Klaus Schmidinger a69b3211dc Version 0.67
- The EIT information is now gathered in a separate thread.
- The sytem time can now be synchronized to the time broadcast in the DVB data
  stream. This can be enabled in the "Setup" menu by setting "SetSystemTime" to
  1.  Note that this works only if VDR is running under a user id that has
  permisson to set the system time.
- The new item "Schedule" in the "Main" menu opens VDR's EPG (thanks to Robert
  Schneider). See the MANUAL file for a detailed description.
- The new setup parameters MarginStart and MarginStop define how long (in
  minutes) before the official start time of a broadcast VDR shall begin
  recording, and how long after the official end time it shall stop recording.
  These are used when a recording is programmed from the "Schedules" menu.
- The delay value in the dvb.c.071.diff patch to the driver has been increased
  to '3', because on some systems the OSD was not displayed correctly. If you
  are running an already patched version 0.71 driver and encounter problems
  with the OSD, please make sure the parameter in the ddelay call is '3', not
  '2'.
- Fixed initializing the RCU remote control code (didn't work after switching
  on the system).
- Problematic characters in recording names (which can come from timers that
  are programmed via the "Schedules" menu) are now replaced by suitable
  substitutes.
2000-11-01 18:00:00 +01:00
2000-09-10 18:00:00 +02:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-10-03 18:00:00 +02:00
2000-10-03 18:00:00 +02:00
2000-10-03 18:00:00 +02:00
2000-10-08 18:00:00 +02:00
2000-10-03 18:00:00 +02:00
2000-11-01 18:00:00 +01:00
2000-10-03 18:00:00 +02:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-05-27 18:00:00 +02:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-04-24 18:00:00 +02:00
2000-11-01 18:00:00 +01:00
2000-10-03 18:00:00 +02:00
2000-10-08 18:00:00 +02:00
2000-10-08 18:00:00 +02:00
2000-10-08 18:00:00 +02:00
2000-09-20 18:00:00 +02:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-09-20 18:00:00 +02:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-11-01 18:00:00 +01:00
2000-09-20 18:00:00 +02:00
2000-08-06 18:00:00 +02:00

On Screen Menu for the Video Disk Recorder
------------------------------------------

These files contain the source code of an on screen
menu for a video disk recorder based on the DVB driver
of the LinuxTV project (http://linuxtv.org).
For details about the "Video Disk Recorder" project please
refer to http://www.cadsoft.de/people/kls/vdr.

There is also a remote control unit described on those
Web pages, which can be used within this program.

Please see the INSTALL file for details on how to install
this program on your computer.

The author can be contacted at kls@cadsoft.de.

Yet another "set-top-box"?
--------------------------

The "set-top-boxes" available from commercial companies all have
one major drawback: they are not "open". This project's goal is
to build an "open" digital satellite receiver and timer controlled
video disk recorder, based upon open standards and freely available
driver software (of course, the hardware still has to be bought).

The on screen menu system is simple, but shall provide all the
possibilites necessary to perform timer controlled recording,
file management and, maybe, even "on disk editing". The menus
of commercial set-top-boxes usually are a lot more fancy than
the ones in this system, but here we have the full source code
and can modify the menus in whatever way desired.

What do you think?
------------------

So, what do you think about this project? Does it make sense? Were you
able to use it? Do you have suggestions on how to improve it?
Please send email to kls@cadsoft.de if you'd like to comment on this.

Description
Mirror of the official VDR GIT repository.
Readme 13 MiB
Languages
C 70.8%
C++ 21.3%
HTML 3.5%
Roff 1.9%
Makefile 1.2%
Other 1.2%