* implement rigin for efx
* implement origin for effects and other components
add experimental adalight firmware for arduino with upto 5 pwm channels
* cleanup
* origin ip now with dns lookup
* fix compile
* move some code
* fix/refactor backlight stuff:
- fix colors dont turn of when backlight 0 and black is set
- add option to use not colored backlight
- fix colored backlight not colored on very low color values
- various code style tunings
* apply needed change to wizard
* backlight disabled on static color and efects
* fix warnings
* try fix udp compiler warnings
* implement 404 for webserver - this is a quick hack, should be refactored later
* add http error pages ... design is more a placebo ;-)
* tune errorpages
fix some cgi related stuff, now only python is possible
executing and reading python file is possilbe, but it cannot receive any data from webui
* fix typo
* fix another typo
* - fix coloradjustment via hyperion remote
- several small cleanups/refactorings
* fix color is shown as unknown in json serverinfo
* fix active color is not shown when autoselect is reactivated
* add new rgbtransform
* activate rgbtransform
* integrate new transform and gamma in adjustment, disable transform
* fix brighness limit
* advance upper and lower thresholds
* start removing color transform
* adjust configs/schema
* implement json for new color adjustment
* finish hyperion-remote extension for new adjustment settings
* fix typos
* rename luminance to brightness
fix jsonapi for new adjustment
* fix some bugs in adjustments
* fix i18n
* fix gamma via json
* now brighness values goes from 0-1 with 0.5 is the default for all brighness is equal between the channels. less 0.5 all channels scaled down
to new brighness, above 0.5 if possible channel gets brighter - but brighness is not equal between the channels anymore
brighness value curve is now exponential instead of linear - this feels more natural
* hslv cleanup
* Rename test to test123
* Delete test123
* New color Ajustment
Trilinear interpolation between the 8 corners of the color cube (black, red, green, blue, cyan, magenta, yellow, white)
* Renaming
* overloading getadjustmentX()
* Renaming
* Additional renaming
* Added more RgbChannel
* Added more colors to channelAdjustment
* Added additional colors
* Added additional colors
* Added additional colors
* Added additional color adjustments
* Update MultiColorAdjustment.cpp
* Fixed black adjustment
* Color config in array form
* on v4l screenshot, print out nosignal threshold values
* separate fractional parameters for no signal detection
* fully implement handling for "rainbow grabber"
* - implement a global logbuffer
- providerrs232 reduce log spam
* logger add signal and start json push
* implement logger notifier ... need some cleanup
* imlement logview in webui - the layout stuff is basic atm and needs some tuning
* - implement a global logbuffer
- providerrs232 reduce log spam
* logger add signal and start json push
* implement logger notifier ... need some cleanup
* - remove feature of using multiple config files for automaticly start other hyperion instances
- add auto config file creation
- tune service files
* add auto path creation for initial default config
* debian package:
rename service to hyperiond
remove copy of config file
* remove color temperatire, its the same as color adjustment
* remove temperature from schema
* implement most part of v4l only colro settings,
now hyperion update knows from which component the colors come
* update configs
* fix webui config write
* reomve correction and temperature from hyperion-remote
* switch rs232 provider to completly async transfer
* start of implementing a seperate init function for leddevices
* rename setconfig to init
* more fixes
* implement missing code
* fix code style
* remove debug code
* remove debug stuff
* set loglevel to original state
* first try
* implement hyperion restart. core function is good, but needs a beeter structuring- something for next refactoring session ;-)
* several fixes (including osx)
merge with upstream
some refactoring
* add some eye candy to webui
* split content and js
tune leds config
* implement connection lost page
* split js/html in huebridge
* add js action for connection lost
* extend led config
make connection loss nicer
* tune led code
add menu entry for grabber
* more tuning of webui
* switch back to botstrap textarea
add v4l to components
* add icon
* extend schema for jsoneditor
* implement ledcolors streaming with 4fps
* implement component state
* make hyperion websocket api event based
* implement new websocket handling for generalconf
* migrate all webui stuff to new event based websocket api
some cleanup ... now all html templates are in content
refactoring of web stuff
* add hyperionport to global
start impl. removing advanced key
* separate dashboard
serverinfo is updated every 3 seconds automatily
add input selection
cleanup and remove not needed stuff
* prepare infrastructure for server sided file execution
* webui minor fixes
* fix compile
* Remove "endOfJson" Value
Deprecated value from Hypercon
* Remove "endOfJson" Value
Deprecated value from Hypercon
* Add writeJson function to JsonFactory
* ability to ignore required value in schema file
* Remove "endOfJson" Value
* Add handleConfigSetCommand function
* Add handleConfigSetCommand function
* Update JsonSchemas.qrc
* Update schema.json
* Update JsonSchemaChecker.cpp
* Add configSet command to Hyperion-remote
* Add setConfigFile function
* Add setConfigFile function
* Add schema-configset.json
* implement enable/disable on runtime for:
- smoothing
- kodi
- udplistener
- boblight
* implement enable/disable for forwarder
refactor component
* - implement grabber enable/disable at runtime
- big grabber refactoring. now with common base class for all grabbers
* implement enable/disable at runtime for bb detector
* osx fix
* try to fix cutted travis output for osx build
* common ledbuffer for color transform
hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer
other fixes:
fix compile bug in profiler
update doxygen config
* migrate logging for color transform classes
* prepare new logger in hyperion class
* implement hwledcount
* Update Hyperion.cpp
Fix off color
* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature
* remove colorcorrection completly
fix compile
* set colororder back to static
* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
* refactoring of RgbChannelAdjustment
* - remove rgbchannelcorrection, this was a dup of rgbchanneladjustment
- add cmake policy to hide warning
- tune code of rgbchanneltransform
* common ledbuffer for color transform
hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer
other fixes:
fix compile bug in profiler
update doxygen config
* migrate logging for color transform classes
* prepare new logger in hyperion class
* implement hwledcount
* Update Hyperion.cpp
Fix off color
* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature
* remove colorcorrection completly
fix compile
* set colororder back to static
* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
* refactoring of RgbChannelAdjustment
* common ledbuffer for color transform
hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer
other fixes:
fix compile bug in profiler
update doxygen config
* migrate logging for color transform classes
* prepare new logger in hyperion class
* implement hwledcount
* Update Hyperion.cpp
Fix off color
* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature
* remove colorcorrection completly
fix compile
* set colororder back to static
* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
* start step by step migration to new logger
* fix linking for serialport
* migrate effectengine to new logger
* tune log messages
* add commandline options for hyperiond to control verbosity
--silent
--verbose
--debug
* implement make install
set CMAKE_INSTALL_PREFIX e.g. to /opt to install to /opt/hyperion
set ENABLE_SYSTEM_INSTALL to ON to activate installation
after compiling use
make install
or
make install/strip
(for performance/size optimized binaries - compile in Release to get best performance)
* cleanup cmake files
use
cmake -DINSTALL_PREFIX=/opt/hyperion ..
to install all files to hyperion or
cmake -DINSTALL_PREFIX=/usr/
to install to usr. install folders are linux standard. bin go to bin folder and additionals (effects) go to share/hyperion
* add uninstall target - be patient with that, this will remove files from your system
install service files to share/hyperion - if you want to use them you have to make a symlink to your location of service files
* optimize build release script
install service files into hyperion share folder (services not activated, this must be done by distribution package script)
initial support of cmake option -DPLATFORM= option. This selects platform specific cmake flags. no need for -DENABLE_... options (unless you want some special things)
automatic detect for apple build
* update submodule
* fix cmake error when no platform is given
* initial support for deb,rpm and tgz packages - no usefull content atm!
* make packeages contain usefull stuff
* add license
make packes more functional. package specific install missing yet
* implement debian postinstall
* disable rpm generation until it has a working state
* add hypercon compat
* add posibility for multiple config files. first one found is taken
* remove hyperion comaptlayer
services is not started automaticly
* rework debian postinstall:
- remove /opt compatibility complety. This makes more trouble as it is usefull
- when hyperiond already started, restart it
- cleanup
* add deb package dependencies
* wipe out last support for /opt installation
* change default effect path in config to /usr
* revert service files and config files
* remove last occurences of ENABLE_PROTOBUF
fix cmake warnings and make it ready for cmake 3
fix refactoring of hyperiond.cpp creates no objects for network services
* all arguments via reference ...
* fix xbmcchecker not working
* add logger class
* - profiler must be activated with ENABLE_PROFILER, otherwise an error will raise
-> this should prevent profiler gets into release code
* fix profiler
Former-commit-id: b716dd40dbf5b837356eec876d85ec71c86d5c6c
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config
Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process
* reversing errant change to hyperion.systemd.sh
* adding support for SK6812 - not working yet
* Changed rpi_ws281x submodule to be penfold42's fork
* Set White to zero for now
* starting on the code to make the White led do stuff
* Added some basic whie led calculation
white = min(r,g,b)
r-=w, g-=w, b-=w
* cleaned up a couple of compiler warnings
* updated strip type to use corrected RGBW strip type
(the SK6812RGBW datasheet is wrong)
* moved bitpair_to_byte initialiser to (hopefully) work with older GCC
* compiler warning in udp driver
removed some tabs in ws2812b.cpp
* formatting - spaces to tabs
* moved rpi_281x to tag sk6812-v1.0
* attempt #3 at migrating the rpi_281x submodule to my fork/branch
* moving to my fork of rpi_281x
* Started implementing multiple RGB to RGBW conversion options
a quick hack has been implemented inside WS281x.cpp but ive started
moving this to RgbToRgbw.cpp for reuse by other led device types
* migrated RGB to RGBW conversion to RgbToRgbw.cpp
Former-commit-id: ff8e9038c4bb8203b71b42d12bf23be4abcc0b3b
redPanther
Paulchen Panther
Robin Kobus
redpanther
brindosch
penfold42
AEtHeLsYn
T.van der Zwan
Gamadril
poljvd