A firmware with minisatip for Inverto IDL-400s/Grundig GSS.BOX/Telestar Digibit R1
Go to file
2015-03-28 20:33:17 +01:00
firmware add firmware binary 1.17.0.120 with the extract tool 2015-03-26 20:11:53 +01:00
fs-add added axe kernel modules, dropbear, rewrite inittab system, use /dev/mtdblock4 for config 2015-03-28 20:33:17 +01:00
kernel build uImage.gz for uboot 2015-03-26 20:56:24 +01:00
toolchain add toolchain (sh4-gcc 4.5.3) for kernel compilation 2015-03-26 20:14:17 +01:00
tools added axe kernel modules, dropbear, rewrite inittab system, use /dev/mtdblock4 for config 2015-03-28 20:33:17 +01:00
.gitignore Add minisatip 2015-03-28 09:36:35 +01:00
Makefile added axe kernel modules, dropbear, rewrite inittab system, use /dev/mtdblock4 for config 2015-03-28 20:33:17 +01:00
README.md added axe kernel modules, dropbear, rewrite inittab system, use /dev/mtdblock4 for config 2015-03-28 20:33:17 +01:00

satip-axe

Requirements:

  • git, python
  • STLinux 2.4 (all-sh4-glibc) - http://www.stlinux.com - installed to /opt/STM/STLinux-2.4/
  • fakeroot package/tools

Compilation:

  • just type 'make'
  • kernel with rootfs is in kernel/arch/sh/boot/uImage.gz

Booting uImage.gz on Inverto IDL-400s/Grundig GSS.BOX/Inverto IDL-400S from USB:

  • connect TTL USB serial adapter to J3 connector (4 pins at the power supply)
    • pin 1 = 3.6V (do not use), pin 2 = GND, pin 3 = RXD (STM CPU), pin 4 = TXD (STM CPU)
    • parameters: 115200,8N1
  • press 'Enter' when you turn on the box (you have only one second) to get 'idl4k> ' prompt
  • modify bootargs (optional - for original firmware)

set bootargs=console=ttyAS0,115200

  • set debugfw environment variable

set debugfw "debugfw=usb start;usb start;fatload usb 0 0x84000000 uimage.gz;set bootargs console=ttyAS0,115200 bigphysarea=20000;bootm 0x84000000"

  • you may type 'save' to store this settings permanently
  • to execute the debugfw type 'run debugfw'
  • note that the USB stick should be in the first (upper) USB connector