107 Commits

Author	SHA1	Message	Date
Klaus Schmidinger	3e4e4454fc	Version 2.1.6 ... VDR developer version 2.1.6 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.6.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.5-2.1.6.diff MD5 checksums: 79519dac59166fabc2029b916bd61d00 vdr-2.1.6.tar.bz2 99f2f7094a242462696c0da5e52bb4c3 vdr-2.1.5-2.1.6.diff WARNING: ======== This is a *developer* version. Even though *I* use it in my productive environment, I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Revoked "Fixed some compiler warnings with Clang 3.4.1" from ci.c, because this did not compile with older versions of gcc (thanks to Sören Moch). - Fixed keeping the current position in the Recordings menu if a recording was deleted in a sub folder. - Fixed handling transfer mode on full featured DVB cards for encrypted channels that have no audio pid (reported by Christian Winkler). - Fixed a possible endless loop in cH264Parser::GetGolombUe(), which caused recordings on some HD channels to get stuck and resulted in buffer overflows. - Fixed handling PAT packets when detecting frames, so that they can be properly taken into account when regenerating the index of a recording. - Fixed adding new source types in case they are already registered (reported by Rolf Ahrenberg). - Removed an unnecessary assignment from cMenuRecordings::~cMenuRecordings(). - The Recordings menu now remembers the last recording the cursor was positioned on, independent of the last replayed recording. When a replay ends, however, the cursor will initially be positioned to the last replayed recording again when the menu is opened. - Updated the Finnish OSD texts (thanks to Antti Hartikainen). - Fixed drawing the live indicator in the LCARS skin in case there are no devices. - When checking for obsolete channels, those with an RID that is not 0 are now ignored (suggested by Oliver Endriss). - The SDT is now only parsed *after* the NIT has been read, and it explicitly uses the source value derived from the NIT. This should prevent new channels from being created with the wrong source. - Added a log message in case a receiver is detached from its device because the assigned CAM can't decrypt the channel. - Refactored setup parameter handling for output devices: + The function cDevice::GetVideoSystem() has been deprecated and will be removed in a future version. In order to check whether a particular plugin needs to be modified if this function is removed, you can comment out the line #define DEPRECATED_VIDEOSYSTEM in device.h. + Handling the "video (display) format" (things like 16:9, 4:3, pan&scan, letterbox etc) shall now be done by the individual output devices, because the types and numbers of parameters are too device specific. The Setup/DVB parameters "Video format" and "Video display format" are still there for now and can be used by SD devices. HD devices, however, shall not use these parameters (any more), but rather implement their own setup menu with the necessary parameters for controlling output. + The dvbhdffdevice plugin has been modified accordingly. + Made it clear that cDevice::SetDigitalAudioDevice() merely tells the output device that the current audio track is Dolby Digital. This function was only used by the original "full featured" DVB cards - do not use it for new developments! If an output device has several ways of replaying audio (like HDMI or analog jack) it shall implement the proper options in its plugin's SetupMenu() function. - Added support for "Pilot", "T2-System-Id" and "SISO/MISO" parameters (thanks to Rolf Ahrenberg). - Now initializing the isOnVideoDirectoryFileSystem member of cRecording when scanning the video directory, so that it won't cause a delay when opening the menu on a system with a large number of recordings. - Now resetting the isOnVideoDirectoryFileSystem member of a cRecording to -1 after renaming it, so that it will be re-checked upon the next call to IsOnVideoDirectoryFileSystem(). - Added support for systemd (thanks to Christopher Reimer). To activate this you need to add "SDNOTIFY=1" to the 'make' call.	2014-03-16 16:20:07 +01:00
Klaus Schmidinger	5076cfb2ed	Version 2.1.1 ... VDR developer version 2.1.1 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.1.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.0.0-2.1.1.diff MD5 checksums: b17f9838bb8ddee9620f838fea7a171d vdr-2.1.1.tar.bz2 8b8ca593885c380cd370e6d19a5b16a1 vdr-2.0.0-2.1.1.diff WARNING: ======== This is a *developer* version. Even though *I* use it in my productive environment, I strongly recommend that you only use it under controlled conditions and for testing and debugging. The main focus of this version is on adding basic support for positioners to control steerable satellite dishes. Manually controlling the dish position and storing individual positions will follow later. The fixes contained in this version will be released in a stable version 2.0.3 later, if there are no problems. From the HISTORY file: - Fixed initializing cDevice::keepTracks. - Fixed an endless loop in cTextWrapper::Set() in case the given Width is smaller than one character (reported by Stefan Braun). - Removed all "modified since version 1.6" markers from PLUGINS.html. - Added definitions for older DVB API versions, back until 5.0 (based on a patch from Udo Richter). - Changed cThread::SetIOPriority() from "best effort class" to "idle class" in order to improve overall performance when an editing process is running (thanks to Jochen Dolze). - Fixed handling '/' and '~' in recording file names in case DirectoryEncoding is used (thanks to Lars Hanisch). - Changed the sign of the satellite position value in cSource to reflect the standard of western values being negative. The new member function cSource::Position() can be used to retrieve the orbital position of a satellite. - Fixed multiple occurrences of the same directory in the recordings list in case there are directories that only differ in non-alphanumeric characters (was broken by "Fixed selecting the last replayed recording in the Recordings menu in case there are folders and plain recordings with names that differ only in non-alphanumeric characters" in version 1.7.36). - Fixed displaying the frame number when setting an editing mark (thanks to Thomas Günther). - Fixed no longer generating any editing marks if the edited recording results in just one single sequence (reported by Halim Sahin). - Fixed an error message when parsing SCR values in diseqc.conf. - Fixed an unexpected RCS version tag in the newplugin script. - Fixed an endless loop in the DrawEllipse() functions for very small ellipses (reported by Stefan Braun). - Fixed a crash in the LCARS skin's main menu in case there is no current channel (reported by Dominique Dumont). - Added basic support for positioners to control steerable satellite dishes (based on a patch from Seppo Ingalsuo and Ales Jurik). + Supports GotoN (aka "DiSEqC 1.2") and GotoX (aka "USALS"). + The new DiSEqC command code 'P' can be used to instruct a positioner to move the dish to the required satellite position. When a 'P' code is processed, further execution of the remaining DiSEqC sequence (if any) is postponed until the positioner has reached the new satellite position. + The new special source value of "S360E" can be used in diseqc.conf to indicate that an entry using a positioner can move the dish to any requested position within its range. Think of it as "full circle". + The devices a particular cDiseqc or cScr applies to are now stored directly in each cDiseqc or cScr, respectively. + A plugin can implement a custom positioner control (see PLUGINS.html, section "Positioners"). + The new function cSkinDisplayChannel::SetPositioner() can be implemented by skins to show the user a progress display when the dish is being moved. The default implementation calls SetMessage() with a string indicating the new position the dish is being moved to. The LCARS skin shows a progress bar indicating the movement of the dish. + The new parameters "Site latitude", "Site longitude", "Positioner speed", and "Positioner swing" in the "Setup/LNB" menu can be used to configure the necessary values for a steerable dish. + The cDvbTuner now has a new status tsPositioning, in which it waits until a steerable dish has reached its target position. Parsing SI data is paused until the target position has been reached. - The LCARS skin now shows the source value of the current channel in its channel display. - Fixed asserting free disk space in the cutter. - No longer trying to delete old recordings in AssertFreeDiskSpace() if the given Priority is less than 1. - Fixed handling LIRC events in case repeated events are lost. - Fixed a possible crash when shutting down VDR while subtitles are being displayed (reported by Ville Skyttä). - cDevice::IsPrimaryDevice() now also checks whether the primary device actually has a decoder and returns false otherwise. This should improve device allocation on systems that are only used as a receiver and don't actually display anything. - Increased the value of MAXRETRIES to 20 to reduce the probability of disturbances in transfer mode. - All bonded devices (except for the master) now turn off their LNB power completely to avoid problems when receiving vertically polarized transponders (suggested by Manfred Völkel and Oliver Endriss). - Reverted the change from version 1.5.7 that made all logging go to LOG_ERR (thanks to Christopher Reimer). - Added Begin/EndSegmentTransfer() to the EPG handler interface (thanks to Jörg Wendel). - The code for distributing recordings over several video directories is now deprecated and disabled by default. You can re-enable this feature by removing the comment sign ('//') from the beginning of the line //#define DEPRECATED_DISTRIBUTED_VIDEODIR // Code enclosed with this macro is ... in the file videodir.c. Note, though, that this can only be a temporary workaround. This feature will be completely removed in one of the next developer versions. Distributing the video directory over several disks was a useful feature in times when disks were still relatively small, but it also caused serious problems in case one of the disks failed. Nowadays hard disks come in sizes measured in terabytes, and tools like "mhddfs" can be used to combine several disks to form one large volume. A recommended method for a relatively safe disk setup in a VDR system is to use two 1TB (or larger) disks and use them as a RAID-1 (mirrored). That way, if one disk fails, you can replace it without data loss.	2013-08-25 18:40:45 +02:00
Klaus Schmidinger	d1b0368a15	Version 1.7.41 ... VDR developer version 1.7.41 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.41.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.40-1.7.41.diff MD5 checksums: c7928bff45fa1c0e6dadf2c0a5adf94b vdr-1.7.41.tar.bz2 d20f62005288f54bb4596e1e091419ac vdr-1.7.40-1.7.41.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment, I strongly recommend that you only use it under controlled conditions and for testing and debugging. Approaching version 2.0.0: ========================== If there are no more serious bug reports, the final version 2.0.0 of VDR shall be released on March 31, 2013. So please test this developer version intensely and report any problems you might encounter as soon as possible. The following language files still have the given number of untranslated texts: da_DK.po: 134 el_GR.po: 197 hr_HR.po: 134 lt_LT.po: 1 nn_NO.po: 262 pt_PT.po: 28 sl_SI.po: 1 sr_SR.po: 80 tr_TR.po: 134 If nobody takes care of these, they will remain untranslated in version 2.0.0. From the HISTORY file: - Updated the Hungarian OSD texts (thanks to István Füley). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - Updated the Polish OSD texts (thanks to Marek Nazarko). - Fixed using PATH_MAX and NAME_MAX (+/-1 because the first one includes the terminating 0, while the latter doesn't). - The 'plugins' target of the VDR Makefile now also copies files matching the wildcard "lib$$i-*.so" (previously only "libvdr-*.so") and also descends into subdirectories of the plugin source. - The parameters PATH and NAME to the --dirnames command line option may now be left empty to use the default values if only ENC shall be set (thanks to Helmut Auer for some improvements to this change). - Fixed a possible "Channel not available" if a recording starts on a system with bonded devices (thanks to Siegfried Bosch). - Fixed stopping an ongoing recording on a system with bonded devices, if a timer with a higher priority requires a different band. - Updated the introductory text of the vdr.1 man page. - Added a note to the INSTALL file regarding multiple disk setup becoming deprecated in a future version of VDR. - When switching to a less privileged user id, VDR now sets the environment variables HOME, USER, LOGNAME and SHELL accordingly (thanks to Manuel Reimer). - Updated the help and man page entry about the location of the epg.data file (thanks to Ville Skyttä). - Fixed creating a new VPS timer with the SVDRP command NEWT (thanks to Johann Friedrichs).	2013-03-16 17:14:23 +01:00
Klaus Schmidinger	b8b6cd3e89	Version 1.7.39 ... VDR developer version 1.7.39 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.39.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.38-1.7.39.diff MD5 checksums: 3f0681f4aa6bd8deffc8208c40d34d2d vdr-1.7.39.tar.bz2 1c13a683694c6c3c52444c1689477876 vdr-1.7.38-1.7.39.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. Approaching version 2.0.0: ========================== If all goes well, there will be just one more developer version after this one, and then it's going to be version 2.0.0. From the HISTORY file: - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Updated the Polish OSD texts (thanks to Marek Nazarko). - Modified handling user inactivity in the shutdown handler to avoid a problem in case the system time is changed after VDR has been started (thanks to Udo Richter, reported by Sören Moch). - Updated the Czech OSD texts (thanks to Ales Jurik). - Changed the template for PLGCFG to $(CONFDIR)/plugins.mk (thanks to Ville Skyttä). - Updated the Swedish OSD texts (thanks to Richard Lithvall). - Now clearing device bondings for devices that don't provide DVB-S in the Setup/LNB menu (reported by Juergen Lock). - Fixed a possible deadlock in handling the tuners of bonded devices (thanks to Juergen Lock). - Improved working around the broken driver values for SNR in case of a "TT-budget S2-3200" receiving DVB-S2. - The demos in the "osddemo" plugin can now also be ended with the "Back" key. - Fixed flashing OSD in "high level OSD" mode of the TT S2-6400 in case a menu is open while subtitles are being displayed. - Fixed stuttering or asynchronous audio after changing the audio track. This is done by doing a "jump" to the current position, which clears all buffers. However, this only works with TS recordings. With PES recordings it causes a segfault - haven't been able to figure out why. - Added a manual page for 'svdrpsend' (thanks to Tobias Grimm). - Fixed immediately disappearing subtitle track menu in "high level OSD" mode of the TT S2-6400 when selecting "No subtitles". - Updated the French OSD texts (thanks to Bernard Jaulin). - Updated the Dutch OSD texts (thanks to Carel Willemse). - Removed all "fuzzy" translations from the files ar.po, hu_HU.po and sr_SR.po, because more often than not they are just wrong. - Now calling DeviceClear() in cTransfer::Receive() if the output device blocks, instead of not retrying for 10 seconds (reported by Andreas Mair, with help from Oliver Endriss). - Updated the Spanish OSD texts (thanks to Luca Olivetti). - Updated the Hungarian language texts (thanks to István Füley). - Changed the calls to Skins.QueueMessage() in vdr.c that are related to reporting the status of the editing process back to Skins.Message() in order to have them appear immediately. - When sorting recordings by name, folders are now always at the top of the list. - Updated the Russian OSD texts (thanks to Oleg Roitburd).	2013-03-10 16:37:38 +01:00
Klaus Schmidinger	4c59501a6b	Version 1.7.38 ... VDR developer version 1.7.38 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.38.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.37-1.7.38.diff MD5 checksums: f4ef0f60ed662f3c983a830da67df9b2 vdr-1.7.38.tar.bz2 e945b0f44e13ed768de726cf6e66317c vdr-1.7.37-1.7.38.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. Approaching version 2.0.0: ========================== If all goes well, there should be no more functional or API changes before the final version 2.0.0. There will just be a few more fixes. From the HISTORY file: - Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Updated the French OSD texts (thanks to Marc Perrudin, Bernard Jaulini and Peter Münster). - Updated the Macedonian OSD texts (thanks to Dimitar Petrovski). - Fixed moving editing marks, so that they don't get overwritten with old values through an update of the marks file. - Removed an invalid line from channels.conf.terr (reported by Lars Hanisch). - Fixed an unexpected k_Repeat key event after a k_Release in lirc.c. - Fixed permissions of po/sr_SR.po (reported by Dominic Evans). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed using "Pause" and "Slow motion" near the end of a recording (replay stopped a few seconds after the end of the recording file has been reached). - Fixed selecting the last replayed recording in the Recordings menu in case there are folders and plain recordings with names that differ only in non-alphanumeric characters (reported by Andre Weidemann). - Fixed the description of the OSD drawing functions DrawEllipse() (the values -5...-8 for the Quadrants parameter are not implemented). - Made cOsd::DestroyPixmap() "NULL proof". - Now deleting any previously allocated pixmaps in cOsd::SetAreas(). - Added demos of the DrawEllipse() and DrawSlope() function to the 'osddemo' plugin (press '1' or '2', respectively). - Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras). - The timeout for trying to switch to a valid programme is now reset immediately once a programme has been found. - No longer checking for EOPNOTSUPP in cDvbTuner::GetSignalQuality() to avoid breaking this function in case the driver suddenly decides to return a different errno value if an operation is not supported. - Moved the definition of TIMERMACRO_TITLE and TIMERMACRO_EPISODE from recording.h to config.h and using them to initialize Setup.NameInstantRecord (avoids having the same information in two places). - Fixed the return value of cOsdProvider::StoreImage() in case there is no OSD provider. - Fixed a crash in cMenuEditChanItem::Set() when entering a channel number that doesn't exist (reported by Mikael Hübsch). - Fixed displaying pending timers in "alert" mode in the LCARS skin. - Added missing $(LDFLAGS) to the Makefile of the dvbhddevice plugin (thanks to Ville Skyttä). - Fixed some spellings in PLUGINS.html and Doxyfile (thanks to Ville Skyttä). - Added '-p' to the cp command in the install-conf target of the Makefile (thanks to Ville Skyttä). - Added missing 'const' to cDevice::HasProgramme() and cDevice::HasLock(). - Fixed determining the priority of the primary device in case it is neither replaying nor receiving a live channel (thanks to Matthias Senzel for reporting a problem with switching back to live viewing after replay in a setup with device bonding). - Removed all \return and \param tags from comment lines marked with "///<" for Doxygen. There was only a rather small number of these, and I would probably always forget to put them in place when writing future comments, so I decided to drop them entirely. - Added Doxyfile.filter to have special characters escaped that would otherwise be dropped by Doxygen (reported by Ville Skyttä). - Using 'cat' instead of 'cp' to copy the Doxyfile to avoid problems in case Doxyfile is write protected. - Updated the Doxyfile with a newer version of Doxygen. - Turned off following symlinks in the Doxyfile. - Removed trailing whitespace. - Expanded tabs in PLUGINS/src/dvbhddevice/setup.c. - Some formatting fixes.	2013-02-17 18:11:16 +01:00
Klaus Schmidinger	14bd32b948	Version 1.7.37 ... VDR developer version 1.7.37 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.37.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.36-1.7.37.diff MD5 checksums: 602dc7e678bcfcf075da36344a337562 vdr-1.7.37.tar.bz2 34e953fcffc112f316cbfc1f53915324 vdr-1.7.36-1.7.37.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. Approaching version 2.0.0: ========================== If all goes well, there should be no more functional or API changes before the final version 2.0.0. There will just be a few more fixes. From the HISTORY file: - Now also using FindHeader() in cMpeg2Fixer::AdjTref() (pointed out by Sören Moch). - Added missing template for DVBDIR to Make.config.template (reported by Derek Kelly). - The LCARS menu now also works if the OSD has only 1bpp (two colors). - Fixed possible garbage in the remaining time of the LCARS replay display in case the hours change from two to one digit. - Fixed upscaling bitmaps. The last row and column of the scaled bitmap was not filled, which resulted in empty lines between scaled subtitles. - Fixed a leftover line in case a two line subtitle was followed by a one line subtitle on the dvbhddevice in "high level" OSD mode. - Returning 0 from cDvbSdFfDevice::NumProvidedSystems() if option --outputonly is given. - The index file is now closed after initially reading it if it is older than 3600 seconds. - Improved responsiveness during replay when close to the recording's end. - Fixed a leftover progress display in the LCARS main menu when replay of a recording ends while the menu is open, and the live channel has no EPG information. - Fixed possible audio chatter when a recording is replayed to its very end. - Added dependency on 'i18n' to 'install-i18n' in the VDR Makefile (thanks to Tobias Grimm). - Changed several calls to Skins.Message() in vdr.c to Skins.QueueMessage() in order to avoid a black screen while such a message is displayed in case the channel will be switched (reported by Uwe Scheffler). - Updated the Slovakian language texts (thanks to Milan Hrala). - Improved LIRC timing for repeat function. - When pausing live video, the current audio and subtitle tracks are now retained. - Added some notes about plugin Makefiles to PLUGINS.html. - Avoiding an extra key press event if the repeat function kicks in when controlling VDR via the PC keyboard. - The new options "Setup/Miscellaneous/Remote control repeat delay" and "Setup/Miscellaneous/Remote control repeat delta" can be used to adjust the behavior of the remote control in case a key is held pressed down for a while, so that the repeat function kicks in (see MANUAL). The builtin LIRC and KBD remote controls already use these parameters. It is recommended that plugins that implement an interface to any kind of remote controls also use the parameters Setup.RcRepeatDelay and Setup.RcRepeatDelta for the desired purpose, and remove any setup options they might have that serve the same purpose. - cTimer no longer does any special "VFAT" handling to shorten directory names to 40 characters. When a string is used as a directory name for a recording, the maximum length of the directory path, as well as the individual directory names, is now limited to the values specified by the new command line option --dirnames (see man vdr(1) for details). For backwards compatibility the option --vfat is still available and has the same effect as --dirnames=250,40,1. - The macro MaxFileName is now obsolete and may be removed in future versions. Use NAME_MAX directly instead. - There is no more fixed limit to the maximum number of cPixmap objects an OSD can create. However, a particular device may still be unable to create an arbitrary number of pixmaps, due to limited resources. So it's always a good idea to use as few pixmaps as possible. - Fixed formatting and removed some superfluous break statements in vdr.c's command line option switch.	2013-02-09 18:56:41 +01:00
Klaus Schmidinger	889f7deeb4	Version 1.7.36 ... VDR developer version 1.7.36 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.36.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.35-1.7.36.diff MD5 checksums: e514f72a2a8c44f39e47b540d6ad325f vdr-1.7.36.tar.bz2 9312a0d10bcda87d3c3c7e6dfbebcd05 vdr-1.7.35-1.7.36.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Added maximum SNR value for PCTV Systems nanoStick T2 290e (thanks to Antti Hartikainen). - Added a remark indicating that the coordinates of Rect in a call to cDevice::CanScaleVideo() are in the range of the width and height returned by GetOsdSize() (suggested by Reinhard Nissl). - Modified the Makefiles (thanks to Christopher Reimer). By default VDR is now built according to the FHS ("File system Hierarchy Standard"), and a plain "make" in the VDR source directory just builds everything, but doesn't copy it to ./PLUGINS/lib and ./locale any more. You can use a Make.config file (copied from Make.config.template) and set the parameter LCLBLD=1 to have everything built and installed under the VDR source tree (as was the default in previous versions). If you already have your own Make.config file, you may want to copy the new Make.config.template and adapt it to your needs. If you don't want VDR's data files to be spread around your system according to the FHS, you can set the parameter ONEDIR=1 (using Make.config) to have all files in one /video directory as before. - Fixed the example for cReceiver in PLUGINS.html. - Fixed sorting recordings in case two folders have the same name, but one of them ends in an additional digit, as in "abc" and "abc2" (reported by Andreas Mair). - Added "repeat" function when using the keyboard to control VDR (thanks to Reinhard Nissl). - The SVDRP command LSTR now knows the additional parameter "path", which can be given to get the actual file name of a recording's directory (suggested by Stefan Stolz). - Fixed multiple occurrences of the same directory in the recordings list in case there are directories that only differ in non-alphanumeric characters (reported by Andreas Mair). - Absolute jumps when replaying a recording (via the Red key) are now only performed if an actual value has been entered (suggested by Ulf Kiener). - The last replayed recording is now stored in setup.conf, which allows the blue "Resume" key in the main menu to work even after a restart of VDR. - The SVDRP command NEWT no longer checks whether a timer with the given data already exists (suggested by Malte Forkel). - Implemented scaling of SPU bitmaps (thanks to Johann Friedrichs). - Improved cutting MPEG-2 video (thanks to Sören Moch). - Reduced the number of retries in cTransfer::Receive() to avoid blocking recordings in case the primary device can't handle the current live signal.	2013-01-22 00:35:10 +01:00
Klaus Schmidinger	873ab00a77	Version 1.7.35 ... VDR developer version 1.7.35 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.35.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.34-1.7.35.diff MD5 checksums: 3b9d0376325370afb464b6c5843591c7 vdr-1.7.35.tar.bz2 4b6fb681359325ad33a466503503e772 vdr-1.7.34-1.7.35.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Changed the type of the TimerMatch parameter in cSkinDisplayMenu::SetItemEvent() from 'int' to 'eTimerEvent' (reported by Christoph Haubrich). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cOsd::GetBitmap() to always return NULL if a non-exising area is requested. - Added several missing "`ls $^`" in the calls to xgettext in plugin Makefiles and the "newplugin" script. - Fixed setting the --package-name and --package-version options in the calls to xgettext in several plugin Makefiles. - Added "-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE" to the DEFINES in the Makefile (somehow got lost from Make.config.template in version 1.7.13). - Removed some redundancy in the Makefile/Make.global/Make.config mechanism (suggested by Christopher Reimer). The file Make.global is no longer used, and plugin Makefiles don't include the file Make.config any more. Instead they now retrieve all necessary information through calls to pkg-config. - The plugin Makefiles now have a separate 'install' target (suggested by Christopher Reimer). In order to still allow the normal building of VDR (with all plugins in its ./PLUGINS/src subdirectory, the plugin libraries in ./PLUGINS/lib and the i18n files in ./locale) the VDR Makefile checks the settings of LIBDIR and LOCDIR when building the plugins from within the VDR source directory. If these macros have their default values, then the 'install' targets of the plugins' Makefiles are called. Otherwise the 'all' targets are called and the plugins are merely built, and will have to be installed by a call to 'make install-plugins'. This now also allows a user to copy a plugin source to any directory, change into that directory and do 'make' and 'make install' to have the plugin installed to wherever the local installation of VDR expects them. - Plugin Makefiles now use DESTDIR and the 'install' program (thanks to Christopher Reimer). - Due to the changes to the plugin Makefiles, existing plugins will not build with this version of VDR any more. You can either use the new 'newplugin' script to generate a dummy plugin directory and use the Makefile from there (adapting it to your particular plugin), or apply the patch from ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33-pluginmakefile.diff to your Makefile to make the necessary changes (see comments in that file for details). - Added the new menu categories mcChannelEdit, mcTimerEdit, mcScheduleNow, mcScheduleNext, mcRecordingInfo, mcPluginSetup, mcSetupOsd, mcSetupEpg, mcSetupDvb, mcSetupLnb, mcSetupCam, mcSetupRecord, mcSetupReplay, mcSetupMisc and mcSetupPlugins. - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed replay stuttering close to the end of an ongoing recording (reported by Andreas Regel). - Fixed cIndexFile::GetNextIFrame() to properly handle the case where the very last frame is an I-frame (which normally shouldn't occur). - Fixed replaying ongoing recordings from other VDR instances.	2012-12-31 16:01:02 +01:00
Klaus Schmidinger	15485a5e06	Version 1.7.34 ... VDR developer version 1.7.34 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.34.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33-1.7.34.diff and a helper patch for plugin Makefiles can be found at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33-pluginmakefile.diff MD5 checksums: 55d9aba62563efe39ee040e987f7023c vdr-1.7.34.tar.bz2 019ba806b263f7054dbd0da8956ea73b vdr-1.7.33-1.7.34.diff 6c2b8efe5eead6822f006bc867ccb324 vdr-1.7.33-pluginmakefile.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. IMPORTANT: ========== This version comes with revised versions of the Makefiles for VDR itself and all of its standard plugins. As a result of this, existing plugins will no longer build with this version of VDR, unless their Makefiles are properly adapted. To do so, please follow the instructions given below. There is also a generic patch (see below) that might help you update your plugin's Makefile. If you do want to build this version of VDR with plugins that don't have their Makefiles adapted yet, you can simply copy the Makefile, Make.global and Make.config (if applicable) files from a previous version of VDR into this source and use them. Note, though, that you cannot mix old and new Makefiles. All Makefiles for VDR and all plugins must be either old or new! PLEASE GIVE THE PLUGIN DEVELOPERS SOME TIME TO ADAPT THEIR MAKEFILES ACCORDINGLY. AFTER ALL, IT'S CHRISTMAS, SO THEY PROBABLY HAVE BETTER THINGS TO DO THAN SIT AT THEIR COMPUTERS ;-). From the HISTORY file: - Changed the type of the TimerMatch parameter in cSkinDisplayMenu::SetItemEvent() from 'int' to 'eTimerEvent' (reported by Christoph Haubrich). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cOsd::GetBitmap() to always return NULL if a non-exising area is requested. - Added several missing "`ls $^`" in the calls to xgettext in plugin Makefiles and the "newplugin" script. - Fixed setting the --package-name and --package-version options in the calls to xgettext in several plugin Makefiles. - Added "-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE" to the DEFINES in the Makefile (somehow got lost from Make.config.template in version 1.7.13). - Removed some redundancy in the Makefile/Make.global/Make.config mechanism (suggested by Christopher Reimer). The file Make.global is no longer used, and plugin Makefiles don't include the file Make.config any more. Instead they now retrieve all necessary information through calls to pkg-config. - The plugin Makefiles now have a separate 'install' target (suggested by Christopher Reimer). In order to still allow the normal building of VDR (with all plugins in its ./PLUGINS/src subdirectory, the plugin libraries in ./PLUGINS/lib and the i18n files in ./locale) the VDR Makefile checks the settings of LIBDIR and LOCDIR when building the plugins from within the VDR source directory. If these macros have their default values, then the 'install' targets of the plugins' Makefiles are called. Otherwise the 'all' targets are called and the plugins are merely built, and will have to be installed by a call to 'make install-plugins'. This now also allows a user to copy a plugin source to any directory, change into that directory and do 'make' and 'make install' to have the plugin installed to wherever the local installation of VDR expects them. - Plugin Makefiles now use DESTDIR and the 'install' program (thanks to Christopher Reimer). - Due to the changes to the plugin Makefiles, existing plugins will not build with this version of VDR any more. You can either use the new 'newplugin' script to generate a dummy plugin directory and use the Makefile from there (adapting it to your particular plugin), or apply the patch from ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33-pluginmakefile.diff to your Makefile to make the necessary changes (see comments in that file for details). - Added the new menu categories mcChannelEdit, mcTimerEdit, mcScheduleNow, mcScheduleNext, mcRecordingInfo, mcPluginSetup, mcSetupOsd, mcSetupEpg, mcSetupDvb, mcSetupLnb, mcSetupCam, mcSetupRecord, mcSetupReplay, mcSetupMisc and mcSetupPlugins. - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed replay stuttering close to the end of an ongoing recording (reported by Andreas Regel). - Fixed cIndexFile::GetNextIFrame() to properly handle the case where the very last frame is an I-frame (which normally shouldn't occur). - Fixed replaying ongoing recordings from other VDR instances.	2012-12-26 17:42:33 +01:00
Klaus Schmidinger	beffcabc81	Version 1.7.32 ... VDR developer version 1.7.32 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.32.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.31-1.7.32.diff MD5 checksums: 068ba78fd427694dcc480fe3b2d07148 vdr-1.7.32.tar.bz2 222f1e9b4d4edaa6fe57286409614cc7 vdr-1.7.31-1.7.32.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. The main focus of this version is on an improved frame detection code, and improvements to the cutting process. When cutting a recording, VDR now removes any "dangling" TS packets from the beginning of an editing sequence and pulls in any "pending" TS packets at the end of a sequence. It also fixes all timestamps and continuity counters. However, while the results look much better now in, for instance, Kaffeine, the TT S2-6400 still shows some video artifacts at the editing points, and the Mac video player sometimes totally chokes on edited material. I did spend a lot of time trying to find out what could still be wrong here, but couldn't come up with any new ideas. So I think it's now time to invite others to test this new cutting code, read the source code and try to find out what's still going wrong here. Maybe (hopefully ;-) it's just some stupid little error... ;-) From the HISTORY file: - Pressing the Play key during normal live viewing mode now opens the Recordings menu if there is no "last viewed" recording (thanks to Alexander Wenzel). The same behavior has been implemented for the Blue key in the main menu. - cIoThrottle::Engaged() is now also checked in cRemoveDeletedRecordingsThread::Action(), to suspend removing deleted recordings in case this is necessary to make room for new, ongoing recordings (suggested by Udo Richter). - The cThread constructor now has an additional boolean parameter that can be set to true to have this thread run at a lower priority. Plugin authors that use low priority threads may want to use this instead of the calls to SetPriority(19) and SetIOPriority(7). The priority of a thread ("low" or "high") is now logged when the thread starts. - Changed DTV_DVBT2_PLP_ID to DTV_STREAM_ID in dvbdevice.c to adapt to an incompatible change in DVB API 5.8 (reported by Derek Kelly). Removed the meanwhile obsolete definition of FE_CAN_TURBO_FEC. - Fixed some compiler warnings under gcc version 4.7.1. - Fixed setting the video format in the dvbhdffdevice (thanks to Torsten Lang). - Fixed 'make install' to not overwrite existing configuration files (thanks to Peter Münster). - Added including the Make.global and Make.config files to the dvbdhffdevice's libhdffcmd/Makefile. - Added options to build a 32-bit version of VDR on a 64-bit machine to Make.config.template. - Fixed handling VPS timers in case the running status of an event goes to '1' (not running) and later goes to '4' (running). - If a frame position in the 'marks' file of a recording doesn't point to an I-frame, it will now be shifted towards the next I-frame, either up or down, whichever is closer (suggested by Udo Richter). - Fixed a possible memory leak in SI::StructureLoop::getNextAsPointer() (reported by Sundararaj Reel). - Fixed handling timers in case an event is modified and "phased out" while the timer is recording. - Improved frame detection by parsing just far enough into the MPEG-4 NAL units to get the necessary information about frames and slices. - The initial syncing of the frame detector is now done immediately after the first complete GOP has been seen. This makes recordings and especially pausing live video start up to twice as fast as before. - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Fixed handling the very last entry in a recording index. - The return type of cMarks::Add() has been changed to void, since due to the sorting of the list of marks the returned pointer might have pointed to a totally different mark. Besides, the return value was never actually used. - Improved editing TS recordings by + stripping dangling TS packets from the beginning of a sequence + including pending TS packets at the end of a sequence + fixing all timestamps and continuity counters + generating editing marks for the edited version in such a way that each cutting point is marked by an "end" and "begin" mark with the same offset + no longer generating an editing mark at the "end" of the edited recording (this was actually generated at the beginning of the last GOP, so that a subsequent edit would have cut off the last GOP) + no longer generating any editing marks if the edited recording results on just one single sequence + ignoring pairs of editing marks that are placed at exactly the same position of a recording when actually cutting the recording + not doing anything if the editing marks in place would result in the edited version being the same as the original recording - Editing marks can now be placed directly on top of each other, in which case they simply mark a position, but have no effect on the actual cutting process. - When positioned at an offset where two (or more) editing marks are placed on top of each other, the '4' key moves the first one of them to the left, while the '6' key moves the last one of them to the right. The '7' and '9' key handle multiple marks at the same place as if it were one single mark. - Modified editing marks are now written to disk whenever the replay progress display gets hidden (thanks to Christoph Haubrich).	2012-11-19 00:55:28 +01:00
Klaus Schmidinger	d34026c18b	Version 1.7.30 ... VDR developer version 1.7.30 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.30.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.29-1.7.30.diff MD5 checksums: c6d75f2962bc3e22d9313c0ee4fa113a vdr-1.7.30.tar.bz2 a63098efcc58bc697d6b890097d9c370 vdr-1.7.29-1.7.30.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. The default skin "LCARS" displays the signal strengths and qualities of all devices in its main menu. For devices that have an stb0899 frontend chip (like the TT-budget S2-3200) retrieving this information from the driver is rather slow, which results in a sluggish response to user input in the main menu. To speed this up you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source. From the HISTORY file: - Fixed sorting recordings in the top level video directory. - Fixed handling control characters in SI data in case of UTF-8 encoded strings (thanks to Mehdi Karamnejad for reporting a problem with garbled UTF-8 EPG data and helping to debug it). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - When checking whether a video directory is empty, file names that start with a dot ('.') are now ignored and will be implicitly removed if the directory contains no other files. This fixes the leftover ".sort" files that were introduced in version 1.7.29. - Added IsUpdate() to the EPG handler interface (thanks to Jörg Wendel). - Fixed detecting transfer mode on full featured DVB cards (thanks to Stefan Huelswitt for reporting a problem with updating CA descriptors in such cases). - Fixed a race condition when zapping in transfer mode (reported by Reinhard Nissl). This involves a slight change in the semantics of the cReceiver::Activate() function, which is now called with 'false' after the receiver has been detached from the device. - The new function cDevice::ReadFilter() can be used by devices to implement their own way of retrieving section filter data (thanks to Deti Fliegl). - The new function cDevice::HasInternalCam() can be implemented by devices that provide encrypted channels in an already decrypted form, without requiring explicit handling of a CAM (thanks to Tobias Grimm). - VDR can now be built according to the FHS ("File system Hierarchy Standard") by activating the line #USEFHS = 1 in a copy of the file Make.config.template (thanks to Dennis Bendlin, as well as Christopher Reimer and Udo Richter for contributing to the patch). - By default (without FHS support) the config directory is now set to the value given in the -v option if only -v and no -c is given. - Fixed a long delay at the end when replaying a recording that has stopped recording less than an hour ago (typically time shift mode or a freshly edited recording). - Fixed getting the file size and number of frames of ongoing recordings (only the timestamp of the recording's directory was checked, while it should have been that of the index file). - Fixed sluggish response when manipulating editing marks while a cutting thread is running (reported by Torsten Lang). - The new setup options "OSD/Color key [0123]" can be used to adjust the sequence of the color buttons displayed in the menus to that of the color keys on your remote control (based on a patch from Oliver Schinagl). Authors of plugins that implement skins may want to adapt their SetButtons() function in order to make use of this new feature. See, for instance, the function cSkinClassicDisplayMenu::SetButtons() in skinclassic.c for details.	2012-09-11 23:49:53 +02:00
Klaus Schmidinger	5500959f4f	Version 1.7.28 ... Original announce message: VDR developer version 1.7.28 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.28.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27-1.7.28.diff MD5 checksums: 3ccff2dcc42d112e23dd64f2c39f02f1 vdr-1.7.28.tar.bz2 7249ead4aca4b24e53d49d11c67e1613 vdr-1.7.27-1.7.28.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. The new default skin "LCARS" displays the signal strengths and qualities of all devices in its main menu. For devices that have an stb0899 frontend chip (like the TT-budget S2-3200) retrieving this information from the driver is rather slow, which results in a sluggish response to user input in the main menu. To speed this up you may want to apply the patches from From the HISTORY file: - Fixed cPixmapMemory::DrawEllipse() for quadrants -1 and -4. - Fixed getting the maximum short channel name length in case there are no short names at all (reported by Derek Kelly). - The new function cDevice::DeviceType() returns a string identifying the type of the given device. - Now limiting the number of characters of a channel's (short) name to 16 in the schedules menus, to keep that column from getting overly wide in case there is a channel with a very long name that has no short name. - Fixed EPG scan on systems with only a single DVB device that use software output (reported by Juergen Lock). - Skins can now inquire the menu category for which their cSkinDisplayMenu is currently being used. This can be done either through a call to cSkinDisplayMenu::MenuCategory() or by reimplementing cSkinDisplayMenu::SetMenuCategory(). This information allows a skin to use special icons or decorations for the various types of menus in VDR. - The new setup option "DVB/Standard compliance" can be used to switch between different variations of the DVB standard (thanks to Rolf Ahrenberg). Currently there is "DVB" (for the original DVB standard) and "ANSI/SCTE", which is used to properly handle certain private stream types. - The disk usage is no longer automatically added to the title of the main and "Recordings" menus. This has always been a mekeshift solution and it is now up to the individual skin if, where and how it wants to display this information. A skin can use the new cVideoDiskUsage class to implement such a display. For compatibility, the default skins "Classic VDR", "ST:TNG Panels" and "Text mode" (i.e. curses) have been changed to behave like before. Other skins may want to display the disk usage in totally different ways. - A cOsdMenu can now handle skins that display different numbers of items in the various menu categories. - OSD and skin are now reinitialized after a plugin setup page has been confirmed, to have them react immediately in case any change to a plugin's setup parameter has an effect on the OSD. - The Timers list is now marked as modified whenever a recording starts or ends. - Fixed cDevice::StillPicture(), making sure it doesn't call the derived class's function if no buffer has been allocated (reported by Marcus Roscher). - Fixed the SVDRP command UPDR, which didn't update the global recordings list (reported by Lars Hanisch). - cControl::Control() now has an additional boolean parameter, which can be set to true to get the current player control even if it is hidden. - The new functions cControl::GetRecording() and cControl::GetHeader() can be used to retrieve information about what the current player is playing. - Fixed a possible high CPU load when pausing replay (thanks to Reinhard Nissl). - Fixed character comparisons in cSubtitleObject::DecodeCharacterString() (reported by Reinhard Mantey). - Renamed the function cString::sprintf(const char *fmt, va_list &ap) to vsprintf(), because it might inadvertently be called with a 'char *' as the second argument on some compilers and cause a crash (reported by Sundararaj Reel). - Removed the "bondedMasterFailed" mechanism from cDvbTuner, because it caused problems with the EPG scan in case a transponder is not receivable in a setup with bonded devices (reported by Michael Schneider). - Making sure setup strings don't contain any newline characters (thanks to Joachim Wilke). - The new member function cSkinDisplayReplay::SetRecording() allows a skin to display more information about the currently played recording. - Fixed a mismatched 'delete' in cSchedules::SetEpgDataFileName() (thanks to Reinhard Mantey). - The DrawText() functions of the OSD now accept the new alignment flag taBorder, which triggers keeping a proper distance from the edge that taLeft or taRight aligns to. - Fixed checking for UTF-8 support in cFont::Bidi() (reported by Torsten Lang). - If a recording has no info file, the 'title' of the recording's info is now set to the recording's name. - cVector::Clear() now reinitializes any previously used members. - Fixed resetting CAMs (thanks to Marco Skambraks). - The new function RgbShade() (include osd.h) can be used to generate a brighter or darker version of a given color. - The new class cSortedTimers can be used to quickly get a list of all timers, sorted by their start time. - The new skin "LCARS" is an enhanced version of the "ST:TNG" skin (which is still there in its original layout, for those who don't like the LCARS skin, or can't use it due to OSD limitations). The LCARS skin utilizes the new "menu category" feature to display additional information on the main menu page. It shows upcoming timers and the system's devices, as well as which device is recording which timers. The upper pane of the main menu displays the programme data in live and replay mode, and a progress bar. An indicator on the right side of the device list shows which device is currently used for live viewing, and whether it is in transfer mode. The individual device displays show the device number, the device type, which CAM (if any ) is currently assigned to the device, and the signal strength and quality. On the left side of the OSD there is a permanent display of the current date and time, the disk usage and the system load. "LCARS" is the new default skin of VDR. It requires at least a 4bpp (16 color) full screen OSD, but you can still operate it if your OSD can handle only fewer colors (in which case you may want to switch to the "ST:TNG" or "Classic VDR" skin). - Finally removed the code marked with __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS and LEGACY_CRECEIVER. - Now making sure that the "small font" is never larger than the "osd font". - Fixed font handling with fontconfig 2.9.0 or newer (thanks to Joerg Bornkessel). - Extended the interface to the script that gets called for recordings, so that in the "edited" case it also provides the name of the original recording (thanks to Christian Richter). - Added DeleteEvent() to the EPG handler interface, so that an EPG handler can trigger deleting of an event (thanks to Christian Kaiser). - Speeded up opening menus on systems with many (several thousands) of recordings, by caching the information whether a recording is stored on the video directory file system within the cRecording data (based on a patch from Torsten Lang).	2012-06-05 00:33:28 +02:00
Klaus Schmidinger	19b952728e	Version 1.7.27 ... Original announce message: VDR developer version 1.7.27 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26-1.7.27.diff MD5 checksums: bfeaa79a9e55144bca2b69139c45f1bb vdr-1.7.27.tar.bz2 b23344be51d3e2c2d96cc2dd4e8e564e vdr-1.7.26-1.7.27.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Changed the Green button in the "Edit timer" menu from "Once" to "Single" (suggested by Rolf Ahrenberg). - Fixed some typos in HISTORY and CONTRIBUTORS (thanks to Ville Skyttä). - The channel name column in the "What's on now/next" menu now adjusts its width to display the full short name of each channel (suggested by Dominic Evans). - Dropped the meanwhile obsolete script 'i18n-to-gettext'. - Removed the obsolete function cPlugin::RegisterI18n(). - Removed the obsolete typedef tI18nPhrase. - Adapted menu column widths of 'skincurses' to the wider HD OSD sizes. - Deactivated definition of __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS (recording.h) and LEGACY_CRECEIVER (receiver.h) to trigger an error for any plugin that still uses the respective code. You can reactivate these to quickly make your plugin compile again, but beware that these code parts will be removed in one of the next versions. - Made the "overloaded-virtual" warning an error to detect hidden overloaded virtual functions (thanks to Anssi Hannula for pointing out -Werror=...). Plugin authors may want to change -Woverloaded-virtual to -Werror=overloaded-virtual in their Makefiles. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Improved fast forwarding to the end of a timeshift recording. - The new function cDevice::DeviceName() returns a string identifying the name of the given device. - When toggling a timer between "Single" and "Repeating", the previous setting is now retained in case the user toggles back to the original value. - When estimating the remaining disk space (in hours), the average data rate of all existing recordings is now taken into account. If this value can't be determined, the previous value of 25.75 MB/min is taken. - No longer using GetFont() (which is not thread safe) in the 'osddemo' plugin. - No longer using GetFont() (which is not thread safe) in cSubtitleRegion::UpdateTextData(). - Fixed a memory leak in cSubtitleRegion::UpdateTextData(). - Moved setting LC_NUMERIC further up to make sure any floating point numbers use a decimal point (suggested by Tobias Grimm). - Added missing channel locking to cEIT. - Fixed reduced bpp support for DVB subtitles (thanks to Rolf Ahrenberg). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Reverted some improvements to Make.config.template (thanks to Christian Ruppert). - Fixed handling IDLEPRIORITY in cDvbDevice::ProvidesChannel() (thanks to Frank Schmirler).	2012-03-25 15:43:37 +02:00
Klaus Schmidinger	3df1b6d139	Version 1.7.25 ... Original announce message: VDR developer version 1.7.25 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24-1.7.25.diff MD5 checksums: a3fd482a3dd8027706d4f32a88c6bd13 vdr-1.7.25.tar.bz2 f34adcdc0cdab378431d8946872d6b59 vdr-1.7.24-1.7.25.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - The fps value for channels where it differs from the default is now set correctly when pausing live video. - Increased the average character estimate for calculating tab positions in skins, to better suit wide fonts (reported by Rudi Hofer). - Fixed getting the subsystem ids of DVB devices in case they have been rearranged via udev rules. - Added several cTimer::Set...() functions (suggested by Alexander Rieger). - Changed the return value of cTimer::SetFile() to 'void'. - Revoked "Fixed a possible deadlock in time shift mode" because it caused trouble with output on vdr-xine and dxr3, and also short glitches when replaying on any output device. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed handling subtitle color palettes on channels where subtitles appear "word by word" (thanks to Rolf Ahrenberg). - Fixed upscaling cBitmaps with anti-aliasing (thanks to Rolf Ahrenberg for reporting a problem with color palettes in subtitles). - Fixed getting the video aspect ratio for scaling subtitles. - Removed the "PrimaryLimit". Old "full featured" DVB cards can be run with the --outputonly option to avoid problems with recording high bandwidth channels. Besides, with HDTV becoming ever more popular those cards are pretty much obsolete by now (the TT S2-6400 has no problems recording and replaying high bandwidth channels simultaneously). And, last but not least, people using software players won't notice this change, anyway. - Since cReceivers can have priorities between -99 and 99, the priority for an unused device has been changed from -1 to -100. - If the first event in a schedule has a table id of 0x00, any incoming EIT data for that schedule from the DVB stream will be completely ignored. This way an external EPG source can fill the schedules with EPG data that will not be messed up with that from the DVB data stream. Note, though, that this means VDR can not do VPS controlled recordings with such events! - Added some typecasts to silence gcc compiler warnings (thanks to Rolf Ahrenberg). - Fixed handling overlapping timers in case a VPS timer with higher priority needs to interrupt a timer with lower priority. - The code for the RCU remote control unit has been moved into a separate plugin named "rcu". The REMOTE=RCU option in the 'make' call for VDR is now obsolete. The command line option --rcu is now obsolete. Use -Prcu instead. If you have used --rcu with a device path, use -P"rcu -d<device>". - Added support for automatically selecting subtitles when playing old PES recordings made with the subtitles plugin (thanks to Anssi Hannula). - Revised priority handling to allow receivers with a priority that is lower than that of live viewing (with suggestions from Frank Schmirler): + An idle device (one that is not used for live viewing and has no receiver attached to it) now has priority IDLEPRIORITY (-100). + An unused CAM slot now has priority IDLEPRIORITY. + The default priority of a cReceiver is now MINPRIORITY (-99). + A device that is used only for live viewing (no matter whether it's in Transfer Mode or real live mode) now has priority TRANSFERPRIORITY (-1). + The function cDevice::Receiving() now returns true if there is any receiver attached to the device. Its boolean parameter has no meaning any more. + The default value for the Priority parameter of the function cDevice::ProvidesChannel() has been changed to IDLEPRIORITY. - Added a Query parameter to cDevice::GetDevice(), so that devices can be queried without side effects when zapping. - Replaced min(max()) calls with the new function constrain(). - Fixed handling OSD color button texts in case a menu item has texts of its own (reported by Rolf Ahrenberg). If a plugin creates derived cMenuEditItems that set color button texts, these should not set the texts directly by calling cSkinDisplay::Current()->SetButtons(), but rather call the new member function cMenuEditItem::SetHelp(). - Moved the call to cStatus::MsgChannelSwitch(this, 0) to the beginning of cDevice::SetChannel(), so that any receivers that have been attached to the device by plugins may be detached before the final call to GetDevice(). This actually reverts "Only calling cStatus::MsgChannelSwitch() if a channel is actually going to be switched or has actually been switched successfully" which was made in version 1.1.10, so please report if this has any unwanted side effects.	2012-03-10 23:52:09 +01:00
Klaus Schmidinger	c2d9577b3d	Version 1.7.24 ... Original announce message: VDR developer version 1.7.24 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23-1.7.24.diff MD5 checksums: a034c5e399417dfc583483f650d003ee vdr-1.7.24.tar.bz2 aa1a2b202da92e65945ff39470b26618 vdr-1.7.23-1.7.24.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed a high load in case a transponder can't be received. - Improved the way DVB_API_VERSION is checked. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed asserting there is a live programme if the primary device is bonded with a device that starts a recording on a different band. - Fixed the return type of cMyDeviceHook::DeviceProvidesTransponder() in PLUGINS.html. - Fixed a crash in a plugin using cDeviceHook when VDR ends (reported by Oliver Endriss). - Some improvements to the Makefiles (thanks to Christian Ruppert). - Fixed cRecording::LengthInSeconds(), which wrongfully rounded the result to full minutes (thanks to Christoph Haubrich). - Symbolic links are no longer resolved in cRecordings::ScanVideoDir() (thanks to Sundararaj Reel). - The epg.data file is now read in a separate thread to make the startup process faster in case the file is very large (suggested by Helmut Auer). - Fixed selecting the primary device for receiving the live viewing channel in case it is bonded with an other device and has no receiver attached to it. - Fixed a possible crash when canceling VDR while displaying subtitles, and the primary device is no longer available. - Improved handling subtitles of BBC channels. - No longer using tabs as delimiter in the EPG bugfix log (they were garbled in the log file). - Added a missing '.' after the month in VPS strings. - Added some missing 'const' to cDevice (thanks to Joachim Wilke). - Fixed handling the PrimaryLimit when requesting a device for live viewing (reported by Uwe Scheffler). - Removed superfluous calls to SetVideoFormat() from device constructors. This function is called in cDevice::SetPrimaryDevice(), anyway. - An ongoing editing process is now canceled if either the original or the edited version of the recording is deleted from the Recordings menu. - The SVDRP command DELR now won't delete a recording that is currently being edited. - Removed code stub for obsolete SVDRP command MOVT. - The DVB device adapters/frontends are now probed by scanning the /dev/dvb directory instead of looping through adapter/frontend numbers. This allows for "holes" in the device numbering. - cReadDir::Next() now skips directory entries "." and "..". - Fixed a possible deadlock in time shift mode. - Fixed switching into time shift mode when pausing live video (thanks to Reinhard Nissl for helping to debug this one).	2012-02-19 16:36:45 +01:00
Klaus Schmidinger	59f0138a7d	Version 1.7.23 ... Original announce message: VDR developer version 1.7.23 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff MD5 checksums: de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that one). - Fixed bonding more than two devices. - Fixed handling symbolic links in cRecordings::ScanVideoDir() (reported by Sundararaj Reel). - Fixed a memory leak in cRecordings::ScanVideoDir() in case there are too many link levels (reported by Sundararaj Reel). - Removed redundant memset() in the ctor of cSatCableNumbers (triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong). - Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks to Ville Skyttä). - Added HasSnr to the DEBUG_SIGNALQUALITY output in cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added support for HbbTV to libsi (thanks to Christoph Haubrich). - Added support for devices with more than one delivery system per frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend. - Updated the Hungarian language texts (thanks to István Füley). - cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR commands at any given time (reported by Frank Neumann). - cEvent::FixEpgBugs() now replaces any newline characters in stream component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012). - Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf Ahrenberg). - Fixed cListBase::Move() in case From and To are equal (reported by Sundararaj Reel). - Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg). - Added support for handling DVB-T2 transponders. This requires a DVB driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg). - Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville Skyttä). - Fixed a possible memory corruption in cTsToPes::GetPes() in case of broken TS packets, e.g. when switching channels. - Fixed the SVDRP command CLRE for a single channel in case there are events that have a timer (thanks to Timo Eskola). - BIDI support now checks at runtime whether the system runs with UTF-8 (suggested by Torsten Lang). - Added member functions Adapter() and Frontend() to cDvbDevice (suggested by Rolf Ahrenberg). - The parameters that are only used by "second generation" delivery systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T). - Changed IndexToHMSF() so that it can handle negative Index values. - Added option -N to the msgmerge call in the Makefile, because fuzzy translation mostly resulted in useless strings. - The new setup option "Replay/Show remaining time" can be used to switch between showing the total length or the remaining time of the recording that is currently replayed. - Fixed wrongfully displaying the length of a recording in the title of the replay progress display. - Fixed frozen live view with device bonding in case the bonded master is used for live viewing (reported by Uwe Scheffler).	2012-01-15 16:38:48 +01:00
Klaus Schmidinger	5a28d99936	Version 1.7.22 ... Original announce message: VDR developer version 1.7.22 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff MD5 checksums: b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2 868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't return actual values (thanks to Luca Olivetti). - The DiSEqC codes are now copied in the call to cDiseqc::Execute(). - VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on the "unicable" patch from Lars Hanisch). Since "Unicable" is a registered trademark and stands for only one of many implementations of SCR, the following changes have been made compared to the patch, which need to be taken into account by people who have set up their system using the patch: - The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr"). - The configuration file name has been changed from "unicable.conf" to "scr.conf". - Updated sources.conf (thanks to Arthur Konovalov). - The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans). - Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks to Rolf Ahrenberg). - Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans). - Fixed setting the start time of an edited recording (thanks to Christoph Haubrich). - Temporarily switching free devices to transponders in order to have their running status updated is now done by marking the devices as "occupied" for a certain amount of time. - The new setup options "LNB/Device n connected to sat cable" can be used to define which DVB-S devices are connected to the same sat cable and are therefore "bonded". This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly set up their sat devices with the above options. - Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä). - Fixed several spelling errors (thanks to Ville Skyttä). - The new SVDRP command UPDR can be used to trigger an update of the list of recordings (thanks to Lars Hanisch). - Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä). - Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä). - Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks to Ville Skyttä). - Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg). - Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg). - Fixed a crash with malformed SI data (patch from vdr-portal).	2011-12-05 20:36:02 +01:00
Klaus Schmidinger	bd61fee1e9	Version 1.7.19 ... Original announce message: VDR developer version 1.7.19 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff MD5 checksums: 1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2 db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version introduces functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. Since apparently the various frontend drivers return different maximum values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some deliver a value in the range 0x0000...0xFFFF, while others return values as "dB/10" or "dBm/10" (the latter with an offset to make the value positive, since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength() and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to map these values into the range 0...100, which is the normalized return value of these functions. Take a look at these two functions and maybe remove the comment characters from the lines //#define DEBUG_SIGNALSTRENGTH //#define DEBUG_SIGNALQUALITY in dvbdevice.c to get some debug output if your device doesn't return any directly useful values and may have to be added appropriately to the 'switch (subsystemId)' statement. The channel display of the 'sttng' skin uses these values to implement a signal strength/quality display. From the HISTORY file: - Fixed cString's operator=(const char *String) in case the given string is the same as the existing one (thanks to Dirk Leber). - Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm). - TsGetPayload() now checks if there actually is a payload in the given TS packet (reported by Dirk Leber). - Now sorting the source file names in the call to xgettext, to make sure the results are not dependent on the sequence of the files. Plugin authors may want to change the line containing the xgettext call in their Makefile accordingly by changing "$^" to "`ls $^`". - The primary device is now only avoided for recording if it is an old SD full featured card. This is done through the new function cDevice::AvoidRecording(). - Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl). - Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich). The return value of cDiseqcs::Get() is now const, so plugin authors may need to adjust their code if they use this function. - The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be used to determine the signal strength and quality of a given device (thanks to Rolf Ahrenberg for some input on how to use BER and UNC values to generate a "quality" value). - The 'sttng' skin now displays two colored bars at the bottom of the channel display, indicating the strength (upper bar) and quality (lower bar) of the received signal. The number to the left of these bars indicates the actual device the current channel is being received with. - Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries (reported by Johan Andersson). In order to fix this, the semantics of cFrameDetector had to be changed a little. See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new cFrameDetector::NewPayload() function. - The frame detector now only starts collecting PTS values after it has seen the first I-frame, otherwise it might get MaxPtsValues values and stop analyzing even though the incoming data is still garbage (reported by Derek Kelly). - The info file of a recording is now only overwritten with a new fps value if that new value is not the default value (thanks to Derek Kelly for reporting a problem with the fps value being overwritten in case a recording was interrupted and resumed, and the fps value could not be determined after resuming recording). - The initial channel is now stored by the channel ID in the setup.conf file, in order to avoid problems in case channels are reordered or deleted (reported by Lars Bläser). - Added support for "content identifier descriptor" and "default authority descriptor" to 'libsi' (thanks to Dave Pickles).	2011-06-19 18:35:46 +02:00
Klaus Schmidinger	8b9350c091	Version 1.7.18 ... - Changed -O2 to -O3 in Make.config.template (reported by Matti Lehtimäki). - Added a missing 'default' case in cPixmapMemory::DrawEllipse(). - Fixed some direct comparisons of double values. - Fixed detecting frames on channels that broadcast with separate "fields" instead of complete frames. - Made updating the editing marks during replay react faster in case the marks file has just been written (with a patch from Udo Richter). - Fixed horizontal scaling of subtitles (reported by Reinhard Nissl). - Stripped the note "The data returned by this function is only used for informational purposes (if any)" from the description of cDevice::GetVideoSize(). The VideoAspect is now used to properly scale subtitles. - Fixed cUnbufferedFile::Seek() in case it is compiled without USE_FADVISE (thanks to Juergen Lock). - Fixed the Language header of the Serbian translation file (thanks to Ville Skyttä). - Added anti-aliasing when upscaling bitmaps, which improves the display of SD subtitles when replayed on an HD OSD (thanks to Reinhard Nissl for his help in debugging). - Renamed cBitmap::Scale() to Scaled(), because it doesn't modify the bitmap itself, but rather returns a scaled copy. - Fixed the description of cReceiver in PLUGINS.html, regarding detaching a receiver from its device before deleting it (reported by Winfried Köhler). This change in behavior was introduced in version 1.5.7. - Fixed scaling subtitles in case the OSD size is exactly the same as the display size of the subtitles. - Added a missing initialization to sDvbSpuRect (reported by Sergiu Dotenco). - Replaced "%lld" and "%llX" print format specifiers with "PRId64" and "PRIX64" to avoid compiler warnings with gcc 4.5.2 (thanks to Sergiu Dotenco). On a personal note: I find it a step in the totally wrong direction that there have been macros introduced to work around this problem in the first place. There should have been "real" format specifiers defined that address this. These macros are nothing but an ugly workaround. - Added Cancel(3) to ~cTrueColorDemo() in the "osddemo" plugin (thanks to Reinhard Nissl). - Added a missing font deletion in cTrueColorDemo::Action() in the "osddemo" plugin (thanks to Reinhard Nissl). - Fixed a buffer overflow in cFont::Bidi() (thanks to Reinhard Nissl). - Added HD stream content identifiers to vdr.5 (thanks to Christoph Haubrich). - Made cRecordingInfo::Read(FILE *f) private to avoid calls to it from outside cRecordingInfo or cRecording (reported by Mika Laitio). - The dvbhddevice plugin is now part of the VDR distribution archive (thanks to Andreas Regel). - Removed an obsolete local variable in dvbsdffosd.c (thanks to Paul Menzel). - Fixed a possible NULL pointer dereference in osddemo.c (reported by Paul Menzel). - Now using pkg-config to get fribidi, freetype and fontconfig cflags and libs (thanks to Ville Skyttä). - The Makefile now also installs the include files (thanks to Ville Skyttä). - Added handling of "ANSI/SCTE 57" descriptors (thanks too Rolf Ahrenberg). - Avoiding an unecessary call to Recordings.ResetResume() (thanks to Reinhard Nissl).	2011-04-17 17:09:00 +02:00
Klaus Schmidinger	5619c0602b	Version 1.7.17 ... - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed following symbolic links in RemoveFileOrDir() (cont'd) (thanks to Steffen Barszus). - Changed the description of cDevice::GetSTC() to make it mandatory for devices that can replay. - Removed the check for positive STC values from cDvbSubtitleConverter::Action(). - Added cString::operator=(const char *String) (suggested by Antti Seppälä). - Some spelling fixes (thanks to Ville Skyttä). - Passing package name and version to xgettext (thanks to Ville Skyttä). - Made 'dist' target dependent on up to date *.po (thanks to Ville Skyttä). - Added Language and fixed Language-Team header of *.po (thanks to Ville Skyttä). - Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras). - Fixed detecting frames on channels that broadcast with 50 or 60 fps. This avoids artifacts during fast forward/rewind when replaying recordings from such channels. To fix the index of existing recordings from such channels, just delete the 'index' file of the recording and VDR will generate a new one the next time you play it. You should also change the line "F 25" to "F 50" in the 'info' file of that recording. - Added support for "registration descriptor" to 'libsi' and using it in pat.c (thanks to Rolf Ahrenberg). - Fixed unjustified log entries about changed channel pids (reported by Derek Kelly). - Added an include of VDR's 'Make.global' to libsi's Makefile (thanks to Rolf Ahrenberg). - Removed displaying the "contents" information from the "Classic VDR" and "ST:TNG Panels" skins, because it is often wrong and nothing but irritating. - Added typecasts to avoid gcc 4.5 warnings in switch statements on eKeys variables where additional 'k_...' flags are used. - Fixed inclusion of <stdarg.h> (thanks to Henning Heinold). - Changed "frame duration" to "frame rate" in vdr.5 (reported by Tobias Grimm). - Removing a cRemote from the Remotes list in case its initialization failed (thanks to Dominik Strasser). - Added LDFLAGS to the linker calls in the Makefiles (thanks to Joerg Bornkessel and Paul Menzel). - Now updating the 'frames per second' data in the list of recordings when a new recording is started that has a frame rate other than the default. - The include path to the freetype2 header files is now retrieved via a call to 'pkg-config --cflags freetype2' (suggested by Andreas Oberritter). - The OSD now has full TrueColor support. There can be several "pixmaps" that can be overlayed with alpha blending. All existing skins should work out of the box with the TrueColor OSD - the only exception being cOsd::GetBitmap(). Since the TrueColor OSD doesn't use bitmaps, this function will return a dummy bitmap, which may not be what the plugin expects. As long as this bitmap is only used for setting the palette, there is no problem. However, any other operations on this bitmap will have no effect. See the description of the cPixmap functions in osd.h for details about the new functionalities. The "ST:TNG Panels" skin has been enhanced to automatically use the TrueColor OSD if available. The "osddemo" plugin has been extended to show some of the possibilities of the TrueColor OSD if it is run on a system that actually provides TrueColor support. Thanks to Reinhard Nissl for some valuable input, help with debugging, and an implementation of the AlphaBlend() function. - Updated the Slovakian language texts (thanks to Milan Hrala). - Added Serbian language texts (thanks to Milan Cvijanovic). - Fixed reallocating memory in the "pictures" plugin (reported by Paul Menzel, with input from Oliver Endriss). - Fixed reallocating memory in cTsToPes::PutTs() (suggested by Oliver Endriss). - Now checking the result of all realloc() calls. - Fixed setting up the 'Recordings' menu in case there are several recordings with exactly the same name (reported by Marcus Hilbrich). - Setting the audio type of language descriptors to 0x00 in the PAT/PMT generator (thanks to Anssi Hannula). - Changed the compiler optimization flag to -O3, which gives quite a performance boost in the AlphaBlend() function. - While replaying, the editing marks are now updated every 10 seconds (based on a patch from Manuel Reimer). - Now reducing the thread and I/O priority cCuttingThread::Action() to make the foreground process more responsive (suggested by Frank Neumann). - Removed checking for minimum line length of 21 characters in the LIRC receiver code (reported by Gerald Dachs). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Now storing the original display size when handling DVB subtitles (thanks to Reinhard Nissl). - The original display size of subtitles is now used to scale them properly when displaying them on an HD OSD.	2011-03-19 19:02:09 +01:00
Klaus Schmidinger	58db02442b	Version 1.7.16 ... - Updated the Italian OSD texts (thanks to Diego Pierotto). - Added missing Dtypes for ATSC (thanks to Alex Lasnier). - Updated the Portuguese language texts (thanks to Cristiano A. Silva). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed the array size of Atypes in cPatFilter::Process() (thanks to Rolf Ahrenberg). - Added locking to the cCutter functions to avoid a crash in case CutRecording() is called from a plugin (reported by Andreas Mair). - Fixed DDS detection for HD resolution subtitles (thanks to Reinhard Nissl). - Fixed following symbolic links in RemoveFileOrDir(). - Added support for languages that are written right-to-left (based on a patch from Osama Alrawab). See INSTALL for information on how to turn this on. - Added Arabian language texts (thanks to Osama Alrawab).	2010-09-19 16:00:00 +02:00
Klaus Schmidinger	c2c45d68c6	Version 1.7.15 ... - Added Macedonian language texts (thanks to Dimitar Petrovski). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added handling of EnhancedAC3DescriptorTag (thanks to Eric Valette). - The default SVDRP port is now 6419 (registered with ICANN/IANA by Christian Tramnitz). Use '-p 2001' to switch back to the old port if necessary. - Updated the Italian OSD texts (thanks to Diego Pierotto). - cDvbDevice::ProvidesTransponder() now checks the modulation capabilities of the device (as far as the driver allows this). - Fixed cFrameDetector::Analyze() in case part of the data has been processed and there is less than MIN_TS_PACKETS_FOR_FRAME_DETECTOR left (reported by Derek Kelly). - Added a note about not deleting cDeviceHook objects to device.h. - Added user defined key kUser0 (suggested by Ulf Kiener). - Include paths are now added instead of overwriting INCLUDES in the Makefile (thanks to Paul Menzel). - The various modulation types are now taken into account when selecting a device for a recording or live viewing, so that devices that provide more capabilities are spared. - Fixed generating PMT language descriptors for multi language PIDs (thanks to Rolf Ahrenberg). - Transponders that use "8psk turbo fec" (a non-standard mode used by North American providers) are now identified by assuming that all 8psk transponders on DVB-S use "turbo fec". In order to determine whether a certain device can handle "turbo fec", the new driver flag FE_CAN_TURBO_FEC is checked. If your device can handle "turbo fec", and your driver doesn't have that flag, yet, you can apply the patch from ftp://ftp.tvdr.de/vdr/Developer/v4l-dvb-add-FE_CAN_TURBO_FEC.diff. A temporary macro in dvbdevice.c defines the flag for all those who don't need this in the driver, so that they can continue using an unmodified driver. Thanks to Derek Kelly for testing this. - Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk). - Fixed handling "none" color entries in XPM files (thanks to Thomas Günther). - Fixed a crash when creating a new channel if the channel list is empty (reported by Halim Sahin). - Updated the Czech OSD texts (thanks to Radek Stastny). - Fixed a possible out of buffer memory access in case of bad TS data (reported by Rolf Ahrenberg). - Implemented handling of HD resolution subtitles according to v1.3.1 of ETSI EN 300 743, chapter 7.2.1 (thanks to Rolf Ahrenberg). - The EPG data now handles stream components 5 (H.264-video) and 6 (HEAAC-audio). - Fixed a problem with external Dolby Digital processing via the '-a' option in live mode and with TS recordings (reported by Christopher Reimer). - Added handling MPEG audio types "ISO/IEC 14496-3 Audio with LATM transport syntax" and "ISO/IEC 13818-7 Audio with ADTS transport syntax" (suggested by Luis Fernandes). See man vdr(5) on how the APID section of channels has been extended to store this information. - Added detecting channels that use service type 0x16. - Added full handling of the stream types of Dolby Digital pids (thanks to Jose Alberto Reguero). - The new setup option "OSD/Number keys for characters" can be used to control whether the number keys can be used to enter characters in a text input field (suggested by Stefan Huskamp).	2010-06-06 14:49:00 +02:00
Klaus Schmidinger	5ce592e54a	Version 1.7.13 ... - Updated the Italian OSD texts (thanks to Diego Pierotto). - Changed the position of Sirius 4 to S4.8E in sources.conf (thanks to Alexander Gross). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Moved the declaration of cMenuCommands to menu.h, so that plugins can use it. - Added a note to the MANUAL, saying that adding new transponders only works if the "EPG scan" is active (suggested by Halim Sahim). - Improved handling frames at the beginning and end of a recording in cDvbPlayer for devices with large buffers (thanks to Reinhard Nissl). - Implemented cDeviceHook to allow plugins more control over which device can provide which transponder (thanks to Reinhard Nissl). - Implemented cDevice::GetCurrentlyTunedTransponder() (thanks to Reinhard Nissl). - Moved strictly necessary Makefile options into Make.global, which is included by all plugins (thanks to Paul Menzel). The Makefiles of existing plugins should be modified like this: ------------------------------------------------------------ --- PLUGINS/src/hello/Makefile 2009/10/18 14:00:07 2.1 +++ PLUGINS/src/hello/Makefile 2010/02/06 14:50:03 2.2 @@ -18,7 +18,7 @@ ### The C++ compiler and options: CXX ?= g++ -CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses +CXXFLAGS ?= -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses ### The directory environment: @@ -26,6 +26,10 @@ LIBDIR = ../../lib TMPDIR = /tmp +### Make sure that necessary options are included: + +include $(VDRDIR)/Make.global + ### Allow user defined options to overwrite defaults: -include $(VDRDIR)/Make.config ------------------------------------------------------------ - Added device definitions to the diseqc.conf file format, so that certain satellite positions can be limited to a given list of devices. This obsoletes the SOURCECAPS patch. - Keeping subtitles visible when pausing replay (thanks to Rolf Ahrenberg). - Fixed adding new transponders in case there is only a single channel in the channel list (reported by Halim Sahin). - The file name in the "Timers" menu now shows only the base name of the recording without the folder path (if any). Otherwise with long folder paths the actual recording name was not visible at all. - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Exported some libsi functions (thanks to Lucian Muresan). - Improved scalability of the default skins. - Fixed the German translation of "Folder name must not contain '%c'!" (thanks to Frank Schmirler). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Plugins can now define new sources. In order to implement this, the following changes were made: + The transponder parameter string is no longer interpreted by cChannel, but rather stored as is and used only by the respective device. That way plugins can use a channel's parameter string to store arbitrary data (see vdr.5). + The new class cSourceParam can be used by plugins to define new sources, and to implement OSD items that will be used in the channel editor for editing the source specific parameters of a channel (see dvbdevice.c for an example of how this is done for the default DVB devices). + Purely numerical values are no longer accepted in the 'source' parameter of a channel. This obsoletes the PLUGINPARAM patch. - Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras). - cSafeFile::Close() now flushes the file (suggested by Stephan Austermühle). - The option "Setup/DVB/Use Dolby Digital" now only controls whether Dolby Digital tracks appear in the "Audio" menu. Dolby Digital is always recorded. This obsoletes the DOLBYINREC patch.	2010-02-28 16:07:00 +01:00
Klaus Schmidinger	09a17d56e2	Version 1.7.12 ... - Changed the EVCONTENTMASK_* macros to enums and changed "mask" to "group". - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - The "Edit timer" menu can now set the folder for the recording from a list of folders stored in "folders.conf". - Updated the Italian OSD texts (thanks to Diego Pierotto). - If svdrphosts.conf contains only the address of the local host, the SVDRP port is opened only for the local host (thanks to Manuel Reimer). - Renamed 'runvdr' to 'runvdr.template' and no longer copying it to the BINDIR in 'make install' (thanks to Martin Dauskardt). - Added plain text error messages to log entries from cOsd::SetAreas() (suggested by Rolf Ahrenberg). - cPalette::ClosestColor() now treats fully transparent colors as "equal"; improved cDvbSpuBitmap::getMinBpp() (thanks to Matthieu Castet and Johann Friedrichs). - The new setup option "Miscellaneous/Channels wrap" controls whether the current channel wraps around the beginning or end of the channel list when zapping (thanks to Matti Lehtimäki). - Fixed determining the frame duration on channels where the PTS deltas jitter by +/-1 around 1800. - The PCR pid in generated PMTs is now set to the channel's PCR pid again. - Fixed determining the frame duration on channels where the PTS deltas jitter by +/-1 around 3600. - The PCR pid is now recorded for channels where this is different from the video PID. To facilitate this, the interfaces of cTransfer, cTransferControl, cRecorder and cReceiver have been modified, so that the PIDs are no longer given in separate parameters, but rather the whole channel is handed down for processing. The old constructor of cReceiver is still available, but it is recommended to plugin authors that they switch to the new interface as soon as possible. When replaying such a recording, the PCR packets are sent to PlayTsVideo() - The files "commands.conf" and "reccmd.conf" can now contain nested lists of commands. See vdr.5 for information about the new file format.	2010-01-31 15:42:00 +01:00
Klaus Schmidinger	939081e274	Version 1.7.11 ... - Fixed resetting the file size when regenerating the index file. - The new function cDevice::PatPmtParser() can be used in derived devices to access the PAT/PMT of the currently replayed material. - Updated the Italian OSD texts (thanks to Diego Pierotto). - The PCR pid in generated PMTs is now set to 0x1FFF ("no PCR pid") in cPatPmtGenerator::GeneratePmt(), because VDR doesn't record the PCR pid. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - The 'sky' plugin is no longer part of the VDR source. - Improved SPU handling on devices with limited OSD capabilities (thanks to Matthieu Castet). - Several code modifications to avoid compiler warnings (thanks to Winfried Köhler). - Added stream type 11172 AUDIO to cPatPmtParser::ParsePmt() (thanks to Johann Friedrichs). - Removed debug output of '-' from cTransfer::Receive(). - Added defines for large files to the 'newplugin' script (reported by Udo Richter). - Removed the workaround for short channel names of "Kabel Deutschland", because apparently they now have their data according to the DVB standard (thanks to Johann Friedrichs). - Some fixes to dvbspu.[hc] (thanks to Johann Friedrichs). - Fixed a busy loop when moving editing marks (thanks to Johann Friedrichs). - Updated sources.conf (thanks to Derek Kelly). - Modified cCharSetConv so that it can be used to convert from "whatever VDR uses" to a given code (thanks to Joachim Wilke). - Channel names containing commas are now handled correctly in channels.conf. If a channel's short name contains a comma, it is replaced with a '.'. - cDevice now logs the device number when a new device is created. - Fixed handling STREAMTYPE_11172_AUDIO in cPatPmtParser::ParsePmt(). - cParsePatPmt now has functions to retrieve the audio, dolby and subtitle pids. - cPatFilter::Process() now only stores CA descriptors for video and audio pids (thanks to Francesco Saverio Schiavarelli for reporting a problem with channels that have some encrypted components that VDR doesn't use). - cDevice::AddPid() now stores the stream type of the given pid (thanks to Andreas Regel). - Added cFont::FontName() and cFont::Size() (thanks to Andreas Regel). - cPatPmtParser now also stores the audio stream types. - The support for full featured DVB cards of the TT/FuSi design has been moved into the new plugin 'dvbsddevice'. On systems that use such a card as their primary device, this plugin now needs to be loaded when running VDR in order to view live or recorded video. If the plugin is not loaded, the card will be treated like a budget DVB card, and there will be no OSD or viewing capability. - Fixed handling the "CA PMT" generation (revised a change not mentioned in version 1.7.9's changes, which caused a malfunction with Conax and Viaccess CAMs). - Fixed stopping subtitle display when switching the primary device (thanks to Anssi Hannula). IMPORTANT NOTE TO PLUGIN AUTHORS: a plugin that implements a derived cDevice class that can replay video must now call the MakePrimaryDevice() function of its base class. - Fixed compiler warnings "format not a string literal and no format arguments" in some syslog calls (thanks to Rolf Ahrenberg). - The new command line options --edit and --genindex can be used to edit a recording or generate its index without actually starting the entire VDR (based on a patch from Helmut Auer). - Improved the description of the transponder parameters in vdr.5 (thanks to Winfried Köhler). - Avoiding setting the video stream type to 2 if the vpid is 0 (problem reported by Arthur Konovalov). - Implemented handling the "Content Descriptor" (based on a patch from Rolf Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the textual representation of the content descriptors as "genre". The epg.data file stores the genre using the tag character 'G'. - Implemented handling the "Parental Rating Descriptor" (based on a patch from Rolf Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the parental rating (if given) in their event displays. The epg.data file stores the parental rating using the tag character 'R'. IMPORTANT NOTE: if VDR doesn't display a parental rating, this does not necessarily mean that the given programme is suitable for all audiences! - Rearranged cEvent members to minimize memory waste. - After a CLRE command, no further EPG processing is now done for 10 seconds, so that data sent with subsequent PUTE commands doesn't interfere with data from the broadcasters (suggested by Helmut Auer). - Added support for DVB cards with multiple fontends. Note that this only works for DVB cards where each frontend can be used independently of all the others on the same adapter. - Fixed plugin arguments corruption with glibc 2.11 on x86_64 (thanks to Anssi Hannula).	2010-01-06 13:34:00 +01:00
Klaus Schmidinger	ea01358b3b	Version 1.7.10 ... - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed wrong bracketing in cChannel::SubtitlingType() etc. (thanks to Rolf Ahrenberg). - Fixed not logging changes for channels that have no number (reported by Timothy D. Lenz). - Changed the project's URLs and email to tvdr.de. - Added Lithuanian language translations (thanks to Valdemaras Pipiras). - Updated Chinese language texts (thanks to Nan Feng). - Only checking DVB_API_VERSION to be >=5 in order to stay compileable in case the DVB API version number is increased (the API claims to always be backward compatible). - Fixed saving terminal settings when running in background (thanks to Manuel Reimer). - Fixed cFrameDetector::Analyze() to handle video streams where the frame type is not detectable from the first TS packet of a frame. - Fixed writing the PCR pid into the PMT in cPatPmtGenerator::GeneratePmt() (reported by Rene van den Braken). - Added Slovakian language texts (thanks to Milan Hrala). - Fixed EntriesOnSameFileSystem() to avoid using f_fsid, which may be 0 (thanks to Frank Schmirler). - Fixed starting a recording at an I-frame. - Fixed generating the index for recordings from channels that put a whole GOP into one payload unit. - The index file for TS recordings is now regenerated on-the-fly if a recording is replayed that has no index. This can also be used to re-create a broken index file by manually deleting the index file and then replaying the recording (at least until the index file has been generated). - The cRingBufferLinear::Read() function now returns -1 and sets errno to EAGAIN if the buffer is already full. - Fixed handling DVB subtitles for PES recordings (thanks to Rolf Ahrenberg). - Added the audio id to the call of PlayAudio() in cDevice::PlayTsAudio() (thanks to Andreas Schaefers). - Fixed references to old *.vdr file names in MANUAL (reported by Arthur Konovalov). - Reverted "Removed limitation to PAL resolution from SPU handling" because it cause nothing but trouble. Besides, the core VDR doesn't use this, anyway. - Fixed the default value for "Pause key handling" in the MANUAL (reported by Diego Pierotto).	2009-11-22 15:58:00 +01:00
Klaus Schmidinger	c296647594	Version 1.7.3 ... - Updated the Russian OSD texts (thanks to Oleg Roitburd). - Fixed handling the 'pointer field' in generating and parsing PAT/PMT (thanks to Frank Schmirler). - Fixed handling modulation types for DVB-S transponders when processing the NIT. - Changed cDvbDevice::GrabImage() to use V4L2 (thanks to Marco Schl��ler). - Added a poll to cDvbDevice::PlayVideo() and cDvbDevice::PlayAudio() to avoid excessive CPU load (this is just a makeshift solution until the FF DVB cards can play TS directly). - The recording format is now Transport Stream. Existing recordings in PES format can still be replayed and edited, but new recordings are done in TS. All code for recording in PES has been removed. The following changes were made to switch to TS recording format: + The index file format has been changed to support file sizes of up to 1TB (previously 2GB), and up to 65535 separate files per recording (previously 255). + The recording file names are now of the form 00001.ts (previously 001.vdr). + The frame rate is now detected by looking at two subsequent PTS values. The "frame duration" (in multiples of 1/90000) is stored in the info.vdr file using the new tag F (thanks to Artur Skawina for helping to get the IndexToHMSF() calculation right). + Several functions now have an additional parameter FramesPerSecond. + Several functions now have an additional parameter IsPesRecording. + The functionality of cFileWriter was moved into cRecorder, and cRemux is now obsolete. This also avoids one level of data copying while recording. + cRemux, cRingBufferLinearPes, cTS2PES and all c*Repacker classes have been removed. + A PAT/PMT is inserted before every independent frame, so that no extra measures need to be taken when editing a recording. + The directory name for a recording has been changed from YYYY-MM-DD-hh[.:]mm.pr.lt.rec (pr=priority, lt=lifetime) to YYYY-MM-DD-hh.mm.ch-ri.rec (ch=channel, ri=resumeId). Priority and Lifetime are now stored in the info.vdr file with the new tags P and L (if no such file exists, the maximum values are assumed by default, which avoids inadvertently deleting a recording if disk space is low). No longer storing Priority and Lifetime in the directory name avoids starting a new recording if one of these is changed in the timer and the recording is re-started for some reason. Instead of Priority and Lifetime, the directory name now contains the channel number from which the recording was made, and the "resume id" of this instance of VDR. This avoids problems if several VDR instances record the same show on different channels, or even on the same channel. The '-' between channel number and resumeId prevents older versions of VDR from "seeing" these recordings, which makes sure they won't even try to replay them, or remove them in case the disk runs full. + The semantics of PlayTs*() have been changed. These functions are now required to return the given Length (which is TS_SIZE) if they have processed the TS packet. + The files "index", "info", "marks" and "resume" within a TS recording directory are now created without the ".vdr" extension. + The "resume" file is no longer a binary file, but contains tagged lines to be able to store additional information, like the selected audio or subtitle track. + cDevice::StillPicture() will now be called with either TS or PES data. + cDvbPlayer::Goto() no longer appends a "sequence end code" to the data. If the output device needs this, it has to take care of it by itself. - Fixed cPatPmtParser::ParsePmt() to reset vpid and vtype when switching from a video to an audio channel (thanks to Reinhard Nissl). - cDvbDevice now uses the FE_CAN_2G_MODULATION flag to determine whether a device can handle DVB-S2. The #define is still there to allow people with older drivers who don't need DVB-S2 to use this version without pathcing.	2009-01-06 20:31:53 +01:00
Klaus Schmidinger	c848ab793a	Version 1.7.1 ... - Adapted the tuning code to the new DVBFE_SET_DELSYS API (thanks to Reinhard Nissl). VDR now uses the driver from http://jusst.de/hg/multiproto_plus. - Updated the Italian OSD texts (thanks to Diego Pierotto). - Removed obsolete $(NCURSESLIB) from the Makefile. - Implemented handling the standard component descriptor for AC3 (stream=4), as it will soon be used by the German ARD channels (thanks to Michael Pennewiß for advance information about this change). The previously used "Premiere pseudo standard" (stream=2, type=5) still works, but has apparently been wrongfully used by broadcasters from the beginning. - Added missing description of the 'S' channel parameter to vdr.5 (reported by Reinhard Nissl). - The SVDRP signon message now indicates the character encoding in use, as in "220 video SVDRP VideoDiskRecorder 1.7.1; Fri May 2 16:17:10 2008; ISO-8859-1". This may be useful for instance for external tools that provide EPG data, so that they can correctly encode the strings. - No longer calling FcFini() to avoid problems with older (broken) versions of fontconfig (suggested by Edgar Toernig). - Removed the compile time option VFAT to allow users of precompiled binary distributions to have full control over whether or not to use the --vfat option at runtime (suggested by Michael Nork). - First step towards switching to TS (Transport Stream) as recording format: + The new function cDevice::PlayTs() is used to play TS packets. + The new functions cDevice::PlayTsVideo() and cDevice::PlayTsAudio() are used to play video and audio TS packets, respectively. + The new function cAudio::PlayTs() is used to play audio TS packets. + The new class cPatPmtGenerator is used to generate a PAT/PMT pair that precedes the TS data in Transfer Mode. + The new class cPatPmtParser is used by cDevice to parse the PAT/PMT data in a TS in order to find out which streams it contains. + The new class cTsToPes is used to convert TS packets to a PES packet. + cTransfer no longer uses cRemux, and doesn't run a separate thread any more. It just generates a PAT/PMT and sends all received TS packets to the primary device's PlayTs(). + Live subtitle display no longer uses a ring buffer and separate thread. + cPesAssembler has been removed. Old VDR recordings only contain complete PES packets. + Since a TS needs to have a PAT/PMT, which requires the video stream type to be explicitly given, the format of the VPID field in the channels.conf file and the SVDRP commands NEWC/MODC/LSTC has been extended. The video stream type now follows the VPID and optional PPID, separated by an '=' sign. - Updated the sources.conf file (thanks to Oleg Roitburd). - Fixed a possible integer overflow in GetAbsTime() (thanks to Alexander Rieger). - Fixed a problem with calling isyslog() from within the SignalHandler() (thanks to Udo Richter). - Replaced the Finnish language code "smi" with "suo" (thanks to Rolf Ahrenberg). - Fixed wrong value for TableIdBAT in libsi/si.h (thanks to Winfried Köhler). - Errors in config files no longer keep VDR from starting. - Removed unneeded include files <linux/dvb/dmx.h> und <time.h> from remux.h (reported by Tobias Grimm).	2008-09-06 18:00:00 +02:00
Klaus Schmidinger	771986b89f	Version 1.7.0 ... - Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto. Note that the channels.conf file now supports additional parameters, so you may want to make sure you have a backup of this file in case you need to go back to the previous version of VDR! - Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl). - Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard Nissl). - Improved logging system time changes to avoid problems on slow systems under heavy load (suggested by Helmut Auer). - Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf Ahrenberg). - Fixed initializing the timer's flags in the cTimer copy constructor (thanks to Andreas Mair). - Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald). - Increased the time between checking the CAM status to 500ms to avoid problems with some CAMs (reported by Arthur Konovalov).	2008-04-13 18:00:00 +02:00
Klaus Schmidinger	0872cba0a1	Version 1.5.17 ... - Updated the Swedish OSD texts (thanks to Tomas Berglund). - Made the 'pic2mpg' script of the 'pictures' plugin work with uppercase filename extensions and relative paths (thanks to Stefan Wagner for reporting this one). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Updated the Dutch OSD texts (thanks to Johan Schuring). - Stripping control codes 0x86 and 0x87 from SI strings. - Updated French language texts (thanks to Jean-Claude Repetto). - Fixed handling 3 and 4 byte UTF-8 symbols in Utf8CharGet() (thanks to Andreas Mair). - Fixed a crash in cFreetypeFont::DrawText() if an unknown symbol is encountered (thanks to Tobias Grimm). Unknown symbols are replaced with a '?'. - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Updated the Czech OSD texts (thanks to Vladimír Bárta and Jiri Dobry). - Updated the Turkish OSD texts (thanks to Oktay Yolgeçen). - The 'plugins' target in the Makefile now returns an error exit code if one of the plugins failed to compile (suggested by Tobias Grimm). - Rendering the non-breaking space symbol as a blank (thanks to Tobias Grimm). - Changed the default character set for SI data from ISO6937 (as required by the DVB standard ETSI EN 300 468) to ISO-8859-9, in order to work around the stupidity of some providers, who actually use ISO-8859-9, but fail to correctly announce that.	2008-03-02 18:00:00 +01:00
Klaus Schmidinger	fc4c8740a7	Version 1.5.13 ... - Fixed the declaration of cSubtitleObject::Decode8BppCodeString() (thanks to Gregoire Favre). - The new setup option "Miscellaneous/Emergency exit" can be used to turn off the automatic restart of VDR in case a recording fails for some reason. - The kInfo key is now propagated to any open menu, so that it can react to it in a context sensitive manner (suggested by Andreas Brugger). If there is no menu open it will show the info of the current broadcast or replay. - cTimeMs now uses the monotonic clock, if available (thanks to Petri Hintukainen). - Fixed cVector::Clear() and cStringList::Clear(). - Added cString::Truncate(). - Fixed the "i18n:" target in the "newplugin" script, so that it can create the initial *.pot file. - Fixed handling the '-l' option. - Fixed error handling in cCuttingThread::Action() (thanks to Udo Richter). - Fixed a loss of the date display in the "classic" skin's main menu (reported by Andreas Brugger). - Added a missing setting of lastFreeMB in cMenuMain::Update() (reported by Andreas Brugger). - Added '-Wno-parentheses' to the compiler options in order to avoid silly compiler warnings for expressions like 'a || b && c', where GCC 4.3 wants to force the programmer to write 'a || (b && c)', while everybody knows that '&&' links stronger than '||' (reported by Tobias Grimm). - Updated the Hungarian language texts (thanks to István Füley). - Fixed displaying weekday names in the Schedule menu if the system uses UTF-8 (reported by Jiri Dobry). - The new plugin "pictures" implements a simple picture viewer. See PLUGINS/src/pictures/README for details. - The automatic shutdown is now suppressed if the remote control is currently disabled (suggested by Helmut Auer, implemented by Udo Richter). - Added a section about "Logging" to PLUGINS.html (suggested by Torsten Kunkel). - Enhanced the SVDRP command CLRE to allow clearing the EPG data of a particular channel (thanks to Benjamin Hess).	2008-01-13 18:00:00 +01:00
Klaus Schmidinger	182cd78af0	Version 1.5.11 ... - Fixed checking compatibility mode for old subtitles plugin (thanks to Marco Schlüßler). - Updated the French OSD texts (thanks to Michael Nival). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Italian OSD texts (thanks to Diego Pierotto). - The "Play" key now starts replay of the selected recording in the Recordings menu (thanks to Ville Skyttä); - Improved shutdown handling (thanks to Udo Richter). - Housekeeping now waits for a while after a replay has ended (thanks to Udo Richter). - Added more special characters to the list of allowed characters when entering strings (thanks to Thomas Günther). - Added Ukrainian language texts (thanks to Yarema Aka Knedlyk). - Added a workaround for recovering from wrongfully interpreted "pre 1.3.19 PS1 packets". - Fixed a possible blocking in replay when subtitles are active. - Fixed displaying subtitles in live mode. - Fixed handling CONFDIR (thanks to Rolf Ahrenberg). - Added some missing 'const' keywords (thanks to Sascha Volkenandt). - The 'Allowed' parameter in cMenuEditStrItem() is now NULL by default, which results in using tr(FileNameChars) (suggested by Thomas Günther). - Added a missing '.' to the date returned by DayDateTime() (thanks to Lauri Nurmi). - Improved the 'i18n' target in the Makefile to avoid unnecessary work (thanks to Stefan Huelswitt). The 'newplugin' and 'i18n-to-gettext.pl' scripts have been changed accordingly. Plugin authors may want to adjust the 'i18n' target of their Makefiles. - Fixed a crash if no fonts are found (thanks to Mario Ivankovits and Clemens Kirchgatterer). - Fixed decoding filename characters in case there are not two hex digits after the '#' (reported by Helmut Auer).	2007-11-04 18:00:00 +01:00
Klaus Schmidinger	dbf38b7c68	Version 1.5.10 ... - Implemented handling DVB subtitles (thanks to Marco Schlüßler, and also to Pekka Virtanen for writing the subtitle plugin, which helped in implementing subtitle handling in VDR). - The new remote control key "Subtitles" can be used to bring up the list of available subtitles. - The new setup option "DVB/Subtitle languages" can be used to define the preferred languages for subtitles. - Fixed selecting the audio track when pressing Ok in the Audio menu (thanks to Marco Schlüßler). - Implemented display of DVB subtitles in live viewing mode. - Implemented subtitle track selection. - Implemented bitmap color reduction and shrinking to display subtitles even on devices that can't display the necessary number of colors. - Added compatibility mode for playback of recordings made with the subtitles plugin (with some help from Rolf Ahrenberg). - The new setup option "DVB/Subtitle offset" can be used to shift the location of the subtitles in the vertical direction. - The new setup options "DVB/Subtitle foreground/background transparency" define an additional level of transparency for the foreground and background color of subtitles. - Existing recordings made with the subtitle plugin can be given an 'X' record in their info.vdr file, so that subtitles can be automatically selected upon replay, according to the preferred language setup, as in X 3 03 ger deutsch (see vdr.5). Note that these entries need to be added in the proper sequence, so that they correspond with the actual track languages in the recording. - Now generating translation files without line numbers to avoid unnecessarily large diffs. Plugin authors may want to replace the -F option with --no-location in the xgettext and msgmerge calls in their Makefiles. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added a missing Channels.SetModified(true) call when deleting or moving a channel in the Channels menu (reported by Halim Sahin). - Fixed a missing '-' at the next to last line of SVDRP help texts (reported by Denis Knauf). - Added a missing SetVolumeDevice() call in cDevice::SetPrimaryDevice() (reported by Reinhard Nissl). - Fixed a crash when pressing Left while at the first character of a cMenuEditStrItem (thanks to Christian Wieninger). - Only creating a new cDvbOsdProvider in cDvbDevice::MakePrimaryDevice() if 'On' is true (i.e. this device is being made the primary device). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed handling reallocated memory in cCharSetConv::Convert() (reported by Udo Richter). - Fixed a new[]/delete mismatch in cMenuEditStrItem::LeaveEditMode() (thanks to Udo Richter). - Implemented sending all frames to devices that can handle them in fast forward trick speeds (thanks to Timo Eskola). - Updated the Hungarian language texts (thanks to Thomas Günther). - Fixed description of DeviceSetAvailableTrack() and cReceiver(), and added an example ~cMyReceiver() in PLUGINS.html (thanks to Marco Schlüßler). - Improved the description of where logging goes in the INSTALL file (thanks to Elias Luttinen). - Added a note about how to initiate internationalization support to the README.i18n file. The Makefile generated by the 'newplugin' script now has the 'i18n' target automatically create an initial 'po/pluginname.pot' file. Plugin authors may want to add the '$(I18Npot)' dependency to the 'i18n' target in their Makefiles, as in i18n: $(I18Npot) $(I18Nmo) (based on a suggestion by Torsten Kunkel). - Removed a duplicate ',' from the ca_ES.po file (thanks to Thomas Günther). - Added the 'ß' character to the "allowed characters" in the de_DE.po file (suggested by Thomas Günther). - Made the default copy ctor of cRecording private (thanks to Markus Hahn). Same for the assign operator. - Added cRecording::Undelete() (based on a patch from Markus Hahn). - Added cDevice::CloseFilter() to allow a device to have complete control over both opening and closing section filters (thanks to Rolf Ahrenberg). - Some fixes to PLUGINS.html (thanks to Rolf Ahrenberg).	2007-10-14 18:00:00 +02:00
Klaus Schmidinger	46c882c04d	Version 1.5.9 ... - Fixed handling locale directories with a large number of entries (thanks to Anssi Hannula). - Updated Turkish language texts (thanks to Oktay Yolgeçen). - Fixed stripping the context in I18nTranslate() (reported by Christian Wieninger). - Fixed detecting whether a particular locale is actually supported. - Added a note about LANG having to be set to a valid locale in INSTALL (suggested by Matthias Fechner). - Fixed some compiler warnings with gcc-4.2.0 (thanks to Matthias Schwarzott). - Fixed setting the locale file name in i18n-to-gettext.pl (thanks to Matthias Schwarzott). - Changed the default for LOCDIR in Makefile and Make.config.template to "./locale", so that internationalization works by default when running VDR from within its source directory (suggested by Anssi Hannula). - Added the new i18n macro trVDR(), which can be used by plugins to mark texts they want to reuse from VDR's core translations (suggested by Matthias Becker). - VDR now uses the default configuration directory as defined in the CONFDIR varable in the Makefile (thanks to Thomas Schmidt). - The SVDRP command LSTC can now list the channels with group separators if the option ':groups' is given (thanks to Andreas Mair). - Added a missing error report to cCuttingThread::Action() (thanks to Udo Richter). - There can now be more than one OSD at the same time. At any given time, however, only one of them can be active (and thus visible). This is to allow displaying things like subtitles in an easy way. A cOsd therefore now has a "Level", and only the OSD with the smallest level will be displayed. The level 0 OSD is special, and there can only be one with this level. If there is more than one OSD with a particular level, only the one that was created first will be displayed. Plugins that provide an OSD need to adjust their cOsdProvider::CreateOsd() function to hand through the Level. - Fixed checking for ttDolbyLast in cDevice::SetCurrentAudioTrack() (thanks to Marco Schlüßler).	2007-08-26 18:00:00 +02:00
Klaus Schmidinger	e5a2aa41c9	Version 1.5.8 ... - Added missing install-i18n to the install target in the Makefile (reported by Joachim Wilke). - Fixed a faulty comment in Make.config.template (reported by Marco Schlüßler). - Improved i18n-to-gettext.pl (thanks to Matthias Schwarzott). - Moved the "all" target in plugin Makefiles before the "Implicit rules", so that a plain "make" will compile everything (suggested by Matthias Schwarzott). The "newplugin" script has been changed accordingly. Plugin authors may want to change their Makefiles, too. - Added DESTDIR and PREFIX handling to the Makefile (thanks to Matthias Schwarzott). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added internationalization to the "skincurses" plugin (thanks to Rolf Ahrenberg). - Checking the string for NULL in I18nTranslate(). - Updated the French OSD texts (thanks to Bruno Roussel). - Some optimizations in cDvbDevice::SetChannelDevice() (thanks to Tobias Bratfisch). - Optimized cMenuEditChrItem::Set() (thanks to Tobias Bratfisch). - Optimized cNitFilter::Process() (thanks to Tobias Bratfisch). - Reduced the number of time(NULL) calls in vdr.c's main loop to a single call (thanks to Tobias Bratfisch). - Changed cBitmap::DrawText() to always draw the background unless ColorBg is clrTransparent (thanks to Christoph Haubrich). - The "Setup/OSD/Language" menu now only shows those languages that actually have a locale (suggested by Anssi Hannula). - Now using setenv() instead of setlocale() to set the language for gettext() (suggested by Anssi Hannula; thanks also to Ludwig Nussel for a hint on using _nl_msg_cat_cntr). - When scanning the locale directory, VDR now explicitly looks for a file named vdr.mo. Text files for plugins are now named "vdr-name.mo", when "name" is the name of the plugin. The "newplugin" script has been changed accordingly, and plugin authors should change their Makefiles, too.	2007-08-19 18:00:00 +02:00
Klaus Schmidinger	4c65b525dc	Version 1.5.7 ... - All logging now goes to LOG_ERR, because some systems split error, info and debug messages into separate files, which repeatedly caused extra efforts to find out when incomplete log excerpts were attached to problem reports in the past. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed a problem with characters >0x7F in the modified version of skipspace() (thanks to Marco Schlüßler). - Fixed a bug I introduced when simplifying the original patch for detecting Premiere NVOD channel links (crash reported by Malte Schröder). - Internationalization is now done with 'gettext' (following a suggestion by Lucian Muresan). Plugin authors may want to use the Perl script 'i18n-to-gettext.pl' to convert their internationalized texts to the gettext format (see the instructions inside that script file). The function cPlugin::RegisterI18n() is still present for compatibility, but doesn't have any more functionality. So plugins that don't convert their texts to the gettext format will only present English texts. See PLUGINS.html, section "Internationalization", for instructions on how to make strings in arrays translatable. See README.i18n for information on how to create new or maintain existing translations. - The three letter language codes and their aliases are stored in i18n.c, and each translation file only contains one of them to link that language name to the code. - The 'newplugin' script has been extended to generate the Makefile section for i18n support. - The parameter OSDLanguage in 'setup.conf' is now a string and holds the locale code of the selected OSD language (e.g. en_US). If Setup.OSDLanguage is not set to a particular locale that is found in VDR's locale directory, the locale as defined in the system environment is used by default. - The list of tracks given in cStatus::SetAudioTrack() is now NULL terminated, so that plugins can actually use all the strings in the list, not just the one pointed to by Index (thanks to Alexander Rieger). - Fixed handling kLeft in the calls to cStatus::MsgOsdTextItem() (thanks to Alexander Rieger). - Added the "...or (at your option) any later version" phrase to the license information of all plugins, and also the 'newplugin' script (suggested by Ville Skyttä). Plugin authors may want to consider doing the same. - Fixed the link to the GPL2 at http://www.gnu.org in vdr.c (thanks to Ville Skyttä). - cBitmap::SetXpm() now checks whether the given Xpm pointer is not NULL, to avoid a crash with files that only contain "/* XPM */" (suggested by Andreas Mair). - Added a debug error message to cReceiver::~cReceiver() in case it is still attached to a device (thanks to Reinhard Nissl).	2007-08-12 18:00:00 +02:00
Klaus Schmidinger	b1e4da3be6	Version 1.5.4 ... - Increased APIVERSION (forgot to do that in 1.5.2 and 1.5.3). - Fixed a crash in i18n character set conversion (thanks to Alexander Riedel, Jose Alberto Reguero and Christian Wieninger for patches that cured part of the problem). - Adjusted the 'skincurses' plugin to UTF-8 handling. - Using nl_langinfo(CODESET) to determine the local codeset to use (thanks to Thomas Günther). The codeset names in 'libsi/si.c' have been changed to the canonical spelling with '-' (thanks to Ludwig Nussel for pointing this out). - Modified handling invalid characters in VFAT mode. - Replaced strn0cpy() with Utf8Strn0Cpy() where necessary. - Now using 'fontconfig' to determine which fonts to use (thanks to Anssi Hannula for code and hints on how to do this). - If no fonts are installed, VDR now uses a dummy font that doesn't actually draw any text, and logs an error message. - The new function cFont::CreateFont() can be used by plugins to create and use fonts of their own, independent of VDR's standard fonts. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Changed the parameter "OSD font" to "Default font" in "Setup/OSD" (suggested by Rolf Ahrenberg). - Fixed handling detached processes in SystemExec() (thanks to Udo Richter). - The info.vdr file now also stores the name of the channel, and the new function cRecordingInfo::ChannelName() returns this information if available (based on a patch from Alexander Hans). - The new function cOsd::SetOsdPosition() can be used to dynamically change the position and size of the OSD (based on a request from Christoph Haubrich). Plugins that implement skins should no longer use Setup.OSDWidth etc. directly, but should rather use cOsd::OsdWidth() etc. instead. Currently a change to the OSD position will only apply to newly opened OSDs.	2007-06-17 18:00:00 +02:00
Klaus Schmidinger	b9b9ace9a8	Version 1.5.3 ... - Fixed some spelling errors in 'newplugin' (thanks to Ville Skyttä). - Fixed a busy loop in fast forward if the next video data file is missing (thanks to Reinhard Nissl). - Fixed handling frequencies in NitFilter::Process() (thanks to Anssi Hannula). - Fixed a race condition with signal handlers at program exit (thanks to Udo Richter). - Non-primary devices in Transfer mode are now also used for recording (thanks to Anssi Hannula). - Fixed handling ChannelUp/Down keys if there is currently a replay running (thanks to Marco Schlüßler). - The new SVDRP command REMO can be used to turn VDR's remote control off and on in case other programs need to be controlled (based on patches from Krzysztof Parma and Helmut Auer). - Increased the maximum number of CA system ids to cope with the AlphaCrypt CAM's version 3.11 firmware. - Fixed getting the code setting from the locale (thanks to Matthias Schwarzott). - Implemented support for Freetype fonts (based on a patch from Alexander Riedel). The font names and sizes can be adjusted in the "Setup/OSD" menu. Note that VDR now requires freetype fonts to be installed in /usr/share/fonts/truetype. - If the OSD device in use has at least 8bpp bitmap depth and this is also used by the current skin, Freetype fonts are displayed "anti-aliased". The new setup parameter "OSD/Anti-alias" can be used to turn this off. - The new function cOsd::SetAntiAliasGranularity() can be used to help the OSD in managing the available color palette entries when doing anti-aliasing. Skins that use 8bpp bitmaps can call this function with the maximum number of colors used, and the maximum number of color combinations. The OSD will then evenly split the available palette entries between the various colors combinations, so that fonts can be "anti-aliased". By default a total of 10 colors and 10 combinations is assumed. - The pixel fonts have been completely removed from the VDR source. - VDR is now "UTF-8 aware". It handles strings according to the character encoding used on the user's system. All internationalization strings and incoming SI data are converted to the system encoding. - Plugins that handle strings need to be aware that on systems with UTF-8 encoding a "character symbol" may consist of more than a single byte in memory. The functions and macros named Utf8...() can be used to handle strings without needing to care about the underlying character encoding (see tools.h for details). - Even though the weekdays of repeating timers are presented to the user as UTF-8 characters in the OSD, the timers.conf file and the SVDRP timer commands still use single byte characters ("MTWTFSS") to make sure this information is handled correctly between systems with different character encodings. - Added a missing i18n string for "CAM" in the Turkish OSD texts. - Improved editing strings that are too long to fit into the editable area. - Changes to the OSD settings in the "Setup/OSD" menu now immediately take effect when the "Ok" key is pressed.	2007-06-10 18:00:00 +02:00
Klaus Schmidinger	a592125294	Version 1.5.2 ... - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed handling user activity for shutdown, which I had messed when adopting Udo's original patch (thanks to Udo Richter). - Added Turkish language texts (thanks to Oktay Yolgeçen). - Added missing rules for generating iso8859-13 font to Makefile. - 'libsi' now converts the incoming strings into the system's character set according to the DVB standard. The system's character set is determined from the LANG environment variable. If no recognizable setting can be found, no conversion will take place. Note that currently only the strings received from the SI data stream are converted, there have not been any changes regarding displaying UTF-8 characters on the OSD, yet - this will follow in one of the next steps. With this conversion, it should now be safe to run VDR on a UTF-8 file system, because all incoming characters are converted to UTF-8. This will most likely result in wrong characters being displayed on the OSD (because there UTF-8 is not known, yet), but the file names should be ok (haven't tested this myself, though, because I don't do UTF-8 - so please be very careful when testing!). There's one piece of bad news here: the German pay-tv broadcaster Premiere apparently encodes all EPG strings as ISO8859-1, but fails to correctly mark these strings as such. Therefore 'libsi' (following the DVB standard) considers the strings to be encoded in the default ISO6937 and converts them to whatever the system's character set is. This, of course, results in wrong umlauts. On its old transponder, the ProSieben/SAT.1 channels also had their EPG data wrongly encoded, but apparently on the new transponder they started broadcasting on this month, they got it right.	2007-04-22 18:00:00 +02:00
Klaus Schmidinger	9f42c33ef6	Version 1.5.1 ... - Added cDevice::HasCi() so that devices with Common Interface can be avoided when tuning to an FTA channel, thus preserving the CAM resources even on budget DVB cards (suggested by Petri Helin). - Fixed i18n characters for the Hungarian texts (thanks to Thomas Günther). - Now using cPipe instead of popen() in cCommand::Execute() to avoid problems with open file handles when starting background commands (thanks to Reinhard Nissl). - Removed 'assert(0)' from cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler). - Fixed a possible crash when loading an invalid XPM file (thanks to Martin Wache). - Updated satellite names in 'sources.conf' (thanks to Thilo Wunderlich). - Adapted 'libsi' to DVB-S2 (thanks to Marco Schlüßler). - Fixed handling error status in cDvbTuner::GetFrontendStatus() (thanks to Reinhard Nissl). - Shutdown handling has been rewritten (thanks to Udo Richter). - Plugins can now implement the new function WakeupTime() to request VDR to wake up at a particular time (thanks to Udo Richter). - The HUP signal now forces a restart of VDR (thanks to Udo Richter). - cThread::EmergencyExit() has been replaced by ShutdownHandler.RequestEmergencyExit(). - Several references to "button" in a remote control context have been changed to "key" (based on a report from Marko Mäkelä regarding the "Menu button closes" text). The "MenuButtonCloses" parameter in 'setup.conf' has therefore been renamed to "MenuKeyCloses", accordingly. This will result in an "unknown config parameter: MenuButtonCloses" error message in the log file, so you may want to remove that entry from your 'setup.conf' file. - Simplified the error handling in cDvbTuner::GetFrontendStatus() (based on a discussion with Reinhard Nissl). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Increased the maximum number of DVB devices to 8 (thanks to Rolf Ahrenberg). - The new Setup parameter "Channel entry timeout" can be used to customize the time since the last keypress until a numerically entered channel number is considered complete, and the channel is switched (suggested by Helmut Auer). Setting this parameter to 0 turns off the automatic channel switching, and the user will have to confirm the entry by pressing the "Ok" key.	2007-02-25 18:00:00 +01:00
Klaus Schmidinger	66ab78a40f	Version 1.5.0 ... - The CAM handling has been refactored. Instead of a cCiHandler per device there is now an abstract cCiAdapter and a cCamSlot. This allows each slot to be accessed individually. - The general 15 seconds workaround time before opening the CAM menu has been removed. If the CAM menu doesn't open within a timeout, the enter menu command is now sent again. - If a CAM is reset or pulled and reinserted, it now automatically starts decrypting the current channel again. - The Setup/CAM menu now dynamically refreshes its items and displays whether a CAM is present or ready. The 'Reset' function no longer leaves the menu. - The CAM menu will now be openend when pressing the Ok key on a slot entry. - The CAM menu now stays within the current menu context and doesn't close and reopen the menu every time an option is selected. - When an encrypted channel is switched to for the first time, VDR now checks explicitly whether a CAM can actually decrypt that channel. If there is more than one CAM in the system that claims to be able to decrypt the channel, they are all tried in turn. To make this possible, an encrypted channel needs to be received in Transfer Mode when it is switched to for the first time, so that VDR can determine whether the TS packets are actually decrypted. Once a channel is known to be decrypted by a particular CAM, the next time it is switched to it will be shown in normal live viewing mode. - A cDevice now automatically detaches all cReceiver objects that receive PIDs that can't be decrypted with the current CAM. A plugin that attaches a cReceiver to a device should therefore watch the receiver's IsAttached() function to see if it is still attached to the device. - The cReceiver constructor no longer takes an 'int Ca' as its first parameter, but rather a 'tChannelID ChannelID'. This is necessary for the device to be able to determine which CAM a particular channel can be decrypted with. If the channel is known to be unencrypted, or a plugin doesn't want to provide the channel id for other reasons, an invalid tChannelID() can be given. - The cThread::Start() function now waits until a previous incarnation of this thread has actually stopped. Before this it could happen that a thread's Cancel(-1) function was called and immediately after that it was started again, but the Start() function still found it to be 'active'. - The parameter NeedsDetachReceivers in cDevice::GetDevice(const cChannel *Channel, ...) has been removed. A call to this function will automatically detach all receivers from the device if it returns a non-NULL pointer. - The cTimeMs class now accepts an initial timeout value in its constructor. - A CAM is now explicitly instructed to stop decrypting when switching away from an encrypted channel. - If the CAM in use can decrypt several channels at the same time, VDR can now make use if this capability. Whether or not a CAM can decrypt more than one channel is determined by sending it an initial empty QUERY command and testing whether it replies to it. - Ca values in the range 0...F in channels.conf can still be used to assign a channel to a particular device, but this will no longer work with encrypted channels because without valid CA ids VDR can't decide which CAM slot to use. However, since VDR now automatically determines which CAM can decrypt which channel, setting fixed channel/device relations should no longer be necessary. IF AN ENCRYPTED CHANNEL CAN'T BE DECRYPTED AND YOU HAVE A CA VALUE IN THE RANGE 0...F FOR THAT CHANNEL, SET IT TO 0 (FTA) AND TUNE TO THE CHANNEL AGAIN.	2007-01-07 18:00:00 +01:00
Klaus Schmidinger	0e310c57a4	Version 1.4.1-5 ... - Replaced the "quick workaround for additional live audio PIDs" in cDvbDevice::SetChannelDevice() with an actual solution in cDvbDevice::SetAudioTrackDevice() in order to prevent sticky PIDs in CAMs, which caused long switching times or completely blank screens when switching between encrypted channels on the same transponder (reported by Tomas Berglund). - Adapted cThread::ThreadId() to recent kernels (thanks to Ville Skyttä). - Added --remove-destination to the 'cp' command for binaries in the Makefile to avoid a crash in case a new version is installed on a running system (suggested by Petri Hintukainen). - Fixed handling "Ca Info" in case the CAM sends this again if the smart card is replaced with a different one.	2006-08-20 18:00:00 +02:00
Klaus Schmidinger	21f3eaf6c9	Version 1.4.0-3 ... - Fixed the PremiereContentTransmissionDescriptor in 'libsi' (thanks to Stefan Huelswitt). - Removed all the compatibility '#if APIVERSNUM...' stuff and instead increased the API version number - plugins will have to be recompiled. - Removed the call to pthread_setschedparam(childTid, SCHED_RR, 0) in thread.c, because it caused a compiler warning with post-2.4 glibc (reported by Ville Skyttä). Since the third parameter has to be non-null to have any effect, the call was presumably a NOP, anyway. - Fixed the 'clean-plugins' target in the Makefile to also remove additional plugin libraries (thanks to Wayne Keer). - Applied the fixes to moving and deleting channels from version 1.4.0-2 to the SVDRP commands MOVC and DELC as well. - Fixed handling the display of the '*' indicator in the "What's on now/next?" menu, so that events that haven't been "seen" in the data stream within 30 seconds won't be shown as "running". - Fixed handling tabbed item display in 'skincurses'. - Increased the column spacing in the "Recordings" menu (was too small for the 'skincurses' plugin). - When the 'skincurses' plugin is loaded, it automatically sets the 'curses' skin as the current one. This doesn't modify the Setup.OSDSkin parameter, so that after using 'skincurses' (for instance for debugging) the previously selected skin will be used again. - Added some log messages when setting the current skin. - Only making a second attempt to set the current skin at startup if the first attempt has failed. - Now switching to non-VPS timers' channels 60 seconds before the timer starts (if a free device is available), to allow for the updating of EPG data and CA descriptors before the actual recording starts.	2006-06-04 18:00:00 +02:00
Klaus Schmidinger	177b875945	Version 1.4.0-2 ... - Removed leftover LSMOD=... line from 'runvdr'. - Modified the Makefile to copy additional libraries a plugin might provide (suggested by Wayne Keer). See PLUGINS.html for details. - Fixed handling Transfer Mode when replaying Dolby Digital audio and the option '-a' was given (based on a patch from Werner Fink). To avoid having to increment the API version, several #if checks have been introduced around this. These will be removed once the API version actually needs to be incremented. - Fixed deleting the 'skinDescriptions' in cMenuSetupOSD::~cMenuSetupOSD() (thanks to Tobias Grimm). - Fixed calculating the start time of repeated timers with "first day" (thanks to Udo Richter). - Now setting a timer's cached start time to 0 after a call to Skip() (thanks to Udo Richter). - Fixed handling the running status of EPG events in case the "Schedule" menu is currently open (i.e. a write lock on the schedules data can't be achieved). - Fixed handling VPS timers in case the EPG event hasn't been 'seen' in a while. - Fixed calculating the cache size in cUnbufferedFile::Read() (thanks to Artur Skawina). - Removed -fPIC from VDR's and libsi's Makefile (suggested by Prakash Punnoor). - Modifed the device selection to better handle timer conflicts (reported by Christian Wieninger). - Avoiding a compiler warning in libsi's TypeLoop::operator[]. - Now processing the "frequency list descriptor" (based on a patch from Anssi Hannula). - Improved the repeat function for LIRC remote controls (thanks to Joerg Riechardt). - Fixed moving channels, which sometimes stopped the current replay session (reported by Mirko Dölle). - Fixed deleting channels in case the current channel's number changes (reported by Mirko Dölle).	2006-05-28 18:00:00 +02:00
Klaus Schmidinger	56e5836b54	Version 1.3.49 ... - Fixed initializing 'noapiv' in the Makefile (reported by Ronny Kornexl). - Fixed extracting APIVERSION to work with older versions of 'sed' (reported by Oliver Endriss; thanks also to Udo Richter for a shorter version of the 'sed' expression). - Fixed broken APIVERSION extraction line in 'newplugin' (thanks to Oliver Endriss). - Fixed entering '0' in a cMenuEditIntItem (reported by Mirko Dölle). - Updated the Italian OSD texts (thanks to Nino Gerbino). - Added a note about adding 'INCLUDES += -I$(DVBDIR)/include' to an existing Make.config (problem reported by Markus Ehrnsperger). - Fixed handling the cPluginManager::Active() result when pressing the "Power" key (reported by Werner Färber). - Added a hint about commenting out the line '#define USE_FADVISE' in tools.c in case of problems with replaying in fast forward mode if the video directory is mounted via a Samba share (reported by Andy Grobb). - Changed the "Really restart?" prompt in the call to cPluginManager::Active() in menu.c to "restart anyway?" (suggested by Rolf Ahrenberg). - Removed the obsolete "'1' for encrypted radio channels" part from the description of the VPID in vdr.5 (reported by Alexander Hans). - Fixed tuning to the channel of a VPS timer if the device is the actual device.	2006-04-28 18:00:00 +02:00
Klaus Schmidinger	880c3ddb94	Version 1.3.48 ... - Updated the GPL copies (thanks to Ville Skyttä). - Fixed several spelling errors (thanks to Ville Skyttä). - Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Updated the French OSD texts (thanks to Pierre Briec). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Fixed wrong credits for the patch that was used to implement cPlugin::Active(). - Simplified the 'grep|awk|sed' command to retrieve the VDR/APIVERSION to a single 'sed' call. - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Modified the German OSD texts to be "less technical" (thanks to Andreas Brachold). - Extended the version number reported with the '-V' option to also show the current APIVERSION (suggested by Thomas Günther). - Fixed handling empty titles in cEvent::FixEpgBugs() (reported by Rolf Ahrenberg). - Fixed some missing '-' in the German OSD texts (thanks to Walter Koch). - Added an error message about plugins that don't honor APIVERSION in their Makefile (based on a suggestion by Udo Richter). - Fixed a format string in recording.c to avoid a compiler warning on 64bit systems (thanks to Christian Wieninger for reporting, and Werner Schweer for pointing out that the 'z' modifier should be used here). - Ignoring k_Repeat when deciding whether the same key has been pressed in string input fields (based on a patch from Marko Mäkelä).	2006-04-23 18:00:00 +02:00
Klaus Schmidinger	293ed4027e	Version 1.3.47 ... - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed a crash when setting the time transponder in the Setup menu, caused by the new 'noneString' in cMenuEditChanItem (reported by Thomas Günther). - Added NULL checks to some strdup() calls in menuitems.c (suggested by Darren Salt). - Removed the unnecessary 'value' member from cMenuEditItem. - Fixed the initial setting of the time transponder setup parameter (reported by Thomas Günther). - Fixed unnecessary Set() calls in cMenuEditIntItem::ProcessKey(). - Allowing a tolerance for symbol rate values that are off by one (thanks to Richard Lithvall). - Added VBITeletextDescriptorTag, TeletextDescriptorTag, LocalTimeOffsetDescriptorTag and PremiereContentTransmissionDescriptor to 'libsi' (thanks to Marco Schlüßler). - Using geteuid() to check whether VDR is running as user 'root' (suggested by Tobias Grimm). - Added a missing "Key$" in skincurses.c (reported by Darren Salt). - Reintroduced the log message "deleting plugin: ..." when shutting down VDR (upon request by Ville Skyttä, as in the initial patch from Christoph Haubrich). - Fixed the vdr.1 man page (a single DVB card can record and do live tv). - The preferred audio language is now automatically selected when starting replay. - Updated the Danish OSD texts (thanks to Mogens Elneff). - The new function cPlugin::Active() can be used by a plugin to indicate that it is still busy and the system should not shut down or restart (based on a patch from Sascha Volkenandt). See PLUGINS.html for details. - Fixed setting the 'Delta' parameter when calling the shutdown script with no active timer (reported by Helge Lenz). - In order to make sure that plugins are compiled with the same DVB driver header files as VDR itself, the definition of DVBDIR has been removed from the VDR Makefile. If you are using a driver version that has its header files at a location other than /usr/include/linux/dvb, you can define DVBDIR in the Make.config file (see also INSTALL). Note that if you already have a Make.config file of your own, you should add the lines ifdef DVBDIR INCLUDES += -I$(DVBDIR)/include endif to its end, as in the new Make.config.template. Any reference to DVBDIR should be removed from all plugins' Makefiles, like this: ------------------------------------------------------------ --- PLUGINS/src/hello/Makefile 2005/11/11 13:20:14 1.10 +++ PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11 @@ -20,7 +20,6 @@ ### The directory environment: -DVBDIR = ../../../../DVB VDRDIR = ../../.. LIBDIR = ../../lib TMPDIR = /tmp @@ -40,7 +39,7 @@ ### Includes and Defines (add further entries here): -INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include +INCLUDES += -I$(VDRDIR)/include DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"' ------------------------------------------------------------ Thanks to Marco Schlüßler for pointing out this problem. - Implemented kNext and kPrev keys (based on a patch from Peter Juszack). See MANUAL for details. - Implemented kChanPrev (from a patch from Darren Salt). - The "Update channels" parameter in the "Setup/DVB" menu has been extended to allow updating only the PIDs (see MANUAL for details). When updating to this version of VDR, please verify that the setting is as you want it to be, because the values have been shifted. - The new APIVERSION (see config.h) now allows existing compiled plugins to be used with newer versions of VDR, as long as there have been no changes to the VDR header files since the last APIVERSION. Existing plugins' Makefiles should have all references to VDRVERSION changed to APIVERSION, like this: ------------------------------------------------------------ --- PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11 +++ PLUGINS/src/hello/Makefile 2006/04/16 09:03:50 1.12 @@ -28,9 +28,9 @@ -include $(VDRDIR)/Make.config -### The version number of VDR (taken from VDR's "config.h"): +### The version number of VDR's plugin API (taken from VDR's "config.h"): -VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g') +APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h) ### The name of the distribution archive: @@ -67,7 +67,7 @@ libvdr-$(PLUGIN).so: $(OBJS) $(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@ - @cp $@ $(LIBDIR)/$@.$(VDRVERSION) + @cp $@ $(LIBDIR)/$@.$(APIVERSION) dist: clean @-rm -rf $(TMPDIR)/$(ARCHIVE) ------------------------------------------------------------ - If a timer is newly created from within the "Schedule" menu, and its event is already running or has its start time within the next two minutes, it now goes directly into the "Edit timer" menu in order to allow the user to make further changes to timer parameters before the actual recording starts (inspired by Christian Wieninger's "epgsearch" plugin). - Added format check to syslog_with_tid(). - Updated the INSTALL file's section about non-VDR files in the video directory (since version 1.3.38 disk access is done in a separate thread, so the watchdog timer won't hit). - Changed the behaviour of the "Use small font" setup option to *always* use the small font if set to '2' - even if it would have been a fixed font (suggested by Ronny Kornexl). - No longer using characters 0x01 and 0x02 for mapping single quote and slash in recording names (thanks to Patrick Fischer for reporting that this was a problem with XML). The single quote is not mapped at all, and the slash is interchanged with the tilde. Existing recordings will be handled like before, so there is no need to actually rename them. - The cRemote::CallPlugin() function now has a boolean return value that tells the caller whether initiating the plugin call was successful (suggested by Reinhard Nissl). If it returns false, another plugin call is currently pending and the caller should try again later. This also means that the SVDRP command PLUG can now return an error code is the call fails. - The new function cPlugin::MainThreadHook() can be used by plugins to perform actions in the context of the main program thread. Use this function with great care and only of you absolutely have to! See also PLUGINS.html.	2006-04-17 18:00:00 +02:00
Klaus Schmidinger	c23992b807	Version 1.3.42 ... - Removed leftover 'needsBufferReserve' variable from cTransfer (thanks to Marco Schlüßler). - Fixed setting "No title" for broken event data (reported by Ronny Kornexl). - Fixed channel up/down switching on single card systems (reported by Stefan Huelswitt). - Fixed handling "pending" timers that blocked others that actually could record (reported by Thomas Koch). - Speeded up cVideoRepacker (thanks to Reinhard Nissl). - Added an 'Id' parameter to cDevice::PlayAudio() to allow plugins to easier process the audio data (thanks to Marco Schlüßler). - Added Czech language texts (thanks to Vladimír Bárta). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 21 different OSD languages, so please make sure you have 21 versions for each of your texts. - Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski). - Fixed auto advance in string entry fields when pressing Up/Down in insert mode (reported by Udo Richter). - Fixed handling the "Setup/OSD/Menu button closes" option when set to 'yes' in case a replay is active (thanks to Udo Richter). - Improved cUnbufferedFile; USE_FADVISE is now defined in tools.c by default, so if you don't want to use "fadvise" you need to comment out that line (thanks to Artur Skawina). - Fixed a missing ',' in the Swedish OSD texts (thanks to Arthur Konovalov). - cDevice::Transferring() can now be used to determine whether the (primary) device is currently playing in Transfer Mode (based on a suggestion by Reinhard Nissl). - The 'runvdr' script no longer uses the $VDRUSR environment variable to set the user id under which 'vdr' shall run. Just add the '-u username' option when you call 'runvdr'. - Fixed multiple entries of the same subdirectory in the "Recordings" menu (reported by Christian Jacobsen). - Enabled generating a core dump if VDR is run with a different user id (thanks to Ville Skyttä). - Fixed handling the "Blue" key in the "Schedule" menu for the current channel (thanks to Rolf Ahrenberg). - Renamed the Makefile target 'plugins-clean' to 'clean-plugins' (suggested by Sebastian Frei). - Made all font and image data 'const' (thanks to Darren Salt). - Fixed scrolling with Up/Down in case there are non-selectable items at the beginning or end of the menu (reported by Helmut Auer). - Added cSkin::GetTextAreaWidth() and cSkin::GetTextAreaFont(), so that a plugin that wants to do special text formatting can do so (thanks to Alexander Rieger).	2006-02-05 18:00:00 +01:00
Klaus Schmidinger	c37734080c	Version 1.3.41 ... - EPG events from epg.data or SVDRP's PUTE command now have their Title set to "No Title" if none was set. - Fixed checking toFile in cCuttingThread::Action() (found in a larger patch from Artur Skawina). - Fixed a crash when pressing '0' in the "Schedule" menu on a channel that doesn't have any EPG data (reported ny Alexander Hans). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Fixed a missing ',' in the Greek OSD texts (thanks to Arthur Konovalov). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed handling the tfRecording flag when reading timers (bug reported by Andreas Mair). - Now checking whether the channel exists before setting the PMT filter in cPatFilter::Process() (thanks to Thomas Bergwinkl). - Now trying to reestablish the connection to the LIRC daemon in case it breaks (thanks to Ville Skyttä). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed channel switching with the Down (Up) key in case the current channel is already the first (last) in the list (reported by Frank Krömmelbein). - Removed the "buffer reserve" in Transfer Mode - it's no longer necessary with recent driver/firmware versions. - The epg.data file is now written when VDR exits (suggested by Daniel Karsubka). - Fixed cTimers::GetNextActiveTimer() so that it won't return an expired timer (reported by Rolf Ahrenberg). - Changed DVBS_TUNE_TIMEOUT and DVBC_TUNE_TIMEOUT to 9000ms to avoid problems with channels that have low symbol rates (reported by Suur Karu). - Fixed displaying the current audio track in the channel display. - When reading epg.data (or data from PUTE), the version number of events with table IDs smaller than 0x50 is now ignored because otherwise the current running status would not be set after a restart of VDR. - Implemented a timeout for remote controls that don't deliver "repeat" keypresses very fast (based on a suggestion by Luca Olivetti; problem with the new handling of k_Repeat keypresses in channel switching reported by Udo Richter). - When looking for the present or following EPG event, the running status is now always taken into account. - Now initializing the channels' schedule pointers when reading the epg.data file, so that the first WhatsOn menu will come up faster. - If a shutdown is requested, but the shutdown script doesn't actually halt the system, it is now tried again after 5 minutes (suggested by Helmut Auer). - Separated the 'install' target into several individual targets; renamed the 'plugins-install' target to 'install-plugins' (thanks to Helmut Auer).	2006-01-29 18:00:00 +01:00
Klaus Schmidinger	78e3da813c	Version 1.3.39 ... - The SVDRP command LSTT now accepts the new option 'id' to have the channels of the timers listed with their unique channel ids instead of their numbers (suggested by Matthias Schniedermeyer). - Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä). - Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks to Andreas Brachold). - Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence() (thanks to Peter Bieringer). If you are using the PC keyboard as remote control input you may need to make VDR newly learn the keys by removing the remote.conf file. - To avoid problems with access rights when VDR shall run as 'root' it now skips all SetCaps() and SetUser() calls when it is started as 'root' and "-u root" is given. - Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä) - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Making the "Menu" key behave consistently has not been well received by several users, so the new option "Setup/OSD/Menu button closes" can be used to get the old behavior back (which also is the default value of this option). - Dropped the default vdr user. The program now always runs under the user id it was started from, unless the '-u' option is given and it was started from the 'root' user. If you want to have a default vdr user, you can activate and adjust the "VDR_USER = vdr" line in your Make.config file (from the original patch by Ludwig Nussel). - Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle). - Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism introduced in version 1.3.32. - Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä). - Added missing description of L and R circular polarization to 'diseqc.conf'. - Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko). - Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path names (thanks to Stefan Huelswitt). - Added a missing '-' to the example for viewing a grabbed image on a remote host (reported by Philippe Gramoullé). - Made the "What's on now/next?" menus a lot faster by storing a pointer to each channel's schedule in the cChannel data. - Made the log messages regarding lost lock of devices "info" instead of "error" (suggested by Andreas Brachold). - The SVDRP command GRAB allows file names without extension again (suggested by Stefan Huelswitt). - Pressing '0' in the "Schedule" menu now rotates through displaying "This event on this channel", "This event on all channels" and "All events on all channels". This can be used to find reruns of a given show, or the episodes of a series. Note that if there are many channels in your channels.conf, displaying the "All events on all channels" page may take a while. - The status markers in the "Schedule" menu are now only updated if a submenu is closed in which a timer has been modified, which speeds up closing submenus. - Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording if Setup.UseDolbyDigital is true (suggested by André Weidemann). - Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf Ahrenberg). - No longer displaying color buttons in the recording info menu if it has been invoked from a player (reported by Jürgen Schilling).	2006-01-15 18:00:00 +01:00