mirror of
https://github.com/vdr-projects/vdr.git
synced 2025-03-01 10:50:46 +00:00
156831036e
- Fixed behaviour in case the shutdown didn't take place (there were many
"next timer event at..." messages in that case).
- Reduced the default value for MinEventTimeout to 30 minutes.
- Fixed detecting manual start in shutdown feature.
- An error message is now displayed in case the Transfer Mode can't be
started because the necessary DVB card is currently recording (or there
is no DVB card that can access this channel).
- Fixed toggling channels with the '0' key in case the "Ok" button has been
pressed to display the current/next information.
- Pressing the "Power" key now always initiates the shutdown sequence (after
user confirmation in case of a recording timer), event if there is currently
a menu or a replay session active. Note the additional remarks in INSTALL
regarding the values of the two parameters given to the shutdown program
in case of a currently recording timer.
- Switching through channel groups with the "Left" and "Right" keys now
always starts at the group that contains the current channel.
- Implemented "Multi Speed Mode" (thanks to Stefan Huelswitt).
- Implemented backtracing to hit the right spot after fast forward/rewind
(thanks to Stefan Huelswitt).
- Implemented replay mode display (thanks to Stefan Huelswitt, with a few
rewrites by kls).
- Changed the size of all input buffers used to parse config files or receive
SVDRP commands to the same value of 10KB. This allows long strings to be
used in the 'summary' field of a timer, for instance.
- The pipe to the Dolby Digital replay command (option '-a') now closes all
unused file descriptors in the child process to avoid crashing when the
OSD is used (thanks to Andreas Vitting).
- Switched to the driver's new tuning API (VDR now requires a driver version
dated 2001-09-14 or higher).
- Changed obsolete macro VIDEO_WINDOW_CHROMAKEY to VID_TYPE_CHROMAKEY (thanks
to Guido Fiala).
- New version of the "Master-Timer" tool (thanks to Matthias Schniedermeyer).
- Better error handling when writing configuration files.
- Fixed putting the final editing mark into the edited version's marks file.
- Fixed manipulating an editing mark at the very end of a recording.
- Fixed starting a new replay immediately after stopping a previous one (had
caused a mix between live video and replay).
- Three new keys ("Volume+", Volume-" and "Mute") to control the DVB card's
audio output volume.
- New version of the 'epg2timers' tool (thanks to Carsten Koch).
Video Disk Recorder ('VDR')
---------------------------
These files contain the source code of the "Video Disk Recorder",
which is based on the DVB driver of the LinuxTV project (http://linuxtv.org).
For details about the "Video Disk Recorder" project please
refer to http://www.cadsoft.de/people/kls/vdr.
There is also a remote control unit described on those
Web pages, which can be used within this program.
Please see the INSTALL file for details on how to install
this program on your computer.
The MANUAL file describes how to operate the VDR.
The author can be contacted at kls@cadsoft.de.
Yet another "set-top-box"?
--------------------------
The "set-top-boxes" available from commercial companies all have
one major drawback: they are not "open". This project's goal is
to build an "open" digital satellite receiver and timer controlled
video disk recorder, based upon open standards and freely available
driver software (of course, the hardware still has to be bought).
The on screen menu system is simple, but shall provide all the
possibilites necessary to perform timer controlled recording,
file management and even "on disk editing". The menus
of commercial set-top-boxes usually are a lot more fancy than
the ones in this system, but here we have the full source code
and can modify the menus in whatever way desired.
What do you think?
------------------
So, what do you think about this project? Does it make sense? Were you
able to use it? Do you have suggestions on how to improve it?
Please send email to kls@cadsoft.de if you'd like to comment on this.