Added support for smart card activation

2025-03-01 10:50:46 +00:00 · 2015-01-30 13:38:44 +01:00
parent 7f195606ee
commit bf7cc2c04f
34 changed files with 678 additions and 45 deletions
--- a/7
+++ b/7
@@ -8414,7 +8414,7 @@ Video Disk Recorder Revision History
  generated an index file with VDR version 2.0.6 you may want to do so again with this
  version to make sure the index is OK.

-2015-01-27: Version 2.1.8
+2015-01-30: Version 2.1.8

 - Updated the Italian OSD texts (thanks to Diego Pierotto).
 - Fixed "warning: invalid suffix on literal" with GCC 4.8 and C++11 (thanks to Joerg
@@ -8439,3 +8439,8 @@ Video Disk Recorder Revision History
 - The keys '1' and '3' can now be used in replay mode to position an editing mark
  in "binary" mode (based on a patch from Rolf Ahrenberg, with modifications by Helmut
  Auer). See MANUAL, section "Editing a Recording".
+- The Yellow button in the "Setup/CAM" menu can now be used to put the selected
+  CAM into a mode where it remains assigned to a device that is tuned to the current
+  channel until the smart card it contains is activated and the CAM thus starts to
+  descramble (see MANUAL for details).
+- Added support for smart card activation (see MANUAL, section "Setup/CAM").
--- a/14
+++ b/14
@@ -845,7 +845,19 @@ Version 2.0
                         if it is in the process of being reset, its current status
                         is displayed.  The "Red" key can be pressed to enter the CAM
                         menu, and the "Green" key triggers a reset of the selected
-                         slot. The "Ok" key also opens the CAM menu.
+                         slot. The "Ok" key also opens the CAM menu. The "Yellow" key
+                         assigns the selected CAM to a device and switches it to the
+                         current channel. The CAM/device combination remains tuned to
+                         the current channel until the smart card in the CAM has been
+                         activated and thus starts to descramble, or until a recording
+                         needs this device. Pressing the "Yellow" key while a CAM is
+                         in activation mode cancels the activation. The activation mode
+                         remains in effect even if you switch to a different channel
+                         (provided there is more than one device in the system) or
+                         watch a recording. To activate your smart card simply switch
+                         to the channel you want to watch, open the "Setup/CAM" menu,
+                         select the CAM that contains the smart card (in case you
+                         have more than one CAM) and press the "Yellow" key.

  Recording:

--- a/ci.c
+++ b/ci.c
@@ -4,7 +4,7 @@
 * See the main source file 'vdr.c' for copyright information and
 * how to reach the author.
 *
- * $Id: ci.c 3.17 2015/01/15 09:14:57 kls Exp $
+ * $Id: ci.c 3.18 2015/01/30 12:24:53 kls Exp $
 */

 #include "ci.h"
@@ -22,6 +22,7 @@
 #include "receiver.h"
 #include "remux.h"
 #include "libsi/si.h"
+#include "skins.h"
 #include "tools.h"

 // Set these to 'true' for debug output:
@@ -236,6 +237,53 @@ void cCaPidReceiver::Receive(uchar *Data, int Length)
     }
 }

+// --- cCaActivationReceiver -------------------------------------------------
+
+// A receiver that is used to make the device stay on a given channel and
+// keep the CAM slot assigned.
+
+#define UNSCRAMBLE_TIME     5 // seconds of receiving purely unscrambled data before considering the smart card "activated"
+#define TS_PACKET_FACTOR 1024 // only process every TS_PACKET_FACTORth packet to keep the load down
+
+class cCaActivationReceiver : public cReceiver {
+private:
+  cCamSlot *camSlot;
+  time_t lastScrambledTime;
+  int numTsPackets;
+protected:
+  virtual void Receive(uchar *Data, int Length);
+public:
+  cCaActivationReceiver(const cChannel *Channel, cCamSlot *CamSlot);
+  virtual ~cCaActivationReceiver();
+  };
+
+cCaActivationReceiver::cCaActivationReceiver(const cChannel *Channel, cCamSlot *CamSlot)
+:cReceiver(Channel, MINPRIORITY + 1)
+{
+  camSlot = CamSlot;
+  lastScrambledTime = time(NULL);
+  numTsPackets = 0;
+}
+
+cCaActivationReceiver::~cCaActivationReceiver()
+{
+  Detach();
+}
+
+void cCaActivationReceiver::Receive(uchar *Data, int Length)
+{
+  if (numTsPackets++ % TS_PACKET_FACTOR == 0) {
+     time_t Now = time(NULL);
+     if (TsIsScrambled(Data))
+        lastScrambledTime = Now;
+     else if (Now - lastScrambledTime > UNSCRAMBLE_TIME) {
+        dsyslog("CAM %d: activated!", camSlot->SlotNumber());
+        Skins.QueueMessage(mtInfo, tr("CAM activated!"));
+        Detach();
+        }
+     }
+}
+
 // --- cTPDU -----------------------------------------------------------------

 #define MAX_TPDU_SIZE  2048
@@ -1696,6 +1744,7 @@ cCamSlot::cCamSlot(cCiAdapter *CiAdapter, bool ReceiveCaPids)
  ciAdapter = CiAdapter;
  assignedDevice = NULL;
  caPidReceiver = ReceiveCaPids ? new cCaPidReceiver : NULL;
+  caActivationReceiver = NULL;
  slotIndex = -1;
  lastModuleStatus = msReset; // avoids initial reset log message
  resetTime = 0;
@@ -1715,6 +1764,7 @@ cCamSlot::~cCamSlot()
  if (assignedDevice)
     assignedDevice->SetCamSlot(NULL);
  delete caPidReceiver;
+  delete caActivationReceiver;
  CamSlots.Del(this, false);
  DeleteAllConnections();
 }
@@ -1735,8 +1785,10 @@ bool cCamSlot::Assign(cDevice *Device, bool Query)
                 Device->SetCamSlot(this);
                 dsyslog("CAM %d: assigned to device %d", slotNumber, Device->DeviceNumber() + 1);
                 }
-              else
+              else {
+                 CancelActivation();
                 dsyslog("CAM %d: unassigned", slotNumber);
+                 }
              }
           else
              return false;
@@ -1772,6 +1824,8 @@ void cCamSlot::DeleteAllConnections(void)
 void cCamSlot::Process(cTPDU *TPDU)
 {
  cMutexLock MutexLock(&mutex);
+  if (caActivationReceiver && !caActivationReceiver->IsAttached())
+     CancelActivation();
  if (TPDU) {
     int n = TPDU->Tcid();
     if (1 <= n && n <= MAX_CONNECTIONS_PER_CAM_SLOT) {
@@ -1795,6 +1849,7 @@ void cCamSlot::Process(cTPDU *TPDU)
               dbgprotocol("Slot %d: no module present\n", slotNumber);
               isyslog("CAM %d: no module present", slotNumber);
               DeleteAllConnections();
+               CancelActivation();
               break;
          case msReset:
               dbgprotocol("Slot %d: module reset\n", slotNumber);
@@ -1856,6 +1911,37 @@ bool cCamSlot::Reset(void)
  return false;
 }

+bool cCamSlot::CanActivate(void)
+{
+  return ModuleStatus() == msReady;
+}
+
+void cCamSlot::StartActivation(void)
+{
+  cMutexLock MutexLock(&mutex);
+  if (!caActivationReceiver) {
+     if (cDevice *d = Device()) {
+        if (cChannel *Channel = Channels.GetByNumber(cDevice::CurrentChannel())) {
+           caActivationReceiver = new cCaActivationReceiver(Channel, this);
+           d->AttachReceiver(caActivationReceiver);
+           dsyslog("CAM %d: activating on device %d with channel %d (%s)", SlotNumber(), d->DeviceNumber() + 1, Channel->Number(), Channel->Name());
+           }
+        }
+     }
+}
+
+void cCamSlot::CancelActivation(void)
+{
+  cMutexLock MutexLock(&mutex);
+  delete caActivationReceiver;
+  caActivationReceiver = NULL;
+}
+
+bool cCamSlot::IsActivating(void)
+{
+  return caActivationReceiver;
+}
+
 eModuleStatus cCamSlot::ModuleStatus(void)
 {
  cMutexLock MutexLock(&mutex);
--- a/ci.h
+++ b/ci.h
@@ -4,7 +4,7 @@
 * See the main source file 'vdr.c' for copyright information and
 * how to reach the author.
 *
- * $Id: ci.h 3.9 2015/01/15 09:18:09 kls Exp $
+ * $Id: ci.h 3.10 2015/01/30 12:24:38 kls Exp $
 */

 #ifndef __CI_H
@@ -123,6 +123,7 @@ class cCiTransportConnection;
 class cCiSession;
 class cCiCaProgramData;
 class cCaPidReceiver;
+class cCaActivationReceiver;

 class cCamSlot : public cListObject {
  friend class cCiAdapter;
@@ -133,6 +134,7 @@ private:
  cCiAdapter *ciAdapter;
  cDevice *assignedDevice;
  cCaPidReceiver *caPidReceiver;
+  cCaActivationReceiver *caActivationReceiver;
  int slotIndex;
  int slotNumber;
  cCiTransportConnection *tc[MAX_CONNECTIONS_PER_CAM_SLOT + 1];  // connection numbering starts with 1
@@ -182,6 +184,23 @@ public:
  virtual bool Reset(void);
       ///< Resets the CAM in this slot.
       ///< Returns true if the operation was successful.
+  virtual bool CanActivate(void);
+       ///< Returns true if there is a CAM in this slot that can be put into
+       ///< activation mode.
+  virtual void StartActivation(void);
+       ///< Puts the CAM in this slot into a mode where an inserted smart card
+       ///< can be activated. The default action is to make IsActivating() return
+       ///< true, which causes the device this CAM slot is attached to to never
+       ///< automatically detach any receivers with negative priority if the
+       ///< PIDs they want to receive are not decrypted by the CAM.
+       ///< StartActivation() must be called *after* the CAM slot has been assigned
+       ///< to a device. The CAM slot will stay in activation mode until the CAM
+       ///< begins to decrypt, a call to CancelActivation() is made, or the device
+       ///< is needed for a recording.
+  virtual void CancelActivation(void);
+       ///< Cancels a previously started activation (if any).
+  virtual bool IsActivating(void);
+       ///< Returns true if this CAM slot is currently activating a smart card.
  virtual eModuleStatus ModuleStatus(void);
       ///< Returns the status of the CAM in this slot.
  virtual const char *GetCamName(void);
--- a/device.c
+++ b/device.c
@@ -4,7 +4,7 @@
 * See the main source file 'vdr.c' for copyright information and
 * how to reach the author.
 *
- * $Id: device.c 3.19 2015/01/14 12:02:44 kls Exp $
+ * $Id: device.c 3.20 2015/01/30 12:11:30 kls Exp $
 */

 #include "device.h"
@@ -756,7 +756,7 @@ eSetChannelResult cDevice::SetChannel(const cChannel *Channel, bool LiveView)

  cDevice *Device = (LiveView && IsPrimaryDevice()) ? GetDevice(Channel, LIVEPRIORITY, true) : this;

-  bool NeedsTransferMode = Device != this;
+  bool NeedsTransferMode = LiveView && Device != PrimaryDevice();
  // If the CAM slot wants the TS data, we need to switch to Transfer Mode:
  if (!NeedsTransferMode && LiveView && IsPrimaryDevice() && CamSlot() && CamSlot()->WantsTsData())
     NeedsTransferMode = true;
@@ -767,7 +767,7 @@ eSetChannelResult cDevice::SetChannel(const cChannel *Channel, bool LiveView)
  // use the card that actually can receive it and transfer data from there:

  if (NeedsTransferMode) {
-     if (Device && CanReplay()) {
+     if (Device && PrimaryDevice()->CanReplay()) {
        if (Device->SetChannel(Channel, false) == scrOk) // calling SetChannel() directly, not SwitchChannel()!
           cControl::Launch(new cTransferControl(Device, Channel));
        else
@@ -1585,13 +1585,13 @@ void cDevice::Action(void)
                 bool DetachReceivers = false;
                 bool DescramblingOk = false;
                 int CamSlotNumber = 0;
+                 cCamSlot *cs = NULL;
                 if (startScrambleDetection) {
-                    cCamSlot *cs = CamSlot();
+                    cs = CamSlot();
                    CamSlotNumber = cs ? cs->SlotNumber() : 0;
                    if (CamSlotNumber) {
-                       bool Scrambled = b[3] & TS_SCRAMBLING_CONTROL;
                       int t = time(NULL) - startScrambleDetection;
-                       if (Scrambled) {
+                       if (TsIsScrambled(b)) {
                          if (t > TS_SCRAMBLING_TIMEOUT)
                             DetachReceivers = true;
                          }
@@ -1605,7 +1605,7 @@ void cDevice::Action(void)
                 Lock();
                 for (int i = 0; i < MAXRECEIVERS; i++) {
                     if (receiver[i] && receiver[i]->WantsPid(Pid)) {
-                        if (DetachReceivers) {
+                        if (DetachReceivers && cs && (!cs->IsActivating() || receiver[i]->Priority() >= LIVEPRIORITY)) {
                           dsyslog("detaching receiver - won't decrypt channel %s with CAM %d", *receiver[i]->ChannelID().ToString(), CamSlotNumber);
                           ChannelCamRelations.SetChecked(receiver[i]->ChannelID(), CamSlotNumber);
                           Detach(receiver[i]);
@@ -1704,7 +1704,7 @@ void cDevice::Detach(cReceiver *Receiver)
  if (camSlot) {
     if (Receiver->priority > MINPRIORITY) { // priority check to avoid an infinite loop with the CAM slot's caPidReceiver
        camSlot->StartDecrypting();
-        if (!camSlot->IsDecrypting())
+        if (!camSlot->IsDecrypting() && !camSlot->IsActivating())
           camSlot->Assign(NULL);
        }
     }
--- a/menu.c
+++ b/menu.c
@@ -4,7 +4,7 @@
 * See the main source file 'vdr.c' for copyright information and
 * how to reach the author.
 *
- * $Id: menu.c 3.31 2015/01/29 09:00:37 kls Exp $
+ * $Id: menu.c 3.32 2015/01/30 12:27:37 kls Exp $
 */

 #include "menu.h"
@@ -3419,7 +3419,7 @@ cMenuSetupCAMItem::cMenuSetupCAMItem(cCamSlot *CamSlot)

 bool cMenuSetupCAMItem::Changed(void)
 {
-  char buffer[32];
+  const char *Activating = "";
  const char *CamName = camSlot->GetCamName();
  if (!CamName) {
     switch (camSlot->ModuleStatus()) {
@@ -3429,7 +3429,10 @@ bool cMenuSetupCAMItem::Changed(void)
       default:        CamName = "-"; break;
       }
     }
-  snprintf(buffer, sizeof(buffer), " %d %s", camSlot->SlotNumber(), CamName);
+  else if (camSlot->IsActivating())
+     // TRANSLATORS: note the leading blank!
+     Activating = tr(" (activating)");
+  cString buffer = cString::sprintf(" %d %s%s", camSlot->SlotNumber(), CamName, Activating);
  if (strcmp(buffer, Text()) != 0) {
     SetText(buffer);
     return true;
@@ -3439,8 +3442,11 @@ bool cMenuSetupCAMItem::Changed(void)

 class cMenuSetupCAM : public cMenuSetupBase {
 private:
+  const char *activationHelp;
  eOSState Menu(void);
  eOSState Reset(void);
+  eOSState Activate(void);
+  void SetHelpKeys(void);
 public:
  cMenuSetupCAM(void);
  virtual eOSState ProcessKey(eKeys Key);
@@ -3448,13 +3454,33 @@ public:

 cMenuSetupCAM::cMenuSetupCAM(void)
 {
+  activationHelp = NULL;
  SetMenuCategory(mcSetupCam);
  SetSection(tr("CAM"));
  SetCols(15);
  SetHasHotkeys();
  for (cCamSlot *CamSlot = CamSlots.First(); CamSlot; CamSlot = CamSlots.Next(CamSlot))
      Add(new cMenuSetupCAMItem(CamSlot));
-  SetHelp(tr("Button$Menu"), tr("Button$Reset"));
+  SetHelpKeys();
+}
+
+void cMenuSetupCAM::SetHelpKeys(void)
+{
+  if (HasSubMenu())
+     return;
+  cMenuSetupCAMItem *item = (cMenuSetupCAMItem *)Get(Current());
+  const char *NewActivationHelp = "";
+  if (item) {
+     cCamSlot *CamSlot = item->CamSlot();
+     if (CamSlot->IsActivating())
+        NewActivationHelp = tr("Button$Cancel activation");
+     else if (CamSlot->CanActivate())
+        NewActivationHelp = tr("Button$Activate");
+     }
+  if (NewActivationHelp != activationHelp) {
+     activationHelp = NewActivationHelp;
+     SetHelp(tr("Button$Menu"), tr("Button$Reset"), activationHelp);
+     }
 }

 eOSState cMenuSetupCAM::Menu(void)
@@ -3484,6 +3510,41 @@ eOSState cMenuSetupCAM::Menu(void)
  return osContinue;
 }

+eOSState cMenuSetupCAM::Activate(void)
+{
+  cMenuSetupCAMItem *item = (cMenuSetupCAMItem *)Get(Current());
+  if (item) {
+     cCamSlot *CamSlot = item->CamSlot();
+     if (CamSlot->IsActivating())
+        CamSlot->CancelActivation();
+     else if (CamSlot->CanActivate()) {
+        if (cChannel *Channel = Channels.GetByNumber(cDevice::CurrentChannel())) {
+           for (int i = 0; i < cDevice::NumDevices(); i++) {
+               if (cDevice *Device = cDevice::GetDevice(i)) {
+                  if (Device->ProvidesChannel(Channel)) {
+                     if (Device->Priority() < LIVEPRIORITY) { // don't interrupt recordings
+                        if (CamSlot->CanActivate()) {
+                           if (CamSlot->Assign(Device, true)) { // query
+                              cControl::Shutdown(); // must end transfer mode before assigning CAM, otherwise it might be unassigned again
+                              if (CamSlot->Assign(Device)) {
+                                 if (Device->SwitchChannel(Channel, true)) {
+                                    CamSlot->StartActivation();
+                                    return osContinue;
+                                    }
+                                 }
+                              }
+                           }
+                        }
+                     }
+                  }
+               }
+           }
+        Skins.Message(mtError, tr("Can't activate CAM!"));
+        }
+     }
+  return osContinue;
+}
+
 eOSState cMenuSetupCAM::Reset(void)
 {
  cMenuSetupCAMItem *item = (cMenuSetupCAMItem *)Get(Current());
@@ -3505,12 +3566,14 @@ eOSState cMenuSetupCAM::ProcessKey(eKeys Key)
       case kOk:
       case kRed:    return Menu();
       case kGreen:  state = Reset(); break;
+       case kYellow: state = Activate(); break;
       default: break;
       }
     for (cMenuSetupCAMItem *ci = (cMenuSetupCAMItem *)First(); ci; ci = (cMenuSetupCAMItem *)ci->Next()) {
         if (ci->Changed())
            DisplayItem(ci);
         }
+     SetHelpKeys();
     }
  return state;
 }
--- a/po/ar.po
+++ b/po/ar.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2008-10-16 11:16-0400\n"
 "Last-Translator: Osama Alrawab <alrawab@hotmail.com>\n"
 "Language-Team: Arabic <ar@li.org>\n"
@@ -23,6 +23,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** قناة خاطئة ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "القناة غير متاحة"

@@ -1112,9 +1115,19 @@ msgstr "الكامة موجودة"
 msgid "CAM ready"
 msgstr "الكامة جاهزة"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "الكامة "

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "القائمة"

@@ -1127,6 +1140,9 @@ msgstr "فتح قائمة الكامة"
 msgid "Can't open CAM menu!"
 msgstr "تعذر فتح قائمة الكامة"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "الكامة مستخدمة الان هل تريد اعادة تشغيلها"

--- a/po/ca_ES.po
+++ b/po/ca_ES.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2008-03-02 19:02+0100\n"
 "Last-Translator: Luca Olivetti <luca@ventoso.org>\n"
 "Language-Team: Catalan <vdr@linuxtv.org>\n"
@@ -22,6 +22,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Canal incorrecte ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Canal no disponible!"

@@ -1111,9 +1114,19 @@ msgstr "CAM present"
 msgid "CAM ready"
 msgstr "CAM preparat"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Men<65>"

@@ -1126,6 +1139,9 @@ msgstr "Obrint menu CAM..."
 msgid "Can't open CAM menu!"
 msgstr "No puc obrir el men<65> de la CAM!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM en <20>s - reiniciar?"

--- a/po/cs_CZ.po
+++ b/po/cs_CZ.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2010-05-06 11:00+0200\n"
 "Last-Translator: Aleš Juřík <ajurik@quick.cz>\n"
 "Language-Team: Czech <vdr@linuxtv.org>\n"
@@ -22,6 +22,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Neplatný kanál ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanál není dostupný!"

@@ -1111,9 +1114,19 @@ msgstr "CAM přítomen"
 msgid "CAM ready"
 msgstr "CAM připraven"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menu"

@@ -1126,6 +1139,9 @@ msgstr "Otevírá se menu CAM..."
 msgid "Can't open CAM menu!"
 msgstr "Menu CAM není dostupné"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM se používá - opravdu restartovat?"

--- a/po/da_DK.po
+++ b/po/da_DK.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2007-08-12 14:17+0200\n"
 "Last-Translator: Mogens Elneff <mogens@elneff.dk>\n"
 "Language-Team: Danish <vdr@linuxtv.org>\n"
@@ -19,6 +19,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Ugyldig kanal! ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanal er ikke tilg<6C>ngelig!"

@@ -1108,9 +1111,19 @@ msgstr "CAM til stede"
 msgid "CAM ready"
 msgstr "CAM klar"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menu"

@@ -1123,6 +1136,9 @@ msgstr "
 msgid "Can't open CAM menu!"
 msgstr "Kan ikke <20>bne CAM menuen!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM er i brug - virkelig nulstille?"

--- a/po/de_DE.po
+++ b/po/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2010-01-16 16:46+0100\n"
 "Last-Translator: Klaus Schmidinger <vdr@tvdr.de>\n"
 "Language-Team: German <vdr@linuxtv.org>\n"
@@ -19,6 +19,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Ung<6E>ltiger Kanal ***"

+msgid "CAM activated!"
+msgstr "CAM aktiviert!"
+
 msgid "Channel not available!"
 msgstr "Kanal nicht verf<72>gbar!"

@@ -1108,9 +1111,19 @@ msgstr "CAM vorhanden"
 msgid "CAM ready"
 msgstr "CAM bereit"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr " (wird aktiviert)"
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr "Aktivierung abbrechen"
+
+msgid "Button$Activate"
+msgstr "Aktivieren"
+
 msgid "Button$Menu"
 msgstr "Men<65>"

@@ -1123,6 +1136,9 @@ msgstr "CAM-Men
 msgid "Can't open CAM menu!"
 msgstr "CAM-Men<65> kann nicht ge<67>ffnet werden!"

+msgid "Can't activate CAM!"
+msgstr "CAM kann nicht aktiviert werden!"
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM wird benutzt - wirklich zur<75>cksetzen?"

--- a/po/el_GR.po
+++ b/po/el_GR.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2007-08-12 14:17+0200\n"
 "Last-Translator: Dimitrios Dimitrakos <mail@dimitrios.de>\n"
 "Language-Team: Greek <vdr@linuxtv.org>\n"
@@ -19,6 +19,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "<22><> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>!"

@@ -1108,9 +1111,19 @@ msgstr ""
 msgid "CAM ready"
 msgstr ""

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "M<><4D><EFBFBD><EFBFBD>"

@@ -1123,6 +1136,9 @@ msgstr ""
 msgid "Can't open CAM menu!"
 msgstr "<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD> CAM <20><><EFBFBD><EFBFBD><EFBFBD>!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr ""

--- a/po/es_ES.po
+++ b/po/es_ES.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2008-03-02 19:02+0100\n"
 "Last-Translator: Luca Olivetti <luca@ventoso.org>\n"
 "Language-Team: Spanish <vdr@linuxtv.org>\n"
@@ -20,6 +20,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Canal no v<>lido ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "<22>Canal no disponible!"

@@ -1109,9 +1112,19 @@ msgstr "CAM presente"
 msgid "CAM ready"
 msgstr "CAM preparado"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Men<65>"

@@ -1124,6 +1137,9 @@ msgstr "Abriendo el men
 msgid "Can't open CAM menu!"
 msgstr "<22>No se puede abrir el men<65> CAM!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM en uso - <20>reiniciar?"

--- a/po/et_EE.po
+++ b/po/et_EE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2007-08-12 14:17+0200\n"
 "Last-Translator: Arthur Konovalov <artlov@gmail.com>\n"
 "Language-Team: Estonian <vdr@linuxtv.org>\n"
@@ -19,6 +19,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Vigane kanal ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanal ei ole kättesaadav!"

@@ -1108,9 +1111,19 @@ msgstr "CAM esitletud"
 msgid "CAM ready"
 msgstr "CAM töövalmis"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menüü"

@@ -1123,6 +1136,9 @@ msgstr "CAM-menüü avamine..."
 msgid "Can't open CAM menu!"
 msgstr "Ei saa avada CAM menüüd!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM on kasutuses - taaskäivitada?"

--- a/po/fi_FI.po
+++ b/po/fi_FI.po
@@ -11,7 +11,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2007-08-15 15:52+0200\n"
 "Last-Translator: Matti Lehtimäki <matti.lehtimaki@gmail.com>\n"
 "Language-Team: Finnish <vdr@linuxtv.org>\n"
@@ -23,6 +23,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Virheellinen kanavavalinta ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanava ei ole käytettävissä!"

@@ -1112,9 +1115,19 @@ msgstr "CAM havaittu"
 msgid "CAM ready"
 msgstr "CAM valmis"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Valikko"

@@ -1127,6 +1140,9 @@ msgstr "Avataan CA-moduulin valikkoa..."
 msgid "Can't open CAM menu!"
 msgstr "CA-moduulin valikko ei saatavilla"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CA-moduuli käytössä - nollataanko?"

--- a/po/fr_FR.po
+++ b/po/fr_FR.po
@@ -17,7 +17,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2013-02-24 12:56+0100\n"
 "Last-Translator: Dominique Plu <dplu@free.fr>\n"
 "Language-Team: French <vdr@linuxtv.org>\n"
@@ -29,6 +29,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Chaîne invalide ! ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Chaîne non disponible !"

@@ -1118,9 +1121,19 @@ msgstr "CAM présent"
 msgid "CAM ready"
 msgstr "CAM prêt"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menu"

@@ -1133,6 +1146,9 @@ msgstr "Ouverture du menu CAM..."
 msgid "Can't open CAM menu!"
 msgstr "Impossible d'ouvrir le menu CAM !"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM en cours d'utilisation - confirmer réinitialisation ?"

--- a/po/hr_HR.po
+++ b/po/hr_HR.po
@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2008-03-17 19:00+0100\n"
 "Last-Translator: Adrian Caval <anrxc@sysphere.org>\n"
 "Language-Team: Croatian <vdr@linuxtv.org>\n"
@@ -21,6 +21,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Neispravan Program ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Program nije dostupan!"

@@ -1110,9 +1113,19 @@ msgstr "CAM prisutan"
 msgid "CAM ready"
 msgstr "CAM spreman"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Izbornik"

@@ -1125,6 +1138,9 @@ msgstr "Otvaram CAM izbornik..."
 msgid "Can't open CAM menu!"
 msgstr "Otvaranje CAM izbornika neuspje<6A>no!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM se koristi - ponovno pokrenuti unato<74>?"

--- a/po/hu_HU.po
+++ b/po/hu_HU.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2013-03-01 19:22+0200\n"
 "Last-Translator: István Füley <ifuley@tigercomp.ro>\n"
 "Language-Team: Hungarian <vdr@linuxtv.org>\n"
@@ -23,6 +23,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Érvénytelen csatorna ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Az adó nem elérhető"

@@ -1112,9 +1115,19 @@ msgstr "CAM jelen"
 msgid "CAM ready"
 msgstr "CAM működik"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menü"

@@ -1127,6 +1140,9 @@ msgstr "A CAM menü nyitása..."
 msgid "Can't open CAM menu!"
 msgstr "A CAM menü nem nyitható"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM használatban - valóban újraindítjuk?"

--- a/po/it_IT.po
+++ b/po/it_IT.po
@@ -11,7 +11,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2015-01-19 20:19+0100\n"
 "Last-Translator: Diego Pierotto <vdr-italian@tiscali.it>\n"
 "Language-Team: Italian <vdr@linuxtv.org>\n"
@@ -26,6 +26,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Canale NON valido ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Canale non disponibile!"

@@ -1115,9 +1118,19 @@ msgstr "La CAM è presente"
 msgid "CAM ready"
 msgstr "La CAM è pronta"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "Accesso condizionato CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menu"

@@ -1130,6 +1143,9 @@ msgstr "Apertura menu CAM..."
 msgid "Can't open CAM menu!"
 msgstr "Impossibile aprire il menu CAM!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "La CAM è in uso - vuoi reimpostarla?"

--- a/po/lt_LT.po
+++ b/po/lt_LT.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2010-10-30 11:55+0200\n"
 "Last-Translator: Valdemaras Pipiras <varas@ambernet.lt>\n"
 "Language-Team: Lithuanian <vdr@linuxtv.org>\n"
@@ -19,6 +19,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Blogi kanalo nustatymai ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanalas neegzistuoja!"

@@ -1108,9 +1111,19 @@ msgstr "Dekodavimo modulis (CAM) įjungtas"
 msgid "CAM ready"
 msgstr "Dekodavimo modulis (CAM) paruoštas darbui"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "Dekodavimo modulis (CAM)"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Meniu"

@@ -1123,6 +1136,9 @@ msgstr "Atidaromas dekodavimo modulio meniu..."
 msgid "Can't open CAM menu!"
 msgstr "Negali atidaryti dekodavimo modulio meniu!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "Dekodavimo modulis šiuo metu naudojamas - tikrai perkrauti?"

--- a/po/mk_MK.po
+++ b/po/mk_MK.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2012-11-19 15:18+0100\n"
 "Last-Translator: Dimitar Petrovski <dimeptr@gmail.com>\n"
 "Language-Team: Macedonian <en@li.org>\n"
@@ -20,6 +20,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Невалиден Канал ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Каналот е недостапен!"

@@ -1109,9 +1112,19 @@ msgstr "CAM присутен"
 msgid "CAM ready"
 msgstr "CAM спремен"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Мени"

@@ -1124,6 +1137,9 @@ msgstr "Отварам CAM мени..."
 msgid "Can't open CAM menu!"
 msgstr "Неуспешно отварање на CAM менито!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM е во употреба - рестартирај?"

--- a/po/nl_NL.po
+++ b/po/nl_NL.po
@@ -12,7 +12,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2008-02-26 17:20+0100\n"
 "Last-Translator: Cedric Dewijs <cedric.dewijs@telfort.nl>\n"
 "Language-Team: Dutch <vdr@linuxtv.org>\n"
@@ -24,6 +24,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Ongeldig kanaal ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanaal niet beschikbaar"

@@ -1113,9 +1116,19 @@ msgstr "CAM aanwezig"
 msgid "CAM ready"
 msgstr "CAM gereed"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menu"

@@ -1128,6 +1141,9 @@ msgstr "CAM-menu wordt geopend..."
 msgid "Can't open CAM menu!"
 msgstr "Kan CAM-menu niet openen!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM wordt gebruikt - werkelijk herstarten?"

--- a/po/nn_NO.po
+++ b/po/nn_NO.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2007-08-12 14:17+0200\n"
 "Last-Translator: Truls Slevigen <truls@slevigen.no>\n"
 "Language-Team: Norwegian Nynorsk <vdr@linuxtv.org>\n"
@@ -20,6 +20,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Ugyldig Kanal! ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr ""

@@ -1109,9 +1112,19 @@ msgstr ""
 msgid "CAM ready"
 msgstr ""

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Meny"

@@ -1124,6 +1137,9 @@ msgstr ""
 msgid "Can't open CAM menu!"
 msgstr ""

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr ""

--- a/po/pl_PL.po
+++ b/po/pl_PL.po
@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2008-03-09 12:59+0100\n"
 "Last-Translator: Marek Nazarko <mnazarko@gmail.com>\n"
 "Language-Team: Polish <vdr@linuxtv.org>\n"
@@ -21,6 +21,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Niepoprawny kana<6E> ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kana<6E> nie jest dost<73>pny!"

@@ -1110,9 +1113,19 @@ msgstr "CAM obecny"
 msgid "CAM ready"
 msgstr "CAM gotowy"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menu"

@@ -1125,6 +1138,9 @@ msgstr "Otwieram menu CAM..."
 msgid "Can't open CAM menu!"
 msgstr "Nie mo<6D>na otworzy<7A> menu CAM!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM jest w u<>yciu - naprawd<77> zresetowa<77>?"

--- a/po/pt_PT.po
+++ b/po/pt_PT.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2010-03-28 22:49+0100\n"
 "Last-Translator: Cris Silva <hudokkow@gmail.com>\n"
 "Language-Team: Portuguese <vdr@linuxtv.org>\n"
@@ -20,6 +20,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Canal inv<6E>lido ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Canal indispon<6F>vel!"

@@ -1109,9 +1112,19 @@ msgstr "CAM presente"
 msgid "CAM ready"
 msgstr "CAM pronta"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menu"

@@ -1124,6 +1137,9 @@ msgstr "A abrir menu da CAM..."
 msgid "Can't open CAM menu!"
 msgstr "Imposs<73>vel abrir menu da CAM!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM em uso - reiniciar mesmo?"

--- a/po/ro_RO.po
+++ b/po/ro_RO.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2015-01-21 22:34+0100\n"
 "Last-Translator: Lucian Muresan <lucianm@users.sourceforge.net>\n"
 "Language-Team: Romanian <vdr@linuxtv.org>\n"
@@ -21,6 +21,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Canal invalid ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Canal indisponibil"

@@ -1110,9 +1113,19 @@ msgstr "CAM prezent"
 msgid "CAM ready"
 msgstr "CAM pregătit"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Meniu"

@@ -1125,6 +1138,9 @@ msgstr "Deschid meniul CAM..."
 msgid "Can't open CAM menu!"
 msgstr "Nu pot deschide meniul CAM"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM-ul este in folosinţă - totuşi resetez?"

--- a/po/ru_RU.po
+++ b/po/ru_RU.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2013-03-10 17:13+0100\n"
 "Last-Translator: Oleg Roitburd <oroitburd@gmail.com>\n"
 "Language-Team: Russian <vdr@linuxtv.org>\n"
@@ -20,6 +20,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "<22><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>!"

@@ -1109,9 +1112,19 @@ msgstr "CAM
 msgid "CAM ready"
 msgstr "CAM <20><><EFBFBD><EFBFBD><EFBFBD>"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "<22><><EFBFBD><EFBFBD>"

@@ -1124,6 +1137,9 @@ msgstr "
 msgid "Can't open CAM menu!"
 msgstr "<22><><EFBFBD><EFBFBD> CAM-<2D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> - <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>?"

--- a/po/sk_SK.po
+++ b/po/sk_SK.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2013-03-04 21:24+0100\n"
 "Last-Translator: Milan Hrala <hrala.milan@gmail.com>\n"
 "Language-Team: Slovak <vdr@linuxtv.org>\n"
@@ -19,6 +19,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Neplatn<74> kan<61>l ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kan<61>l nie je dostupn<70>!"

@@ -1108,9 +1111,19 @@ msgstr "CAM pr
 msgid "CAM ready"
 msgstr "CAM pripraven<65>"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM (modul podmienen<65>ho pr<70>stupu)"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Menu"

@@ -1123,6 +1136,9 @@ msgstr "Otv
 msgid "Can't open CAM menu!"
 msgstr "Menu CAM nie je dostupn<70>"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM sa pou<6F><75>va - naozaj re<72>tartova<76>?"

--- a/po/sl_SI.po
+++ b/po/sl_SI.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2013-03-04 12:46+0100\n"
 "Last-Translator: Matjaz Thaler <matjaz.thaler@guest.arnes.si>\n"
 "Language-Team: Slovenian <vdr@linuxtv.org>\n"
@@ -20,6 +20,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Neznan kanal ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanal ni razpolo<6C>ljiv!"

@@ -1109,9 +1112,19 @@ msgstr "CAM prisoten"
 msgid "CAM ready"
 msgstr "CAM pripravljen"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Meni"

@@ -1124,6 +1137,9 @@ msgstr "Odpiram CAM meni..."
 msgid "Can't open CAM menu!"
 msgstr "Ne morem odpreti CAM menija!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM je v uporabi - zares resetiraj?"

--- a/po/sr_RS.po
+++ b/po/sr_RS.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2013-03-16 15:05+0100\n"
 "Last-Translator: Zoran Turalija <zoran.turalija@gmail.com>\n"
 "Language-Team: Serbian <vdr@linuxtv.org>\n"
@@ -20,6 +20,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Neispravan Kanal ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanal nije dostupan!"

@@ -1109,9 +1112,19 @@ msgstr "CAM prisutan"
 msgid "CAM ready"
 msgstr "CAM spreman"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Meni"

@@ -1124,6 +1137,9 @@ msgstr "Otvaram CAM meni..."
 msgid "Can't open CAM menu!"
 msgstr "Otvaranje CAM menija neuspe<70>no!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM u upotrebi - stvarno ponovno pokrenuti?"

--- a/po/sv_SE.po
+++ b/po/sv_SE.po
@@ -11,7 +11,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2013-02-18 17:04+0100\n"
 "Last-Translator: Richard Lithvall <r-vdr@boomer.se>\n"
 "Language-Team: Swedish <vdr@linuxtv.org>\n"
@@ -23,6 +23,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Felaktig kanal ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanalen <20>r inte tillg<6C>nglig!"

@@ -1112,9 +1115,19 @@ msgstr "CAM n
 msgid "CAM ready"
 msgstr "CAM klar"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Meny"

@@ -1127,6 +1140,9 @@ msgstr "
 msgid "Can't open CAM menu!"
 msgstr "Det g<>r inte att <20>ppna CAM menyn!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM upptagen, vill du verkligen <20>terst<73>lla?"

--- a/po/tr_TR.po
+++ b/po/tr_TR.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2008-02-28 00:33+0100\n"
 "Last-Translator: Oktay Yolge<67>en <oktay_73@yahoo.de>\n"
 "Language-Team: Turkish <vdr@linuxtv.org>\n"
@@ -19,6 +19,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Ge<47>ersiz kanal ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Kanal kullan<61>lam<61>yor!"

@@ -1108,9 +1111,19 @@ msgstr "CAM mevcut"
 msgid "CAM ready"
 msgstr "CAM haz<61>r"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Men<65>"

@@ -1123,6 +1136,9 @@ msgstr "CAM men
 msgid "Can't open CAM menu!"
 msgstr "CAM men<65>s<EFBFBD> a<><61>lam<61>yor!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM kullan<61>l<EFBFBD>yor - ger<65>ekden s<>f<EFBFBD>rla?"

--- a/po/uk_UA.po
+++ b/po/uk_UA.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2013-02-09 16:00+0100\n"
 "Last-Translator: Yarema aka Knedlyk <yupadmin@gmail.com>\n"
 "Language-Team: Ukrainian <vdr@linuxtv.org>\n"
@@ -20,6 +20,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "*** Неправильний канал ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "Канал недоступний!"

@@ -1109,9 +1112,19 @@ msgstr "CAM присутній"
 msgid "CAM ready"
 msgstr "CAM готовий"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM (Умовний доступ)"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "Меню"

@@ -1124,6 +1137,9 @@ msgstr "Відкривання меню CAM-модуля..."
 msgid "Can't open CAM menu!"
 msgstr "Меню CAM-модуля недоступне!"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM використовується - дійсно перезапустити?"

--- a/po/zh_CN.po
+++ b/po/zh_CN.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 2.0.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2015-01-27 13:59+0100\n"
+"POT-Creation-Date: 2015-01-30 13:14+0100\n"
 "PO-Revision-Date: 2013-03-04 14:52+0800\n"
 "Last-Translator: NFVDR <nfvdr@live.com>\n"
 "Language-Team: Chinese (simplified) <nfvdr@live.com>\n"
@@ -21,6 +21,9 @@ msgstr ""
 msgid "*** Invalid Channel ***"
 msgstr "***无效的频道 ***"

+msgid "CAM activated!"
+msgstr ""
+
 msgid "Channel not available!"
 msgstr "频道不可用!"

@@ -1110,9 +1113,19 @@ msgstr "存在的CAM"
 msgid "CAM ready"
 msgstr "CAM准备"

+#. TRANSLATORS: note the leading blank!
+msgid " (activating)"
+msgstr ""
+
 msgid "CAM"
 msgstr "CAM设置"

+msgid "Button$Cancel activation"
+msgstr ""
+
+msgid "Button$Activate"
+msgstr ""
+
 msgid "Button$Menu"
 msgstr "菜单"

@@ -1125,6 +1138,9 @@ msgstr "打开CAM菜单..."
 msgid "Can't open CAM menu!"
 msgstr "不能打开CAM菜单"

+msgid "Can't activate CAM!"
+msgstr ""
+
 msgid "CAM is in use - really reset?"
 msgstr "CAM正在使用-是否重启？"