mirror of
https://github.com/vdr-projects/vdr.git
synced 2025-03-01 10:50:46 +00:00
97 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Klaus Schmidinger
|
3e4e4454fc |
Version 2.1.6
VDR developer version 2.1.6 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.6.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.5-2.1.6.diff
MD5 checksums:
79519dac59166fabc2029b916bd61d00 vdr-2.1.6.tar.bz2
99f2f7094a242462696c0da5e52bb4c3 vdr-2.1.5-2.1.6.diff
WARNING:
========
This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Revoked "Fixed some compiler warnings with Clang 3.4.1" from ci.c, because this
did not compile with older versions of gcc (thanks to Sören Moch).
- Fixed keeping the current position in the Recordings menu if a recording was
deleted in a sub folder.
- Fixed handling transfer mode on full featured DVB cards for encrypted channels
that have no audio pid (reported by Christian Winkler).
- Fixed a possible endless loop in cH264Parser::GetGolombUe(), which caused recordings
on some HD channels to get stuck and resulted in buffer overflows.
- Fixed handling PAT packets when detecting frames, so that they can be properly
taken into account when regenerating the index of a recording.
- Fixed adding new source types in case they are already registered (reported by Rolf
Ahrenberg).
- Removed an unnecessary assignment from cMenuRecordings::~cMenuRecordings().
- The Recordings menu now remembers the last recording the cursor was positioned on,
independent of the last replayed recording. When a replay ends, however, the cursor
will initially be positioned to the last replayed recording again when the menu
is opened.
- Updated the Finnish OSD texts (thanks to Antti Hartikainen).
- Fixed drawing the live indicator in the LCARS skin in case there are no devices.
- When checking for obsolete channels, those with an RID that is not 0 are now
ignored (suggested by Oliver Endriss).
- The SDT is now only parsed *after* the NIT has been read, and it explicitly uses
the source value derived from the NIT. This should prevent new channels from being
created with the wrong source.
- Added a log message in case a receiver is detached from its device because the
assigned CAM can't decrypt the channel.
- Refactored setup parameter handling for output devices:
+ The function cDevice::GetVideoSystem() has been deprecated and will be removed
in a future version. In order to check whether a particular plugin needs to be
modified if this function is removed, you can comment out the line
#define DEPRECATED_VIDEOSYSTEM
in device.h.
+ Handling the "video (display) format" (things like 16:9, 4:3, pan&scan, letterbox
etc) shall now be done by the individual output devices, because the types and
numbers of parameters are too device specific. The Setup/DVB parameters
"Video format" and "Video display format" are still there for now and can be used
by SD devices. HD devices, however, shall not use these parameters (any more),
but rather implement their own setup menu with the necessary parameters for
controlling output.
+ The dvbhdffdevice plugin has been modified accordingly.
+ Made it clear that cDevice::SetDigitalAudioDevice() merely tells the output device
that the current audio track is Dolby Digital. This function was only used by the
original "full featured" DVB cards - do not use it for new developments!
If an output device has several ways of replaying audio (like HDMI or analog jack)
it shall implement the proper options in its plugin's SetupMenu() function.
- Added support for "Pilot", "T2-System-Id" and "SISO/MISO" parameters (thanks to
Rolf Ahrenberg).
- Now initializing the isOnVideoDirectoryFileSystem member of cRecording when
scanning the video directory, so that it won't cause a delay when opening the menu
on a system with a large number of recordings.
- Now resetting the isOnVideoDirectoryFileSystem member of a cRecording to -1 after
renaming it, so that it will be re-checked upon the next call to
IsOnVideoDirectoryFileSystem().
- Added support for systemd (thanks to Christopher Reimer). To activate this you
need to add "SDNOTIFY=1" to the 'make' call.
|
||
|
Klaus Schmidinger
|
716c03a47e |
Version 2.1.3
VDR developer version 2.1.3 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.3.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.2-2.1.3.diff
MD5 checksums:
054f80e0045aa6fad118e9285b52f4f2 vdr-2.1.3.tar.bz2
3c5ab05d5c4d0b984b34e84190e80949 vdr-2.1.2-2.1.3.diff
WARNING:
========
This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
Originally I intended to release this version only after the new DiSEqC
configuration dialog was finished. But in the meantime quite a few other things
have come up, so I decided to postpone that dialog and first release what has
piled up so far.
From the HISTORY file:
- Changed the return value of cPositioner::HorizonLongitude() to 0 in case the
latitude of the antenna location is beyond +/-81 degrees.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed some compiler warnings with gcc-4.6.3 (thanks to Rolf Ahrenberg).
- Changed the name of the SVDRP command RENR to MOVR (suggested by Rolf Ahrenberg).
- When cutting a recording it is now checked whether there is already an edited
version of this recording (with the same name, but starting with '%'), and the
user is prompted for confirmation to overwrite it (suggested by Rolf Ahrenberg).
- Revoked "Added maximum signal strength value for TechniSat SkyStar 2 DVB-S rev 2.3P"
because it broke things for the "TechniSat AirStar 2" DVB-T card.
- The LIRC remote control now connects to the socket even if it doesn't yet exist when
VDR is started (thanks to Lars Hanisch).
- Changed the absolute latitude limit for visible satellites to 81.2 degrees.
- Added code for parsing LCN and AVC descriptors to libsi (thanks to Rolf Ahrenberg).
- In the "Select folder" menu pressing Ok now selects the folder, even if this is a
folder that contains sub folders (marked with "..."). To open such a folder you
can press the Red key.
- Fixed a possible access to uninitialized data in cEIT::cEIT() (reported by Dominik
Strasser).
- The new menu category mcRecordingEdit is now used to mark menus that edit recording
properties (suggested by Stefan Braun).
- Changes in the teletext PID no longer cause retuning (and thus interrupting a
recording).
- Removed '_' from the FileNameChars and CharMap translations in uk_UA.po.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed a missing initialization in the c'tor of cSkinLCARSDisplayChannel (thanks to
Marko Mäkelä).
- Simplified some conditional expressions in skinlcars.c and skinsttng.c (suggested
by Marko Mäkelä).
- Fixed uninitialized item area coordinates in cSkinLCARSDisplayMenu (reported by
Marko Mäkelä).
- Fixed a possible crash if the recordings list is updated externally while the
Recordings menu is open (reported by Lars Hanisch).
- Added a missing closing ')' in the help and man page entry of the --vfat option
(reported by Lars Hanisch).
- Fixed setting the name of the video directory to avoid a crash when using --genindex,
and also to use the correct directory with --edit (the latter reported by Marko
Mäkelä).
- The Recordings menu can now be called with a cRecordingFilter, which allows the
caller to have it display only a certain subset of the recordings (thanks to Lars
Hanisch).
- Added handling UTF-8 'umlaut' characters to cKbdRemote (thanks to Lars Hanisch).
- Made it clear that the Data parameter in cDevice::StillPicture() may point to a
series of packets, not just a single one (thanks to Thomas Reufer).
- cDevice::TrickSpeed() now has an additional parameter named Forward, which indicates
the direction in which replay is being done (suggested by Thomas Reufer). This
information may be necessary for some output devices in order to properly implement
trick modes. Authors of plugins that implement output devices will need to add this
parameter to their derived cDevice class, regardless of whether they will make use
of it or not.
- Added a note to ePlayMode in device.h that VDR itself always uses pmAudioVideo when
replaying a recording (suggested by Thomas Reufer).
- Fixed some spellings in positioner.h and Doxyfile (thanks to Ville Skyttä).
- Changed '%a' to the POSIX compliant '%m' in all scanf() calls (thanks to Ville
Skyttä).
- The new function cCamSlot::Decrypt() can be used by derived classes to implement a
CAM slot that can be freely assigned to any device, without being directly inserted
into the full TS data stream in hardware. A derived class that implements Decrypt()
will also need to set the new parameter ReceiveCaPids in the call to the cCamSlot
base class constructor to true, in order to receive the CA pid TS packets that
contain data necessary for decrypting.
- Many member functions of cCamSlot have been made virtual to allow for easier
implementation of derived classes.
- cTSBuffer now provides the number of available bytes in its Get() function.
- cDvbDevice::GetTSPacket() now calls CamSlot()->Decrypt() in order to allow CAM slots
that can be freely assigned to any device access to the TS data stream.
- Added a check to avoid a possible NULL pointer dereference in cCiSession::SendData()
(reported by Ville Skyttä).
- Deleted a superfluous assignment in cPipe::Open() (reported by Ville Skyttä).
- The script given to VDR with the '-r' option is now also called after the recording
process has actually started (thanks to Christian Kaiser).
- Avoiding unnecessary pkg-config warnings in plugin Makefiles (thanks to Ville Skyttä).
Plugin authors may want to apply the following change to their Makefile:
-PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell pkg-config --variable=$(1) vdr || pkg-config --variable=$(1) ../../../vdr.pc))
+PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell PKG_CONFIG_PATH="$$PKG_CONFIG_PATH:../../.." pkg-config --variable=$(1) vdr))
- Eliminated MAXDVBDEVICES (suggested by Oliver Endriss).
- Channels that are no longer contained in the current SDT of a transponder are now
marked with the keyword OBSOLETE in their name and provider fields. That way you can
identify obsolete channels when you switch to them, and you can get the complete
overview of all obsolete channels by sorting the Channels list by provider (by
pressing the 0 key twice). Automatic deletion of obsolete channels may follow later.
|
||
|
Klaus Schmidinger
|
277d66bfe1 |
Version 2.1.2
VDR developer version 2.1.2 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.2.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.1-2.1.2.diff
MD5 checksums:
4725e9cb26fea8fa3682dd30f5594a50 vdr-2.1.2.tar.bz2
869d9b298b432a505186328bcf0b53c6 vdr-2.1.1-2.1.2.diff
WARNING:
========
This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed displaying DVB subtitles (thanks to Rolf Ahrenberg for helping to debug and
understand subtitle page refreshes):
+ Fixed handling DVB subtitle fill region codes for 2 and 8 bpp.
+ Fixed handling pages without an explicit END_OF_DISPLAY_SET_SEGMENT.
The FINISHPAGE_HACK is no longer necessary.
+ Fixed handling "page refreshes". The data is now parsed and stored closer to the
DVB standard specs, introducing "object refs" and "region refs".
+ The debug output now goes into an HTML file named dbg-log.htm and shows the actual
bitmaps (dbg-nnn.jpg) used to display the subtitles. That way it is much easier to
see what's actually going on.
+ Fixed handling subtitles encoded as a string of characters (the very first
character was always skipped).
- Fixed wrong initialization of Setup.PositionerSwing (reported by Arthur Konovalov).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed cleaning up old EPG events in case no epg data file is given (reported by
Dave Pickles).
- Unified the internal sequence of actions when pressing the Blue and the Back key,
respectively, during replay (reported by Thomas Maass).
- The Yellow button in the main menu no longer acts as "Pause" if "Pause key handling"
is set to "do not pause live video" (suggested by Ulf Kiener).
- The code for distributing recordings over several video directories has been
removed. VDR now by default assumes that the video directory is one big disk.
If you absolutely need to use several separate disks to store recordings, you can
write a plugin that uses the new cVideoDirectory API to implement the necessary
functionality (see PLUGINS.html, section "The video directory"). You can copy the
respective code from previous versions of videodir.c.
IMPORTANT NOTE: If you write a plugin that implements a distributed video directory,
=============== be sure to make cVideoDirectory::Rename() follow symbolic links!
This functionality was never implemented in VDR and it therefore
used a workaround in cutter.c. See the section marked with
// XXX this can be removed once RenameVideoFile() follows symlinks
in previous versions of cutter.c.
+ CloseVideoFile() is obsolete and has been removed.
+ The functions OpenVideoFile(), RenameVideoFile(), RemoveVideoFile(), VideoFileSpaceAvailable(),
VideoDiskSpace(), RemoveEmptyVideoDirectories(), IsOnVideoDirectoryFileSystem() and
PrefixVideoFileName() are now static members of cVideoDirectory and need to be called
with the proper prefix.
+ The name of the video directory is now available through cVideoDirectory::Name().
- Added renaming and moving recordings and folders, editing a recording's priority and
lifetime, and queueing cutting jobs (inspired by the "extrecmenu" plugin from Martin
Prochnow).
+ The "Recording info" menu now has a new Blue button named "Edit", which opens a
dialog in which several properties of the selected recording can be changed. It can
be renamed or moved into another folder and its priority and lifetime can be
modified (inspired by the "extrecmenu" plugin from Martin Prochnow).
The new blue "Edit" button in the "Recordings" menu opens a dialog in which a folder
can be renamed or moved. See MANUAL, section "Managing folders".
+ In the "Edit recording" menu the Yellow button ("Delete marks") allows you to delete
all editing marks of the selected recording.
+ cCutter is no longer a static class. Cutting requests should now be invoked by
calling RecordingsHandler.Add(ruCut, FileName). See the new cRecordingsHandler
class in recording.h.
+ Cutting jobs are now placed in a queue (together with any move or copy jobs) and
are processed one by one.
+ The new SVDRP command RENR can be used to rename a recording (suggested by Rolf
Ahrenberg).
+ Note that in several places in the source code a "copy" operation is mentioned,
however there is no user interface for this, yet.
- Changed some variable names in positioner.c to match the names used in the page with
the explanation on vdr-portal.de.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed writing group separators to channels.conf that contain a comma (reported by
Eike Edener).
- Now also checking the source (in addition to the transponder) when setting the
system time from the TDT, which avoids problems in case devices are tuned to the
same transponder on different sources, and these broadcast different time data
(reported by Torsten Lang).
- Changed cRecorder::Action() to use cTimeMs instead of time() to avoid problems with
unjustified "video data stream broken" errors in case the system time is changed
while a recording is active (reported by Torsten Lang).
- Revised the section on "Learning the remote control keys" in the INSTALL file to
avoid the impression that there actually is a default remote.conf file, and to
not use any alphabetic keys for special functions, so that they remain available
for textual input.
- The function cRecordings::MBperMinute() now only takes into account recordings with
less than 5 seconds per megabyte, in an attempt to filter out radio recordings
(thanks to Harald Koenig). The result of this function was way off any realistic
value in case there are many radio recordings in the video directory.
- Added maximum signal strength value for TechniSat SkyStar 2 DVB-S rev 2.3P (thanks
to Guido Cordaro).
- Fixed an inconsistent behavior between opening the Recordings menu manually via the
main menu and by pressing the Recordings key. In the latter case it automatically
opened all sub folders to position the cursor to the last replayed recording, which
is unexpected at this point (reported by Helmut Auer). You can still navigate to
the last replayed recording (if any) by pressing Ok repeatedly in the Recordings
menu.
|
||
|
Klaus Schmidinger
|
5076cfb2ed |
Version 2.1.1
VDR developer version 2.1.1 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.1.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.0.0-2.1.1.diff
MD5 checksums:
b17f9838bb8ddee9620f838fea7a171d vdr-2.1.1.tar.bz2
8b8ca593885c380cd370e6d19a5b16a1 vdr-2.0.0-2.1.1.diff
WARNING:
========
This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The main focus of this version is on adding basic support for positioners
to control steerable satellite dishes. Manually controlling the dish position
and storing individual positions will follow later.
The fixes contained in this version will be released in a stable version 2.0.3
later, if there are no problems.
From the HISTORY file:
- Fixed initializing cDevice::keepTracks.
- Fixed an endless loop in cTextWrapper::Set() in case the given Width is smaller than
one character (reported by Stefan Braun).
- Removed all "modified since version 1.6" markers from PLUGINS.html.
- Added definitions for older DVB API versions, back until 5.0 (based on a patch from
Udo Richter).
- Changed cThread::SetIOPriority() from "best effort class" to "idle class" in order to
improve overall performance when an editing process is running (thanks to Jochen
Dolze).
- Fixed handling '/' and '~' in recording file names in case DirectoryEncoding is
used (thanks to Lars Hanisch).
- Changed the sign of the satellite position value in cSource to reflect the standard
of western values being negative. The new member function cSource::Position() can be
used to retrieve the orbital position of a satellite.
- Fixed multiple occurrences of the same directory in the recordings list in case there
are directories that only differ in non-alphanumeric characters (was broken by
"Fixed selecting the last replayed recording in the Recordings menu in case there
are folders and plain recordings with names that differ only in non-alphanumeric
characters" in version 1.7.36).
- Fixed displaying the frame number when setting an editing mark (thanks to Thomas
Günther).
- Fixed no longer generating any editing marks if the edited recording results in just
one single sequence (reported by Halim Sahin).
- Fixed an error message when parsing SCR values in diseqc.conf.
- Fixed an unexpected RCS version tag in the newplugin script.
- Fixed an endless loop in the DrawEllipse() functions for very small ellipses (reported
by Stefan Braun).
- Fixed a crash in the LCARS skin's main menu in case there is no current channel
(reported by Dominique Dumont).
- Added basic support for positioners to control steerable satellite dishes (based on
a patch from Seppo Ingalsuo and Ales Jurik).
+ Supports GotoN (aka "DiSEqC 1.2") and GotoX (aka "USALS").
+ The new DiSEqC command code 'P' can be used to instruct a positioner to move the
dish to the required satellite position. When a 'P' code is processed, further
execution of the remaining DiSEqC sequence (if any) is postponed until the positioner
has reached the new satellite position.
+ The new special source value of "S360E" can be used in diseqc.conf to indicate that
an entry using a positioner can move the dish to any requested position within its
range. Think of it as "full circle".
+ The devices a particular cDiseqc or cScr applies to are now stored directly in each
cDiseqc or cScr, respectively.
+ A plugin can implement a custom positioner control (see PLUGINS.html, section "Positioners").
+ The new function cSkinDisplayChannel::SetPositioner() can be implemented by skins to
show the user a progress display when the dish is being moved. The default implementation
calls SetMessage() with a string indicating the new position the dish is being moved to.
The LCARS skin shows a progress bar indicating the movement of the dish.
+ The new parameters "Site latitude", "Site longitude", "Positioner speed", and
"Positioner swing" in the "Setup/LNB" menu can be used to configure the necessary
values for a steerable dish.
+ The cDvbTuner now has a new status tsPositioning, in which it waits until a steerable
dish has reached its target position. Parsing SI data is paused until the target
position has been reached.
- The LCARS skin now shows the source value of the current channel in its channel display.
- Fixed asserting free disk space in the cutter.
- No longer trying to delete old recordings in AssertFreeDiskSpace() if the given
Priority is less than 1.
- Fixed handling LIRC events in case repeated events are lost.
- Fixed a possible crash when shutting down VDR while subtitles are being displayed
(reported by Ville Skyttä).
- cDevice::IsPrimaryDevice() now also checks whether the primary device actually has
a decoder and returns false otherwise. This should improve device allocation on
systems that are only used as a receiver and don't actually display anything.
- Increased the value of MAXRETRIES to 20 to reduce the probability of disturbances
in transfer mode.
- All bonded devices (except for the master) now turn off their LNB power completely
to avoid problems when receiving vertically polarized transponders (suggested by
Manfred Völkel and Oliver Endriss).
- Reverted the change from version 1.5.7 that made all logging go to LOG_ERR (thanks
to Christopher Reimer).
- Added Begin/EndSegmentTransfer() to the EPG handler interface (thanks to Jörg Wendel).
- The code for distributing recordings over several video directories is now
deprecated and disabled by default.
You can re-enable this feature by removing the comment sign ('//') from the beginning
of the line
//#define DEPRECATED_DISTRIBUTED_VIDEODIR // Code enclosed with this macro is ...
in the file videodir.c. Note, though, that this can only be a temporary workaround.
This feature will be completely removed in one of the next developer versions.
Distributing the video directory over several disks was a useful feature in times
when disks were still relatively small, but it also caused serious problems in case
one of the disks failed. Nowadays hard disks come in sizes measured in terabytes,
and tools like "mhddfs" can be used to combine several disks to form one large volume.
A recommended method for a relatively safe disk setup in a VDR system is to use two
1TB (or larger) disks and use them as a RAID-1 (mirrored). That way, if one disk
fails, you can replace it without data loss.
|
||
|
Klaus Schmidinger
|
d1b0368a15 |
Version 1.7.41
VDR developer version 1.7.41 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.41.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.40-1.7.41.diff
MD5 checksums:
c7928bff45fa1c0e6dadf2c0a5adf94b vdr-1.7.41.tar.bz2
d20f62005288f54bb4596e1e091419ac vdr-1.7.40-1.7.41.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
Approaching version 2.0.0:
==========================
If there are no more serious bug reports, the final version 2.0.0 of VDR
shall be released on March 31, 2013.
So please test this developer version intensely and report any problems
you might encounter as soon as possible.
The following language files still have the given number of untranslated texts:
da_DK.po: 134
el_GR.po: 197
hr_HR.po: 134
lt_LT.po: 1
nn_NO.po: 262
pt_PT.po: 28
sl_SI.po: 1
sr_SR.po: 80
tr_TR.po: 134
If nobody takes care of these, they will remain untranslated in version 2.0.0.
From the HISTORY file:
- Updated the Hungarian OSD texts (thanks to István Füley).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Updated the Polish OSD texts (thanks to Marek Nazarko).
- Fixed using PATH_MAX and NAME_MAX (+/-1 because the first one includes the
terminating 0, while the latter doesn't).
- The 'plugins' target of the VDR Makefile now also copies files matching the wildcard
"lib$$i-*.so" (previously only "libvdr-*.so") and also descends into subdirectories
of the plugin source.
- The parameters PATH and NAME to the --dirnames command line option may now be left
empty to use the default values if only ENC shall be set (thanks to Helmut Auer for
some improvements to this change).
- Fixed a possible "Channel not available" if a recording starts on a system with
bonded devices (thanks to Siegfried Bosch).
- Fixed stopping an ongoing recording on a system with bonded devices, if a timer with
a higher priority requires a different band.
- Updated the introductory text of the vdr.1 man page.
- Added a note to the INSTALL file regarding multiple disk setup becoming deprecated
in a future version of VDR.
- When switching to a less privileged user id, VDR now sets the environment variables
HOME, USER, LOGNAME and SHELL accordingly (thanks to Manuel Reimer).
- Updated the help and man page entry about the location of the epg.data file (thanks
to Ville Skyttä).
- Fixed creating a new VPS timer with the SVDRP command NEWT (thanks to Johann
Friedrichs).
|
||
|
Klaus Schmidinger
|
bda389f8b0 |
Version 1.7.40
VDR developer version 1.7.40 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.40.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.39-1.7.40.diff
MD5 checksums:
f59a7ac199248a870e157c66a6ffc24d vdr-1.7.40.tar.bz2
acff088cc27296cb2c5b794ad4b2e0a8 vdr-1.7.39-1.7.40.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
Approaching version 2.0.0:
==========================
If there are no more serious bug reports, the final version 2.0.0 of VDR
shall be released on March 31, 2013.
So please test this developer version intensely and report any problems
you might encounter as soon as possible.
From the HISTORY file:
- The "Recording info" page of the skins that come with VDR now displays the name of
the channel (if available) from which this recording was taken.
- Updated the Catalan OSD texts (thanks to Luca Olivetti).
- Updated the Spanish OSD texts (thanks to Luca Olivetti).
- Added a note about the new default sort order of recordings to the release notes of
version 1.7.29 and the UPDATE-2.0.0 file (pointed out by Wolfgang Rohdewald).
- Fixed a faulty UTF-8 character in cs_CZ.po.
- Added the system's character set to the page header in the epg2html script (pointed
out by Dimitar Petrovski).
- Updated the Slovenian OSD texts (thanks to Matjaz Thaler).
- The new option "Setup/OSD/Always sort folders first" can be used to control whether
folders will be always at the top of the Recordings menu, or will be interspersed
with plain recordings when sorted alphabetically.
- Updated the Swedish OSD texts (thanks to Richard Lithvall).
- Updated the Chinese OSD texts (thanks to Nan Feng).
- Updated the Slovak OSD texts (thanks to Milan Hrala).
- Updated the Macedonian OSD texts (thanks to Dimitar Petrovski).
- Updated the Dutch OSD texts (thanks to Cedric Dewijs).
- Updated the Czech OSD texts (thanks to Ales Jurik).
- Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Updated the French OSD texts (thanks to Dominique Plu).
- Updated the Finnish OSD texts (thanks to Matti Lehtimäki).
- Updated the Arabic OSD texts (thanks to Osama Alrawab).
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Renamed the "plp id" to a more general "stream id" and added support for DVB-S2
"Input Stream Identifier" (ISI) (based on a patch from Rolf Ahrenberg).
With this VDR now supports "multi streaming" on DVB-S2 and DVB-T2 transponders.
- Fixed a possible deadlock when changing the audio track while replaying a recording.
- Fixed resuming replay of PES recordings (reported by Oliver Endriss).
- Limited the Goto() call in cDvbPlayer::SetAudioTrack() to the main thread, in order
to avoid a crash when the track is automatically set from the player thread.
- The LCARS skin now calls SetAntiAliasGranularity(20, 16) in order to reserve enough
fixed colors on 8bpp displays with anti-aliasing.
- Changed the default values for the OSD size back to those before version 1.7.29,
to avoid problems with SD-FF cards in case the user switches to the "ST:TNG" or
"Classic" skin.
|
||
|
Klaus Schmidinger
|
b8b6cd3e89 |
Version 1.7.39
VDR developer version 1.7.39 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.39.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.38-1.7.39.diff
MD5 checksums:
3f0681f4aa6bd8deffc8208c40d34d2d vdr-1.7.39.tar.bz2
1c13a683694c6c3c52444c1689477876 vdr-1.7.38-1.7.39.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
Approaching version 2.0.0:
==========================
If all goes well, there will be just one more developer version after
this one, and then it's going to be version 2.0.0.
From the HISTORY file:
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the Polish OSD texts (thanks to Marek Nazarko).
- Modified handling user inactivity in the shutdown handler to avoid a problem in case
the system time is changed after VDR has been started (thanks to Udo Richter, reported
by Sören Moch).
- Updated the Czech OSD texts (thanks to Ales Jurik).
- Changed the template for PLGCFG to $(CONFDIR)/plugins.mk (thanks to Ville Skyttä).
- Updated the Swedish OSD texts (thanks to Richard Lithvall).
- Now clearing device bondings for devices that don't provide DVB-S in the Setup/LNB
menu (reported by Juergen Lock).
- Fixed a possible deadlock in handling the tuners of bonded devices (thanks to
Juergen Lock).
- Improved working around the broken driver values for SNR in case of a "TT-budget
S2-3200" receiving DVB-S2.
- The demos in the "osddemo" plugin can now also be ended with the "Back" key.
- Fixed flashing OSD in "high level OSD" mode of the TT S2-6400 in case a menu is open
while subtitles are being displayed.
- Fixed stuttering or asynchronous audio after changing the audio track. This is done
by doing a "jump" to the current position, which clears all buffers. However, this
only works with TS recordings. With PES recordings it causes a segfault - haven't
been able to figure out why.
- Added a manual page for 'svdrpsend' (thanks to Tobias Grimm).
- Fixed immediately disappearing subtitle track menu in "high level OSD" mode of the
TT S2-6400 when selecting "No subtitles".
- Updated the French OSD texts (thanks to Bernard Jaulin).
- Updated the Dutch OSD texts (thanks to Carel Willemse).
- Removed all "fuzzy" translations from the files ar.po, hu_HU.po and sr_SR.po, because
more often than not they are just wrong.
- Now calling DeviceClear() in cTransfer::Receive() if the output device blocks, instead
of not retrying for 10 seconds (reported by Andreas Mair, with help from Oliver Endriss).
- Updated the Spanish OSD texts (thanks to Luca Olivetti).
- Updated the Hungarian language texts (thanks to István Füley).
- Changed the calls to Skins.QueueMessage() in vdr.c that are related to reporting the
status of the editing process back to Skins.Message() in order to have them appear
immediately.
- When sorting recordings by name, folders are now always at the top of the list.
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
|
||
|
Klaus Schmidinger
|
4c59501a6b |
Version 1.7.38
VDR developer version 1.7.38 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.38.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.37-1.7.38.diff
MD5 checksums:
f4ef0f60ed662f3c983a830da67df9b2 vdr-1.7.38.tar.bz2
e945b0f44e13ed768de726cf6e66317c vdr-1.7.37-1.7.38.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
Approaching version 2.0.0:
==========================
If all goes well, there should be no more functional or API changes
before the final version 2.0.0. There will just be a few more fixes.
From the HISTORY file:
- Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Updated the French OSD texts (thanks to Marc Perrudin, Bernard Jaulini and Peter
Münster).
- Updated the Macedonian OSD texts (thanks to Dimitar Petrovski).
- Fixed moving editing marks, so that they don't get overwritten with old values
through an update of the marks file.
- Removed an invalid line from channels.conf.terr (reported by Lars Hanisch).
- Fixed an unexpected k_Repeat key event after a k_Release in lirc.c.
- Fixed permissions of po/sr_SR.po (reported by Dominic Evans).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed using "Pause" and "Slow motion" near the end of a recording (replay stopped
a few seconds after the end of the recording file has been reached).
- Fixed selecting the last replayed recording in the Recordings menu in case there
are folders and plain recordings with names that differ only in non-alphanumeric
characters (reported by Andre Weidemann).
- Fixed the description of the OSD drawing functions DrawEllipse() (the values -5...-8
for the Quadrants parameter are not implemented).
- Made cOsd::DestroyPixmap() "NULL proof".
- Now deleting any previously allocated pixmaps in cOsd::SetAreas().
- Added demos of the DrawEllipse() and DrawSlope() function to the 'osddemo'
plugin (press '1' or '2', respectively).
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- The timeout for trying to switch to a valid programme is now reset immediately once
a programme has been found.
- No longer checking for EOPNOTSUPP in cDvbTuner::GetSignalQuality() to avoid breaking
this function in case the driver suddenly decides to return a different errno value
if an operation is not supported.
- Moved the definition of TIMERMACRO_TITLE and TIMERMACRO_EPISODE from recording.h to
config.h and using them to initialize Setup.NameInstantRecord (avoids having the same
information in two places).
- Fixed the return value of cOsdProvider::StoreImage() in case there is no OSD provider.
- Fixed a crash in cMenuEditChanItem::Set() when entering a channel number that
doesn't exist (reported by Mikael Hübsch).
- Fixed displaying pending timers in "alert" mode in the LCARS skin.
- Added missing $(LDFLAGS) to the Makefile of the dvbhddevice plugin (thanks to Ville
Skyttä).
- Fixed some spellings in PLUGINS.html and Doxyfile (thanks to Ville Skyttä).
- Added '-p' to the cp command in the install-conf target of the Makefile (thanks to
Ville Skyttä).
- Added missing 'const' to cDevice::HasProgramme() and cDevice::HasLock().
- Fixed determining the priority of the primary device in case it is neither replaying
nor receiving a live channel (thanks to Matthias Senzel for reporting a problem with
switching back to live viewing after replay in a setup with device bonding).
- Removed all \return and \param tags from comment lines marked with "///<" for Doxygen.
There was only a rather small number of these, and I would probably always forget to
put them in place when writing future comments, so I decided to drop them entirely.
- Added Doxyfile.filter to have special characters escaped that would otherwise be
dropped by Doxygen (reported by Ville Skyttä).
- Using 'cat' instead of 'cp' to copy the Doxyfile to avoid problems in case Doxyfile
is write protected.
- Updated the Doxyfile with a newer version of Doxygen.
- Turned off following symlinks in the Doxyfile.
- Removed trailing whitespace.
- Expanded tabs in PLUGINS/src/dvbhddevice/setup.c.
- Some formatting fixes.
|
||
|
Klaus Schmidinger
|
14bd32b948 |
Version 1.7.37
VDR developer version 1.7.37 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.37.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.36-1.7.37.diff
MD5 checksums:
602dc7e678bcfcf075da36344a337562 vdr-1.7.37.tar.bz2
34e953fcffc112f316cbfc1f53915324 vdr-1.7.36-1.7.37.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
Approaching version 2.0.0:
==========================
If all goes well, there should be no more functional or API changes
before the final version 2.0.0. There will just be a few more fixes.
From the HISTORY file:
- Now also using FindHeader() in cMpeg2Fixer::AdjTref() (pointed out by Sören Moch).
- Added missing template for DVBDIR to Make.config.template (reported by Derek Kelly).
- The LCARS menu now also works if the OSD has only 1bpp (two colors).
- Fixed possible garbage in the remaining time of the LCARS replay display in case the
hours change from two to one digit.
- Fixed upscaling bitmaps. The last row and column of the scaled bitmap was not filled,
which resulted in empty lines between scaled subtitles.
- Fixed a leftover line in case a two line subtitle was followed by a one line
subtitle on the dvbhddevice in "high level" OSD mode.
- Returning 0 from cDvbSdFfDevice::NumProvidedSystems() if option --outputonly is given.
- The index file is now closed after initially reading it if it is older than 3600 seconds.
- Improved responsiveness during replay when close to the recording's end.
- Fixed a leftover progress display in the LCARS main menu when replay of a recording
ends while the menu is open, and the live channel has no EPG information.
- Fixed possible audio chatter when a recording is replayed to its very end.
- Added dependency on 'i18n' to 'install-i18n' in the VDR Makefile (thanks to Tobias
Grimm).
- Changed several calls to Skins.Message() in vdr.c to Skins.QueueMessage() in order to
avoid a black screen while such a message is displayed in case the channel will be
switched (reported by Uwe Scheffler).
- Updated the Slovakian language texts (thanks to Milan Hrala).
- Improved LIRC timing for repeat function.
- When pausing live video, the current audio and subtitle tracks are now retained.
- Added some notes about plugin Makefiles to PLUGINS.html.
- Avoiding an extra key press event if the repeat function kicks in when controlling
VDR via the PC keyboard.
- The new options "Setup/Miscellaneous/Remote control repeat delay" and
"Setup/Miscellaneous/Remote control repeat delta" can be used to adjust the
behavior of the remote control in case a key is held pressed down for a while, so
that the repeat function kicks in (see MANUAL).
The builtin LIRC and KBD remote controls already use these parameters. It is
recommended that plugins that implement an interface to any kind of remote controls
also use the parameters Setup.RcRepeatDelay and Setup.RcRepeatDelta for the desired
purpose, and remove any setup options they might have that serve the same purpose.
- cTimer no longer does any special "VFAT" handling to shorten directory names to 40
characters. When a string is used as a directory name for a recording, the maximum
length of the directory path, as well as the individual directory names, is now
limited to the values specified by the new command line option --dirnames (see
man vdr(1) for details). For backwards compatibility the option --vfat is still
available and has the same effect as --dirnames=250,40,1.
- The macro MaxFileName is now obsolete and may be removed in future versions. Use
NAME_MAX directly instead.
- There is no more fixed limit to the maximum number of cPixmap objects an OSD can
create. However, a particular device may still be unable to create an arbitrary
number of pixmaps, due to limited resources. So it's always a good idea to use
as few pixmaps as possible.
- Fixed formatting and removed some superfluous break statements in vdr.c's command
line option switch.
|
||
|
Klaus Schmidinger
|
5109addf9c |
Version 1.7.33
VDR developer version 1.7.33 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.32-1.7.33.diff
MD5 checksums:
7c21451360ac7959d0d95e533d34451c vdr-1.7.33.tar.bz2
c79257198f8569bc02f43dc470ee3076 vdr-1.7.32-1.7.33.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
IMPORTANT:
==========
This version of VDR no longer sets LC_NUMERIC to "C" in order to make
sure any floating point numbers written to configuration files use a
proper decimal point. It rather explicitly converts such numbers using the
new functions atod() and dtoa().
IF YOU USE PLUGINS THAT STORE FLOATING POINT NUMBERS IN THEIR OWN CONFIGURATION
FILES, YOU SHOULD SET
export LC_NUMERIC=C
BEFORE RUNNING VDR, UNTIL THESE PLUGINS HAVE BEEN PROPERLY UPDATED.
From the HISTORY file:
- In order to be able to play TS recordings from other sources, in which there is
more than one PMT PID in the PAT, 'int cPatPmtParser::PatPmt(void)' has been changed
to 'bool cPatPmtParser::IsPatPmt(int Pid)'.
- Fixed learning remote control keys with the LCARS skin.
- Updated the Macedonian OSD texts (thanks to Dimitar Petrovski).
- Fixed getting only non-video packets in cCuttingThread::GetPendingPackets() (reported
by Sören Moch).
- Changed all occurrences of MPEG4 to H264 (pointed out by Sören Moch).
- Fixed getting the number of editing sequences in case the last sequence has no actual
end mark.
- The cutter now only increments the TS continuity counter for packets that have a
payload (pointed out by Sören Moch).
- Fixed adjusting the DTS values in the cutter, to compensate for dropped B-frames
(pointed out by Sören Moch).
- Fixed a typo in skins.h (thanks to Lars Hanisch).
- Simplified calculating the PTS offset in cPtsFixer::Fix() and fixed the overflow
handling of PCR values (thanks to Sören Moch).
- Fixed calling iconv_close() only with a valid iconv_t value (thanks to Juergen Lock).
- Fixed faulty opening of the Recordings menu when pressing the Play key during normal
live viewing mode in case there is a "last viewed" recording.
- Fixed some #include statements in plugins to use <vdr/...> instead of "vdr/..."
(thanks to Lars Hanisch).
- Fixed some spellings in osd.h and svdrp.c (thanks to Ville Skyttä).
- Fixed handling lowercase polarization characters in channel definitions if no DiSEqC
is used (reported by Mike Hay, actual bug pointed out by Stefan Huelswitt).
- Synchronizing system time to the transponder time is now done using adjtime() in order
to avoid discontinuities (suggested by Manuel Reimer). If the time difference is more
than 10 seconds, stime() is still used to do the initial sync.
- The '7' and '9' keys now jump to the very beginning or end, respectively, of the
recording, even if there is no mark set at that point (following a request from
Andre Weidemann).
- Now always setting the TDT EIT filter, because otherwise when turning on using the
transponder time in the Setup menu, it would only be used after the next restart
of VDR (thanks to Sundararaj Reel).
- The new functions cDevice::CanScaleVideo() and cDevice::ScaleVideo() can be used by
derived output devices to implement scaling the video to a given size and location
(based on a suggestion by Lucian Muresan).
- The SVDRP command HITK now discards any keys if the remote control is currently
turned off (thanks to Alexander Hans).
- The new remote control key "Play/Pause" can be used with remote controls that don't
have separate keys for "Play" and "Pause", but rather have a single key for both
functions (thanks to Stefan Hofmann for suggesting to implement support for such
remote controls).
- The new option "Setup/Replay/Pause on mark set" can be used to activate automatically
going into Pause mode if an editing mark is set during replay (suggested by Andre
Weidemann).
- When regenerating the index of a recording, the frame rate stored in the info file
is now automatically fixed if it differs from the value detected by the frame
detector.
- Fixed creating the edited version directory if a relative file name is given in
the call to 'vdr --edit' (the '/video' part was stripped from the given file name
even if it wasn't there).
- The new option "Setup/Replay/Progress display time" can be used to activate
automatically displaying the progress display whenever replay of a recording is
started (suggested by Stefan Blochberger).
- Changed reading and writing of floating point numbers into configuration files to
make it independent of the decimal point used in the current locale. All calls to
atof() have been replaced with the new function atod(), which makes sure the string
representation of a floating point number using a '.' as decimal point will be
handled correctly, even if the locale in use expects a ',' as the decimal point.
Plugins that read floating point numbers from their own configuration files will
also need to use atod() for this, or use a method of their own (this is not necessary
if values are stored in VDR's setup.conf file, because VDR takes care of this).
The reason for these changes is that floating point numbers presented to the user
shall be displayed in the way defined by the current locale (suggested by Stefan
Blochberger).
If you use plugins that store floating point values in configuration files of their
own and have not yet been adapted to this change, you should set
export LC_NUMERIC=C
before running VDR. Otherwise your plugin's configuration data may not be read or
written correctly.
- The new functions SetItemEvent(), SetItemTimer(), SetItemChannel() and
SetItemRecording() of the cSkinDisplayMenu class can be reimplemented by skin
plugins to display these items in a more elaborate way than just a simple line of
text.
|
||
|
Klaus Schmidinger
|
beffcabc81 |
Version 1.7.32
VDR developer version 1.7.32 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.32.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.31-1.7.32.diff
MD5 checksums:
068ba78fd427694dcc480fe3b2d07148 vdr-1.7.32.tar.bz2
222f1e9b4d4edaa6fe57286409614cc7 vdr-1.7.31-1.7.32.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The main focus of this version is on an improved frame detection code,
and improvements to the cutting process. When cutting a recording, VDR
now removes any "dangling" TS packets from the beginning of an editing
sequence and pulls in any "pending" TS packets at the end of a sequence.
It also fixes all timestamps and continuity counters.
However, while the results look much better now in, for instance, Kaffeine,
the TT S2-6400 still shows some video artifacts at the editing points, and
the Mac video player sometimes totally chokes on edited material.
I did spend a lot of time trying to find out what could still be wrong here,
but couldn't come up with any new ideas. So I think it's now time to invite
others to test this new cutting code, read the source code and try to find
out what's still going wrong here. Maybe (hopefully ;-) it's just some stupid
little error... ;-)
From the HISTORY file:
- Pressing the Play key during normal live viewing mode now opens the Recordings menu
if there is no "last viewed" recording (thanks to Alexander Wenzel).
The same behavior has been implemented for the Blue key in the main menu.
- cIoThrottle::Engaged() is now also checked in cRemoveDeletedRecordingsThread::Action(),
to suspend removing deleted recordings in case this is necessary to make room for
new, ongoing recordings (suggested by Udo Richter).
- The cThread constructor now has an additional boolean parameter that can be set to
true to have this thread run at a lower priority. Plugin authors that use low
priority threads may want to use this instead of the calls to SetPriority(19) and
SetIOPriority(7). The priority of a thread ("low" or "high") is now logged when the
thread starts.
- Changed DTV_DVBT2_PLP_ID to DTV_STREAM_ID in dvbdevice.c to adapt to an incompatible
change in DVB API 5.8 (reported by Derek Kelly).
Removed the meanwhile obsolete definition of FE_CAN_TURBO_FEC.
- Fixed some compiler warnings under gcc version 4.7.1.
- Fixed setting the video format in the dvbhdffdevice (thanks to Torsten Lang).
- Fixed 'make install' to not overwrite existing configuration files (thanks to Peter
Münster).
- Added including the Make.global and Make.config files to the dvbdhffdevice's
libhdffcmd/Makefile.
- Added options to build a 32-bit version of VDR on a 64-bit machine to
Make.config.template.
- Fixed handling VPS timers in case the running status of an event goes to '1' (not
running) and later goes to '4' (running).
- If a frame position in the 'marks' file of a recording doesn't point to an I-frame,
it will now be shifted towards the next I-frame, either up or down, whichever is
closer (suggested by Udo Richter).
- Fixed a possible memory leak in SI::StructureLoop::getNextAsPointer() (reported by
Sundararaj Reel).
- Fixed handling timers in case an event is modified and "phased out" while the timer
is recording.
- Improved frame detection by parsing just far enough into the MPEG-4 NAL units to get
the necessary information about frames and slices.
- The initial syncing of the frame detector is now done immediately after the first
complete GOP has been seen. This makes recordings and especially pausing live video
start up to twice as fast as before.
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Fixed handling the very last entry in a recording index.
- The return type of cMarks::Add() has been changed to void, since due to the sorting
of the list of marks the returned pointer might have pointed to a totally different
mark. Besides, the return value was never actually used.
- Improved editing TS recordings by
+ stripping dangling TS packets from the beginning of a sequence
+ including pending TS packets at the end of a sequence
+ fixing all timestamps and continuity counters
+ generating editing marks for the edited version in such a way that each cutting
point is marked by an "end" and "begin" mark with the same offset
+ no longer generating an editing mark at the "end" of the edited recording (this
was actually generated at the beginning of the last GOP, so that a subsequent
edit would have cut off the last GOP)
+ no longer generating any editing marks if the edited recording results on just
one single sequence
+ ignoring pairs of editing marks that are placed at exactly the same position of
a recording when actually cutting the recording
+ not doing anything if the editing marks in place would result in the edited
version being the same as the original recording
- Editing marks can now be placed directly on top of each other, in which case they
simply mark a position, but have no effect on the actual cutting process.
- When positioned at an offset where two (or more) editing marks are placed on top
of each other, the '4' key moves the first one of them to the left, while the '6'
key moves the last one of them to the right. The '7' and '9' key handle multiple
marks at the same place as if it were one single mark.
- Modified editing marks are now written to disk whenever the replay progress display
gets hidden (thanks to Christoph Haubrich).
|
||
|
Klaus Schmidinger
|
fa6845328c |
Version 1.7.31
VDR developer version 1.7.31 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.31.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.30-1.7.31.diff
MD5 checksums:
a3edd18a352465dd26c97c1990f7bcfd vdr-1.7.31.tar.bz2
32ff98697d1b383478a6e1932e4afc9c vdr-1.7.30-1.7.31.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The default skin "LCARS" displays the signal strengths and qualities of
all devices in its main menu. For devices that have an stb0899 frontend chip
(like the TT-budget S2-3200) retrieving this information from the driver is
rather slow, which results in a sluggish response to user input in the main
menu. To speed this up you may want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source.
The changes since version 1.7.30:
- If regenerating an index file fails and no data is written to the file, VDR now
reports this error and removes the empty index file.
- The setup parameter "Recording/Instant rec. time (min)" can now be set to '0',
which means to record only the currently running event (based on a patch from Matti
Lehtimäki).
- Decreased the ring buffer put/get trigger sizes from 1/3 to 1/10.
- The script given to VDR with the '-r' option is now also called whenever a
recording is deleted (thanks to Alexander Wenzel).
- Improved detecting frames in MPEG 4 video (reported by Andrey Pridvorov).
- cPatPmtParser::ParsePmt() now also recognizes stream type 0x81 as "AC3", so that
recordings that have been converted from the old PES format to TS can be played
(suggested by Jens Vogel).
- Fixed a leftover frame counter in the LCARS skin's replay display after jumping to
an editing mark and resuming replay.
- The new class cIoThrottle is used to allow I/O intense threads to temporarily
suspend their activities in case buffers run full (suggested by Torsten Lang).
Currently the cutter thread is suspended if the TS or Recorder buffer use more
than 50% of their capacity. Plugin authors may want to participate in this
mechanism if they use intense background I/O.
- Increased the size of the TS buffer to 5MB and that of the Recorder buffer to
20MB to better handle HD recordings (suggested by Torsten Lang).
- Moved cleaning up the EPG data and writing the epg.data file into a separate
thread to avoid sluggish response to user input on slow systems (based on a patch from
Sören Moch).
- Fixed sorting folders before recordings in case of UTF-8 (thanks to Sören Moch).
- Reactivated stripping control characters from EPG texts and adapted it to UTF-8.
- Added missing decrementing of 'len' in libsi/si.c's String::decodeText() functions.
- When checking whether a video directory is empty, file names that start with a
dot ('.') are no longer automatically ignored and implicitly removed if the directory
contains no other files. Instead, RemoveEmptyDirectories() now has an additional
parameter that can be given a list of files that shall be ignored when considering
whether a directory is empty. This allows users to continue to use files such as
".keep" to prevent a directory from being deleted when it is empty. Currently the
only file name that is ignored is ".sort".
|
||
Klaus Schmidinger
|
d34026c18b |
Version 1.7.30
VDR developer version 1.7.30 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.30.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.29-1.7.30.diff
MD5 checksums:
c6d75f2962bc3e22d9313c0ee4fa113a vdr-1.7.30.tar.bz2
a63098efcc58bc697d6b890097d9c370 vdr-1.7.29-1.7.30.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The default skin "LCARS" displays the signal strengths and qualities of
all devices in its main menu. For devices that have an stb0899 frontend chip
(like the TT-budget S2-3200) retrieving this information from the driver is
rather slow, which results in a sluggish response to user input in the main
menu. To speed this up you may want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source.
From the HISTORY file:
- Fixed sorting recordings in the top level video directory.
- Fixed handling control characters in SI data in case of UTF-8 encoded strings
(thanks to Mehdi Karamnejad for reporting a problem with garbled UTF-8 EPG data
and helping to debug it).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- When checking whether a video directory is empty, file names that start with a
dot ('.') are now ignored and will be implicitly removed if the directory contains
no other files. This fixes the leftover ".sort" files that were introduced in
version 1.7.29.
- Added IsUpdate() to the EPG handler interface (thanks to Jörg Wendel).
- Fixed detecting transfer mode on full featured DVB cards (thanks to Stefan Huelswitt
for reporting a problem with updating CA descriptors in such cases).
- Fixed a race condition when zapping in transfer mode (reported by Reinhard Nissl).
This involves a slight change in the semantics of the cReceiver::Activate() function,
which is now called with 'false' after the receiver has been detached from the
device.
- The new function cDevice::ReadFilter() can be used by devices to implement their
own way of retrieving section filter data (thanks to Deti Fliegl).
- The new function cDevice::HasInternalCam() can be implemented by devices that
provide encrypted channels in an already decrypted form, without requiring explicit
handling of a CAM (thanks to Tobias Grimm).
- VDR can now be built according to the FHS ("File system Hierarchy Standard") by
activating the line
#USEFHS = 1
in a copy of the file Make.config.template (thanks to Dennis Bendlin, as well as
Christopher Reimer and Udo Richter for contributing to the patch).
- By default (without FHS support) the config directory is now set to the value
given in the -v option if only -v and no -c is given.
- Fixed a long delay at the end when replaying a recording that has stopped recording
less than an hour ago (typically time shift mode or a freshly edited recording).
- Fixed getting the file size and number of frames of ongoing recordings (only the
timestamp of the recording's directory was checked, while it should have been that
of the index file).
- Fixed sluggish response when manipulating editing marks while a cutting thread
is running (reported by Torsten Lang).
- The new setup options "OSD/Color key [0123]" can be used to adjust the sequence
of the color buttons displayed in the menus to that of the color keys on your
remote control (based on a patch from Oliver Schinagl).
Authors of plugins that implement skins may want to adapt their SetButtons()
function in order to make use of this new feature. See, for instance, the function
cSkinClassicDisplayMenu::SetButtons() in skinclassic.c for details.
|
||
|
Klaus Schmidinger
|
046b506748 |
Version 1.7.29
Original announce message:
VDR developer version 1.7.29 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.29.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.28-1.7.29.diff
MD5 checksums:
a3f0ae42ba456aa1865c9ed065a64d80 vdr-1.7.29.tar.bz2
39db6b495210c293726126fbcba3e631 vdr-1.7.28-1.7.29.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The default skin "LCARS" displays the signal strengths and qualities of
all devices in its main menu. For devices that have an stb0899 frontend chip
(like the TT-budget S2-3200) retrieving this information from the driver is
rather slow, which results in a sluggish response to user input in the main
menu. To speed this up you may want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source.
From the HISTORY file:
- Added a missing template specification to the c'tor of cSortedTimers (thanks to Udo
Richter).
- Fixed the background color of the Transfer Mode indicator bitmap in the LCARS skin.
- The LCARS skin now only displays devices that can actually receive channels, leaving
out, for instance, pure replay devices (suggested by Reinhard Nissl).
- Now scaling down the Transfer Mode indicator bitmap in the LCARS skin in case it
doesn't fit with the selected font size (reported by Reinhard Nissl).
- Fixed making LCARS the default skin.
- Adjusted the default values for OSD and font sizes to better fit HDTV.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed the call to ChannelString() in cSkinLCARSDisplayChannel::SetChannel() (thanks
to Rolf Ahrenberg).
- Removed DeleteEvent() from the EPG handler interface (turned out not to be useful)
and replaced it with HandledExternally() (thanks to Jörg Wendel).
- Added SetComponents() to the EPG handler interface (thanks to Dirk Heiser).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Changed the button colors in the LCARS skin to better fit with the rest of the theme.
- Removed the gap from the main menu buttons in the LCARS skin.
- Fixed some copy&paste errors in PLUGINS.html (thanks to Winfried Köhler).
- The LCARS skin's main menu now only displays timers that are actually activated.
- Within the "Recordings" menu, pressing the '0' key now toggles sorting between
"by time" and "by name". The selected sort mode is stored separately for each
folder (provided you have write access to that folder).
If a folder is newly created by a repeating timer, the sort mode for that
folder is initially set to "by time".
- Fixed several spelling errors (thanks to Ville Skyttä).
- Fixed handling recording with more than two bonded devices.
- Fixed the type of MBperMinute in cVideoDiskUsage::HasChanged() (thanks to Andreas
Mair).
- Setting the "broken link" or "TEI" flags when cutting recordings is now suppressed
if the editing point merges two seamlessly fitting parts of the same stream (thanks
to Torsten Lang).
- Fixed displaying messages in the LCARS skin.
- Fixed checking for a visible live programme in case a menu or the channel display
is currently open.
- Changed some of the colors in the LCARS skin (you may need to delete the file
lcars-default.theme from your themes directory to see these changes).
- The new setup option "Miscellaneous/Show channel names with source" can be used to
turn on adding the source character to channel names whenever they are displayed
(suggested by Ludi Kaleni).
|
||
|
Klaus Schmidinger
|
5500959f4f |
Version 1.7.28
Original announce message:
VDR developer version 1.7.28 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.28.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27-1.7.28.diff
MD5 checksums:
3ccff2dcc42d112e23dd64f2c39f02f1 vdr-1.7.28.tar.bz2
7249ead4aca4b24e53d49d11c67e1613 vdr-1.7.27-1.7.28.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The new default skin "LCARS" displays the signal strengths and qualities of
all devices in its main menu. For devices that have an stb0899 frontend chip
(like the TT-budget S2-3200) retrieving this information from the driver is
rather slow, which results in a sluggish response to user input in the main
menu. To speed this up you may want to apply the patches from
From the HISTORY file:
- Fixed cPixmapMemory::DrawEllipse() for quadrants -1 and -4.
- Fixed getting the maximum short channel name length in case there are no short names
at all (reported by Derek Kelly).
- The new function cDevice::DeviceType() returns a string identifying the type of
the given device.
- Now limiting the number of characters of a channel's (short) name to 16 in the
schedules menus, to keep that column from getting overly wide in case there is
a channel with a very long name that has no short name.
- Fixed EPG scan on systems with only a single DVB device that use software output
(reported by Juergen Lock).
- Skins can now inquire the menu category for which their cSkinDisplayMenu is currently
being used. This can be done either through a call to cSkinDisplayMenu::MenuCategory()
or by reimplementing cSkinDisplayMenu::SetMenuCategory(). This information allows a
skin to use special icons or decorations for the various types of menus in VDR.
- The new setup option "DVB/Standard compliance" can be used to switch between different
variations of the DVB standard (thanks to Rolf Ahrenberg). Currently there is "DVB"
(for the original DVB standard) and "ANSI/SCTE", which is used to properly handle
certain private stream types.
- The disk usage is no longer automatically added to the title of the main and
"Recordings" menus. This has always been a mekeshift solution and it is now up
to the individual skin if, where and how it wants to display this information.
A skin can use the new cVideoDiskUsage class to implement such a display. For
compatibility, the default skins "Classic VDR", "ST:TNG Panels" and "Text mode"
(i.e. curses) have been changed to behave like before. Other skins may want to
display the disk usage in totally different ways.
- A cOsdMenu can now handle skins that display different numbers of items in the
various menu categories.
- OSD and skin are now reinitialized after a plugin setup page has been confirmed,
to have them react immediately in case any change to a plugin's setup parameter
has an effect on the OSD.
- The Timers list is now marked as modified whenever a recording starts or ends.
- Fixed cDevice::StillPicture(), making sure it doesn't call the derived class's
function if no buffer has been allocated (reported by Marcus Roscher).
- Fixed the SVDRP command UPDR, which didn't update the global recordings list
(reported by Lars Hanisch).
- cControl::Control() now has an additional boolean parameter, which can be set to
true to get the current player control even if it is hidden.
- The new functions cControl::GetRecording() and cControl::GetHeader() can be used
to retrieve information about what the current player is playing.
- Fixed a possible high CPU load when pausing replay (thanks to Reinhard Nissl).
- Fixed character comparisons in cSubtitleObject::DecodeCharacterString() (reported
by Reinhard Mantey).
- Renamed the function cString::sprintf(const char *fmt, va_list &ap) to vsprintf(),
because it might inadvertently be called with a 'char *' as the second argument on
some compilers and cause a crash (reported by Sundararaj Reel).
- Removed the "bondedMasterFailed" mechanism from cDvbTuner, because it caused
problems with the EPG scan in case a transponder is not receivable in a setup with
bonded devices (reported by Michael Schneider).
- Making sure setup strings don't contain any newline characters (thanks to Joachim
Wilke).
- The new member function cSkinDisplayReplay::SetRecording() allows a skin to display
more information about the currently played recording.
- Fixed a mismatched 'delete' in cSchedules::SetEpgDataFileName() (thanks to Reinhard
Mantey).
- The DrawText() functions of the OSD now accept the new alignment flag taBorder,
which triggers keeping a proper distance from the edge that taLeft or taRight
aligns to.
- Fixed checking for UTF-8 support in cFont::Bidi() (reported by Torsten Lang).
- If a recording has no info file, the 'title' of the recording's info is now set
to the recording's name.
- cVector::Clear() now reinitializes any previously used members.
- Fixed resetting CAMs (thanks to Marco Skambraks).
- The new function RgbShade() (include osd.h) can be used to generate a brighter or
darker version of a given color.
- The new class cSortedTimers can be used to quickly get a list of all timers, sorted
by their start time.
- The new skin "LCARS" is an enhanced version of the "ST:TNG" skin (which is still
there in its original layout, for those who don't like the LCARS skin, or can't use
it due to OSD limitations). The LCARS skin utilizes the new "menu category" feature
to display additional information on the main menu page. It shows upcoming timers
and the system's devices, as well as which device is recording which timers. The
upper pane of the main menu displays the programme data in live and replay mode,
and a progress bar. An indicator on the right side of the device list shows which
device is currently used for live viewing, and whether it is in transfer mode.
The individual device displays show the device number, the device type, which CAM
(if any ) is currently assigned to the device, and the signal strength and quality.
On the left side of the OSD there is a permanent display of the current date and
time, the disk usage and the system load.
"LCARS" is the new default skin of VDR. It requires at least a 4bpp (16 color) full
screen OSD, but you can still operate it if your OSD can handle only fewer colors
(in which case you may want to switch to the "ST:TNG" or "Classic VDR" skin).
- Finally removed the code marked with __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS
and LEGACY_CRECEIVER.
- Now making sure that the "small font" is never larger than the "osd font".
- Fixed font handling with fontconfig 2.9.0 or newer (thanks to Joerg Bornkessel).
- Extended the interface to the script that gets called for recordings, so that in
the "edited" case it also provides the name of the original recording (thanks to
Christian Richter).
- Added DeleteEvent() to the EPG handler interface, so that an EPG handler can trigger
deleting of an event (thanks to Christian Kaiser).
- Speeded up opening menus on systems with many (several thousands) of recordings, by
caching the information whether a recording is stored on the video directory file
system within the cRecording data (based on a patch from Torsten Lang).
|
||
|
Klaus Schmidinger
|
3df1b6d139 |
Version 1.7.25
Original announce message:
VDR developer version 1.7.25 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24-1.7.25.diff
MD5 checksums:
a3fd482a3dd8027706d4f32a88c6bd13 vdr-1.7.25.tar.bz2
f34adcdc0cdab378431d8946872d6b59 vdr-1.7.24-1.7.25.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- The fps value for channels where it differs from the default is now set correctly
when pausing live video.
- Increased the average character estimate for calculating tab positions in skins,
to better suit wide fonts (reported by Rudi Hofer).
- Fixed getting the subsystem ids of DVB devices in case they have been rearranged
via udev rules.
- Added several cTimer::Set...() functions (suggested by Alexander Rieger).
- Changed the return value of cTimer::SetFile() to 'void'.
- Revoked "Fixed a possible deadlock in time shift mode" because it caused trouble with
output on vdr-xine and dxr3, and also short glitches when replaying on any output
device.
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed handling subtitle color palettes on channels where subtitles appear
"word by word" (thanks to Rolf Ahrenberg).
- Fixed upscaling cBitmaps with anti-aliasing (thanks to Rolf Ahrenberg for reporting
a problem with color palettes in subtitles).
- Fixed getting the video aspect ratio for scaling subtitles.
- Removed the "PrimaryLimit". Old "full featured" DVB cards can be run with the
--outputonly option to avoid problems with recording high bandwidth channels.
Besides, with HDTV becoming ever more popular those cards are pretty much obsolete
by now (the TT S2-6400 has no problems recording and replaying high bandwidth
channels simultaneously). And, last but not least, people using software players
won't notice this change, anyway.
- Since cReceivers can have priorities between -99 and 99, the priority
for an unused device has been changed from -1 to -100.
- If the first event in a schedule has a table id of 0x00, any incoming EIT data for
that schedule from the DVB stream will be completely ignored. This way an external
EPG source can fill the schedules with EPG data that will not be messed up with
that from the DVB data stream. Note, though, that this means VDR can not do VPS
controlled recordings with such events!
- Added some typecasts to silence gcc compiler warnings (thanks to Rolf Ahrenberg).
- Fixed handling overlapping timers in case a VPS timer with higher priority needs
to interrupt a timer with lower priority.
- The code for the RCU remote control unit has been moved into a separate plugin
named "rcu".
The REMOTE=RCU option in the 'make' call for VDR is now obsolete.
The command line option --rcu is now obsolete. Use -Prcu instead. If you have
used --rcu with a device path, use -P"rcu -d<device>".
- Added support for automatically selecting subtitles when playing old PES
recordings made with the subtitles plugin (thanks to Anssi Hannula).
- Revised priority handling to allow receivers with a priority that is lower than
that of live viewing (with suggestions from Frank Schmirler):
+ An idle device (one that is not used for live viewing and has no receiver
attached to it) now has priority IDLEPRIORITY (-100).
+ An unused CAM slot now has priority IDLEPRIORITY.
+ The default priority of a cReceiver is now MINPRIORITY (-99).
+ A device that is used only for live viewing (no matter whether it's in Transfer
Mode or real live mode) now has priority TRANSFERPRIORITY (-1).
+ The function cDevice::Receiving() now returns true if there is any receiver
attached to the device. Its boolean parameter has no meaning any more.
+ The default value for the Priority parameter of the function cDevice::ProvidesChannel()
has been changed to IDLEPRIORITY.
- Added a Query parameter to cDevice::GetDevice(), so that devices can be queried
without side effects when zapping.
- Replaced min(max()) calls with the new function constrain().
- Fixed handling OSD color button texts in case a menu item has texts of its own
(reported by Rolf Ahrenberg). If a plugin creates derived cMenuEditItems that set
color button texts, these should not set the texts directly by calling
cSkinDisplay::Current()->SetButtons(), but rather call the new member function
cMenuEditItem::SetHelp().
- Moved the call to cStatus::MsgChannelSwitch(this, 0) to the beginning of
cDevice::SetChannel(), so that any receivers that have been attached to the
device by plugins may be detached before the final call to GetDevice().
This actually reverts "Only calling cStatus::MsgChannelSwitch() if a channel
is actually going to be switched or has actually been switched successfully"
which was made in version 1.1.10, so please report if this has any unwanted
side effects.
|
||
|
Klaus Schmidinger
|
59f0138a7d |
Version 1.7.23
Original announce message:
VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff
MD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2
2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in cRecordings::ScanVideoDir() (reported by
Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in case there are too many
link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of cSatCableNumbers (triggered by
Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in cDvbTuner::GetSignalQuality()
(triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph Haubrich).
- Added support for devices with more than one delivery system per frontend.
This requires a DVB driver with version 5.5 or higher that can handle the
DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery
system per frontend.
- Updated the Hungarian language texts (thanks to István Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR commands
at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters in stream component
descriptions with blanks (thanks to Torsten Lang for reporting a problem with
EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal (reported by Sundararaj
Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg).
- Added support for handling DVB-T2 transponders. This requires a DVB driver
with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks
to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes() in case of broken
TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case there are events
that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system runs with UTF-8 (suggested
by Torsten Lang).
- Added member functions Adapter() and Frontend() to cDvbDevice (suggested by
Rolf Ahrenberg).
- The parameters that are only used by "second generation" delivery systems (DVB-S2
and DVB-T2) are no longer written into channels.conf for "first generation"
delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative Index values.
- Added option -N to the msgmerge call in the Makefile, because fuzzy translation
mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be used to switch between
showing the total length or the remaining time of the recording that is currently
replayed.
- Fixed wrongfully displaying the length of a recording in the title of the replay
progress display.
- Fixed frozen live view with device bonding in case the bonded master is used for
live viewing (reported by Uwe Scheffler).
|
||
|
Klaus Schmidinger
|
5a28d99936 |
Version 1.7.22
Original announce message:
VDR developer version 1.7.22 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff
MD5 checksums:
b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2
868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't
return actual values (thanks to Luca Olivetti).
- The DiSEqC codes are now copied in the call to cDiseqc::Execute().
- VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on
the "unicable" patch from Lars Hanisch).
Since "Unicable" is a registered trademark and stands for only one of many
implementations of SCR, the following changes have been made compared to the patch,
which need to be taken into account by people who have set up their system using
the patch:
- The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr").
- The configuration file name has been changed from "unicable.conf" to "scr.conf".
- Updated sources.conf (thanks to Arthur Konovalov).
- The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans).
- Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks
to Rolf Ahrenberg).
- Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans).
- Fixed setting the start time of an edited recording (thanks to Christoph Haubrich).
- Temporarily switching free devices to transponders in order to have their running
status updated is now done by marking the devices as "occupied" for a certain
amount of time.
- The new setup options "LNB/Device n connected to sat cable" can be used to define
which DVB-S devices are connected to the same sat cable and are therefore "bonded".
This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly
set up their sat devices with the above options.
- Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä).
- Fixed several spelling errors (thanks to Ville Skyttä).
- The new SVDRP command UPDR can be used to trigger an update of the list of
recordings (thanks to Lars Hanisch).
- Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä).
- Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä).
- Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks
to Ville Skyttä).
- Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg).
- Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg).
- Fixed a crash with malformed SI data (patch from vdr-portal).
|
||
|
Klaus Schmidinger
|
7df66b0587 |
Version 1.7.20
Original announce message:
VDR developer version 1.7.20 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19-1.7.20.diff
MD5 checksums:
eda2911fff1715ba5b1482b20ad18188 vdr-1.7.20.tar.bz2
a8f5bcaf3294cc9fce87283a618d5ce1 vdr-1.7.19-1.7.20.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version contains functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
From the HISTORY file:
- Added some missing 'const' to tChannelID (reported by Sundararaj Reel).
- The isnumber() function now checks the given pointer for NULL (thanks to Holger
Dengler).
- Now checking Setup.InitialChannel for NULL before using it (reported by
Christoph Haubrich).
- cSkins::Message() now blocks calls from background threads (thanks to Michael
Eiler for reporting a crash in such a scenario).
- Fixed the return value of the svdrpsend.pl script in case of an error (thanks to
Jonas Diemer).
- Increased MAXCAIDS to 12 (thanks to Jerome Lacarriere).
- Fixed handling DiSEqC codes (thanks to Mark Hawes for reporting the bug, and
Udo Richter for suggesting the fix).
- Added a mechanism to defer timer handling in case of problems (reported by
Frank Niederwipper).
- Fixed distortions that happened when splitting recording into several files
(was a side effect of "Fixed detecting frames in case the Picture Start Code or
Access Unit Delimiter extends over TS packet boundaries" in version 1.7.19).
cRecorder::Action() now buffers TS packets in case the frame type is
not yet known when a new payload starts. This adds no overhead for channels
that broadcast the frame type within the first TS packet of a payload; it only
kicks in if that information is not in the first TS packet.
- Fixed handling the channelID in cMenuEditChanItem (thanks to Udo Richter).
- cStringList::Sort() can now be called with a boolean parameter that controls
case insensitive sorting (suggested by Sundararaj Reel).
- Now scanning new transponders before old ones, to make sure transponder changes
are recognized (thanks to Reinhard Nissl).
- Implemented static cIndexFile::IndexFileName().
- The length (as number of frames) of a recording's index file can now be determined
by a call to cIndexFile::GetLength() (suggested by Christoph Haubrich).
- Fixed some crashes in subtitle display (thanks to Rolf Ahrenberg).
- Made DELETENULL() thread safe (reported by Rolf Ahrenberg).
- The pic2mpg script of the 'pictures' plugin now generates HD images (thanks to
Andre Weidemann for his support in using convert/ffmpeg). The old SD version is
still available as pic2mpg-sd.
- Added a mutex to protect cOsd::Osds from simultaneous access from different threads
(reported by Rolf Ahrenberg).
- The cutter now sets the 'broken link' flag for MPEG2 TS recordings (thanks to
Oliver Endriss).
- Fixed language code entry for Portuguese.
- The new command line options --filesize (suggested by Marco Göbenich) and --split
can be used together with --edit to set the maximum video file size and turn on
splitting edited files at the editing marks. These options must be given before
--edit to have an effect.
- cTimeMs is no longer initialized to the current time if the value given to the
constructor is negative (avoids the "cTimeMs: using monotonic clock..." log message
before VDR's starting log message).
|
||
|
Klaus Schmidinger
|
bd61fee1e9 |
Version 1.7.19
Original announce message:
VDR developer version 1.7.19 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff
MD5 checksums:
1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2
db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version introduces functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
Since apparently the various frontend drivers return different maximum
values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some
deliver a value in the range 0x0000...0xFFFF, while others return values
as "dB/10" or "dBm/10" (the latter with an offset to make the value positive,
since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength()
and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to
map these values into the range 0...100, which is the normalized return
value of these functions.
Take a look at these two functions and maybe remove the comment characters
from the lines
//#define DEBUG_SIGNALSTRENGTH
//#define DEBUG_SIGNALQUALITY
in dvbdevice.c to get some debug output if your device doesn't return any
directly useful values and may have to be added appropriately to the
'switch (subsystemId)' statement.
The channel display of the 'sttng' skin uses these values to implement
a signal strength/quality display.
From the HISTORY file:
- Fixed cString's operator=(const char *String) in case the given string is the
same as the existing one (thanks to Dirk Leber).
- Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm).
- TsGetPayload() now checks if there actually is a payload in the given TS packet
(reported by Dirk Leber).
- Now sorting the source file names in the call to xgettext, to make sure the results
are not dependent on the sequence of the files.
Plugin authors may want to change the line containing the xgettext call in their
Makefile accordingly by changing "$^" to "`ls $^`".
- The primary device is now only avoided for recording if it is an old SD full
featured card. This is done through the new function cDevice::AvoidRecording().
- Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl).
- Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich).
The return value of cDiseqcs::Get() is now const, so plugin authors may need to
adjust their code if they use this function.
- The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be
used to determine the signal strength and quality of a given device (thanks to
Rolf Ahrenberg for some input on how to use BER and UNC values to generate a
"quality" value).
- The 'sttng' skin now displays two colored bars at the bottom of the channel display,
indicating the strength (upper bar) and quality (lower bar) of the received signal.
The number to the left of these bars indicates the actual device the current
channel is being received with.
- Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries (reported by Johan Andersson).
In order to fix this, the semantics of cFrameDetector had to be changed a little.
See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new
cFrameDetector::NewPayload() function.
- The frame detector now only starts collecting PTS values after it has seen the
first I-frame, otherwise it might get MaxPtsValues values and stop analyzing
even though the incoming data is still garbage (reported by Derek Kelly).
- The info file of a recording is now only overwritten with a new fps value if
that new value is not the default value (thanks to Derek Kelly for reporting a
problem with the fps value being overwritten in case a recording was interrupted
and resumed, and the fps value could not be determined after resuming recording).
- The initial channel is now stored by the channel ID in the setup.conf file, in
order to avoid problems in case channels are reordered or deleted (reported by
Lars Bläser).
- Added support for "content identifier descriptor" and "default authority descriptor"
to 'libsi' (thanks to Dave Pickles).
|
||
|
Klaus Schmidinger
|
c2c45d68c6 |
Version 1.7.15
- Added Macedonian language texts (thanks to Dimitar Petrovski). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added handling of EnhancedAC3DescriptorTag (thanks to Eric Valette). - The default SVDRP port is now 6419 (registered with ICANN/IANA by Christian Tramnitz). Use '-p 2001' to switch back to the old port if necessary. - Updated the Italian OSD texts (thanks to Diego Pierotto). - cDvbDevice::ProvidesTransponder() now checks the modulation capabilities of the device (as far as the driver allows this). - Fixed cFrameDetector::Analyze() in case part of the data has been processed and there is less than MIN_TS_PACKETS_FOR_FRAME_DETECTOR left (reported by Derek Kelly). - Added a note about not deleting cDeviceHook objects to device.h. - Added user defined key kUser0 (suggested by Ulf Kiener). - Include paths are now added instead of overwriting INCLUDES in the Makefile (thanks to Paul Menzel). - The various modulation types are now taken into account when selecting a device for a recording or live viewing, so that devices that provide more capabilities are spared. - Fixed generating PMT language descriptors for multi language PIDs (thanks to Rolf Ahrenberg). - Transponders that use "8psk turbo fec" (a non-standard mode used by North American providers) are now identified by assuming that all 8psk transponders on DVB-S use "turbo fec". In order to determine whether a certain device can handle "turbo fec", the new driver flag FE_CAN_TURBO_FEC is checked. If your device can handle "turbo fec", and your driver doesn't have that flag, yet, you can apply the patch from ftp://ftp.tvdr.de/vdr/Developer/v4l-dvb-add-FE_CAN_TURBO_FEC.diff. A temporary macro in dvbdevice.c defines the flag for all those who don't need this in the driver, so that they can continue using an unmodified driver. Thanks to Derek Kelly for testing this. - Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk). - Fixed handling "none" color entries in XPM files (thanks to Thomas Günther). - Fixed a crash when creating a new channel if the channel list is empty (reported by Halim Sahin). - Updated the Czech OSD texts (thanks to Radek Stastny). - Fixed a possible out of buffer memory access in case of bad TS data (reported by Rolf Ahrenberg). - Implemented handling of HD resolution subtitles according to v1.3.1 of ETSI EN 300 743, chapter 7.2.1 (thanks to Rolf Ahrenberg). - The EPG data now handles stream components 5 (H.264-video) and 6 (HEAAC-audio). - Fixed a problem with external Dolby Digital processing via the '-a' option in live mode and with TS recordings (reported by Christopher Reimer). - Added handling MPEG audio types "ISO/IEC 14496-3 Audio with LATM transport syntax" and "ISO/IEC 13818-7 Audio with ADTS transport syntax" (suggested by Luis Fernandes). See man vdr(5) on how the APID section of channels has been extended to store this information. - Added detecting channels that use service type 0x16. - Added full handling of the stream types of Dolby Digital pids (thanks to Jose Alberto Reguero). - The new setup option "OSD/Number keys for characters" can be used to control whether the number keys can be used to enter characters in a text input field (suggested by Stefan Huskamp). |
||
|
Klaus Schmidinger
|
1eb12b4973 |
Version 1.7.14
- Fixed handling empty strings in cSource::FromString(). - Assigned the source character 'I' to "IPTV" (suggested by Rolf Ahrenberg). - Assigned the source character 'V' to "Analog Video" (suggested by Lars Hanisch). This obsoletes the ANALOGTV patch. - Added support for ATSC devices (thanks to Alex Lasnier). This obsoletes the ATSC patch. - The "Source" item in the "Edit channel" menu now wraps around the list of sources (suggested by Halim Sahin). - Fixed editing channel parameters. - The new setup option "Recording/Delete timeshift recording" controls whether a timeshift recording is automatically deleted after viewing it. This obsoletes the DELTIMESHIFTREC patch. Note that the meaning of the values for this option is different from the DELTIMESHIFTREC patch: 0 means timeshift recordings are not automatically deleted (the default behavior as in previous versions), while 1 means to ask the user whether the recording shall be deleted. - Added cChannel::IsSourceType() to test if a channel's source is of a given type. - Changed the polarization characters in cDvbSourceParam::GetOsdItem() to uppercase. - The full timer file name is now displayed if it ends with "TITLE" or "EPISODE" (pointed out by Udo Richter). - Fixed "attempt to drop wrong frame from ring buffer" when skipping +/- one minute during replay. - The new setup option "Folders in timer menu" controls whether the file names in the timer menu are shown with their full folder path. |
||
|
Klaus Schmidinger
|
5ce592e54a |
Version 1.7.13
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Changed the position of Sirius 4 to S4.8E in sources.conf (thanks to Alexander Gross).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Moved the declaration of cMenuCommands to menu.h, so that plugins can use it.
- Added a note to the MANUAL, saying that adding new transponders only works if the
"EPG scan" is active (suggested by Halim Sahim).
- Improved handling frames at the beginning and end of a recording in cDvbPlayer for
devices with large buffers (thanks to Reinhard Nissl).
- Implemented cDeviceHook to allow plugins more control over which device can
provide which transponder (thanks to Reinhard Nissl).
- Implemented cDevice::GetCurrentlyTunedTransponder() (thanks to Reinhard Nissl).
- Moved strictly necessary Makefile options into Make.global, which is included
by all plugins (thanks to Paul Menzel). The Makefiles of existing plugins should be
modified like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2009/10/18 14:00:07 2.1
+++ PLUGINS/src/hello/Makefile 2010/02/06 14:50:03 2.2
@@ -18,7 +18,7 @@
### The C++ compiler and options:
CXX ?= g++
-CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
+CXXFLAGS ?= -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
### The directory environment:
@@ -26,6 +26,10 @@
LIBDIR = ../../lib
TMPDIR = /tmp
+### Make sure that necessary options are included:
+
+include $(VDRDIR)/Make.global
+
### Allow user defined options to overwrite defaults:
-include $(VDRDIR)/Make.config
------------------------------------------------------------
- Added device definitions to the diseqc.conf file format, so that certain satellite
positions can be limited to a given list of devices.
This obsoletes the SOURCECAPS patch.
- Keeping subtitles visible when pausing replay (thanks to Rolf Ahrenberg).
- Fixed adding new transponders in case there is only a single channel in the
channel list (reported by Halim Sahin).
- The file name in the "Timers" menu now shows only the base name of the recording
without the folder path (if any). Otherwise with long folder paths the actual
recording name was not visible at all.
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Exported some libsi functions (thanks to Lucian Muresan).
- Improved scalability of the default skins.
- Fixed the German translation of "Folder name must not contain '%c'!" (thanks to
Frank Schmirler).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Plugins can now define new sources. In order to implement this, the following
changes were made:
+ The transponder parameter string is no longer interpreted by cChannel, but rather
stored as is and used only by the respective device. That way plugins can use a
channel's parameter string to store arbitrary data (see vdr.5).
+ The new class cSourceParam can be used by plugins to define new sources, and to
implement OSD items that will be used in the channel editor for editing the source
specific parameters of a channel (see dvbdevice.c for an example of how this is
done for the default DVB devices).
+ Purely numerical values are no longer accepted in the 'source' parameter of a
channel.
This obsoletes the PLUGINPARAM patch.
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- cSafeFile::Close() now flushes the file (suggested by Stephan Austermühle).
- The option "Setup/DVB/Use Dolby Digital" now only controls whether Dolby Digital
tracks appear in the "Audio" menu. Dolby Digital is always recorded.
This obsoletes the DOLBYINREC patch.
|
||
|
Klaus Schmidinger
|
09a17d56e2 |
Version 1.7.12
- Changed the EVCONTENTMASK_* macros to enums and changed "mask" to "group". - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - The "Edit timer" menu can now set the folder for the recording from a list of folders stored in "folders.conf". - Updated the Italian OSD texts (thanks to Diego Pierotto). - If svdrphosts.conf contains only the address of the local host, the SVDRP port is opened only for the local host (thanks to Manuel Reimer). - Renamed 'runvdr' to 'runvdr.template' and no longer copying it to the BINDIR in 'make install' (thanks to Martin Dauskardt). - Added plain text error messages to log entries from cOsd::SetAreas() (suggested by Rolf Ahrenberg). - cPalette::ClosestColor() now treats fully transparent colors as "equal"; improved cDvbSpuBitmap::getMinBpp() (thanks to Matthieu Castet and Johann Friedrichs). - The new setup option "Miscellaneous/Channels wrap" controls whether the current channel wraps around the beginning or end of the channel list when zapping (thanks to Matti Lehtimäki). - Fixed determining the frame duration on channels where the PTS deltas jitter by +/-1 around 1800. - The PCR pid in generated PMTs is now set to the channel's PCR pid again. - Fixed determining the frame duration on channels where the PTS deltas jitter by +/-1 around 3600. - The PCR pid is now recorded for channels where this is different from the video PID. To facilitate this, the interfaces of cTransfer, cTransferControl, cRecorder and cReceiver have been modified, so that the PIDs are no longer given in separate parameters, but rather the whole channel is handed down for processing. The old constructor of cReceiver is still available, but it is recommended to plugin authors that they switch to the new interface as soon as possible. When replaying such a recording, the PCR packets are sent to PlayTsVideo() - The files "commands.conf" and "reccmd.conf" can now contain nested lists of commands. See vdr.5 for information about the new file format. |
||
|
Klaus Schmidinger
|
ea01358b3b |
Version 1.7.10
- Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed wrong bracketing in cChannel::SubtitlingType() etc. (thanks to Rolf Ahrenberg). - Fixed not logging changes for channels that have no number (reported by Timothy D. Lenz). - Changed the project's URLs and email to tvdr.de. - Added Lithuanian language translations (thanks to Valdemaras Pipiras). - Updated Chinese language texts (thanks to Nan Feng). - Only checking DVB_API_VERSION to be >=5 in order to stay compileable in case the DVB API version number is increased (the API claims to always be backward compatible). - Fixed saving terminal settings when running in background (thanks to Manuel Reimer). - Fixed cFrameDetector::Analyze() to handle video streams where the frame type is not detectable from the first TS packet of a frame. - Fixed writing the PCR pid into the PMT in cPatPmtGenerator::GeneratePmt() (reported by Rene van den Braken). - Added Slovakian language texts (thanks to Milan Hrala). - Fixed EntriesOnSameFileSystem() to avoid using f_fsid, which may be 0 (thanks to Frank Schmirler). - Fixed starting a recording at an I-frame. - Fixed generating the index for recordings from channels that put a whole GOP into one payload unit. - The index file for TS recordings is now regenerated on-the-fly if a recording is replayed that has no index. This can also be used to re-create a broken index file by manually deleting the index file and then replaying the recording (at least until the index file has been generated). - The cRingBufferLinear::Read() function now returns -1 and sets errno to EAGAIN if the buffer is already full. - Fixed handling DVB subtitles for PES recordings (thanks to Rolf Ahrenberg). - Added the audio id to the call of PlayAudio() in cDevice::PlayTsAudio() (thanks to Andreas Schaefers). - Fixed references to old *.vdr file names in MANUAL (reported by Arthur Konovalov). - Reverted "Removed limitation to PAL resolution from SPU handling" because it cause nothing but trouble. Besides, the core VDR doesn't use this, anyway. - Fixed the default value for "Pause key handling" in the MANUAL (reported by Diego Pierotto). |
||
|
Klaus Schmidinger
|
ab6f2ccf42 |
Version 1.7.8
- The name of the function cDevice::GetVideoSize() wasn't very well chosen for its purpose of defining the optimum size of the OSD for the current output device. Therefore a new function named cDevice::GetOsdSize() has been introduced (suggested by Rolf Ahrenberg). Plugin authors should implement this function in classes derived from cDevice, if they are able to replay video. cDevice::GetVideoSize() still exists and should return the actual size of the video material that is currently replayed. Note that because of the many possible aspect ratios for video material, the type of the Aspect parameter of GetVideoSize() has been changed to 'double', and the Aspect parameter in both functions is named differently, because it returns different values (suggested by Reinhard Nissl). Thanks to Oliver Endriss for his input on calculating the Aspect factor in GetOsdSize(). - Fixed the way the OSD size is determined on full featured DVB cards (thanks to Oliver Endriss). - Increased MAXOSDHEIGHT to 1200 (suggested by Nicolas Huillard). - Removed limitation to PAL resolution from SPU handling. - Checking fd_video in cDvbDevice::GetVideoSize() to avoid error messages on systems with no real primary replay device (reported by Martin Neuditschko). - Added a note to cTsToPes::GetPes() about having to call it repeatedly, once it has returned a non-NULL value. - Added MPEG 1 handling to remux.c (thanks to Ales Jurik). - Fixed use of time_t in cEIT::cEIT() (thanks to Tobias Bratfisch). - Added missing update of lastOsdSizeUpdate. - EIT events are now only processed if a plausible system time is available, to avoid wrong handling of PDC descriptors (thanks to Tobias Bratfisch). - Removed unused 'synced' member from cTsToPes (reported by Christoph Haubrich). - Added a note to cTsToPes about all TS packets having to belong to the same PID, and that for video data GetPes() may only be called if the next TS packet that will be given to PutTs() has the "payload start" flag set (suggested by Christoph Haubrich). - Added a note about the meaning of PERCENTAGEDELTA in cRingBuffer::UpdatePercentage() (thanks to Rolf Ahrenberg). - The new setup option "Recording/Pause key handling" can be used to define what happens if the Pause key on the remote control is pressed during live tv (thanks to Timo Eskola). - Added a note about cFont::GetFont() not being thread-safe. - Fixed generating PAT/PMT version numbers in case the PIDs change during recording (reported by Reinhard Nissl). - Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk). - Fixed a memory leak when reaching the end of a recording during replay (reported by Reinhard Nissl). - Fixed calling close(-1) in cUnbufferedFile::Close() (reported by Reinhard Nissl). - Added a workaround for the broken linux-dvb driver header files (based on a patch from Tobias Grimm). - Fixed handling the length of DiSEqC command sequences (reported by Reinhard Nissl). - Fixed cOsdMenu::Display() in case the menu size has changed (thanks to Reinhard Nissl). - Added some missing 'const' keywords to avoid compilation errors with gcc 4.4 (thanks to Ville Skyttä and Ludwig Nussel). - Modified cSVDRP::CmdGRAB() to avoid writing into const data (reported by Ludwig Nussel). - Fixed calculating menu colum widths in case the font has a size other than the default size (reported by Reinhard Nissl). - Added a plausibility check for the OSD percentage parameters to avoid problems in case the values are stored in the setup.conf file in a wrong way. - Fixed variable types in cIndexFile (reported by Udo Richter). |
||
|
Klaus Schmidinger
|
991eda0067 |
Version 1.7.7
- The new function cDevice::GetVideoSize() returns the size and aspect ratio of the video material currently displayed. This function is used to determine the proper size of the OSD. Plugin authors should implement this function in classes derived from cDevice, if they are able to replay video. - The OSD and font sizes are now defined in percent of the actual video display size. The maximum OSD size has been raised to 1920x1080, to allow full screen OSD on HD systems. - The OSD size is now automatically adjusted to the actual video display (provided the output device implements the GetVideoSize() function). - cFrameDetector::Analyze() now syncs on the TS packet sync bytes (thanks to Oliver Endriss for reporting broken index generation after a buffer overflow). |
||
|
Klaus Schmidinger
|
83d7a4b783 |
Version 1.5.16
- Fixed setting the current subtitle track in Transfer-Mode (reported by Petri Helin,
thanks to Reinhard Nissl for pointing out that cDevice::Transferring() doesn't
return the right value in the early stage of channel switching).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Updated the Dutch OSD texts (thanks to Carel Willemse).
- Fixed various spelling errors and improved PLUGINS.html (thanks to Ville Skyttä).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed the format in cRemote::Put() to use "%016llX" instead of "%016LX" (thanks
to Ludwig Nussel for pointing this out).
- Revised the fix of calculating the scrollbar height in the skins. The scrollbar
handle now always has a height that is at least the width of the scrollbar.
- When switching the device that's used for live viewing away from the current
transponder in favor of an upcoming recording, an attempt is now made to stay
on the current channel by possibly going into 'Transfer Mode'.
- The CAM menu now stays open as long as it is automatically updated, even without
pressing a remote control key. This is important when updating the CAM firmware
from the transponder.
- No longer trying to switch to an available channel if the primary device has
no valid programme and a menu is open (avoids interference with the CAM in
case a CAM menu is open).
- Increased the valid range of the "Subtitle offset" setup option to -100...100
(thanks to Rolf Ahrenberg).
- Added the backslash ('\') to the list of characters that need to be escaped
when executing external commands (thanks to Peter Bieringer for reporting this one).
|
||
|
Klaus Schmidinger
|
9279cb21cd |
Version 1.5.15
- Updated the Italian OSD texts (thanks to Diego Pierotto). - Added option -i to the pictures plugin's pic2mpg to ignore unknown file types. - Revoked the switch to the "multiproto" driver in order to make a new stable version before making this big switch and forcing all users to install a driver that is not yet in the kernel source. The removed code will reappear in version 1.7.0. Note that you may need to switch back to an older version of your channels.conf file if you have already used version 1.5.14, because it introduced new parameters. - Added the new command line option --userdump to enable core dumps in case VDR is run as root with option -u (thanks to Hans-Werner Hilse). - Speeded up anti-aliased font rendering by caching the blend indexes (based on a suggestion by Martin Wache). - Fixed setting the OSD area in the pictures plugin. - Ignoring "repeat" and "release" keys in the time search entry mode during replay, to avoid inadvertently leaving it in case a key is pressed too long (suggested by Andreas Brugger). - Improved sending all frames to devices that can handle them in fast forward trick speeds, including subtitles (thanks to Timo Eskola). - The section handler is now stopped before the device is destroyed, to avoid accessing file handles after they have become invalid (thanks to Reinhard Nissl for reporting an invalid access when ending VDR, and to Deti Fliegl for a patch that was used to implement StopSectionHandler()). - Fixed setting the date in the channel display of the classic and sttng skins, to avoid unnecessary OSD access (thanks to Marco Schlüßler). - The free disk space is now also displayed in the title of the "Recordings" menu (suggested by Walter Koch). - Changed the message "Upcoming VPS recording!" to "Upcoming recording!" because it applies to non-VPS recordings as well. - Fixed a loss of a timer's 'recording' flag after modifying it via MODT. - Fixed detecting directories in cFileNameList::Load(). - Running the thread that removes deleted recordings at a low priority to (maybe) avoid stuttering replay in case the thread is run during replay. - Limiting the length of the recording name in timers in case VDR is run with --vfat, in order to avoid names that are too long for Windows (suggested by Rolf Ahrenberg). - Using cString::sprintf() instead of asprintf() (thanks to Wolfgang Rohdewald for pointing out a possible problem if the return value is not checked). Plugin authors may want to consider doing the same. For convenience there is now an additional version of cString::sprintf() that accepts a va_list parameter. - When deleting the recording that is currently replayed, the replay is now stopped immediately (thanks to Mikko Matilainen for reporting a possible crash if the Info key is pressed after deleting the currently replayed recording). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - When determining the amount of free disk space, any deleted (but not yet removed) recordings on different file systems (that are mounted under the video directory) are no longer taken into account. - When running out of disk space during a recording, only such deleted or old recordings are removed, that actually are on the video directory file system(s). This prevents VDR from accidentally deleting recordings on other file systems, which would not add any free space to the video directory. - Implemented the cStatus, cDevice and cPlayer functions for setting subtitle tracks in plugins (thanks to Petri Hintukainen). - Added cStatus::TimerChange() to inform plugins about changes to the list of timers (based on a patch from Benedikt Elser). - Added new cStatus functions to the 'status' plugin. - Added missing #include <limits.h> to epg.c and menuitems.h (thanks to Ville Skyttä). - The new function cSkin::SetScrollbar() can be implemented by skins to display a scrollbar in every list menu. The 'classic' and 'sttng' skins have been changed accordingly, as well as the 'skincurses' plugin. - Introduced 'operator const void * ()' in cString to catch cases where operator*() should be used. - Fixed calculating the scrollbar sizes in the skins. |
||
|
Klaus Schmidinger
|
fc4c8740a7 |
Version 1.5.13
- Fixed the declaration of cSubtitleObject::Decode8BppCodeString() (thanks to Gregoire Favre). - The new setup option "Miscellaneous/Emergency exit" can be used to turn off the automatic restart of VDR in case a recording fails for some reason. - The kInfo key is now propagated to any open menu, so that it can react to it in a context sensitive manner (suggested by Andreas Brugger). If there is no menu open it will show the info of the current broadcast or replay. - cTimeMs now uses the monotonic clock, if available (thanks to Petri Hintukainen). - Fixed cVector::Clear() and cStringList::Clear(). - Added cString::Truncate(). - Fixed the "i18n:" target in the "newplugin" script, so that it can create the initial *.pot file. - Fixed handling the '-l' option. - Fixed error handling in cCuttingThread::Action() (thanks to Udo Richter). - Fixed a loss of the date display in the "classic" skin's main menu (reported by Andreas Brugger). - Added a missing setting of lastFreeMB in cMenuMain::Update() (reported by Andreas Brugger). - Added '-Wno-parentheses' to the compiler options in order to avoid silly compiler warnings for expressions like 'a || b && c', where GCC 4.3 wants to force the programmer to write 'a || (b && c)', while everybody knows that '&&' links stronger than '||' (reported by Tobias Grimm). - Updated the Hungarian language texts (thanks to István Füley). - Fixed displaying weekday names in the Schedule menu if the system uses UTF-8 (reported by Jiri Dobry). - The new plugin "pictures" implements a simple picture viewer. See PLUGINS/src/pictures/README for details. - The automatic shutdown is now suppressed if the remote control is currently disabled (suggested by Helmut Auer, implemented by Udo Richter). - Added a section about "Logging" to PLUGINS.html (suggested by Torsten Kunkel). - Enhanced the SVDRP command CLRE to allow clearing the EPG data of a particular channel (thanks to Benjamin Hess). |
||
|
Klaus Schmidinger
|
dbf38b7c68 |
Version 1.5.10
- Implemented handling DVB subtitles (thanks to Marco Schlüßler, and also to Pekka Virtanen for writing the subtitle plugin, which helped in implementing subtitle handling in VDR). - The new remote control key "Subtitles" can be used to bring up the list of available subtitles. - The new setup option "DVB/Subtitle languages" can be used to define the preferred languages for subtitles. - Fixed selecting the audio track when pressing Ok in the Audio menu (thanks to Marco Schlüßler). - Implemented display of DVB subtitles in live viewing mode. - Implemented subtitle track selection. - Implemented bitmap color reduction and shrinking to display subtitles even on devices that can't display the necessary number of colors. - Added compatibility mode for playback of recordings made with the subtitles plugin (with some help from Rolf Ahrenberg). - The new setup option "DVB/Subtitle offset" can be used to shift the location of the subtitles in the vertical direction. - The new setup options "DVB/Subtitle foreground/background transparency" define an additional level of transparency for the foreground and background color of subtitles. - Existing recordings made with the subtitle plugin can be given an 'X' record in their info.vdr file, so that subtitles can be automatically selected upon replay, according to the preferred language setup, as in X 3 03 ger deutsch (see vdr.5). Note that these entries need to be added in the proper sequence, so that they correspond with the actual track languages in the recording. - Now generating translation files without line numbers to avoid unnecessarily large diffs. Plugin authors may want to replace the -F option with --no-location in the xgettext and msgmerge calls in their Makefiles. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added a missing Channels.SetModified(true) call when deleting or moving a channel in the Channels menu (reported by Halim Sahin). - Fixed a missing '-' at the next to last line of SVDRP help texts (reported by Denis Knauf). - Added a missing SetVolumeDevice() call in cDevice::SetPrimaryDevice() (reported by Reinhard Nissl). - Fixed a crash when pressing Left while at the first character of a cMenuEditStrItem (thanks to Christian Wieninger). - Only creating a new cDvbOsdProvider in cDvbDevice::MakePrimaryDevice() if 'On' is true (i.e. this device is being made the primary device). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed handling reallocated memory in cCharSetConv::Convert() (reported by Udo Richter). - Fixed a new[]/delete mismatch in cMenuEditStrItem::LeaveEditMode() (thanks to Udo Richter). - Implemented sending all frames to devices that can handle them in fast forward trick speeds (thanks to Timo Eskola). - Updated the Hungarian language texts (thanks to Thomas Günther). - Fixed description of DeviceSetAvailableTrack() and cReceiver(), and added an example ~cMyReceiver() in PLUGINS.html (thanks to Marco Schlüßler). - Improved the description of where logging goes in the INSTALL file (thanks to Elias Luttinen). - Added a note about how to initiate internationalization support to the README.i18n file. The Makefile generated by the 'newplugin' script now has the 'i18n' target automatically create an initial 'po/pluginname.pot' file. Plugin authors may want to add the '$(I18Npot)' dependency to the 'i18n' target in their Makefiles, as in i18n: $(I18Npot) $(I18Nmo) (based on a suggestion by Torsten Kunkel). - Removed a duplicate ',' from the ca_ES.po file (thanks to Thomas Günther). - Added the 'ß' character to the "allowed characters" in the de_DE.po file (suggested by Thomas Günther). - Made the default copy ctor of cRecording private (thanks to Markus Hahn). Same for the assign operator. - Added cRecording::Undelete() (based on a patch from Markus Hahn). - Added cDevice::CloseFilter() to allow a device to have complete control over both opening and closing section filters (thanks to Rolf Ahrenberg). - Some fixes to PLUGINS.html (thanks to Rolf Ahrenberg). |
||
|
Klaus Schmidinger
|
a9c7f0de90 |
Version 1.5.5
- Fixed a name clash between skincurses.c and the new cOsd position functions. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Changed the parameter "OSD font size" to "Default font size" in "Setup/OSD". - Fixed handling address masks in SVDRP host settings (thanks to Frank Schmirler). - Fonts can now be created with a width that overwrites the default width (thanks to Andreas Mair). - Added full weekday names to i18n.c for plugins to use (thanks to Patrice Staudt). The new function WeekDayNameFull() can be used to get these names from integer values (just like the abbreviated weekday names). - Fixed stripping i18n stuff from font names (reported by Anssi Hannula). - Improved performance of the SVDRP commands LSTC and CHAN when used with a channel name. |
||
|
Klaus Schmidinger
|
b1e4da3be6 |
Version 1.5.4
- Increased APIVERSION (forgot to do that in 1.5.2 and 1.5.3). - Fixed a crash in i18n character set conversion (thanks to Alexander Riedel, Jose Alberto Reguero and Christian Wieninger for patches that cured part of the problem). - Adjusted the 'skincurses' plugin to UTF-8 handling. - Using nl_langinfo(CODESET) to determine the local codeset to use (thanks to Thomas Günther). The codeset names in 'libsi/si.c' have been changed to the canonical spelling with '-' (thanks to Ludwig Nussel for pointing this out). - Modified handling invalid characters in VFAT mode. - Replaced strn0cpy() with Utf8Strn0Cpy() where necessary. - Now using 'fontconfig' to determine which fonts to use (thanks to Anssi Hannula for code and hints on how to do this). - If no fonts are installed, VDR now uses a dummy font that doesn't actually draw any text, and logs an error message. - The new function cFont::CreateFont() can be used by plugins to create and use fonts of their own, independent of VDR's standard fonts. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Changed the parameter "OSD font" to "Default font" in "Setup/OSD" (suggested by Rolf Ahrenberg). - Fixed handling detached processes in SystemExec() (thanks to Udo Richter). - The info.vdr file now also stores the name of the channel, and the new function cRecordingInfo::ChannelName() returns this information if available (based on a patch from Alexander Hans). - The new function cOsd::SetOsdPosition() can be used to dynamically change the position and size of the OSD (based on a request from Christoph Haubrich). Plugins that implement skins should no longer use Setup.OSDWidth etc. directly, but should rather use cOsd::OsdWidth() etc. instead. Currently a change to the OSD position will only apply to newly opened OSDs. |
||
|
Klaus Schmidinger
|
b9b9ace9a8 |
Version 1.5.3
- Fixed some spelling errors in 'newplugin' (thanks to Ville Skyttä).
- Fixed a busy loop in fast forward if the next video data file is missing
(thanks to Reinhard Nissl).
- Fixed handling frequencies in NitFilter::Process() (thanks to Anssi Hannula).
- Fixed a race condition with signal handlers at program exit (thanks to Udo
Richter).
- Non-primary devices in Transfer mode are now also used for recording (thanks
to Anssi Hannula).
- Fixed handling ChannelUp/Down keys if there is currently a replay running
(thanks to Marco Schlüßler).
- The new SVDRP command REMO can be used to turn VDR's remote control off and
on in case other programs need to be controlled (based on patches from Krzysztof
Parma and Helmut Auer).
- Increased the maximum number of CA system ids to cope with the AlphaCrypt
CAM's version 3.11 firmware.
- Fixed getting the code setting from the locale (thanks to Matthias Schwarzott).
- Implemented support for Freetype fonts (based on a patch from Alexander Riedel).
The font names and sizes can be adjusted in the "Setup/OSD" menu.
Note that VDR now requires freetype fonts to be installed in
/usr/share/fonts/truetype.
- If the OSD device in use has at least 8bpp bitmap depth and this is also
used by the current skin, Freetype fonts are displayed "anti-aliased".
The new setup parameter "OSD/Anti-alias" can be used to turn this off.
- The new function cOsd::SetAntiAliasGranularity() can be used to help the OSD
in managing the available color palette entries when doing anti-aliasing.
Skins that use 8bpp bitmaps can call this function with the maximum number
of colors used, and the maximum number of color combinations. The OSD will
then evenly split the available palette entries between the various colors
combinations, so that fonts can be "anti-aliased". By default a total of
10 colors and 10 combinations is assumed.
- The pixel fonts have been completely removed from the VDR source.
- VDR is now "UTF-8 aware". It handles strings according to the character
encoding used on the user's system. All internationalization strings and
incoming SI data are converted to the system encoding.
- Plugins that handle strings need to be aware that on systems with UTF-8
encoding a "character symbol" may consist of more than a single byte in
memory. The functions and macros named Utf8...() can be used to handle
strings without needing to care about the underlying character encoding
(see tools.h for details).
- Even though the weekdays of repeating timers are presented to the user as UTF-8
characters in the OSD, the timers.conf file and the SVDRP timer commands still
use single byte characters ("MTWTFSS") to make sure this information is handled
correctly between systems with different character encodings.
- Added a missing i18n string for "CAM" in the Turkish OSD texts.
- Improved editing strings that are too long to fit into the editable area.
- Changes to the OSD settings in the "Setup/OSD" menu now immediately take effect
when the "Ok" key is pressed.
|
||
|
Klaus Schmidinger
|
9f42c33ef6 |
Version 1.5.1
- Added cDevice::HasCi() so that devices with Common Interface can be avoided when tuning to an FTA channel, thus preserving the CAM resources even on budget DVB cards (suggested by Petri Helin). - Fixed i18n characters for the Hungarian texts (thanks to Thomas Günther). - Now using cPipe instead of popen() in cCommand::Execute() to avoid problems with open file handles when starting background commands (thanks to Reinhard Nissl). - Removed 'assert(0)' from cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler). - Fixed a possible crash when loading an invalid XPM file (thanks to Martin Wache). - Updated satellite names in 'sources.conf' (thanks to Thilo Wunderlich). - Adapted 'libsi' to DVB-S2 (thanks to Marco Schlüßler). - Fixed handling error status in cDvbTuner::GetFrontendStatus() (thanks to Reinhard Nissl). - Shutdown handling has been rewritten (thanks to Udo Richter). - Plugins can now implement the new function WakeupTime() to request VDR to wake up at a particular time (thanks to Udo Richter). - The HUP signal now forces a restart of VDR (thanks to Udo Richter). - cThread::EmergencyExit() has been replaced by ShutdownHandler.RequestEmergencyExit(). - Several references to "button" in a remote control context have been changed to "key" (based on a report from Marko Mäkelä regarding the "Menu button closes" text). The "MenuButtonCloses" parameter in 'setup.conf' has therefore been renamed to "MenuKeyCloses", accordingly. This will result in an "unknown config parameter: MenuButtonCloses" error message in the log file, so you may want to remove that entry from your 'setup.conf' file. - Simplified the error handling in cDvbTuner::GetFrontendStatus() (based on a discussion with Reinhard Nissl). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Increased the maximum number of DVB devices to 8 (thanks to Rolf Ahrenberg). - The new Setup parameter "Channel entry timeout" can be used to customize the time since the last keypress until a numerically entered channel number is considered complete, and the channel is switched (suggested by Helmut Auer). Setting this parameter to 0 turns off the automatic channel switching, and the user will have to confirm the entry by pressing the "Ok" key. |
||
|
Klaus Schmidinger
|
66ab78a40f |
Version 1.5.0
- The CAM handling has been refactored. Instead of a cCiHandler per device there is now an abstract cCiAdapter and a cCamSlot. This allows each slot to be accessed individually. - The general 15 seconds workaround time before opening the CAM menu has been removed. If the CAM menu doesn't open within a timeout, the enter menu command is now sent again. - If a CAM is reset or pulled and reinserted, it now automatically starts decrypting the current channel again. - The Setup/CAM menu now dynamically refreshes its items and displays whether a CAM is present or ready. The 'Reset' function no longer leaves the menu. - The CAM menu will now be openend when pressing the Ok key on a slot entry. - The CAM menu now stays within the current menu context and doesn't close and reopen the menu every time an option is selected. - When an encrypted channel is switched to for the first time, VDR now checks explicitly whether a CAM can actually decrypt that channel. If there is more than one CAM in the system that claims to be able to decrypt the channel, they are all tried in turn. To make this possible, an encrypted channel needs to be received in Transfer Mode when it is switched to for the first time, so that VDR can determine whether the TS packets are actually decrypted. Once a channel is known to be decrypted by a particular CAM, the next time it is switched to it will be shown in normal live viewing mode. - A cDevice now automatically detaches all cReceiver objects that receive PIDs that can't be decrypted with the current CAM. A plugin that attaches a cReceiver to a device should therefore watch the receiver's IsAttached() function to see if it is still attached to the device. - The cReceiver constructor no longer takes an 'int Ca' as its first parameter, but rather a 'tChannelID ChannelID'. This is necessary for the device to be able to determine which CAM a particular channel can be decrypted with. If the channel is known to be unencrypted, or a plugin doesn't want to provide the channel id for other reasons, an invalid tChannelID() can be given. - The cThread::Start() function now waits until a previous incarnation of this thread has actually stopped. Before this it could happen that a thread's Cancel(-1) function was called and immediately after that it was started again, but the Start() function still found it to be 'active'. - The parameter NeedsDetachReceivers in cDevice::GetDevice(const cChannel *Channel, ...) has been removed. A call to this function will automatically detach all receivers from the device if it returns a non-NULL pointer. - The cTimeMs class now accepts an initial timeout value in its constructor. - A CAM is now explicitly instructed to stop decrypting when switching away from an encrypted channel. - If the CAM in use can decrypt several channels at the same time, VDR can now make use if this capability. Whether or not a CAM can decrypt more than one channel is determined by sending it an initial empty QUERY command and testing whether it replies to it. - Ca values in the range 0...F in channels.conf can still be used to assign a channel to a particular device, but this will no longer work with encrypted channels because without valid CA ids VDR can't decide which CAM slot to use. However, since VDR now automatically determines which CAM can decrypt which channel, setting fixed channel/device relations should no longer be necessary. IF AN ENCRYPTED CHANNEL CAN'T BE DECRYPTED AND YOU HAVE A CA VALUE IN THE RANGE 0...F FOR THAT CHANNEL, SET IT TO 0 (FTA) AND TUNE TO THE CHANNEL AGAIN. |
||
|
Klaus Schmidinger
|
56e5836b54 |
Version 1.3.49
- Fixed initializing 'noapiv' in the Makefile (reported by Ronny Kornexl). - Fixed extracting APIVERSION to work with older versions of 'sed' (reported by Oliver Endriss; thanks also to Udo Richter for a shorter version of the 'sed' expression). - Fixed broken APIVERSION extraction line in 'newplugin' (thanks to Oliver Endriss). - Fixed entering '0' in a cMenuEditIntItem (reported by Mirko Dölle). - Updated the Italian OSD texts (thanks to Nino Gerbino). - Added a note about adding 'INCLUDES += -I$(DVBDIR)/include' to an existing Make.config (problem reported by Markus Ehrnsperger). - Fixed handling the cPluginManager::Active() result when pressing the "Power" key (reported by Werner Färber). - Added a hint about commenting out the line '#define USE_FADVISE' in tools.c in case of problems with replaying in fast forward mode if the video directory is mounted via a Samba share (reported by Andy Grobb). - Changed the "Really restart?" prompt in the call to cPluginManager::Active() in menu.c to "restart anyway?" (suggested by Rolf Ahrenberg). - Removed the obsolete "'1' for encrypted radio channels" part from the description of the VPID in vdr.5 (reported by Alexander Hans). - Fixed tuning to the channel of a VPS timer if the device is the actual device. |
||
|
Klaus Schmidinger
|
880c3ddb94 |
Version 1.3.48
- Updated the GPL copies (thanks to Ville Skyttä). - Fixed several spelling errors (thanks to Ville Skyttä). - Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Updated the French OSD texts (thanks to Pierre Briec). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Fixed wrong credits for the patch that was used to implement cPlugin::Active(). - Simplified the 'grep|awk|sed' command to retrieve the VDR/APIVERSION to a single 'sed' call. - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Modified the German OSD texts to be "less technical" (thanks to Andreas Brachold). - Extended the version number reported with the '-V' option to also show the current APIVERSION (suggested by Thomas Günther). - Fixed handling empty titles in cEvent::FixEpgBugs() (reported by Rolf Ahrenberg). - Fixed some missing '-' in the German OSD texts (thanks to Walter Koch). - Added an error message about plugins that don't honor APIVERSION in their Makefile (based on a suggestion by Udo Richter). - Fixed a format string in recording.c to avoid a compiler warning on 64bit systems (thanks to Christian Wieninger for reporting, and Werner Schweer for pointing out that the 'z' modifier should be used here). - Ignoring k_Repeat when deciding whether the same key has been pressed in string input fields (based on a patch from Marko Mäkelä). |
||
|
Klaus Schmidinger
|
293ed4027e |
Version 1.3.47
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed a crash when setting the time transponder in the Setup menu, caused by the
new 'noneString' in cMenuEditChanItem (reported by Thomas Günther).
- Added NULL checks to some strdup() calls in menuitems.c (suggested by Darren
Salt).
- Removed the unnecessary 'value' member from cMenuEditItem.
- Fixed the initial setting of the time transponder setup parameter (reported
by Thomas Günther).
- Fixed unnecessary Set() calls in cMenuEditIntItem::ProcessKey().
- Allowing a tolerance for symbol rate values that are off by one (thanks to
Richard Lithvall).
- Added VBITeletextDescriptorTag, TeletextDescriptorTag, LocalTimeOffsetDescriptorTag
and PremiereContentTransmissionDescriptor to 'libsi' (thanks to Marco Schlüßler).
- Using geteuid() to check whether VDR is running as user 'root' (suggested by
Tobias Grimm).
- Added a missing "Key$" in skincurses.c (reported by Darren Salt).
- Reintroduced the log message "deleting plugin: ..." when shutting down VDR (upon
request by Ville Skyttä, as in the initial patch from Christoph Haubrich).
- Fixed the vdr.1 man page (a single DVB card can record and do live tv).
- The preferred audio language is now automatically selected when starting replay.
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The new function cPlugin::Active() can be used by a plugin to indicate that it
is still busy and the system should not shut down or restart (based on a patch
from Sascha Volkenandt). See PLUGINS.html for details.
- Fixed setting the 'Delta' parameter when calling the shutdown script with
no active timer (reported by Helge Lenz).
- In order to make sure that plugins are compiled with the same DVB driver header
files as VDR itself, the definition of DVBDIR has been removed from the VDR
Makefile. If you are using a driver version that has its header files at a location
other than /usr/include/linux/dvb, you can define DVBDIR in the Make.config
file (see also INSTALL). Note that if you already have a Make.config file of your
own, you should add the lines
ifdef DVBDIR
INCLUDES += -I$(DVBDIR)/include
endif
to its end, as in the new Make.config.template.
Any reference to DVBDIR should be removed from all plugins' Makefiles, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2005/11/11 13:20:14 1.10
+++ PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
@@ -20,7 +20,6 @@
### The directory environment:
-DVBDIR = ../../../../DVB
VDRDIR = ../../..
LIBDIR = ../../lib
TMPDIR = /tmp
@@ -40,7 +39,7 @@
### Includes and Defines (add further entries here):
-INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include
+INCLUDES += -I$(VDRDIR)/include
DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
------------------------------------------------------------
Thanks to Marco Schlüßler for pointing out this problem.
- Implemented kNext and kPrev keys (based on a patch from Peter Juszack).
See MANUAL for details.
- Implemented kChanPrev (from a patch from Darren Salt).
- The "Update channels" parameter in the "Setup/DVB" menu has been extended to
allow updating only the PIDs (see MANUAL for details). When updating to this
version of VDR, please verify that the setting is as you want it to be, because
the values have been shifted.
- The new APIVERSION (see config.h) now allows existing compiled plugins to be
used with newer versions of VDR, as long as there have been no changes to the
VDR header files since the last APIVERSION. Existing plugins' Makefiles should
have all references to VDRVERSION changed to APIVERSION, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
+++ PLUGINS/src/hello/Makefile 2006/04/16 09:03:50 1.12
@@ -28,9 +28,9 @@
-include $(VDRDIR)/Make.config
-### The version number of VDR (taken from VDR's "config.h"):
+### The version number of VDR's plugin API (taken from VDR's "config.h"):
-VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g')
+APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h)
### The name of the distribution archive:
@@ -67,7 +67,7 @@
libvdr-$(PLUGIN).so: $(OBJS)
$(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@
- @cp $@ $(LIBDIR)/$@.$(VDRVERSION)
+ @cp $@ $(LIBDIR)/$@.$(APIVERSION)
dist: clean
@-rm -rf $(TMPDIR)/$(ARCHIVE)
------------------------------------------------------------
- If a timer is newly created from within the "Schedule" menu, and its event is
already running or has its start time within the next two minutes, it now goes
directly into the "Edit timer" menu in order to allow the user to make further
changes to timer parameters before the actual recording starts (inspired by
Christian Wieninger's "epgsearch" plugin).
- Added format check to syslog_with_tid().
- Updated the INSTALL file's section about non-VDR files in the video directory
(since version 1.3.38 disk access is done in a separate thread, so the watchdog
timer won't hit).
- Changed the behaviour of the "Use small font" setup option to *always* use the small
font if set to '2' - even if it would have been a fixed font (suggested by Ronny
Kornexl).
- No longer using characters 0x01 and 0x02 for mapping single quote and slash in
recording names (thanks to Patrick Fischer for reporting that this was a problem
with XML). The single quote is not mapped at all, and the slash is interchanged
with the tilde. Existing recordings will be handled like before, so there is
no need to actually rename them.
- The cRemote::CallPlugin() function now has a boolean return value that tells
the caller whether initiating the plugin call was successful (suggested by
Reinhard Nissl). If it returns false, another plugin call is currently pending
and the caller should try again later. This also means that the SVDRP command
PLUG can now return an error code is the call fails.
- The new function cPlugin::MainThreadHook() can be used by plugins to perform
actions in the context of the main program thread. Use this function with great
care and only of you absolutely have to! See also PLUGINS.html.
|
||
|
Klaus Schmidinger
|
396d0ad367 |
Version 1.3.46
- Fixed handling broken PMT records (thanks to Marcel Wiesweg for pointing out how to detect these). - Added a missing "Button$" for the Timer button and "Key$" in skinclassic.c (thanks to Rolf Ahrenberg). - Fixed broken entry 'A111.1W' in sources.conf (reported by Luca Olivetti). - Replaced the obsolete entry 'S21.5E' in the default 'diseqc.conf' with 'S13.0E' (reported by Ville Skyttä). - Fixed learning keys when VDR is already running (thanks to Jurij Retzlaff). - Fixed handling the system time transponder setting in the Setup/EPG menu, which was broken by the min/max fix in cMenuEditIntItem. - VPS timers now record only events that have exactly the given start time. This fix also implements recording several subsequent events that have the same VPS time (like a sports event with intermittent news breaks). - When checking for timers that have entered the "VPS margin", any free devices are now used to switch to the needed transponder. This improves cases where more than one VPS timer is about to start. - Fixed handling the VPS margin in case the event's duration is shorter than the margin. - Fixed handling VPS timers in case the primary device needs to switch to the timer's transponder. - Now avoiding the 'actual' device when starting a recording, so that a Transfer Mode for live tv isn't interrupted. - Fixed a typo in skins.h (thanks to Alexander Rieger). - cSkins::QueueMessage() called from a background thread with an empty message now clears all messages that have been previously queued by that thread and have not yet beed displayed (thanks to Alexander Rieger). - Fixed handling the color button texts when switching from the 'Schedule' menu of a channel without EPG info to the 'What's on now' menu (reported by Rolf Ahrenberg). - cMenuEditIntItem and cMenuEditChanItem can now be given strings to label the minimum and maximum values, and the case that no channel has been selected, respectively. - The initial channel and volume can now be defined in the "Setup/Miscellaneous" menu (based on a patch from Thomas Keil). - When hitting the end of a recording in fast forward mode, VDR no longer switches back to normal speed if the recording is already finished (thanks to Reinhard Nissl). - No longer calling cPlugin::ProcessArgs() if VDR is run with the --help or --version option, to avoid error messages from plugins (reported by Udo Richter). - Now checking whether there is any text before calling cStatus::MsgOsdTextItem() (reported by Joachim Wilke). |
||
|
Klaus Schmidinger
|
9d12ac30f0 |
Version 1.3.44
- Fixed setting the audio language codes in 'Transfer-Mode' (reported by Rolf Ahrenberg). The actual problem was the call to the Transferring() function in cDevice::AttachPlayer() before assigning the player. - Fixed removing the '-' when entering a channel number where there is no other one that fits the input (thanks to Joachim Wilke). - Fixed the 'libsi' function CharArray::checkSize(), which made a previous workaround in libsi/descriptor.c obsolete (thanks to Marcel Wiesweg). - The "Ok" key in the "Jump" mode of the replay progress display now confirms the jump instead of closing the display (thanks to Christoph Haubrich). - The 'summary' field of a timer definition has been renamed to 'aux', and is now only used for external applications to store auxiliary information with a timer, which has no meaning whatsoever to VDR itself. The contents of the 'aux' field of a timer is copied into the recording's 'info.vdr' file, using the tag character '@'. - The description of a recording is now taken exclusively from its related EPG data. If an application wants to use a different description it needs to set it with SVDRP/PUTE and use table ID 0x00, so that it won't be overwritten (as a side effect, however, this also disables VPS for such an event). - There is no more "Summary" menu when pressing "Ok" in the "Timers" menu. The "Ok" key now always opens the "Edit timer" menu. - The upper 16 bit of a timer's "flags" are no longer treated specially when a timer is modified in the "Edit timer" menu. If an external application needs to know if a timer was modified, it has to keep a copy of the timer's data and compare that to the actual data. - The new function cRecordingInfo::ChannelID() can be used to retrieve the ID of the channel a recording was made from. - The 'info.vdr' file of a recording now also contains the 'E' and 'V' records of the EPG event used when creating it. - The option "Setup/OSD/Sort timers" has been removed. Timers are always sorted by their start time and priority. - The "Blue" key in the "Timers" menu now displays the EPG info of the event the selected timer will record (if available). The "On/Off" function has been shifted to the "Red" button. Editing a timer is done by pressing "Ok". - When determining which event a timer is going to record, all available events in the future are now taken into account (no more limit to 4 hours in the future). This has been done so that the event info is available in the "Timers" menu when pressing the "Blue" button. In order to avoid unnecessary work, each timer now has its own timestamp to control whether its schedule has changed since the last time its event has been set. - Fixed setting events to timers in case a non-VPS event has expired. - There is now a log message "timer ... set to event ..." when defining a timer from the EPG menu. - Lines tagged with '#' in the 'info.vdr' file of a recording are now silently ignored when reading that file (suggested by Peter Bieringer). Such lines can be used by external tools to store arbitrary information. - The 'event id' in EPG data has been extended to 32 bit, so that external tools can generate ids that don't collide with those from the DVB data stream (suggested by Matthias Schniedermeyer). - The DrawBitmap() function now has a new parameter 'Overlay' that allows a bitmap to be drawn with a transparent background (thanks to Alexander Hans). - Fixed cSchedule::GetFollowingEvent() in case there is currently no present event running (thanks to Pekka Mauno). |
||
|
Klaus Schmidinger
|
78e3da813c |
Version 1.3.39
- The SVDRP command LSTT now accepts the new option 'id' to have the channels of the timers listed with their unique channel ids instead of their numbers (suggested by Matthias Schniedermeyer). - Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä). - Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks to Andreas Brachold). - Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence() (thanks to Peter Bieringer). If you are using the PC keyboard as remote control input you may need to make VDR newly learn the keys by removing the remote.conf file. - To avoid problems with access rights when VDR shall run as 'root' it now skips all SetCaps() and SetUser() calls when it is started as 'root' and "-u root" is given. - Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä) - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Making the "Menu" key behave consistently has not been well received by several users, so the new option "Setup/OSD/Menu button closes" can be used to get the old behavior back (which also is the default value of this option). - Dropped the default vdr user. The program now always runs under the user id it was started from, unless the '-u' option is given and it was started from the 'root' user. If you want to have a default vdr user, you can activate and adjust the "VDR_USER = vdr" line in your Make.config file (from the original patch by Ludwig Nussel). - Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle). - Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism introduced in version 1.3.32. - Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä). - Added missing description of L and R circular polarization to 'diseqc.conf'. - Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko). - Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path names (thanks to Stefan Huelswitt). - Added a missing '-' to the example for viewing a grabbed image on a remote host (reported by Philippe Gramoullé). - Made the "What's on now/next?" menus a lot faster by storing a pointer to each channel's schedule in the cChannel data. - Made the log messages regarding lost lock of devices "info" instead of "error" (suggested by Andreas Brachold). - The SVDRP command GRAB allows file names without extension again (suggested by Stefan Huelswitt). - Pressing '0' in the "Schedule" menu now rotates through displaying "This event on this channel", "This event on all channels" and "All events on all channels". This can be used to find reruns of a given show, or the episodes of a series. Note that if there are many channels in your channels.conf, displaying the "All events on all channels" page may take a while. - The status markers in the "Schedule" menu are now only updated if a submenu is closed in which a timer has been modified, which speeds up closing submenus. - Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording if Setup.UseDolbyDigital is true (suggested by André Weidemann). - Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf Ahrenberg). - No longer displaying color buttons in the recording info menu if it has been invoked from a player (reported by Jürgen Schilling). |
||
|
Klaus Schmidinger
|
da948a50d2 |
Version 1.3.38
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
(was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
recordings that have been "deleted" but not yet actually "removed" is now
taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
a deleted recording is retained at least DELETEDLIFETIME seconds before
actually removing it.
The value of DELETEDLIFETIME has been changed to 300. So after (possibly
inadvertently) deleting a recording, there will be at least 5 minutes
in which it can be recovered (unless a new recording immediately requires
the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
(thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
now immediately creates a timer for the selected event and marks it with 'T'.
If the event is already marked with 'T', the "Red" button opens the "Edit
timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
file, but rather returns a pointer to the image in memory. The wrapper
function cDevice::GrabImageFile() can be used to write the grabbed image
directly to a file. Plugins that used the old version of cDevice::GrabImage()
need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
(encoded in base64) if the given file name consists of only the file
extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
name (based on a suggestion from Darren Salt).
A simple way of viewing a grabbed image on a remote host is:
svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -
- The new command line option '-g' must be given if the SVDRP command GRAB
shall be allowed to write image files to disk. The parameter to this option
must be the full path name of an existing directory, without any "..", double
'/' or symlinks. By default, or if "-g- is given, grabbing to files is
not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
Peña):
+ The file handle is now opened in a way that it won't follow symbolic links
(suggested by Darren Salt).
+ The given file name is now canonicalized, so that it won't contain any
".." or symlinks (suggested by Darren Salt).
+ Grabbing to files is limited to the directory given in the the command
line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
keeping the capability to set the system time (based on a patch from Ludwig
Nussel). By default the user id 'vdr' is used, which can be changed through
the new command line option '-u'. Note that for security reasons VDR will no
longer run as user 'root' (unless you explicitly start it with '-u root',
but this is not recommended!). The 'runvdr' script has been changed to
use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
so that they can provide the full file name of the recording. Plugins that use
these (or the related cStatus::Msg...() functions) need to be adapted
(suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
off the automatic timeout of the channel display in case it was invoked by
a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
Helmut Auer). Actually the code was already there, just commented out - don't
remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
several reports that it causes more problems than it solves (suggested by
Petri Hintukainen). If you want to use "fadvise", you can activate the line
//#define USE_FADVISE
in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
with the given number (see MANUAL, section "Remote Control Keys", note (3) for
details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
this is a menu.
- The new "Info" key brings up information on the currently viewed programme
or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
description of the current EPG event. For a recording this is the same as shown
by the "Info" button in the "Recordings" menu. Plugins that implement players
can overwrite their cControl::GetInfo() function to show their own info (see
PLUGINS.html for details). Pressing the "Info" key again while the info is
displayed will close the OSD. In order to assign this new key to an existing
remote control setup, the remote.conf file needs to be deleted and VDR has
to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
different transponder are now automatically detached (suggested by Patrick
Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
can now be entered by pressing the numeric keys, the same way as on a
telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
from "single shot" to "weekly", followed by the "Right" key (reported by
Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
(thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
Schneider).
- Cleaned up some trailing white space.
|
||
|
Klaus Schmidinger
|
d5c85f5ff8 |
Version 1.3.32
- Added some missing braces in remux.c (thanks to Wayne Keer for reporting this one). - Removed unused MAINMENUENTRY from svdrpdemo.c (thanks to Udo Richter for reporting this one). - Fixed appending sequence end code in cDvbPlayer::Goto() (thanks to Reinhard Nissl). - Fixed syncing in cRepacker (thanks to Reinhard Nissl). - Now always using stream id 0xE0 for the video stream, to avoid problems with post processing tools that choke on different ids (suggested by Reinhard Nissl). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cDvbPlayer::SkipFrames() to properly handle radio recordings (thanks to Reinhard Nissl). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Made LIRC command parsing more robust (thanks to Ville Skyttä). - Introduced a separate 'plugins-install' target in the Makefile (thanks to Daniel Thompson). - Re-introduced the code that waits for a tuner lock in VDR/device.c, since apparently some users actually need it. It's not active by default, you'll have to define the WAIT_FOR_TUNER_LOCK macro in that file if you need it (suggested by Malcolm Caldwell). - Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up (thanks to Lauri Tischler). - Repeat keys are now ignored when waiting for a keypress to cancel an operation (thanks to Marko Mäkelä). - The main menu function of a plugin can now be activated through a key macro of the form "@plugin" even if that plugin doesn't have a main menu entry (using part of a patch by Hardy Flor, which originally implemented calling plugins from SVDRP). - The menu timeout handling is now done centrally in the main program loop. - Added missing help for the 'help' keyword in the SVDRP command PLUG. - The main menu function of a plugin can now be called programmatically through the static function cRemote::CallPlugin(). - The SVDRP command PLUG now has a new option 'main' which can be used to initiate a call to the main menu function of a plugin (using part of a patch by Hardy Flor). - The new command line option '--vfat' can be used to make VDR encode special characters in recording file names, even if it wasn't compiled with VFAT=1 (suggested by Peter Bieringer). The compile time option VFAT still exists and creates a VDR that always behaves as if it were called with '--vfat'. - Replaced the ':' delimiter between hour and minute in recording file names with a '.' under Linux, too. Existing recordings with ':' as delimiter will still work. - Implemented the SVDRP command MOVC (thanks to Andreas Brachold). - Added support for multiple audio language codes in ISO639LanguageDescriptors to 'libsi' (thanks to Marcel Wiesweg). - Changed the audio PID language codes to hold up to two 3 letter codes, separated by '+', to store separate languages broadcast in two channel audio mode. - If the preferred audio language is broadcast on a PID that has two different languages in the two stereo channels, the audio channel is now properly set when switching to such a channel (thanks to Mogens Elneff for his help in testing this). - Fixed some typos in MANUAL (thanks to Ville Skyttä). - Fixed the default value for "Setup/EPG bugfix level" (thanks to Ville Skyttä for reporting this one). - Fixed defining timers that only differ in the day of week (thanks to Patrick Rother for reporting this one). - Fixed converting summary.vdr files that would result in a very long 'short text' (thanks to Carsten Koch). - Implemented a hash for the channels to reduce the system load in the EIT scanning thread (based on a patch by Georg Acher). |
||
|
Klaus Schmidinger
|
ddd1e13e53 |
Version 1.3.29
- Fixed a race condition in cTransfer (thanks to Klaus Heppenheimer for reporting this one). In doing so, the 'active' variables used by the actual derived cThread classes have been replaced by the cThread::Running() function. Plugin authors may want to check their derived cThread classes and replace any 'active' variables the same way as, for instance, done in transfer.c. - Fixed handling EPG data for time shifted events (thanks to Marco Schlüßler). - Increased the default value for 'Min. user inactivity' to 300 minutes (suggested by Helmut Auer). - Now storing the channel id in the info.vdr file even if there is no EPG info available (thanks to Andreas Brachold for reporting that there are empty info.vdr files created in that case). - Added some 'mkdir -p' to the Makefile's 'install' target (thanks to Wayne Keer). - Changed the title of the recording info menu (thanks to Rolf Ahrenberg). - Fixed handling the frame number display if '7' is pressed before the first editing mark, or '9' after the last one (thanks to Thomas Günther). - Now discarding any previous numerical input to switch channels if Up, Down, Channel+, Channel-, Left or Right is pressed (thanks to Wolfgang Rohdewald for reporting a problem with this). - Pressing Ok while entering a channel number now immediately switches to that channel, without waiting for further input. - Avoiding unnecessary OSD draw operations caused by the audio track description display in the ST:TNG skin's channel display (thanks to Oliver Endriss for reporting this). - Removed the VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES stuff from cDvbDevice::StillPicture(), since apparently the VIDEO_STILLPICTURE call works. |
||
|
Klaus Schmidinger
|
fef3aa3a7f |
Version 1.3.27
- Fixed handling 'page down', which was broken in version 1.3.26 (thanks to Udo Richter). - Modified page scrolling behaviour (based on a suggestion by Patrick Gleichmann). - The new setup option "OSD/Scroll wraps" can be used to activate wrapping around in menu lists (based on a suggestion by Patrick Gleichmann). - Removed the NPTL check at startup, since several users have reported that VDR now runs fine with NPTL. - Fixed handling VPS timers, so that they only record if the event they are assigned to actually has the given VPS time. - Disabled cVideoRepacker in remux.c, because it has caused several problems during recording. If you want to test (and maybe debug) it, activate the line //#define TEST_cVideoRepacker in remux.c. - When drawing a bitmap to the OSD, the existing palette of the target can now be replaced with the new one instead of adding the new entries (thanks to Andreas Regel). |
||
|
Klaus Schmidinger
|
f836711024 |
Version 1.3.25
- Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Some cable providers don't mark short channel names according to the standard, but rather go their own way and use "name>short name". VDR now splits at this character for cable channels (thanks to Gerhard Steiner for reporting this one). - Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael Reinelt for reporting this one). - Made the Makefile patch friendlier (thanks to Ludwig Nussel). - Made cOsd::isOpen an integer counter to avoid problems with messages when a cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one). - Updated the Danish OSD texts (thanks to Mogens Elneff). - The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the information about a recording, in the same format as the events are stored in 'epg.data' (see man vdr(5) for details). Existing summary files can be converted to the new format by running the Perl script 'summary2info.pl', as in summary2info.pl /video (the parameter given has to be the video directory). If there is no 'info.vdr' file for a recording, an attempt is made to read a 'summary.vdr'. - The "Summary" button in the "Recordings" menu has been renamed to "Info", and the page it brings up now shows the recording's information, much like the EPG event page. Therefore it now no longer uses the skin's SetText() function, but rather the SetRecording() function. Skin plugins may need to adjust that function accordingly (see skinsttng.c, for instance). - The SVDRP command LSTR now lists the recording information in the same tagged format as the LSTE command lists the EPG data. - The audio track menu now contains track descriptions when replaying (provided such descriptions were available in the EPG data when the recording was made, and are stored in the info.vdr file). - Avoiding extra blanks at the end of names of instant recordings. - Removed converting byte order on big endian systems from cDvbOsd::Flush(), which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong. - Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler). - No longer saving the setup in case of a fatal error, to keep the volume level from being set to a wrong value (thanks to Marco Schlüßler). - Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp() is waiting (thanks to Marco Schlüßler). - The SVDRP command DELR no longer deletes recordings that are currently being written to by a timer (thanks to Sascha Volkenandt for pointing out this one). - Pressing the "Play" key in live viewing mode now resumes a previous replay session (thanks to Mirko Dölle). - Now dropping EPG events that have a zero start time or duration (thanks to Oliver Endriss). - No longer stopping Transfer Mode or replay immediately when the Power button is pressed (thanks to Rolf Ahrenberg). - Moved the NPTL and UTF-8 checks after the version and help output (thanks to Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system). - Made tChannelID::operator==() inline for better performance (thanks to Georg Acher). - Introduced cListBase::count for better performance (thanks to Georg Acher). - cEvent no longer stores the channelID directly, but rather has a pointer to the schedule it is in. - Now using hash tables to speed up cSchedule::GetEvent() (partially based on a patch from Georg Acher). - Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the '& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher). - Speeded up deleting duplicate channels. - Fixed listing recordings with empty episode names in the LSTR command (thanks to Stefan Huelswitt for pointing this out). - Added cThread::SetPriority() and using it in cSectionHandler::Action() to reduce the priority of the section handler threads (as suggested by Georg Acher). |
||
|
Klaus Schmidinger
|
782b517c51 |
Version 1.3.23
- The setup option "DVB/Video display format" is now only available if "Video format"
is set to "4:3" (suggested by Mikko Salo).
- Updated the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Dropped CA support for the old '-icam' firmware.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the Swedish OSD texts (thanks to Tomas Prybil).
- Fixed a few French OSD texts that were in the wrong place.
- Improved matching timers to EPG events, especially in case there are several events
with the same VPS time.
- Fixed cDolbyRepacker to allow recording ProSieben HD broadcasts (thanks to Reinhard
Nissl).
- Fixed cDvbDevice::SetVideoDisplayFormat() in case of 16:9 (thanks to Marco Schlüßler).
- The running status of a VPS event is now only taken seriously if that event has been
seen within the last 30 seconds - otherwise recording is done as if no VPS was
available.
- The day of a timer is now stored as a full date in ISO notation ("YYYY-MM-DD") in
'timers.conf' and for the result of the SVDRP command LSTT (based in parts on a
patch by Roman Krenický).
- Some fixes to avoid compiler warnings in gcc 4.0 (thanks to Ville Skyttä for reporting
these).
- Single shot timers are now reliably deleted when they have expired.
- Fixed setting the colored button help after deleting a recording in case the next
menu entry is a directory (thanks to Steffen Beyer).
- Improved falling back to normal recording if the VPS data hasn't been seen for more
than 30 seconds.
- Added a missing cMutexLock to cRemote::HasKeys() (thanks to Wolfgang Rohdewald).
- All log entries regarding timers now contain a short description of the timer.
|
||
|
Klaus Schmidinger
|
05402c7407 |
Version 1.3.22
- Removed some unneeded code and fixed access to unallocated memory in
cEvent::FixEpgBugs() (thanks to Wolfgang Rohdewald).
- Avoiding unnecessary calls to SetPid() in cDvbDevice::SetAudioTrackDevice()
(thanks to Marco Schlüßler).
- No longer calling EnsureAudioTrack() in cDevice::SetChannel() if a Transfer Mode is
started, to avoid setting the audio PID on the primary device (thanks to Marco
Schlüßler for pointing this out).
- Replaced the call to system("sync") in SpinUpDisk() with fdatasync(f) to avoid
problems on NPTL systems (thanks to Chris Warren for pointing this out).
- Increased POLLTIMEOUTS_BEFORE_DEVICECLEAR in transfer.c to 6 to avoid problems
with the larger buffer reserve (thanks to Marco Schlüßler).
- Fixed the call to SetVideoFormat() in cDvbDevice::cDvbDevice() (parameter is _bool_).
- Added support for setting the video display mode (thanks to Marco Schlüßler).
- The new setup option "DVB/Video display format" can be used to define which display
format to use for playing wide screen video on a 4:3 tv set.
- Changed MAXDPIDS to 16 (8xAC3 + 8xDTS) (thanks to Werner Fink for pointing this out).
- Completed Dutch language texts (thanks to Hans Dingemans).
- Added 'smi' to the Finnish language codes (thanks to Rolf Ahrenberg).
- Fixed ensuring there is a current audio track in case there is only one track
(thanks to Werner Fink for reporting this one).
- Improved automatic audio track selection.
- Keeping the track language codes and descriptions in Transfer Mode (thanks to
Luca Olivetti).
- Fixed handling repeated kAudio keys.
- Improved displaying the the current audio track in the ST:TNG channel display.
|
||
|
Klaus Schmidinger
|
4d477cd144 |
Version 1.3.20
- Fixed displaying the "Audio" menu with the "Green" button from the "Main" menu in case there is only one audio track (thanks to Sascha Volkenandt for reporting this one). - Now setting primaryDevice = NULL before deleting the devices in cDevice::Shutdown() to avoid problems in case other threads access it (thanks to Wolfgang Rohdewald for pointing this out). - Fixed a buffer overflow in case a station defines all 32 audio PIDs (thanks to Christian Jacobsen for reporting this one). - Fixed masking SubStreamType in cDevice::PlayPesPacket() (thanks to Werner Fink for pointing out this one). - The new function cPlugin::Stop() shall be used to stop any background activities of a plugin. Previously this was done in the plugin's destructor, but it is better to do this in a dedicated function that can be called early when shutting down. - Moved the call to SetAudioChannel(0) into cDevice::ClrAvailableTracks() to have it executed also when starting a replay. - Completed the Danish OSD texts (thanks to Mogens Elneff). - Completed the French OSD texts (thanks to Olivier Jacques). - The new setup option "OSD/Channel info time" can be used to define the time after which the channel display is removed if no key has been pressed (thanks to Olivier Jacques). - Modified cDolbyRepacker to make sure PES packets don't exceed the requested length (thanks to Reinhard Nissl). - Fixed several memory leaks that were introduced through the use of cString (thanks to Stefan Huelswitt for reporting these). - Added CMD_SPU_CHG_COLCON to cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler). - Making sure the current audio track is actually one of the ones available in a recording (thanks to Sascha Volkenandt for reporting a problem when starting replay of a recording that has no Dolby Digital audio after switching to a channel that has DD and selecting the DD audio track). - Removed 'flags' from tTrackId (thought we would need this, but apparently we don't). - Making sure the "Mute" and "Volume+/-" keys don't interfere with digital audio. - Fixed the "pre 1.3.19" compatibility mode for old Dolby Digital recordings (thanks to Werner Fink for pointing out that this can be triggered in the default branch). - Calling pesAssembler->Reset() in cDevice::AttachPlayer() to avoid problems with residual data in replay and Transfer Mode (thanks to Werner Fink for pointing this out). - Added MPEG1 replay capability to cPesAssembler (thanks to Stefan Huelswitt). |