239 KiB
239 KiB
Ansible Playbooks for yaVDR 0.7
- User Stories
- Introduction
- Installing and configuring yaVDR with Ansible
- Playbooks
- Hosts
- Group Variables
- Roles
- install-dependencies
- nvidia experimental drivers
- yavdr-common
- default variables
- tasks
- main.yml
- Disable default installation of recommended packages
- Set up package repositories
- Use bash instead of dash
- create user vdr
- Disable release-upgrade notifications
- Install essential packages
- Install additional packages (user defined)
- create directories
- create sudoers drop-in for vdr
- basic scripts for standby support
- main.yml
- templates
- collect facts about the system with custom modules
- vdr
- STARTED yavdr-network
- vdr-plugin-menuorg
- nfs-server
- yavdr-remote
- pulseaudio
- yavdr-xorg
- yavdr-desktop
- samba-install
- samba-config
- STARTED autoinstall-drivers
- autoinstall-ubuntu-drivers
- autoinstall-virtualbox-guest
- autoinstall-atric-usb
- autoinstall-yausbir
- autoinstall-satip
- autoinstall-targavfd
- autoinstall-imonlcd
- autoinstall-libcecdaemon
- autoinstall-pvr350
- autoinstall-hauppauge-pvr
- autoinstall-firmware
- autoinstall-dvbsky-firmware
- autoinstall-dvbhddevice
- autoinstall-dvbsddevice
- autoinstall-hardware-irmp
- Serial IR Receivers
- kodi
- dvd
- vdr-epg-daemon
- install-sundtek
- template-test
- wakeup
- grub-config
- Modules
- Handlers
User Stories
yavdr-full
A User wants to install yaVDR without customization and relies on full automation.
After installing a supported Ubuntu Server version and (if needed) setting up the network connection, the install script is downloaded and started.
The install script adds the ansible PPA, installs ansible and other basic dependencies and runs the automated installation process.
Several roles are used to tie everything together:
- yavdr-common
- installs the basic set of packages needed and preconfigures the system (package sources, package manager settings, entires for network ports, directory structure etc.). Also collects information about the system
- autoinstall-ubuntu-drivers
- uses Ubuntu's automatic detection for additional drivers (e.g. proprietary nvidia driver, microcode updates, VirtualBox guest additions)
- vdr
- install the vdr package and required plugins
- pulseaudio
- install and preconfigure pulseaudio
- yavdr-network
- configure WOL, add nfs client capabilites, install avahi-linker
- samba-server
- install and preconfigure a samba server
- nfs-server
- install nfs-kernelserver and preconfigure nfs exports (and avahi-announcements)
- autoinstall-satip
- install vdr-plugin-satip if a Sat>IP server has been found
- autoinstall-targavfd
- install vdr-plugin-targavfd if display is connected
- autoinstall-imonlcd
- install vdr-plugin-imonlcd if a matchind display is connected
- yavdr-xorg
- install and configure a systemd user session with a running X-server. A frontend script will manage VDR's frontend and other applications like KODI. Also choose the best possible output plugin.
- grub-config
- update grub configuration based on executed roles
Introduction
One of the major problems we faced with customized Ubuntu ISO files as installation media for prior yaVDR versions has been the limited hardware support and the time consuming process to create and update them. An interesting alternative to this approach is to enable the user to choose the installation medium by himself, so point releases, kernel versions and additional drivers can be chosen deliberately. After the basic setup is complete (and a working internet connection is available), a fully customizable install script completes the yaVDR installation.
Installing and configuring yaVDR with Ansible
This is an experimental feature which allows to set up a yaVDR installation based on a normal Ubuntu Server 16.04.x installation using Ansible.
This Manual is written in org-mode for Emacs and can rewrite the complete ansible configuration if you call org-babel-tangle from within emacs.
To use this playbook on a Ubuntu Server Installation you need to run the following commands:
sudo apt-get install git
git clone https://github.com/yavdr/yavdr-ansible.git
cd yavdr-ansible
git checkout bionic
sudo ./install-yavdr.shWe use a callback to generate tags for all roles autmatically:
Install scripts for local usage
set -e
if (( $EUID != 0 )); then
echo "This script must be run using sudo -H or as root"
exit
fi
# update packages
apt update
apt -y install software-properties-common
add-apt-repository -y ppa:ansible/ansible-2.7
# install required packages
apt-get -y install --no-install-recommends ansible python-jmespath
# TODO: run ansible on local host
ansible-playbook yavdr07.yml -b -i 'localhost_inventory' --connection=local --tags="all"set -e
if (( $EUID != 0 )); then
echo "This script must be run using sudo -H or as root"
exit
fi
# update packages
apt update
apt -y install software-properties-common
add-apt-repository -y ppa:ansible/ansible-2.7
# install required packages
apt-get -y install --no-install-recommends ansible python-jmespath
# TODO: run ansible on local host
ansible-playbook yavdr07-headless.yml -b -i 'localhost_inventory' --connection=local --tags="all"Playbooks
yavdr07.yml
The yavdr07.yml playbook sets up a fully-featured yaVDR installation:
---
# file: yavdr07.yml
# this playbook sets up a complete yaVDR 0.7 installation
- name: set up yaVDR
hosts: all
become: true
roles:
- yavdr-common # install and configure the basic system
- collect-facts # query system facts
- autoinstall-ubuntu-drivers # use ubuntu-drivers to install proprietary dirvers
# (e.g. nvidia, virtualbox)
# - nvidia-experimental # install very recent nvidia dirver from ppa:graphics-drivers/ppa
- vdr # install vdr and related packages
- autoinstall-virtualbox-guest
- yavdr-network # enable network client capabilities
- samba-install # install samba server
- samba-config # configure samba server
- nfs-server # install nfs server
- pulseaudio # install pulseaudio
- yavdr-xorg # graphical session
- yavdr-remote # remote configuration files, services and scripts
- yavdr-desktop # openbox session with yavdr frontend script
- autoinstall-satip # install vdr-plugin-satip if a Sat>IP server has been found
- autoinstall-targavfd # install vdr-plugin-targavfd if display is connected
- autoinstall-imonlcd # install vdr-plugin-imonlcd if a matchind display is connected
- autoinstall-pvr350 # install vdr-plugin-pvr350 if a matching card is detected
- autoinstall-hauppauge-pvr # install vdr-plugin-pvrinput if a matching card is found
- autoinstall-dvbsddevice # install vdr-plugin-dvbsddevice if a matching card is detected
- autoinstall-hardware-irmp # install yavdr-hardware-irmp if a matching usb device is detected
- autoinstall-atric-usb # preconfigure lircd for Atric IR-WakeupUSB receiver
- autoinstall-yausbir # preconfigure lircd for yaUsbIR receiver
- autoinstall-dvbsky-firmware # download and install required firmware files for dvbsky cards
- autoinstall-firmware # download and install firmware files for dvb devices
#- serial-ir # configure a serial port for "homebrew" ir receivers (e.g. Atric V5)
#- epgd # install vdr-epg-daemon (and vdr-plugin-epg2vdr)
- kodi
- dvd # set up packages and a udev rule to allow kodi and other players
# to play and eject optical media
- wakeup # set up wakeup methods for rtc etc.
- grub-config # configure grub
handlers:
- import_tasks: handlers/main.ymlyavdr07-headless.yml
For a headless server installation yavdr07-headless.yml is a good choice
---
# file: yavdr07-headless.yml
# this playbook set up a headless yaVDR 0.7 installation
- name: set up a headless yaVDR server
hosts: all
become: true
roles:
- yavdr-common
- collect-facts # query system facts
- vdr
- yavdr-network
- samba-install
- samba-config
- nfs-server
- grub-config
- autoinstall-satip # install vdr-plugin-satip if a Sat>IP server has been found
- autoinstall-pvr350 # install vdr-plugin-pvr350 if a matching card is detected
- autoinstall-hauppauge-pvr # install vdr-plugin-pvrinput if a matching card is found
- autoinstall-dvbsddevice # install vdr-plugin-dvbsddevice if a matching card is detected
- autoinstall-dvbsky-firmware # download and install required firmware files for dvbsky cards
- autoinstall-firmware # download and install firmware files for dvb devices
#- epgd # install vdr-epg-daemon
- wakeup
tags:
- always
handlers:
- import_tasks: handlers/main.ymlHosts
This playbook can either be used to run the installation on the localhost or any other PC in the network that can be accessed via ssh. Simply add the host names or IP addresses to the hosts file in the respective section:
[local]
localhost connection=localGroup Variables
PPAs
---
# file: group_vars/all
branch: experimental
ppa_owner: 'ppa:yavdr'
# add the following PPAs
repositories:
- '{{ ppa_owner }}/{{branch}}-main'
- '{{ ppa_owner }}/{{branch}}-vdr'
- '{{ ppa_owner }}/{{branch}}-kodi'
#- '{{ ppa_owner }}/{{branch}}-yavdr'VDR user, directories, special configuration and plugins
# properties of the user vdr and vdr-related options
# NOTE: user name, uid and confdir must match the values set by the vdr package
vdr:
user: vdr
group: vdr
uid: 666
gid: 666
home: /var/lib/vdr
etc_confdir: /etc/vdr
confdir: /var/lib/vdr
recdir: /srv/vdr/video
hide_first_recording_level: false
safe_dirnames: true # escape characters (useful for windows clients and FAT/NTFS file systems)
override_vdr_charset: false
# copy channels.conf from a local file
# vdr_channels_conf: /path/to/channels.conf
# download channels.conf from a given url (supports HTTP(S) and FTP)
# vdr_channels_conf_url: http://example.com/vdr/channels.conf
# add the vdr plugins you want to install
vdr_plugins:
- vdr-plugin-devstatus
- vdr-plugin-markad
- vdr-plugin-softhddevice-vpp
# IP (range) filter for vdr and plugins (this must be an array):
# vdr_allowed_hosts:
# - 192.168.0.0/24
#
# hosts and subnets for svdrphosts.conf (overrides vdr_allowed_hosts):
# vdr_svdrphosts:
# - 192.168.0.0/24
#
# hosts and subnets for allowed_hosts.conf of xineliboutput (overrides vdr_allowed_hosts):
# xineliboutput_allowed_hosts:
# - 192.168.0.0/24
#
# hosts and subnets for allowed_hosts.conf of vnsiserver (overrides vdr_allowed_hosts):
# vnsiserver_allowed_hosts:
# - 192.168.0.0/24
#
# hosts and subnets for streamdevhosts.conf (overrides vdr_allowed_hosts):
# streamdev_server_allowed_hosts:
# - 192.168.0.0/24Media directories
# dictionary of directories for (shared) files. Automatically exported via NFS and Samba if those roles are enabled
media_dirs:
audio: /srv/audio
video: /srv/video
pictures: /srv/picture
files: /srv/files
backups: /srv/backups
recordings: '{{ vdr.recdir }}'NFS
nfs:
insecure: false # set to true for OS X clients or if you plan to use libnfs as unprivileged user (e.g. KODI)Samba
samba:
workgroup: YAVDR
windows_compatible: '{{ vdr.safe_dirnames }}' # set to true to disable unix extensions, enable follow symlinks and wide linksAdditional packages
# additional packages you want to install
extra_packages:
- bpython
- bpython3
- htop
- tree
- vim
- w-scan
- t2scan
- plymouth-theme-yavdr-logo
- vdr-addon-lifeguard-ng
- vdrpbdSystem pre-configuration
frontend: vdr
# vdr shutdown command - SHUTDOWNCMD variable in /etc/default/vdr
# for standby use "/bin/systemctl suspend"
vdr_shutdown_command: poweroff
#system:
# shutdown: poweroff
wakeup_method: acpiwakeup
grub:
timeout: 0
boot_options: quiet splashSerial IR
# Serial device to configure for a homebrew receiver.
# Choose either ttyS0 (COM1) or ttyS1 (COM2)
# Also ensure that the role serial-ir is enabled in yavdr07.yml
serial_ir_device: ttyS0Roles
install-dependencies
tasks
main.yml
---
- name: apt | install packages
apt:
name: '{{ packages }}'
state: present
install_recommends: no
cache_valid_time: 60nvidia experimental drivers
install nvidia-396 from ppa:graphics-drivers/ppa
tasks
main.yml
---
- name: add ppa:graphics-drivers/ppa
apt_repository:
repo: 'ppa:graphics-drivers/ppa'
state: present
update_cache: yes
tags:
- ppa
- name: install nvidia-396 and other required packages
apt:
name:
- nvidia-396
- nvidia-settings
state: present
install_recommends: no
tags:
- packagesyavdr-common
This role is used to set up a basic yaVDR installation. It creates the directories, installs the vdr and other useful packages.
default variables
This section is for reference only, please use the files in global_vars for customizations.
---
# file: roles/yavdr-common/defaults/main.ymlRepositories
You can set a list of package repositories which provide the necessary packages. Feel free to use own PPAs if you need special customization to the VDR and it's plugins.
branch: unstable
repositories:
- 'ppa:yavdr/main'
- 'ppa:yavdr/unstable-main'
- 'ppa:yavdr/{{branch}}-vdr'
- 'ppa:yavdr/{{branch}}-kodi'
- 'ppa:yavdr/{{branch}}-yavdr'Drivers
Automatically installed drivers can be very useful, but if you know you need a certain driver, you can simply set it's value to true. If you don't want a driver to be installed, set it's value to false.
drivers:
sundtek: auto
ddvb-dkms: autoAdditional Packages
Add additional packages you would like to have on your installation to this list
extra_packages:
- vim
- tree
- w-scanVDR
This section allows you to set the recording directory, the user and group that runs the vdr and it's home directory.
- user
- the vdr user name
- group
- the main group for the user vdr
- uid
- the user id for the user vdr
- gid
- the group id for the group vdr
- home
- the home directory for the user vdr
- recdir
- the recording directory used by VDR
- hide_first_recording_level
- let vdr hide the first directory level of it's recording directory so the content of multiple directories is shown merged together
- safe_dirnames
- replace special characters which are not compatible with Windows file systems and Samba shares
- override_vdr_charset
- workaround for channels with weird EPG encodings, e.g. Sky
vdr:
user: vdr
group: vdr
uid: 666
gid: 666
home: /var/lib/vdr
recdir: /srv/vdr/video
hide_first_recording_level: false
safe_dirnames: true
override_vdr_charset: false
vdr_allowed_hosts: []tasks
yavdr-common executes the following tasks:
main.yml
---
# file: roles/yavdr-common/tasks/main.yml
- name: basic installation
block:
- import_tasks: configure_apt.yml
- import_tasks: configure_system.yml
- import_tasks: create_directories.yml
- import_tasks: create_sudoers.yml
- import_tasks: standby_support.yml
tags: [install]Disable default installation of recommended packages
This task prevents apt to automatically install all recommended dependencies for packages:
---
- name: apt | prevent automatic installation of recommended packages
template:
src: templates/90-norecommends.j2
dest: /etc/apt/apt.conf.d/90norecommendsSet up package repositories
- name: add PPAs
apt_repository:
repo: '{{ item }}'
state: present
update_cache: no
with_items: '{{ repositories }}'
tags:
- ppa
- name: run apt-get dist-upgrade
apt:
upgrade: dist
update_cache: yesUse bash instead of dash
- name: use bash instead of dash
shell: |
echo "set dash/sh false" | debconf-communicate
dpkg-reconfigure -f noninteractive dash create user vdr
Disable release-upgrade notifications
- State "SOMEDAY" from "TODO" [2017-11-22 Mi 10:59]
- name: disable release-upgrade notifications
lineinfile:
dest: /etc/update-manager/release-upgrades
backrefs: yes
state: present
regexp: '^(Prompt=).*$'
line: '\1never'
ignore_errors: yes
with_first_found:
- files:
- /etc/update-manager/release-upgrades
skip: trueInstall essential packages
- name: apt | install basic packages
apt:
name:
- anacron
- acl
- at
- bash-completion
#- biosdevname # caution: may change device names after a minimal installation!
- debconf-utils
- linux-firmware
- psmisc
- python-jmespath
- python-kmodpy
- python-requests
- python-usb
- python3-usb
- software-properties-common
- ssh
- wget
- wpasupplicant
- usbutils
- xfsprogs
- yavdr-i18n
state: present
install_recommends: noInstall additional packages (user defined)
- name: apt | install extra packages
apt:
name: '{{ extra_packages }}'
state: present
install_recommends: nocreate directories
create sudoers drop-in for vdr
basic scripts for standby support
Stop vdr before entering suspend and unload dvb modules, reverse this operation on resume
templates
{{ ansible_managed | comment('c') }}
// Recommends are as of now still abused in many packages
APT::Install-Recommends "0";
APT::Install-Suggests "0";yavdr sudoers drop-in
Allow the vdr user to restart vdr.service and reboot the system
{{ vdr.user }} ALL=NOPASSWD: /bin/systemctl --no-block restart vdr.service
{{ vdr.user }} ALL=NOPASSWD: /bin/systemctl --no-block rebootsuspend hooks
#!/bin/bash
{{ ansible_managed | comment }}
case $1 in
pre)
/bin/systemctl stop vdr
/usr/local/bin/module-helper -u dvb_core
;;
post)
# reload rc-core keytables
[ -x /usr/bin/ir-keytable ] && {
for remote in $(ir-keytable 2>&1 | grep rc/rc | egrep -o "rc[0-9]{1,}")
do
ir-keytable -a /etc/rc_maps.cfg --sysdev $remote
done
}
/usr/local/bin/module-helper -r
/bin/systemctl start vdr
;;
esacmodule-helper
#!/usr/bin/env python3
# {{ ansible_managed | comment }}
# based on http://www.e-tobi.net/blog/files/module-helper
# http://www.e-tobi.net/blog/2010/11/06/squeeze-vdr-teil-9-suspend-to-ram
# ported to python3 by Alexander Grothe
#
# This script resolves linux kernel module dependencies automatically, so only
# the base module has to be specified (e.g. dvb_core)
import argparse
import subprocess
import pickle
dependency_map = {}
def find_dependencies(module, dependencies=[]):
dependencies.append(module)
if module in dependency_map:
for dependency in dependency_map[module]:
find_dependencies(dependency, dependencies)
return dependencies
def build_module_dependency_map():
with subprocess.Popen(['lsmod'],
stdout=subprocess.PIPE,
universal_newlines=True
) as p:
for line in p.stdout:
values = line.split()
if len(values) > 3:
#print("module {} depends on {}".format(values[0], values[3]))
dependency_map[values[0]] = values[3].split(',')
def run_command_on_module_list(command, module_list):
for module in module_list:
cmd = [command, module]
subprocess.call(cmd)
def create_argparser():
parser = argparse.ArgumentParser(description="load or unload modules")
group = parser.add_mutually_exclusive_group()
group.add_argument('-u', '--unload', metavar='MODULE', nargs='+',
help='unload modules')
group.add_argument('-r', '--reload', action='store_true',
help='reload modules')
parser.add_argument('-t', '--temp-file', nargs='?',
default='/tmp/modules.list',
help='''store names of unloaded modules in a file,
default location is /tmp/modules.list''')
return parser
if __name__ == '__main__':
parser = create_argparser()
args = parser.parse_args()
if args.unload:
build_module_dependency_map()
all_modules = []
for module in args.unload:
all_modules.extend(find_dependencies(module))
all_modules.reverse()
try:
with open(args.temp_file, 'wb') as f:
pickle.dump(all_modules, f)
run_command_on_module_list('rmmod', all_modules)
except Exception as e:
print(e)
pass
elif args.reload:
with open(args.temp_file, 'rb') as f:
all_modules = pickle.load(f)
run_command_on_module_list('modprobe', all_modules)
else:
parser.print_help()collect facts about the system with custom modules
variables
tasks
main.yml
- name: get information about usb and pci hardware and loaded kernel modules
hardware_facts:
usb: True
pci: True
modules: True
gpus: True
acpi_power_modes: True
tags:
- always
- debug:
var: '{{ item }}'
verbosity: 1
with_items:
- usb
- pci
- gpus
- modules
- acpi_power_modes
- nvidia_detected
- intel_detected
- amd_detected
- virtualbox_detected
- name: get detailed PCI device information
pci_facts:
tags:
- always
- debug:
var: pci_devices
verbosity: 1
- name: known vdr output plugins
set_fact:
vdr_output_plugins:
- softhddevice
- xineliboutput
- xinevdr
tasks
install the basic vdr packages
---
# file: roles/vdr/tasks/main.yml
- name: apt | install basic vdr packages
apt:
name:
- vdr
- vdrctl
- vdr-plugin-dbus2vdr
state: present
install_recommends: noAdd svdrp/svdrp-disc to /etc/services
- name: add svdrp and svdrp-disc to /etc/services
lineinfile:
dest: /etc/services
state: present
line: "{{ item }}"
with_items:
- "svdrp 6419/tcp"
- "svdrp-disc 6419/udp"Set up the recording directory for the vdr user
- name: create vdr recdir
file:
state: directory
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
mode: 0775
dest: '{{ vdr.recdir }}'
- name: set option to use hide-first-recording-level patch
blockinfile:
dest: /etc/vdr/conf.d/04-vdr-hide-first-recordinglevel.conf
create: true
state: "{{ 'present' if vdr.hide_first_recording_level else 'absent' }}"
block: |
[vdr]
--hide-first-recording-level
- name: create local dir in recdir
file:
state: directory
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
mode: '0775'
dest: '{{ vdr.recdir }}/local'
when:
vdr.hide_first_recording_level
# TODO: set recdir, user etc. in /etc/vdr/conf.d/Install additional vdr plugins
The additional plugins to install can be set in the variable {{vdr_plugins}} in the group variables
- name: apt | install additional vdr plugins
apt:
name: '{{ vdr_plugins | default([]) }}'
state: present
install_recommends: no
notify: [ 'Restart VDR' ]copy vdr configuration files (if they don't exist yet)
- name: ensure vdr is stopped
systemd:
name: vdr.service
state: stopped
notify: [ 'Start VDR' ]
- name: "vdr configuration | copy remote.conf if it doesn't exist yet"
copy:
src: files/remote.conf
dest: '{{ vdr.confdir }}/remote.conf'
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
mode: 0644
force: no
- name: "vdr configuration | copy keymacros.conf"
copy:
src: files/keymacros.conf
dest: '{{ vdr.etc_confdir }}/keymacros.conf'
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
mode: 0644
force: no
- name: "vdr configuration | copy channels.conf if it doesn't exist yet"
copy:
src: '{{ vdr_channels_conf }}'
dest: '{{ vdr.confdir }}/channels.conf'
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
mode: 0644
force: no
when: vdr_channels_conf is defined
- name: "vdr configuration | download channels.conf if it doesn't exist yet"
get_url:
url: '{{ vdr_channels_conf_url }}'
dest: '{{ vdr.confdir }}/channels.conf'
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
mode: 0644
force: no
when: vdr_channels_conf is not defined and vdr_channels_conf_url is defined
- name: "vdr configuration | svdrphosts.conf"
template:
src: templates/svdrphosts.conf.j2
dest: '{{ vdr.etc_confdir }}/svdrphosts.conf'
mode: 0644
vars:
svdrphosts: '{{ vdr_svdrphosts | default(vdr_allowed_hosts) }}'
- name: "vdr configuration | /etc/default/vdr"
template:
src: templates/default_vdr.j2
dest: /etc/default/vdrplugin preconfiguration
Set up IP resp. IP range based access for VDR plugins
xineliboutput
- name: ensure directory '/etc/vdr/xineliboutput' exists
file:
state: directory
mode: 0775
dest: '/etc/vdr/plugins/xineliboutput'
- name: "vdr configuration | allowed_hosts.conf for xineliboutput"
template:
src: templates/generic_allowed_hosts.conf.j2
dest: '/etc/vdr/plugins/{{ vdr_service }}/allowed_hosts.conf'
mode: 0644
vars:
allowed_hosts: '{{ xineliboutput_allowed_hosts | default(vdr_allowed_hosts) }}'
vdr_service: xineliboutput
- name: "vdr configuration | xineliboutput.conf host settings"
template:
src: templates/xineliboutput.conf.j2
dest: /etc/vdr/conf.avail/xineliboutput.conf
mode: 0644
vars:
allowed_hosts: '{{ xineliboutput_allowed_hosts | default(vdr_allowed_hosts) }}'vnsiserver
- name: ensure directory '/etc/vdr/plugins/vnsiserver' exists
file:
state: directory
mode: 0775
dest: '/etc/vdr/plugins/vnsiserver'
- name: "vdr configuration | allowed_hosts.conf for vnsiserver"
template:
src: templates/generic_allowed_hosts.conf.j2
dest: '/etc/vdr/plugins/{{ vdr_service }}/allowed_hosts.conf'
mode: 0644
vars:
allowed_hosts: '{{ vnsiserver_allowed_hosts | default(vdr_allowed_hosts) }}'
vdr_service: vnsiserverstreamdev-server
- name: ensure directory '/etc/vdr/plugins' exists
file:
state: directory
mode: 0775
dest: '/etc/vdr/plugins/'
- name: "vdr configuration | streamdevhosts.conf for streamdev-server"
template:
src: templates/generic_allowed_hosts.conf.j2
dest: '/etc/vdr/plugins/streamdevhosts.conf'
mode: 0644
vars:
allowed_hosts: '{{ streamdev_server_allowed_hosts | default(vdr_allowed_hosts) }}'
vdr_service: streamdev-serverstart vdr after network-online.target
- name: create directory for vdr.service systemd drop-in files
file:
dest: '{{ item }}'
state: directory
with_items:
- "/etc/systemd/system/vdr.service.d/"
- name: systemd-drop-in | start vdr.service after network-online.target
template:
src: templates/systemd/network-online.j2
dest: /etc/systemd/system/vdr.service.d/network-online.conftemplates
Systemd Drop-in to start vdr.service after network-online.target
{{ansible_managed | comment }}
[Unit]
After=network-online.target/etc/default/vdr
{{ ansible_managed | comment }}
# /etc/default/vdr
#
# See also /usr/share/doc/vdr/README.Debian.gz
#
SHUTDOWNCMD="{{ vdr_shutdown_command }}"svdrphosts.conf
{{ ansible_managed | comment }}
#
# svdrphosts This file describes a number of host addresses that
# are allowed to connect to the SVDRP port of the Video
# Disk Recorder (VDR) running on this system.
# Syntax:
#
# IP-Address[/Netmask]
#
# Examples:
# 192.168.100.0/24 # any host on the local net
# 204.152.189.113 # a specific host
# 0.0.0.0/0 # any host on any net (USE THIS WITH CARE!)
127.0.0.1 # always accept localhost
{% for host_or_subnet in svdrphosts %}
{{ host_or_subnet }}
{% endfor %}allowed_hosts.conf style template
{{ ansible_managed | comment }}
# This file describes a number of host addresses that
# are allowed to connect to the {{ vdr_service }}
# running with the Video Disk Recorder (VDR) on this system.
#
# Syntax:
#
# IP-Address[/Netmask]
#
# Examples:
#
# 192.168.100.0/24 # any host on the local net
# 204.152.189.113 # a specific host
{% if vdr_service == 'streamdev-server' %}
# 239.255.0.0/16 # uncomment for IGMP multicast streaming
{% endif %}
# 0.0.0.0/0 # any host on any net (USE THIS WITH CARE!)
127.0.0.1 # always accept localhost
{% for host_or_subnet in allowed_hosts %}
{{ host_or_subnet }}
{% endfor %}xineliboutput.conf template
#
# Command line parameters for vdr-plugin-xineliboutput
#
# For more details see:
# - /usr/share/doc/vdr-plugin-xineliboutput/README.Debian
# - `vdr --help -Pxineliboutput`
# - /usr/share/doc/vdr-plugin-xineliboutput/README
#
[xineliboutput]
--local=none
--primary
--remote={{ "" if allowed_hosts else "127.0.0.1" }}:37890
--truecolorfiles
remote.conf
LIRC.Up KEY_UP
LIRC.Down KEY_DOWN
LIRC.Menu KEY_MENU
LIRC.Ok KEY_OK
LIRC.Back KEY_ESC
LIRC.Left KEY_LEFT
LIRC.Right KEY_RIGHT
LIRC.Red KEY_RED
LIRC.Green KEY_GREEN
LIRC.Yellow KEY_YELLOW
LIRC.Blue KEY_BLUE
LIRC.0 KEY_0
LIRC.1 KEY_1
LIRC.2 KEY_2
LIRC.3 KEY_3
LIRC.4 KEY_4
LIRC.5 KEY_5
LIRC.6 KEY_6
LIRC.7 KEY_7
LIRC.8 KEY_8
LIRC.9 KEY_9
LIRC.Info KEY_INFO
LIRC.Play KEY_PLAY
LIRC.Pause KEY_PAUSE
LIRC.Play/Pause KEY_PLAYPAUSE
LIRC.Stop KEY_STOP
LIRC.Record KEY_RECORD
LIRC.FastFwd KEY_FASTFORWARD
LIRC.FastRew KEY_REWIND
LIRC.Next KEY_NEXT
LIRC.Prev KEY_BACK
LIRC.Power KEY_POWER2
LIRC.Channel+ KEY_CHANNELUP
LIRC.Channel- KEY_CHANNELDOWN
LIRC.PrevChannel KEY_PREVIOUS
LIRC.Volume+ KEY_VOLUMEUP
LIRC.Volume- KEY_VOLUMEDOWN
LIRC.Mute KEY_MUTE
LIRC.Subtitles KEY_SUBTITLE
LIRC.Schedule KEY_EPG
LIRC.Channels KEY_CHANNEL
LIRC.Commands KEY_FAVORITES
LIRC.Audio KEY_MODE
LIRC.Timers KEY_TIME
LIRC.Recordings KEY_PVR
LIRC.Setup KEY_SETUP
LIRC.User0 KEY_TEXT
LIRC.User1 KEY_PROG1
LIRC.User2 KEY_PROG2
LIRC.User3 KEY_PROG3
LIRC.User4 KEY_PROG4
LIRC.User5 KEY_AUDIO
LIRC.User6 KEY_VIDEO
LIRC.User7 KEY_IMAGES
LIRC.User8 KEY_FN
LIRC.User9 KEY_SCREEN
XKeySym.Up Up
XKeySym.Down Down
XKeySym.Menu Home
XKeySym.Menu Tab
XKeySym.Menu KP_Home
XKeySym.Ok Return
XKeySym.Ok KP_Enter
XKeySym.Back BackSpace
XKeySym.Back KP_Separator
XKeySym.Left Left
XKeySym.Right Right
XKeySym.Up KP_Up
XKeySym.Down KP_Down
XKeySym.Left KP_Left
XKeySym.Right KP_Right
XKeySym.Red F1
XKeySym.Green F2
XKeySym.Yellow F3
XKeySym.Blue F4
XKeySym.0 0
XKeySym.1 1
XKeySym.2 2
XKeySym.3 3
XKeySym.4 4
XKeySym.5 5
XKeySym.6 6
XKeySym.7 7
XKeySym.8 8
XKeySym.9 9
XKeySym.0 KP_0
XKeySym.1 KP_1
XKeySym.2 KP_2
XKeySym.3 KP_3
XKeySym.4 KP_4
XKeySym.5 KP_5
XKeySym.6 KP_6
XKeySym.7 KP_7
XKeySym.8 KP_8
XKeySym.9 KP_9
XKeySym.Info End
XKeySym.Info KP_End
XKeySym.Pause F9
XKeySym.FastFwd F6
XKeySym.FastRew F5
XKeySym.Power Pause
XKeySym.Volume+ F12
XKeySym.Volume- F11
XKeySym.Volume+ KP_Add
XKeySym.Volume- KP_Subtract
XKeySym.Mute F10
XKeySym.User1 F5
XKeySym.User2 F6
XKeySym.User3 F7
XKeySym.User4 F8
XKeySym.User5 Print
XKeySym.User6 Scroll_Lock
XKeySym.User7 Insert
XKeySym.User8 KP_Divide
XKeySym.User9 KP_Multiply
XKeySym.Audio Menu
XKeySym.Channel+ Prior
XKeySym.Channel- Next
XKeySym.Channel+ KP_Prior
XKeySym.Channel- KP_Next
XKeySym.Volume+ XF86AudioRaiseVolume
XKeySym.Volume- XF86AudioLowerVolume
XKeySym.Mute XF86AudioMute
XKeySym.Stop XF86AudioStop
XKeySym.Play/Pause XF86AudioPlay
XKeySym.Prev XF86AudioPrev
XKeySym.Next XF86AudioNextkeymacros.conf
# Remote control key macros for VDR
#
# Format:
#
# macrokey key1 key2 key3...
# macrokey @plugin key1 key2 key3...
#
# See man vdr(5)
Red Recordings
Green Schedule
Yellow Info
Blue Timers
User0 @osdteletextSTARTED yavdr-network
default variables
install_avahi: truetasks
---
# this playbook sets up network services for a yaVDR installation
- name: apt | install packages for network services
apt:
name:
- avahi-daemon
- avahi-utils
#- biosdevname # caution: this may change device names after a minimal installation!
- ethtool
- nfs-common
- vdr-addon-avahi-linker
- wakeonlan
state: present
install_recommends: no
# Does this really work? We need a way to check if an interface supports WOL - Python Skript?
# - name: check WOL capabilities of network interfaces
# shell: 'ethtool {{ item }} | grep -Po "(?<=Supports\sWake-on:\s).*$"'
# register: wol
# with_items: '{% for interface in ansible_interfaces if interface != 'lo' and interface != 'bond0' %}'
- name: restart autofs if running
systemd:
name: autofs
state: restarted
enabled: yes
masked: no
- name: ensure autofs is running
systemd:
name: autofs
state: started
enabled: yes
masked: no
- name: restart avahi-linker if running
systemd:
name: avahi-linker
state: restarted
enabled: yes
masked: no
- name: start avahi-linker
systemd:
name: avahi-linker
state: started
enabled: yes
masked: no
- name: enable and start additional services for avahi-linker
systemd:
name: '{{ item }}'
state: started
enabled: yes
masked: no
with_items:
- vdr-net-monitor
- vdr-update-monitor
- prevent-umount-on-pausevdr-plugin-menuorg
tasks
---
# file: roles/vdr-plugin-menuorg/tasks/main.yml
- name: apt | install vdr-plugin-menuorg and yavdr-i18n
apt:
name:
- vdr-plugin-menuorg
- yavdr-i18n
state: present
install_recommends: no
- name: create /var/lib/vdr/plugins/menuorg.xml
template:
src: templates/menuorg.xml.j2
dest: /var/lib/vdr/plugins/menuorg.xmltemplates
<?xml version="1.0" encoding="UTF-8"?>
{{ ansible_managed | comment('xml') }}
<!--
This is the config file for the Menuorg plug-in.
See /usr/share/doc/vdr-plugin-menurg for examples and a full
description of the config file format.
-->
<menus>
<system name="Schedule" />
<system name="Channels" />
<system name="Timers" />
<system name="Recordings" />
<plugin name="tvguide" />
<command name="Kodi" execute="frontend-dbus-send switchto kodi" />
<plugin name="desktop" />
<menu name="{{ 'VDR Plugins' | translate }}">
<plugin name="epgsearchonly" />
<plugin name="quickepgsearch" />
<plugin name="conflictcheckonly" />
<plugin name="markad" />
<plugin name="recsearch" />
<plugin name="undelete" />
<plugin name="radio" />
<plugin name="osd2web" />
</menu>
<menu name="{{ 'System' | translate }}">
<menu name="{{ 'Commands' | translate }}">
<command name="{{ "Safely remove usb mass storage" | translate }}" confirm="yes" execute="/usr/bin/vdr-mounter --unmount-all &> /dev/null" />
<command name="{{ "Update vdr recordings list" | translate }}" execute="/usr/bin/vdr-dbus-send /Recordings recording.Update &> /dev/null " />
<command name="{{ "Restart VDR" |translate }}" confirm="yes" execute="sudo /sbin/initctl restart vdr" />
<command name="{{ "Reboot system"| translate }}" confirm="yes" execute="/usr/bin/at now -M -f /usr/bin/vdr-reboot" />
<command name="{{ "Shutdown system" | translate }}" execute="/usr/bin/lircd2uinput-send KEY_POWER2 &> /dev/null & " />
</menu>
<system name="Setup" />
<plugin name="femon" />
<plugin name="devstatus" />
<plugin name="epg2vdr" />
<plugin name="scraper2vdr" />
<plugin name="sndctl" />
<plugin name="suspendoutput" />
<plugin name="recstatus" />
<plugin name="dynamite" />
<plugin name="noepgmenu" />
<plugin name="systeminfo" />
<plugin name="filebrowser" />
<plugin name="pin" />
<plugin name="pulsecontrol" />
<plugin name="softhddevice" />
</menu>
<system name="Commands" />
</menus>nfs-server
TODO avahi-services für NFS beim Stoppen des nfs-kernel-servers depublizieren, beim Start wieder announcen
tasks
---
- name: install nfs server packages
apt:
name:
- nfs-kernel-server
- nfs-common
state: present
install_recommends: no
- name: create /etc/exports
template:
src: templates/nfs-exports.j2
dest: /etc/exports
notify: [ 'Restart NFS Kernel Server' ]
- name: populate /etc/avahi/services
template:
src: templates/avahi/service.j2
dest: '/etc/avahi/services/yavdr-{{ item.key }}.service'
with_dict: '{{ media_dirs }}'templates
/etc/exports
/srv *(rw,fsid=0,sync,no_subtree_check,all_squash,anongid={{ vdr.gid }},anonuid={{ vdr.uid }})
{% for name, path in media_dirs.items() | list %}
{{ path }} *(rw,fsid={{ loop.index }},sync,no_subtree_check,all_squash,anongid={{ vdr.gid }},anonuid={{ vdr.uid }}{{ ',insecure' if nfs.insecure else '' }})
{% endfor %}avahi services
<?xml version="1.0" standalone='no'?>
<!DOCTYPE service-group SYSTEM "avahi-service.dtd">
<service-group>
<name replace-wildcards="yes">{{ item.key|capitalize }} on %h</name> ## Name
<service>
<type>_nfs._tcp</type>
<port>2049</port>
<txt-record>path={{ item.value }}</txt-record> ## path to shared Folder
<txt-record>subtype={{ 'vdr' if item.key == 'recordings' else item.key }}</txt-record> ## subtype
</service>
</service-group>yavdr-remote
The role yavdr-remote sets up the foundation for using eventlircd, lircd2uinput and the pre-configuration for remote receivers which can be detected by udev.
default variables
lircd0_socket: /var/run/lirc/lircd0tasks
---
# This role is used to set up the yaVDR remote control configuration.
- name: apt | install packages for remote support
apt:
name:
- yavdr-remote
- lirc
state: present
tags:
- packages
- name: add systemd drop-in for lircd to use lircd2uinput
block:
- name: create directory /etc/systemd/system/lircd.service.d/
file:
path: /etc/systemd/system/lircd.service.d/
state: directory
- name: expand template for /etc/systemd/system/lircd.service.d/lircd2uinput.conf
template:
src: templates/lircd.service.d/lircd2uinput.conf.j2
dest: /etc/systemd/system/lircd.service.d/lircd2uinput.conf
tags:
- config
- name: stop, mask and disable lircd.socket, lircd.service, lircmd.service and lircd-uinput.service # (the default lirc configuration conflicts with eventlircd)
systemd:
name: '{{ item }}'
enabled: no
state: stopped
masked: yes
with_items:
- lircd.service
- lircd.socket
- lircmd.service
- lircd-uinput.service
ignore_errors: yes
tags:
- systemd
- name: apt | install eventlircd and lircd2uinput
apt:
name:
- eventlircd
- lircd2uinput
state: present
tags:
- packages
- name: configure vdr to read from a lircd-compatible socket
template:
src: templates/03-vdr-lirc.conf.j2
dest: /etc/vdr/conf.d/03-vdr-lirc.conf
notify: ['Restart VDR']
tags:
- config
- name: expand template for /etc/rc_maps.cfg
template:
src: templates/rc_maps.cfg.j2
dest: /etc/rc_maps.cfg
notify: ['Trigger Udev']
tags:
- configtemplates
Systemd Drop-in to start vdr with lirc support
{% if frontend != 'kodi' %}
[vdr]
--lirc=/var/run/lirc/lircd
{% endif %}Systemd Drop-in to start lircd2uinput with lircd
[Service]
ExecStartPost=/usr/bin/lircd2uinput-add /var/run/lirc/lircd0
ExecStopPost=/usr/bin/lircd2uinput-remove /var/run/lirc/lircd0create /etc/rc_maps.cfg
{{ ansible_managed | comment }}
#
# Keymaps table
#
# This table creates an association between a keycode file and a kernel
# driver. It can be used to automatically override a keycode definition.
#
# Although not yet tested, it is mented to be added at udev.
#
# To use, you just need to run:
# ./ir-keytable -a
#
# Or, if the remote is not the first device:
# ./ir-keytable -a -s rc1 # for RC at rc1
#
# Format:
# driver - name of the driver provided via uevent - use * for any driver
# table - RC keymap table, provided via uevent - use * for any table
# file - file name. If directory is not specified, it will default to
# /etc/rc_keymaps.
# For example:
# driver table file
# cx8800 * ./keycodes/rc5_hauppauge_new
# * rc-avermedia-m135a-rm-jx ./keycodes/kworld_315u
# saa7134 rc-avermedia-m135a-rm-jx ./keycodes/keycodes/nec_terratec_cinergy_xs
# em28xx * ./keycodes/kworld_315u
# * * ./keycodes/rc5_hauppauge_new
# Table to automatically load the rc maps for the bundled IR's provided with the
# devices supported by the linux kernel
#driver table file
ite-cir rc-rc6-mce /lib/udev/rc_keymaps/rc-rc6-mce
nuvoton-cir rc-rc6-mce /lib/udev/rc_keymaps/rc-rc6-mce
serial_ir rc-rc6-mce /lib/udev/rc_keymaps/rc-rc6-mce
mceusb rc-rc6-mce /lib/udev/rc_keymaps/HOPLOrc6
# Hauppauge PVR 350
ir-kbd-i2c rc-hauppauge /lib/udev/rc_keymaps/rc-hauppauge
# imon-pad
imon rc-imon-mce /lib/udev/rc_keymaps/rc-imon-mce
imon rc-imon-pad /lib/udev/rc_keymaps/rc-imon-pad
# TT-1500/1501
budget_ci rc-tt-1500 /lib/udev/rc_keymaps/rc-tt-1501
# Skystarhd2
mantis_core * /lib/udev/rc_keymaps/skystarhd2
# Medion X10
ati_remote rc-medion-x10 /lib/udev/rc_keymaps/rc-medion-x10
ati_remote rc-medion-x10-or2x /lib/udev/rc_keymaps/rc-medion-x10-or2x
ati_remote rc-medion-x10-digitainer /lib/udev/rc_keymaps/rc-medion-x10-digitainer
# other devices (which still mostly need a customized keymap for yaVDR)
,* rc-adstech-dvb-t-pci adstech_dvb_t_pci
,* rc-alink-dtu-m alink_dtu_m
,* rc-anysee anysee
,* rc-apac-viewcomp apac_viewcomp
,* rc-asus-pc39 asus_pc39
,* rc-asus-ps3-100 asus_ps3_100
,* rc-ati-tv-wonder-hd-600 ati_tv_wonder_hd_600
,* rc-ati-x10 ati_x10
,* rc-avermedia-a16d avermedia_a16d
,* rc-avermedia-cardbus avermedia_cardbus
,* rc-avermedia-dvbt avermedia_dvbt
,* rc-avermedia-m135a avermedia_m135a
,* rc-avermedia-m733a-rm-k6 avermedia_m733a_rm_k6
,* rc-avermedia-rm-ks avermedia_rm_ks
,* rc-avermedia avermedia
,* rc-avertv-303 avertv_303
,* rc-azurewave-ad-tu700 azurewave_ad_tu700
,* rc-behold-columbus behold_columbus
,* rc-behold behold
,* rc-budget-ci-old budget_ci_old
,* rc-cec cec
,* rc-cinergy-1400 cinergy_1400
,* rc-cinergy cinergy
,* rc-delock-61959 delock_61959
,* rc-dib0700-nec dib0700_nec
,* rc-dib0700-rc5 dib0700_rc5
,* rc-digitalnow-tinytwin digitalnow_tinytwin
,* rc-digittrade digittrade
,* rc-dm1105-nec dm1105_nec
,* rc-dntv-live-dvb-t dntv_live_dvb_t
,* rc-dntv-live-dvbt-pro dntv_live_dvbt_pro
,* rc-dtt200u dtt200u
,* rc-dvbsky dvbsky
,* rc-em-terratec em_terratec
,* rc-encore-enltv-fm53 encore_enltv_fm53
,* rc-encore-enltv encore_enltv
,* rc-encore-enltv2 encore_enltv2
,* rc-evga-indtube evga_indtube
,* rc-eztv eztv
,* rc-flydvb flydvb
,* rc-flyvideo flyvideo
,* rc-fusionhdtv-mce fusionhdtv_mce
,* rc-gadmei-rm008z gadmei_rm008z
,* rc-genius-tvgo-a11mce genius_tvgo_a11mce
,* rc-gotview7135 gotview7135
,* rc-hauppauge /lib/udev/rc_keymaps/rc-hauppauge
,* rc-imon-mce /lib/udev/rc_keymaps/rc-imon-mce
,* rc-imon-pad /lib/udev/rc_keymaps/rc-imon-pad
,* rc-iodata-bctv7e iodata_bctv7e
,* rc-it913x-v1 it913x_v1
,* rc-it913x-v2 it913x_v2
,* rc-kaiomy kaiomy
,* rc-kworld-315u kworld_315u
,* rc-kworld-pc150u kworld_pc150u
,* rc-kworld-plus-tv-analog kworld_plus_tv_analog
,* rc-leadtek-y04g0051 leadtek_y04g0051
,* rc-lme2510 lme2510
,* rc-manli manli
#* rc-medion-x10-digitainer medion_x10_digitainer
#* rc-medion-x10-or2x medion_x10_or2x
#* rc-medion-x10 medion_x10
,* rc-msi-digivox-ii msi_digivox_ii
,* rc-msi-digivox-iii msi_digivox_iii
,* rc-msi-tvanywhere-plus msi_tvanywhere_plus
,* rc-msi-tvanywhere msi_tvanywhere
,* rc-nebula nebula
,* rc-nec-terratec-cinergy-xs nec_terratec_cinergy_xs
,* rc-norwood norwood
,* rc-npgtech npgtech
,* rc-pctv-sedna pctv_sedna
,* rc-pinnacle-color pinnacle_color
,* rc-pinnacle-grey pinnacle_grey
,* rc-pinnacle-pctv-hd pinnacle_pctv_hd
,* rc-pixelview-002t pixelview_002t
,* rc-pixelview-mk12 pixelview_mk12
,* rc-pixelview-new pixelview_new
,* rc-pixelview pixelview
,* rc-powercolor-real-angel powercolor_real_angel
,* rc-proteus-2309 proteus_2309
,* rc-purpletv purpletv
,* rc-pv951 pv951
,* rc-rc6-mce /lib/udev/rc_keymaps/rc-rc6-mce
,* rc-real-audio-220-32-keys real_audio_220_32_keys
,* rc-reddo reddo
,* rc-snapstream-firefly snapstream_firefly
,* rc-streamzap streamzap
,* rc-su3000 su3000
,* rc-tbs-nec tbs_nec
,* rc-technisat-ts35 technisat_ts35
,* rc-technisat-usb2 technisat_usb2
,* rc-terratec-cinergy-c-pci terratec_cinergy_c_pci
,* rc-terratec-cinergy-s2-hd terratec_cinergy_s2_hd
,* rc-terratec-cinergy-xs terratec_cinergy_xs
,* rc-terratec-slim-2 terratec_slim_2
,* rc-terratec-slim terratec_slim
,* rc-tevii-nec tevii_nec
,* rc-tivo tivo
,* rc-total-media-in-hand-02 total_media_in_hand_02
,* rc-total-media-in-hand total_media_in_hand
,* rc-trekstor trekstor
,* rc-tt-1500 /lib/udev/rc_keymaps/rc-tt-1500
,* rc-twinhan-dtv-cab-ci twinhan_dtv_cab_ci
,* rc-twinhan1027 twinhan_vp1027_dvbs
,* rc-videomate-k100 videomate_k100
,* rc-videomate-s350 videomate_s350
,* rc-videomate-tv-pvr videomate_tv_pvr
,* rc-winfast-usbii-deluxe winfast_usbii_deluxe
,* rc-winfast winfast
# * * a800 # found in a800.c
# * * af9005 # found in af9005-remote.c
# * * cinergyt2 # found in cinergyT2-core.c
# * * dvico_mce # found in cxusb.c
# * * dvico_portable # found in cxusb.c
# * * d680_dmb # found in cxusb.c
# * * dibusb # found in dibusb-common.c
# * * digitv # found in digitv.c
# * * megasky # found in m920x.c
# * * tvwalkerir-kbd-i2c # found in m920x.c
# * * pinnacle310e # found in m920x.c
# * * haupp # found in nova-t-usb2.c
# * * opera1 # found in opera1.c
# * * vp702x # found in vp702x.c
# * * vp7045 # found in vp7045.cpulseaudio
tasks
---
- name: apt | install pulseaudio, pavucontrol and vdr-plugin-pulsecontrol
apt:
name:
- pulseaudio
- pavucontrol
- vdr-plugin-pulsecontrol
state: present
install_recommends: no
- name: create /etc/asound.conf with pulseaudio as default device
template:
src: templates/alsa/asound.conf.j2
dest: /etc/asound.conftemplates
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
}
}
ctl.!default {
type pulse
fallback "sysdefault"
}yavdr-xorg
About the GUI session
The X-Server is started by using the two systemd units xlogin@.service and x@.service provided by the package xlogin. The former is enabled (and started) for the vdr user - which results (using the default settings for the user vdr with the uid 666) in the activation of xlogin@vdr.service when reaching the graphical.target. To simplify starting and stopping the X-server and the desktop session a yavdr-xorg.service is provided by the package yavdr-xorg, which depends on the two units mentioned before.
x@vt7.service is started automatically as a dependency of xlogin@vdr.service and starts the X-server. xlogin@vdr.service also starts a systemd user session using user@666.service.
In order to use the keyboard layout configured during installation for the X-Server we are using a script write-x11-keyboard-config, which reads the keyboard configuration from /etc/default/keyboard when starting x@.service and writes the file /etc/X11/xorg.conf.d/00-keyboard.conf (because systemd for Ubuntu (and Debian) has been patched not to automatically create the configuration file /etc/X11/xorg.conf.d/00-keyboard.conf according to the localectl settings).
To prevent stopping the X-server when vdr is running, additional dependencies are set up - see the drop-in rules created in /etc/systemd/system/vdr.service.d/.
Basic Services like the session DBus, pulseaudio etc. are started for the default.target of the session.
The openbox autostart script is used to update the systemd session with the needed session variables. It creates a file ~/.session-env which is used as an environment file by vdr.service (so the vdr knows the DISPLAY and can access pulseaudio).
The autostart script then enables all services to be pulled in by yavdr-desktop.target. As the last step yavdr-desktop.target is startet, which results in staring yavdr-frontend.service and additional Units for a second display (openbox and a browser for osd2eb, if available).
In order to achive a clean shutdown of the session, x@t7.service is set as a dependency of the systemd unit instance user@666.service and all processes within the session must be shutdown properly when stopping xlogin@vdr.service. If systemd units are used within the user session, they must stop their process(es) successfully (you should set them up to accept expected exit codes appropriately). The window manager openbox is started using the ~/.xinitrc and stopped using the systemd unit exit-wm.service (which runs on stopping the jobs pulled in by the default.target of the session).
default variables
preferred_outputs:
- HDMI
- DP
- DVI
- VGA
- TV
preferred_resolutions:
- 7680x4320
- 3840x2160
- 1920x1080
- 1280x720
- 720x576
preferred_refreshrates:
- 50
- 60tasks
main.yml
---
# file: roles/yavdr-xorg/tasks/main.yml
- import_tasks: setup-xorg.yml
tags: [install,update]
- import_tasks: detect-xorg.yml
tags: [xorg.detect,install]setup-xorg.yml
---
# file: roles/yavdr-xorg/tasks/setup-xorg.yml
- name: create directories for systemd drop-in files
file:
dest: '{{ item }}'
state: directory
with_items:
- "/etc/systemd/system/x@.service.d/"
- "/etc/systemd/system/vdr.service.d/"
- "/etc/systemd/system/user@{{ vdr.uid }}.service.d/"
- "/etc/X11/xorg.conf.d/"
- name: systemd-drop-in | add dependency to X-server for vdr.service
template:
src: templates/vdr-xorg.conf
dest: /etc/systemd/system/vdr.service.d/vdr-xorg.conf
- name: systemd-drop-in | start x@.service after plymouth.service
template:
src: templates/x@service.d/plymouth.conf.j2
dest: /etc/systemd/system/x@.service.d/plymouth.conf
- name: systemd-drop-in | start x@.service before xlogin@.service
template:
src: templates/x@service.d/xlogin.conf.j2
dest: /etc/systemd/system/x@.service.d/xlogin.conf
- name: systemd-drop-in | load environment file for vdr.service
template:
src: templates/systemd/vdr-environ.j2
dest: /etc/systemd/system/vdr.service.d/load-environ.conf
- name: systemd-drop-in | user@{{ vdr.uid }}.service depends on x@vt7.service
template:
src: templates/user@666.service.d/x-dependency.conf.j2
dest: '/etc/systemd/system/user@{{ vdr.uid }}.service.d/x-dependency.conf'
- name: vdr-config | start softhddevice detached and set audio to pulseaudio
lineinfile:
path: /etc/vdr/conf.avail/softhddevice.conf
line: '{{ item }}'
with_items:
- '-D'
- '-w alsa-driver-broken'
# - '-a pulse' # do we need this with our existing asound.conf?
- name: vdr-config | use vaapi for softhddevice if we got an intel IGP
lineinfile:
path: /etc/vdr/conf.avail/softhddevice.conf
line: '-v va-api'
state: '{{ "present" if (not nvidia_detected and intel_detected) else "absent" }}'
- name: add a login shell for the user vdr
user:
name: '{{ vdr.user }}'
shell: '/bin/bash'
state: present
uid: '{{ vdr.uid }}'
groups: '{{ vdr.group }}'
append: yes
- name: apt | install packages for xorg
apt:
name:
- xlogin
- yavdr-xorg
- xorg
- xserver-xorg-input-all
- xserver-xorg-video-all
- openbox
- python3-dbus2vdr
- python3-yavdrfrontend
- read-edid
- tmux
- vdr-plugin-desktop
- vdr-plugin-osd2web
- feh
#- yavdr-xorg
state: present
- name: apt | install packages for Intel IGP
apt:
name:
- xserver-xorg-video-intel
- i965-va-driver-shaders
state: present
when: intel_detected and not nvidia_detected
- name: Install yaVDR Media (e.g. Backgrounds)
apt:
name: yavdr-media
- name: command | write keyboard configuration to /etc/X11/xorg.conf.d/00-keyboard.conf
command: write-x11-keyboard-config
args:
creates: /etc/X11/xorg.conf.d/00-keyboard.conf
# NOTE: write-x11-keyboard-config is in the xlogin package
# Ubuntu's systemd is patched, so it does not create the file automatically
- name: add snippet to ignore eventlircd devices in xorg
template:
src: templates/xorg-ignore-eventlircd.conf.j2
dest: /etc/X11/xorg.conf.d/40-ignore-eventlircd.conf
- name: apt | install desktop programs
apt:
name:
- xterm
- firefox
- kiosk-browser
state: presentdetect-xorg.yml
---
# file: roles/yavdr-xorg/tasks/detect-xorg.yml
- name: "expand template for x-verbose@.service"
template:
src: "templates/systemd/system/x-verbose@.service.j2"
dest: "/etc/systemd/system/x-verbose@.service"
- name: "expand template for xorg-verbose.conf"
template:
src: "templates/xorg-verbose.conf.j2"
dest: "/etc/X11/xorg-verbose.conf"
- name: "remove intel snippet"
file:
path: /etc/X11/xorg.conf.d/20-intel.conf
state: absent
- name: Stop VDR
systemd:
name: vdr.service
state: stopped
enabled: yes
notify: ['Start VDR']
- name: Stop yavdr-xorg
systemd:
name: 'yavdr-xorg'
state: stopped
enabled: yes
notify: ['Start yavdr-xorg']
- name: Stop xlogin
systemd:
name: 'xlogin@{{ vdr.user }}.service'
state: stopped
notify: ['Start xlogin']
- name: Stop x
systemd:
name: x@vt7.service
state: stopped
- name: check if a nvidia driver has been installed
set_fact:
nvidia_driver_installed: '{{ "nvidia" in lookup("file", "/etc/yavdr/autoinstalled") }}'
- name: unload nouveau driver, replace with nvidia
block:
- name: unbind vconsole
shell: echo 0 > /sys/class/vtconsole/vtcon1/bind
- name: "wait a little, so noveau isn't used anymore"
wait_for:
timeout: 1
# unloading the drivers using the modprobe module does not work for some strange reason...
- name: unload kms drivers
rmmod:
name: '{{ item }}'
loop:
- nouveau
- ttm
- drm_kms_helper
- drm
- name: load nvidia driver
modprobe:
name: "nvidia"
state: present
- name: "wait a little before starting nvidia-persistenced"
wait_for:
timeout: 1
- name: start nvidia-persistenced
systemd:
name: "nvidia-persistenced"
state: started
enabled: true
masked: false
daemon_reload: true
when:
- nvidia_detected
- nvidia_driver_installed
- '"nouveau" in modules'
- name: "start x-verbose@.service"
systemd:
name: "x-verbose@vt7.service"
state: started
enabled: false
masked: false
daemon_reload: true
- name: "wait a little, so X has some time to start up"
wait_for:
timeout: 3
- name: "detect xorg configuration"
xrandr_facts:
preferred_refreshrates: '{{ preferred_refreshrates }}'
preferred_resolutions: '{{ preferred_resolutions }}'
preferred_outputs: '{{ preferred_outputs }}'
- debug:
var: xorg.primary
- debug:
var: xorg.secondary
when: xorg.secondary is defined
- debug:
var: drm
when: drm is defined
- name: "stop x-verbose@vt7.service"
systemd:
name: "x-verbose@vt7.service"
state: stopped
enabled: false
masked: true
#- name: "wait a little bit, so X has some time to shut down (needed?)"
# wait_for:
# timeout: 3
- name: save results
block:
- name: ensure facts.d directory exists
file:
state: directory
path: /etc/ansible/facts.d
- name: write xorg variable as local fact
copy:
content: '{{ {"xorg": xorg} | to_nice_json }}'
dest: /etc/ansible/facts.d/xorg.fact
- name: write xrandr variable as local fact
copy:
content: '{{ {"xrandr": xrandr} | to_nice_json }}'
dest: /etc/ansible/facts.d/xrandr.fact
- name: write drm variable as local fact
copy:
content: '{{ {"drm": drm} | to_nice_json }}'
dest: /etc/ansible/facts.d/drm.fact
when:
- xrandr is defined
- xorg is defined
- drm is defined
- name: update xorg, xrandr and drm variables with values from local facts if needed
set_fact:
xorg: '{{ ansible_local.xorg.xorg }}'
xrandr: '{{ ansible_local.xrandr.xrandr }}'
drm: '{{ ansible_local.drm.drm }}'
when:
- xrandr is undefined
- xorg is undefined
- drm is undefined
# TODO: expand template for xorg.conf (or snippets)
# with respect for the available graphics card driver
# nvidia, noveau, intel, radeon
- name: nvidia related config
block:
- name: create xorg.conf (for nvidia driver)
template:
src: templates/xorg.conf.j2
dest: /etc/X11/xorg.conf
backup: yes
when:
- nvidia_detected
- name: intel xorg config snippet
template:
src: templates/20-intel.conf.j2
dest: /etc/X11/xorg.conf.d/20-intel.conf
when:
- intel_detected and not nvidia_detected
- name: server flags config snippet to disable screen blanking
template:
src: templates/10-serverflags.conf.j2
dest: /etc/X11/xorg.conf.d/10-serverflags.confintel.yml
KMS drivers (like for intel (i915) and amd (radeon)) require additional configuration besides a customized xorg.conf - for a "static" output configuration (which works if the TV or AV receiver is not turned on) we need to force loading the display(s) EDID early during the boot process.
This task therefore performs the following actions after the xrandr detection has been executed:
- create an initramfs-hook to copy the EDID(s) into the initramfs
- get the connector names and match them to the ones determined by xrandr (this is done by xrandr_facts.py)
- add kernel boot arguments to set EDID and mode (refreshrate and resolution) for all outputs
- recreate and update initramfs and grub config
Please note that rescanning the connected displays works only after removing the forced loading of EDID(s) during boot (call clean-edids) and a reboot.
- name: "create initramfs hook to copy EDID files"
copy:
src: files/include-edid-data.sh
dest: '/etc/initramfs-tools/hooks/include-edid-data'
mode: 0755
force: yes
- name: "create /lib/firmware/edid"
file:
state: directory
dest: /lib/firmware/edid
# TODO:
# - write EDID files to /lib/firmware/edid/
# - complete template for grub.d
name: "add kernel boot parameters for static display configuration"
template:
src: templates/grub.d/intel.j2
dest: /etc/grub.d/99_intel
mode: 0755
notify: ['Update Initramfs', 'Update GRUB']templates
grub
{{ ansible_managed | comment }}
{% set output_flag = 'D' if ("HDMI" in xorg.primary.connector or "DVI" in xorg.primary.connector or "DP" in xorg.primary.connector) else 'e' %}
GRUB_CMDLINE_LINUX+=" video={{ drm.primary.drm_connector }}:{{ xorg.primary.mode|replace('_', '@') }}{{ output_flag }} drm.edid_firmware={{ drm.primary.drm_connector }}:edid/{{ drm.primary.edid }} {% for ignored_c in drm.ignored_outputs %}video={{ ignored_c }}:d{% endfor %}"xorg
x-verbose@.service
# file: roles/yavdr-xorg/templates/systemd/system/x-verbose@.service.j2
[Unit]
Description=X with verbose logging on %I
Wants=graphical.target
Before=graphical.target
[Service]
Type=forking
ExecStart=/usr/bin/x-daemon -logverbose 6 -noreset %I -config /etc/X11/xorg-verbose.confDrop-in snippet for x@.service
[Unit]
After=plymouth.service[Unit]
Before=xlogin@{{ vdr.user }}.service[Unit]
Wants=x@vt7.service
After=x@vt7.service
[Service]
TimeoutStopSec=20
KillMode=mixedDrop-in snippet for vdr.service
{{ ansible_managed | comment }}
[Unit]
After=x@vt7.service
Wants=x@vt7.service
#BindsTo=x@vt7.servicexorg.conf snippets
{{ ansible_managed | comment }}
Section "InputClass"
Identifier "exclude eventlircd devices"
MatchTag "eventlircd"
Option "Ignore" "True"
EndSectionintel graphics xorg.conf snippet
xorg.conf
{{ ansible_managed | comment }}
Section "Device"
Identifier "nvidia"
Driver "nvidia"
Option "DynamicTwinView" "true"
Option "NoFlip" "false"
EndSection
Section "Screen"
Identifier "screen"
Device "nvidia"
EndSection{{ ansible_managed | comment }}
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
{% if xorg.secondary is defined %}
Screen 1 "Screen1" RightOf "Screen0"
{% endif %}
#InputDevice "Keyboard0" "CoreKeyboard"
#InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "InputClass"
Identifier "exclude eventlircd devices"
MatchTag "eventlircd"
Option "Ignore" "True"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "{{ xorg.primary.vendor }}"
ModelName "{{ xorg.primary.model }}"
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
{% if xorg.primary.bus_id is defined %}
BoardName "{{ xorg.primary.gpu_name }}"
BusID "{{ xorg.primary.bus_id }}"
{% else %}
BoardName "Unknown"
{% endif %}
Screen 0
Option "ConnectedMonitor" "{{ xorg.primary.connector }}{% if xorg.secondary is defined %}, {{ xorg.secondary.connector }}{% endif %}"
Option "CustomEDID" "{{ xorg.primary.connector }}:/etc/X11/edid.{{ xorg.primary.connector }}.bin{% if xorg.secondary is defined %};{{ xorg.secondary.connector }}:/etc/X11/edid.{{ xorg.secondary.connector }}.bin{% endif %}"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "nvidiaXineramaInfoOrder" "{{ xorg.primary.connector }}"
Option "UseDisplayDevice" "{{ xorg.primary.connector }}"
Option "metamodes" "{{ xorg.primary.connector }}: {{ xorg.primary.mode }} +0+0 {ForceCompositionPipeline=Off, ForceFullCompositionPipeline=Off}"
Option "AllowIndirectGLXProtocol" "off"
Option "TripleBuffer" "on"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
{% if xorg.secondary is defined %}
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
{% if xorg.secondary.bus_id is defined %}
BoardName "{{ xorg.primary.gpu_name }}"
BusID "{{ xorg.primary.bus_id }}"
{% else %}
BoardName "Unknown"
{% endif %}
Screen 1
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "{{ xorg.secondary.vendor }}"
ModelName "{{ xorg.secondary.model }}"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "nvidiaXineramaInfoOrder" "{{ xorg.secondary.connector }}"
#Option "ConnectedMonitor" "{{ xorg.secondary.connector }}"
Option "UseDisplayDevice" "{{ xorg.secondary.connector }}"
#Option "CustomEDID" "{{ xorg.secondary.connector }}:/etc/X11/edid.{{ xorg.secondary.connector }}.bin"
Option "metamodes" "{{ xorg.secondary.connector }}: {{ xorg.secondary.mode }} +0+0 {ForceCompositionPipeline=Off, ForceFullCompositionPipeline=Off}"
Option "AllowIndirectGLXProtocol" "off"
Option "TripleBuffer" "on"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
{% endif %}
Section "Extensions"
Option "Composite" "Disable"
EndSection{{ ansible_managed | comment }}
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
{% if xorg.best_tv_mode.secondary is defined %}
Screen 1 "Screen1" RightOf "Screen0"
{% endif %}
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
# ignore devices with eventlircd tag
# ENV{ID_INPUT.tags}+="eventlircd"
# must be set by an udev rule
Section "InputClass"
Identifier "ignore eventlircd devices"
MatchTag "eventlircd"
Option "Ignore" "True"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
{# TODO: VGA2SCART support (if needed)
{% if system.x11.display.0.default == "VGA2Scart_4_3" or system.x11.display.0.default == "VGA2Scart_16_9" %}
HorizSync 14-17
VertRefresh 49-61
{% if system.x11.display.0.default == "VGA2Scart_4_3" %}
Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace
{% elif system.x11.display.0.default == "VGA2Scart_16_9" %}
Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace
{% endif %}
{% endif %}
#}
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
EndSection
{% if xrandr.best_tv_mode.secondary is defined %}
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Unknown"
{#
{% if system.x11.display.1.default in ("VGA2Scart_4_3", "VGA2Scart_16_9") %}
HorizSync 14-17
VertRefresh 49-61
{% if system.x11.display.1.default == "VGA2Scart_4_3" %}
Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace
{% elif system.x11.display.1.default == "VGA2Scart_16_9" %}
Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace
{% endif %}
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
{% endif %}
#}
EndSection
{% endif %}
Section "Device"
Identifier "Device0"
{% if system.hardware.nvidia.detected %}
Driver "nvidia"
VendorName "NVIDIA Corporation"
{% endif %}
Screen 0
Option "DPI" "100x100"
{% if system.hardware.nvidia.busid is defined and system.hardware.busid %}
BusID "PCI: {{ system.hardware.nvidia.busid }}"
{% endif %}
Option "NoLogo" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "False"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "DynamicTwinView" "0"
Option "OnDemandVBlankinterrupts" "on"
Option "FlatPanelProperties" "Scaling = Native"
EndSection
{% if xrandr.best_tv_mode.secondary is defined %}
Section "Device"
Identifier "Device1"
{% if system.hardware.nvidia.detected %}
Driver "nvidia"
VendorName "NVIDIA Corporation"
{% endif %}
Screen 1
{% if system.hardware.nvidia.busid is defined and system.hardware.nvidia.busid %}
BusID "PCI: {{ system.hardware.nvidia.busid }}"
{% endif %}
Option "NoLogo" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "False"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "DynamicTwinView" "0"
EndSection
{% endif %}
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
{% if xrandr.best_tv_mode.primary is defined %}
Modes "{{ xrandr.best_tv_mode.primary.mode }}"{#{% for mode in xrandr %}{% if mode != system.x11.display.0.default %} "{{ mode }}"{% endif %}{% endfor %}#} nvidia-auto-select
{% elif system.hardware.nvidia.detected == 1 %}
Modes "nvidia-auto-select"
{% endif %}
EndSubSection
{% if system.x11.display.0.default or system.x11.default %}
{% if system.x11.display.0.device is definded and system.x11.display.0.device %}
Option "ConnectedMonitor" {{ system.x11.display.0.device }}
{% else %}
Option "ConnectedMonitor" {{ system.x11.default }}
{% endif %}
# Option "ConnectedMonitor" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?><?cs if:(?system.x11.dualhead.enabled && system.x11.dualhead.enabled == 1) ?>, <?cs call:fix_display_name(system.x11.display.1.device) ?><?cs /if ?>"
#Option "ConnectedMonitor"
"<?cs if:(?system.x11.display.0.device) ?>
<?cs call:fix_display_name(system.x11.display.0.device) ?>
<?cs else ?>
<?cs var:system.x11.default ?>
<?cs /if ?>
<?cs if:(?system.x11.dualhead.enabled && system.x11.dualhead.enabled == 1) ?>, <?cs call:fix_display_name(system.x11.display.1.device) ?><?cs /if ?>"
# Option "UseDisplayDevice" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?>"
# <?cs /if ?>
# <?cs if:(?system.hardware.nvidia.0.edid && system.hardware.nvidia.0.edid == "1") ?>
# Option "CustomEDID" "<?cs call:fix_display_name(system.x11.display.0.device) ?>:/etc/X11/edid.0.yavdr"
# <?cs /if ?>
# <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.0.device) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:system.x11.display.0.default ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }"
# <?cs each:mode = system.x11.display.0.mode ?><?cs if:(mode != system.x11.display.0.default) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?>
{% endif %}
EndSection
{% if system.x11.dualhead.enabled == "1" %}
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
{% if system.x11.display.0.default is defined and system.x11.display.0.default %}
Modes "{{ system.x11.display.1.default }}"{% for mode in system.x11.display.1.mode %}{% if mode != system.x11.display.1.default %} "{{ mode }}"{% endif %}{% endfor %}
{% elif system.hardware.nvidia.detected == "1" %}
Modes "nvidia-auto-select"
{% endif %}
EndSubSection
# <?cs if:(?system.x11.display.1.default && system.x11.display.1.default != "" && system.x11.display.1.default != "disabled") ?>
# Option "UseDisplayDevice" "<?cs call:fix_display_name(system.x11.display.1.device) ?>"
# <?cs /if ?>
# <?cs if:(?system.hardware.nvidia.1.edid && system.hardware.nvidia.1.edid == "1") ?>
# Option "CustomEDID" "<?cs call:fix_display_name(system.x11.display.1.device) ?>:/etc/X11/edid.1.yavdr"
# <?cs /if ?>
# <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.1.device) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:system.x11.display.1.default ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }"
# <?cs each:mode = system.x11.display.1.mode ?><?cs if:(mode != system.x11.display.1.default) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?>
# <?cs /if ?>
EndSection
{% endif %}snippet to disable screen blanking
{{ ansible_managed | comment }}
Section "ServerFlags"
Option "NoPM" "true"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
EndSectionvdr
Set environment variables for system locale and user session on startup
[Service]
EnvironmentFile=-/etc/default/locale
Environment=XDG_RUNTIME_DIR=/run/user/{{ vdr.uid }}/
EnvironmentFile=-/var/lib/vdr/.session-envfiles
initramfs EDID hook
#!/bin/bash
{{ ansible_managed | comment }}
# This hook copies EDID files with the naming scheme "edid.${OUTPUT}.bin" to the initramfs.
[ "$1" = "prereqs" ] && { echo "udev"; exit 0; }
# load hook helper functions
. /usr/share/initramfs-tools/hook-functions
rm /lib/firmware/edid/edid.*.bin
find "/etc/X11/" -name "edid.*.bin" -type f -exec cp -t "/lib/firmware/edid/" {} +
mkdir -p "${DESTDIR}/lib/firmware/edid"
find "/etc/X11/" -name "edid.*.bin" -type f -exec cp -t "${DESTDIR}/lib/firmware/edid/" {} +
manual_add_modules i915 radeon
exit 0yavdr-desktop
Tasks
main.yml
---
# file: roles/yavdr-desktop/tasks/main.yml
- name: create folders for user configuration files
file:
state: directory
dest: '{{ item }}'
mode: '0775'
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
with_items:
- '{{ vdr.home }}/.config/systemd/user'
- '{{ vdr.home }}/.config/openbox'
- '{{ vdr.home }}/.config/pulse'
- '{{ vdr.home }}/bin'
- name: expand template for .xinitrc for vdr user
template:
src: 'templates/.xinitrc.j2'
dest: '{{ vdr.home }}/.xinitrc'
mode: 0755
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: "expand template for vdr's .Xresources"
template:
src: 'templates/.Xresources.j2'
dest: '{{ vdr.home }}/.Xresources'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: expand template for openbox autostart
template:
src: 'templates/openbox/autostart.j2'
dest: '{{ vdr.home }}/.config/openbox/autostart'
mode: 0755
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: expand rc.xml for openbox
template:
src: 'templates/openbox/rc.xml.j2'
dest: '{{ vdr.home }}/.config/openbox/rc.xml'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: expand rc2.xml for openbox on second display
template:
src: 'templates/openbox/rc2.xml.j2'
dest: '{{ vdr.home }}/.config/openbox/rc2.xml'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: create yavdr-desktop.target for the user session
template:
src: 'templates/systemd/user/yavdr-desktop.target.j2'
dest: '{{ vdr.home }}/.config/systemd/user/yavdr-desktop.target'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: disable pulseaudio autospawning
lineinfile:
path: '{{ vdr.home }}/.config/pulse/client.conf'
line: 'autospawn = yes'
create: yes
state: present
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: create tmux.service for the session
template:
src: 'templates/systemd/user/tmux.service.j2'
dest: '{{ vdr.home }}/.config/systemd/user/tmux.service'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: create wm-exit.service for the session
template:
src: templates/systemd/user/wm-exit.service.j2
dest: '{{ vdr.home }}/.config/systemd/user/wm-exit.service'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: create detect-second-display.service for the session
template:
src: templates/systemd/user/detect-second-display.service.j2
dest: '{{ vdr.home }}/.config/systemd/user/detect-second-display.service'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: create detect-second-diplay script
template:
src: templates/bin/detect-second-display.j2
dest: '{{ vdr.home }}/bin/detect-second-display'
mode: 0755
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: create switch-displays script
template:
src: templates/bin/switch-displays.j2
dest: '{{ vdr.home }}/bin/switch-displays'
mode: 0755
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: create openbox-second.service for the session
template:
src: templates/systemd/user/openbox-second.service.j2
dest: '{{ vdr.home }}/.config/systemd/user/openbox-second.service'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- name: create osd2web.service for the session
template:
src: templates/systemd/user/osd2web.service.j2
dest: '{{ vdr.home }}/.config/systemd/user/osd2web.service'
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
mode: 0644
- name: create irexec configuration for the session
block:
- template:
src: templates/systemd/user/irexec.service.j2
dest: '{{ vdr.home }}/.config/systemd/user/irexec.service'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
- template:
src: templates/.lircrc.j2
dest: '{{ vdr.home }}/.lircrc'
mode: 0644
owner: '{{ vdr.user }}'
group: '{{ vdr.group }}'
force: no
- name: set up udiskie
include_tasks: udiskie.yml
- name: link /usr/bin/start-desktop to /var/lib/vdr/plugins/desktop/starter
file:
src: /usr/bin/start-desktop
dest: /var/lib/vdr/plugins/desktop/starter
state: link
- name: enable and start yavdr-xorg for the vdr user
systemd:
daemon_reload: yes
name: 'yavdr-xorg'
enabled: yes
state: startedudiskie.yml
- name: install udiskie
apt:
name:
- udiskie
- name: create ~/.config/udiskie
file:
name: '{{ vdr.home }}/.config/udiskie'
state: directory
- name: expand template for udiskie's config.yml
template:
src: templates/udiskie/config.yml.j2
dest: '{{ vdr.home }}/.config/udiskie/config.yml'
- name: expand template for mount helper script
template:
src: templates/udiskie/udiskie_vdr_mount_helper.j2
dest: '{{ vdr.home }}/bin/udiskie_vdr_mount_helper'
mode: 0755
owner: vdr
group: vdr
- name: expand template for udiskie vdr commands
template:
src: templates/udiskie/umount_all.j2
dest: /usr/share/vdr/command-hooks/commands.udiskie.confTemplates
xorg configuration
.Xresources
xterm*background: Black
xterm*foreground: grey
XTerm*locale: true
XTerm*metaSendsEscape: true
XTerm*eightBitInput: false
XTerm*backarrowKey: false
XTerm*ttyModes: erase ^?
Xterm*saveLines: 4096
XTerm.vt100.metaSendsEscape: true
XTerm.vt100.geometry: 80x32
XTerm.vt100.renderFont: true
xterm*faceName: xft:DejaVu Sans Mono
xterm*faceSize: 14
xterm*renderFont: true
XTerm.vt100.faceName: xft:DejaVu Sans Mono:size=12:antialias=false
XTerm.vt100.font: 7x13.xinitrc
#!/bin/bash
{{ ansible_managed | comment }}
exec openbox-sessionopenbox
autostart
# forward environment variables to an environment file and the systemd user session
env | grep "DISPLAY\|DBUS_SESSION_BUS_ADDRESS\|XDG_RUNTIME_DIR" > ~/.session-env
systemctl --user import-environment DISPLAY XAUTHORITY XDG_RUNTIME_DIR DBUS_SESSION_BUS_ADDRESS
feh --bg-center "/usr/share/yavdr/images/yavdr_logo.png"
enabled_services=(
"tmux.service" "detect-second-display.service"
"openbox-second.service" "osd2web.service"
"yavdr-frontend.service" "pulseaudio.socket"
"pulseaudio.service" "wm-exit.service" "irexec.service")
disabled_services=()
# enable configured services for the user session
for service in "${enabled_services[@]}"; do
systemctl --user enable "$service"
done
# disable unwanted services for the user session
for service in "${disabled_services[@]}"; do
systemctl --user disable "$service"
done
if which dbus-update-activation-environment >/dev/null 2>&1; then
dbus-update-activation-environment DISPLAY XAUTHORITY XDG_RUNTIME_DIR
fi
# start systemd units for the yavdr user session
systemctl --user isolate yavdr-desktop.target
udiskie &rc.xml
<?xml version="1.0" encoding="UTF-8"?>
<openbox_config xmlns="http://openbox.org/3.4/rc" xmlns:xi="http://www.w3.org/2001/XInclude">
<!-- Do not edit this file, it will be overwritten on install.
Copy the file to $HOME/.config/openbox/ instead. -->
<resistance>
<strength>10</strength>
<screen_edge_strength>20</screen_edge_strength>
</resistance>
<focus>
<focusNew>yes</focusNew>
<!-- always try to focus new windows when they appear. other rules do
apply -->
<followMouse>no</followMouse>
<!-- move focus to a window when you move the mouse into it -->
<focusLast>yes</focusLast>
<!-- focus the last used window when changing desktops, instead of the one
under the mouse pointer. when followMouse is enabled -->
<underMouse>no</underMouse>
<!-- move focus under the mouse, even when the mouse is not moving -->
<focusDelay>200</focusDelay>
<!-- when followMouse is enabled, the mouse must be inside the window for
this many milliseconds (1000 = 1 sec) before moving focus to it -->
<raiseOnFocus>no</raiseOnFocus>
<!-- when followMouse is enabled, and a window is given focus by moving the
mouse into it, also raise the window -->
</focus>
<placement>
<policy>Smart</policy>
<!-- 'Smart' or 'UnderMouse' -->
<center>yes</center>
<!-- whether to place windows in the center of the free area found or
the top left corner -->
<monitor>Active</monitor>
<!-- with Smart placement on a multi-monitor system, try to place new windows
on: 'Any' - any monitor, 'Mouse' - where the mouse is, 'Active' - where
the active window is, 'Primary' - only on the primary monitor -->
<primaryMonitor>Active</primaryMonitor>
<!-- The monitor where Openbox should place popup dialogs such as the
focus cycling popup, or the desktop switch popup. It can be an index
from 1, specifying a particular monitor. Or it can be one of the
following: 'Mouse' - where the mouse is, or
'Active' - where the active window is -->
</placement>
<theme>
<name>Onyx</name>
<titleLayout>NLIMC</titleLayout>
<!--
available characters are NDSLIMC, each can occur at most once.
N: window icon
L: window label (AKA title).
I: iconify
M: maximize
C: close
S: shade (roll up/down)
D: omnipresent (on all desktops).
-->
<keepBorder>no</keepBorder>
<animateIconify>yes</animateIconify>
<font place="ActiveWindow">
<name>sans</name>
<size>8</size>
<!-- font size in points -->
<weight>bold</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="InactiveWindow">
<name>sans</name>
<size>8</size>
<!-- font size in points -->
<weight>bold</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="MenuHeader">
<name>sans</name>
<size>9</size>
<!-- font size in points -->
<weight>normal</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="MenuItem">
<name>sans</name>
<size>9</size>
<!-- font size in points -->
<weight>normal</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="ActiveOnScreenDisplay">
<name>sans</name>
<size>9</size>
<!-- font size in points -->
<weight>bold</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="InactiveOnScreenDisplay">
<name>sans</name>
<size>9</size>
<!-- font size in points -->
<weight>bold</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
</theme>
<desktops>
<!-- this stuff is only used at startup, pagers allow you to change them
during a session
these are default values to use when other ones are not already set
by other applications, or saved in your session
use obconf if you want to change these without having to log out
and back in -->
<number>2</number>
<firstdesk>1</firstdesk>
<names>
<!-- set names up here if you want to, like this:
<name>desktop 1</name>
<name>desktop 2</name>
-->
</names>
<popupTime>875</popupTime>
<!-- The number of milliseconds to show the popup for when switching
desktops. Set this to 0 to disable the popup. -->
</desktops>
<resize>
<drawContents>yes</drawContents>
<popupShow>Nonpixel</popupShow>
<!-- 'Always', 'Never', or 'Nonpixel' (xterms and such) -->
<popupPosition>Center</popupPosition>
<!-- 'Center', 'Top', or 'Fixed' -->
<popupFixedPosition>
<!-- these are used if popupPosition is set to 'Fixed' -->
<x>10</x>
<!-- positive number for distance from left edge, negative number for
distance from right edge, or 'Center' -->
<y>10</y>
<!-- positive number for distance from top edge, negative number for
distance from bottom edge, or 'Center' -->
</popupFixedPosition>
</resize>
<!-- You can reserve a portion of your screen where windows will not cover when
they are maximized, or when they are initially placed.
Many programs reserve space automatically, but you can use this in other
cases. -->
<margins>
<top>0</top>
<bottom>0</bottom>
<left>0</left>
<right>0</right>
</margins>
<dock>
<position>TopLeft</position>
<!-- (Top|Bottom)(Left|Right|)|Top|Bottom|Left|Right|Floating -->
<floatingX>0</floatingX>
<floatingY>0</floatingY>
<noStrut>no</noStrut>
<stacking>Above</stacking>
<!-- 'Above', 'Normal', or 'Below' -->
<direction>Vertical</direction>
<!-- 'Vertical' or 'Horizontal' -->
<autoHide>no</autoHide>
<hideDelay>300</hideDelay>
<!-- in milliseconds (1000 = 1 second) -->
<showDelay>300</showDelay>
<!-- in milliseconds (1000 = 1 second) -->
<moveButton>Middle</moveButton>
<!-- 'Left', 'Middle', 'Right' -->
</dock>
<keyboard>
<chainQuitKey>C-g</chainQuitKey>
<!-- Keybindings for yavdr-frontend -->
<keybind key="W-a">
<action name="Execute">
<command>frontend-dbus-send start</command>
</action>
</keybind>
<keybind key="W-s">
<action name="Execute">
<command>frontend-dbus-send stop</command>
</action>
</keybind>
<keybind key="W-x">
<action name="Execute">
<command>frontend-dbus-send switchbetween kodi vdr</command>
</action>
</keybind>
<keybind key="XF86HomePage">
<action name="Execute">
<command>frontend-dbus-send toggle</command>
</action>
</keybind>
<!-- Keybindings for desktop switching -->
<keybind key="C-A-Left">
<action name="GoToDesktop">
<to>left</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Right">
<action name="GoToDesktop">
<to>right</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Up">
<action name="GoToDesktop">
<to>up</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Down">
<action name="GoToDesktop">
<to>down</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Left">
<action name="SendToDesktop">
<to>left</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Right">
<action name="SendToDesktop">
<to>right</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Up">
<action name="SendToDesktop">
<to>up</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Down">
<action name="SendToDesktop">
<to>down</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="W-F1">
<action name="GoToDesktop">
<to>1</to>
</action>
</keybind>
<keybind key="W-F2">
<action name="GoToDesktop">
<to>2</to>
</action>
</keybind>
<keybind key="W-F3">
<action name="GoToDesktop">
<to>3</to>
</action>
</keybind>
<keybind key="W-F4">
<action name="GoToDesktop">
<to>4</to>
</action>
</keybind>
<keybind key="W-d">
<action name="ToggleShowDesktop"/>
</keybind>
<!-- Keybindings for windows -->
<keybind key="A-F4">
<action name="Close"/>
</keybind>
<keybind key="A-Escape">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</keybind>
<keybind key="A-space">
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</keybind>
<!-- Take a screenshot of the current window with scrot when Alt+Print are pressed -->
<keybind key="A-Print">
<action name="Execute">
<command>scrot -s</command>
</action>
</keybind>
<!-- Keybindings for window switching -->
<keybind key="A-Tab">
<action name="NextWindow">
<finalactions>
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</finalactions>
</action>
</keybind>
<keybind key="A-S-Tab">
<action name="PreviousWindow">
<finalactions>
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</finalactions>
</action>
</keybind>
<keybind key="C-A-Tab">
<action name="NextWindow">
<panels>yes</panels>
<desktop>yes</desktop>
<finalactions>
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</finalactions>
</action>
</keybind>
<!-- Keybindings for window switching with the arrow keys -->
<keybind key="W-S-Right">
<action name="DirectionalCycleWindows">
<direction>right</direction>
</action>
</keybind>
<keybind key="W-S-Left">
<action name="DirectionalCycleWindows">
<direction>left</direction>
</action>
</keybind>
<keybind key="W-S-Up">
<action name="DirectionalCycleWindows">
<direction>up</direction>
</action>
</keybind>
<keybind key="W-S-Down">
<action name="DirectionalCycleWindows">
<direction>down</direction>
</action>
</keybind>
</keyboard>
<mouse>
<dragThreshold>1</dragThreshold>
<!-- number of pixels the mouse must move before a drag begins -->
<doubleClickTime>500</doubleClickTime>
<!-- in milliseconds (1000 = 1 second) -->
<screenEdgeWarpTime>400</screenEdgeWarpTime>
<!-- Time before changing desktops when the pointer touches the edge of the
screen while moving a window, in milliseconds (1000 = 1 second).
Set this to 0 to disable warping -->
<screenEdgeWarpMouse>false</screenEdgeWarpMouse>
<!-- Set this to TRUE to move the mouse pointer across the desktop when
switching due to hitting the edge of the screen -->
<context name="Frame">
<mousebind button="A-Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="A-Left" action="Click">
<action name="Unshade"/>
</mousebind>
<mousebind button="A-Left" action="Drag">
<action name="Move"/>
</mousebind>
<mousebind button="A-Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="A-Right" action="Drag">
<action name="Resize"/>
</mousebind>
<mousebind button="A-Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="C-A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="C-A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="A-S-Up" action="Click">
<action name="SendToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="A-S-Down" action="Click">
<action name="SendToDesktop">
<to>next</to>
</action>
</mousebind>
</context>
<context name="Titlebar">
<mousebind button="Left" action="Drag">
<action name="Move"/>
</mousebind>
<mousebind button="Left" action="DoubleClick">
<action name="ToggleMaximize"/>
</mousebind>
<mousebind button="Up" action="Click">
<action name="if">
<shaded>no</shaded>
<then>
<action name="Shade"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
<action name="Lower"/>
</then>
</action>
</mousebind>
<mousebind button="Down" action="Click">
<action name="if">
<shaded>yes</shaded>
<then>
<action name="Unshade"/>
<action name="Raise"/>
</then>
</action>
</mousebind>
</context>
<context name="Titlebar Top Right Bottom Left TLCorner TRCorner BRCorner BLCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="Top">
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>top</edge>
</action>
</mousebind>
</context>
<context name="Left">
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>left</edge>
</action>
</mousebind>
</context>
<context name="Right">
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>right</edge>
</action>
</mousebind>
</context>
<context name="Bottom">
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>bottom</edge>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="TRCorner BRCorner TLCorner BLCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="Client">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
</context>
<context name="Icon">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="AllDesktops">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleOmnipresent"/>
</mousebind>
</context>
<context name="Shade">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleShade"/>
</mousebind>
</context>
<context name="Iconify">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="Iconify"/>
</mousebind>
</context>
<context name="Maximize">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleMaximize"/>
</mousebind>
<mousebind button="Middle" action="Click">
<action name="ToggleMaximize">
<direction>vertical</direction>
</action>
</mousebind>
<mousebind button="Right" action="Click">
<action name="ToggleMaximize">
<direction>horizontal</direction>
</action>
</mousebind>
</context>
<context name="Close">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="Close"/>
</mousebind>
</context>
<context name="Desktop">
<mousebind button="Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="C-A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="C-A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
</context>
<context name="Root">
<!-- Menus -->
<mousebind button="Middle" action="Press">
<action name="ShowMenu">
<menu>client-list-combined-menu</menu>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="ShowMenu">
<menu>root-menu</menu>
</action>
</mousebind>
</context>
<context name="MoveResize">
<mousebind button="Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
</context>
</mouse>
<menu>
<!-- You can specify more than one menu file in here and they are all loaded,
just don't make menu ids clash or, well, it'll be kind of pointless -->
<!-- default menu file (or custom one in $HOME/.config/openbox/) -->
<!-- system menu files on Debian systems -->
<file>/var/lib/openbox/debian-menu.xml</file>
<file>menu.xml</file>
<hideDelay>200</hideDelay>
<!-- if a press-release lasts longer than this setting (in milliseconds), the
menu is hidden again -->
<middle>no</middle>
<!-- center submenus vertically about the parent entry -->
<submenuShowDelay>100</submenuShowDelay>
<!-- time to delay before showing a submenu after hovering over the parent
entry.
if this is a negative value, then the delay is infinite and the
submenu will not be shown until it is clicked on -->
<submenuHideDelay>400</submenuHideDelay>
<!-- time to delay before hiding a submenu when selecting another
entry in parent menu
if this is a negative value, then the delay is infinite and the
submenu will not be hidden until a different submenu is opened -->
<showIcons>yes</showIcons>
<!-- controls if icons appear in the client-list-(combined-)menu -->
<manageDesktops>yes</manageDesktops>
<!-- show the manage desktops section in the client-list-(combined-)menu -->
</menu>
<!--
# this is an example with comments through out. use these to make your
# own rules, but without the comments of course.
# you may use one or more of the name/class/role/title/type rules to specify
# windows to match
<application name="the window's _OB_APP_NAME property (see obxprop)"
class="the window's _OB_APP_CLASS property (see obxprop)"
groupname="the window's _OB_APP_GROUP_NAME property (see obxprop)"
groupclass="the window's _OB_APP_GROUP_CLASS property (see obxprop)"
role="the window's _OB_APP_ROLE property (see obxprop)"
title="the window's _OB_APP_TITLE property (see obxprop)"
type="the window's _OB_APP_TYPE property (see obxprob)..
(if unspecified, then it is 'dialog' for child windows)">
# you may set only one of name/class/role/title/type, or you may use more
# than one together to restrict your matches.
# the name, class, role, and title use simple wildcard matching such as those
# used by a shell. you can use * to match any characters and ? to match
# any single character.
# the type is one of: normal, dialog, splash, utility, menu, toolbar, dock,
# or desktop
# when multiple rules match a window, they will all be applied, in the
# order that they appear in this list
# each rule element can be left out or set to 'default' to specify to not
# change that attribute of the window
<decor>yes</decor>
# enable or disable window decorations
<shade>no</shade>
# make the window shaded when it appears, or not
<position force="no">
# the position is only used if both an x and y coordinate are provided
# (and not set to 'default')
# when force is "yes", then the window will be placed here even if it
# says you want it placed elsewhere. this is to override buggy
# applications who refuse to behave
<x>center</x>
# a number like 50, or 'center' to center on screen. use a negative number
# to start from the right (or bottom for <y>), ie -50 is 50 pixels from
# the right edge (or bottom). use 'default' to specify using value
# provided by the application, or chosen by openbox, instead.
<y>200</y>
<monitor>1</monitor>
# specifies the monitor in a xinerama setup.
# 1 is the first head, or 'mouse' for wherever the mouse is
</position>
<size>
# the size to make the window.
<width>20</width>
# a number like 20, or 'default' to use the size given by the application.
# you can use fractions such as 1/2 or percentages such as 75% in which
# case the value is relative to the size of the monitor that the window
# appears on.
<height>30%</height>
</size>
<focus>yes</focus>
# if the window should try be given focus when it appears. if this is set
# to yes it doesn't guarantee the window will be given focus. some
# restrictions may apply, but Openbox will try to
<desktop>1</desktop>
# 1 is the first desktop, 'all' for all desktops
<layer>normal</layer>
# 'above', 'normal', or 'below'
<iconic>no</iconic>
# make the window iconified when it appears, or not
<skip_pager>no</skip_pager>
# asks to not be shown in pagers
<skip_taskbar>no</skip_taskbar>
# asks to not be shown in taskbars. window cycling actions will also
# skip past such windows
<fullscreen>yes</fullscreen>
# make the window in fullscreen mode when it appears
<maximized>true</maximized>
# 'Horizontal', 'Vertical' or boolean (yes/no)
</application>
# end of the example
-->
<applications>
<application title="softhddevice">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application title="softhdcuvid">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application title="vaapidevice">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application class="VDR">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application title="browser">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application title="osd2Web">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
</applications>
</openbox_config>rc2.xml
<?xml version="1.0" encoding="UTF-8"?>
<openbox_config xmlns="http://openbox.org/3.4/rc" xmlns:xi="http://www.w3.org/2001/XInclude">
<!-- Do not edit this file, it will be overwritten on install.
Copy the file to $HOME/.config/openbox/ instead. -->
<resistance>
<strength>10</strength>
<screen_edge_strength>20</screen_edge_strength>
</resistance>
<focus>
<focusNew>no</focusNew>
<!-- always try to focus new windows when they appear. other rules do
apply -->
<followMouse>no</followMouse>
<!-- move focus to a window when you move the mouse into it -->
<focusLast>yes</focusLast>
<!-- focus the last used window when changing desktops, instead of the one
under the mouse pointer. when followMouse is enabled -->
<underMouse>no</underMouse>
<!-- move focus under the mouse, even when the mouse is not moving -->
<focusDelay>200</focusDelay>
<!-- when followMouse is enabled, the mouse must be inside the window for
this many milliseconds (1000 = 1 sec) before moving focus to it -->
<raiseOnFocus>no</raiseOnFocus>
<!-- when followMouse is enabled, and a window is given focus by moving the
mouse into it, also raise the window -->
</focus>
<placement>
<policy>Smart</policy>
<!-- 'Smart' or 'UnderMouse' -->
<center>yes</center>
<!-- whether to place windows in the center of the free area found or
the top left corner -->
<monitor>Active</monitor>
<!-- with Smart placement on a multi-monitor system, try to place new windows
on: 'Any' - any monitor, 'Mouse' - where the mouse is, 'Active' - where
the active window is, 'Primary' - only on the primary monitor -->
<primaryMonitor>Active</primaryMonitor>
<!-- The monitor where Openbox should place popup dialogs such as the
focus cycling popup, or the desktop switch popup. It can be an index
from 1, specifying a particular monitor. Or it can be one of the
following: 'Mouse' - where the mouse is, or
'Active' - where the active window is -->
</placement>
<theme>
<name>Onyx</name>
<titleLayout>NLIMC</titleLayout>
<!--
available characters are NDSLIMC, each can occur at most once.
N: window icon
L: window label (AKA title).
I: iconify
M: maximize
C: close
S: shade (roll up/down)
D: omnipresent (on all desktops).
-->
<keepBorder>no</keepBorder>
<animateIconify>yes</animateIconify>
<font place="ActiveWindow">
<name>sans</name>
<size>8</size>
<!-- font size in points -->
<weight>bold</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="InactiveWindow">
<name>sans</name>
<size>8</size>
<!-- font size in points -->
<weight>bold</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="MenuHeader">
<name>sans</name>
<size>9</size>
<!-- font size in points -->
<weight>normal</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="MenuItem">
<name>sans</name>
<size>9</size>
<!-- font size in points -->
<weight>normal</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="ActiveOnScreenDisplay">
<name>sans</name>
<size>9</size>
<!-- font size in points -->
<weight>bold</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="InactiveOnScreenDisplay">
<name>sans</name>
<size>9</size>
<!-- font size in points -->
<weight>bold</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
</theme>
<desktops>
<!-- this stuff is only used at startup, pagers allow you to change them
during a session
these are default values to use when other ones are not already set
by other applications, or saved in your session
use obconf if you want to change these without having to log out
and back in -->
<number>2</number>
<firstdesk>1</firstdesk>
<names>
<!-- set names up here if you want to, like this:
<name>desktop 1</name>
<name>desktop 2</name>
-->
</names>
<popupTime>875</popupTime>
<!-- The number of milliseconds to show the popup for when switching
desktops. Set this to 0 to disable the popup. -->
</desktops>
<resize>
<drawContents>yes</drawContents>
<popupShow>Nonpixel</popupShow>
<!-- 'Always', 'Never', or 'Nonpixel' (xterms and such) -->
<popupPosition>Center</popupPosition>
<!-- 'Center', 'Top', or 'Fixed' -->
<popupFixedPosition>
<!-- these are used if popupPosition is set to 'Fixed' -->
<x>10</x>
<!-- positive number for distance from left edge, negative number for
distance from right edge, or 'Center' -->
<y>10</y>
<!-- positive number for distance from top edge, negative number for
distance from bottom edge, or 'Center' -->
</popupFixedPosition>
</resize>
<!-- You can reserve a portion of your screen where windows will not cover when
they are maximized, or when they are initially placed.
Many programs reserve space automatically, but you can use this in other
cases. -->
<margins>
<top>0</top>
<bottom>0</bottom>
<left>0</left>
<right>0</right>
</margins>
<dock>
<position>TopLeft</position>
<!-- (Top|Bottom)(Left|Right|)|Top|Bottom|Left|Right|Floating -->
<floatingX>0</floatingX>
<floatingY>0</floatingY>
<noStrut>no</noStrut>
<stacking>Above</stacking>
<!-- 'Above', 'Normal', or 'Below' -->
<direction>Vertical</direction>
<!-- 'Vertical' or 'Horizontal' -->
<autoHide>no</autoHide>
<hideDelay>300</hideDelay>
<!-- in milliseconds (1000 = 1 second) -->
<showDelay>300</showDelay>
<!-- in milliseconds (1000 = 1 second) -->
<moveButton>Middle</moveButton>
<!-- 'Left', 'Middle', 'Right' -->
</dock>
<keyboard>
<chainQuitKey>C-g</chainQuitKey>
<!-- Keybindings for desktop switching -->
<keybind key="C-A-Left">
<action name="GoToDesktop">
<to>left</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Right">
<action name="GoToDesktop">
<to>right</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Up">
<action name="GoToDesktop">
<to>up</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Down">
<action name="GoToDesktop">
<to>down</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Left">
<action name="SendToDesktop">
<to>left</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Right">
<action name="SendToDesktop">
<to>right</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Up">
<action name="SendToDesktop">
<to>up</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Down">
<action name="SendToDesktop">
<to>down</to>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="W-F1">
<action name="GoToDesktop">
<to>1</to>
</action>
</keybind>
<keybind key="W-F2">
<action name="GoToDesktop">
<to>2</to>
</action>
</keybind>
<keybind key="W-F3">
<action name="GoToDesktop">
<to>3</to>
</action>
</keybind>
<keybind key="W-F4">
<action name="GoToDesktop">
<to>4</to>
</action>
</keybind>
<keybind key="W-d">
<action name="ToggleShowDesktop"/>
</keybind>
<!-- Keybindings for windows -->
<keybind key="A-F4">
<action name="Close"/>
</keybind>
<keybind key="A-Escape">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</keybind>
<keybind key="A-space">
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</keybind>
<!-- Take a screenshot of the current window with scrot when Alt+Print are pressed -->
<keybind key="A-Print">
<action name="Execute">
<command>scrot -s</command>
</action>
</keybind>
<!-- Keybindings for window switching -->
<keybind key="A-Tab">
<action name="NextWindow">
<finalactions>
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</finalactions>
</action>
</keybind>
<keybind key="A-S-Tab">
<action name="PreviousWindow">
<finalactions>
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</finalactions>
</action>
</keybind>
<keybind key="C-A-Tab">
<action name="NextWindow">
<panels>yes</panels>
<desktop>yes</desktop>
<finalactions>
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</finalactions>
</action>
</keybind>
<!-- Keybindings for window switching with the arrow keys -->
<keybind key="W-S-Right">
<action name="DirectionalCycleWindows">
<direction>right</direction>
</action>
</keybind>
<keybind key="W-S-Left">
<action name="DirectionalCycleWindows">
<direction>left</direction>
</action>
</keybind>
<keybind key="W-S-Up">
<action name="DirectionalCycleWindows">
<direction>up</direction>
</action>
</keybind>
<keybind key="W-S-Down">
<action name="DirectionalCycleWindows">
<direction>down</direction>
</action>
</keybind>
</keyboard>
<mouse>
<dragThreshold>1</dragThreshold>
<!-- number of pixels the mouse must move before a drag begins -->
<doubleClickTime>500</doubleClickTime>
<!-- in milliseconds (1000 = 1 second) -->
<screenEdgeWarpTime>400</screenEdgeWarpTime>
<!-- Time before changing desktops when the pointer touches the edge of the
screen while moving a window, in milliseconds (1000 = 1 second).
Set this to 0 to disable warping -->
<screenEdgeWarpMouse>false</screenEdgeWarpMouse>
<!-- Set this to TRUE to move the mouse pointer across the desktop when
switching due to hitting the edge of the screen -->
<context name="Frame">
<mousebind button="A-Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="A-Left" action="Click">
<action name="Unshade"/>
</mousebind>
<mousebind button="A-Left" action="Drag">
<action name="Move"/>
</mousebind>
<mousebind button="A-Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="A-Right" action="Drag">
<action name="Resize"/>
</mousebind>
<mousebind button="A-Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="C-A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="C-A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="A-S-Up" action="Click">
<action name="SendToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="A-S-Down" action="Click">
<action name="SendToDesktop">
<to>next</to>
</action>
</mousebind>
</context>
<context name="Titlebar">
<mousebind button="Left" action="Drag">
<action name="Move"/>
</mousebind>
<mousebind button="Left" action="DoubleClick">
<action name="ToggleMaximize"/>
</mousebind>
<mousebind button="Up" action="Click">
<action name="if">
<shaded>no</shaded>
<then>
<action name="Shade"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
<action name="Lower"/>
</then>
</action>
</mousebind>
<mousebind button="Down" action="Click">
<action name="if">
<shaded>yes</shaded>
<then>
<action name="Unshade"/>
<action name="Raise"/>
</then>
</action>
</mousebind>
</context>
<context name="Titlebar Top Right Bottom Left TLCorner TRCorner BRCorner BLCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="Top">
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>top</edge>
</action>
</mousebind>
</context>
<context name="Left">
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>left</edge>
</action>
</mousebind>
</context>
<context name="Right">
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>right</edge>
</action>
</mousebind>
</context>
<context name="Bottom">
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>bottom</edge>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="TRCorner BRCorner TLCorner BLCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="Client">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
</context>
<context name="Icon">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="AllDesktops">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleOmnipresent"/>
</mousebind>
</context>
<context name="Shade">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleShade"/>
</mousebind>
</context>
<context name="Iconify">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="Iconify"/>
</mousebind>
</context>
<context name="Maximize">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleMaximize"/>
</mousebind>
<mousebind button="Middle" action="Click">
<action name="ToggleMaximize">
<direction>vertical</direction>
</action>
</mousebind>
<mousebind button="Right" action="Click">
<action name="ToggleMaximize">
<direction>horizontal</direction>
</action>
</mousebind>
</context>
<context name="Close">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="Close"/>
</mousebind>
</context>
<context name="Desktop">
<mousebind button="Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="C-A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="C-A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
</context>
<context name="Root">
<!-- Menus -->
<mousebind button="Middle" action="Press">
<action name="ShowMenu">
<menu>client-list-combined-menu</menu>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="ShowMenu">
<menu>root-menu</menu>
</action>
</mousebind>
</context>
<context name="MoveResize">
<mousebind button="Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="GoToDesktop">
<to>previous</to>
</action>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="GoToDesktop">
<to>next</to>
</action>
</mousebind>
</context>
</mouse>
<menu>
<!-- You can specify more than one menu file in here and they are all loaded,
just don't make menu ids clash or, well, it'll be kind of pointless -->
<!-- default menu file (or custom one in $HOME/.config/openbox/) -->
<!-- system menu files on Debian systems -->
<file>/var/lib/openbox/debian-menu.xml</file>
<file>menu.xml</file>
<hideDelay>200</hideDelay>
<!-- if a press-release lasts longer than this setting (in milliseconds), the
menu is hidden again -->
<middle>no</middle>
<!-- center submenus vertically about the parent entry -->
<submenuShowDelay>100</submenuShowDelay>
<!-- time to delay before showing a submenu after hovering over the parent
entry.
if this is a negative value, then the delay is infinite and the
submenu will not be shown until it is clicked on -->
<submenuHideDelay>400</submenuHideDelay>
<!-- time to delay before hiding a submenu when selecting another
entry in parent menu
if this is a negative value, then the delay is infinite and the
submenu will not be hidden until a different submenu is opened -->
<showIcons>yes</showIcons>
<!-- controls if icons appear in the client-list-(combined-)menu -->
<manageDesktops>yes</manageDesktops>
<!-- show the manage desktops section in the client-list-(combined-)menu -->
</menu>
<!--
# this is an example with comments through out. use these to make your
# own rules, but without the comments of course.
# you may use one or more of the name/class/role/title/type rules to specify
# windows to match
<application name="the window's _OB_APP_NAME property (see obxprop)"
class="the window's _OB_APP_CLASS property (see obxprop)"
groupname="the window's _OB_APP_GROUP_NAME property (see obxprop)"
groupclass="the window's _OB_APP_GROUP_CLASS property (see obxprop)"
role="the window's _OB_APP_ROLE property (see obxprop)"
title="the window's _OB_APP_TITLE property (see obxprop)"
type="the window's _OB_APP_TYPE property (see obxprob)..
(if unspecified, then it is 'dialog' for child windows)">
# you may set only one of name/class/role/title/type, or you may use more
# than one together to restrict your matches.
# the name, class, role, and title use simple wildcard matching such as those
# used by a shell. you can use * to match any characters and ? to match
# any single character.
# the type is one of: normal, dialog, splash, utility, menu, toolbar, dock,
# or desktop
# when multiple rules match a window, they will all be applied, in the
# order that they appear in this list
# each rule element can be left out or set to 'default' to specify to not
# change that attribute of the window
<decor>yes</decor>
# enable or disable window decorations
<shade>no</shade>
# make the window shaded when it appears, or not
<position force="no">
# the position is only used if both an x and y coordinate are provided
# (and not set to 'default')
# when force is "yes", then the window will be placed here even if it
# says you want it placed elsewhere. this is to override buggy
# applications who refuse to behave
<x>center</x>
# a number like 50, or 'center' to center on screen. use a negative number
# to start from the right (or bottom for <y>), ie -50 is 50 pixels from
# the right edge (or bottom). use 'default' to specify using value
# provided by the application, or chosen by openbox, instead.
<y>200</y>
<monitor>1</monitor>
# specifies the monitor in a xinerama setup.
# 1 is the first head, or 'mouse' for wherever the mouse is
</position>
<size>
# the size to make the window.
<width>20</width>
# a number like 20, or 'default' to use the size given by the application.
# you can use fractions such as 1/2 or percentages such as 75% in which
# case the value is relative to the size of the monitor that the window
# appears on.
<height>30%</height>
</size>
<focus>yes</focus>
# if the window should try be given focus when it appears. if this is set
# to yes it doesn't guarantee the window will be given focus. some
# restrictions may apply, but Openbox will try to
<desktop>1</desktop>
# 1 is the first desktop, 'all' for all desktops
<layer>normal</layer>
# 'above', 'normal', or 'below'
<iconic>no</iconic>
# make the window iconified when it appears, or not
<skip_pager>no</skip_pager>
# asks to not be shown in pagers
<skip_taskbar>no</skip_taskbar>
# asks to not be shown in taskbars. window cycling actions will also
# skip past such windows
<fullscreen>yes</fullscreen>
# make the window in fullscreen mode when it appears
<maximized>true</maximized>
# 'Horizontal', 'Vertical' or boolean (yes/no)
</application>
# end of the example
-->
<applications>
<application title="softhddevice">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application title="softhdcuvid">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application title="vaapidevice">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application class="VDR">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application title="browser">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
<application title="osd2Web">
<decor>no</decor>
<maximized>yes</maximized>
<!--<skip_pager>yes</skip_pager>-->
<skip_taskbar>no</skip_taskbar>
</application>
</applications>
</openbox_config>udiskie
config.yml
{{ ansible_managed | comment }}
program_options:
tray: false # [bool] Enable the tray icon. "auto"
menu: flat # ["flat" | "nested"] Set the
automount: true # [bool] Enable automatic mounting.
notify: true # [bool] Enable notifications.
password_cache: false # [int] Password cache in minutes. Caching is
file_manager: ""
notify_command: "{{ vdr.home }}/bin/udiskie_vdr_mount_helper '{event}' '{device_presentation}' '{mount_path}'"
device_config:
- is_loop: true
ignore: true
- is_external: false
ignore: true
notifications:
device_mounted: 5 # mount notification
device_unmounted: true # unmount notification
device_added: true # device has appeared
device_removed: true # device has disappearedmount helper script
{{ ansible_managed | comment }}
videodir="{{ vdr.recdir }}"
event="$1"
device_node="$2"
mount_path="$3"
logger -t "mount-notification" "event: $event, device: $device_node, mount_path: $mount_path"
case "$event" in
'device_mounted')
target="${videodir}/$(basename "${mount_path}")"
ln -s -T "$mount_path" "$target" ||
{ logger -t "vdr recordings found" "mountpoint already exists, aborting"; exit; }
# check if we got a vdr recording on the mountpoint
if [ -n $(find "$mount_path" -name "*.rec" -print -quit 2>/dev/null) ]
then
vdr-dbus-send /Skin skin.QueueMessage string:"$mount_path mounted (with recordings)"
svdrpsend updr
else
vdr-dbus-send /Skin skin.QueueMessage string:"$mount_path' mounted"
fi
;;
'device_unmounted')
removed_symlinks=($(find "$videodir" -xtype l -delete -print))
logger -t "device umounted" "remove unneeded symlinks: $(paste -d " " <<< "${removed_symlinks[@]}")"
vdr-dbus-send /Skin skin.QueueMessage string:"$device_node umounted"
svdrpsend updr
;;
'device_removed')
removed_symlinks=($(find "$videodir" -xtype l -delete -print))
if [ -z "$device_node" ] && exit
logger -t "device removed" "remove unneeded symlinks: $(paste -d " " <<< "${removed_symlinks[@]}")"
vdr-dbus-send /Skin skin.QueueMessage string:"$device_node removed"
svdrpsend updr
;;
'job_failed')
if [ -n "$mount_path" ]
then
logger -t "umount failed" "could not unmount $mount_path"
else
logger -t "operation failed" 'could not mount(?) '"$device_node"
fi
;;
esacudiskie snippet for commands.conf
{{ ansible_managed | comment }}
{{ "Safely remove usb mass storage" | translate }} : echo 'svdrpsend mesg "$(udiskie-umount -a 2>&1 | grep -o "Error unmounting.*")"' | at nowSystemd User Session
yavdr-desktop.target
[Unit]
Description=yaVDR Desktop
Requires=default.target
After=default.target pulseaudio.service
Wants=dbus.service pulseaudio.service
AllowIsolate=yesdetect-second-display
#!/bin/bash
source <(systemctl --user show-environment)
SECOND_DISPLAY="${DISPLAY%\.[0-9]*}.1"
if xrandr -d "$SECOND_DISPLAY" -q | grep -q "connected"; then
[ "$DISPLAY" != "$SECOND_DISPLAY" ] && d="DISPLAY=$SECOND_DISPLAY" || d="DISPLAY=$DISPLAY"
echo "$d" > ~/.second_display;
else
rm -f ~/.second_display
fi[Unit]
Description=Detect second DISPLAY using xrandr
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=%h/bin/detect-second-display
[Install]
WantedBy=yavdr-desktop.targetswitch-displays
This script exchanges the primary and secondary screen. It needs access to the systemd user session.
#!/bin/bash
source <(systemctl --user show-environment)
[[ "$DISPLAY" =~ \.1$ ]] && DISPLAY="${DISPLAY%.1}.0" || DISPLAY="${DISPLAY%.0}.1"
frontend-dbus-send stop
systemctl --user stop osd2web
frontend-dbus-send setDisplay "$DISPLAY"
systemctl --user start osd2web
frontend-dbus-send startopenbox-second.service
[Unit]
Description=Start openbox on the second DISPLAY if it exists
After=detect-second-display.service
Wants=detect-second-display.service
Before=yavdr-frontend.service
ConditionFileNotEmpty=%h/.second_display
[Service]
EnvironmentFile=%h/.second_display
ExecStart=/usr/bin/openbox --config-file %h/.config/openbox/rc2.xml
ExecStartPost=/usr/bin/xset -dpms s off -display $DISPLAY
ExecStartPost=/bin/bash %h/.fehbg
[Install]
WantedBy=yavdr-desktop.targetosd2web.service
[Unit]
Description=Start a kiosk browser on the second DISPLAY if it exists
After=detect-second-display.service openbox-second.service
Wants=detect-second-display.service openbox-second.service
ConditionFileNotEmpty=%h/.second_display
[Service]
EnvironmentFile=%h/.second_display
Environment=url="http://localhost:4444/skins/horchiTft/index.html?theme=anthraize&onlyView=1"
Environment=browser="kiosk-browser"
EnvironmentFile=-%h/.config/osd2web/config
ExecStart=/usr/bin/on_vdr -o -c '${browser} "${url}"'
KillSignal=SIGINT
[Install]
WantedBy=yavdr-desktop.targettmux.service
[Unit]
Description=Start tmux in detached session
[Service]
EnvironmentFile=-%h/.session-env
Type=forking
ExecStart=/usr/bin/tmux new-session -s use-session -d
ExecStop=/usr/bin/tmux kill-session -t %u
Restart=always
[Install]
WantedBy=default.targetwm-exit.service
[Unit]
Description=exit window manager gracefully
[Service]
ExecStart=/bin/true
ExecStop=/usr/bin/openbox --exit
RemainAfterExit=True
[Install]
WantedBy=default.targetirexec
irexec.service starts irexec for the user session
[Unit]
Description=LIRC command handler
[Service]
Type=simple
ExecStart=/usr/bin/irexec %h/.lircrc
[Install]
WantedBy=yavdr-desktop.target~/.lircrc contains the irexec configuration
begin
prog = irexec
button = KEY_HOME
config = frontend-dbus-send switchbetween kodi vdr
endsamba-install
tasks
---
# file: roles/samba-install/tasks/main.yml
- name: install samba server
apt:
name:
- samba
- samba-common
- samba-common-bin
- tdb-tools
state: present
install_recommends: nosamba-config
tasks
---
# file: roles/samba-config/tasks/main.yml
# TODO:
# - name: divert original smbd.conf
- name: touch smb.conf.custom
file:
state: touch
dest: '/etc/samba/smb.conf.custom'
notify: [ 'Restart Samba' ]
- name: expand template for smb.conf
template:
src: 'templates/smb.conf.j2'
dest: '/etc/samba/smb.conf'
#validate: 'testparm -s %s'
notify: [ 'Restart Samba' ]templates
smb.conf
global settings
{{ ansible_managed | comment }}
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = {{ samba.workgroup }}
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
# security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad password
guest account = nobody
{% if samba.windows_compatible %}
# disable unix extensions and enable following symlinks
unix extensions = no
follow symlinks= yes
wide links= yes
{% endif %}media directories
{% for name, path in media_dirs.items() | list %}
[{{ name }}]
path = {{ path }}
comment = {{ name }} on %h
guest ok = yes
writeable = yes
browseable = yes
create mode = 0664
directory mode = 0775
force user = {{ vdr.user }}
force group = {{ vdr.group }}
follow symlinks = yes
wide links = yes
{% endfor %}include custom samba exports
include = /etc/samba/smb.conf.customSTARTED autoinstall-drivers
It would be nice to be able to detect if it is suitable to install those drivers:
TODO sundtek for Sundtek devices (local or network connection)
For now we have the role install-sundtek, in the future we could do a little better:
We should be able to detect local devices by USB-ID:
Vendor-IDs:
- eb1a:5[1b2] (alte Generation)
- 2659:* (neuere Sticks)
planned packages
- yavdr-hardware-sundtek (basic configuration files and scripts, sundtek-avahi-mounter)
- python3-sundtek (Python C-extension for sundtek API)
- yavdr-backend-sundtek (WFE)
TODO drivers for TT S2-6400 FF
https://github.com/s-moch/linux-saa716x - kann man den relevanten Teil als dkms-Paket bauen?
autoinstall-ubuntu-drivers
The tool ubuntu-drivers is used to install the matching driver version for nvidia graphics cards, virtualbox guest additions and Intel and AMD microcode updates.
tasks
---
# file roles/autoinstall-ubuntu-drivers/tasks/main.yml
- name: autoinstall ubuntu-drivers-common
block:
- name: apt | install ubuntu-drivers-common
apt:
name: ubuntu-drivers-common
state: present
- name: use ubuntu-drivers to install additional drivers automatically
command: ubuntu-drivers --package-list /etc/yavdr/autoinstalled autoinstall
when: (ansible_virtualization_type != "virtualbox" and ansible_virtualization_role != "guest")
# ubuntu-drivers-common tries to autoinstall
# conflicting packages for virtualbox in Ubuntu 16.04 and 18.04 :(
# also alternates between virtualbox-guest-dkms and virtualbox-guest-dkms-hwe on successive runsautoinstall-virtualbox-guest
This role installs the guest additions for virtualbox guests on Ubuntu 18.04
---
# file roles/autoinstall-virtualbox-guest/tasks/main.yml
- name: collect facts about installed packages
package_facts:
manager: "apt"
- name: install virtualbox guest additions
block:
- name: install packages
apt:
state: present
name:
- dkms
- '{{ "virtualbox-guest-x11-hwe" if "xserver-xorg-hwe-18.04" in ansible_facts.packages else "virtualbox-guest-x11" }}'
- '{{ "virtualbox-guest-dkms-hwe" if "linux-generic-hwe-18.04" in ansible_facts.packages else "virtualbox-guest-dkms" }}'
# TODO: set xineliboutput as frontend
when:
- ansible_virtualization_type == "virtualbox"
- ansible_virtualization_role == "guest"
- ansible_distribution == "Ubuntu"
- name: set xineliboutput as frontend
block:
- apt:
name:
- vdr-plugin-xineliboutput
- xineliboutput-sxfe
state: present
- command: '{{ item }}'
with_items:
- vdrctl disable softhddevice
- vdrctl disable vaapidevice
- vdrctl disable xine
- vdrctl disable pvr350
- vdrctl enable xineliboutput
ignore_errors: yes
when:
- ansible_virtualization_type in ["virtualbox", "VirtualPC", "VMware"]
- ansible_virtualization_role == "guest"autoinstall-atric-usb
dependencies
---
dependencies:
- { role: collect-facts }
- { role: yavdr-remote }tasks
---
# file roles/autoinstall-atric-usb/tasks/main.yml
- name: install and configure Atric IR-WakeupUSB
block:
- name: apt | install lirc-drv-irman
apt:
name: lirc-drv-irman
state: present
tags:
- packages
- name: write lirc configuration
template:
src: templates/lirc_options.conf.j2
dest: /etc/lirc/lirc_options.conf
tags:
- config
- systemd
- name: enable lircd, eventlircd, lircd2uinput
systemd:
name: '{{ item }}'
enabled: yes
state: started
masked: no
daemon_reload: yes
with_items:
- eventlircd.service
- lircd2uinput.service
- lircd.service
tags:
- systemd
when: '"04d8:f844" in usb'templates
{{ ansible_managed | comment }}
[lircd]
nodaemon = False
driver = irman
device = /dev/irman
output = /var/run/lirc/lircd0
pidfile = /var/run/lirc/lircd0.pid
plugindir = /usr/lib/x86_64-linux-gnu/lirc/plugins
permission = 666
allow-simulate = No
repeat-max = 600
#loglevel = 6
#release = true
#release_suffix = _EVUP
#logfile = ...
#driver-options = ...
[lircmd]
uinput = False
nodaemon = Falseautoinstall-yausbir
dependencies
---
dependencies:
- { role: yavdr-remote }tasks
---
# file roles/autoinstall-atric-usb/tasks/main.yml
- name: install and configure Atric IR-WakeupUSB
block:
- name: apt | install lirc-drv-yausbir
apt:
name: lirc-drv-yausbir
state: present
tags:
- packages
- name: write lirc configuration
template:
src: templates/lirc_options.conf.j2
dest: /etc/lirc/lirc_options.conf
tags:
- config
- systemd
- name: enable lircd, eventlircd, lircd2uinput
systemd:
name: '{{ item }}'
enabled: yes
state: started
masked: no
daemon_reload: yes
with_items:
- eventlircd.service
- lircd2uinput.service
- lircd.service
tags:
- systemd
when: '"10c4:876c" in usb'templates
{{ ansible_managed | comment }}
[lircd]
nodaemon = False
driver = ya_usbir
output = /var/run/lirc/lircd0
pidfile = /var/run/lirc/lircd0.pid
plugindir = /usr/lib/x86_64-linux-gnu/lirc/plugins
permission = 666
allow-simulate = No
repeat-max = 600
#loglevel = 6
#release = true
#release_suffix = _EVUP
#logfile = ...
#driver-options = ...
[lircmd]
uinput = False
nodaemon = Falseautoinstall-satip
If a Sat>IP Server responds to a discovery request, the package vdr-plugin-satip is installed.
tasks
---
# file roles/autoinstall-satip/tasks/main.yml
- name: "detect SAT>IP Server(s) on the network"
action: satip_facts
- debug:
var: satip_devices
verbosity: 1
- name: apt | install vdr-plugin-satip if a Sat>IP server has been detected
apt:
name: vdr-plugin-satip
state: present
when: satip_devices
notify: [ 'Restart VDR' ]autoinstall-targavfd
tasks
---
# file roles/autoinstall-targavfd/tasks/main.yml
- name: apt | install vdr-plugin-targavfd if connected
apt:
name: vdr-plugin-targavfd
when: '"19c2:6a11" in usb'
notify: [ 'Restart VDR' ]autoinstall-imonlcd
tasks
---
# file roles/autoinstall-imonlcd/tasks/main.yml
- name: apt | install vdr-plugin-imonlcd if connected
apt:
name: vdr-plugin-imonlcd
when: '"15c2:0038" in usb or "15c2:ffdc" in usb'
notify: [ 'Restart VDR' ]autoinstall-libcecdaemon
tasks
---
# file roles/autoinstall-libcec-daemon/tasks/main.yml
- name: apt | install libcec-daemon if connected
apt:
name: libcec-daemon
when:
- "2548:1002" in usbautoinstall-pvr350
tasks
---
# file roles/autoinstall-pvr350/tasks/main.yml
- name: apt | install vdr-plugin-pvr350 if connected
apt:
name: vdr-plugin-pvr350
when: '"0070:4000" in pci'
notify: [ 'Restart VDR' ]autoinstall-hauppauge-pvr
---
# file roles/autoinstall-hauppauge-pvr/tasks/main.yml
- name: apt | install vdr-plugin-pvrinput if a haupauge pvr card is found
apt:
name: vdr-plugin-pvrinput
when: '"0070:4000" in pci or "4444:0016" in pci'
notify: [ 'Restart VDR' ]autoinstall-firmware
dependencies
---
dependencies:
- { role: collect-facts }tasks
---
# This role provides easyily downloadable firmware files
- name: Firmware dvb-demod-si2168-b40-01.fw for Hauppauge WinTV HD Solo/Duo, PCTV 292e
get_url:
url: https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-demod-si2168-b40-01.fw
checksum: sha256:8507536630d75a316d0719d6b95c04b90c36baa5b457ad457c9bacadafcef134
dest: /lib/firmware/dvb-demod-si2168-b40-01.fw
when: '"2040:0264" in usb or "2013:025f" in usb'
- name: Firmware dvb-fe-xc5000-1.6.114.fw for Hauppauge WinTV-HVR-930C
get_url:
url: https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-fe-xc5000-1.6.114.fw
checksum: sha256:7104bda8df301fe1bd4c09de1708aeb6d0d8e1f9d55505449fecfad82639235f
dest: /lib/firmware/dvb-fe-xc5000-1.6.114.fw
when: '"2040:1605" in usb'
- name: Firmware ngenge_18.fw for ngene cards
get_url:
url: http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw
checksum: sha256:213d98ec2cd575eba15d82ee79fed7098e670de43792f8aa773a95cfb7c32060
dest: /lib/firmware/ngene_18.fw
when: '"ngene" in modules'
notify: reboot required
- name: Firmware drxk_a3.mc for drxk
get_url:
url: https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/drxk_a3.mc
checksum: sha256:f8956ad6f92a4ce90a6ab94ed23e2f9a27e9317e936fd3e0119778dd28e7e294
dest: /lib/firmware/drxk_a3.mc
when: '"ngene" in modules or "drxk" in modules'
notify: reboot requiredautoinstall-dvbsky-firmware
dependencies
---
dependencies:
- { role: collect-facts }defaults
tasks
TODO autoinstall-dvbhddevice
How to get a driver for the TT-6400 FF card? Needed firmware files are in the yavdr-firmware package.
dependencies
---
dependencies:
- { role: collect-facts }tasks
---
# file roles/autoinstall-dvbhddevice/tasks/main.yml
- name: apt | install vdr-plugin-dvbhddevice if connected
apt:
name:
- vdr-plugin-dvbhddevice
- yavdr-firmware
when: '"13c2:300a" in pci or "13c2:300b" in pci'
notify: [ 'Restart VDR' ]TODO autoinstall-dvbsddevice
dependencies
---
dependencies:
- { role: collect-facts }tasks
---
# file roles/autoinstall-dvbsddevice/tasks/main.yml
# TODO: install firmware
- name: apt | install vdr-plugin-dvbsddevice if module is loaded
apt:
name:
- vdr-plugin-dvbsddevice
- yavdr-firmware
when: '"dvb_ttpci" in modules'
notify: [ 'Restart VDR' ]autoinstall-hardware-irmp
dependencies
---
dependencies:
- { role: collect-facts }tasks
---
# file roles/autoinstall-hardware-irmp/tasks/main.yml
- name: apt | install yavdr-hardware-irmp if connected
apt:
name: yavdr-hardware-irmp
state: present
when: '"1209:4444" in usb or "16c0:27d9" in usb'Serial IR Receivers
This role preconfigures the system for serial "homebrew" receivers. Newer kernel versions provide serial_ir which acts as a rc-core driver, so we don't need lircd - eventlircd can use the device directly.
As configured in the role yavdr-remote (/etc/rc_maps.cfg) a keytable for a RC-6 MCE remote is loaded by default. You can choose a different keymap which may also use another ir-protocol.
defaults
---
# file: roles/serial-ir/defaults/main.yml
serial_ir_device: ttyS0tasks
---
# file: roles/serial-ir/tasks/main.yml
- name: apt | install setserial
apt:
name: setserial
- name: load serial_ir on startup
template:
src: roles/serial-ir/templates/modules-load.d/serial_ir.conf.j2
dest: /etc/modules-load.d/serial_ir.conf
- name: serial_ir module options
template:
src: roles/serial-ir/templates/modprobe.d/serial_ir.conf.j2
dest: /etc/modprobe.d/serial_ir.conf
- name: setserial options
template:
src: roles/serial-ir/templates/serial.conf.j2
dest: /etc/serial.conftemplates
load serial_ir on startup
{{ ansible_managed | comment }}
serial_irserial_ir module options
{{ ansible_managed | comment }}
{% if serial_ir_device == "ttyS0" %}
#COM1 equivalent, /dev/ttyS0
options serial_ir irq=4 io=0x3f8
{% elif serial_ir_device == "ttyS1" %}
#COM2 equivalent, /dev/ttyS1
options serial_ir irq=3 io=0x2f8
{% endif %}
{% if serial_ir_device in ("ttyS0", "ttyS1") %}
install serial_ir setserial /dev/{{serial_ir_device}} uart none; /sbin/modprobe --ignore-install serial_ir
{% endif %}setserial options
{{ ansible_managed | comment }}
{% if serial_ir_device == "ttyS0" %}
#COM1 equivalent, /dev/ttyS0
/dev/ttyS0 uart none
{% elif serial_ir_device == "ttyS1" %}
#COM2 equivalent, /dev/ttyS1
/dev/ttyS1 uart none
{% endif %}kodi
tasks
Install KODI
main.yml
install-kodi.yml
configure-kodi.yml
templates
kodi.service
This systemd unit for the user session starts (and stops) kodi.
set-kodi-diplay
This is a version-dependent script to force KODI to use the display set by the environment variable DISPLAY. The following Version is intended for KODI 18.
files
Those configuration files provide a preconfiguration for kodi which overrides the system wide configuration
Lircmap.xml
This file allows to map keys sent by remotes via eventlircd (which uses the name devinput) to kodi key names.
keymaps
This file maps the keys defined in Lircmap.xml to actions within kodi.
remote.xml
dvd
tasks
install libdvd-pkg, allow programs to eject optical media
vdr-epg-daemon
This role installs the vdr-epg-daemon
defaults
tasks
templates
Template for /etc/mysql/mariadb.conf.d/99-epgd.cnf
to allow Database access from all hosts on network
file: roles/epgd/templates/etc_mysql_mariadb.conf.d_99-epgd.cnf.j2
template for /root/.ssh/mysqlpasswd so epgd-tool is happy
file: roles/epgd/templates/root_.ssh_mysqlpasswd.j2
template for /etc/epgd/epgd.conf
file: roles/epgd/templates/etc_epgd_epgd.conf.j2
install-sundtek
dependencies
---
dependencies:
- { role: collect-facts }defaults
---
# file: roles/install-sundtek/defaults/main.yml
sundtek:
install: auto
wait_for_devices: true
wait_for_network: falsetasks
---
# file roles/install-sundtek/tasks/main.yml
# TODO: include LD_PRELOAD and other dependencies in yavdr-hardware-sundtek package
#- name: apt | install yavdr-hardware-sundtek
# apt:
# name: yavdr-hardware-sundtek
- name: expand template for custom sundtek.service
template:
src: templates/systemd/sundtek.service.j2
dest: /etc/systemd/systemd/sundtek.service
when: sundtek.install
- name: apt | install sundtek dvb driver
apt:
name: dvb-driver-sundtek
state: present
when: sundtek.install
# TODO: state should depend on sundtek.install:
# '{{ "present" if sundtek.install else "absent" }}'
- name: apt | install vdr-plugins for dynamic sundtek configuration else uninstall
apt:
name:
- vdr-plugin-dynamite
- vdr-plugin-sundtek
state: '{{ "absent" if sundtek.wait_for_devices else "present" }}'
when: sundtek.install
- name: systemd | start sundtek.service
systemd:
name: sundtek.service
state: started
enabled: yes
masked: no
daemon-reload: yes
when: sundtek.install
# TODO: Scan for local and remote sundtek sticks and create
# /etc/sundtek.conf - needs yavdr-hardware-sundtek
#- name: detect local and remote sundtek devices
# command: scansundtek
# register: sundtek_scan
#
# - name: set variable sundtek_scan
# set_fact:
# sundtek_devices: "{{ sundtek_scan.stdout | from_json }}"
#
#- name: create /etc/sundtek.conf
# template:
# src: templates/sundtek.conf.j2
# dest: /etc/sundtek.conf
# notify: Restart sundtek.service
- name: set LD_PRELOAD for sundtek driver to VDR's environment
template:
src: templates/systemd/vdr.service.d/sundtek.conf.j2
dest: /etc/systemd/system/vdr.service.d/sundtek_LD_PRELOAD.conf
notify: ['Restart VDR']
# TODO: enable sundtek-avahi-mounter (needs to be ported to python3 and
# work indenpendently of yavdrhw.db files)
#- name: systemd | start sundtek-avahi-mounter.service
# systemd:
# name: sundtek-avahi-mounter.service
# state: started
# masked: no
# enabled: yes
# daemon-reload: yestemplates
LD_PRELOAD for vdr.service
{{ ansible_managed | comment }}
{% if sundtek.install %}
[Service]
Environment=LD_PRELOAD=/opt/lib/libmediaclient.so
{% endif %}/etc/systemd/system/sundtek.service
{{ ansible_managed | comment }}
[Unit]
Description=Sundtek mediasrv
{% if sundtek.wait_for_network %}
After=network-online.target
{% endif %}
Before=vdr.service
[Service]
Type=forking
ExecStart=/opt/bin/mediasrv -d --pluginpath=/opt/bin {% if sundtek.wait_for_devices %}--wait-for-devices{% endif%}
ExecStop=/opt/bin/mediaclient --shutdown
Restart=on-failure
[Install]
WantedBy=multi-user.target/etc/sundtek.conf
{{ ansible_managed | comment }}
# ----- GLOBAL SECTION -----
#Set loglevel for logging to /var/log/mediasrv.log
#autoupdate=[on|off] #enable automatic driver update, default off
autoupdate=off
#loglevel=[off|min|full] #default: off
#max .. little bit more
loglevel=off
#pluginpath=/path/to/drivers #set path to drivers
#dvb_api_version=x.y #default API version will be parsed from
#/usr/include/linux/dvb/version.h, if no such file is
#available the latest internally supported API ::version will be
#used (which will be quite new)
#audio_skip_bytes=N #when changing analogTV channels,
#skip N bytes to suppress audio noise
#bulk_notification[on|off] #default off, bulk_notification will only trigger device_attach once
#after the the first device scan when the driver is started up
#after this first scan, the notification will be triggered
#normally again for each device.
#
#for example when 2 devices are attached to the system only one
#notification will be triggered initially, any at a later time
#attached device will generate another device_attach notification
#by default each device will call the script which is set up with
#device_attach
#use_tvvideo=[on|off] #use /dev/tvvideoN instead of /dev/video
#this works around a new Adobe Flash bug in 2012, where flash crashes
#if files (/dev/videoN) other than /dev/video0 are available
#use_hwpidfilter=[on|off] #For DVB-C, DVB-T, DVB-S/S2
#enable PID filter, please be careful with that, there are only 15 HW Pid filters available
#when more than 15 pids are set up the pid filter will be disabled automatically
#dmhwpidfilter=[on|off] #default on, in some cases off might be useful to disable hw pid filter for settopboxes
#if you get a black image when capturing a TV channel and watching another channel on the
#same transponder - try this option and reboot
#usb_transaction_delay=[0-20] #throttle the USB setup transactions, this can solve problems with weak USB stacks for
#example for embedded boards, unit is milliseconds
#usb_timeout=[0 - N] #USB timeout for each transaction in milliseconds, 0 default infinite
#voltage_tone_off=[1 or 0] #0 .. default, normal behaviour
#1 .. force DVB-S/S2 to not use any Voltage or Tone (ignore any user parameters)
#ir_disabled=[1 or 0] #0 .. enable remote control polling, the driver will permanently check for remote control keys
#1 .. disable remote control polling, might fix bugs with weak USB stacks on embedded boards
#
#Enable listening on network
#enablenetwork=[on|off] #default: off
#Lowest adapter number to start with, e.g. /dev/dvb/adapter5/frontend0
#first_adapter=5
#Call attach script when new device appears
#device_attach=[PATH_TO_SCRIPT] [PARAMETER|DEVID] #"DEVID" will automatically be replaced with the device ID
device_attach=/usr/bin/sundtek_attach
#Call detach script when device disappears
#device_detach=[PATH_TO_SCRIPT] [PARAMETER|DEVID] #"DEVID" will automatically be replaced with the device ID
device_detach=/usr/bin/sundtek_detach
{% if sundtek_devices is definded %}
{% for device in sundtek_devices.local %}
{% if device.serial is defined %}
[{{ device.serial }}]
#Infrared protocol to use
#ir_protocol=[RC5|NEC|RC6] #default: NEC
{% if device.ir_protocol|default("") %}
ir_protocol={{ device.ir_protocol }}
{% endif %}
#Keymap to use, e.g. "/lib/udev/rc_keymaps/vp702x"
#rcmap=[PATH_TO_KEYMAP] #default: keymap which comes with the device
{% if device.rcmap|default("") %}
rcmap={{ device.rcmap }}
{% endif %}
#Choose initial DVB mode for hybrid DVB-T/DVB-C devices only
#initial_dvb_mode=[DVBC|DVBT]
{% if device.initial_dvb_mode|default("") %}
initial_dvb_mode={{ device.dvb_mode }}
{% endif %}
#Call attach script when new device appears
#device_attach=[PATH_TO_SCRIPT] [PARAMETER|DEVID] #"DEVID" will automatically be replaced with the device ID
device_attach=/usr/bin/sundtek_attach
#Call detach script when device disappears
#device_detach=[PATH_TO_SCRIPT] [PARAMETER|DEVID] #"DEVID" will automatically be replaced with the device ID
device_detach=/usr/bin/sundtek_detach
{% if device.capabilites.analog_tv %}
disable_analogtv=1 #disable initialization of analogTV Frontend
{% endif %}
{% endif %}
{% endfor %}
{% endif %}template-test
---
- name: show vars
debug:
var: '{{ system }}'
- name: test templates
template:
src: templates/test.j2
dest: /tmp/test.txt{{ ansible_managed | comment }}
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
{% if system.x11.dualhead.enabled %}
Screen 1 "Screen1" RightOf "Screen0"
{% endif %}
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
# ignore devices with eventlircd tag
# ENV{ID_INPUT.tags}+="eventlircd"
# must be set by an udev rule
Section "InputClass"
Identifier "ignore eventlircd devices"
MatchTag "eventlircd"
Option "Ignore" "True"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
{% if system.x11.display.0.default == "VGA2Scart_4_3" or system.x11.display.0.default == "VGA2Scart_16_9" %}
HorizSync 14-17
VertRefresh 49-61
{% if system.x11.display.0.default == "VGA2Scart_4_3" %}
Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace
{% elif system.x11.display.0.default == "VGA2Scart_16_9" %}
Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace
{% endif %}
{% endif %}
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
EndSection
{% if system.x11.dualhead.enabled == "1" %}
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Unknown"
{% if system.x11.display.1.default in ("VGA2Scart_4_3", "VGA2Scart_16_9") %}
HorizSync 14-17
VertRefresh 49-61
{% if system.x11.display.1.default == "VGA2Scart_4_3" %}
Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace
{% elif system.x11.display.1.default == "VGA2Scart_16_9" %}
Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace
{% endif %}
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
{% endif %}
EndSection
{% endif %}
Section "Device"
Identifier "Device0"
{% if system.hardware.nvidia.detected %}
Driver "nvidia"
VendorName "NVIDIA Corporation"
{% endif %}
Screen 0
Option "DPI" "100x100"
{% if system.hardware.nvidia.busid %}
BusID "PCI: {{ system.hardware.nvidia.busid }}"
{% endif %}
Option "NoLogo" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "False"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "DynamicTwinView" "0"
Option "OnDemandVBlankinterrupts" "on"
Option "FlatPanelProperties" "Scaling = Native"
EndSection
{% if system.x11.dualhead.enabled == "1" %}
Section "Device"
Identifier "Device1"
{% if system.hardware.nvidia.detected %}
Driver "nvidia"
VendorName "NVIDIA Corporation"
{% endif %}
Screen 1
{% if system.hardware.nvidia.busid %}
BusID "PCI: {{ system.hardware.nvidia.busid }}"
{% endif %}
Option "NoLogo" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "False"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "DynamicTwinView" "0"
EndSection
{% endif %}
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
{% if system.x11.display.0.default is defined and system.x11.display.0.default %}
Modes "{{ system.x11.display.0.default }}"{% for mode in system.x11.display.0.mode %}{% if mode != system.x11.display.0.default %} "{{ mode }}"{% endif %}{% endfor %}
{% elif system.hardware.nvidia.detected == 1 %}
Modes "nvidia-auto-select"
{% endif %}
EndSubSection
{% if system.x11.display.0.default or system.x11.default %}
{% if system.x11.display.0.device is defined and system.x11.display.0.device %}
Option "ConnectedMonitor" {{ system.x11.display.0.device }}
{% else %}
Option "ConnectedMonitor" {{ system.x11.default }}
{% endif %}
# Option "ConnectedMonitor" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?><?cs if:(?system.x11.dualhead.enabled && system.x11.dualhead.enabled == 1) ?>, <?cs call:fix_display_name(system.x11.display.1.device) ?><?cs /if ?>"
#Option "ConnectedMonitor"
"<?cs if:(?system.x11.display.0.device) ?>
<?cs call:fix_display_name(system.x11.display.0.device) ?>
<?cs else ?>
<?cs var:system.x11.default ?>
<?cs /if ?>
<?cs if:(?system.x11.dualhead.enabled && system.x11.dualhead.enabled == 1) ?>, <?cs call:fix_display_name(system.x11.display.1.device) ?><?cs /if ?>"
# Option "UseDisplayDevice" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?>"
# <?cs /if ?>
# <?cs if:(?system.hardware.nvidia.0.edid && system.hardware.nvidia.0.edid == "1") ?>
# Option "CustomEDID" "<?cs call:fix_display_name(system.x11.display.0.device) ?>:/etc/X11/edid.0.yavdr"
# <?cs /if ?>
# <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.0.device) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:system.x11.display.0.default ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }"
# <?cs each:mode = system.x11.display.0.mode ?><?cs if:(mode != system.x11.display.0.default) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?>
{% endif %}
EndSection
{% if system.x11.dualhead.enabled == "1" %}
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
{% if system.x11.display.0.default is defined and system.x11.display.0.default %}
Modes "{{ system.x11.display.1.default }}"{% for mode in system.x11.display.1.mode %}{% if mode != system.x11.display.1.default %} "{{ mode }}"{% endif %}{% endfor %}
{% elif system.hardware.nvidia.detected == "1" %}
Modes "nvidia-auto-select"
{% endif %}
EndSubSection
# <?cs if:(?system.x11.display.1.default && system.x11.display.1.default != "" && system.x11.display.1.default != "disabled") ?>
# Option "UseDisplayDevice" "<?cs call:fix_display_name(system.x11.display.1.device) ?>"
# <?cs /if ?>
# <?cs if:(?system.hardware.nvidia.1.edid && system.hardware.nvidia.1.edid == "1") ?>
# Option "CustomEDID" "<?cs call:fix_display_name(system.x11.display.1.device) ?>:/etc/X11/edid.1.yavdr"
# <?cs /if ?>
# <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.1.device) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:system.x11.display.1.default ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }"
# <?cs each:mode = system.x11.display.1.mode ?><?cs if:(mode != system.x11.display.1.default) ?>
# Option "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?>
# <?cs /if ?>
EndSection
{% endif %}
{% if not system.x11.use_compositing %}
Section "Extensions"
# if not open-gl OSD is needed (e.g. for vdr-sxfe):
Option "Composite" "Disable"
EndSection
{% endif %}foo:
- bar
- baz
- spam
system:
hardware:
nvidia:
detected: "1"
busid: "000:2304:234"
x11:
dualhead:
enabled: "0"
display:
0:
mode:
- "1920x1080_50"
default: "nvidia-auto"
1:
mode:
- "1280x720_60"wakeup
defaults
---
# file roles/wakeup/defaults/main.yml
wakeup_method: "acpiwakeup"tasks
---
# file roles/wakeup/tasks/main.yml
- name: install and configure vdr-addon-acpiwakeup
apt:
name: vdr-addon-acpiwakeup
state: present
when: wakeup_method == "acpiwakeup"
- name: expand template for /etc/vdr/vdr-addon-acpiwakeup.conf
template:
src: templates/vdr-addon-acpiwakeup.conf.j2
dest: /etc/vdr/vdr-addon-acpiwakeup.conftemplates
{{ ansible_managed | comment }}
# Activate/deactivate ACPIWakeup with yes/no:
ACPI_ENABLED="{% if wakeup_method == 'acpiwakeup' %}yes{% else %}no{% endif %}"
# How many minutes should the machine wake up before the timer starts:
ACPI_START_AHEAD=5
# If you want your VDR machine to wakeup in regular intervals (i.e. for
# updating EPG data), specify the days of the week and the wakeup time.
#
# Days of the week for regular wakeup (not set=Disabled, 1=Monday...7=Sunday)
# ACPI_REGULAR_DAYS="1 2 3 4 5 6 7"
# Wakeup time
#ACPI_REGULAR_TIME=01:00 # HH:MMgrub-config
default variables
system:
shutdown: poweroff
grub:
timeout: 0
boot_options: quiet nosplashtasks
---
- name: custom grub configuration for timeout and reboot halt
template:
src: templates/50_custom.j2
dest: /etc/grub.d/50_custom
mode: '0775'
notify: [ 'Update GRUB' ]
# TODO: add special case if plymouth is used
- name: let the system boot quietly
lineinfile:
dest: /etc/default/grub
state: present
regexp: '^(GRUB_CMDLINE_LINUX_DEFAULT=")'
line: '\1{{ grub.boot_options}}"'
backrefs: yes
notify: [ 'Update GRUB' ]templates
#!/bin/sh
{{ ansible_managed | comment }}
exec tail -n +3 $0
{% if system.shutdown is defined and system.shutdown == 'reboot' %}
menuentry "PowerOff" {
halt
}
{% endif %}
if [ "${recordfail}" = 1 ]; then
set timeout={{ 3 if grub.timeout < 3 else grub.timeout }}
else
set timeout={{ grub.timeout if grub.timeout is defined else 0 }}
fihandlers
---
- name: Update Initramfs
command: "update-initramfs -u"
failed_when: ('error' in initramfs_register_update.stderr)
register: initramfs_register_update
- name: Update GRUB
command: update-grub
failed_when: ('error' in grub_register_update.stderr)
register: grub_register_update
# TODO: Do we need to use grub-set-default?
# https://github.com/yavdr/yavdr-utils/blob/master/events/actions/update-grubModules
This section contains custom modules for the yaVDR Playbooks. They are used to collect facts about the system and configure applications and daemons.
hardware_facts.py
# This Module collects the vendor- and device ids for USB- and PCI(e)-devices and currently loaded kernel modules.
DOCUMENTATION = '''
---
module: hardware_facts
short_description: collects facts for kernel modules, usb and pci devices
description:
- This Module collects the vendor- and device ids for USB- and PCI(e)-devices and
currently loaded kernel modules.
options:
usb:
required: False
default: True
description:
- return a list of vendor- and device ids for usb devices in '04x:04x' notation
pci:
required: False
default: True
description:
- return a list of vendor- and device ids for pci devices in '04x:04x' notation
modules:
required: False
default: True
description:
- return a list of currently loaded kernel modules
gpus:
required: False
default: True
description:
- return a list of devices of the pci gpu class (0x030000)
acpi_power_modes:
required: False
default: True
description:
- return a list of supported acpi power saving modes
notes:
- requres python-pyusb and python-kmodpy
requirements: [ ]
author: "Alexander Grothe <seahawk1986@gmx.de>"
'''
EXAMPLES = '''
- name: get information about usb and pci hardware and loaded kernel modules
hardware_facts:
usb: True
pci: True
modules: True
acpi_power_modes: True
- debug:
var: usb
- debug:
var: pci
- debug:
var: modules
- debug:
var: gpus
'''
import glob
import json
import os
import sys
import usb.core
from collections import namedtuple
from itertools import chain
import kmodpy
from ansible.module_utils.basic import *
PCIDevice = namedtuple("PCIDevice", 'idVendor idProduct idClass pciPath')
vendor_dict = {
0x10de: 'nvidia',
0x8086: 'intel',
0x1002: 'amd',
0x80ee: 'virtualbox',
}
def get_pci_devices():
for device in chain(glob.glob('/sys/devices/pci*/*:*:*/'), glob.glob('/sys/devices/pci*/*:*:*/*:*:*/')):
try:
with open(os.path.join(device, 'device')) as d:
product_id = int(d.read().strip(), 16)
with open(os.path.join(device, 'vendor')) as d:
vendor_id = int(d.read().strip(), 16)
with open(os.path.join(device, 'class')) as d:
class_id = int(d.read().strip(), 16)
yield PCIDevice(idVendor=vendor_id, idProduct=product_id, idClass=class_id, pciPath=device)
except IOError:
pass
def format_device_list(iterator):
return ["{:04x}:{:04x}".format(d.idVendor, d.idProduct) for d in iterator]
def format_gpu_device_list(iterator):
def get_entries(iterator):
for d in iterator:
if d.idClass == 0x030000:
yield {"VendorName": vendor_dict.get(d.idVendor, "unknown"),
"VendorID": d.idVendor, "ProductID": d.idProduct}
return [entry for entry in get_entries(iterator)]
def list_acpi_power_modes():
acpi_power_modes = []
try:
with open('/sys/power/state') as f:
acpi_power_modes = [l for l in f.readline().split()]
except IOError:
pass
return acpi_power_modes
arg_specs = {
'usb': dict(default=True, type='bool', required=False),
'pci': dict(default=True, type='bool', required=False),
'modules': dict(default=True, type='bool', required=False),
'gpus': dict(default=True, type='bool', required=False),
'acpi_power_modes': dict(default=True, type='bool', required=False),
}
def main():
module = AnsibleModule(argument_spec=arg_specs, supports_check_mode=True,)
collect_usb = module.params['usb']
collect_pci = module.params['pci']
collect_modules = module.params['modules']
collect_gpus = module.params['gpus']
collect_acpi_power_modes = module.params['acpi_power_modes']
usb_devices = []
pci_devices = []
modules = []
gpus = []
nvidia_detected = False
intel_detected = False
amd_detected = False
virtualbox_detected = False
acpi_power_modes = []
if collect_usb:
usb_devices = format_device_list(usb.core.find(find_all=True))
if collect_pci:
pci_devices = format_device_list(get_pci_devices())
if collect_modules:
k = kmodpy.Kmod()
modules = [m[0] for m in k.loaded()]
if collect_gpus:
gpus = format_gpu_device_list(get_pci_devices())
nvidia_detected = any((True for gpu in gpus if gpu['VendorName'] == 'nvidia'))
intel_detected = any((True for gpu in gpus if gpu['VendorName'] == 'intel'))
amd_detected = any((True for gpu in gpus if gpu['VendorName'] == 'amd'))
virtualbox_detected = any((True for gpu in gpus if gpu['VendorName'] == 'virtualbox'))
if collect_acpi_power_modes:
acpi_power_modes = list_acpi_power_modes()
data = {'usb': usb_devices, 'pci': pci_devices, 'modules': modules, 'gpus': gpus,
'acpi_power_modes': acpi_power_modes, 'nvidia_detected': nvidia_detected,
'intel_detected': intel_detected, 'amd_detected': amd_detected,
'virtualbox_detected': virtualbox_detected}
module.exit_json(changed=False, ansible_facts=data, msg=data)
if __name__ == '__main__':
main()pci_facts.py
# This module parses the output of lspci for detailed information about available (sub) devices.
DOCUMENTATION = '''
---
module: pci_facts
short_description: parses lspci output for detailed (sub) devices data
description:
- This module parses the output of lspci for detailed information about available (sub) devices.
- returns a list with a dict for each device
notes:
- requires lspci (package pciutils)
'''
EXAMPLES = '''
- name: get detailled pci device infos
pci_facts:
- debug:
var: pci_devices
'''
import argparse
import shlex
import subprocess
from collections import namedtuple
from ansible.module_utils.basic import *
def convert2hex(arg):
arg = arg.strip('"')
if arg:
return int(arg, 16)
else:
return None
def parse_lspci_data():
parser = argparse.ArgumentParser()
parser.add_argument('-r', '--revision', help='revision', type=convert2hex)
parser.add_argument('-p', '--progif', help='proginf', type=convert2hex)
parser.add_argument('slot')
parser.add_argument('device_class', type=convert2hex)
parser.add_argument('vendor_id', type=convert2hex)
parser.add_argument('device_id', type=convert2hex)
parser.add_argument('sub_vendor_id', type=convert2hex)
parser.add_argument('sub_device_id', type=convert2hex)
parser.add_argument('other', nargs='*', default=[])
devices = []
for line in subprocess.check_output(['lspci', '-nm'], universal_newlines=True).splitlines():
args = parser.parse_args(args=shlex.split(line))
devices.append(vars(args))
return devices
def main():
arg_specs = {}
module = AnsibleModule(argument_spec=arg_specs, supports_check_mode=True,)
try:
pci_devices = parse_lspci_data()
except:
module.fail_json(msg="Something fatal happened")
data = {'pci_devices': pci_devices}
module.exit_json(changed=False, ansible_facts=data, msg=data)
if __name__ == '__main__':
main()satip_facts.py
DOCUMENTATION = '''
---
module: hardware_facts
short_description: "check if at least one SAT>IP server responds on the network"
description:
- This script sends a multicast message and awaits responses by Sat>IP servers.
Returns a list of detected SAT>IP servers with their name and capabilites.
'''
EXAMPLES = '''
- name: "detect SAT>IP Server on the network"
action: satip_facts
- debug:
var: satip_devices
'''
import json
import socket
import sys
import time
import xml.etree.ElementTree as ET
import requests
from contextlib import contextmanager
from ansible.module_utils.basic import *
SSDP_BIND = "0.0.0.0"
SSDP_ADDR = "239.255.255.250"
SSDP_PORT = 1900
# SSDP_MX = max delay for server response
# a value of 2s is recommended by the SAT>IP specification 1.2.2
SSDP_MX = 2
SSDP_ST = "urn:ses-com:device:SatIPServer:1"
ssdpRequest = "\r\n".join((
"M-SEARCH * HTTP/1.1",
"HOST: %s:%d" % (SSDP_ADDR, SSDP_PORT),
"MAN: \"ssdp:discover\"",
"MX: %d" % (SSDP_MX),
"ST: %s" % (SSDP_ST),
"\r\n"))
@contextmanager
def socket_manager(*args, **kwargs):
"""provide a context manager for socket"""
sock = socket.socket(*args, **kwargs)
sock.setblocking(False)
sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 2)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
try:
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1)
except socket.error:
pass
sock.settimeout(SSDP_MX + 0.5)
sock.bind((SSDP_BIND, SSDP_PORT))
try:
yield sock
finally:
sock.close()
def parse_satip_xml(data):
""" Parse SAT>IP XML data.
Args:
data (str): XML input data..
Returns:
dict: Parsed SAT>IP device name and frontend information.
"""
result = {'name': '', 'frontends': {}}
if data:
root = ET.fromstring(data)
name = root.find('.//*/{urn:schemas-upnp-org:device-1-0}friendlyName')
result['name'] = name.text
satipcap = root.find('.//*/{urn:ses-com:satip}X_SATIPCAP')
if satipcap is None:
raise ValueError("Invalid SAT>IP device description")
caps = {}
for system in satipcap.text.split(","):
cap = system.split("-")
if cap:
count = int(cap[1])
if cap[0] in caps:
count = count + caps[cap[0]]
caps[cap[0]] = count
result['frontends'] = caps
return result
def main():
description_urls = []
device_list = []
module = AnsibleModule(argument_spec={}, supports_check_mode=True,)
with socket_manager(socket.AF_INET, socket.SOCK_DGRAM) as sock:
# according to Sat>IP Specification 1.2.2, p. 20
# a client should send three requests within 100 ms with a ttl of 2
for _ in range(3):
sock.sendto(ssdpRequest, (SSDP_ADDR, SSDP_PORT))
time.sleep(0.03)
try:
response = sock.recv(1024)
if response and "SERVER:" in response:
for line in response.splitlines():
if "LOCATION" in line:
url = line.split()[-1].strip()
if url not in description_urls:
description_urls.append(url)
info = requests.get(url, timeout=2)
device_list.append(parse_satip_xml(info.text))
else:
raise ValueError('No satip server detected')
except (socket.timeout, ValueError, ET.ParseError):
pass
module.exit_json(changed=False, ansible_facts={'satip_devices': device_list})
if __name__ == '__main__':
main()xrandr_facts.py
- support multiple screens (-d :0.0 .. :0.n)
rmmod.py
Handlers
- name: Reconfigure unattended upgrades with dpkg
command: '/usr/sbin/dpkg-reconfigure --frontend noninteractive unattended-upgrades'
- name: Trigger Udev
command: 'udevadm trigger '
- name: Restart Samba
systemd:
name: smbd.service
state: restarted
enabled: yes
#masked: no
register: samba_reload
- name: Restart NFS Kernel Server
systemd:
name: nfs-server.service
state: restarted
enabled: yes
#masked: no
register: nfs_reload
- name: Restart sundtek.service
systemd:
name: sundtek.service
state: restarted
enabled: yes
masked: no
- name: Restart VDR
systemd:
name: vdr.service
state: restarted
enabled: yes
register: vdr_restart
- name: Stop VDR
systemd:
name: vdr.service
state: stopped
enabled: yes
register: vdr_stop
- name: Start VDR
systemd:
name: vdr.service
state: started
enabled: yes
register: vdr_start
- name: Start yavdr-xorg
systemd:
daemon_reload: yes
name: 'yavdr-xorg'
enabled: yes
state: started
register: yavdr_xorg_start
- name: Stop xlogin
systemd:
name: xlogin@vdr.service
state: stopped
enabled: yes
register: xlogin_stop
- name: Start xlogin
systemd:
daemon_reload: yes
name: 'xlogin@{{ vdr.user }}'
enabled: yes
state: started
register: xlogin_start
- name: Stop x
systemd:
name: x@vt7.service
state: stopped
register: x_stop
- name: reboot required
debug:
msg: PLEASE REBOOT YOUR SYSTEM.