hyperion.ng/libsrc/leddevice/LedDeviceFactory.cpp

382 lines
12 KiB
C++
Raw Normal View History

// Stl includes
#include <string>
#include <algorithm>
// Build configuration
#include <HyperionConfig.h>
// Leddevice includes
#include <leddevice/LedDeviceFactory.h>
// Local Leddevice includes
#ifdef ENABLE_SPIDEV
#include "LedDeviceLpd6803.h"
#include "LedDeviceLpd8806.h"
#include "LedDeviceP9813.h"
#include "LedDeviceWs2801.h"
#include "LedDeviceWs2812SPI.h"
#include "LedDeviceAPA102.h"
#endif
#ifdef ENABLE_TINKERFORGE
#include "LedDeviceTinkerforge.h"
#endif
#include "LedDeviceAdalight.h"
#include "LedDeviceAmbiLed.h"
#include "LedDeviceRawHID.h"
#include "LedDeviceLightpack.h"
#include "LedDeviceMultiLightpack.h"
#include "LedDevicePaintpack.h"
#include "LedDevicePiBlaster.h"
#include "LedDeviceSedu.h"
#include "LedDeviceFile.h"
#include "LedDeviceFadeCandy.h"
#include "LedDeviceUdp.h"
#include "LedDeviceUdpRaw.h"
#include "LedDeviceHyperionUsbasp.h"
#include "LedDevicePhilipsHue.h"
#include "LedDeviceTpm2.h"
#include "LedDeviceAtmo.h"
#include "LedDeviceAdalightApa102.h"
#include "LedDeviceAtmoOrb.h"
#ifdef ENABLE_WS2812BPWM
#include "LedDeviceWS2812b.h"
#endif
#ifdef ENABLE_WS281XPWM
#include "LedDeviceWS281x.h"
#endif
LedDevice * LedDeviceFactory::construct(const Json::Value & deviceConfig)
{
std::cout << "LEDDEVICE INFO: configuration: " << deviceConfig << std::endl;
std::string type = deviceConfig.get("type", "UNSPECIFIED").asString();
std::transform(type.begin(), type.end(), type.begin(), ::tolower);
LedDevice* device = nullptr;
if (false) {}
else if (type == "adalight")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
const int delay_ms = deviceConfig["delayAfterConnect"].asInt();
LedDeviceAdalight* deviceAdalight = new LedDeviceAdalight(output, rate, delay_ms);
deviceAdalight->open();
device = deviceAdalight;
}
else if (type == "adalightapa102")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
const int delay_ms = deviceConfig["delayAfterConnect"].asInt();
LedDeviceAdalightApa102* deviceAdalightApa102 = new LedDeviceAdalightApa102(output, rate, delay_ms);
deviceAdalightApa102->open();
device = deviceAdalightApa102;
}
else if (type == "ambiled")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
const int delay_ms = deviceConfig["delayAfterConnect"].asInt();
LedDeviceAmbiLed* deviceAmbiLed = new LedDeviceAmbiLed(output, rate, delay_ms);
deviceAmbiLed->open();
device = deviceAmbiLed;
}
#ifdef ENABLE_SPIDEV
else if (type == "lpd6803" || type == "ldp6803")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
LedDeviceLpd6803* deviceLdp6803 = new LedDeviceLpd6803(output, rate);
deviceLdp6803->open();
device = deviceLdp6803;
}
else if (type == "lpd8806" || type == "ldp8806")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
LedDeviceLpd8806* deviceLpd8806 = new LedDeviceLpd8806(output, rate);
deviceLpd8806->open();
device = deviceLpd8806;
}
else if (type == "p9813")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
LedDeviceP9813* deviceP9813 = new LedDeviceP9813(output, rate);
deviceP9813->open();
device = deviceP9813;
}
else if (type == "apa102")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
Apa102 fix if the led strip has more physical LEDs than you want to configure with hyperion (#626) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * started bug fixes for APA strips with more physical leds than configured * 1st cut of changes to APA102. now looks at config for "leds" which is the # of hardware leds in the strip. This enables us to write the correct trailer length in the packet. Also fixed a bug where switchoff was writing the wrong # of leds * removed commented out old code removed debug printf * included prebuild test binary for Pi2 * Second attempt at the fix. BEFORE: If you have more physcial LEDs than defined in the "leds" "index" section of the config there is random junk added to the end of the strip. WITH THIS FIX: In the "device" section specify the number of physical leds with: "leds" : 212, If this is greater than the number of led indexes, additional LEDs are set to black If this is smaller than the number of led indexes, it is ignored * included test binary * Clean exit if the device config is missing or a non-supported device type is specified Former-commit-id: 8ae96188fa74d91b13a921e7d5faf6d6ac1c42ee
2016-05-10 12:16:19 +02:00
const unsigned ledcount = deviceConfig.get("leds",0).asInt();
Apa102 fix if the led strip has more physical LEDs than you want to configure with hyperion (#626) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * started bug fixes for APA strips with more physical leds than configured * 1st cut of changes to APA102. now looks at config for "leds" which is the # of hardware leds in the strip. This enables us to write the correct trailer length in the packet. Also fixed a bug where switchoff was writing the wrong # of leds * removed commented out old code removed debug printf * included prebuild test binary for Pi2 * Second attempt at the fix. BEFORE: If you have more physcial LEDs than defined in the "leds" "index" section of the config there is random junk added to the end of the strip. WITH THIS FIX: In the "device" section specify the number of physical leds with: "leds" : 212, If this is greater than the number of led indexes, additional LEDs are set to black If this is smaller than the number of led indexes, it is ignored * included test binary * Clean exit if the device config is missing or a non-supported device type is specified Former-commit-id: 8ae96188fa74d91b13a921e7d5faf6d6ac1c42ee
2016-05-10 12:16:19 +02:00
LedDeviceAPA102* deviceAPA102 = new LedDeviceAPA102(output, rate, ledcount);
deviceAPA102->open();
device = deviceAPA102;
}
else if (type == "ws2801" || type == "lightberry")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
const unsigned latchtime = deviceConfig.get("latchtime",500000).asInt();
LedDeviceWs2801* deviceWs2801 = new LedDeviceWs2801(output, rate, latchtime);
deviceWs2801->open();
device = deviceWs2801;
}
else if (type == "ws2812spi")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig.get("rate",2857143).asInt();
LedDeviceWs2812SPI* deviceWs2812SPI = new LedDeviceWs2812SPI(output, rate);
deviceWs2812SPI->open();
device = deviceWs2812SPI;
}
#endif
#ifdef ENABLE_TINKERFORGE
else if (type=="tinkerforge")
{
const std::string host = deviceConfig.get("output", "127.0.0.1").asString();
const uint16_t port = deviceConfig.get("port", 4223).asInt();
const std::string uid = deviceConfig["uid"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
LedDeviceTinkerforge* deviceTinkerforge = new LedDeviceTinkerforge(host, port, uid, rate);
deviceTinkerforge->open();
device = deviceTinkerforge;
}
#endif
else if (type == "rawhid")
{
const int delay_ms = deviceConfig["delayAfterConnect"].asInt();
auto VendorIdString = deviceConfig.get("VID", "0x2341").asString();
auto ProductIdString = deviceConfig.get("PID", "0x8036").asString();
// Convert HEX values to integer
auto VendorId = std::stoul(VendorIdString, nullptr, 16);
auto ProductId = std::stoul(ProductIdString, nullptr, 16);
LedDeviceRawHID* deviceHID = new LedDeviceRawHID(VendorId, ProductId, delay_ms);
deviceHID->open();
device = deviceHID;
}
else if (type == "lightpack")
{
const std::string output = deviceConfig.get("output", "").asString();
LedDeviceLightpack* deviceLightpack = new LedDeviceLightpack();
deviceLightpack->open(output);
device = deviceLightpack;
}
else if (type == "multi-lightpack")
{
LedDeviceMultiLightpack* deviceLightpack = new LedDeviceMultiLightpack();
deviceLightpack->open();
device = deviceLightpack;
}
else if (type == "paintpack")
{
const int delay_ms = deviceConfig["delayAfterConnect"].asInt();
auto VendorIdString = deviceConfig.get("VID", "0x0EBF").asString();
auto ProductIdString = deviceConfig.get("PID", "0x0025").asString();
// Convert HEX values to integer
auto VendorId = std::stoul(VendorIdString, nullptr, 16);
auto ProductId = std::stoul(ProductIdString, nullptr, 16);
LedDevicePaintpack * devicePainLightpack = new LedDevicePaintpack(VendorId, ProductId, delay_ms);
devicePainLightpack->open();
device = devicePainLightpack;
}
else if (type == "piblaster")
{
const std::string output = deviceConfig.get("output", "").asString();
const std::string assignment = deviceConfig.get("assignment", "").asString();
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
const Json::Value gpioMapping = deviceConfig.get("gpiomap", Json::nullValue);
if (assignment.length() > 0) {
std::cout << "ERROR: Sorry, the configuration syntax has changed in this version." << std::endl;
exit(EXIT_FAILURE);
}
if (! gpioMapping.isNull() ) {
LedDevicePiBlaster * devicePiBlaster = new LedDevicePiBlaster(output, gpioMapping);
devicePiBlaster->open();
device = devicePiBlaster;
} else {
std::cout << "ERROR: no gpiomap defined." << std::endl;
exit(EXIT_FAILURE);
}
}
else if (type == "sedu")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
LedDeviceSedu* deviceSedu = new LedDeviceSedu(output, rate);
deviceSedu->open();
device = deviceSedu;
}
else if (type == "hyperion-usbasp-ws2801")
{
LedDeviceHyperionUsbasp * deviceHyperionUsbasp = new LedDeviceHyperionUsbasp(LedDeviceHyperionUsbasp::CMD_WRITE_WS2801);
deviceHyperionUsbasp->open();
device = deviceHyperionUsbasp;
}
else if (type == "hyperion-usbasp-ws2812")
{
LedDeviceHyperionUsbasp * deviceHyperionUsbasp = new LedDeviceHyperionUsbasp(LedDeviceHyperionUsbasp::CMD_WRITE_WS2812);
deviceHyperionUsbasp->open();
device = deviceHyperionUsbasp;
}
else if (type == "philipshue")
{
const std::string output = deviceConfig["output"].asString();
const std::string username = deviceConfig.get("username", "newdeveloper").asString();
const bool switchOffOnBlack = deviceConfig.get("switchOffOnBlack", true).asBool();
const int transitiontime = deviceConfig.get("transitiontime", 1).asInt();
std::vector<unsigned int> lightIds;
for (Json::Value::ArrayIndex i = 0; i < deviceConfig["lightIds"].size(); i++) {
lightIds.push_back(deviceConfig["lightIds"][i].asInt());
}
device = new LedDevicePhilipsHue(output, username, switchOffOnBlack, transitiontime, lightIds);
}
else if (type == "atmoorb")
{
const std::string output = deviceConfig["output"].asString();
const bool useOrbSmoothing = deviceConfig.get("useOrbSmoothing", false).asBool();
const int transitiontime = deviceConfig.get("transitiontime", 1).asInt();
const int skipSmoothingDiff = deviceConfig.get("skipSmoothingDiff", 0).asInt();
const int port = deviceConfig.get("port", 1).asInt();
const int numLeds = deviceConfig.get("numLeds", 1).asInt();
const std::string orbId = deviceConfig["orbIds"].asString();
std::vector<unsigned int> orbIds;
// If we find multiple Orb ids separate them and add to list
const std::string separator (",");
if (orbId.find(separator) != std::string::npos) {
std::stringstream ss(orbId);
std::vector<int> output;
unsigned int i;
while (ss >> i) {
orbIds.push_back(i);
if (ss.peek() == ',' || ss.peek() == ' ')
ss.ignore();
}
}
else
{
orbIds.push_back(atoi(orbId.c_str()));
}
device = new LedDeviceAtmoOrb(output, useOrbSmoothing, transitiontime, skipSmoothingDiff, port, numLeds, orbIds);
}
else if (type == "file")
{
const std::string output = deviceConfig.get("output", "/dev/null").asString();
device = new LedDeviceFile(output);
}
else if (type == "fadecandy")
{
const std::string host = deviceConfig.get("output", "127.0.0.1").asString();
const uint16_t port = deviceConfig.get("port", 7890).asInt();
const uint16_t channel = deviceConfig.get("channel", 0).asInt();
device = new LedDeviceFadeCandy(host, port, channel);
}
else if (type == "udp")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
const unsigned protocol = deviceConfig["protocol"].asInt();
const unsigned maxPacket = deviceConfig["maxpacket"].asInt();
device = new LedDeviceUdp(output, rate, protocol, maxPacket);
}
else if (type == "udpraw")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
const unsigned latchtime = deviceConfig.get("latchtime",500000).asInt();
LedDeviceUdpRaw* deviceUdpRaw = new LedDeviceUdpRaw(output, rate, latchtime);
deviceUdpRaw->open();
device = deviceUdpRaw;
}
else if (type == "tpm2")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = deviceConfig["rate"].asInt();
LedDeviceTpm2 * deviceTpm2 = new LedDeviceTpm2(output, rate);
deviceTpm2->open();
device = deviceTpm2;
}
else if (type == "atmo")
{
const std::string output = deviceConfig["output"].asString();
const unsigned rate = 38400;
LedDeviceAtmo * deviceAtmo = new LedDeviceAtmo(output, rate);
deviceAtmo->open();
device = deviceAtmo;
}
#ifdef ENABLE_WS2812BPWM
else if (type == "ws2812b")
{
LedDeviceWS2812b * ledDeviceWS2812b = new LedDeviceWS2812b();
device = ledDeviceWS2812b;
}
#endif
#ifdef ENABLE_WS281XPWM
else if (type == "ws281x")
{
const int gpio = deviceConfig.get("gpio", 18).asInt();
const int leds = deviceConfig.get("leds", 256).asInt();
const uint32_t freq = deviceConfig.get("freq", (Json::UInt)800000ul).asInt();
const int dmanum = deviceConfig.get("dmanum", 5).asInt();
const int pwmchannel = deviceConfig.get("pwmchannel", 0).asInt();
const int invert = deviceConfig.get("invert", 0).asInt();
const int rgbw = deviceConfig.get("rgbw", 0).asInt();
const std::string& whiteAlgorithm = deviceConfig.get("white_algorithm","").asString();
LedDeviceWS281x * ledDeviceWS281x = new LedDeviceWS281x(gpio, leds, freq, dmanum, pwmchannel, invert,
rgbw, whiteAlgorithm);
device = ledDeviceWS281x;
}
#endif
else
{
std::cout << "LEDDEVICE ERROR: Unknown/Unimplemented device " << type << std::endl;
// Unknown / Unimplemented device
Apa102 fix if the led strip has more physical LEDs than you want to configure with hyperion (#626) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * started bug fixes for APA strips with more physical leds than configured * 1st cut of changes to APA102. now looks at config for "leds" which is the # of hardware leds in the strip. This enables us to write the correct trailer length in the packet. Also fixed a bug where switchoff was writing the wrong # of leds * removed commented out old code removed debug printf * included prebuild test binary for Pi2 * Second attempt at the fix. BEFORE: If you have more physcial LEDs than defined in the "leds" "index" section of the config there is random junk added to the end of the strip. WITH THIS FIX: In the "device" section specify the number of physical leds with: "leds" : 212, If this is greater than the number of led indexes, additional LEDs are set to black If this is smaller than the number of led indexes, it is ignored * included test binary * Clean exit if the device config is missing or a non-supported device type is specified Former-commit-id: 8ae96188fa74d91b13a921e7d5faf6d6ac1c42ee
2016-05-10 12:16:19 +02:00
exit(1);
}
return device;
}