satip-axe

A firmware with minisatip for Inverto IDL-400s/Grundig GSS.BOX/Telestar Digibit R1

---

Releases:

• see to dist directory

Requirements:

• git, python
• STLinux 2.4 (all-sh4-glibc) - http://www.stlinux.com - installed to /opt/STM/STLinux-2.4/
• fakeroot package/tools

Compilation:

• just type 'make'
• kernel with rootfs is in kernel/arch/sh/boot/uImage.gz

Booting uImage.gz on Inverto IDL-400S/Grundig GSS.BOX/Telestar Digibit R1 from USB:

• connect TTL USB serial adapter to J3 connector (4 pins at the power supply)
  • pin 1 = 3.6V (do not use), pin 2 = GND, pin 3 = RXD (STM CPU), pin 4 = TXD (STM CPU)
  • parameters: 115200,8N1
• press 'Enter' when you turn on the box (you have only one second) to get 'idl4k> ' prompt (it seems that 'Enter' is required also to enable the serial console)
• modify bootargs (optional - for original firmware)

set bootargs=console=ttyAS0,115200

• set debugfw environment variable

set debugfw "debugfw=usb start;usb start;fatload usb 0 0x84000000 uimage.gz;set bootargs console=ttyAS0,115200 bigphysarea=20000;bootm 0x84000000"

• you may type 'save' to store this settings permanently
• to execute the debugfw type 'run debugfw'
• note that the USB stick should be in the first (upper) USB connector

Configuration

• dhcp client, telnetd, dropbear (ssh daemon) and minisatip are active by default
• configuration is stored in /etc/sysconfig/config