Pierre Seznec
2445fdea1f
avoid print error when using setmod with modc gen 1 cards
2018-07-12 15:41:13 +02:00
Pierre Seznec
5a4d24725a
Use the absolute output power gain (refs #7651 )
2018-07-12 15:41:13 +02:00
Frederic Cand
a9f1cb3e5a
Set port_num to software limit for modulators ( fixes #8118 )
2018-07-12 15:41:13 +02:00
Richard Bérichon
0d9752284e
Make setmod tool configurable
2018-07-12 15:41:13 +02:00
Florent Audebert
cb4834cca0
Ensure CAM stability after reset
...
Wait 2 secs in low level CI reset function as some CAMs become crazy
if we talk to them just after the reset (SmarDTV / TDT Premium).
2018-07-12 15:41:13 +02:00
Florent Audebert
3c05e73692
Don't stop demod when issuing DiSEqC or Tone Burst commands
...
This may prevent locking depending on which order are called tuning
and DiSEqC commands.
Here are comments from Ralph (Digital Devices):
The macro stops the demod, because a sudden loss of signal, like
you get when switching inputs with diseqc command, can cause the
TS output section in the stv0900 to lose packets on the other demod.
But this does not happen very often (see errrata of stv0900).
I guess it depends on in what order you use diseqc and tuning that it
could cause trouble.
2018-07-12 15:40:38 +02:00
Florent Audebert
b53ad2c450
Enhance signal strength reporting for DVB-S1/S2 modules
...
Updated RF lookup table with fine grained values for better
precision. Listing has been made using a Dektec DTA-107 as source
and Promax TV Explorer for measurements.
2018-07-12 15:40:19 +02:00
Florent Audebert
5ae225b1f6
Reserve 4 adapter numbers for each DVB-C modulators
...
In order to determine on which tab/port modules are plugged, udev
relies on adapter numbers which must remain multiple of 4.
2018-07-12 15:40:11 +02:00
Florent Audebert
53dc0b8905
Increase MAX_DVB_MINORS to 400 in order to handle up to 40 DVB-C/T modules
...
Each CI module require 2 minor nodes, each DVB-S2 8 and each DVB-C/T
10. Considering we can put 40 modules in a Flamingo-XL chassis, it means
we may need up to 400 minor nodes for 40 DVB-C/T modules.
2018-07-12 15:39:44 +02:00
Frederic Cand
3d63c494d4
Revert "block opening of ci device with O_RDWR"
...
This reverts commit e2145682e2
2018-07-12 15:37:23 +02:00
Hugues Hiegel
8e25b218ad
Factorize Makefiles rules
2018-07-12 15:36:00 +02:00
Ralph Metzler
f570b2e071
add more frontend statistics
2018-06-29 12:48:12 +02:00
Ralph Metzler
32f46389be
adjust to latest MCI upstream drivers
2018-06-23 16:52:22 +02:00
Ralph Metzler
4b68bcad91
add MaxM4 ID
2018-06-23 16:47:10 +02:00
Ralph Metzler
1ad4dfacd1
remove leftover smp_load_acquire() for older kernels
2018-06-23 16:46:00 +02:00
Ralph Metzler
f7772c7a88
allow fmode 4
2018-06-23 16:44:16 +02:00
Ralph Metzler
6219e19ece
add support for MaxM4
2018-06-23 16:43:29 +02:00
Ralph Metzler
192a4ad20d
add wrappers to pacify Sparse
2018-05-28 16:41:11 +02:00
Ralph Metzler
e13cec82e4
Return correct frequency
...
Signed-off-by: Julian Scheel <julian@jusst.de >
2018-05-28 16:40:43 +02:00
Ralph Metzler
d13416157c
remove unused offs
2018-05-28 16:40:02 +02:00
Ralph Metzler
755f502602
set array size to 4
2018-05-28 16:39:42 +02:00
Ralph Metzler
a05d1852a3
Set modulation to QPSK for DVB-S
...
Signed-off-by: Julian Scheel <julian@jusst.de >
2018-05-28 16:39:21 +02:00
Ralph Metzler
1e15f5474d
add templX for sensors on GT link cards
2018-05-25 23:05:26 +02:00
Ralph Metzler
9c1fc648dc
stop frontend on sleep and input changes
2018-05-25 23:04:25 +02:00
Ralph Metzler
2e5056c4a1
add temperature attribute for MCI cards
2018-05-25 00:12:31 +02:00
Ralph Metzler
1b89edb4b1
missing parts of previous patch
2018-05-25 00:11:03 +02:00
Ralph Metzler
875a768266
properly support frontend input switching for MAX SX8
2018-05-25 00:09:50 +02:00
Ralph Metzler
09c068c74c
remove wrong strength conversion
2018-05-25 00:08:27 +02:00
Ralph Metzler
c471123f17
style cleanup
2018-05-24 11:04:59 +02:00
Ralph Metzler
8dbd33fd82
- make 8PSK/QPSK default (for AUTO mode)
...
- when selecting modulation, also enable all lower modulations
2018-05-24 11:03:45 +02:00
Ralph Metzler
a978e9455f
disable automatic code search
2018-05-18 14:47:19 +02:00
Ralph Metzler
9d8c7d4a63
- separate MCI and SX8 code
...
- move SX8 code to ddbridge-sx8.c
- adjust SX8 code to latest version from upstream
- add file with skeleton driver for M4
2018-05-15 23:01:39 +02:00
Ralph Metzler
81ed8fed9d
change first MCI id value and use seperate ids for each type of MCI card
2018-05-14 04:30:58 +02:00
Ralph Metzler
f24a329f2f
remove debug message
2018-05-14 04:27:55 +02:00
Ralph Metzler
5d7f4fcbe8
simplify link structure access
2018-05-14 04:26:51 +02:00
Ralph Metzler
6243397d99
add Octonet Pro
2018-05-14 04:08:21 +02:00
Ralph Metzler
5b86ac7627
limit link to 0-3
2018-05-02 15:45:00 +02:00
Ralph Metzler
c831ccfc9e
add check for minimum FPGA firmware version
2018-05-02 15:39:09 +02:00
Ralph Metzler
cad161f939
enable net interface by default
2018-05-02 15:35:28 +02:00
Ralph Metzler
67257ce132
replace mdio_num with mdio_base
2018-04-11 21:20:25 +02:00
Ralph Metzler
bdea58c1b2
replace direct register based mdio with ioctl
2018-04-11 21:18:00 +02:00
Ralph Metzler
29eda9be8e
add missing paranthesis
2018-04-09 14:42:39 +02:00
Ralph Metzler
2c3c9bdf08
comment out old debugging messages
...
can be removed soon
2018-04-07 20:21:58 +02:00
Ralph Metzler
2693c181bc
new Octopus Net Pro flash layout
2018-04-07 20:21:15 +02:00
Ralph Metzler
53464162de
detect LNBH address to prevent error message in driver
2018-04-07 20:17:38 +02:00
Ralph Metzler
8cbb835de0
add general make rule
2018-04-07 20:16:32 +02:00
Ralph Metzler
d0f7b9be1f
uncomment send_burst for legacy hardware and replace some register setting
...
functions with new version.
2018-03-28 19:47:26 +02:00
Ralph Metzler
6b0feea253
add ULL
2018-03-28 19:46:31 +02:00
Ralph Metzler
bed4be534a
add cast
2018-03-28 19:44:15 +02:00
Ralph Metzler
1d7d8bc413
report I2C bus errors
2018-03-28 19:43:04 +02:00
