A firmware with minisatip for Inverto IDL-400s/Grundig GSS.BOX/Telestar Digibit R1

Go to file

Jaroslav Kysela 10c89e86a2 minisatip: add initial version of code for the AXE platform		2015-03-29 21:31:38 +02:00
firmware	add firmware binary 1.17.0.120 with the extract tool	2015-03-26 20:11:53 +01:00
fs-add	added axe kernel modules, dropbear, rewrite inittab system, use /dev/mtdblock4 for config	2015-03-28 20:33:17 +01:00
kernel	build uImage.gz for uboot	2015-03-26 20:56:24 +01:00
patches	minisatip: add initial version of code for the AXE platform	2015-03-29 21:31:38 +02:00
toolchain	add toolchain (sh4-gcc 4.5.3) for kernel compilation	2015-03-26 20:14:17 +01:00
tools	added axe kernel modules, dropbear, rewrite inittab system, use /dev/mtdblock4 for config	2015-03-28 20:33:17 +01:00
.gitignore	Add minisatip	2015-03-28 09:36:35 +01:00
Makefile	minisatip: add initial version of code for the AXE platform	2015-03-29 21:31:38 +02:00
README.md	README.md - add configuration note	2015-03-29 16:41:04 +02:00

satip-axe

Requirements:

git, python
STLinux 2.4 (all-sh4-glibc) - http://www.stlinux.com - installed to /opt/STM/STLinux-2.4/
fakeroot package/tools

Compilation:

Booting uImage.gz on Inverto IDL-400s/Grundig GSS.BOX/Inverto IDL-400S from USB:

connect TTL USB serial adapter to J3 connector (4 pins at the power supply)
- pin 1 = 3.6V (do not use), pin 2 = GND, pin 3 = RXD (STM CPU), pin 4 = TXD (STM CPU)
- parameters: 115200,8N1
press 'Enter' when you turn on the box (you have only one second) to get 'idl4k> ' prompt
modify bootargs (optional - for original firmware)

set bootargs=console=ttyAS0,115200

set debugfw "debugfw=usb start;usb start;fatload usb 0 0x84000000 uimage.gz;set bootargs console=ttyAS0,115200 bigphysarea=20000;bootm 0x84000000"

Configuration