yavdr-ansible/Manual.org at 8cf3cb48855dd4150843b18c49419b92713dee50

Alexander Grothe d6647e1613 Move local fact scripts to modules

2017-03-03 10:39:59 +01:00

39 KiB

Raw Blame History

Installing and configuring yaVDR with Ansible
Playbooks
- yavdr07.yml
- yavdr07-headless.yml
Hosts
Group Variables
Roles
Modules
- hardware_facts.py
- satip_facts.py
Handlers

Installing and configuring yaVDR with Ansible

This is an experimental feature which allows to set up a yaVDR installation based on a normal Ubuntu Server 16.04.x installation using Ansible.

This Manual is written in org-mode for Emacs and can rewrite the complete ansible configuration if you call org-babel-tangle from within emacs.

Playbooks

yavdr07.yml

The yavdr07.yml playbook sets up a fully-featured yaVDR installation:

---
# file: yavdr07.yml
# this playbook sets up a complete yaVDR 0.7 installation

- name: set up yaVDR
  hosts: all
  become: true
  roles:
     - yavdr-common   # install and configure the basic system
     - vdr            # install vdr and related packages
     - yavdr-network  # enable network client capabilities
     - samba-install  # install samba server
     - samba-config   # configure samba server
     #- nfs-server     # install nfs server
     #- nfs-config     # configure nfs server
     - yavdr-xorg     # graphical session
     - yavdr-remote   # remote configuration files, services and scripts
     - grub-config    # configure grub
     - autoinstall-satip # install vdr-plugin-satip if a Sat>IP server has been found
     - autoinstall-targavfd
     - autoinstall-imonlcd
     - template-test

  handlers:
    - include: handlers/main.yml

yavdr07-headless.yml

For a headless server installation yavdr07-headless.yml is a good choice

---
# file: yavdr07-headless.yml
# this playbook set up a headless yaVDR 0.7 installation

- name: set up a headless yaVDR server
  hosts: all
  become: true
  roles:
    - yavdr-common
    - vdr
    - yavdr-network
    - samba-server
    - samba-config
    - nfs-server
    - nfs-config
    - grub-config
  handlers:
    - include: handlers/main.yml

Hosts

This playbook can either be used to run the installation on the localhost or any other PC in the network that can be accessed via ssh. Simply add the host names or IP addresses to the hosts file in the respective section:

[yavdr-full]
localhost connection=local
#192.168.1.116

[yavdr-headless]

[yavdr-client]

Group Variables

default text for templates

# file: group_vars/all

# this is the standard text to put in templates
ansible_managed_file: "*** YAVDR: ANSIBLE MANAGED FILE ***"

PPAs

branch: unstable
ppa_owner: 'ppa:yavdr'
# a list of all package repositories to be added to the installation
repositories:
  - '{{ ppa_owner }}/main'
  - '{{ ppa_owner }}/unstable-main'
  - '{{ ppa_owner }}/{{branch}}-vdr'
  - '{{ ppa_owner }}/{{branch}}-yavdr'
  - '{{ ppa_owner }}/{{branch}}-kodi'

Drivers

drivers:
  sundtek: auto
  ddvb-dkms: auto

Media directories

# dictionary of directories for (shared) files. Automatically exported via NFS and Samba if those roles are enabled
media_dirs:
  audio: /srv/audio
  video: /srv/audio
  pictures: /srv/audio
  files: /srv/files

VDR user, directories, special configuration and plugins

# properties of the user vdr and vdr-related options
vdr:
  user: vdr
  group: vdr
  uid: 666
  gid: 666
  home: /var/lib/vdr
  recdir: /srv/vdr/video
  hide_first_recording_level: false
  safe_dirnames: true
  override_vdr_charset: false

# add the vdr plugins you want to install
vdr_plugins:
  - vdr-plugin-devstatus
  - vdr-plugin-markad
  - vdr-plugin-restfulapi
  - vdr-plugin-softhddevice

Samba

samba:
  workgroup: YAVDR

Additional packages

# additional packages you want to install
extra_packages:
  - vim
  - tree
  - w-scan
  - bpython3

System pre-configuration

#system:
#  shutdown: poweroff
#  grub:
#    timeout: 0
#    boot_options: quiet nosplash

Roles

yavdr-common

This role is used to set up a basic yaVDR installation. It creates the directories, installs the vdr and other useful packages.

default variables

This section is for reference only, please use the files in global_vars for customizations.

---
# file: roles/yavdr-common/defaults/main.yml

Repositories

You can set a list of package repositories which provide the necessary packages. Feel free to use own PPAs if you need special customization to the VDR and it's plugins.

branch: unstable
repositories:
  - 'ppa:yavdr/main'
  - 'ppa:yavdr/unstable-main'
  - 'ppa:yavdr/{{branch}}-vdr'
  - 'ppa:yavdr/{{branch}}-kodi'
  - 'ppa:yavdr/{{branch}}-yavdr'

Drivers

Automatically installed drivers can be very useful, but if you know you need a certain driver, you can simply set it's value to true. If you don't want a driver to be installed, set it's value to false.

drivers:
  sundtek: auto
  ddvb-dkms: auto

Additional Packages

Add additional packages you would like to have on your installation to this list

  extra_packages:
      - vim
      - tree
      - w-scan

VDR

This section allows you to set the recording directory, the user and group that runs the vdr and it's home directory.

user: the vdr user name
group: the main group for the user vdr
uid: the user id for the user vdr
gid: the group id for the group vdr
home: the home directory for the user vdr
recdir: the recording directory used by VDR
hide_first_recording_level: let vdr hide the first directory level of it's recording directory so the content of multiple directories is shown merged together
safe_dirnames: replace special characters which are not compatible with Windows file systems and Samba shares
override_vdr_charset: workaround for channels with weird EPG encodings, e.g. Sky

vdr:
    user: vdr
    group: vdr
    uid: 666
    gid: 666
    home: /var/lib/vdr
    recdir: /srv/vdr/video
    hide_first_recording_level: false
    safe_dirnames: true
    override_vdr_charset: false

tasks

yavdr-common executes the following tasks:

main.yml

Disable default installation of recommended packages

This task prevents apt to automatically install all recommended dependencies for packages:

- name: apt | prevent automatic installation of recommended packages
 template:
   src: templates/90-norecommends.j2
   dest: /etc/apt/apt.conf.d/90norecommends

Use bash instead of dash

- name: use bash instead of dash
  shell: |
    echo "set dash/sh false" | debconf-communicate
    dpkg-reconfigure -f noninteractive dash

Disable release-upgrade notifications

- name: disable release-upgrade notifications
  lineinfile:
    dest: /etc/update-manager/release-upgrades
    backrefs: yes
    state: present
    regexp: '^(Prompt=).*$'
    line: '\1never'

Setting up the package repositories

- name: add yaVDR PPAs
 apt_repository:
     repo: '{{ item }}'
     state: present
     update_cache: yes
 with_items: '{{ repositories }}'

- name: upgrade existing packages
 apt:
     upgrade: dist
     update_cache: yes

Installing essential packages

- name: apt | install basic packages
 apt:
   name: '{{ item }}'
   state: present
   install_recommends: no
 with_items:
   - anacron
   - at
   - bash-completion
   - biosdevname
   - linux-firmware
   - psmisc
   - python-kmodpy
   - python-usb
   - python3-usb
   - software-properties-common
   - ssh
   - ubuntu-drivers-common
   - wget
   - wpasupplicant
   - usbutils
   - xfsprogs

run local fact scripts

- name: get information about usb and pci hardware and loaded kernel modules
  hardware_facts:
    usb: True
    pci: True
    modules: True
    gpus: True
- debug:
    var: usb
    verbosity: 1
- debug:
    var: pci
    verbosity: 1
- debug:
    var: modules
    verbosity: 1
- debug:
    var: gpus
    verbosity: 1

- name: "detect SAT>IP Server on the network"
  action: satip_facts

- debug:
    var: satip_detected
    verbosity: 1

templates

{{ ansible_managed_file | comment('c') }}
// Recommends are as of now still abused in many packages
APT::Install-Recommends "0";
APT::Install-Suggests "0";

vdr

tasks

install the basic vdr packages

---
# file: roles/vdr/tasks/main.yml

- name: apt | install basic vdr packages
  apt:
    name: '{{ item }}'
    state: present
    install_recommends: no
  with_items:
    - vdr
    - vdrctl
    - vdr-plugin-dbus2vdr

Add svdrp/svdrp-disc to /etc/services

- name: add svdrp to /etc/services
  lineinfile:
    dest: /etc/services
    state: present
    line: "svdrp        6419/tcp"

- name: add svdrp-disc to /etc/services
  lineinfile:
    dest: /etc/services
    state: present
    line: "svdrp-disc       6419/udp"

Set up the recording directory for the vdr user

- name: create vdr recdir
  file:
    state: directory
    owner: '{{ vdr.user }}'
    group: '{{ vdr.group }}'
    mode: 0775
    dest: '{{ vdr.recdir }}'

- name: set option to use hide-first-recording-level patch
  blockinfile:
    dest: /etc/vdr/conf.d/04-vdr-hide-first-recordinglevel.conf
    create: true
    block: |
      [vdr]
      --hide-first-recording-level      
  when:
    vdr.hide_first_recording_level

- name: create local dir in recdir
  file:
    state: directory
    owner: '{{ vdr.user }}'
    group: '{{ vdr.group }}'
    mode: '0775'
    dest: '{{ vdr.recdir }}/local'
  when:
    vdr.hide_first_recording_level

Install additional vdr plugins

The additional plugins to install can be set in the variable {{vdr_plugins}} in the group variables

- name: install additional vdr plugins
  apt:
    name: '{{ item }}'
    state: present
    install_recommends: no
  with_items:
    '{{ vdr_plugins | default({}) }}'

Set up the directories for files in /srv

- name: create directories for media files
  file:
    state: directory
    owner: '{{ vdr.user }}'
    group: '{{ vdr.group }}'
    mode: 0777
    dest: '{{ item }}'
  with_items:
    - /srv/videos
    - /srv/music
    - /srv/picture
    - /srv/backups

STARTED yavdr-network

default variables

install_avahi: true
install_epgd: true
install_mariadb: true
install_nfs_client: true
install_nfs_server: true
install_samba_client: true
install_samba_server: true

tasks

---
# this playbook sets up network services for a yaVDR installation
#
- name: install network packages
  apt:
      name: '{{ item }}'
      state: present
      install_recommends: no
  with_items:
      - avahi-daemon
      - avahi-utils
      - biosdevname
      - ethtool
      - nfs-common
      - vdr-addon-avahi-linker
      - wakeonlan

# Does this really work? We need a way to check if an interface supports WOL - Python Skript?
# - name: check WOL capabilities of network interfaces
#   shell: 'ethtool {{ item }} | grep -Po "(?<=Supports\sWake-on:\s).*$"'
#   register: wol
#   with_items: '{% for interface in ansible_interfaces if interface != 'lo' and interface != 'bond0' %}'

STARTED nfs-server

tasks

- name: install and configure nfs-kernel-server
  apt:
      name: "{{ item }}"
      state: present
      install_recommends: no
  with_items:
      - nfs-kernel-server
  when:
      - '{{ install_nfs_server }}'

TODO yavdr-remote

default variables

tasks

templates

files

TODO automatic X-server configuration

detect connected display
read EDID from displays
create a xorg.conf for nvidia/intel/amd gpus

templates

# file: roles/yavdr-xorg/templates/vdr-xorg.conf
# {{ ansible_managed_file }}

[Unit]
After=x@vt7.service
Wants=x@vt7.service
BindsTo=x@vt7.service

#!/bin/bash
# {{ ansible_managed_file }}
exec openbox-session

env | grep "DISPLAY\|DBUS_SESSION_BUS_ADDRESS\|XDG_RUNTIME_DIR" > ~/.session-env
systemctl --user import-environment

files

yavdr-xorg

default variables

tasks

---
# file: roles/yavdr-xorg/tasks/main.yml

- name: install packages for xorg
  apt:
    name: '{{ item }}'
    state: present
  with_items:
    - xorg
    - xserver-xorg-video-all
    - xserver-xorg-input-all
    - xlogin
    - xterm
    #- yavdr-xorg
    - openbox

- name: create folders for user session
  file:
    state: directory
    dest: '{{ item }}'
    mode: '0775'
    owner: '{{ vdr.user }}'
    group: '{{ vdr.group }}'
  with_items:
    - '{{ vdr.home }}/.config/systemd/user'
    - '{{ vdr.home }}/.config/openbox/autostart'

### TODO: move to yavdr-xorg package? ###
- name: create folder for customizations of vdr.service
  file:
    state: directory
    dest: /etc/systemd/system/vdr.service.d
    mode: '0775'

- name: add dependency to X-server for vdr.service using a drop-in
  template:
    src: templates/vdr-xorg.conf
    dest: /etc/systemd/system/vdr.service.d/
### END TODO ###

- name: create .xinitrc for vdr user
  template:
      src: 'templates/.xinitrc.j2'
      dest: '/var/lib/vdr/.xinitrc'
      mode: 0755
      owner: '{{ vdr.user }}'
      group: '{{ vdr.group }}'

- name: populate autostart for openbox
  template:
      src: 'templates/autostart.j2'
      dest: '/var/lib/vdr/.config/openbox/autostart'
      mode: 0755
      owner: '{{ vdr.user }}'
      group: '{{ vdr.group }}'

- name: set a login shell for the vdr user
  user:
      name: '{{ vdr.user }}'
      shell: '/bin/bash'
      state: present
      uid: '{{ vdr.uid }}'
      groups: '{{ vdr.group }}'
      append: yes

- name: enable and start xlogin for the vdr user
  systemd:
    daemon_reload: yes
    name: 'xlogin@{{ vdr.user }}'
    enabled: yes
    state: started

samba-install

tasks

# file: roles/samba-install/tasks/main.yml

- name: install samba server
  apt:
    name: '{{ item }}'
    state: present
    install_recommends: no
  with_items:
    - samba
    - samba-common
    - samba-common-bin
    - tdb-tools

samba-config

tasks

# file: roles/samba-config/tasks/main.yml

# TODO:
#- name: divert original smbd.conf

- name: create smb.conf.custom
  file:
    state: touch
    dest: '/etc/samba/smb.conf.custom'
  notify: [ 'Restart Samba' ]
    
- name: expand template for smb.conf
  template:
    src: 'templates/smb.conf.j2'
    dest: '/etc/samba/smb.conf'
    #validate: 'testparm -s %s'
  notify: [ 'Restart Samba' ]

templates

# {{ ansible_managed_file }}

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = {{ samba.workgroup }}

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped 
# to anonymous connections
   map to guest = bad user

{% for name, path in media_dirs.iteritems() %}
[{{ name }}]
   path = {{ path }}
   comment = {{ name }} on %h
   browseable = yes
   guest ok = yes
   writeable = yes
   browseable = yes
   create mode = 0664
   directory mode = 0775
   force user = {{ vdr.user }}
   force group = {{ vdr.group }}
   follow symlinks = yes
   wide links = yes

{% endfor %}

include = /etc/samba/smb.conf.custom

grub-config

default variables

system:
  shutdown: poweroff
  grub:
    timeout: 0
    boot_options: quiet nosplash

tasks

- name: custom grub configuration for timeout and reboot halt
  template:
    src: templates/50_custom.j2
    dest: /etc/grub.d/50_custom
    mode: '0775'
  notify: [ 'Update GRUB' ]

# TODO: add special case if plymouth is used
- name: let the system boot quietly
  lineinfile:
      dest: /etc/default/grub
      state: present
      regexp: '^(GRUB_CMDLINE_LINUX_DEFAULT=")'
      line: '\1{{ system.grub.boot_options}}"'
      backrefs: yes
  notify: [ 'Update GRUB' ]

templates

#!/bin/sh
exec tail -n +3 $0

# This file is configured by the ansible configuration for yaVDR

{% if system.shutdown is defined and system.shutdown == 'reboot' %}
menuentry "PowerOff" {
    halt
}
{% endif %}

if [ "${recordfail}" = 1 ]; then
    set timeout={{ 3 if system.grub.timeout < 3 else system.grub.timeout }}
else
    set timeout={{ system.grub.timeout if system.grub.timeout is defined else 0 }}
fi

handlers

- name: Update GRUB
  command: update-grub
  failed_when: ('error' in grub_register_update.stderr)
  register: grub_register_update

  # TODO: Do we need to use grub-set-default?
  # https://github.com/yavdr/yavdr-utils/blob/master/events/actions/update-grub

TODO autoinstall-drivers

sundtek

autoinstall-satip

tasks

---
# file roles/autoinstall-satip/tasks/main.yml

- name: apt | install vdr-plugin-satip if a Sat>IP server has been detected
  apt:
    name: vdr-plugin-satip
  when: satip_detected

autoinstall-targavfd

tasks

---
# file roles/autoinstall-targavfd/tasks/main.yml

- name: apt | install vdr-plugin-targavfd if connected
  apt:
    name: vdr-plugin-targavfd
  when: 
    - '"19c2:6a11" in usb'

autoinstall-imonlcd

tasks

---
# file roles/autoinstall-imonlcd/tasks/main.yml

- name: apt | install vdr-plugin-imonlcd if connected
  apt:
    name: vdr-plugin-imonlcd
  when: 
    - '"15c2:0038" in usb'
    - '"15c2:ffdc" in usb'

autoinstall-libcecdaemon

tasks

---
# file roles/autoinstall-libcec-daemon/tasks/main.yml

- name: apt | install libcec-daemon if connected
  apt:
    name: libcec-daemon
  when: 
    - '"2548:1002" in usb'

autoinstall-pvr350

tasks

---
# file roles/autoinstall-pvr350/tasks/main.yml

- name: apt | install vdr-plugin-pvr350 if connected
  apt:
    name: vdr-plugin-pvr350
  when: 
    - '19c2:6a11" in pci'

TODO autoinstall-dvbhddevice

Problem: woher kommt der Treiber (AFAIK noch nicht im Kernel)? Die Firmware sollte in yavdr-firmware stecken

tasks

---
# file roles/autoinstall-dvbhddevice/tasks/main.yml

- name: apt | install vdr-plugin-dvbhddevice if connected
  apt:
    name: vdr-plugin-dvbhddevice
  when: 
    - '"13c2:300a" in pci'
    - '"13c2:300b" in pci'

autoinstall-dvbsddevice

tasks

---
# file roles/autoinstall-dvbsddevice/tasks/main.yml

- name: apt | install vdr-plugin-dvbsddevice if module is loaded
  apt:
    name: vdr-plugin-dvbsddevice
  when: 
    - '19c2:6a11" in modules'

TODO autoinstall-plugins

sddevice

hddevice

pvr350

template-test

---
- name: show vars
  debug: 
    var: '{{ system }}'

- name: test templates
  template:
    src: templates/test.j2
    dest: /tmp/test.txt

{{ ansible_managed_file | comment }}

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    {% if system.x11.dualhead.enabled %}
    Screen      1  "Screen1" RightOf "Screen0"
    {% endif %}
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection


Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection


Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
{% if system.x11.display.0.default == "VGA2Scart_4_3" or system.x11.display.0.default == "VGA2Scart_16_9" %}
    HorizSync       14-17
    VertRefresh     49-61
    {% if system.x11.display.0.default == "VGA2Scart_4_3" %}
    Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace
    {% elif system.x11.display.0.default == "VGA2Scart_16_9" %}
    Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace
    {% endif %}
{% endif %}
    Option         "DPMS"
    Option         "ExactModeTimingsDVI" "True"
EndSection


{% if system.x11.dualhead.enabled == "1" %}
Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Unknown"
{% if system.x11.display.1.default in ("VGA2Scart_4_3",  "VGA2Scart_16_9") %}
    HorizSync       14-17
    VertRefresh     49-61
    {% if system.x11.display.1.default == "VGA2Scart_4_3" %}
    Modeline "VGA2Scart_4_3" 13.875 720 744 808 888 576 580 585 625 -HSync -Vsync interlace
    {% elif system.x11.display.1.default == "VGA2Scart_16_9" %}
    Modeline "VGA2Scart_16_9" 19 1024 1032 1120 1216 576 581 586 625 -Hsync -Vsync interlace
    {% endif %}
    Option         "DPMS"
    Option         "ExactModeTimingsDVI" "True"
{% endif %}
EndSection
{% endif %}

Section "Device"
    Identifier     "Device0"
{% if system.hardware.nvidia.detected %}
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
{% endif %}
    Screen          0
    Option         "DPI" "100x100"
{% if system.hardware.nvidia.busid %}
    BusID          "PCI: {{ system.hardware.nvidia.busid }}"
{% endif %}
    Option         "NoLogo" "True"
    Option         "UseEvents" "True"
    Option         "TripleBuffer" "False"
    Option         "AddARGBGLXVisuals" "True"
    Option         "TwinView" "0"
    Option         "DynamicTwinView" "0"
    Option         "OnDemandVBlankinterrupts" "on"
    Option         "FlatPanelProperties" "Scaling = Native"
EndSection

{% if system.x11.dualhead.enabled == "1" %}
Section "Device"
    Identifier     "Device1"
    {% if system.hardware.nvidia.detected %}
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    {% endif %}
    Screen          1
    {% if system.hardware.nvidia.busid %}
    BusID          "PCI: {{ system.hardware.nvidia.busid }}"
    {% endif %}
    Option         "NoLogo" "True"
    Option         "UseEvents" "True"
    Option         "TripleBuffer" "False"
    Option         "AddARGBGLXVisuals" "True"
    Option         "TwinView" "0"
    Option         "DynamicTwinView" "0"
EndSection
{% endif %}


Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
{% if system.x11.display.0.default is defined and system.x11.display.0.default %}
        Modes      "{{ system.x11.display.0.default }}"{% for mode in system.x11.display.0.mode %}{% if mode != system.x11.display.0.default %} "{{ mode }}"{% endif %}{% endfor %}

{% elif system.hardware.nvidia.detected == 1 %}
        Modes      "nvidia-auto-select"
{% endif %}
    EndSubSection
{% if system.x11.display.0.default or system.x11.default %}
#     Option         "ConnectedMonitor" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?><?cs if:(?system.x11.dualhead.enabled && system.x11.dualhead.enabled == 1) ?>, <?cs call:fix_display_name(system.x11.display.1.device) ?><?cs /if ?>"
#     Option         "UseDisplayDevice" "<?cs if:(?system.x11.display.0.device) ?><?cs call:fix_display_name(system.x11.display.0.device) ?><?cs else ?><?cs var:system.x11.default ?><?cs /if ?>"
# <?cs /if ?>
# <?cs if:(?system.hardware.nvidia.0.edid && system.hardware.nvidia.0.edid == "1") ?>
#     Option         "CustomEDID" "<?cs call:fix_display_name(system.x11.display.0.device) ?>:/etc/X11/edid.0.yavdr"
# <?cs /if ?>
# <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.0.device) ?>
#     Option          "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:system.x11.display.0.default ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }"
# <?cs each:mode = system.x11.display.0.mode ?><?cs if:(mode != system.x11.display.0.default) ?>
#     Option          "MetaModes" "<?cs call:fix_display_name(system.x11.display.0.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.0.viewport.in.x ?>x<?cs var:system.x11.display.0.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.0.viewport.out.x ?>x<?cs var:system.x11.display.0.viewport.out.y ?>+<?cs var:system.x11.display.0.viewport.out.plusx ?>+<?cs var:system.x11.display.0.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?> 
{% endif %}
EndSection

{% if system.x11.dualhead.enabled == "1" %}
Section "Screen"

     Identifier     "Screen1"
     Device         "Device1"
     Monitor        "Monitor1"
     DefaultDepth    24
     SubSection     "Display"
         Depth       24
{% if system.x11.display.0.default is defined and system.x11.display.0.default %}
         Modes      "{{ system.x11.display.1.default }}"{% for mode in system.x11.display.1.mode %}{% if mode != system.x11.display.1.default %} "{{ mode }}"{% endif %}{% endfor %}

{% elif system.hardware.nvidia.detected == "1" %}
         Modes      "nvidia-auto-select"
{% endif %}
      EndSubSection

# <?cs if:(?system.x11.display.1.default && system.x11.display.1.default != "" && system.x11.display.1.default != "disabled") ?>
#     Option         "UseDisplayDevice" "<?cs call:fix_display_name(system.x11.display.1.device) ?>"
# <?cs /if ?>
# <?cs if:(?system.hardware.nvidia.1.edid && system.hardware.nvidia.1.edid == "1") ?>
#     Option         "CustomEDID" "<?cs call:fix_display_name(system.x11.display.1.device) ?>:/etc/X11/edid.1.yavdr"
# <?cs /if ?>
# <?cs if:(system.hardware.nvidia.detected == 1 && ?system.x11.display.1.device) ?>
#     Option          "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:system.x11.display.1.default ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }"
# <?cs each:mode = system.x11.display.1.mode ?><?cs if:(mode != system.x11.display.1.default) ?>
#     Option          "MetaModes" "<?cs call:fix_display_name(system.x11.display.1.device) ?>: <?cs var:mode ?> { ViewPortIn=<?cs var:system.x11.display.1.viewport.in.x ?>x<?cs var:system.x11.display.1.viewport.in.y ?>, ViewPortOut=<?cs var:system.x11.display.1.viewport.out.x ?>x<?cs var:system.x11.display.1.viewport.out.y ?>+<?cs var:system.x11.display.1.viewport.out.plusx ?>+<?cs var:system.x11.display.1.viewport.out.plusy ?> }"<?cs /if ?><?cs /each ?>
# <?cs /if ?>
EndSection
{% endif %}

Section "Extensions"
# if no open-gl OSD is needed (e.g. for vdr-sxfe):
    Option         "Composite" "Disable"
EndSection

foo:
  - bar
  - baz
  - spam

system:
  hardware:
    nvidia:
      detected: "1"
      busid: "000:2304:234"
  x11:
    dualhead:
      enabled: "0"
    display:
      0:
        mode:
          - "1920x1080_50"
        default: "nvidia-auto"

      1:
        mode:
          - "1280x720_60"

Modules

This section contains custom modules for the yaVDR Playbooks. They are used to collect facts about the system and configure applications and daemons.

hardware_facts.py

#!/usr/bin/env python

# This Module collects the vendor- and device ids for USB- and PCI(e)-devices and currently loaded kernel modules.
DOCUMENTATION = '''
---
module: hardware_facts
short_description: collects facts for kernel modules, usb and pci devices
description:
     - This Module collects the vendor- and device ids for USB- and PCI(e)-devices and
       currently loaded kernel modules.
options:
    usb:
        required: False
        default: True
        description:
          - return a list of vendor- and device ids for usb devices in '04x:04x' notation

    pci:
        required: False
        default: True
        description:
          - return a list of vendor- and device ids for pci devices in '04x:04x' notation

    modules:
        required: False
        default: True
        description:
          - return a list of currently loaded kernel modules

    gpus:
        required: False
        default: True
        description:
          - return a list of devices of the pci gpu class (0x030000)
notes:
   - requres python-pyusb and python-kmodpy
requirements: [ ]
author: "Alexander Grothe <seahawk1986@gmx.de>"
'''

EXAMPLES = '''
- name: get information about usb and pci hardware and loaded kernel modules
  hardware_facts:
    usb: True
    pci: True
    modules: True
- debug:
    var: usb
- debug
    var: pci
- debug
    var: modules
- debug
    var: gpus
'''

import glob
import json
import os
import sys
import usb.core
from collections import namedtuple

import kmodpy
from ansible.module_utils.basic import *


PCIDevice = namedtuple("PCIDevice", ['idVendor', 'idProduct', 'idClass'])

def get_pci_devices():
    for device in glob.glob('/sys/devices/pci*/*:*:*/'):
        with open(os.path.join(device, 'device')) as d:
            product_id = int(d.read().strip(), 16)
        with open(os.path.join(device, 'vendor')) as d:
            vendor_id = int(d.read().strip(), 16)
        with open(os.path.join(device, 'class')) as d:
            class_id = int(d.read().strip(), 16)
        yield PCIDevice(idVendor=vendor_id, idProduct=product_id, idClass=class_id)

def format_device_list(iterator):
    return ["{:04x}:{:04x}".format(d.idVendor, d.idProduct) for d in iterator]

def format_gpu_device_list(iterator):
    def get_entries(iterator):
        for d in iterator:
            if d.idClass == 0x030000:
                yield ("{:04x}:{:04x}".format(d.idVendor, d.idProduct))
    return [entry for entry in get_entries(iterator)]

arg_specs = {
    'usb': dict(default=True, type='bool', required=False),
    'pci': dict(default=True, type='bool', required=False),
    'modules': dict(default=True, type='bool', required=False),
    'gpus': dict(default=True, type='bool', required=False),
    }


def main():
    module = AnsibleModule(argument_spec=arg_specs, supports_check_mode=True,)
    collect_usb = module.params['usb']
    collect_pci = module.params['pci']
    collect_modules = module.params['modules']
    collect_gpus = module.params['gpus']
    if collect_usb:
        usb_devices = format_device_list(usb.core.find(find_all=True))
    else:
        usb_device = []
    if collect_pci:
        pci_devices = format_device_list(get_pci_devices())
    else:
        pci_devices = []
    if collect_modules:
        k = kmodpy.Kmod()
        modules = [m[0] for m in k.loaded()]
    else:
        modules = []
    if collect_gpus:
        gpus = format_gpu_device_list(get_pci_devices())
    else:
        gpus = []
    data = {'usb': usb_devices, 'pci': pci_devices, 'modules': modules, 'gpus': gpus}
    module.exit_json(changed=False, ansible_facts=data, msg=data)


if __name__ == '__main__':  
    main()

satip_facts.py

#!/usr/bin/env python2

DOCUMENTATION = '''
---
module: hardware_facts
short_description: "check if at least one SAT>IP server responds on the network"
description:
     - This script sends a multicast message and awaits responses by Sat>IP servers.
       Returns the boolean variable 'satip_detected'
'''
EXAMPLES = '''
- name: "detect SAT>IP Server on the network"
  action: satip_facts

- debug:
    var: satip_detected
'''

import json
import socket
import sys
import time

from ansible.module_utils.basic import *

SSDP_ADDR = "239.255.255.250"
SSDP_PORT = 1900
# SSDP_MX = max delay for server response
# a value of 2s is recommended by the SAT>IP specification 1.2.2
SSDP_MX = 2
SSDP_ST = "urn:ses-com:device:SatIPServer:1"

ssdpRequest = "\r\n".join((
    "M-SEARCH * HTTP/1.1",
    "HOST: %s:%d" % (SSDP_ADDR, SSDP_PORT),
    "MAN: \"ssdp:discover\"",
    "MX: %d" % (SSDP_MX),
    "ST: %s" % (SSDP_ST),
    "\r\n"))

def main():
    module = AnsibleModule(argument_spec={}, supports_check_mode=True,)
    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    # according to Sat>IP Specification 1.2.2, p. 20
    # a client should send three requests within 100 ms with a ttl of 2
    sock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 2)
    sock.settimeout(SSDP_MX + 0.5)
    for _ in range(3):
        sock.sendto(ssdpRequest, (SSDP_ADDR, SSDP_PORT))
        time.sleep(0.03)
    try:
        response = sock.recv(1000)
        if response and "SERVER:" in response:
            got_response = True
        else:
            raise ValueError('No satip server detected')
    except (socket.timeout, ValueError):
        got_response = False

    module.exit_json(changed=False, ansible_facts={'satip_detected': got_response})

if __name__ == '__main__':  
    main()

Handlers

- name: Restart Samba
  systemd:
    name: smbd.service
    state: restarted
    enabled: yes
    #masked: no
  register: samba_reload

39 KiB Raw Blame History

Installing and configuring yaVDR with Ansible

Playbooks

yavdr07.yml

yavdr07-headless.yml

Hosts

Group Variables

default text for templates

PPAs

Drivers

Media directories

VDR user, directories, special configuration and plugins

Samba

Additional packages

System pre-configuration

Roles

yavdr-common

default variables

Repositories

Drivers

Additional Packages

VDR

tasks

main.yml

Disable default installation of recommended packages

Use bash instead of dash

Disable release-upgrade notifications

Setting up the package repositories

Installing essential packages

run local fact scripts

templates

vdr

tasks

install the basic vdr packages

Add svdrp/svdrp-disc to /etc/services

Set up the recording directory for the vdr user

Install additional vdr plugins

Set up the directories for files in /srv

STARTED yavdr-network

default variables

tasks

STARTED nfs-server

tasks

TODO yavdr-remote

default variables

tasks

templates

files

TODO automatic X-server configuration

templates

files

yavdr-xorg

default variables

tasks

samba-install

tasks

samba-config

tasks

templates

grub-config

default variables

tasks

templates

handlers

TODO autoinstall-drivers

sundtek

autoinstall-satip

tasks

autoinstall-targavfd

tasks

autoinstall-imonlcd

tasks

autoinstall-libcecdaemon

tasks

autoinstall-pvr350

tasks

TODO autoinstall-dvbhddevice

tasks

autoinstall-dvbsddevice

tasks

39 KiB

Raw Blame History