
"outputs": "输出"
},
"error": {
"inputListener":"无法在函数里面加入对‘注入’事件的监视",
"non-message-returned":"函数节点尝试返回类型为 __type__ 的信息"
},
"tip": "可从信息页面查看更多关于如何编写函数的帮助"
},
"template": {
"label": {
"template": "模版",
"property": "设定属性",
"format": "语法高亮",
"syntax": "格式",
"output": "输出为",
"mustache": "Mustache 模版",
"plain": "纯文本",
"json": "解析JSON",
"none": "无"
},
"templatevalue": "This is the payload: {{payload}} !"
},
"delay": {
"action": "行为设置",
"for": "时长",
"delaymsg": "延迟每一条信息",
"delayfixed": "固定延迟时间",
"delayvarmsg": "用 msg.delay 改写延迟时长",
"randomdelay": "随机延迟",
"limitrate": "信息速度限制",
"limitall": "所有信息",
"limittopic": "每一个 msg.topic",
"fairqueue": "轮流发每一个主题",
"timedqueue": "发所有主题",
"milisecs": "毫秒",
"secs": "秒",
"sec": "秒",
"mins": "分",
"min": "分",
"hours": "小时",
"hour": "小时",
"days": "日",
"day": "日",
"between": "介于",
"and": "和",
"rate": "速度",
"msgper": "信息 每",
"dropmsg": "不传输中间信息",
"label": {
"delay": "延迟",
"variable": "变量",
"limit": "限制",
"limitTopic": "限制主题",
"random": "随机",
"units" : {
"second": {
"plural" : "秒",
"singular": "秒"
},
"minute": {
"plural" : "分钟",
"singular": "分钟"
},
"hour": {
"plural" : "小时",
"singular": "小时"
},
"day": {
"plural" : "日",
"singular": "日"
}
}
},
"error": {
"buffer": "缓冲超过了 1000 条信息",
"buffer1": "缓冲超过了 10000 条信息"
}
},
"trigger": {
"send": "发送",
"then": "然后",
"then-send": "然后发送",
"output": {
"string": "字符串",
"number": "数字",
"existing": "现有信息对象",
"original": "原本信息对象",
"latest": "最新信息对象",
"nothing": "无"
},
"wait-reset": "等待至重置",
"wait-for": "等待",
"wait-loop": "重发每",
"duration": {
"ms": "毫秒",
"s": "秒",
"m": "分钟",
"h": "小时"
},
"extend": " 如有新信息,延长延迟",
"label": {
"trigger": "触发",
"trigger-block": "出发并阻止",
"trigger-loop": "重发每",
"reset": "重置触发节点条件 如果:",
"resetMessage":"msg.reset 已设置",
"resetPayload":"msg.payload 等于",
"resetprompt": "可选填"
}
},
"comment": {
"label": {
"title": "标题",
"body": "主体"
},
"tip": "提示: 主题内容可以添加格式化为 <a href=\"https://help.github.com/articles/markdown-basics/\" target=\"_blank\">Github 风格 Markdown</a>"
},
"unknown": {
"label": {
"unknown": "未知"
},
"tip": "<p>此节点是您安装但Node-RED所不知道的类型。</p><p><i>如果在此状态下部署节点,那么它的配置将被保留,但是流程将不会启动,直到安装缺少的类型。</i></p><p>有关更多帮助,请参阅信息侧栏</p>"
},
"mqtt": {
"label": {
"broker": "服务端",
"example": "e.g. localhost",
"qos": "QoS",
"clientid": "客户端ID",
"port": "端口",
"keepalive": "存货定时器(秒)",
"cleansession": "使用新的会话",
"use-tls": "使用安全连接 (SSL/TLS)",
"tls-config":"TLS 设置",
"verify-server-cert":"验证服务器证书",
"compatmode": "使用旧式 MQTT 3.1 支持"
},
"tabs-label": {
"connection": "连接",
"security": "安全",
"will": "终结信息",
"birth": "初始信息"
},
"placeholder": {
"clientid": "留空白将会自动生成",
"clientid-nonclean":"如非新会话必须设置客户端ID",
"will-topic": "留空白将禁止终止信息",
"birth-topic": "留空白将禁止初始信息"
},
"state": {
"connected": "已连接到服务端: __broker__",
"disconnected": "已断开与服务端 __broker__ 的链接",
"connect-failed": "与服务端 __broker__ 的连接失败"
},
"retain": "保留",
"true": "是",
"false": "否",
"tip": "提示: 如果你想用msg属性来设置主题qos 或者是否保存,请将这几个区域留空",
"errors": {
"not-defined": "主题未设置",
"missing-config": "未设置服务端",
"invalid-topic": "主题无效",
"nonclean-missingclientid": "客户端ID未设定使用新会话"
}
},
"httpin": {
"label": {
"method": "方法",
"url": "URL",
"doc": "文档",
"return": "返回",
"upload": "接受文件上传?",
"status": "状态码",
"headers": "头子段",
"other": "其他"
},
"setby": "- 用 msg.method 设定 -",
"basicauth": "基本认证",
"use-tls": "使用安全连接 (SSL/TLS) ",
"tls-config":"TLS 设置",
"utf8": "UTF-8 字符串",
"binary": "二进制缓冲模块",
"json": "解析JSON对象",
"tip": {
"in": "相对URL",
"res": "发送到此节点的消息<b>必须</b>来自 <i>http input</i> 节点",
"req": "提示如果JSON解析失败则获取的字符串将按原样返回."
},
"httpreq": "http 请求",
"errors": {
"not-created": "当httpNodeRoot为否时无法创建 http-in 节点",
"missing-path": "无路径",
"no-response": "无响应对象",
"json-error": "JSON 解析错误",
"no-url": "未设定 URL",
"deprecated-call":"__method__ 方法已弃用",
"invalid-transport":"非HTTP传输请求"
},
"status": {
"requesting": "请求中"
}
},
"websocket": {
"label": {
"type": "类型",
"path": "路径",
"url": "URL"
},
"listenon": "监听",
"connectto": "连接",
"payload": "发送/接受 有效载荷",
"message": "发送/接受 完整信息",
"tip": {
"path1": "默认情况下,<code> payload </code>将包含要发送或从Websocket接收的数据。侦听器可以配置为以JSON格式的字符串发送或接收整个消息对象.",
"path2": "这条路径将相对于 ",
"url1": "URL 应该使用 ws:&#47;&#47; 或者 wss:&#47;&#47; 方案并指向现有的websocket侦听器.",
"url2": "默认情况下,<code> payload </code>将包含要发送或从Websocket接收的数据。可以将客户端配置为以JSON格式的字符串发送或接收整个消息对象."
},
"errors": {
"connect-error": "ws连接发生了错误: ",
"send-error": "发送时发生了错误: ",
"missing-conf": "未设置服务器"
}
},
"watch": {
"label": {
"files": "文件(s)",
"recursive": "递归查看文件夹"
},
"placeholder": {
"files": "逗号分开文件或文件夹"
},
"tip": "在Windows上请务必使用双斜杠 \\\\ 来隔开文件夹名字"
},
"tcpin": {
"label": {
"type": "类型",
"output": "输出",
"port": "端口",
"host": "主服务器",
"payload": "有效载荷(s)",
"delimited": "分隔符号",
"close-connection": "是否在成功发送每条信息后断开连接?",
"decode-base64": "用 Base64 解码信息?",
"server": "服务器",
"return": "返回",
"ms": "毫秒",
"chars": "字符"
},
"type": {
"listen": "监听",
"connect": "连接",
"reply": "回应到 TCP"
},
"output": {
"stream": "字串流",
"single": "单一",
"buffer": "缓冲模块",
"string": "字符串",
"base64": "Base64 字符串"
},
"return": {
"timeout": "在固定时间超时后",
"character": "当收到某个字符时",
"number": "固定数目的字符",
"never": "永不 - 保持连接",
"immed": "马上 - 不需要等待回复"
},
"status": {
"connecting": "正在连接到 __host__:__port__",
"connected": "已经连接到 __host__:__port__",
"listening-port": "监听端口 __port__",
"stopped-listening": "已停止监听端口",
"connection-from": "连接来自 __host__:__port__",
"connection-closed": "连接已关闭 __host__:__port__",
"connections": "__count__ 段连接",
"connections_plural": "__count__ 段连接"
},
"errors": {
"connection-lost": "连接中断 __host__:__port__",
"timeout": "超时关闭套接字连接,端口 __port__",
"cannot-listen": "无法监听端口 __port__, 错误: __error__",
"error": "错误: __error__",
"socket-error": "套接字连接错误来自 __host__:__port__",
"no-host": "主服务器和/或者端口未设定",
"connect-timeout": "连接超时",
"connect-fail": "连接失败"
}
},
"udp": {
"label": {
"listen": "监听",
"onport": "端口",
"using": "使用",
"output": "输出",
"group": "组",
"interface": "本地IP",
"interfaceprompt": "(可选填)本地 IP 绑定到",
"send": "发送一个",
"toport": "到端口",
"address": "地址",
"decode-base64": "是否解码编码为Base64的信息?"
},
"placeholder": {
"interface": "可选填eth0 的 ip 地址",
"address": "目的地 ip 地址"
},
"udpmsgs": "udp 信息",
"mcmsgs": "组播信息",
"udpmsg": "udp 信息",
"bcmsg": "广播信息",
"mcmsg": "组播信息",
"output": {
"buffer": "缓冲模块",
"string": "字符串",
"base64": "Base64编码字符串"
},
"bind": {
"random": "绑定到任意本地端口",
"local": "绑定到本地端口",
"target": "绑定到目标端口"
},
"tip": {
"in": "提示:确保您的防火墙将允许数据进入",
"out": "提示:如果要使用<code> msg.ip </code>和<code> msg.port </code>设置,请将地址和端口留空",
"port": "端口已在使用: "
},
"status": {
"listener-at": "udp 监听器正在监听 __host__:__port__",
"mc-group": "udp 组播到 __group__",
"listener-stopped": "udp 监听器已停止",
"output-stopped": "udp 输出已停止",
"mc-ready": "udp 组播已准备好: __outport__ -> __host__:__port__",
"bc-ready": "udp 广播已准备好: __outport__ -> __host__:__port__",
"ready": "udp 已准备好: __outport__ -> __host__:__port__",
"ready-nolocal": "udp 已准备好: __host__:__port__"
},
"errors": {
"access-error": "UDP 访问错误, 你可能需要root权限才能接入1024以下的端口",
"error": "错误: __error__",
"bad-mcaddress": "无效的组播地址",
"interface": "必须是需要接口的 ip 地址",
"ip-notset": "udp: ip 地址未设定",
"port-notset": "udp: 端口未设定",
"port-invalid": "udp: 无效端口号码",
"alreadyused": "udp: 端口已经在使用"
}
},
"switch": {
"label": {
"property": "属性",
"rule": "规矩"
},
"and": "和",
"checkall": "全选所有规则",
"stopfirst": "接受第一条匹配信息后停止",
"ignorecase": "忽视大小写",
"rules": {
"btwn":"在之间",
"cont":"包含",
"regex":"匹配正则表达式",
"true":"为真",
"false":"为假",
"null":"为空值",
"nnull":"非空值",
"else":"除此以外"
},
"errors": {
"invalid-expr": "无效 JSONata 表达: __error__"
}
},
"change": {
"label": {
"rules": "规矩",
"rule": "规矩",
"set": "设定 __property__",
"change": "改变 __property__",
"delete": "删除 __property__",
"move": "移动 __property__",
"changeCount": "改变: __count__ 条规矩",
"regex": "用正则表达式"
},
"action": {
"set": "设定",
"change": "更改",
"delete": "删除",
"move": "转移",
"to": "到",
"search": "搜索",
"replace": "更改为"
},
"errors": {
"invalid-from": "无效来源 from 属性: __error__",
"invalid-json": "无效 to 属性",
"invalid-expr": "无效 JSONata 表示: __error__"
}
},
"range": {
"label": {
"action": "行为作用",
"inputrange": "映射输入数据范围",
"resultrange": "至目标范围",
"from": "从",
"to": "到",
"roundresult": "取最接近整数?"
},
"placeholder": {
"min": "e.g. 0",
"maxin": "e.g. 99",
"maxout": "e.g. 255"
},
"scale": {
"payload": "按比例 msg.payload",
"limit": "按比例并设定界限至目标范围",
"wrap": "按比例并包含在目标范围内"
},
"tip": "提示: 此节点仅对数字有效",
"errors": {
"notnumber": "不是一个数"
}
},
"csv": {
"label": {
"columns": "列",
"separator": "分隔符号",
"c2o": "CSV 至对象选项",
"o2c": "对象至 to CSV 选项",
"input": "输入",
"firstrow": "第一行包含列名",
"output": "输出",
"includerow": "包含列名行",
"newline": "新的一行"
},
"placeholder": {
"columns": "用逗号分割列名"
},
"separator": {
"comma": "逗号",
"tab": "Tab",
"space": "空格",
"semicolon": "分号",
"colon": "冒号",
"hashtag": "井号",
"other": "其他..."
},
"output": {
"row": "每行包含一条信息",
"array": "一条单独信息 [数组]"
},
"newline": {
"linux": "Linux (\\n)",
"mac": "Mac (\\r)",
"windows": "Windows (\\r\\n)"
},
"errors": {
"csv_js": "此节点仅处理 CSV 字符串或 js 对象",
"obj_csv": "对象 -> CSV 转换未设定列模版"
}
},
"html": {
"label": {
"select": "选取项",
"output": "输出"
},
"output": {
"html": "选定元素的 html 内容",
"text": "选定元素的纯文本内容",
"attr": "选定元素的所有属性对象"
},
"format": {
"single": "由一个单独信息包含一个数组",
"multi": "由多条信息,每一条包含一个元素"
}
},
"json": {
"errors": {
"dropped-object": "忽略非对象格式的有效负载",
"dropped": "忽略不支持格式的有效负载类型",
"dropped-error": "转换有效负载失败"
},
"label": {
"o2j": "对象至 JSON 选项",
"pretty": "格式化 JSON 字符串"
}
},
"yaml": {
"errors": {
"dropped-object": "忽略非对象格式的有效负载",
"dropped": "忽略不支持格式的有效负载类型",
"dropped-error": "转换有效负载失败"
}
},
"xml": {
"label": {
"represent": "XML标签属性的属性名称",
"prefix": "标签文本内容的属性名称",
"advanced": "高级选项",
"x2o": "XML到对象选项"
},
"errors": {
"xml_js": "此节点仅处理XML字符串或JS对象."
}
},
"rpi-gpio": {
"label": {
"gpiopin": "GPIO",
"selectpin": "选择引脚",
"resistor": "电阻?",
"readinitial": "在部署/重新启动时读取引脚的初始状态?",
"type": "类型",
"initpin": "初始化引脚状态?",
"debounce": "去抖动",
"freq": "频率",
"button": "按钮",
"pimouse": "Pi 鼠标",
"pikeyboard": "Pi 键盘",
"left": "左",
"right": "右",
"middle": "中"
},
"resistor": {
"none": "无",
"pullup": "上拉电阻",
"pulldown": "下拉电阻"
},
"digout": "数字输出",
"pwmout": "PWM 输出",
"servo": "伺服输出",
"initpin0": "初始引脚电平 - 低 (0)",
"initpin1": "初始引脚电平 - 高 (1)",
"left": "左",
"right": "右",
"middle": "中",
"any": "任何",
"pinname": "引脚",
"alreadyuse": "已经在用",
"alreadyset": "已经设定为",
"tip": {
"pin": "<b>引脚在使用</b>: ",
"in": "提示: 仅接受数字输入 - 输出必须为 0 或 1.",
"dig": "提示: 如用数字输出 - 输入必须为 0 或 1.",
"pwm": "提示: 如用PWM输出 - 输入必须为0至100之间; 如用高频率可能会比预期占用更多CPU资源.",
"ser": "<b>提示</b>: 如用伺服输出 - 输入必须为0至100之间. 50为中间值."
},
"types": {
"digout": "数字输出",
"input": "输入",
"pullup": "含有上拉电阻的输入",
"pulldown": "含有下拉电阻的输入",
"pwmout": "PWM 输出",
"servo": "伺服输出"
},
"status": {
"stopped": "已停止",
"closed": "已关闭",
"not-running": "不运行"
},
"errors": {
"ignorenode": "忽略树莓派的特定节点",
"version": "版本命令失败",
"sawpitype": "查看Pi类型",
"libnotfound": "找不到树莓派 RPi.GPIO python库",
"alreadyset": "GPIO 引脚 __pin__ 已经被设定为类型: __type__",
"invalidpin": "无效 GPIO 引脚",
"invalidinput": "无效输入",
"needtobeexecutable": "__command__ 需要为可运行命令",
"mustbeexecutable": "nrgpio 需要为可运行",
"commandnotfound": "nrgpio 命令不存在",
"commandnotexecutable": "nrgpio 命令无法运行",
"error": "错误: __error__",
"pythoncommandnotfound": "nrpgio python 命令不运行"
}
},
"tail": {
"label": {
"filename": "文件名",
"type": "文件类型",
"splitlines": "拆分线 \\n?"
},
"action": {
"text": "文本 - 返回字符串",
"binary": "二进制 - 返回缓冲区"
},
"errors": {
"windowsnotsupport": "Windows目前不支持."
}
},
"file": {
"label": {
"filename": "文件名",
"action": "行为",
"addnewline": "向每个有效载荷添加换行符(\\ n?",
"createdir": "创建目录(如果不存在)?",
"outputas": "输出",
"breakchunks": "分拆成块",
"breaklines": "分拆成行",
"filelabel": "文件",
"sendError": "发生错误时发送消息(传统模式)",
"deletelabel": "删除 __file__"
},
"action": {
"append": "追加至文件",
"overwrite": "改写文件",
"delete": "删除文件"
},
"output": {
"utf8": "一条单独 utf8 字符串",
"buffer": "一条单独缓冲区对象",
"lines": "每行一条信息",
"stream": "缓冲区流"
},
"status": {
"wrotefile": "写入至文件: __file__",
"deletedfile": "删除文件: __file__",
"appendedfile": "追加至文件: __file__"
},
"errors": {
"nofilename": "未指定文件名",
"invaliddelete": "警告:无效删除。请在配置对话框中使用特定的删除选项",
"deletefail": "无法删除文件: __error__",
"writefail": "无法写入文件: __error__",
"appendfail": "无法追加到文件: __error__",
"createfail": "文件创建失败: __error__"
},
"tip": "提示: 文件名应该是绝对路径否则它将相对于Node-RED进程的工作目录。"
},
"split": {
"intro":"分裂 <code>msg.payload</code> 基于类型:",
"object":"<b>对象</b>",
"objectSend":"发送每个键/值对的消息",
"strBuff":"<b>字符串</b> / <b>缓冲区</b>",
"array":"<b>数组</b>",
"splitUsing":"拆分使用",
"splitLength":"固定长度",
"stream":"处理为消息流",
"addname":" 复制键到 "
},
"join":{
"mode":{
"mode":"模式",
"auto":"自动",
"custom":"手动"
},
"combine":"结合每一个",
"create":"创建输出",
"type":{
"string":"字符串",
"array":"数组",
"buffer":"缓冲区",
"object":"键/值对象",
"merged":"合并对象"
},
"using":"使用数值",
"key":"当作键",
"joinedUsing":"合并符号",
"send":"发送信息:",
"afterCount":"当达到一定数目的信息部件时",
"count":"数目",
"subsequent":"和每个后续的消息",
"afterTimeout":"第一条消息的超时后",
"seconds":"秒",
"complete":"在使用<code> msg.complete </ code>属性设置的消息后",
"tip":"此模式假定此节点与 <i>split</i> 或者接收到的消息将具有正确配置的 <code>msg.parts</code> 属性."
}
}

View File

@ -2,7 +2,7 @@
"common": { "common": {
"label": { "label": {
"name": "姓名", "name": "姓名",
"ok": "Ok", "ok": "确认",
"done": "完成", "done": "完成",
"cancel": "取消", "cancel": "取消",
"delete": "删除", "delete": "删除",
@ -28,8 +28,8 @@
"menu": { "menu": {
"label": { "label": {
"view": { "view": {
"view": "示", "view": "示",
"showGrid": "示网格", "showGrid": "示网格",
"snapGrid": "对齐网格", "snapGrid": "对齐网格",
"gridSize": "网格尺寸", "gridSize": "网格尺寸",
"textDir": "文本方向", "textDir": "文本方向",
@ -42,7 +42,7 @@
"show": "显示侧边栏" "show": "显示侧边栏"
}, },
"userSettings": "设定", "userSettings": "设定",
"displayStatus": "示节点状态", "displayStatus": "示节点状态",
"displayConfig": "配置节点设定", "displayConfig": "配置节点设定",
"import": "导入", "import": "导入",
"export": "导出", "export": "导出",
@ -381,7 +381,7 @@
"str": "文字列", "str": "文字列",
"num": "数字", "num": "数字",
"re": "正则表达式", "re": "正则表达式",
"bool": "真伪判断", "bool": "布尔",
"json": "JSON", "json": "JSON",
"date": "时间戳" "date": "时间戳"
} }