raspberrymatic-addon-rmupdate/addon/firmware_update_script

#/bin/sh

DISK="/dev/mmcblk0"
BOOT_SIZE=268435456
ROOT_SIZE=1073741824
REPARTITION=0
RELABEL=0

function start_sshd() {
	echo "Starting ssh daemon.<br />" 1>&2
	mount -o remount,rw /bootfs
	echo -n "rmupdate" > /bootfs/recoveryfs-sshpwd
	mount -o remount,ro /bootfs
	/etc/init.d/S50sshd start
}

function repartition() {
	echo "Checking for rootfs2 on $DISK.<br />" 1>&2
	
	if blkid ${DISK}p3 | grep 'LABEL="rootfs2"' 1>/dev/null 2>/dev/null; then
		echo "Rootfs2 found.<br />" 1>&2
		
		cp /bootfs/VERSION /tmp/bootfs.VERSION
		umount /bootfs
		umount /rootfs
		
		echo "Current partition table:<br />" 1>&2
		parted $DISK unit B print | sed ':a;N;$!ba;s#\n#<br />#g' 1>&2
		
		boot_start=$(parted $DISK unit B print | grep '^ 1' | sed -n 's/ [1-4] *\([0-9]*\)B  *\([0-9]*\)B.*/\1/p')
		user_start=$(parted $DISK unit B print | grep '^ 4' | sed -n 's/ [1-4] *\([0-9]*\)B  *\([0-9]*\)B.*/\1/p')
		user_end=$(parted $DISK unit B print | grep '^ 4' | sed -n 's/ [1-4] *\([0-9]*\)B  *\([0-9]*\)B.*/\2/p')
		
		boot_end=$(($boot_start+$BOOT_SIZE-1))
		root_start=$(($boot_end+1))
		root_end=$(($root_start+$ROOT_SIZE-1))
		
		boot_start_s=$((${boot_start}/512))
		boot_size_s=$(((${boot_end}-${boot_start}+1)/512))
		root_start_s=$((${root_start}/512))
		root_size_s=$(((${root_end}-${root_start}+1)/512))
		user_start_s=$((${user_start}/512))
		user_size_s=$(((${user_end}-${user_start}+1)/512))
		
		echo "Calculated new partition layout:<br />" 1>&2
		echo " bootfs: $boot_start ($boot_start_s) - $boot_end - $boot_size_s<br />" 1>&2
		echo " rootfs: $root_start ($root_start_s) - $root_end - $root_size_s<br />" 1>&2
		echo " userfs: $user_start ($user_start_s) - $user_end - $user_size_s<br />" 1>&2
		
		echo "Writing new partition table to disk.<br />" 1>&2
		# parted will refuse to write partition table because partitions are mounted
		#parted --script $DISK \
		#	mklabel msdos \
		#	mkpart primary fat32 ${boot_start}B ${boot_end}B \
		#	set 1 boot on \
		#	mkpart primary ext4 ${root_start}B ${root_end}B \
		#	mkpart primary ext4 ${user_start}B ${user_end}B
		
		{
			echo "$boot_start_s,$boot_size_s,0x0C,*"
			echo "$root_start_s,$root_size_s,0x83"
			echo "$user_start_s,$user_size_s,0x83"
			,0
		} | sfdisk --no-reread --force --wipe=always --label=dos $DISK 2>&1 | sed ':a;N;$!ba;s#\n#<br />#g' 1>&2
		
		# Use dd to write label id
		printf "\xef\xbe\xed\xde" | dd of=$DISK bs=1 count=4 seek=440
		
		#echo "New partition table:<br />" 1>&2
		#parted $DISK unit B print | sed ':a;N;$!ba;s#\n#<br />#g' 1>&2
		
		partprobe
		
		# RaspberryMatic will check for label rootfs and VERSION file
		mkfs.ext4 -L rootfs ${DISK}p2
		mount ${DISK}p2 /rootfs
		cp /tmp/bootfs.VERSION /rootfs/VERSION
		umount /rootfs
	fi
}

function relabel() {
	user=$(readlink -f /dev/disk/by-label/userfs)
	user0=$(readlink -f /dev/disk/by-label/0userfs)
	tune2fs -L 0userfs $user
	tune2fs -L userfs $user0
}

echo "Deleting update_script.<br />" 1>&2
mount -o remount,rw /userfs
rm -f "$0"
mount -o remount,ro /userfs

start_sshd
[ "$RELABEL" = "1" ] && relabel
[ "$REPARTITION" = "1" ] && repartition

echo "Running fwinstall.sh (again).<br />" 1>&2
rm -f /tmp/.runningFirmwareUpdate
fwinstall.sh