26 Commits

Author	SHA1	Message	Date
Klaus Schmidinger	797dc7d1a1	Version 2.1.5 ... VDR developer version 2.1.5 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.5.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.4-2.1.5.diff MD5 checksums: ce561eef64c13e24e4817f70a6d9d5b0 vdr-2.1.5.tar.bz2 f433e78d90bc414bd9d858ca6e58e539 vdr-2.1.4-2.1.5.diff WARNING: ======== This is a *developer* version. Even though *I* use it in my productive environment, I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Now checking whether the primary device actually has a decoder before retuning the current channel after a change in its parameters. This fixes broken recordings on the primary device on "headless" systems. - Increased MIN_TS_PACKETS_FOR_FRAME_DETECTOR to 100 and introduced counting the number of actual video TS packets in cTsPayload in order to be able to record channels that sometimes need even more than 10 TS packets for detecting frame borders (reported by Oliver Endriss). - Fixed sorting recordings by time in the Recordings menu if "Setup/OSD/Recording directories" is set to "no". - Fixed clearing non-editable members in the channel editor (thanks to Rolf Ahrenberg). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Further clarified the semantics of cCamSlot::Decrypt(). - Fixed flickering if subtitles are active while the OSD demo is running. - Fixed numbering frames. Previously they were numbered starting from 1, while it is apparently standard to number them from 0. Any existing recordings with editing marks (which will now be off by one) can still be cut with all VDR versions from 1.7.32, because these will automatically adjust editing marks to I-frames. Users of stable releases shouldn't notice any problems. - Fixed a possible crash in the OSD demo (reported by Christopher Reimer). - Fixed some compiler warnings with Clang 3.4.1 (reported by Paul Menzel). - Added LinkageTypePremiere to libsi/si.h and eit.c to avoid a compiler warning with Clang 3.4.1 (suggested by Tony Houghten). - Replaced the NULL pointer assignment in ~cReceiver() to force a segfault with a call to abort() (suggested by Tony Houghten). - Fixed learning keyboard remote control codes (thanks to Lars Hanisch). - Improved PAT/PMT scanning to speed up initial tuning to encrypted channels on transponders with many PAT entries (reported by Mariusz Bialonczyk). - Fixed the replay progress display for very long recordings. - Fixed detecting broken video data streams when recording. - Fixed handling frame detection buffer length (reported by Eike Sauer).	2014-03-05 23:20:34 +01:00
Klaus Schmidinger	67e322b0dd	Version 2.1.4 ... VDR developer version 2.1.4 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.4.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.3-2.1.4.diff MD5 checksums: e1018c13dc257c986e0e30494913b415 vdr-2.1.4.tar.bz2 870f6f03f4697d136c886358c3be4277 vdr-2.1.3-2.1.4.diff WARNING: ======== This is a *developer* version. Even though *I* use it in my productive environment, I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Updated 'sources.conf' (thanks to Antti Hartikainen). - cFont::CreateFont() now returns a dummy font in case there are no fonts installed. This prevents a crash with the LCARS skin on a system that has no fonts. - Improved locking for CAM slots and made the pure functions of cCiAdapter have default implementations, to fix a possible crash with CI adapters and CAM slots that are implemented in a plugin. - Added logging the supported system ids of a CAM. - Increased MIN_TS_PACKETS_FOR_FRAME_DETECTOR to 10 in order to be able to record channels that need more than 5 TS packets for detecting frame borders (reported by Eike Sauer). - Fixed deleting the source recording after moving it to a different volume (reported by Christoph Haubrich). - Now waiting explicitly until all CAM slots are ready before switching to the initial channel when VDR is started. This is necessary in case CI adapters are used that are not physically connected to a dedicated device. The respective checks in cDvbDevice have been removed to avoid redundancy. - Fixed detecting frame borders in MPEG-2 streams that have "bottom fields" or varying GOP structures (reported by Christian Paulick, with help from Helmut Auer). - Now unassigning CAMs from their devices when they are no longer used. - Now making sure the primary device goes into transfer mode for live viewing if the CAM wants to receive the TS data. - Fixed a wrong alignment in cCiDateTime::SendDateTime(). - Since the new cRecordingsHandler that was introduced in version 2.1.2 not only handles "cutting", but also "moving" and "copying" recordings, the German word "Schnitt" has been replaced with the more generic "Bearbeitung", which covers all three variations of "editing" a recording (suggested by Christoph Haubrich). Maintainers of translations for other languages may want to change their *.po files accordingly. - The new function cStatus::ChannelChange() can be implemented by plugins to be informed about changes to the parameters of a channel that may require a retune. This may, for instance, be useful for plugins that implement live streaming, so that they can react on changes to a channel's PIDs or CA descriptors (problem reported by Mariusz Bialonczyk). - Fixed a superfluous call to the skin's SetRecording() function after renaming a recording (reported by Christoph Haubrich).	2014-01-26 23:55:34 +01:00
Klaus Schmidinger	716c03a47e	Version 2.1.3 ... VDR developer version 2.1.3 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.3.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.2-2.1.3.diff MD5 checksums: 054f80e0045aa6fad118e9285b52f4f2 vdr-2.1.3.tar.bz2 3c5ab05d5c4d0b984b34e84190e80949 vdr-2.1.2-2.1.3.diff WARNING: ======== This is a *developer* version. Even though *I* use it in my productive environment, I strongly recommend that you only use it under controlled conditions and for testing and debugging. Originally I intended to release this version only after the new DiSEqC configuration dialog was finished. But in the meantime quite a few other things have come up, so I decided to postpone that dialog and first release what has piled up so far. From the HISTORY file: - Changed the return value of cPositioner::HorizonLongitude() to 0 in case the latitude of the antenna location is beyond +/-81 degrees. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed some compiler warnings with gcc-4.6.3 (thanks to Rolf Ahrenberg). - Changed the name of the SVDRP command RENR to MOVR (suggested by Rolf Ahrenberg). - When cutting a recording it is now checked whether there is already an edited version of this recording (with the same name, but starting with '%'), and the user is prompted for confirmation to overwrite it (suggested by Rolf Ahrenberg). - Revoked "Added maximum signal strength value for TechniSat SkyStar 2 DVB-S rev 2.3P" because it broke things for the "TechniSat AirStar 2" DVB-T card. - The LIRC remote control now connects to the socket even if it doesn't yet exist when VDR is started (thanks to Lars Hanisch). - Changed the absolute latitude limit for visible satellites to 81.2 degrees. - Added code for parsing LCN and AVC descriptors to libsi (thanks to Rolf Ahrenberg). - In the "Select folder" menu pressing Ok now selects the folder, even if this is a folder that contains sub folders (marked with "..."). To open such a folder you can press the Red key. - Fixed a possible access to uninitialized data in cEIT::cEIT() (reported by Dominik Strasser). - The new menu category mcRecordingEdit is now used to mark menus that edit recording properties (suggested by Stefan Braun). - Changes in the teletext PID no longer cause retuning (and thus interrupting a recording). - Removed '_' from the FileNameChars and CharMap translations in uk_UA.po. - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed a missing initialization in the c'tor of cSkinLCARSDisplayChannel (thanks to Marko Mäkelä). - Simplified some conditional expressions in skinlcars.c and skinsttng.c (suggested by Marko Mäkelä). - Fixed uninitialized item area coordinates in cSkinLCARSDisplayMenu (reported by Marko Mäkelä). - Fixed a possible crash if the recordings list is updated externally while the Recordings menu is open (reported by Lars Hanisch). - Added a missing closing ')' in the help and man page entry of the --vfat option (reported by Lars Hanisch). - Fixed setting the name of the video directory to avoid a crash when using --genindex, and also to use the correct directory with --edit (the latter reported by Marko Mäkelä). - The Recordings menu can now be called with a cRecordingFilter, which allows the caller to have it display only a certain subset of the recordings (thanks to Lars Hanisch). - Added handling UTF-8 'umlaut' characters to cKbdRemote (thanks to Lars Hanisch). - Made it clear that the Data parameter in cDevice::StillPicture() may point to a series of packets, not just a single one (thanks to Thomas Reufer). - cDevice::TrickSpeed() now has an additional parameter named Forward, which indicates the direction in which replay is being done (suggested by Thomas Reufer). This information may be necessary for some output devices in order to properly implement trick modes. Authors of plugins that implement output devices will need to add this parameter to their derived cDevice class, regardless of whether they will make use of it or not. - Added a note to ePlayMode in device.h that VDR itself always uses pmAudioVideo when replaying a recording (suggested by Thomas Reufer). - Fixed some spellings in positioner.h and Doxyfile (thanks to Ville Skyttä). - Changed '%a' to the POSIX compliant '%m' in all scanf() calls (thanks to Ville Skyttä). - The new function cCamSlot::Decrypt() can be used by derived classes to implement a CAM slot that can be freely assigned to any device, without being directly inserted into the full TS data stream in hardware. A derived class that implements Decrypt() will also need to set the new parameter ReceiveCaPids in the call to the cCamSlot base class constructor to true, in order to receive the CA pid TS packets that contain data necessary for decrypting. - Many member functions of cCamSlot have been made virtual to allow for easier implementation of derived classes. - cTSBuffer now provides the number of available bytes in its Get() function. - cDvbDevice::GetTSPacket() now calls CamSlot()->Decrypt() in order to allow CAM slots that can be freely assigned to any device access to the TS data stream. - Added a check to avoid a possible NULL pointer dereference in cCiSession::SendData() (reported by Ville Skyttä). - Deleted a superfluous assignment in cPipe::Open() (reported by Ville Skyttä). - The script given to VDR with the '-r' option is now also called after the recording process has actually started (thanks to Christian Kaiser). - Avoiding unnecessary pkg-config warnings in plugin Makefiles (thanks to Ville Skyttä). Plugin authors may want to apply the following change to their Makefile: -PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell pkg-config --variable=$(1) vdr || pkg-config --variable=$(1) ../../../vdr.pc)) +PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell PKG_CONFIG_PATH="$$PKG_CONFIG_PATH:../../.." pkg-config --variable=$(1) vdr)) - Eliminated MAXDVBDEVICES (suggested by Oliver Endriss). - Channels that are no longer contained in the current SDT of a transponder are now marked with the keyword OBSOLETE in their name and provider fields. That way you can identify obsolete channels when you switch to them, and you can get the complete overview of all obsolete channels by sorting the Channels list by provider (by pressing the 0 key twice). Automatic deletion of obsolete channels may follow later.	2014-01-06 18:37:32 +01:00
Klaus Schmidinger	277d66bfe1	Version 2.1.2 ... VDR developer version 2.1.2 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.2.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.1-2.1.2.diff MD5 checksums: 4725e9cb26fea8fa3682dd30f5594a50 vdr-2.1.2.tar.bz2 869d9b298b432a505186328bcf0b53c6 vdr-2.1.1-2.1.2.diff WARNING: ======== This is a *developer* version. Even though *I* use it in my productive environment, I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed displaying DVB subtitles (thanks to Rolf Ahrenberg for helping to debug and understand subtitle page refreshes): + Fixed handling DVB subtitle fill region codes for 2 and 8 bpp. + Fixed handling pages without an explicit END_OF_DISPLAY_SET_SEGMENT. The FINISHPAGE_HACK is no longer necessary. + Fixed handling "page refreshes". The data is now parsed and stored closer to the DVB standard specs, introducing "object refs" and "region refs". + The debug output now goes into an HTML file named dbg-log.htm and shows the actual bitmaps (dbg-nnn.jpg) used to display the subtitles. That way it is much easier to see what's actually going on. + Fixed handling subtitles encoded as a string of characters (the very first character was always skipped). - Fixed wrong initialization of Setup.PositionerSwing (reported by Arthur Konovalov). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cleaning up old EPG events in case no epg data file is given (reported by Dave Pickles). - Unified the internal sequence of actions when pressing the Blue and the Back key, respectively, during replay (reported by Thomas Maass). - The Yellow button in the main menu no longer acts as "Pause" if "Pause key handling" is set to "do not pause live video" (suggested by Ulf Kiener). - The code for distributing recordings over several video directories has been removed. VDR now by default assumes that the video directory is one big disk. If you absolutely need to use several separate disks to store recordings, you can write a plugin that uses the new cVideoDirectory API to implement the necessary functionality (see PLUGINS.html, section "The video directory"). You can copy the respective code from previous versions of videodir.c. IMPORTANT NOTE: If you write a plugin that implements a distributed video directory, =============== be sure to make cVideoDirectory::Rename() follow symbolic links! This functionality was never implemented in VDR and it therefore used a workaround in cutter.c. See the section marked with // XXX this can be removed once RenameVideoFile() follows symlinks in previous versions of cutter.c. + CloseVideoFile() is obsolete and has been removed. + The functions OpenVideoFile(), RenameVideoFile(), RemoveVideoFile(), VideoFileSpaceAvailable(), VideoDiskSpace(), RemoveEmptyVideoDirectories(), IsOnVideoDirectoryFileSystem() and PrefixVideoFileName() are now static members of cVideoDirectory and need to be called with the proper prefix. + The name of the video directory is now available through cVideoDirectory::Name(). - Added renaming and moving recordings and folders, editing a recording's priority and lifetime, and queueing cutting jobs (inspired by the "extrecmenu" plugin from Martin Prochnow). + The "Recording info" menu now has a new Blue button named "Edit", which opens a dialog in which several properties of the selected recording can be changed. It can be renamed or moved into another folder and its priority and lifetime can be modified (inspired by the "extrecmenu" plugin from Martin Prochnow). The new blue "Edit" button in the "Recordings" menu opens a dialog in which a folder can be renamed or moved. See MANUAL, section "Managing folders". + In the "Edit recording" menu the Yellow button ("Delete marks") allows you to delete all editing marks of the selected recording. + cCutter is no longer a static class. Cutting requests should now be invoked by calling RecordingsHandler.Add(ruCut, FileName). See the new cRecordingsHandler class in recording.h. + Cutting jobs are now placed in a queue (together with any move or copy jobs) and are processed one by one. + The new SVDRP command RENR can be used to rename a recording (suggested by Rolf Ahrenberg). + Note that in several places in the source code a "copy" operation is mentioned, however there is no user interface for this, yet. - Changed some variable names in positioner.c to match the names used in the page with the explanation on vdr-portal.de. - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed writing group separators to channels.conf that contain a comma (reported by Eike Edener). - Now also checking the source (in addition to the transponder) when setting the system time from the TDT, which avoids problems in case devices are tuned to the same transponder on different sources, and these broadcast different time data (reported by Torsten Lang). - Changed cRecorder::Action() to use cTimeMs instead of time() to avoid problems with unjustified "video data stream broken" errors in case the system time is changed while a recording is active (reported by Torsten Lang). - Revised the section on "Learning the remote control keys" in the INSTALL file to avoid the impression that there actually is a default remote.conf file, and to not use any alphabetic keys for special functions, so that they remain available for textual input. - The function cRecordings::MBperMinute() now only takes into account recordings with less than 5 seconds per megabyte, in an attempt to filter out radio recordings (thanks to Harald Koenig). The result of this function was way off any realistic value in case there are many radio recordings in the video directory. - Added maximum signal strength value for TechniSat SkyStar 2 DVB-S rev 2.3P (thanks to Guido Cordaro). - Fixed an inconsistent behavior between opening the Recordings menu manually via the main menu and by pressing the Recordings key. In the latter case it automatically opened all sub folders to position the cursor to the last replayed recording, which is unexpected at this point (reported by Helmut Auer). You can still navigate to the last replayed recording (if any) by pressing Ok repeatedly in the Recordings menu.	2013-10-19 19:27:37 +02:00
Klaus Schmidinger	5076cfb2ed	Version 2.1.1 ... VDR developer version 2.1.1 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.1.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.0.0-2.1.1.diff MD5 checksums: b17f9838bb8ddee9620f838fea7a171d vdr-2.1.1.tar.bz2 8b8ca593885c380cd370e6d19a5b16a1 vdr-2.0.0-2.1.1.diff WARNING: ======== This is a *developer* version. Even though *I* use it in my productive environment, I strongly recommend that you only use it under controlled conditions and for testing and debugging. The main focus of this version is on adding basic support for positioners to control steerable satellite dishes. Manually controlling the dish position and storing individual positions will follow later. The fixes contained in this version will be released in a stable version 2.0.3 later, if there are no problems. From the HISTORY file: - Fixed initializing cDevice::keepTracks. - Fixed an endless loop in cTextWrapper::Set() in case the given Width is smaller than one character (reported by Stefan Braun). - Removed all "modified since version 1.6" markers from PLUGINS.html. - Added definitions for older DVB API versions, back until 5.0 (based on a patch from Udo Richter). - Changed cThread::SetIOPriority() from "best effort class" to "idle class" in order to improve overall performance when an editing process is running (thanks to Jochen Dolze). - Fixed handling '/' and '~' in recording file names in case DirectoryEncoding is used (thanks to Lars Hanisch). - Changed the sign of the satellite position value in cSource to reflect the standard of western values being negative. The new member function cSource::Position() can be used to retrieve the orbital position of a satellite. - Fixed multiple occurrences of the same directory in the recordings list in case there are directories that only differ in non-alphanumeric characters (was broken by "Fixed selecting the last replayed recording in the Recordings menu in case there are folders and plain recordings with names that differ only in non-alphanumeric characters" in version 1.7.36). - Fixed displaying the frame number when setting an editing mark (thanks to Thomas Günther). - Fixed no longer generating any editing marks if the edited recording results in just one single sequence (reported by Halim Sahin). - Fixed an error message when parsing SCR values in diseqc.conf. - Fixed an unexpected RCS version tag in the newplugin script. - Fixed an endless loop in the DrawEllipse() functions for very small ellipses (reported by Stefan Braun). - Fixed a crash in the LCARS skin's main menu in case there is no current channel (reported by Dominique Dumont). - Added basic support for positioners to control steerable satellite dishes (based on a patch from Seppo Ingalsuo and Ales Jurik). + Supports GotoN (aka "DiSEqC 1.2") and GotoX (aka "USALS"). + The new DiSEqC command code 'P' can be used to instruct a positioner to move the dish to the required satellite position. When a 'P' code is processed, further execution of the remaining DiSEqC sequence (if any) is postponed until the positioner has reached the new satellite position. + The new special source value of "S360E" can be used in diseqc.conf to indicate that an entry using a positioner can move the dish to any requested position within its range. Think of it as "full circle". + The devices a particular cDiseqc or cScr applies to are now stored directly in each cDiseqc or cScr, respectively. + A plugin can implement a custom positioner control (see PLUGINS.html, section "Positioners"). + The new function cSkinDisplayChannel::SetPositioner() can be implemented by skins to show the user a progress display when the dish is being moved. The default implementation calls SetMessage() with a string indicating the new position the dish is being moved to. The LCARS skin shows a progress bar indicating the movement of the dish. + The new parameters "Site latitude", "Site longitude", "Positioner speed", and "Positioner swing" in the "Setup/LNB" menu can be used to configure the necessary values for a steerable dish. + The cDvbTuner now has a new status tsPositioning, in which it waits until a steerable dish has reached its target position. Parsing SI data is paused until the target position has been reached. - The LCARS skin now shows the source value of the current channel in its channel display. - Fixed asserting free disk space in the cutter. - No longer trying to delete old recordings in AssertFreeDiskSpace() if the given Priority is less than 1. - Fixed handling LIRC events in case repeated events are lost. - Fixed a possible crash when shutting down VDR while subtitles are being displayed (reported by Ville Skyttä). - cDevice::IsPrimaryDevice() now also checks whether the primary device actually has a decoder and returns false otherwise. This should improve device allocation on systems that are only used as a receiver and don't actually display anything. - Increased the value of MAXRETRIES to 20 to reduce the probability of disturbances in transfer mode. - All bonded devices (except for the master) now turn off their LNB power completely to avoid problems when receiving vertically polarized transponders (suggested by Manfred Völkel and Oliver Endriss). - Reverted the change from version 1.5.7 that made all logging go to LOG_ERR (thanks to Christopher Reimer). - Added Begin/EndSegmentTransfer() to the EPG handler interface (thanks to Jörg Wendel). - The code for distributing recordings over several video directories is now deprecated and disabled by default. You can re-enable this feature by removing the comment sign ('//') from the beginning of the line //#define DEPRECATED_DISTRIBUTED_VIDEODIR // Code enclosed with this macro is ... in the file videodir.c. Note, though, that this can only be a temporary workaround. This feature will be completely removed in one of the next developer versions. Distributing the video directory over several disks was a useful feature in times when disks were still relatively small, but it also caused serious problems in case one of the disks failed. Nowadays hard disks come in sizes measured in terabytes, and tools like "mhddfs" can be used to combine several disks to form one large volume. A recommended method for a relatively safe disk setup in a VDR system is to use two 1TB (or larger) disks and use them as a RAID-1 (mirrored). That way, if one disk fails, you can replace it without data loss.	2013-08-25 18:40:45 +02:00
Klaus Schmidinger	8bc7a314cc	Version 2.0.1 ... VDR version 2.0.1 is now available at ftp://ftp.tvdr.de/vdr/vdr-2.0.1.tar.bz2 A 'diff' against the previous developer version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.0.0-2.0.1.diff MD5 checksums: e1b7a76c57c96300829dccd39eb20e7d vdr-2.0.1.tar.bz2 fca54c4da4e9d9dd05f917b04a2eecf4 vdr-2.0.0-2.0.1.diff This version fixes a few minor bugs that came up after the release of version 2.0.0. It also allows compilation of VDR with older versions of the DVB API. From the HISTORY file: - Fixed initializing cDevice::keepTracks. - Fixed an endless loop in cTextWrapper::Set() in case the given Width is smaller than one character (reported by Stefan Braun). - Added definitions for older DVB API versions, back until 5.0 (based on a patch from Udo Richter). - Fixed handling '/' and '~' in recording file names in case DirectoryEncoding is used (thanks to Lars Hanisch). - Changed cThread::SetIOPriority() from "best effort class" to "idle class" in order to improve overall performance when an editing process is running (thanks to Jochen Dolze).	2013-04-13 21:57:40 +02:00
Klaus Schmidinger	23a677c66e	Version 2.0.0 ... VDR version 2.0.0 is now available at ftp://ftp.tvdr.de/vdr/vdr-2.0.0.tar.bz2 A 'diff' against the previous developer version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.42-2.0.0.diff MD5 checksums: fd7f481b996e03fae3c00e80b6b0d301 vdr-2.0.0.tar.bz2 db1fc075c567bf75c566de6ce3cb4a0b vdr-1.7.42-2.0.0.diff A summary of all the major changes since the last stable version 1.6.0 can be found at http://www.tvdr.de/changelog.htm When updating from an earlier version of VDR please make sure you read the INSTALL and MANUAL files that come with the VDR source before doing so! Please make sure you have backup copies of all your configuration files, and verify carefully that your timers will be set to the correct channels after switching to this new version. Thanks to the many people who have contributed in the making, testing and debugging of this new version of VDR. Please also visit the newly refurbished VDR homepage at http://www.tvdr.de and VDR's new facebook page at https://www.facebook.com/VideoDiskRecorder From the HISTORY file: - Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras). - Fixed the description of the 'M' parameter of channel definitions in vdr.5. - Updated the French OSD texts (thanks to Dominique Plu). - Fixed handling overlapping pending timers (reported by Matthias Senzel). - Bumped all version numbers to 2.0.0. - Official release.	2013-03-31 13:32:01 +02:00
Klaus Schmidinger	b8b6cd3e89	Version 1.7.39 ... VDR developer version 1.7.39 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.39.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.38-1.7.39.diff MD5 checksums: 3f0681f4aa6bd8deffc8208c40d34d2d vdr-1.7.39.tar.bz2 1c13a683694c6c3c52444c1689477876 vdr-1.7.38-1.7.39.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. Approaching version 2.0.0: ========================== If all goes well, there will be just one more developer version after this one, and then it's going to be version 2.0.0. From the HISTORY file: - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Updated the Polish OSD texts (thanks to Marek Nazarko). - Modified handling user inactivity in the shutdown handler to avoid a problem in case the system time is changed after VDR has been started (thanks to Udo Richter, reported by Sören Moch). - Updated the Czech OSD texts (thanks to Ales Jurik). - Changed the template for PLGCFG to $(CONFDIR)/plugins.mk (thanks to Ville Skyttä). - Updated the Swedish OSD texts (thanks to Richard Lithvall). - Now clearing device bondings for devices that don't provide DVB-S in the Setup/LNB menu (reported by Juergen Lock). - Fixed a possible deadlock in handling the tuners of bonded devices (thanks to Juergen Lock). - Improved working around the broken driver values for SNR in case of a "TT-budget S2-3200" receiving DVB-S2. - The demos in the "osddemo" plugin can now also be ended with the "Back" key. - Fixed flashing OSD in "high level OSD" mode of the TT S2-6400 in case a menu is open while subtitles are being displayed. - Fixed stuttering or asynchronous audio after changing the audio track. This is done by doing a "jump" to the current position, which clears all buffers. However, this only works with TS recordings. With PES recordings it causes a segfault - haven't been able to figure out why. - Added a manual page for 'svdrpsend' (thanks to Tobias Grimm). - Fixed immediately disappearing subtitle track menu in "high level OSD" mode of the TT S2-6400 when selecting "No subtitles". - Updated the French OSD texts (thanks to Bernard Jaulin). - Updated the Dutch OSD texts (thanks to Carel Willemse). - Removed all "fuzzy" translations from the files ar.po, hu_HU.po and sr_SR.po, because more often than not they are just wrong. - Now calling DeviceClear() in cTransfer::Receive() if the output device blocks, instead of not retrying for 10 seconds (reported by Andreas Mair, with help from Oliver Endriss). - Updated the Spanish OSD texts (thanks to Luca Olivetti). - Updated the Hungarian language texts (thanks to István Füley). - Changed the calls to Skins.QueueMessage() in vdr.c that are related to reporting the status of the editing process back to Skins.Message() in order to have them appear immediately. - When sorting recordings by name, folders are now always at the top of the list. - Updated the Russian OSD texts (thanks to Oleg Roitburd).	2013-03-10 16:37:38 +01:00
Klaus Schmidinger	4c59501a6b	Version 1.7.38 ... VDR developer version 1.7.38 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.38.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.37-1.7.38.diff MD5 checksums: f4ef0f60ed662f3c983a830da67df9b2 vdr-1.7.38.tar.bz2 e945b0f44e13ed768de726cf6e66317c vdr-1.7.37-1.7.38.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. Approaching version 2.0.0: ========================== If all goes well, there should be no more functional or API changes before the final version 2.0.0. There will just be a few more fixes. From the HISTORY file: - Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Updated the French OSD texts (thanks to Marc Perrudin, Bernard Jaulini and Peter Münster). - Updated the Macedonian OSD texts (thanks to Dimitar Petrovski). - Fixed moving editing marks, so that they don't get overwritten with old values through an update of the marks file. - Removed an invalid line from channels.conf.terr (reported by Lars Hanisch). - Fixed an unexpected k_Repeat key event after a k_Release in lirc.c. - Fixed permissions of po/sr_SR.po (reported by Dominic Evans). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed using "Pause" and "Slow motion" near the end of a recording (replay stopped a few seconds after the end of the recording file has been reached). - Fixed selecting the last replayed recording in the Recordings menu in case there are folders and plain recordings with names that differ only in non-alphanumeric characters (reported by Andre Weidemann). - Fixed the description of the OSD drawing functions DrawEllipse() (the values -5...-8 for the Quadrants parameter are not implemented). - Made cOsd::DestroyPixmap() "NULL proof". - Now deleting any previously allocated pixmaps in cOsd::SetAreas(). - Added demos of the DrawEllipse() and DrawSlope() function to the 'osddemo' plugin (press '1' or '2', respectively). - Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras). - The timeout for trying to switch to a valid programme is now reset immediately once a programme has been found. - No longer checking for EOPNOTSUPP in cDvbTuner::GetSignalQuality() to avoid breaking this function in case the driver suddenly decides to return a different errno value if an operation is not supported. - Moved the definition of TIMERMACRO_TITLE and TIMERMACRO_EPISODE from recording.h to config.h and using them to initialize Setup.NameInstantRecord (avoids having the same information in two places). - Fixed the return value of cOsdProvider::StoreImage() in case there is no OSD provider. - Fixed a crash in cMenuEditChanItem::Set() when entering a channel number that doesn't exist (reported by Mikael Hübsch). - Fixed displaying pending timers in "alert" mode in the LCARS skin. - Added missing $(LDFLAGS) to the Makefile of the dvbhddevice plugin (thanks to Ville Skyttä). - Fixed some spellings in PLUGINS.html and Doxyfile (thanks to Ville Skyttä). - Added '-p' to the cp command in the install-conf target of the Makefile (thanks to Ville Skyttä). - Added missing 'const' to cDevice::HasProgramme() and cDevice::HasLock(). - Fixed determining the priority of the primary device in case it is neither replaying nor receiving a live channel (thanks to Matthias Senzel for reporting a problem with switching back to live viewing after replay in a setup with device bonding). - Removed all \return and \param tags from comment lines marked with "///<" for Doxygen. There was only a rather small number of these, and I would probably always forget to put them in place when writing future comments, so I decided to drop them entirely. - Added Doxyfile.filter to have special characters escaped that would otherwise be dropped by Doxygen (reported by Ville Skyttä). - Using 'cat' instead of 'cp' to copy the Doxyfile to avoid problems in case Doxyfile is write protected. - Updated the Doxyfile with a newer version of Doxygen. - Turned off following symlinks in the Doxyfile. - Removed trailing whitespace. - Expanded tabs in PLUGINS/src/dvbhddevice/setup.c. - Some formatting fixes.	2013-02-17 18:11:16 +01:00
Klaus Schmidinger	14bd32b948	Version 1.7.37 ... VDR developer version 1.7.37 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.37.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.36-1.7.37.diff MD5 checksums: 602dc7e678bcfcf075da36344a337562 vdr-1.7.37.tar.bz2 34e953fcffc112f316cbfc1f53915324 vdr-1.7.36-1.7.37.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. Approaching version 2.0.0: ========================== If all goes well, there should be no more functional or API changes before the final version 2.0.0. There will just be a few more fixes. From the HISTORY file: - Now also using FindHeader() in cMpeg2Fixer::AdjTref() (pointed out by Sören Moch). - Added missing template for DVBDIR to Make.config.template (reported by Derek Kelly). - The LCARS menu now also works if the OSD has only 1bpp (two colors). - Fixed possible garbage in the remaining time of the LCARS replay display in case the hours change from two to one digit. - Fixed upscaling bitmaps. The last row and column of the scaled bitmap was not filled, which resulted in empty lines between scaled subtitles. - Fixed a leftover line in case a two line subtitle was followed by a one line subtitle on the dvbhddevice in "high level" OSD mode. - Returning 0 from cDvbSdFfDevice::NumProvidedSystems() if option --outputonly is given. - The index file is now closed after initially reading it if it is older than 3600 seconds. - Improved responsiveness during replay when close to the recording's end. - Fixed a leftover progress display in the LCARS main menu when replay of a recording ends while the menu is open, and the live channel has no EPG information. - Fixed possible audio chatter when a recording is replayed to its very end. - Added dependency on 'i18n' to 'install-i18n' in the VDR Makefile (thanks to Tobias Grimm). - Changed several calls to Skins.Message() in vdr.c to Skins.QueueMessage() in order to avoid a black screen while such a message is displayed in case the channel will be switched (reported by Uwe Scheffler). - Updated the Slovakian language texts (thanks to Milan Hrala). - Improved LIRC timing for repeat function. - When pausing live video, the current audio and subtitle tracks are now retained. - Added some notes about plugin Makefiles to PLUGINS.html. - Avoiding an extra key press event if the repeat function kicks in when controlling VDR via the PC keyboard. - The new options "Setup/Miscellaneous/Remote control repeat delay" and "Setup/Miscellaneous/Remote control repeat delta" can be used to adjust the behavior of the remote control in case a key is held pressed down for a while, so that the repeat function kicks in (see MANUAL). The builtin LIRC and KBD remote controls already use these parameters. It is recommended that plugins that implement an interface to any kind of remote controls also use the parameters Setup.RcRepeatDelay and Setup.RcRepeatDelta for the desired purpose, and remove any setup options they might have that serve the same purpose. - cTimer no longer does any special "VFAT" handling to shorten directory names to 40 characters. When a string is used as a directory name for a recording, the maximum length of the directory path, as well as the individual directory names, is now limited to the values specified by the new command line option --dirnames (see man vdr(1) for details). For backwards compatibility the option --vfat is still available and has the same effect as --dirnames=250,40,1. - The macro MaxFileName is now obsolete and may be removed in future versions. Use NAME_MAX directly instead. - There is no more fixed limit to the maximum number of cPixmap objects an OSD can create. However, a particular device may still be unable to create an arbitrary number of pixmaps, due to limited resources. So it's always a good idea to use as few pixmaps as possible. - Fixed formatting and removed some superfluous break statements in vdr.c's command line option switch.	2013-02-09 18:56:41 +01:00
Klaus Schmidinger	889f7deeb4	Version 1.7.36 ... VDR developer version 1.7.36 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.36.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.35-1.7.36.diff MD5 checksums: e514f72a2a8c44f39e47b540d6ad325f vdr-1.7.36.tar.bz2 9312a0d10bcda87d3c3c7e6dfbebcd05 vdr-1.7.35-1.7.36.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Added maximum SNR value for PCTV Systems nanoStick T2 290e (thanks to Antti Hartikainen). - Added a remark indicating that the coordinates of Rect in a call to cDevice::CanScaleVideo() are in the range of the width and height returned by GetOsdSize() (suggested by Reinhard Nissl). - Modified the Makefiles (thanks to Christopher Reimer). By default VDR is now built according to the FHS ("File system Hierarchy Standard"), and a plain "make" in the VDR source directory just builds everything, but doesn't copy it to ./PLUGINS/lib and ./locale any more. You can use a Make.config file (copied from Make.config.template) and set the parameter LCLBLD=1 to have everything built and installed under the VDR source tree (as was the default in previous versions). If you already have your own Make.config file, you may want to copy the new Make.config.template and adapt it to your needs. If you don't want VDR's data files to be spread around your system according to the FHS, you can set the parameter ONEDIR=1 (using Make.config) to have all files in one /video directory as before. - Fixed the example for cReceiver in PLUGINS.html. - Fixed sorting recordings in case two folders have the same name, but one of them ends in an additional digit, as in "abc" and "abc2" (reported by Andreas Mair). - Added "repeat" function when using the keyboard to control VDR (thanks to Reinhard Nissl). - The SVDRP command LSTR now knows the additional parameter "path", which can be given to get the actual file name of a recording's directory (suggested by Stefan Stolz). - Fixed multiple occurrences of the same directory in the recordings list in case there are directories that only differ in non-alphanumeric characters (reported by Andreas Mair). - Absolute jumps when replaying a recording (via the Red key) are now only performed if an actual value has been entered (suggested by Ulf Kiener). - The last replayed recording is now stored in setup.conf, which allows the blue "Resume" key in the main menu to work even after a restart of VDR. - The SVDRP command NEWT no longer checks whether a timer with the given data already exists (suggested by Malte Forkel). - Implemented scaling of SPU bitmaps (thanks to Johann Friedrichs). - Improved cutting MPEG-2 video (thanks to Sören Moch). - Reduced the number of retries in cTransfer::Receive() to avoid blocking recordings in case the primary device can't handle the current live signal.	2013-01-22 00:35:10 +01:00
Klaus Schmidinger	873ab00a77	Version 1.7.35 ... VDR developer version 1.7.35 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.35.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.34-1.7.35.diff MD5 checksums: 3b9d0376325370afb464b6c5843591c7 vdr-1.7.35.tar.bz2 4b6fb681359325ad33a466503503e772 vdr-1.7.34-1.7.35.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Changed the type of the TimerMatch parameter in cSkinDisplayMenu::SetItemEvent() from 'int' to 'eTimerEvent' (reported by Christoph Haubrich). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cOsd::GetBitmap() to always return NULL if a non-exising area is requested. - Added several missing "`ls $^`" in the calls to xgettext in plugin Makefiles and the "newplugin" script. - Fixed setting the --package-name and --package-version options in the calls to xgettext in several plugin Makefiles. - Added "-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE" to the DEFINES in the Makefile (somehow got lost from Make.config.template in version 1.7.13). - Removed some redundancy in the Makefile/Make.global/Make.config mechanism (suggested by Christopher Reimer). The file Make.global is no longer used, and plugin Makefiles don't include the file Make.config any more. Instead they now retrieve all necessary information through calls to pkg-config. - The plugin Makefiles now have a separate 'install' target (suggested by Christopher Reimer). In order to still allow the normal building of VDR (with all plugins in its ./PLUGINS/src subdirectory, the plugin libraries in ./PLUGINS/lib and the i18n files in ./locale) the VDR Makefile checks the settings of LIBDIR and LOCDIR when building the plugins from within the VDR source directory. If these macros have their default values, then the 'install' targets of the plugins' Makefiles are called. Otherwise the 'all' targets are called and the plugins are merely built, and will have to be installed by a call to 'make install-plugins'. This now also allows a user to copy a plugin source to any directory, change into that directory and do 'make' and 'make install' to have the plugin installed to wherever the local installation of VDR expects them. - Plugin Makefiles now use DESTDIR and the 'install' program (thanks to Christopher Reimer). - Due to the changes to the plugin Makefiles, existing plugins will not build with this version of VDR any more. You can either use the new 'newplugin' script to generate a dummy plugin directory and use the Makefile from there (adapting it to your particular plugin), or apply the patch from ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33-pluginmakefile.diff to your Makefile to make the necessary changes (see comments in that file for details). - Added the new menu categories mcChannelEdit, mcTimerEdit, mcScheduleNow, mcScheduleNext, mcRecordingInfo, mcPluginSetup, mcSetupOsd, mcSetupEpg, mcSetupDvb, mcSetupLnb, mcSetupCam, mcSetupRecord, mcSetupReplay, mcSetupMisc and mcSetupPlugins. - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed replay stuttering close to the end of an ongoing recording (reported by Andreas Regel). - Fixed cIndexFile::GetNextIFrame() to properly handle the case where the very last frame is an I-frame (which normally shouldn't occur). - Fixed replaying ongoing recordings from other VDR instances.	2012-12-31 16:01:02 +01:00
Klaus Schmidinger	15485a5e06	Version 1.7.34 ... VDR developer version 1.7.34 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.34.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33-1.7.34.diff and a helper patch for plugin Makefiles can be found at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33-pluginmakefile.diff MD5 checksums: 55d9aba62563efe39ee040e987f7023c vdr-1.7.34.tar.bz2 019ba806b263f7054dbd0da8956ea73b vdr-1.7.33-1.7.34.diff 6c2b8efe5eead6822f006bc867ccb324 vdr-1.7.33-pluginmakefile.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. IMPORTANT: ========== This version comes with revised versions of the Makefiles for VDR itself and all of its standard plugins. As a result of this, existing plugins will no longer build with this version of VDR, unless their Makefiles are properly adapted. To do so, please follow the instructions given below. There is also a generic patch (see below) that might help you update your plugin's Makefile. If you do want to build this version of VDR with plugins that don't have their Makefiles adapted yet, you can simply copy the Makefile, Make.global and Make.config (if applicable) files from a previous version of VDR into this source and use them. Note, though, that you cannot mix old and new Makefiles. All Makefiles for VDR and all plugins must be either old or new! PLEASE GIVE THE PLUGIN DEVELOPERS SOME TIME TO ADAPT THEIR MAKEFILES ACCORDINGLY. AFTER ALL, IT'S CHRISTMAS, SO THEY PROBABLY HAVE BETTER THINGS TO DO THAN SIT AT THEIR COMPUTERS ;-). From the HISTORY file: - Changed the type of the TimerMatch parameter in cSkinDisplayMenu::SetItemEvent() from 'int' to 'eTimerEvent' (reported by Christoph Haubrich). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cOsd::GetBitmap() to always return NULL if a non-exising area is requested. - Added several missing "`ls $^`" in the calls to xgettext in plugin Makefiles and the "newplugin" script. - Fixed setting the --package-name and --package-version options in the calls to xgettext in several plugin Makefiles. - Added "-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE" to the DEFINES in the Makefile (somehow got lost from Make.config.template in version 1.7.13). - Removed some redundancy in the Makefile/Make.global/Make.config mechanism (suggested by Christopher Reimer). The file Make.global is no longer used, and plugin Makefiles don't include the file Make.config any more. Instead they now retrieve all necessary information through calls to pkg-config. - The plugin Makefiles now have a separate 'install' target (suggested by Christopher Reimer). In order to still allow the normal building of VDR (with all plugins in its ./PLUGINS/src subdirectory, the plugin libraries in ./PLUGINS/lib and the i18n files in ./locale) the VDR Makefile checks the settings of LIBDIR and LOCDIR when building the plugins from within the VDR source directory. If these macros have their default values, then the 'install' targets of the plugins' Makefiles are called. Otherwise the 'all' targets are called and the plugins are merely built, and will have to be installed by a call to 'make install-plugins'. This now also allows a user to copy a plugin source to any directory, change into that directory and do 'make' and 'make install' to have the plugin installed to wherever the local installation of VDR expects them. - Plugin Makefiles now use DESTDIR and the 'install' program (thanks to Christopher Reimer). - Due to the changes to the plugin Makefiles, existing plugins will not build with this version of VDR any more. You can either use the new 'newplugin' script to generate a dummy plugin directory and use the Makefile from there (adapting it to your particular plugin), or apply the patch from ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33-pluginmakefile.diff to your Makefile to make the necessary changes (see comments in that file for details). - Added the new menu categories mcChannelEdit, mcTimerEdit, mcScheduleNow, mcScheduleNext, mcRecordingInfo, mcPluginSetup, mcSetupOsd, mcSetupEpg, mcSetupDvb, mcSetupLnb, mcSetupCam, mcSetupRecord, mcSetupReplay, mcSetupMisc and mcSetupPlugins. - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed replay stuttering close to the end of an ongoing recording (reported by Andreas Regel). - Fixed cIndexFile::GetNextIFrame() to properly handle the case where the very last frame is an I-frame (which normally shouldn't occur). - Fixed replaying ongoing recordings from other VDR instances.	2012-12-26 17:42:33 +01:00
Klaus Schmidinger	5109addf9c	Version 1.7.33 ... VDR developer version 1.7.33 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.32-1.7.33.diff MD5 checksums: 7c21451360ac7959d0d95e533d34451c vdr-1.7.33.tar.bz2 c79257198f8569bc02f43dc470ee3076 vdr-1.7.32-1.7.33.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. IMPORTANT: ========== This version of VDR no longer sets LC_NUMERIC to "C" in order to make sure any floating point numbers written to configuration files use a proper decimal point. It rather explicitly converts such numbers using the new functions atod() and dtoa(). IF YOU USE PLUGINS THAT STORE FLOATING POINT NUMBERS IN THEIR OWN CONFIGURATION FILES, YOU SHOULD SET export LC_NUMERIC=C BEFORE RUNNING VDR, UNTIL THESE PLUGINS HAVE BEEN PROPERLY UPDATED. From the HISTORY file: - In order to be able to play TS recordings from other sources, in which there is more than one PMT PID in the PAT, 'int cPatPmtParser::PatPmt(void)' has been changed to 'bool cPatPmtParser::IsPatPmt(int Pid)'. - Fixed learning remote control keys with the LCARS skin. - Updated the Macedonian OSD texts (thanks to Dimitar Petrovski). - Fixed getting only non-video packets in cCuttingThread::GetPendingPackets() (reported by Sören Moch). - Changed all occurrences of MPEG4 to H264 (pointed out by Sören Moch). - Fixed getting the number of editing sequences in case the last sequence has no actual end mark. - The cutter now only increments the TS continuity counter for packets that have a payload (pointed out by Sören Moch). - Fixed adjusting the DTS values in the cutter, to compensate for dropped B-frames (pointed out by Sören Moch). - Fixed a typo in skins.h (thanks to Lars Hanisch). - Simplified calculating the PTS offset in cPtsFixer::Fix() and fixed the overflow handling of PCR values (thanks to Sören Moch). - Fixed calling iconv_close() only with a valid iconv_t value (thanks to Juergen Lock). - Fixed faulty opening of the Recordings menu when pressing the Play key during normal live viewing mode in case there is a "last viewed" recording. - Fixed some #include statements in plugins to use <vdr/...> instead of "vdr/..." (thanks to Lars Hanisch). - Fixed some spellings in osd.h and svdrp.c (thanks to Ville Skyttä). - Fixed handling lowercase polarization characters in channel definitions if no DiSEqC is used (reported by Mike Hay, actual bug pointed out by Stefan Huelswitt). - Synchronizing system time to the transponder time is now done using adjtime() in order to avoid discontinuities (suggested by Manuel Reimer). If the time difference is more than 10 seconds, stime() is still used to do the initial sync. - The '7' and '9' keys now jump to the very beginning or end, respectively, of the recording, even if there is no mark set at that point (following a request from Andre Weidemann). - Now always setting the TDT EIT filter, because otherwise when turning on using the transponder time in the Setup menu, it would only be used after the next restart of VDR (thanks to Sundararaj Reel). - The new functions cDevice::CanScaleVideo() and cDevice::ScaleVideo() can be used by derived output devices to implement scaling the video to a given size and location (based on a suggestion by Lucian Muresan). - The SVDRP command HITK now discards any keys if the remote control is currently turned off (thanks to Alexander Hans). - The new remote control key "Play/Pause" can be used with remote controls that don't have separate keys for "Play" and "Pause", but rather have a single key for both functions (thanks to Stefan Hofmann for suggesting to implement support for such remote controls). - The new option "Setup/Replay/Pause on mark set" can be used to activate automatically going into Pause mode if an editing mark is set during replay (suggested by Andre Weidemann). - When regenerating the index of a recording, the frame rate stored in the info file is now automatically fixed if it differs from the value detected by the frame detector. - Fixed creating the edited version directory if a relative file name is given in the call to 'vdr --edit' (the '/video' part was stripped from the given file name even if it wasn't there). - The new option "Setup/Replay/Progress display time" can be used to activate automatically displaying the progress display whenever replay of a recording is started (suggested by Stefan Blochberger). - Changed reading and writing of floating point numbers into configuration files to make it independent of the decimal point used in the current locale. All calls to atof() have been replaced with the new function atod(), which makes sure the string representation of a floating point number using a '.' as decimal point will be handled correctly, even if the locale in use expects a ',' as the decimal point. Plugins that read floating point numbers from their own configuration files will also need to use atod() for this, or use a method of their own (this is not necessary if values are stored in VDR's setup.conf file, because VDR takes care of this). The reason for these changes is that floating point numbers presented to the user shall be displayed in the way defined by the current locale (suggested by Stefan Blochberger). If you use plugins that store floating point values in configuration files of their own and have not yet been adapted to this change, you should set export LC_NUMERIC=C before running VDR. Otherwise your plugin's configuration data may not be read or written correctly. - The new functions SetItemEvent(), SetItemTimer(), SetItemChannel() and SetItemRecording() of the cSkinDisplayMenu class can be reimplemented by skin plugins to display these items in a more elaborate way than just a simple line of text.	2012-12-26 17:18:12 +01:00
Klaus Schmidinger	beffcabc81	Version 1.7.32 ... VDR developer version 1.7.32 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.32.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.31-1.7.32.diff MD5 checksums: 068ba78fd427694dcc480fe3b2d07148 vdr-1.7.32.tar.bz2 222f1e9b4d4edaa6fe57286409614cc7 vdr-1.7.31-1.7.32.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. The main focus of this version is on an improved frame detection code, and improvements to the cutting process. When cutting a recording, VDR now removes any "dangling" TS packets from the beginning of an editing sequence and pulls in any "pending" TS packets at the end of a sequence. It also fixes all timestamps and continuity counters. However, while the results look much better now in, for instance, Kaffeine, the TT S2-6400 still shows some video artifacts at the editing points, and the Mac video player sometimes totally chokes on edited material. I did spend a lot of time trying to find out what could still be wrong here, but couldn't come up with any new ideas. So I think it's now time to invite others to test this new cutting code, read the source code and try to find out what's still going wrong here. Maybe (hopefully ;-) it's just some stupid little error... ;-) From the HISTORY file: - Pressing the Play key during normal live viewing mode now opens the Recordings menu if there is no "last viewed" recording (thanks to Alexander Wenzel). The same behavior has been implemented for the Blue key in the main menu. - cIoThrottle::Engaged() is now also checked in cRemoveDeletedRecordingsThread::Action(), to suspend removing deleted recordings in case this is necessary to make room for new, ongoing recordings (suggested by Udo Richter). - The cThread constructor now has an additional boolean parameter that can be set to true to have this thread run at a lower priority. Plugin authors that use low priority threads may want to use this instead of the calls to SetPriority(19) and SetIOPriority(7). The priority of a thread ("low" or "high") is now logged when the thread starts. - Changed DTV_DVBT2_PLP_ID to DTV_STREAM_ID in dvbdevice.c to adapt to an incompatible change in DVB API 5.8 (reported by Derek Kelly). Removed the meanwhile obsolete definition of FE_CAN_TURBO_FEC. - Fixed some compiler warnings under gcc version 4.7.1. - Fixed setting the video format in the dvbhdffdevice (thanks to Torsten Lang). - Fixed 'make install' to not overwrite existing configuration files (thanks to Peter Münster). - Added including the Make.global and Make.config files to the dvbdhffdevice's libhdffcmd/Makefile. - Added options to build a 32-bit version of VDR on a 64-bit machine to Make.config.template. - Fixed handling VPS timers in case the running status of an event goes to '1' (not running) and later goes to '4' (running). - If a frame position in the 'marks' file of a recording doesn't point to an I-frame, it will now be shifted towards the next I-frame, either up or down, whichever is closer (suggested by Udo Richter). - Fixed a possible memory leak in SI::StructureLoop::getNextAsPointer() (reported by Sundararaj Reel). - Fixed handling timers in case an event is modified and "phased out" while the timer is recording. - Improved frame detection by parsing just far enough into the MPEG-4 NAL units to get the necessary information about frames and slices. - The initial syncing of the frame detector is now done immediately after the first complete GOP has been seen. This makes recordings and especially pausing live video start up to twice as fast as before. - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Fixed handling the very last entry in a recording index. - The return type of cMarks::Add() has been changed to void, since due to the sorting of the list of marks the returned pointer might have pointed to a totally different mark. Besides, the return value was never actually used. - Improved editing TS recordings by + stripping dangling TS packets from the beginning of a sequence + including pending TS packets at the end of a sequence + fixing all timestamps and continuity counters + generating editing marks for the edited version in such a way that each cutting point is marked by an "end" and "begin" mark with the same offset + no longer generating an editing mark at the "end" of the edited recording (this was actually generated at the beginning of the last GOP, so that a subsequent edit would have cut off the last GOP) + no longer generating any editing marks if the edited recording results on just one single sequence + ignoring pairs of editing marks that are placed at exactly the same position of a recording when actually cutting the recording + not doing anything if the editing marks in place would result in the edited version being the same as the original recording - Editing marks can now be placed directly on top of each other, in which case they simply mark a position, but have no effect on the actual cutting process. - When positioned at an offset where two (or more) editing marks are placed on top of each other, the '4' key moves the first one of them to the left, while the '6' key moves the last one of them to the right. The '7' and '9' key handle multiple marks at the same place as if it were one single mark. - Modified editing marks are now written to disk whenever the replay progress display gets hidden (thanks to Christoph Haubrich).	2012-11-19 00:55:28 +01:00
Klaus Schmidinger	046b506748	Version 1.7.29 ... Original announce message: VDR developer version 1.7.29 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.29.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.28-1.7.29.diff MD5 checksums: a3f0ae42ba456aa1865c9ed065a64d80 vdr-1.7.29.tar.bz2 39db6b495210c293726126fbcba3e631 vdr-1.7.28-1.7.29.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. The default skin "LCARS" displays the signal strengths and qualities of all devices in its main menu. For devices that have an stb0899 frontend chip (like the TT-budget S2-3200) retrieving this information from the driver is rather slow, which results in a sluggish response to user input in the main menu. To speed this up you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source. From the HISTORY file: - Added a missing template specification to the c'tor of cSortedTimers (thanks to Udo Richter). - Fixed the background color of the Transfer Mode indicator bitmap in the LCARS skin. - The LCARS skin now only displays devices that can actually receive channels, leaving out, for instance, pure replay devices (suggested by Reinhard Nissl). - Now scaling down the Transfer Mode indicator bitmap in the LCARS skin in case it doesn't fit with the selected font size (reported by Reinhard Nissl). - Fixed making LCARS the default skin. - Adjusted the default values for OSD and font sizes to better fit HDTV. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed the call to ChannelString() in cSkinLCARSDisplayChannel::SetChannel() (thanks to Rolf Ahrenberg). - Removed DeleteEvent() from the EPG handler interface (turned out not to be useful) and replaced it with HandledExternally() (thanks to Jörg Wendel). - Added SetComponents() to the EPG handler interface (thanks to Dirk Heiser). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Changed the button colors in the LCARS skin to better fit with the rest of the theme. - Removed the gap from the main menu buttons in the LCARS skin. - Fixed some copy&paste errors in PLUGINS.html (thanks to Winfried Köhler). - The LCARS skin's main menu now only displays timers that are actually activated. - Within the "Recordings" menu, pressing the '0' key now toggles sorting between "by time" and "by name". The selected sort mode is stored separately for each folder (provided you have write access to that folder). If a folder is newly created by a repeating timer, the sort mode for that folder is initially set to "by time". - Fixed several spelling errors (thanks to Ville Skyttä). - Fixed handling recording with more than two bonded devices. - Fixed the type of MBperMinute in cVideoDiskUsage::HasChanged() (thanks to Andreas Mair). - Setting the "broken link" or "TEI" flags when cutting recordings is now suppressed if the editing point merges two seamlessly fitting parts of the same stream (thanks to Torsten Lang). - Fixed displaying messages in the LCARS skin. - Fixed checking for a visible live programme in case a menu or the channel display is currently open. - Changed some of the colors in the LCARS skin (you may need to delete the file lcars-default.theme from your themes directory to see these changes). - The new setup option "Miscellaneous/Show channel names with source" can be used to turn on adding the source character to channel names whenever they are displayed (suggested by Ludi Kaleni).	2012-07-15 20:49:35 +02:00
Klaus Schmidinger	5500959f4f	Version 1.7.28 ... Original announce message: VDR developer version 1.7.28 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.28.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27-1.7.28.diff MD5 checksums: 3ccff2dcc42d112e23dd64f2c39f02f1 vdr-1.7.28.tar.bz2 7249ead4aca4b24e53d49d11c67e1613 vdr-1.7.27-1.7.28.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. The new default skin "LCARS" displays the signal strengths and qualities of all devices in its main menu. For devices that have an stb0899 frontend chip (like the TT-budget S2-3200) retrieving this information from the driver is rather slow, which results in a sluggish response to user input in the main menu. To speed this up you may want to apply the patches from From the HISTORY file: - Fixed cPixmapMemory::DrawEllipse() for quadrants -1 and -4. - Fixed getting the maximum short channel name length in case there are no short names at all (reported by Derek Kelly). - The new function cDevice::DeviceType() returns a string identifying the type of the given device. - Now limiting the number of characters of a channel's (short) name to 16 in the schedules menus, to keep that column from getting overly wide in case there is a channel with a very long name that has no short name. - Fixed EPG scan on systems with only a single DVB device that use software output (reported by Juergen Lock). - Skins can now inquire the menu category for which their cSkinDisplayMenu is currently being used. This can be done either through a call to cSkinDisplayMenu::MenuCategory() or by reimplementing cSkinDisplayMenu::SetMenuCategory(). This information allows a skin to use special icons or decorations for the various types of menus in VDR. - The new setup option "DVB/Standard compliance" can be used to switch between different variations of the DVB standard (thanks to Rolf Ahrenberg). Currently there is "DVB" (for the original DVB standard) and "ANSI/SCTE", which is used to properly handle certain private stream types. - The disk usage is no longer automatically added to the title of the main and "Recordings" menus. This has always been a mekeshift solution and it is now up to the individual skin if, where and how it wants to display this information. A skin can use the new cVideoDiskUsage class to implement such a display. For compatibility, the default skins "Classic VDR", "ST:TNG Panels" and "Text mode" (i.e. curses) have been changed to behave like before. Other skins may want to display the disk usage in totally different ways. - A cOsdMenu can now handle skins that display different numbers of items in the various menu categories. - OSD and skin are now reinitialized after a plugin setup page has been confirmed, to have them react immediately in case any change to a plugin's setup parameter has an effect on the OSD. - The Timers list is now marked as modified whenever a recording starts or ends. - Fixed cDevice::StillPicture(), making sure it doesn't call the derived class's function if no buffer has been allocated (reported by Marcus Roscher). - Fixed the SVDRP command UPDR, which didn't update the global recordings list (reported by Lars Hanisch). - cControl::Control() now has an additional boolean parameter, which can be set to true to get the current player control even if it is hidden. - The new functions cControl::GetRecording() and cControl::GetHeader() can be used to retrieve information about what the current player is playing. - Fixed a possible high CPU load when pausing replay (thanks to Reinhard Nissl). - Fixed character comparisons in cSubtitleObject::DecodeCharacterString() (reported by Reinhard Mantey). - Renamed the function cString::sprintf(const char *fmt, va_list &ap) to vsprintf(), because it might inadvertently be called with a 'char *' as the second argument on some compilers and cause a crash (reported by Sundararaj Reel). - Removed the "bondedMasterFailed" mechanism from cDvbTuner, because it caused problems with the EPG scan in case a transponder is not receivable in a setup with bonded devices (reported by Michael Schneider). - Making sure setup strings don't contain any newline characters (thanks to Joachim Wilke). - The new member function cSkinDisplayReplay::SetRecording() allows a skin to display more information about the currently played recording. - Fixed a mismatched 'delete' in cSchedules::SetEpgDataFileName() (thanks to Reinhard Mantey). - The DrawText() functions of the OSD now accept the new alignment flag taBorder, which triggers keeping a proper distance from the edge that taLeft or taRight aligns to. - Fixed checking for UTF-8 support in cFont::Bidi() (reported by Torsten Lang). - If a recording has no info file, the 'title' of the recording's info is now set to the recording's name. - cVector::Clear() now reinitializes any previously used members. - Fixed resetting CAMs (thanks to Marco Skambraks). - The new function RgbShade() (include osd.h) can be used to generate a brighter or darker version of a given color. - The new class cSortedTimers can be used to quickly get a list of all timers, sorted by their start time. - The new skin "LCARS" is an enhanced version of the "ST:TNG" skin (which is still there in its original layout, for those who don't like the LCARS skin, or can't use it due to OSD limitations). The LCARS skin utilizes the new "menu category" feature to display additional information on the main menu page. It shows upcoming timers and the system's devices, as well as which device is recording which timers. The upper pane of the main menu displays the programme data in live and replay mode, and a progress bar. An indicator on the right side of the device list shows which device is currently used for live viewing, and whether it is in transfer mode. The individual device displays show the device number, the device type, which CAM (if any ) is currently assigned to the device, and the signal strength and quality. On the left side of the OSD there is a permanent display of the current date and time, the disk usage and the system load. "LCARS" is the new default skin of VDR. It requires at least a 4bpp (16 color) full screen OSD, but you can still operate it if your OSD can handle only fewer colors (in which case you may want to switch to the "ST:TNG" or "Classic VDR" skin). - Finally removed the code marked with __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS and LEGACY_CRECEIVER. - Now making sure that the "small font" is never larger than the "osd font". - Fixed font handling with fontconfig 2.9.0 or newer (thanks to Joerg Bornkessel). - Extended the interface to the script that gets called for recordings, so that in the "edited" case it also provides the name of the original recording (thanks to Christian Richter). - Added DeleteEvent() to the EPG handler interface, so that an EPG handler can trigger deleting of an event (thanks to Christian Kaiser). - Speeded up opening menus on systems with many (several thousands) of recordings, by caching the information whether a recording is stored on the video directory file system within the cRecording data (based on a patch from Torsten Lang).	2012-06-05 00:33:28 +02:00
Klaus Schmidinger	19b952728e	Version 1.7.27 ... Original announce message: VDR developer version 1.7.27 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26-1.7.27.diff MD5 checksums: bfeaa79a9e55144bca2b69139c45f1bb vdr-1.7.27.tar.bz2 b23344be51d3e2c2d96cc2dd4e8e564e vdr-1.7.26-1.7.27.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Changed the Green button in the "Edit timer" menu from "Once" to "Single" (suggested by Rolf Ahrenberg). - Fixed some typos in HISTORY and CONTRIBUTORS (thanks to Ville Skyttä). - The channel name column in the "What's on now/next" menu now adjusts its width to display the full short name of each channel (suggested by Dominic Evans). - Dropped the meanwhile obsolete script 'i18n-to-gettext'. - Removed the obsolete function cPlugin::RegisterI18n(). - Removed the obsolete typedef tI18nPhrase. - Adapted menu column widths of 'skincurses' to the wider HD OSD sizes. - Deactivated definition of __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS (recording.h) and LEGACY_CRECEIVER (receiver.h) to trigger an error for any plugin that still uses the respective code. You can reactivate these to quickly make your plugin compile again, but beware that these code parts will be removed in one of the next versions. - Made the "overloaded-virtual" warning an error to detect hidden overloaded virtual functions (thanks to Anssi Hannula for pointing out -Werror=...). Plugin authors may want to change -Woverloaded-virtual to -Werror=overloaded-virtual in their Makefiles. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Improved fast forwarding to the end of a timeshift recording. - The new function cDevice::DeviceName() returns a string identifying the name of the given device. - When toggling a timer between "Single" and "Repeating", the previous setting is now retained in case the user toggles back to the original value. - When estimating the remaining disk space (in hours), the average data rate of all existing recordings is now taken into account. If this value can't be determined, the previous value of 25.75 MB/min is taken. - No longer using GetFont() (which is not thread safe) in the 'osddemo' plugin. - No longer using GetFont() (which is not thread safe) in cSubtitleRegion::UpdateTextData(). - Fixed a memory leak in cSubtitleRegion::UpdateTextData(). - Moved setting LC_NUMERIC further up to make sure any floating point numbers use a decimal point (suggested by Tobias Grimm). - Added missing channel locking to cEIT. - Fixed reduced bpp support for DVB subtitles (thanks to Rolf Ahrenberg). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Reverted some improvements to Make.config.template (thanks to Christian Ruppert). - Fixed handling IDLEPRIORITY in cDvbDevice::ProvidesChannel() (thanks to Frank Schmirler).	2012-03-25 15:43:37 +02:00
Klaus Schmidinger	5117f35938	Version 1.7.26 ... Original announce message: VDR developer version 1.7.26 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25-1.7.26.diff MD5 checksums: eb57398e44935ecb0bfc532bdfead312 vdr-1.7.26.tar.bz2 62e0f39e2c53ec2b5abd3ebb0e00ce3d vdr-1.7.25-1.7.26.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Now checking for NULL in cOsd::AddPixmap() (suggested by Christoph Haubrich). - Fixed the German translation of "VDR will shut down in %s minutes" (thanks to Frank Neumann). - The replay progress display is now turned on whenever a mark is toggled (not only when one is set). - Toggling a mark now restarts the timeout of the replay progress display. - Fixed a possible race condition with the SVDRP commands CLRE and PUTE, where EPG data from the transponder could be handled even though it shouldn't be handled for 10 seconds. - Added some missing member initializations in cBitmap. - Improved displaying the play mode in the ST:TNG skin. - Made the ST:TNG skin the default in case the user selected skin is not available. - Improved displaying signal strength and quality in the ST:TNG skin's channel display. - Fixed switching devices to the transponders of VPS recordings in case there are only bonded devices. The cDevice's "avoid device" mechanism has been replaced by using "occupied". - Fixed selecting devices for the EPG scan in case the primary device is bonded with an other one. - Removed the calls to EITScanner.UsesDevice(this) from dvb[hs]ddevice.c, because the code following these calls is only executed if LiveView is true, which is never the case when the EITScanner switches to a channel. - Removed the obsolete function cEITScanner::UsesDevice(). If a plugin has used this function to find out whether a call to its cStatus::ChannelSwitch() function was due to a live channel switch, it can use that function's new parameter LiveView. Any plugins that implement cStatus::ChannelSwitch() need to add the parameter 'bool LiveView' to that function. - Fixed parsing channel data in case the audio pid is 0. On channels that only broadcast Dolby Digital audio there were sometimes log entries like "changing pids of channel ... from ... to ..." with no apparent difference between the old and new set of pids. - Fixed checking pids in case a channel has only Dolby Digital audio. - The Green button in the "Edit timer" menu can now be used to toggle between single shot and repeating timers. This is the same as pressing '0' when the "Day" field is selected, but it works at any time (and is more obvious). - Revoked "If the first event in a schedule has a table id of 0x00, any incoming EIT data for that schedule from the DVB stream will be completely ignored". - Added a new plugin interface for implementing EPG handlers. + A plugin can implement an EPG handler by creating an object derived from cEpgHandler and implementing the necessary member functions. + The special handling of events with table id 0x00 has been dropped. For backwards compatibility EPG events with table ids lower than 0x4E will be treated as if they had a table id of 0x4E, and the new plugin 'epgtableid0' can be used to have them handled like in previous versions. + The default table id for a newly created cEvent has been changed to 0xFF, which is higher than any normal table id that is broadcast in the EIT data. See PLUGINS.html, section "Electronic Program Guide" for more information.	2012-03-11 18:00:38 +01:00
Klaus Schmidinger	3df1b6d139	Version 1.7.25 ... Original announce message: VDR developer version 1.7.25 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24-1.7.25.diff MD5 checksums: a3fd482a3dd8027706d4f32a88c6bd13 vdr-1.7.25.tar.bz2 f34adcdc0cdab378431d8946872d6b59 vdr-1.7.24-1.7.25.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - The fps value for channels where it differs from the default is now set correctly when pausing live video. - Increased the average character estimate for calculating tab positions in skins, to better suit wide fonts (reported by Rudi Hofer). - Fixed getting the subsystem ids of DVB devices in case they have been rearranged via udev rules. - Added several cTimer::Set...() functions (suggested by Alexander Rieger). - Changed the return value of cTimer::SetFile() to 'void'. - Revoked "Fixed a possible deadlock in time shift mode" because it caused trouble with output on vdr-xine and dxr3, and also short glitches when replaying on any output device. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed handling subtitle color palettes on channels where subtitles appear "word by word" (thanks to Rolf Ahrenberg). - Fixed upscaling cBitmaps with anti-aliasing (thanks to Rolf Ahrenberg for reporting a problem with color palettes in subtitles). - Fixed getting the video aspect ratio for scaling subtitles. - Removed the "PrimaryLimit". Old "full featured" DVB cards can be run with the --outputonly option to avoid problems with recording high bandwidth channels. Besides, with HDTV becoming ever more popular those cards are pretty much obsolete by now (the TT S2-6400 has no problems recording and replaying high bandwidth channels simultaneously). And, last but not least, people using software players won't notice this change, anyway. - Since cReceivers can have priorities between -99 and 99, the priority for an unused device has been changed from -1 to -100. - If the first event in a schedule has a table id of 0x00, any incoming EIT data for that schedule from the DVB stream will be completely ignored. This way an external EPG source can fill the schedules with EPG data that will not be messed up with that from the DVB data stream. Note, though, that this means VDR can not do VPS controlled recordings with such events! - Added some typecasts to silence gcc compiler warnings (thanks to Rolf Ahrenberg). - Fixed handling overlapping timers in case a VPS timer with higher priority needs to interrupt a timer with lower priority. - The code for the RCU remote control unit has been moved into a separate plugin named "rcu". The REMOTE=RCU option in the 'make' call for VDR is now obsolete. The command line option --rcu is now obsolete. Use -Prcu instead. If you have used --rcu with a device path, use -P"rcu -d<device>". - Added support for automatically selecting subtitles when playing old PES recordings made with the subtitles plugin (thanks to Anssi Hannula). - Revised priority handling to allow receivers with a priority that is lower than that of live viewing (with suggestions from Frank Schmirler): + An idle device (one that is not used for live viewing and has no receiver attached to it) now has priority IDLEPRIORITY (-100). + An unused CAM slot now has priority IDLEPRIORITY. + The default priority of a cReceiver is now MINPRIORITY (-99). + A device that is used only for live viewing (no matter whether it's in Transfer Mode or real live mode) now has priority TRANSFERPRIORITY (-1). + The function cDevice::Receiving() now returns true if there is any receiver attached to the device. Its boolean parameter has no meaning any more. + The default value for the Priority parameter of the function cDevice::ProvidesChannel() has been changed to IDLEPRIORITY. - Added a Query parameter to cDevice::GetDevice(), so that devices can be queried without side effects when zapping. - Replaced min(max()) calls with the new function constrain(). - Fixed handling OSD color button texts in case a menu item has texts of its own (reported by Rolf Ahrenberg). If a plugin creates derived cMenuEditItems that set color button texts, these should not set the texts directly by calling cSkinDisplay::Current()->SetButtons(), but rather call the new member function cMenuEditItem::SetHelp(). - Moved the call to cStatus::MsgChannelSwitch(this, 0) to the beginning of cDevice::SetChannel(), so that any receivers that have been attached to the device by plugins may be detached before the final call to GetDevice(). This actually reverts "Only calling cStatus::MsgChannelSwitch() if a channel is actually going to be switched or has actually been switched successfully" which was made in version 1.1.10, so please report if this has any unwanted side effects.	2012-03-10 23:52:09 +01:00
Klaus Schmidinger	c2d9577b3d	Version 1.7.24 ... Original announce message: VDR developer version 1.7.24 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23-1.7.24.diff MD5 checksums: a034c5e399417dfc583483f650d003ee vdr-1.7.24.tar.bz2 aa1a2b202da92e65945ff39470b26618 vdr-1.7.23-1.7.24.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed a high load in case a transponder can't be received. - Improved the way DVB_API_VERSION is checked. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed asserting there is a live programme if the primary device is bonded with a device that starts a recording on a different band. - Fixed the return type of cMyDeviceHook::DeviceProvidesTransponder() in PLUGINS.html. - Fixed a crash in a plugin using cDeviceHook when VDR ends (reported by Oliver Endriss). - Some improvements to the Makefiles (thanks to Christian Ruppert). - Fixed cRecording::LengthInSeconds(), which wrongfully rounded the result to full minutes (thanks to Christoph Haubrich). - Symbolic links are no longer resolved in cRecordings::ScanVideoDir() (thanks to Sundararaj Reel). - The epg.data file is now read in a separate thread to make the startup process faster in case the file is very large (suggested by Helmut Auer). - Fixed selecting the primary device for receiving the live viewing channel in case it is bonded with an other device and has no receiver attached to it. - Fixed a possible crash when canceling VDR while displaying subtitles, and the primary device is no longer available. - Improved handling subtitles of BBC channels. - No longer using tabs as delimiter in the EPG bugfix log (they were garbled in the log file). - Added a missing '.' after the month in VPS strings. - Added some missing 'const' to cDevice (thanks to Joachim Wilke). - Fixed handling the PrimaryLimit when requesting a device for live viewing (reported by Uwe Scheffler). - Removed superfluous calls to SetVideoFormat() from device constructors. This function is called in cDevice::SetPrimaryDevice(), anyway. - An ongoing editing process is now canceled if either the original or the edited version of the recording is deleted from the Recordings menu. - The SVDRP command DELR now won't delete a recording that is currently being edited. - Removed code stub for obsolete SVDRP command MOVT. - The DVB device adapters/frontends are now probed by scanning the /dev/dvb directory instead of looping through adapter/frontend numbers. This allows for "holes" in the device numbering. - cReadDir::Next() now skips directory entries "." and "..". - Fixed a possible deadlock in time shift mode. - Fixed switching into time shift mode when pausing live video (thanks to Reinhard Nissl for helping to debug this one).	2012-02-19 16:36:45 +01:00
Klaus Schmidinger	5a28d99936	Version 1.7.22 ... Original announce message: VDR developer version 1.7.22 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff MD5 checksums: b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2 868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't return actual values (thanks to Luca Olivetti). - The DiSEqC codes are now copied in the call to cDiseqc::Execute(). - VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on the "unicable" patch from Lars Hanisch). Since "Unicable" is a registered trademark and stands for only one of many implementations of SCR, the following changes have been made compared to the patch, which need to be taken into account by people who have set up their system using the patch: - The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr"). - The configuration file name has been changed from "unicable.conf" to "scr.conf". - Updated sources.conf (thanks to Arthur Konovalov). - The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans). - Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks to Rolf Ahrenberg). - Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans). - Fixed setting the start time of an edited recording (thanks to Christoph Haubrich). - Temporarily switching free devices to transponders in order to have their running status updated is now done by marking the devices as "occupied" for a certain amount of time. - The new setup options "LNB/Device n connected to sat cable" can be used to define which DVB-S devices are connected to the same sat cable and are therefore "bonded". This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly set up their sat devices with the above options. - Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä). - Fixed several spelling errors (thanks to Ville Skyttä). - The new SVDRP command UPDR can be used to trigger an update of the list of recordings (thanks to Lars Hanisch). - Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä). - Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä). - Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks to Ville Skyttä). - Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg). - Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg). - Fixed a crash with malformed SI data (patch from vdr-portal).	2011-12-05 20:36:02 +01:00
Klaus Schmidinger	0c96d6b626	Version 1.7.21 ... Original announce message: VDR developer version 1.7.21 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20-1.7.21.diff MD5 checksums: 7300bfd997db1a848bd774fefe4aec80 vdr-1.7.21.tar.bz2 c4e745939f31543dd607b97d58fc86be vdr-1.7.20-1.7.21.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version contains functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. From the HISTORY file: - Fixed detecting frames for channels that split frames into several payloads (reported by Derek Kelly). - Now initializing Setup.InitialChannel to an empty string to avoid problems in case there is no setup.conf. - The start time of an edited recording is now set to the time of the first editing mark (thanks to Udo Richter). This obsoletes the CUTTIME patch. - Direct access to the members start, priority, lifetime, and deleted of cRecording as well as to position and comment of cMark is now deprecated. Plugin authors should switch to the new access functions for these members. For now the macro __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS is defined in recording.h, which exposes these members, so that existing plugins will still compile. Comment out this #define to check whether a particular plugin needs to be modified. This #define may be removed in a future version. - The new functions cRecording::NumFrames() and cRecording::LengthInSeconds() return the number of frames and length (in seconds) of a recording (suggested by Steffen Barszus). - The subtitle PIDs are now stored in the channels.conf file as an extension to the TPID field (thanks to Rolf Ahrenberg). - The new function cDevice::ProvidesEIT() is used to determine whether a device can provide EIT data and will thus be used in cEITScanner::Process() to receive EIT data from the channels it can receive (suggested by Rolf Ahrenberg). Note that by default it is assumed that a device can't provide EIT data, and only the builtin cDvbDevice returns true from this function. - The Audio and Subtitles options are now available through the Green and Yellow keys in the Setup/DVB menu (thanks to Rolf Ahrenberg). This is mainly for remote controls that don't have dedicated keys for these functions. - The SVDRP command HITK now accepts multiple keys (up to 31). - The Recordings menu now displays the length (in hours:minutes) of each recording (thanks to Rolf Ahrenberg). Note that the "new" indicator has been moved from the recording time to the length column. This new format is also used by the SVDRP command LSTR, so in case you have an application that parses the LSTR output, you will need to adjust it to the new format. - The dvbsddevice plugin now supports the new option --outputonly, which disables receiving on SD FF devices and uses the device only for output (thanks to Udo Richter). - Fixed detecting frames on radio channels (reported by Chris Mayo). - Revoked the changes to cFrameDetector that have been introduced in version 1.7.19. Detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries is now done by locally skipping TS packets in cFrameDetector.	2011-09-04 17:50:17 +02:00
Klaus Schmidinger	7df66b0587	Version 1.7.20 ... Original announce message: VDR developer version 1.7.20 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19-1.7.20.diff MD5 checksums: eda2911fff1715ba5b1482b20ad18188 vdr-1.7.20.tar.bz2 a8f5bcaf3294cc9fce87283a618d5ce1 vdr-1.7.19-1.7.20.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version contains functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. From the HISTORY file: - Added some missing 'const' to tChannelID (reported by Sundararaj Reel). - The isnumber() function now checks the given pointer for NULL (thanks to Holger Dengler). - Now checking Setup.InitialChannel for NULL before using it (reported by Christoph Haubrich). - cSkins::Message() now blocks calls from background threads (thanks to Michael Eiler for reporting a crash in such a scenario). - Fixed the return value of the svdrpsend.pl script in case of an error (thanks to Jonas Diemer). - Increased MAXCAIDS to 12 (thanks to Jerome Lacarriere). - Fixed handling DiSEqC codes (thanks to Mark Hawes for reporting the bug, and Udo Richter for suggesting the fix). - Added a mechanism to defer timer handling in case of problems (reported by Frank Niederwipper). - Fixed distortions that happened when splitting recording into several files (was a side effect of "Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries" in version 1.7.19). cRecorder::Action() now buffers TS packets in case the frame type is not yet known when a new payload starts. This adds no overhead for channels that broadcast the frame type within the first TS packet of a payload; it only kicks in if that information is not in the first TS packet. - Fixed handling the channelID in cMenuEditChanItem (thanks to Udo Richter). - cStringList::Sort() can now be called with a boolean parameter that controls case insensitive sorting (suggested by Sundararaj Reel). - Now scanning new transponders before old ones, to make sure transponder changes are recognized (thanks to Reinhard Nissl). - Implemented static cIndexFile::IndexFileName(). - The length (as number of frames) of a recording's index file can now be determined by a call to cIndexFile::GetLength() (suggested by Christoph Haubrich). - Fixed some crashes in subtitle display (thanks to Rolf Ahrenberg). - Made DELETENULL() thread safe (reported by Rolf Ahrenberg). - The pic2mpg script of the 'pictures' plugin now generates HD images (thanks to Andre Weidemann for his support in using convert/ffmpeg). The old SD version is still available as pic2mpg-sd. - Added a mutex to protect cOsd::Osds from simultaneous access from different threads (reported by Rolf Ahrenberg). - The cutter now sets the 'broken link' flag for MPEG2 TS recordings (thanks to Oliver Endriss). - Fixed language code entry for Portuguese. - The new command line options --filesize (suggested by Marco Göbenich) and --split can be used together with --edit to set the maximum video file size and turn on splitting edited files at the editing marks. These options must be given before --edit to have an effect. - cTimeMs is no longer initialized to the current time if the value given to the constructor is negative (avoids the "cTimeMs: using monotonic clock..." log message before VDR's starting log message).	2011-08-16 20:32:01 +02:00
Klaus Schmidinger	bd61fee1e9	Version 1.7.19 ... Original announce message: VDR developer version 1.7.19 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff MD5 checksums: 1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2 db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version introduces functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. Since apparently the various frontend drivers return different maximum values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some deliver a value in the range 0x0000...0xFFFF, while others return values as "dB/10" or "dBm/10" (the latter with an offset to make the value positive, since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength() and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to map these values into the range 0...100, which is the normalized return value of these functions. Take a look at these two functions and maybe remove the comment characters from the lines //#define DEBUG_SIGNALSTRENGTH //#define DEBUG_SIGNALQUALITY in dvbdevice.c to get some debug output if your device doesn't return any directly useful values and may have to be added appropriately to the 'switch (subsystemId)' statement. The channel display of the 'sttng' skin uses these values to implement a signal strength/quality display. From the HISTORY file: - Fixed cString's operator=(const char *String) in case the given string is the same as the existing one (thanks to Dirk Leber). - Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm). - TsGetPayload() now checks if there actually is a payload in the given TS packet (reported by Dirk Leber). - Now sorting the source file names in the call to xgettext, to make sure the results are not dependent on the sequence of the files. Plugin authors may want to change the line containing the xgettext call in their Makefile accordingly by changing "$^" to "`ls $^`". - The primary device is now only avoided for recording if it is an old SD full featured card. This is done through the new function cDevice::AvoidRecording(). - Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl). - Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich). The return value of cDiseqcs::Get() is now const, so plugin authors may need to adjust their code if they use this function. - The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be used to determine the signal strength and quality of a given device (thanks to Rolf Ahrenberg for some input on how to use BER and UNC values to generate a "quality" value). - The 'sttng' skin now displays two colored bars at the bottom of the channel display, indicating the strength (upper bar) and quality (lower bar) of the received signal. The number to the left of these bars indicates the actual device the current channel is being received with. - Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries (reported by Johan Andersson). In order to fix this, the semantics of cFrameDetector had to be changed a little. See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new cFrameDetector::NewPayload() function. - The frame detector now only starts collecting PTS values after it has seen the first I-frame, otherwise it might get MaxPtsValues values and stop analyzing even though the incoming data is still garbage (reported by Derek Kelly). - The info file of a recording is now only overwritten with a new fps value if that new value is not the default value (thanks to Derek Kelly for reporting a problem with the fps value being overwritten in case a recording was interrupted and resumed, and the fps value could not be determined after resuming recording). - The initial channel is now stored by the channel ID in the setup.conf file, in order to avoid problems in case channels are reordered or deleted (reported by Lars Bläser). - Added support for "content identifier descriptor" and "default authority descriptor" to 'libsi' (thanks to Dave Pickles).	2011-06-19 18:35:46 +02:00
Klaus Schmidinger	8b9350c091	Version 1.7.18 ... - Changed -O2 to -O3 in Make.config.template (reported by Matti Lehtimäki). - Added a missing 'default' case in cPixmapMemory::DrawEllipse(). - Fixed some direct comparisons of double values. - Fixed detecting frames on channels that broadcast with separate "fields" instead of complete frames. - Made updating the editing marks during replay react faster in case the marks file has just been written (with a patch from Udo Richter). - Fixed horizontal scaling of subtitles (reported by Reinhard Nissl). - Stripped the note "The data returned by this function is only used for informational purposes (if any)" from the description of cDevice::GetVideoSize(). The VideoAspect is now used to properly scale subtitles. - Fixed cUnbufferedFile::Seek() in case it is compiled without USE_FADVISE (thanks to Juergen Lock). - Fixed the Language header of the Serbian translation file (thanks to Ville Skyttä). - Added anti-aliasing when upscaling bitmaps, which improves the display of SD subtitles when replayed on an HD OSD (thanks to Reinhard Nissl for his help in debugging). - Renamed cBitmap::Scale() to Scaled(), because it doesn't modify the bitmap itself, but rather returns a scaled copy. - Fixed the description of cReceiver in PLUGINS.html, regarding detaching a receiver from its device before deleting it (reported by Winfried Köhler). This change in behavior was introduced in version 1.5.7. - Fixed scaling subtitles in case the OSD size is exactly the same as the display size of the subtitles. - Added a missing initialization to sDvbSpuRect (reported by Sergiu Dotenco). - Replaced "%lld" and "%llX" print format specifiers with "PRId64" and "PRIX64" to avoid compiler warnings with gcc 4.5.2 (thanks to Sergiu Dotenco). On a personal note: I find it a step in the totally wrong direction that there have been macros introduced to work around this problem in the first place. There should have been "real" format specifiers defined that address this. These macros are nothing but an ugly workaround. - Added Cancel(3) to ~cTrueColorDemo() in the "osddemo" plugin (thanks to Reinhard Nissl). - Added a missing font deletion in cTrueColorDemo::Action() in the "osddemo" plugin (thanks to Reinhard Nissl). - Fixed a buffer overflow in cFont::Bidi() (thanks to Reinhard Nissl). - Added HD stream content identifiers to vdr.5 (thanks to Christoph Haubrich). - Made cRecordingInfo::Read(FILE *f) private to avoid calls to it from outside cRecordingInfo or cRecording (reported by Mika Laitio). - The dvbhddevice plugin is now part of the VDR distribution archive (thanks to Andreas Regel). - Removed an obsolete local variable in dvbsdffosd.c (thanks to Paul Menzel). - Fixed a possible NULL pointer dereference in osddemo.c (reported by Paul Menzel). - Now using pkg-config to get fribidi, freetype and fontconfig cflags and libs (thanks to Ville Skyttä). - The Makefile now also installs the include files (thanks to Ville Skyttä). - Added handling of "ANSI/SCTE 57" descriptors (thanks too Rolf Ahrenberg). - Avoiding an unecessary call to Recordings.ResetResume() (thanks to Reinhard Nissl).	2011-04-17 17:09:00 +02:00