* Handle Exceptions in main & Pythoninit
* Have SSDPDiscover generic again
* Have SSDPDiscover generic again
* Change Info- to Debug logs as technical service messages
* Nanoleaf - When switched on, ensure UDP mode
* Include SQL Database in Cross-Compile instructions
* Fix Clazy (QT code checker) and clang Warnings
* Stop LedDevice:write for disabled device
* Nanoleaf: Fix uint printfs
* NanoLeaf: Fix indents to tabs
* NanoLeaf - Add debug verbosity switches
* Device switchability support, FileDevice with timestamp support
* Nanoleaf Light Panels now support External Control V2
* Enhance LedDeviceFile by Timestamp + fix readyness
* Stop color stream, if LedDevice disabled
* Nanoleaf - remove switchability
* Fix MultiColorAdjustment, if led-range is greater lednum
* Fix logging
* LedFileDevice/LedDevice - add testing support
* New "Led Test" effect
* LedDeviceFile - Add chrono include + Allow Led rewrites for testing
* Stabilize Effects for LedDevices where latchtime = 0
* Update LedDeviceFile, allow latchtime = 0
* Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates
* Updates LedDeviceFile - Initialize via Open
* Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions
* Updates ProviderUDP - Remove throwing exceptions
* Framebuffer - Use precise timer
* TestSpi - Align to LedDevice updates
* Pretty Print CrossCompileHowTo as markdown-file
* Ensure that output is only written when LedDevice is ready
* Align APA102 Device to new device staging
* Logger - Remove clang warnings on extra semicolon
* Devices SPI - Align to Device stages and methods
* Fix cppcheck and clang findings
* Add Code-Template for new Devices
* Align devices to stages and methods, clean-up some code
* Allow to reopen LedDevice without restart
* Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes"
* Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic
* Expose LedDevice getLedCount and align signedness
* Handle Exceptions in main & Pythoninit
* Have SSDPDiscover generic again
* Have SSDPDiscover generic again
* Change Info- to Debug logs as technical service messages
* Nanoleaf - When switched on, ensure UDP mode
* Include SQL Database in Cross-Compile instructions
* Fix Clazy (QT code checker) and clang Warnings
* Stop LedDevice:write for disabled device
* Nanoleaf: Fix uint printfs
* NanoLeaf: Fix indents to tabs
* NanoLeaf - Add debug verbosity switches
* Device switchability support, FileDevice with timestamp support
* Nanoleaf Light Panels now support External Control V2
* Enhance LedDeviceFile by Timestamp + fix readyness
* Stop color stream, if LedDevice disabled
* Nanoleaf - remove switchability
* Push progress
TODO: rework RESET, probably to main.cpp again
* resetPassword rework
* enable administration restriction
* add short cmd for userdata
* Js apis
* Refactor JsonCB class
* Add userToken Auth
* Feat: Close connection if ext clients when def pw is set
* Feat: Protect db against pw/token tests
* WebUi PW Support (#9)
* Initial WebUi Password Support
* Small changes
* Initial WebUi Password Support
* Small changes
* Basic WebUi Token support
* added "removeStorage", added uiLock, updated login page
* Small improvments
* Small change
* Fix: prevent downgrade of authorization
* Add translation for localAdminAuth
* Feat: Show always save button in led layout
* Revert "Feat: Show always save button in led layout"
This reverts commit caad1dfcde.
* Feat: Password change link in notification
* Fix: body padding modal overlap
* Feat: Add instance index to response on switch
* prevent schema error
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
* Feat: add pw save
* Feat: callout settings/pw replaced with notification
* Remove clone & index in ledConfig
* Additional index correction
* Rename ledsConfig maximum and minimum in max and min
* Rename ledsConfig hscan and vscan with h and v
* Optimize ledColorsStream
* tiny correction
* Added new restricted ip api checkbox, initial instance localStorage support
* Added instance notification, added correct instance switch after page refresh (to last current instance)
* Optimize intention in wizard.js
* ":" from i18n json to code
* Changes for Responsive about site
* Feat: Add image sender to webui
This PR adds a new image sending feature to the webui and extends the api accordingly. In javascript the processing of images is horrible slow (without WASM), so the solution is at the API side with out-of-the-box power of Qt.
- The image cmd accepts now a raw image that is encoded with base64. Supported are all image formats that qt supports (enough)
- There is no real size limit. It will be automatically scaled down to max 2000px width or height according to aspect ratio
- It's possible to scale down through a new "scale" property if developer wants that.
- Test were successfull until 3MP pictues, 4k+ closes the websocket on browser side, so 2k is a decent value
- Adds a new image streaming feature from browser (tabs/applications/complete desktop as target). This works just if used with HTTPS PR#612 AND with a recent version of Firefox/Chrome
* Feat: Add SSL support for webserver + websocket
Finally, Hyperion reaches the SSL century!
- Uses by default a internal key and certificate to provide working HTTPS out-of-the-box
- Your browser won't like that, for a green ssl seal next to the browser address bar you need to use Let's Encrypt with a own legit domain. This is out of the scope of Hyperion
* Moved Token Management to Network Settings
* Fixed alignment of Token Settings Div if Help Tables are switched off
* Added Chars counter, new format of the div panel (footer), change i18n
* Added Explanation for Token Management
* Moved Token Management to Network Settings
* Fixed alignment of Token Settings Div if Help Tables are switched off
* Added Chars counter, new format of the div panel (footer), change i18n
* Added Explanation for Token Management
* i18n Fix
* Revert "i18n Fix"
This reverts commit 0186290689d8b140310d5376617a3d43429bb632.
* i18n Fix
libqt5sql5-sqlite appended to the dependency list
lgtm alerts fixed
added message forwarder to global settings
subscribe type leds-update appended (thanks @Brindosch)
Boblight server port check instead of error message
Race Condition of different priorities are prevented at startup
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- Added CodeDocs config file for customization
- Fixing LGTM alerts
- LGTM bug fixed again
- added token option to hyperion-remote
- fix DBManager::getDB()
- next bugfix
- correct broken signal from SettingManager to Hyperion
- Token list is created after the schema is fetched
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- versionBranch was renamed to watchedVersionBranch (including all variables and strings. even config)
- Enhancements for JSON Editor. Detection of advanced was not so good. Now you can see advaced if advanced or expert is selected. expert is the highest and should also make advanced visible.
- The levels default, advanced, expert are now also respected in the information tabs. Same logic as for the forms itself. Expert is highest and will also show all advanced settings.
- Build problems:
- Qt 5.13 obsoleted some calls that were used in our Qt library.
- The PhilipsHueLight and PhilipsHueBridge classes did not use the private logger class
- Undo changes:
- In Commit e6c2e7e, I made changes that were not covered. An apology goes to @b1rdhous3
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- added native RPi docker image instruction to CompileHowto.md
- version channel is received from JsonAPI instead of reading from the configuration file
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
Update Check:
- New Property which allows you to select stable or beta branch checks.
- This would rely on current versions.json. It selects the first version in list with you branch (stable, beta). If it is newer hyperion tells you that a update is available
- For this we should keep our deployment pipeline in mind to format the json this way.
Cleanup:
- I cleaned up the WebUI from dead links and the support page with the affiliate links and donation adresses as we don't have them under our control. Currently only disabled, not deleated
Switcher:
- If the address which is published via bonjour serve is IPv6 the Switcher was bugged. Fixed that.
- Increases linker performance under Linux builds by using Gold linker, if available
- ccache is used if available
- removed statistic class (Stats.cpp) from project due to the missing result (sorry @Brindosch)
- add LGTM bandges for code analysis overview
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- Video format MJPEG implemented (libjpeg/qimage)
- Inactive priorities are now skipped correctly (PriorityMuxer.cpp line 297)
- v4l configuration section replaced with an object (preparation for #542)
Protocol Buffer reimplemented to receive image data from third-party apps
The status of the component "UDPListener" is now displayed correctly in WebUI
Global signal names for WebUI added
fix ge2d mode
added ge2d single/combined ioctl call
speed up imageresampler
speed up amvideocap0 mode
added config to choose if amvideocap0 or ge2d grabber should be used
- More i18n
- Easy use of mutual exclusion in JsonAPI with QMutexLocker
- Smoothing type "linear" hidden in the WebUI, because there is currently only one
- Message forwarding implemented again
- For compatibility to home assistants and other remote controls, "activeEffects" and "activeLedColor" has been added to the JSON-RPC
- FlatBuffer clear now the Priority on disconnect
- The information "available V4L2 devices" is now only displayed if the device list is not empty
- LED device "PiBlaster" excluded from OSX build
* - grabber auto off when not set as active prio
- join aml and fb - on aml platform both grabbers are needed, so they joind in one module and share one prio. user don't the the nasty magic behind
- aml: preparation for direct ge2d access
* just save it, in the middle of ge2d impl
* fix compile issues
* now grabbing works basicly
* add 3d support for ge2d
* next step, we got some video from aml
* switch back to rgba
* remove unfinished ge2d stuff
* commit missing changes
* some urgent fixes, needs some beautifying, but it works now
* fixes and refctoring
* move setvideomode to common place
* implement more croping and 3d support
* more api unification
* more refactoring
* osx fix
* next step
* add a mock for osx grabber. Now it is possible to test compile on none osx platforms.
* more unifications ...
* remove obsolete includes and grabbers are not dyn allocated. dispmanx needs rework an probaly not work atm
* first version of dispmanx mock. it compiles, but outputs a black image
* now dispmanx mock works!
* activate mocks in travis linux build
prepare dispmanx to rgb image out
* dispmanx now with image rgb output
fix deadlock with w/h -1 in grabber v4l
cleanups
* fix json
* fix some runtime stuff
* Update FramebufferWrapper.cpp
fix missing code
* unify grabframe
* 3d and croping for amlogic
* fix setimage not working
* make use of templates
save some codelines
* save more code lines
* implement set videomode via json api
* refactor grabbers:
- new base class
- move shared code to base class
* fix osx
* rework all cmakelist files with auto file collection. except leddevices (need further restructuring)
* store current video and grabbing mode
* add json stuff
* remove grabbingmode - we do not want to expose it
* add dynamic smoothing first step
* extend prio muxer to hold smoothing preset id
* add icons for systray
* fix missing changes in prio muxer
* implement specific smoothing params for effects
* refactoring: std::min/max to qMin/Max
* some code optimization
* fix schema and translation
* revoke change of python include order
* fix eol in effect shemas
* optimize random,candle and fadecandy json schemas
* add deployment
* add correct api key
* fix cmake lists and add heroku app name
* Update .gitmodules
sync modules with upstream
* add possibility to start hyperiond as systray app
* cleanup
* - new command line options: --desktop --service to set desired mode (systray icon / console only)
- auto detect x server - if avail run in gui mode
- on osx always run in gui mode
- use existing icon from webconfig, instead of own icon
- add ability to no gice a config file name. If config not given, default config file will be set (home dir, or hyperiond dir, depending on writable state)
* fix warnings and compile error
* use own icon for systray purpose
* use new logo
* - set application properties
- fix force service mode
* update
* resolve qt5w
* test
* Go down
cmake python search won the price for crazy lib searches!
* 2.7 python forced, RPATH
* upstream
* ...
* update
* ...
* 2.7.12 py it picks random versions...
* max 7.12.5....
* Test 14.04 tests
* revoke schema split
* add "getAutoCorrectedConfig" function
* revoke schema split
* revoke schema split
* revoke schema split
* Prevent compiler error if none grabber is available
* revoke schema split
* add "getAutoCorrectedConfig" function
* revoke schema split
* remove "configMigrator"
* remove "configMigrator"
* Change TestConfigFile to show how the autocorrection works
* revoke schema split
* revoke schema split
* remove "ConfigMigrator"
* remove "ConfigMigrator"
* remove "ConfigMigratorBase"
* remove "ConfigMigratorBase"
* Add QJsonUtils.h
* added ability "ignore-required"
It has been added the ability to correct the configuration without having to pay attention to the keyword "required" in the hyperion schema
* Allow Comments in Hyperion Schema
* add ability to ignore the "required" keyword in hyperion schema
* add ability to ignore the "required" keyword in hyperion schema
* add ability to ignore the "required" keyword in hyperion schema
* //Allow Comments in Hyperion Schema
* Update jsonschema.py to version 0.8.0 to support ...
references in json schema
* add RefResolver from jsonschema.py to resolve
references in hyperion schema
* remove dupe code
* split the hyperion schema in separatly files
For better readability
* add function "resolveReferences" to resolve
references in hyperion schema.
* remove CURRENT_CONFIG_VERSION
* remove CURRENT_CONFIG_VERSION
* split the hyperion schema in separatly files
For better readability
* Create schema-backgroundEffect.json
* Add the rest of the Hyperion schema via upload
* Remove Comments in config file
* Add return variable to function writeJson().
fix function resolveReferences().
edit function load() to handle QPair result from schemaChecker.
* edit function validate() to return QPair variable
* fit function loadEffectDefinition()
* fit function checkJson()
* Expand error check by dividing
"_error" variable in "_error" and "_schemaError".
Replace variable "bool" in validate() in QPair
* Extend function "cmd_cfg_set" to handle auto correction
* Extend function "loadConfig" to handle auto correction
* fix function loadConfig()
* add limit for write to leddevice
* add to default config
* add i18n
* extend xmas effect
* fix indention
* add check for minimum brightness
* adapt effects to fading and new minWriteTime
* remove old latchTime
rename minimumWriteTime to latchTime
make it as dev specific option
* set default for rewriteTime to 1s
pause smoothing on color too
* reenable smoothing for color - it looks nicer :-)
* fix timeout timer
* clean color adjustment
* now a prio duration of "0" means infinity
* implement dynamic 'just in time' initialization
* implement new brightness handling
* cahnge access level
* i18n fix
* - cleanup brightness stuff
- update webserver, now with initial ssl support
* - backlightThreshold is now 0-100 instead 0-1
- better performance for brightness - use piecewise linear instead of sqrt
* no smooth for efx
rework fade effect
* join strobe and fade effects
new effect "breath"
* - make transition efx to smooth mode more smooth
- fixes for pacman
- rework fade base effect - make it more versatile
- fix prios in schema files
- new notify blue effect to demonstrate capability of fade effect
* upd
* update
* update
* update schemachecker
* ...
* fix lowest priority
* zeroconf updates (#421) (#3)
* zeroconf:
add ip
make names more uniq
* tune dns name for webconfig
* update
* update
* update
* update ui
* ...
* min val for gamma
* lost somewhere this
* add status to hyperion object
* update ui
* start of integrating a bonkour service browser
* some experiments
* blub
* bonjour browser via jsonrpc ...
* fix indention
* - make leddevice as component
- extend sysinfo with domain
- add more data for bonjour browser (e.g. split domain and hostname)
* code cleanup
* add translation
* use component names instead of ids
* fix compile
* std::string -> qstring part 1
* more string migration
* more string migration ...
* ...
* more qstring mogrations
add sysinfo via json
* remove unneccessary includes
* integrate sysinfo into webui
* implement rigin for efx
* implement origin for effects and other components
add experimental adalight firmware for arduino with upto 5 pwm channels
* cleanup
* origin ip now with dns lookup
* fix compile
* move some code
* fix/refactor backlight stuff:
- fix colors dont turn of when backlight 0 and black is set
- add option to use not colored backlight
- fix colored backlight not colored on very low color values
- various code style tunings
* apply needed change to wizard
* backlight disabled on static color and efects
* fix warnings
* try fix udp compiler warnings
* implement config save over http post instead of json
* remove json set config
finish config write thrugh http post
* remove debug code and add failure messages
* - fix coloradjustment via hyperion remote
- several small cleanups/refactorings
* fix color is shown as unknown in json serverinfo
* fix active color is not shown when autoselect is reactivated
