frodovdr/octonet
1
0
Fork 0
mirror of https://github.com/DigitalDevices/octonet.git synced 2023-10-10 13:36:52 +02:00
Code Issues Releases Wiki Activity
72519606c4
octonet/linux.patch

1708 lines
44 KiB
Diff
Raw Normal View History

fixed EOL on scrips and patch files
2015-08-05 22:23:21 +02:00
diff -uNr linux-3.17.7/arch/arm/mach-at91/at91sam9g45_devices.c linux.octonet/arch/arm/mach-at91/at91sam9g45_devices.c
--- linux-3.17.7/arch/arm/mach-at91/at91sam9g45_devices.c 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/arch/arm/mach-at91/at91sam9g45_devices.c 2014-12-19 01:29:03.337952422 +0100
@@ -304,7 +304,7 @@
},
};
-static struct platform_device at91sam9g45_eth_device = {
+struct platform_device at91sam9g45_eth_device = {
.name = "macb",
.id = -1,
.dev = {
diff -uNr linux-3.17.7/arch/arm/mach-at91/board-octonet.c linux.octonet/arch/arm/mach-at91/board-octonet.c
--- linux-3.17.7/arch/arm/mach-at91/board-octonet.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.octonet/arch/arm/mach-at91/board-octonet.c 2014-12-19 01:29:03.337952422 +0100
@@ -0,0 +1,472 @@
+/*
+ * Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
+ *
+ * Covers: * AT91SAM9G45-EKES board
+ * * AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/atmel-mci.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <net/dsa.h>
+
+#include <linux/platform_data/at91_adc.h>
+
+#include <mach/hardware.h>
+#include <video/atmel_lcdc.h>
+#include <media/soc_camera.h>
+#include <media/atmel-isi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/at91sam9_smc.h>
+#include <mach/system_rev.h>
+
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
+#include "sam9_smc.h"
+#include "generic.h"
+#include "gpio.h"
+
+#include <linux/clk.h>
+#include "clock.h"
+
+#define SCKCR (0xd50)
+
+static void set_alarm(void)
+{
+ void __iomem *r = ioremap(0xfffff000, 0x1000);
+
+ if (!r)
+ return;
+ writel(0x02, r + 0xdcc); /* reset ALARM clock state */
+ iounmap(r);
+}
+
+static void set_slowclock(void)
+{
+ void __iomem *r = ioremap(0xfffff000, 0x1000);
+
+ if (!r)
+ return;
+ //writel(0x02, r + 0xdcc); /* reset ALARM clock state */
+ if (readl(r + SCKCR) == 1) {
+ writel(0x03, r + SCKCR);
+ mdelay(1400);
+ writel(0x0b, r + SCKCR);
+ mdelay(1);
+ writel(0x0a, r + SCKCR);
+ }
+ iounmap(r);
+}
+
+
+static void __init octonet_init_early(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91_initialize(12000000);
+
+ set_alarm();
+}
+
+/*
+ * USB HS Host port (common to OHCI & EHCI)
+ */
+static struct at91_usbh_data __initdata ek_usbh_hs_data = {
+ .ports = 2,
+ .vbus_pin = {-1, -1},
+ .vbus_pin_active_low = {1, 1},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
+};
+
+
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+ .vbus_pin = AT91_PIN_PB19,
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct macb_platform_data __initdata ek_macb_data = {
+ .phy_irq_pin = 0,
+ .is_rmii = 0,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "boot",
+ .offset = 0,
+ .size = 0x100000,
+ },
+ {
+ .name = "linux",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x1f00000,
+ },
+ {
+ .name = "ubi",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC8,
+ .enable_pin = AT91_PIN_PC14,
+ .det_pin = -EINVAL,
+ .ecc_mode = NAND_ECC_SOFT_BCH,
+ .ecc_size = 512,
+ .ecc_bytes = 13,
+ .on_flash_bbt = 1,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
+ .bus_width_16 = 0,
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+static struct resource octonet_dvb_resources[2] = {
+ [0] = {
+ .start = 0x30000000,
+ .end = 0x30000000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static void octonet_dvb_release(struct device *dev)
+{
+
+}
+
+static struct platform_device octonet_dvb_device = {
+ .name = "octonet-dvb",
+ .id = 0,
+ .dev = {
+ .release = octonet_dvb_release,
+ },
+ .resource = octonet_dvb_resources,
+ .num_resources = ARRAY_SIZE(octonet_dvb_resources),
+};
+
+static void __init add_octonet_dvb(void)
+{
+ u32 gpio = AT91_PIN_PC15;
+
+ at91_set_GPIO_periph(gpio, 0);
+ at91_set_gpio_input(gpio, 0);
+ at91_set_deglitch(gpio, 0);
+ octonet_dvb_device.resource[1].start = gpio_to_irq(gpio);
+ octonet_dvb_device.resource[1].end = gpio_to_irq(gpio);
+ platform_device_register(&octonet_dvb_device);
+}
+
+
+static struct gpio_keys_button octonet_buttons[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = AT91_PIN_PC12,
+ .active_low = 1,
+ .desc = "power",
+ .wakeup = 1,
+ .type = EV_KEY,
+ },
+};
+
+static struct gpio_keys_platform_data octonet_button_data = {
+ .buttons = octonet_buttons,
+ .nbuttons = ARRAY_SIZE(octonet_buttons),
+};
+
+static struct platform_device octonet_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &octonet_button_data,
+ }
+};
+
+static void __init octonet_add_buttons(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(octonet_buttons); i++) {
+ at91_set_GPIO_periph(octonet_buttons[i].gpio, 1);
+ at91_set_deglitch(octonet_buttons[i].gpio, 1);
+ }
+ platform_device_register(&octonet_button_device);
+}
+
+
+static struct input_dev *pwr;
+static struct timer_list pwr_timer;
+
+static void pwr_timer_func(unsigned long ptr)
+{
+ input_event(pwr, EV_KEY, KEY_POWER, 1);
+ input_event(pwr, EV_KEY, KEY_POWER, 0);
+ input_sync(pwr);
+}
+
+
+#if 0
+static irqreturn_t pwr_irq(int irq, void *dev_id)
+{
+ u32 val = gpio_get_value(AT91_PIN_PC12);
+ static int sw = 0;
+
+ if (val & 1) {
+ if (del_timer(&pwr_timer)) {
+ sw ^= 1;
+ input_event(pwr, EV_KEY, KEY_PAUSE, sw);
+ input_sync(pwr);
+ }
+ } else {
+ mod_timer(&pwr_timer, jiffies + 3 * HZ);
+ }
+ //input_event(pwr, EV_KEY, KEY_POWER, val ^ 1);
+ //input_sync(pwr);
+ return IRQ_HANDLED;
+}
+#else
+static irqreturn_t pwr_irq(int irq, void *dev_id)
+{
+ u32 val = gpio_get_value(AT91_PIN_PC12);
+ static int sw = 0;
+
+ input_event(pwr, EV_KEY, KEY_POWER, val ^ 1);
+ input_sync(pwr);
+ return IRQ_HANDLED;
+}
+#endif
+
+static void __init add_octonet_button(void)
+{
+ u32 gpio = AT91_PIN_PC12;
+ u32 irq;
+
+ at91_set_GPIO_periph(gpio, 0);
+ at91_set_gpio_input(gpio, 0);
+ at91_set_deglitch(gpio, 0);
+
+ init_timer(&pwr_timer);
+ pwr_timer.function = pwr_timer_func;
+ pwr_timer.data = 0;
+ pwr = input_allocate_device();
+ if (!pwr) {
+ printk("could not allocate input device\n");
+ return;
+ }
+
+ set_bit(EV_KEY, pwr->evbit);
+ set_bit(KEY_POWER, pwr->keybit);
+ set_bit(KEY_PAUSE, pwr->keybit);
+ pwr->name = "octonet_pwr";
+ pwr->phys = "octonet_pwr/input0";
+
+ irq = gpio_to_irq(gpio);
+ request_irq(irq, pwr_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "pwr", NULL);
+
+ input_register_device(pwr);
+}
+
+static struct dsa_chip_data switch_chip_data = {
+ .port_names[0] = "lan1",
+ .port_names[1] = "lan2",
+ .port_names[2] = "lan3",
+ .port_names[3] = "lan4",
+ .port_names[4] = "lan5",
+ .port_names[5] = "cpu",
+ .port_names[6] = "fpga",
+};
+
+static struct dsa_platform_data switch_data = {
+ .nr_chips = 1,
+ .chip = &switch_chip_data,
+};
+
+static struct resource switch_resources[] = {
+ {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device switch_device = {
+ .name = "dsa",
+ .id = 0,
+ .num_resources = 0,
+ .resource = switch_resources,
+ .dev.platform_data = &switch_data,
+};
+
+extern struct platform_device at91sam9g45_eth_device;
+
+static void __init add_switch(void)
+{
+ int i;
+ struct platform_device *pdev = &at91sam9g45_eth_device;
+ struct net_device *netdev = platform_get_drvdata(pdev);
+ struct mii_bus *mii = (struct mii_bus *) dev_get_drvdata(&netdev->dev);
+
+// printk("%08x %08x %08x\n", (u32) pdev, (u32) netdev, (u32) &netdev->dev);
+ switch_data.netdev = &netdev->dev;
+ for (i=0; i<5; i++)
+ switch_data.chip[i].mii_bus = &mii->dev;
+ platform_device_register(&switch_device);
+}
+
+
+
+static void set_pck(void)
+{
+ struct clk *pck0, *mck;
+ int res;
+
+ pck0 = clk_get(NULL, "pck0");
+
+ clk_enable(pck0);
+ return;
+
+
+ mck = clk_get(NULL, "mck");
+ at91_set_A_periph(AT91_PIN_PD26, 0);
+
+ printk("pck=%08x %d, mck=%08x %d\n",
+ (u32) pck0, pck0->type, (u32) mck, mck->type);
+
+ res = clk_set_parent(pck0, mck);
+ printk("set_parent = %d\n", res);
+ //clk_put(mck);
+
+}
+
+#include <mach/at91sam9g45_matrix.h>
+#include <mach/at91_matrix.h>
+
+#undef AT91_SCKCR
+#define AT91_SCKCR (void __iomem *)(0xfffffd50)
+
+static void octonet_init(void)
+{
+ //at91_matrix_write(AT91_MATRIX_EBICSA, 0x0001000a);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+ at91_add_device_serial();
+
+ /* USB HS Host */
+ at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+ at91_add_device_usbh_ehci(&ek_usbh_hs_data);
+ /* USB HS Device */
+ //at91_add_device_usba(&ek_usba_udc_data);
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+
+ at91_set_gpio_input(AT91_PIN_PA19, 0);
+ at91_set_gpio_input(AT91_PIN_PA18, 0);
+
+ at91_matrix_write(AT91_MATRIX_SCFG4, (8<<18)|(2<<16));
+ at91_matrix_write(AT91_MATRIX_PRBS4, 0x00000003);
+ //at91_matrix_write(AT91_MATRIX_SCFG5, (8<<18)|(2<<16));
+ //at91_matrix_write(AT91_MATRIX_PRBS5, 0x00000003);
+ //at91_matrix_write(AT91_MATRIX_VIDEO, AT91C_VDEC_SEL_OFF);
+ ek_add_device_nand();
+ //at91_add_device_i2c(0, NULL, 0);
+ add_octonet_dvb();
+
+ set_pck();
+
+ at91_shdwc_write(AT91_SHDW_MR, 0x30003);
+ //octonet_add_buttons();
+ set_slowclock();
+}
+
+static void octonet_init_late(void)
+{
+ add_switch();
+ add_octonet_button();
+}
+
+MACHINE_START(NAXY400, "DigitalDevices OctopusNet")
+ .init_time = at91sam926x_pit_init,
+ .map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
+ .init_early = octonet_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = octonet_init,
+ .init_late = octonet_init_late,
+MACHINE_END
diff -uNr linux-3.17.7/arch/arm/mach-at91/Kconfig.non_dt linux.octonet/arch/arm/mach-at91/Kconfig.non_dt
--- linux-3.17.7/arch/arm/mach-at91/Kconfig.non_dt 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/arch/arm/mach-at91/Kconfig.non_dt 2014-12-19 01:29:03.337952422 +0100
@@ -319,6 +319,11 @@
families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
<http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
+config MACH_OCTONET
+ bool "OctoNet"
+ help
+ OctoNet
+
endif
# ----------------------------------------------------------
diff -uNr linux-3.17.7/arch/arm/mach-at91/Makefile linux.octonet/arch/arm/mach-at91/Makefile
--- linux-3.17.7/arch/arm/mach-at91/Makefile 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/arch/arm/mach-at91/Makefile 2014-12-19 01:29:05.902083522 +0100
@@ -80,6 +80,7 @@
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
+obj-$(CONFIG_MACH_OCTONET) += board-octonet.o
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
diff -uNr linux-3.17.7/arch/arm/tools/mach-types linux.octonet/arch/arm/tools/mach-types
--- linux-3.17.7/arch/arm/tools/mach-types 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/arch/arm/tools/mach-types 2014-12-19 01:29:06.702124427 +0100
@@ -517,6 +517,7 @@
cm_a510 MACH_CM_A510 CM_A510 3020
tx28 MACH_TX28 TX28 3043
pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062
+naxy400 MACH_NAXY400 NAXY400 3085
vpr200 MACH_VPR200 VPR200 3087
torbreck MACH_TORBRECK TORBRECK 3090
prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
diff -uNr linux-3.17.7/drivers/media/dvb-core/Makefile linux.octonet/drivers/media/dvb-core/Makefile
--- linux-3.17.7/drivers/media/dvb-core/Makefile 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/media/dvb-core/Makefile 2014-12-19 01:29:06.702124427 +0100
@@ -6,6 +6,7 @@
dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \
dvb_ca_en50221.o dvb_frontend.o \
- $(dvb-net-y) dvb_ringbuffer.o dvb_math.o
+ $(dvb-net-y) dvb_ringbuffer.o dvb_math.o \
+ dvb_netstream.o
obj-$(CONFIG_DVB_CORE) += dvb-core.o
diff -uNr linux-3.17.7/drivers/media/dvb-frontends/Kconfig linux.octonet/drivers/media/dvb-frontends/Kconfig
--- linux-3.17.7/drivers/media/dvb-frontends/Kconfig 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/media/dvb-frontends/Kconfig 2014-12-19 01:29:06.702124427 +0100
@@ -35,6 +35,29 @@
help
A Silicon tuner that supports DVB-S and DVB-S2 modes
+config DVB_STV0910
+ tristate "STV0910 based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ DVB-S/S2/DSS Multistandard Professional/Broadcast demodulators.
+ Say Y when you want to support these frontends.
+
+config DVB_MXL5XX
+ tristate "MXL5XX based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ DVB-S/S2/DSS Multistandard Professional/Broadcast demodulators.
+ Say Y when you want to support these frontends.
+
+config DVB_STV6111
+ tristate "STV6111 based tuners"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A Silicon tuner that supports DVB-S and DVB-S2 modes
+
config DVB_M88DS3103
tristate "Montage M88DS3103"
depends on DVB_CORE && I2C && I2C_MUX
@@ -54,6 +77,7 @@
Say Y when you want to support this frontend.
+
config DVB_TDA18271C2DD
tristate "NXP TDA18271C2 silicon tuner"
depends on DVB_CORE && I2C
@@ -406,6 +430,13 @@
help
A DVB-T tuner module. Say Y when you want to support this frontend.
+config DVB_TDA18212DD
+ tristate "Philips TDA18212 based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-T tuner module. Say Y when you want to support this frontend.
+
config DVB_AF9013
tristate "Afatech AF9013 demodulator"
depends on DVB_CORE && I2C
@@ -434,6 +465,20 @@
help
A DVB-T/C tuner module. Say Y when you want to support this frontend.
+config DVB_STV0367DD
+ tristate "ST STV0367dd based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-T/C tuner module. Say Y when you want to support this frontend.
+
+config DVB_CXD2843
+ tristate "Sony CXD2843"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-T/T2/C/C2 tuner module. Say Y when you want to support this frontend.
+
config DVB_CXD2820R
tristate "Sony CXD2820R"
depends on DVB_CORE && I2C
@@ -684,6 +729,13 @@
help
An SEC control chips.
+config DVB_LNBH25
+ tristate "LNBH25 SEC controllers"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ An SEC control chips.
+
config DVB_LNBP22
tristate "LNBP22 SEC controllers"
depends on DVB_CORE && I2C
@@ -773,6 +825,11 @@
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
+config DVB_CXD2099
+ tristate "cxd2099"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+
comment "Tools to develop new frontends"
config DVB_DUMMY_FE
diff -uNr linux-3.17.7/drivers/media/dvb-frontends/Makefile linux.octonet/drivers/media/dvb-frontends/Makefile
--- linux-3.17.7/drivers/media/dvb-frontends/Makefile 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/media/dvb-frontends/Makefile 2014-12-19 01:33:36.799941558 +0100
@@ -113,4 +113,11 @@
obj-$(CONFIG_DVB_RTL2832_SDR) += rtl2832_sdr.o
obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o
obj-$(CONFIG_DVB_AF9033) += af9033.o
-
+obj-$(CONFIG_DVB_STV0367DD) += stv0367dd.o
+obj-$(CONFIG_DVB_TDA18212DD) += tda18212dd.o
+obj-$(CONFIG_DVB_CXD2099) += cxd2099.o
+obj-$(CONFIG_DVB_CXD2843) += cxd2843.o
+obj-$(CONFIG_DVB_STV6111) += stv6111.o
+obj-$(CONFIG_DVB_STV0910) += stv0910.o
+obj-$(CONFIG_DVB_LNBH25) += lnbh25.o
+obj-$(CONFIG_DVB_MXL5XX) += mxl5xx.o
diff -uNr linux-3.17.7/drivers/media/pci/ddbridge/Kconfig linux.octonet/drivers/media/pci/ddbridge/Kconfig
--- linux-3.17.7/drivers/media/pci/ddbridge/Kconfig 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/media/pci/ddbridge/Kconfig 2014-12-19 01:29:06.702124427 +0100
@@ -1,11 +1,16 @@
+
config DVB_DDBRIDGE
tristate "Digital Devices bridge support"
- depends on DVB_CORE && PCI && I2C
+ depends on MEDIA_PCI_SUPPORT && DVB_CORE && PCI && I2C
select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA18212DD if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV0367DD if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CXD2843 if MEDIA_SUBDRV_AUTOSELECT
---help---
Support for cards with the Digital Devices PCI express bridge:
- Octopus PCIe Bridge
@@ -16,3 +21,25 @@
- cineS2(v6)
Say Y if you own such a card and want to use it.
+
+
+config DVB_OCTONET
+ tristate "Digital Devices octonet support"
+ depends on MEDIA_DIGITAL_TV_SUPPORT && DVB_CORE && I2C
+ select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA18212DD if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV0367DD if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CXD2843 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV0910 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV6111 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_LNBH25 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MXL5XX if MEDIA_SUBDRV_AUTOSELECT
+ ---help---
+ Support for OctopusNet
+
+ Say Y if you own such a card and want to use it.
diff -uNr linux-3.17.7/drivers/media/pci/ddbridge/Makefile linux.octonet/drivers/media/pci/ddbridge/Makefile
--- linux-3.17.7/drivers/media/pci/ddbridge/Makefile 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/media/pci/ddbridge/Makefile 2014-12-19 01:29:06.702124427 +0100
@@ -5,10 +5,9 @@
ddbridge-objs := ddbridge-core.o
obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o
+obj-$(CONFIG_DVB_OCTONET) += octonet.o
ccflags-y += -Idrivers/media/dvb-core/
ccflags-y += -Idrivers/media/dvb-frontends/
ccflags-y += -Idrivers/media/tuners/
-# For the staging CI driver cxd2099
-ccflags-y += -Idrivers/staging/media/cxd2099/
diff -uNr linux-3.17.7/drivers/media/pci/Kconfig linux.octonet/drivers/media/pci/Kconfig
--- linux-3.17.7/drivers/media/pci/Kconfig 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/media/pci/Kconfig 2014-12-19 01:29:06.702124427 +0100
@@ -43,8 +43,9 @@
source "drivers/media/pci/pt1/Kconfig"
source "drivers/media/pci/mantis/Kconfig"
source "drivers/media/pci/ngene/Kconfig"
-source "drivers/media/pci/ddbridge/Kconfig"
endif
endif #MEDIA_PCI_SUPPORT
endif #PCI
+
+source "drivers/media/pci/ddbridge/Kconfig"
diff -uNr linux-3.17.7/drivers/mtd/nand/atmel_nand.c linux.octonet/drivers/mtd/nand/atmel_nand.c
--- linux-3.17.7/drivers/mtd/nand/atmel_nand.c 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/mtd/nand/atmel_nand.c 2014-12-19 01:30:14.845609001 +0100
@@ -2099,6 +2099,8 @@
}
nand_chip->ecc.mode = host->board.ecc_mode;
+ nand_chip->ecc.size = host->board.ecc_size;
+ nand_chip->ecc.bytes = host->board.ecc_bytes;
nand_chip->chip_delay = 20; /* 20us command delay time */
if (host->board.bus_width_16) /* 16-bit bus width */
diff -uNr linux-3.17.7/drivers/net/ethernet/cadence/macb.c linux.octonet/drivers/net/ethernet/cadence/macb.c
--- linux-3.17.7/drivers/net/ethernet/cadence/macb.c 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/net/ethernet/cadence/macb.c 2014-12-19 01:29:08.054193557 +0100
@@ -316,6 +316,7 @@
int phy_irq;
int ret;
+#ifndef CONFIG_MACH_OCTONET
phydev = phy_find_first(bp->mii_bus);
if (!phydev) {
netdev_err(dev, "no PHY found\n");
@@ -351,7 +352,7 @@
bp->speed = 0;
bp->duplex = -1;
bp->phy_dev = phydev;
-
+#endif
return 0;
}
@@ -1714,9 +1715,11 @@
/* carrier starts down */
netif_carrier_off(dev);
+#ifndef CONFIG_MACH_OCTONET
/* if the phy is not yet register, retry later*/
if (!bp->phy_dev)
return -EAGAIN;
+#endif
/* RX buffers initialization */
macb_init_rx_buffer_size(bp, bufsz);
@@ -1733,8 +1736,20 @@
bp->macbgem_ops.mog_init_rings(bp);
macb_init_hw(bp);
+#ifdef CONFIG_MACH_OCTONET
+ {
+ u32 reg;
+
+ reg = macb_readl(bp, NCFGR);
+ reg |= MACB_BIT(FD);
+ reg |= MACB_BIT(SPD);
+ macb_writel(bp, NCFGR, reg);
+ }
+ netif_carrier_on(dev);
+#else
/* schedule a link state check */
phy_start(bp->phy_dev);
+#endif
netif_start_queue(dev);
@@ -1936,10 +1951,14 @@
if (!netif_running(dev))
return -EINVAL;
+#ifdef CONFIG_MACH_OCTONET
+ return 0;
+#else
if (!phydev)
return -ENODEV;
return phy_mii_ioctl(phydev, rq, cmd);
+#endif
}
EXPORT_SYMBOL_GPL(macb_ioctl);
@@ -2234,10 +2253,28 @@
macb_is_gem(bp) ? "GEM" : "MACB", dev->base_addr,
dev->irq, dev->dev_addr);
+#ifndef CONFIG_MACH_OCTONET
phydev = bp->phy_dev;
netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+#endif
+#ifdef CONFIG_MACH_OCTONET
+ printk("OctoNet fixed to 100Mbit duplex\n");
+ bp->link = 1;
+ bp->speed = SPEED_100;
+ bp->duplex = DUPLEX_FULL;
+ {
+ u32 reg;
+
+ reg = macb_readl(bp, NCFGR);
+ reg |= MACB_BIT(FD);
+ reg |= MACB_BIT(SPD);
+ macb_writel(bp, NCFGR, reg);
+ }
+ macb_writel(bp, USRIO, MACB_BIT(CLKEN));
+ netif_carrier_on(dev);
+#endif
return 0;
err_out_unregister_netdev:
diff -uNr linux-3.17.7/drivers/staging/media/cxd2099/cxd2099.c linux.octonet/drivers/staging/media/cxd2099/cxd2099.c
--- linux-3.17.7/drivers/staging/media/cxd2099/cxd2099.c 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/staging/media/cxd2099/cxd2099.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,719 +0,0 @@
-/*
- * cxd2099.c: Driver for the CXD2099AR Common Interface Controller
- *
- * Copyright (C) 2010-2011 Digital Devices GmbH
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/i2c.h>
-#include <linux/wait.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include "cxd2099.h"
-
-#define MAX_BUFFER_SIZE 248
-
-struct cxd {
- struct dvb_ca_en50221 en;
-
- struct i2c_adapter *i2c;
- struct cxd2099_cfg cfg;
-
- u8 regs[0x23];
- u8 lastaddress;
- u8 clk_reg_f;
- u8 clk_reg_b;
- int mode;
- int ready;
- int dr;
- int slot_stat;
-
- u8 amem[1024];
- int amem_read;
-
- int cammode;
- struct mutex lock;
-};
-
-static int i2c_write_reg(struct i2c_adapter *adapter, u8 adr,
- u8 reg, u8 data)
-{
- u8 m[2] = {reg, data};
- struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = m, .len = 2};
-
- if (i2c_transfer(adapter, &msg, 1) != 1) {
- dev_err(&adapter->dev,
- "Failed to write to I2C register %02x@%02x!\n",
- reg, adr);
- return -1;
- }
- return 0;
-}
-
-static int i2c_write(struct i2c_adapter *adapter, u8 adr,
- u8 *data, u8 len)
-{
- struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = data, .len = len};
-
- if (i2c_transfer(adapter, &msg, 1) != 1) {
- dev_err(&adapter->dev, "Failed to write to I2C!\n");
- return -1;
- }
- return 0;
-}
-
-static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr,
- u8 reg, u8 *val)
-{
- struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
- .buf = &reg, .len = 1},
- {.addr = adr, .flags = I2C_M_RD,
- .buf = val, .len = 1} };
-
- if (i2c_transfer(adapter, msgs, 2) != 2) {
- dev_err(&adapter->dev, "error in i2c_read_reg\n");
- return -1;
- }
- return 0;
-}
-
-static int i2c_read(struct i2c_adapter *adapter, u8 adr,
- u8 reg, u8 *data, u8 n)
-{
- struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
- .buf = &reg, .len = 1},
- {.addr = adr, .flags = I2C_M_RD,
- .buf = data, .len = n} };
-
- if (i2c_transfer(adapter, msgs, 2) != 2) {
- dev_err(&adapter->dev, "error in i2c_read\n");
- return -1;
- }
- return 0;
-}
-
-static int read_block(struct cxd *ci, u8 adr, u8 *data, u8 n)
-{
- int status;
-
- status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
- if (!status) {
- ci->lastaddress = adr;
- status = i2c_read(ci->i2c, ci->cfg.adr, 1, data, n);
- }
- return status;
-}
-
-static int read_reg(struct cxd *ci, u8 reg, u8 *val)
-{
- return read_block(ci, reg, val, 1);
-}
-
-
-static int read_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
-{
- int status;
- u8 addr[3] = {2, address & 0xff, address >> 8};
-
- status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
- if (!status)
- status = i2c_read(ci->i2c, ci->cfg.adr, 3, data, n);
- return status;
-}
-
-static int write_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
-{
- int status;
- u8 addr[3] = {2, address & 0xff, address >> 8};
-
- status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
- if (!status) {
- u8 buf[256] = {3};
- memcpy(buf+1, data, n);
- status = i2c_write(ci->i2c, ci->cfg.adr, buf, n+1);
- }
- return status;
-}
-
-static int read_io(struct cxd *ci, u16 address, u8 *val)
-{
- int status;
- u8 addr[3] = {2, address & 0xff, address >> 8};
-
- status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
- if (!status)
- status = i2c_read(ci->i2c, ci->cfg.adr, 3, val, 1);
- return status;
-}
-
-static int write_io(struct cxd *ci, u16 address, u8 val)
-{
- int status;
- u8 addr[3] = {2, address & 0xff, address >> 8};
- u8 buf[2] = {3, val};
-
- status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
- if (!status)
- status = i2c_write(ci->i2c, ci->cfg.adr, buf, 2);
- return status;
-}
-
-#if 0
-static int read_io_data(struct cxd *ci, u8 *data, u8 n)
-{
- int status;
- u8 addr[3] = { 2, 0, 0 };
-
- status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
- if (!status)
- status = i2c_read(ci->i2c, ci->cfg.adr, 3, data, n);
- return 0;
-}
-
-static int write_io_data(struct cxd *ci, u8 *data, u8 n)
-{
- int status;
- u8 addr[3] = {2, 0, 0};
-
- status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
- if (!status) {
- u8 buf[256] = {3};
- memcpy(buf+1, data, n);
- status = i2c_write(ci->i2c, ci->cfg.adr, buf, n + 1);
- }
- return 0;
-}
-#endif
-
-static int write_regm(struct cxd *ci, u8 reg, u8 val, u8 mask)
-{
- int status;
-
- status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, reg);
- if (!status && reg >= 6 && reg <= 8 && mask != 0xff)
- status = i2c_read_reg(ci->i2c, ci->cfg.adr, 1, &ci->regs[reg]);
- ci->regs[reg] = (ci->regs[reg] & (~mask)) | val;
- if (!status) {
- ci->lastaddress = reg;
- status = i2c_write_reg(ci->i2c, ci->cfg.adr, 1, ci->regs[reg]);
- }
- if (reg == 0x20)
- ci->regs[reg] &= 0x7f;
- return status;
-}
-
-static int write_reg(struct cxd *ci, u8 reg, u8 val)
-{
- return write_regm(ci, reg, val, 0xff);
-}
-
-#ifdef BUFFER_MODE
-static int write_block(struct cxd *ci, u8 adr, u8 *data, int n)
-{
- int status;
- u8 buf[256] = {1};
-
- status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
- if (!status) {
- ci->lastaddress = adr;
- memcpy(buf + 1, data, n);
- status = i2c_write(ci->i2c, ci->cfg.adr, buf, n + 1);
- }
- return status;
-}
-#endif
-
-static void set_mode(struct cxd *ci, int mode)
-{
- if (mode == ci->mode)
- return;
-
- switch (mode) {
- case 0x00: /* IO mem */
- write_regm(ci, 0x06, 0x00, 0x07);
- break;
- case 0x01: /* ATT mem */
- write_regm(ci, 0x06, 0x02, 0x07);
- break;
- default:
- break;
- }
- ci->mode = mode;
-}
-
-static void cam_mode(struct cxd *ci, int mode)
-{
- if (mode == ci->cammode)
- return;
-
- switch (mode) {
- case 0x00:
- write_regm(ci, 0x20, 0x80, 0x80);
- break;
- case 0x01:
-#ifdef BUFFER_MODE
- if (!ci->en.read_data)
- return;
- dev_info(&ci->i2c->dev, "enable cam buffer mode\n");
- /* write_reg(ci, 0x0d, 0x00); */
- /* write_reg(ci, 0x0e, 0x01); */
- write_regm(ci, 0x08, 0x40, 0x40);
- /* read_reg(ci, 0x12, &dummy); */
- write_regm(ci, 0x08, 0x80, 0x80);
-#endif
- break;
- default:
- break;
- }
- ci->cammode = mode;
-}
-
-
-
-static int init(struct cxd *ci)
-{
- int status;
-
- mutex_lock(&ci->lock);
- ci->mode = -1;
- do {
- status = write_reg(ci, 0x00, 0x00);
- if (status < 0)
- break;
- status = write_reg(ci, 0x01, 0x00);
- if (status < 0)
- break;
- status = write_reg(ci, 0x02, 0x10);
- if (status < 0)
- break;
- status = write_reg(ci, 0x03, 0x00);
- if (status < 0)
- break;
- status = write_reg(ci, 0x05, 0xFF);
- if (status < 0)
- break;
- status = write_reg(ci, 0x06, 0x1F);
- if (status < 0)
- break;
- status = write_reg(ci, 0x07, 0x1F);
- if (status < 0)
- break;
- status = write_reg(ci, 0x08, 0x28);
- if (status < 0)
- break;
- status = write_reg(ci, 0x14, 0x20);
- if (status < 0)
- break;
-
-#if 0
- /* Input Mode C, BYPass Serial, TIVAL = low, MSB */
- status = write_reg(ci, 0x09, 0x4D);
- if (status < 0)
- break;
-#endif
- /* TOSTRT = 8, Mode B (gated clock), falling Edge,
- * Serial, POL=HIGH, MSB */
- status = write_reg(ci, 0x0A, 0xA7);
- if (status < 0)
- break;
-
- status = write_reg(ci, 0x0B, 0x33);
- if (status < 0)
- break;
- status = write_reg(ci, 0x0C, 0x33);
- if (status < 0)
- break;
-
- status = write_regm(ci, 0x14, 0x00, 0x0F);
- if (status < 0)
- break;
- status = write_reg(ci, 0x15, ci->clk_reg_b);
- if (status < 0)
- break;
- status = write_regm(ci, 0x16, 0x00, 0x0F);
- if (status < 0)
- break;
- status = write_reg(ci, 0x17, ci->clk_reg_f);
- if (status < 0)
- break;
-
- if (ci->cfg.clock_mode) {
- if (ci->cfg.polarity) {
- status = write_reg(ci, 0x09, 0x6f);
- if (status < 0)
- break;
- } else {
- status = write_reg(ci, 0x09, 0x6d);
- if (status < 0)
- break;
- }
- status = write_reg(ci, 0x20, 0x68);
- if (status < 0)
- break;
- status = write_reg(ci, 0x21, 0x00);
- if (status < 0)
- break;
- status = write_reg(ci, 0x22, 0x02);
- if (status < 0)
- break;
- } else {
- if (ci->cfg.polarity) {
- status = write_reg(ci, 0x09, 0x4f);
- if (status < 0)
- break;
- } else {
- status = write_reg(ci, 0x09, 0x4d);
- if (status < 0)
- break;
- }
-
- status = write_reg(ci, 0x20, 0x28);
- if (status < 0)
- break;
- status = write_reg(ci, 0x21, 0x00);
- if (status < 0)
- break;
- status = write_reg(ci, 0x22, 0x07);
- if (status < 0)
- break;
- }
-
- status = write_regm(ci, 0x20, 0x80, 0x80);
- if (status < 0)
- break;
- status = write_regm(ci, 0x03, 0x02, 0x02);
- if (status < 0)
- break;
- status = write_reg(ci, 0x01, 0x04);
- if (status < 0)
- break;
- status = write_reg(ci, 0x00, 0x31);
- if (status < 0)
- break;
-
- /* Put TS in bypass */
- status = write_regm(ci, 0x09, 0x08, 0x08);
- if (status < 0)
- break;
- ci->cammode = -1;
- cam_mode(ci, 0);
- } while (0);
- mutex_unlock(&ci->lock);
-
- return 0;
-}
-
-static int read_attribute_mem(struct dvb_ca_en50221 *ca,
- int slot, int address)
-{
- struct cxd *ci = ca->data;
-#if 0
- if (ci->amem_read) {
- if (address <= 0 || address > 1024)
- return -EIO;
- return ci->amem[address];
- }
-
- mutex_lock(&ci->lock);
- write_regm(ci, 0x06, 0x00, 0x05);
- read_pccard(ci, 0, &ci->amem[0], 128);
- read_pccard(ci, 128, &ci->amem[0], 128);
- read_pccard(ci, 256, &ci->amem[0], 128);
- read_pccard(ci, 384, &ci->amem[0], 128);
- write_regm(ci, 0x06, 0x05, 0x05);
- mutex_unlock(&ci->lock);
- return ci->amem[address];
-#else
- u8 val;
- mutex_lock(&ci->lock);
- set_mode(ci, 1);
- read_pccard(ci, address, &val, 1);
- mutex_unlock(&ci->lock);
- /* printk(KERN_INFO "%02x:%02x\n", address,val); */
- return val;
-#endif
-}
-
-static int write_attribute_mem(struct dvb_ca_en50221 *ca, int slot,
- int address, u8 value)
-{
- struct cxd *ci = ca->data;
-
- mutex_lock(&ci->lock);
- set_mode(ci, 1);
- write_pccard(ci, address, &value, 1);
- mutex_unlock(&ci->lock);
- return 0;
-}
-
-static int read_cam_control(struct dvb_ca_en50221 *ca,
- int slot, u8 address)
-{
- struct cxd *ci = ca->data;
- u8 val;
-
- mutex_lock(&ci->lock);
- set_mode(ci, 0);
- read_io(ci, address, &val);
- mutex_unlock(&ci->lock);
- return val;
-}
-
-static int write_cam_control(struct dvb_ca_en50221 *ca, int slot,
- u8 address, u8 value)
-{
- struct cxd *ci = ca->data;
-
- mutex_lock(&ci->lock);
- set_mode(ci, 0);
- write_io(ci, address, value);
- mutex_unlock(&ci->lock);
- return 0;
-}
-
-static int slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
- struct cxd *ci = ca->data;
-
- mutex_lock(&ci->lock);
-#if 0
- write_reg(ci, 0x00, 0x21);
- write_reg(ci, 0x06, 0x1F);
- write_reg(ci, 0x00, 0x31);
-#else
-#if 0
- write_reg(ci, 0x06, 0x1F);
- write_reg(ci, 0x06, 0x2F);
-#else
- cam_mode(ci, 0);
- write_reg(ci, 0x00, 0x21);
- write_reg(ci, 0x06, 0x1F);
- write_reg(ci, 0x00, 0x31);
- write_regm(ci, 0x20, 0x80, 0x80);
- write_reg(ci, 0x03, 0x02);
- ci->ready = 0;
-#endif
-#endif
- ci->mode = -1;
- {
- int i;
-#if 0
- u8 val;
-#endif
- for (i = 0; i < 100; i++) {
- msleep(10);
-#if 0
- read_reg(ci, 0x06, &val);
- dev_info(&ci->i2c->dev, "%d:%02x\n", i, val);
- if (!(val&0x10))
- break;
-#else
- if (ci->ready)
- break;
-#endif
- }
- }
- mutex_unlock(&ci->lock);
- /* msleep(500); */
- return 0;
-}
-
-static int slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
- struct cxd *ci = ca->data;
-
- dev_info(&ci->i2c->dev, "slot_shutdown\n");
- mutex_lock(&ci->lock);
- write_regm(ci, 0x09, 0x08, 0x08);
- write_regm(ci, 0x20, 0x80, 0x80); /* Reset CAM Mode */
- write_regm(ci, 0x06, 0x07, 0x07); /* Clear IO Mode */
- ci->mode = -1;
- mutex_unlock(&ci->lock);
- return 0;
-}
-
-static int slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
- struct cxd *ci = ca->data;
-
- mutex_lock(&ci->lock);
- write_regm(ci, 0x09, 0x00, 0x08);
- set_mode(ci, 0);
-#ifdef BUFFER_MODE
- cam_mode(ci, 1);
-#endif
- mutex_unlock(&ci->lock);
- return 0;
-}
-
-
-static int campoll(struct cxd *ci)
-{
- u8 istat;
-
- read_reg(ci, 0x04, &istat);
- if (!istat)
- return 0;
- write_reg(ci, 0x05, istat);
-
- if (istat&0x40) {
- ci->dr = 1;
- dev_info(&ci->i2c->dev, "DR\n");
- }
- if (istat&0x20)
- dev_info(&ci->i2c->dev, "WC\n");
-
- if (istat&2) {
- u8 slotstat;
-
- read_reg(ci, 0x01, &slotstat);
- if (!(2&slotstat)) {
- if (!ci->slot_stat) {
- ci->slot_stat = DVB_CA_EN50221_POLL_CAM_PRESENT;
- write_regm(ci, 0x03, 0x08, 0x08);
- }
-
- } else {
- if (ci->slot_stat) {
- ci->slot_stat = 0;
- write_regm(ci, 0x03, 0x00, 0x08);
- dev_info(&ci->i2c->dev, "NO CAM\n");
- ci->ready = 0;
- }
- }
- if (istat&8 &&
- ci->slot_stat == DVB_CA_EN50221_POLL_CAM_PRESENT) {
- ci->ready = 1;
- ci->slot_stat |= DVB_CA_EN50221_POLL_CAM_READY;
- }
- }
- return 0;
-}
-
-
-static int poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
-{
- struct cxd *ci = ca->data;
- u8 slotstat;
-
- mutex_lock(&ci->lock);
- campoll(ci);
- read_reg(ci, 0x01, &slotstat);
- mutex_unlock(&ci->lock);
-
- return ci->slot_stat;
-}
-
-#ifdef BUFFER_MODE
-static int read_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount)
-{
- struct cxd *ci = ca->data;
- u8 msb, lsb;
- u16 len;
-
- mutex_lock(&ci->lock);
- campoll(ci);
- mutex_unlock(&ci->lock);
-
- dev_info(&ci->i2c->dev, "read_data\n");
- if (!ci->dr)
- return 0;
-
- mutex_lock(&ci->lock);
- read_reg(ci, 0x0f, &msb);
- read_reg(ci, 0x10, &lsb);
- len = (msb<<8)|lsb;
- read_block(ci, 0x12, ebuf, len);
- ci->dr = 0;
- mutex_unlock(&ci->lock);
-
- return len;
-}
-
-static int write_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount)
-{
- struct cxd *ci = ca->data;
-
- mutex_lock(&ci->lock);
- printk(kern_INFO "write_data %d\n", ecount);
- write_reg(ci, 0x0d, ecount>>8);
- write_reg(ci, 0x0e, ecount&0xff);
- write_block(ci, 0x11, ebuf, ecount);
- mutex_unlock(&ci->lock);
- return ecount;
-}
-#endif
-
-static struct dvb_ca_en50221 en_templ = {
- .read_attribute_mem = read_attribute_mem,
- .write_attribute_mem = write_attribute_mem,
- .read_cam_control = read_cam_control,
- .write_cam_control = write_cam_control,
- .slot_reset = slot_reset,
- .slot_shutdown = slot_shutdown,
- .slot_ts_enable = slot_ts_enable,
- .poll_slot_status = poll_slot_status,
-#ifdef BUFFER_MODE
- .read_data = read_data,
- .write_data = write_data,
-#endif
-
-};
-
-struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
- void *priv,
- struct i2c_adapter *i2c)
-{
- struct cxd *ci;
- u8 val;
-
- if (i2c_read_reg(i2c, cfg->adr, 0, &val) < 0) {
- dev_info(&i2c->dev, "No CXD2099 detected at %02x\n", cfg->adr);
- return NULL;
- }
-
- ci = kzalloc(sizeof(struct cxd), GFP_KERNEL);
- if (!ci)
- return NULL;
-
- mutex_init(&ci->lock);
- ci->cfg = *cfg;
- ci->i2c = i2c;
- ci->lastaddress = 0xff;
- ci->clk_reg_b = 0x4a;
- ci->clk_reg_f = 0x1b;
-
- ci->en = en_templ;
- ci->en.data = ci;
- init(ci);
- dev_info(&i2c->dev, "Attached CXD2099AR at %02x\n", ci->cfg.adr);
- return &ci->en;
-}
-EXPORT_SYMBOL(cxd2099_attach);
-
-MODULE_DESCRIPTION("cxd2099");
-MODULE_AUTHOR("Ralph Metzler");
-MODULE_LICENSE("GPL");
diff -uNr linux-3.17.7/drivers/staging/media/cxd2099/cxd2099.h linux.octonet/drivers/staging/media/cxd2099/cxd2099.h
--- linux-3.17.7/drivers/staging/media/cxd2099/cxd2099.h 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/staging/media/cxd2099/cxd2099.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,51 +0,0 @@
-/*
- * cxd2099.h: Driver for the CXD2099AR Common Interface Controller
- *
- * Copyright (C) 2010-2011 Digital Devices GmbH
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 only, as published by the Free Software Foundation.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef _CXD2099_H_
-#define _CXD2099_H_
-
-#include <dvb_ca_en50221.h>
-
-struct cxd2099_cfg {
- u32 bitrate;
- u8 adr;
- u8 polarity:1;
- u8 clock_mode:1;
-};
-
-#if defined(CONFIG_DVB_CXD2099) || \
- (defined(CONFIG_DVB_CXD2099_MODULE) && defined(MODULE))
-struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
- void *priv, struct i2c_adapter *i2c);
-#else
-
-static inline struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
- void *priv, struct i2c_adapter *i2c)
-{
- dev_warn(&i2c->dev, "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif
diff -uNr linux-3.17.7/drivers/staging/media/cxd2099/Kconfig linux.octonet/drivers/staging/media/cxd2099/Kconfig
--- linux-3.17.7/drivers/staging/media/cxd2099/Kconfig 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/staging/media/cxd2099/Kconfig 1970-01-01 01:00:00.000000000 +0100
@@ -1,12 +0,0 @@
-config DVB_CXD2099
- tristate "CXD2099AR Common Interface driver"
- depends on DVB_CORE && PCI && I2C
- ---help---
- Support for the CI module found on cards based on
- - Micronas ngene PCIe bridge: cineS2 etc.
- - Digital Devices PCIe bridge: Octopus series
-
- For now, data is passed through '/dev/dvb/adapterX/sec0':
- - Encrypted data must be written to 'sec0'.
- - Decrypted data can be read from 'sec0'.
- - Setup the CAM using device 'ca0'.
diff -uNr linux-3.17.7/drivers/staging/media/cxd2099/Makefile linux.octonet/drivers/staging/media/cxd2099/Makefile
--- linux-3.17.7/drivers/staging/media/cxd2099/Makefile 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/staging/media/cxd2099/Makefile 1970-01-01 01:00:00.000000000 +0100
@@ -1,5 +0,0 @@
-obj-$(CONFIG_DVB_CXD2099) += cxd2099.o
-
-ccflags-y += -Idrivers/media/dvb-core/
-ccflags-y += -Idrivers/media/dvb-frontends/
-ccflags-y += -Idrivers/media/tuners/
diff -uNr linux-3.17.7/drivers/staging/media/cxd2099/TODO linux.octonet/drivers/staging/media/cxd2099/TODO
--- linux-3.17.7/drivers/staging/media/cxd2099/TODO 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/staging/media/cxd2099/TODO 1970-01-01 01:00:00.000000000 +0100
@@ -1,12 +0,0 @@
-For now, data is passed through '/dev/dvb/adapterX/sec0':
- - Encrypted data must be written to 'sec0'.
- - Decrypted data can be read from 'sec0'.
- - Setup the CAM using device 'ca0'.
-
-But this is wrong. There are some discussions about the proper way for
-doing it, as seen at:
- http://www.mail-archive.com/linux-media@vger.kernel.org/msg22196.html
-
-While there's no proper fix for it, the driver should be kept in staging.
-
-Patches should be submitted to: linux-media@vger.kernel.org.
diff -uNr linux-3.17.7/drivers/staging/media/Kconfig linux.octonet/drivers/staging/media/Kconfig
--- linux-3.17.7/drivers/staging/media/Kconfig 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/staging/media/Kconfig 2014-12-19 01:29:09.170250619 +0100
@@ -23,8 +23,6 @@
source "drivers/staging/media/bcm2048/Kconfig"
-source "drivers/staging/media/cxd2099/Kconfig"
-
source "drivers/staging/media/davinci_vpfe/Kconfig"
source "drivers/staging/media/dt3155v4l/Kconfig"
diff -uNr linux-3.17.7/drivers/staging/media/Makefile linux.octonet/drivers/staging/media/Makefile
--- linux-3.17.7/drivers/staging/media/Makefile 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/drivers/staging/media/Makefile 2014-12-19 01:29:09.170250619 +0100
@@ -1,6 +1,5 @@
obj-$(CONFIG_DVB_AS102) += as102/
obj-$(CONFIG_I2C_BCM2048) += bcm2048/
-obj-$(CONFIG_DVB_CXD2099) += cxd2099/
obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_VIDEO_DT3155) += dt3155v4l/
obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/
diff -uNr linux-3.17.7/include/linux/platform_data/atmel.h linux.octonet/include/linux/platform_data/atmel.h
--- linux-3.17.7/include/linux/platform_data/atmel.h 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/include/linux/platform_data/atmel.h 2014-12-19 01:29:09.170250619 +0100
@@ -75,6 +75,8 @@
/* default is false, only for at32ap7000 chip is true */
bool need_reset_workaround;
+ int ecc_size;
+ int ecc_bytes;
};
/* Serial */
diff -uNr linux-3.17.7/net/Kconfig linux.octonet/net/Kconfig
--- linux-3.17.7/net/Kconfig 2014-12-16 18:37:26.000000000 +0100
+++ linux.octonet/net/Kconfig 2014-12-19 01:29:09.170250619 +0100
@@ -53,8 +53,8 @@
config INET
bool "TCP/IP networking"
- select CRYPTO
- select CRYPTO_AES
+# select CRYPTO
+# select CRYPTO_AES
---help---
These are the protocols used on the Internet and on most local
Ethernets. It is highly recommended to say Y here (this will enlarge
Reference in New Issue Copy Permalink