1
0
mirror of https://github.com/rofafor/vdr-plugin-femon.git synced 2023-10-10 11:36:53 +00:00

Compare commits

..

29 Commits

Author SHA1 Message Date
Rolf Ahrenberg
74a2a1bbe7 Updated for vdr-1.4.0.
Modified APIVERSION code in Makefile.
Updated german translation (Thanks to Andreas Brachold).
2006-04-30 04:20:00 +03:00
Rolf Ahrenberg
bf85e32d0d Added STRIP option for Makefile (Thanks to Ville Skyttä).
Modified APIVERSION code in Makefile.
2006-04-23 04:20:00 +03:00
Rolf Ahrenberg
caf42f7ace Updated for vdr-1.3.47. 2006-04-20 04:20:00 +03:00
Rolf Ahrenberg
c2b1e5a187 Updated for vdr-1.3.44.
Minor Makefile changes.
Made all symbol data 'const'.
Added spanish translation (Thanks to Luis Palacios).
2006-03-08 04:20:00 +02:00
Rolf Ahrenberg
e90fe6065c Updated for vdr-1.3.42.
Added "SilverGreen" theme (Thanks to Rififi77 @ VDRPortal).
2006-02-06 04:20:00 +02:00
Rolf Ahrenberg
7ee255830a Updated for vdr-1.3.40.
Fixed a translation bug (Thanks to Antti Hartikainen).
Fixed AC3 header parsing bug (Thanks to Axel Katzur for reporting this one).
Fixed EgalsTry theme (Thanks to Uwe Hanke).
2006-01-25 04:20:00 +02:00
Rolf Ahrenberg
7da8cb2110 Updated for vdr-1.3.36.
Added french translation (Thanks to Nicolas Huillard).
Enabled bitrate commands via SVDRP.
Added new SVDRP commands.
Modified femon service without incrementing version number.
Added "Duotone" theme for 2bpp on screen displays.
Fixed crash bug in femonreceiver.
Fixed setup page bug (Thanks to Thomas Günther for reporting this one).
2005-11-13 04:20:00 +02:00
Rolf Ahrenberg
e2fb9e994a Updated for vdr-1.3.34.
Added Enigma theme (Thanks to Rolf Hoverath).
Added EgalsTry theme (Thanks to Uwe Hanke).
Added option to disable rounded corners.
2005-10-04 04:20:00 +03:00
Rolf Ahrenberg
37957be99f Updated for vdr-1.3.31.
Added preliminary svdrp and service support.
2005-08-28 04:20:00 +03:00
Rolf Ahrenberg
713f9e652a Threads updated for vdr-1.3.29. 2005-08-15 04:20:00 +03:00
Rolf Ahrenberg
7c948cde72 Fixed AC3-info flickering (Thanks to Pasi Juppo for reporting this one).
Added "Analog" type CA system.
Plugin is now stripped by default.
2005-07-23 04:20:00 +03:00
Rolf Ahrenberg
8e57eec535 Renamed compiling switches ('DEBUG' to 'FEMON_DEBUG' and 'NTSC_SYSTEM' to 'FEMON_NTSC').
Enabled preliminary support for the device switching.
2005-05-20 04:20:00 +03:00
Rolf Ahrenberg
0f111eb660 Updated Estonian translations (Thanks to Arthur Konovalov).
Added the missing german translations (Thanks to #vdr-portal).
2005-04-04 04:20:00 +03:00
Rolf Ahrenberg
6670f85a20 Cleaned up finnish translations (Thanks to Ville Skyttä). 2005-04-02 04:20:00 +03:00
Rolf Ahrenberg
9814970182 Default make target is now all.
Fixed the access rights of symbols subdirectory (Thanks to Harri Kukkonen).
Added a new theme: Moronimo (Thanks to Morone).
2005-04-01 04:20:00 +03:00
Rolf Ahrenberg
5bda0fa833 Horizontal offset setup option should be functional now. 2005-02-26 04:20:00 +02:00
Rolf Ahrenberg
ca954757db Updated for vdr-1.3.21.
Minor modification for DEBUG mode.
Added preliminary support for themes and some GUI tweaks.
Added horizontal offset setup option.
2005-02-24 04:20:00 +02:00
Rolf Ahrenberg
825755281f Added Estonian translations (Thanks to Arthur Konovalov). 2005-01-24 04:20:00 +02:00
Rolf Ahrenberg
ab3f270eed Updated for vdr-1.3.19. 2005-01-23 04:20:00 +02:00
Rolf Ahrenberg
995b2567e5 Some minor cosmetic fixes. 2005-01-23 04:20:00 +02:00
Rolf Ahrenberg
6f9961f499 Updated for vdr-1.3.18.
Added DEBUG mode (make DEBUG=1 plugins).
OSD height is now user configurable.
Added audio channel selection into Yellow key.
2005-01-15 04:20:00 +02:00
Rolf Ahrenberg
c454189adf Updated for vdr-1.3.17.
Fixed receiver related crash (Thanks to Marco Schluessler).
2004-11-28 04:20:00 +02:00
Rolf Ahrenberg
5339f71b33 Yet Another Minor Release.
Integrated the CA system names patch: "Setup / Show CA System".
2004-09-11 04:20:00 +03:00
Rolf Ahrenberg
8e53fa8521 Fixed OSDSTATUSWIN_XC define.
Added preliminary NTSC support (make NTSC_SYSTEM=1 plugins).
Fixed "Setup/OSD/Use Small Fonts" bug (Thanks to Winni for reporting this one).
Added patches directory: CA system names by Lauri Tischler.
2004-08-18 04:20:00 +03:00
Rolf Ahrenberg
9514ed5387 Added some new symbols and beautified the old ones.
Added audio track selection feature.
Added preliminary device switching feature (disabled at the moment).
2004-06-24 04:20:00 +03:00
Rolf Ahrenberg
a6039cdd66 Added "AC-3 Stream Information" display mode (Thanks to Lothar Englisch). 2004-06-11 04:20:00 +03:00
Rolf Ahrenberg
848a2ba78d Fixed the channel switch bug (reported by Stefan Lucke).
Nid/Tid/Rid are now included in translations.
Added video format and aspect ratio symbols into status window.
2004-06-06 04:20:00 +03:00
Rolf Ahrenberg
74ed4d8490 Added "Stream Information" display mode.
Toggle between different modes with 'OK' key:
 .-> basic -> transponder -> stream -.
 `-----------------------------------´
Added missing german translations (Thanks to Peter Marquardt).
2004-05-30 04:20:00 +03:00
Rolf Ahrenberg
8c7c110cf2 Updated for vdr-1.3.7 and removed compability with older versions. 2004-05-18 04:20:00 +03:00
45 changed files with 3412 additions and 946 deletions

122
HISTORY
View File

@@ -106,3 +106,125 @@ VDR Plugin 'femon' Revision History
- Yet Another Minor Release.
- Integrated the CA system names patch: "Setup / Show CA System".
2004-11-28: Version 0.1.7
- Updated for vdr-1.3.17.
- Fixed receiver related crash (Thanks to Marco Schluessler).
2005-01-15: Version 0.7.7
- Updated for vdr-1.3.18.
- Added DEBUG mode (make DEBUG=1 plugins).
- OSD height is now user configurable.
- Added audio channel selection into Yellow key.
2005-01-23: Version 0.7.9
- Some minor cosmetic fixes.
2005-01-23: Version 0.8.0
- Updated for vdr-1.3.19.
2005-01-24: Version 0.8.1
- Added Estonian translations (Thanks to Arthur Konovalov).
2005-02-24: Version 0.8.5
- Updated for vdr-1.3.21.
- Minor modification for DEBUG mode.
- Added preliminary support for themes and some GUI tweaks.
- Added horizontal offset setup option.
2005-02-26: Version 0.8.6
- Horizontal offset setup option should be functional now.
2005-04-01: Version 0.8.7
- Default make target is now all.
- Fixed the access rights of symbols subdirectory (Thanks to Harri Kukkonen).
- Added a new theme: Moronimo (Thanks to Morone).
2005-04-02: Version 0.8.8
- Cleaned up finnish translations (Thanks to Ville Skytt<74>).
2005-04-04: Version 0.8.9
- Updated Estonian translations (Thanks to Arthur Konovalov).
- Added the missing german translations (Thanks to #vdr-portal).
2005-05-20: Version 0.9.0
- Renamed compiling switches ('DEBUG' to 'FEMON_DEBUG' and 'NTSC_SYSTEM' to 'FEMON_NTSC').
- Enabled preliminary support for the device switching.
2005-07-23: Version 0.9.1
- Fixed AC3-info flickering (Thanks to Pasi Juppo for reporting this one).
- Added "Analog" type CA system.
- Plugin is now stripped by default.
2005-08-15: Version 0.9.2
- Threads updated for vdr-1.3.29.
2005-08-28: Version 0.9.3
- Updated for vdr-1.3.31.
- Added preliminary svdrp and service support.
2005-10-04: Version 0.9.4
- Updated for vdr-1.3.34.
- Added Enigma theme (Thanks to Rolf Hoverath).
- Added EgalsTry theme (Thanks to Uwe Hanke).
- Added option to disable rounded corners.
2005-11-13: Version 0.9.5
- Updated for vdr-1.3.36.
- Added french translation (Thanks to Nicolas Huillard).
- Enabled bitrate commands via SVDRP.
- Added new SVDRP commands.
- Modified femon service without incrementing version number.
- Added "Duotone" theme for 2bpp on screen displays.
- Fixed crash bug in femonreceiver.
- Fixed setup page bug (Thanks to Thomas G<>nther for reporting this one).
2006-01-25: Version 0.9.6
- Updated for vdr-1.3.40.
- Fixed a translation bug (Thanks to Antti Hartikainen).
- Fixed AC3 header parsing bug (Thanks to Axel Katzur for reporting this one).
- Fixed EgalsTry theme (Thanks to Uwe Hanke).
2006-02-06: Version 0.9.7
- Updated for vdr-1.3.42.
- Added "SilverGreen" theme (Thanks to Rififi77 @ VDRPortal).
2006-03-08: Version 0.9.8
- Updated for vdr-1.3.44.
- Minor Makefile changes.
- Made all symbol data 'const'.
- Added spanish translation (Thanks to Luis Palacios).
2006-04-20: Version 0.9.9
- Updated for vdr-1.3.47.
2006-04-23: Version 0.9.10
- Added STRIP option for Makefile (Thanks to Ville Skytt<74>).
- Modified APIVERSION code in Makefile.
2006-04-30: Version 1.0.0
- Updated for vdr-1.4.0.
- Modified APIVERSION code in Makefile.
- Updated german translation (Thanks to Andreas Brachold).

View File

@@ -3,6 +3,15 @@
#
# $Id$
# Debugging on/off
#FEMON_DEBUG = 1
# NTSC on/off
#FEMON_NTSC = 1
# Strip debug symbols? Set eg. to /bin/true if not
STRIP = strip
# The official name of this plugin.
# This name will be used in the '-P...' option of VDR to load the plugin.
# By default the main source file also carries this name.
@@ -11,16 +20,15 @@ PLUGIN = femon
### The version number of this plugin (taken from the main source file):
VERSION = $(shell grep 'static const char \*VERSION *=' $(PLUGIN).h | awk '{ print $$6 }' | sed -e 's/[";]//g')
VERSION = $(shell grep 'static const char VERSION\[\] *=' $(PLUGIN).h | awk '{ print $$6 }' | sed -e 's/[";]//g')
### The C++ compiler and options:
CXX ?= g++
CXXFLAGS ?= -O2 -Wall -Woverloaded-virtual
CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual
### The directory environment:
DVBDIR = ../../../../DVB
VDRDIR = ../../..
LIBDIR = ../../lib
TMPDIR = /tmp
@@ -29,9 +37,9 @@ TMPDIR = /tmp
-include $(VDRDIR)/Make.config
### The version number of VDR (taken from VDR's "config.h"):
### The version number of VDR's plugin API (taken from VDR's "config.h"):
VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g')
APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h)
### The name of the distribution archive:
@@ -40,17 +48,24 @@ PACKAGE = vdr-$(ARCHIVE)
### Includes and Defines (add further entries here):
INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include
INCLUDES += -I$(VDRDIR)/include
DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
ifdef NTSC_SYSTEM
DEFINES += -DNTSC_SYSTEM
ifdef FEMON_NTSC
DEFINES += -DNTSC
endif
ifdef FEMON_DEBUG
DEFINES += -DDEBUG
endif
.PHONY: all all-redirect
all-redirect: all
### The object files (add further files here):
OBJS = femon.o femonosd.o femonreceiver.o femoncfg.o femoni18n.o
OBJS = femon.o femonosd.o femonreceiver.o femoncfg.o femoni18n.o femontools.o
### Implicit rules:
@@ -72,7 +87,10 @@ all: libvdr-$(PLUGIN).so
libvdr-$(PLUGIN).so: $(OBJS)
$(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@
@cp $@ $(LIBDIR)/$@.$(VDRVERSION)
ifndef FEMON_DEBUG
@$(STRIP) $@
endif
@cp $@ $(LIBDIR)/$@.$(APIVERSION)
dist: clean
@-rm -rf $(TMPDIR)/$(ARCHIVE)

35
README
View File

@@ -21,16 +21,14 @@ transponder and stream information are also available in advanced display modes.
The plugin is based on a neat console frontend status monitor application
called 'femon' by Johannes Stezenbach (see DVB-apps/szap/femon.c for further
information). The other parts of plugin code are borrowed from the excellent
'OSD Picture-In-Picture' plugin by Sascha Volkenandt and Andreas Regel. The
bitrate calculation algorithm originates from the 'dvbstream' application by
Dave Chapman and the stream information routines from the 'libdvb' library by
Metzler Brothers.
information). The bitrate calculation trick originates from the 'dvbstream'
application by Dave Chapman and the stream information routines are taken from
the 'libdvb' library by Metzler Brothers.
Terminology:
--------------------------------------------------------------
|## Channel Name ######################### [DD][AR][VF][A][D]|
|## Channel Name ########################## [AR][VF][A/DD][D]|
|[=====Signal Strength in % ==============|=================]|
|[=====Signal-to-Noise Ratio in % ========|=================]|
| STR: #0000 (0%) BER: #00000000 Video: 0 Mbit/s |
@@ -51,10 +49,9 @@ CARRIER - Found a DVB signal
VITERBI - FEC (forward error correction) is stable
SYNC - Found sync bytes
DD - AC-3 stream (optional)
AR - Aspect Ratio: 1:1/4:3/16:9/2.21:1 (optional)
VF - Video format: PAL/NTSC (optional)
A - Audio track: 1..2 (optional)
A/DD - Audio (0..5) / AC-3 track (optional)
D - Device number: 0..3 (optional)
Controls:
@@ -63,9 +60,10 @@ ChanUp/ChanDn - Switch channel up/down
Up/Down - Switch channel up/down
0-9 - Select channel
Ok - Switch between display modes: basic, transponder, stream, AC-3
Right/Left - Switch to next/previous device that provides the current channel
Green - Select language (APID)
Green - Select next audio track
Yellow - Select audio channel: stereo, mono left, mono right
Back - Exit plugin
Left/Right - Switch to next/previous device that provides the current channel
Installation:
@@ -79,17 +77,18 @@ make plugins
Notes:
- The plugin supports only those DVB cards with _one_ frontend (do any cards
with multiple frontends even exist?), because I haven't yet figured howto do
it without patching the VDR core.
- Sometimes (read always) ttxtsubs plugin messes up the OSD - user should disable
ttxtsubs, but closing and reopening the femon plugin might help temporarily as
well. Btw., this same thing happens with OSDTeletext plugin too :)
- The plugin supports only those DVB cards with _one_ frontend, because I
haven't yet figured howto do it without patching the VDR core.
- Disable the stream analyze to speed up heavy zapping sessions.
- The signal strength and signal-to-noise ratio values are comparable only
between the same brand/model frontends. Due to the lack of proper frontend
specifications those values cannot be calculated into any real units.
- Shrinked OSD is available for NTSC users: make NTSC_SYSTEM=1
- The device switching feature is still non-functional.
- If the OSD isn't visible, you've configured the OSD height too big or too
small. Please, try to adjust the variable on the setup page before writing
any bug reports. NTSC users should use a shrinked default OSD height by
compiling the plugin with: make FEMON_NTSC=1
"Femon - A real womon who lives according to her natural feminine inclinations."

201
femon.c
View File

@@ -6,26 +6,31 @@
* $Id$
*/
#include <vdr/remote.h>
#include "femoncfg.h"
#include "femoni18n.h"
#include "femonreceiver.h"
#include "femonosd.h"
#include "femonservice.h"
#include "femontools.h"
#include "femon.h"
#if VDRVERSNUM && VDRVERSNUM >= 10307
#error "You don't exist! Go away!"
#if defined(APIVERSNUM) && APIVERSNUM < 10400
#error "VDR-1.4.0 API version or greater is required!"
#endif
cPluginFemon::cPluginFemon(void)
cPluginFemon::cPluginFemon()
{
// Initialize any member variables here.
// DON'T DO ANYTHING ELSE THAT MAY HAVE SIDE EFFECTS, REQUIRE GLOBAL
// VDR OBJECTS TO EXIST OR PRODUCE ANY OUTPUT!
Dprintf("%s()\n", __PRETTY_FUNCTION__);
}
cPluginFemon::~cPluginFemon()
{
// Clean up after yourself!
Dprintf("%s()\n", __PRETTY_FUNCTION__);
}
const char *cPluginFemon::CommandLineHelp(void)
@@ -53,6 +58,11 @@ bool cPluginFemon::Start(void)
return true;
}
void cPluginFemon::Stop(void)
{
// Stop the background activities.
}
void cPluginFemon::Housekeeping(void)
{
// Perform any cleanup or other regular tasks.
@@ -61,7 +71,8 @@ void cPluginFemon::Housekeeping(void)
cOsdObject *cPluginFemon::MainMenuAction(void)
{
// Perform the action when selected from the main VDR menu.
return new cFemonOsd();
Dprintf("%s()\n", __PRETTY_FUNCTION__);
return cFemonOsd::Instance(true);
}
bool cPluginFemon::SetupParse(const char *Name, const char *Value)
@@ -71,6 +82,10 @@ bool cPluginFemon::SetupParse(const char *Name, const char *Value)
else if (!strcasecmp(Name, "SyslogOutput")) femonConfig.syslogoutput = atoi(Value);
else if (!strcasecmp(Name, "DisplayMode")) femonConfig.displaymode = atoi(Value);
else if (!strcasecmp(Name, "Position")) femonConfig.position = atoi(Value);
else if (!strcasecmp(Name, "OSDHeight")) femonConfig.osdheight = atoi(Value);
else if (!strcasecmp(Name, "OSDOffset")) femonConfig.osdoffset = atoi(Value);
else if (!strcasecmp(Name, "Skin")) femonConfig.skin = atoi(Value);
else if (!strcasecmp(Name, "Theme")) femonConfig.theme = atoi(Value);
else if (!strcasecmp(Name, "ShowCASystem")) femonConfig.showcasystem = atoi(Value);
else if (!strcasecmp(Name, "RedLimit")) femonConfig.redlimit = atoi(Value);
else if (!strcasecmp(Name, "GreenLimit")) femonConfig.greenlimit = atoi(Value);
@@ -79,17 +94,151 @@ bool cPluginFemon::SetupParse(const char *Name, const char *Value)
else if (!strcasecmp(Name, "CalcInterval")) femonConfig.calcinterval = atoi(Value);
else
return false;
if (femonConfig.displaymode < 0 || femonConfig.displaymode >= modeMaxNumber) femonConfig.displaymode = 0;
if (femonConfig.displaymode < 0 || femonConfig.displaymode >= eFemonModeMaxNumber) femonConfig.displaymode = 0;
return true;
}
bool cPluginFemon::Service(const char *Id, void *Data)
{
if ((strcmp(Id,"FemonService-v1.0") == 0) && Data) {
FemonService_v1_0 *data = (FemonService_v1_0*)Data;
int ndx = cDevice::ActualDevice()->CardIndex();
data->fe_name = getFrontendName(ndx);
data->fe_status = getFrontendStatus(ndx);
data->fe_snr = getSNR(ndx);
data->fe_signal = getSignal(ndx);
data->fe_ber = getBER(ndx);
data->fe_unc = getUNC(ndx);
data->video_bitrate = cFemonOsd::Instance() ? cFemonOsd::Instance()->GetVideoBitrate() : 0.0;
data->audio_bitrate = cFemonOsd::Instance() ? cFemonOsd::Instance()->GetAudioBitrate() : 0.0;
data->dolby_bitrate = cFemonOsd::Instance() ? cFemonOsd::Instance()->GetDolbyBitrate() : 0.0;
return true;
}
return false;
}
const char **cPluginFemon::SVDRPHelpPages(void)
{
static const char *HelpPages[] = {
"OPEN\n"
" Open femon plugin.",
"QUIT\n"
" Close femon plugin.",
"NEXT\n"
" Switch to next possible device.",
"PREV\n"
" Switch to previous possible device.",
"NAME\n"
" Print the current frontend name.",
"STAT\n"
" Print the current frontend status.",
"SGNL\n"
" Print the current signal strength.",
"SNRA\n"
" Print the current signal-to-noise ratio.",
"BERA\n"
" Print the current bit error rate.",
"UNCB\n"
" Print the current uncorrcted blocks rate.",
"VIBR\n"
" Print the actual device and current video bitrate [Mbit/s].",
"AUBR\n"
" Print the actual device and current audio bitrate [kbit/s].",
"DDBR\n"
" Print the actual device and current dolby bitrate [kbit/s].",
NULL
};
return HelpPages;
}
cString cPluginFemon::SVDRPCommand(const char *Command, const char *Option, int &ReplyCode)
{
if (strcasecmp(Command, "OPEN") == 0) {
if (!cFemonOsd::Instance())
cRemote::CallPlugin("femon");
return cString("Opening femon plugin");
}
else if (strcasecmp(Command, "QUIT") == 0) {
if (cFemonOsd::Instance())
cRemote::Put(kBack);
return cString("Closing femon plugin");
}
else if (strcasecmp(Command, "NEXT") == 0) {
if (cFemonOsd::Instance())
return cString::sprintf("Switching to next device: %s", cFemonOsd::Instance()->DeviceSwitch(1) ? "ok" : "failed");
else
return cString("Cannot switch device");
}
else if (strcasecmp(Command, "PREV") == 0) {
if (cFemonOsd::Instance())
return cString::sprintf("Switching to previous device: %s", cFemonOsd::Instance()->DeviceSwitch(-1) ? "ok" : "failed");
else
return cString("Cannot switch device");
}
else if (strcasecmp(Command, "NAME") == 0) {
return getFrontendName(cDevice::ActualDevice()->CardIndex());
}
else if (strcasecmp(Command, "STAT") == 0) {
return getFrontendStatus(cDevice::ActualDevice()->CardIndex());
}
else if (strcasecmp(Command, "SGNL") == 0) {
int value = getSignal(cDevice::ActualDevice()->CardIndex());
return cString::sprintf("%04X (%02d%%) on device #%d", value, value / 655, cDevice::ActualDevice()->CardIndex());
}
else if (strcasecmp(Command, "SNRA") == 0) {
int value = getSNR(cDevice::ActualDevice()->CardIndex());
return cString::sprintf("%04X (%02d%%) on device #%d", value, value / 655, cDevice::ActualDevice()->CardIndex());
}
else if (strcasecmp(Command, "BERA") == 0) {
return cString::sprintf("%08X on device #%d", getBER(cDevice::ActualDevice()->CardIndex()), cDevice::ActualDevice()->CardIndex());
}
else if (strcasecmp(Command, "UNCB") == 0) {
return cString::sprintf("%08X on device #%d", getUNC(cDevice::ActualDevice()->CardIndex()), cDevice::ActualDevice()->CardIndex());
}
else if (strcasecmp(Command, "VIBR") == 0) {
if (cFemonOsd::Instance())
return cString::sprintf("%.2f Mbit/s on device #%d", cFemonOsd::Instance()->GetVideoBitrate(), cDevice::ActualDevice()->CardIndex());
else
return cString::sprintf("--- Mbit/s on device #%d", cDevice::ActualDevice()->CardIndex());
}
else if (strcasecmp(Command, "AUBR") == 0) {
if (cFemonOsd::Instance())
return cString::sprintf("%.0f kbit/s on device #%d", cFemonOsd::Instance()->GetAudioBitrate(), cDevice::ActualDevice()->CardIndex());
else
return cString::sprintf("--- kbit/s on device #%d", cDevice::ActualDevice()->CardIndex());
}
else if (strcasecmp(Command, "DDBR") == 0) {
if (cFemonOsd::Instance())
return cString::sprintf("%.0f kbit/s on device #%d", cFemonOsd::Instance()->GetDolbyBitrate(), cDevice::ActualDevice()->CardIndex());
else
return cString::sprintf("--- kbit/s on device #%d", cDevice::ActualDevice()->CardIndex());
}
return NULL;
}
cMenuFemonSetup::cMenuFemonSetup(void)
{
dispmodes[modeBasic] = tr("basic");
dispmodes[modeTransponder] = tr("transponder");
dispmodes[modeStream] = tr("stream");
dispmodes[modeAC3] = tr("AC-3");
Dprintf("%s()\n", __PRETTY_FUNCTION__);
dispmodes[eFemonModeBasic] = tr("basic");
dispmodes[eFemonModeTransponder] = tr("transponder");
dispmodes[eFemonModeStream] = tr("stream");
dispmodes[eFemonModeAC3] = tr("AC-3");
skins[eFemonSkinClassic] = tr("Classic");
skins[eFemonSkinElchi] = tr("Elchi");
themes[eFemonThemeClassic] = tr("Classic");
themes[eFemonThemeElchi] = tr("Elchi");
themes[eFemonThemeDeepBlue] = tr("DeepBlue");
themes[eFemonThemeMoronimo] = tr("Moronimo");
themes[eFemonThemeEnigma] = tr("Enigma");
themes[eFemonThemeEgalsTry] = tr("EgalsTry");
themes[eFemonThemeDuotone] = tr("Duotone");
themes[eFemonThemeSilverGreen] = tr("SilverGreen");
data = femonConfig;
Setup();
}
@@ -98,17 +247,21 @@ void cMenuFemonSetup::Setup(void)
int current = Current();
Clear();
Add(new cMenuEditBoolItem( tr("Hide Mainmenu Entry"), &femonConfig.hidemenu, tr("no"), tr("yes")));
Add(new cMenuEditBoolItem( tr("Use Syslog Output"), &femonConfig.syslogoutput, tr("no"), tr("yes")));
Add(new cMenuEditStraItem( tr("Default Display Mode"), &femonConfig.displaymode, modeMaxNumber, dispmodes));
Add(new cMenuEditBoolItem( tr("Position"), &femonConfig.position, tr("bottom"), tr("top")));
Add(new cMenuEditBoolItem( tr("Show CA System"), &femonConfig.showcasystem, tr("no"), tr("yes")));
Add(new cMenuEditIntItem( tr("Red Limit [%]"), &femonConfig.redlimit, 1, 50));
Add(new cMenuEditIntItem( tr("Green Limit [%]"), &femonConfig.greenlimit, 51, 100));
Add(new cMenuEditIntItem( tr("OSD Update Interval [0.1s]"), &femonConfig.updateinterval, 1, 100));
Add(new cMenuEditBoolItem( tr("Analyze Stream"), &femonConfig.analyzestream, tr("no"), tr("yes")));
Add(new cMenuEditBoolItem( tr("Hide main menu entry"), &data.hidemenu, tr("no"), tr("yes")));
Add(new cMenuEditBoolItem( tr("Use syslog output"), &data.syslogoutput, tr("no"), tr("yes")));
Add(new cMenuEditStraItem( tr("Default display mode"), &data.displaymode, eFemonModeMaxNumber, dispmodes));
Add(new cMenuEditStraItem( tr("Skin"), &data.skin, eFemonSkinMaxNumber, skins));
Add(new cMenuEditStraItem( tr("Theme"), &data.theme, eFemonThemeMaxNumber,themes));
Add(new cMenuEditBoolItem( tr("Position"), &data.position, tr("bottom"), tr("top")));
Add(new cMenuEditIntItem( tr("Height"), &data.osdheight, 400, 500));
Add(new cMenuEditIntItem( tr("Horizontal offset"), &data.osdoffset, -50, 50));
Add(new cMenuEditBoolItem( tr("Show CA system"), &data.showcasystem, tr("no"), tr("yes")));
Add(new cMenuEditIntItem( tr("Red limit [%]"), &data.redlimit, 1, 50));
Add(new cMenuEditIntItem( tr("Green limit [%]"), &data.greenlimit, 51, 100));
Add(new cMenuEditIntItem( tr("OSD update interval [0.1s]"), &data.updateinterval, 1, 100));
Add(new cMenuEditBoolItem( tr("Analyze stream"), &data.analyzestream, tr("no"), tr("yes")));
if (femonConfig.analyzestream)
Add(new cMenuEditIntItem(tr("Calculation Interval [0.1s]"), &femonConfig.calcinterval, 1, 100));
Add(new cMenuEditIntItem(tr("Calculation interval [0.1s]"), &data.calcinterval, 1, 100));
SetCurrent(Get(current));
Display();
@@ -116,10 +269,16 @@ void cMenuFemonSetup::Setup(void)
void cMenuFemonSetup::Store(void)
{
Dprintf("%s()\n", __PRETTY_FUNCTION__);
femonConfig = data;
SetupStore("HideMenu", femonConfig.hidemenu);
SetupStore("SyslogOutput", femonConfig.syslogoutput);
SetupStore("DisplayMode", femonConfig.displaymode);
SetupStore("Skin", femonConfig.skin);
SetupStore("Theme", femonConfig.theme);
SetupStore("Position", femonConfig.position);
SetupStore("OSDHeight", femonConfig.osdheight);
SetupStore("OSDOffset", femonConfig.osdoffset);
SetupStore("ShowCASystem", femonConfig.showcasystem);
SetupStore("RedLimit", femonConfig.redlimit);
SetupStore("GreenLimit", femonConfig.greenlimit);
@@ -130,11 +289,11 @@ void cMenuFemonSetup::Store(void)
eOSState cMenuFemonSetup::ProcessKey(eKeys Key)
{
int oldAnalyzestream = femonConfig.analyzestream;
int oldAnalyzestream = data.analyzestream;
eOSState state = cMenuSetupPage::ProcessKey(Key);
if (Key != kNone && (femonConfig.analyzestream != oldAnalyzestream)) {
if (Key != kNone && (data.analyzestream != oldAnalyzestream)) {
Setup();
}

19
femon.h
View File

@@ -11,13 +11,11 @@
#include <vdr/plugin.h>
static const char *VERSION = "0.0.7";
static const char *DESCRIPTION = "DVB Signal Information Monitor (OSD)";
static const char *MAINMENUENTRY = "Signal Information";
static const char VERSION[] = "1.0.0";
static const char DESCRIPTION[] = "DVB Signal Information Monitor (OSD)";
static const char MAINMENUENTRY[] = "Signal Information";
class cPluginFemon : public cPlugin {
private:
// Add any member variables or functions you may need here.
public:
cPluginFemon(void);
virtual ~cPluginFemon();
@@ -27,16 +25,25 @@ public:
virtual bool ProcessArgs(int argc, char *argv[]);
virtual bool Initialize(void);
virtual bool Start(void);
virtual void Stop(void);
virtual void Housekeeping(void);
virtual void MainThreadHook(void) {}
virtual cString Active(void) { return NULL; }
virtual const char *MainMenuEntry(void) { return (femonConfig.hidemenu ? NULL : tr(MAINMENUENTRY)); }
virtual cOsdObject *MainMenuAction(void);
virtual cMenuSetupPage *SetupMenu(void);
virtual bool SetupParse(const char *Name, const char *Value);
virtual bool Service(const char *Id, void *Data);
virtual const char **SVDRPHelpPages(void);
virtual cString SVDRPCommand(const char *Command, const char *Option, int &ReplyCode);
};
class cMenuFemonSetup : public cMenuSetupPage {
private:
const char *dispmodes[modeMaxNumber];
const char *dispmodes[eFemonModeMaxNumber];
const char *skins[eFemonSkinMaxNumber];
const char *themes[eFemonThemeMaxNumber];
cFemonConfig data;
virtual void Setup(void);
protected:
virtual eOSState ProcessKey(eKeys Key);

View File

@@ -14,6 +14,8 @@ cFemonConfig::cFemonConfig(void)
{
hidemenu = 0;
displaymode = 0;
skin = 0;
theme = 0;
position = 1;
redlimit = 33;
greenlimit = 66;
@@ -22,4 +24,110 @@ cFemonConfig::cFemonConfig(void)
calcinterval = 20;
syslogoutput = 0;
showcasystem = 0;
#ifdef NTSC
osdheight = 420;
#else
osdheight = 480;
#endif
osdoffset = 0;
}
const cFemonTheme femonTheme[eFemonThemeMaxNumber] =
{
{
// eFemonThemeClassic
4, // bpp
0x7F000000, // clrBackground
0xFFFCFCFC, // clrTitleBackground
0xFF000000, // clrTitleText
0xFFFCC024, // clrActiveText
0xFFFCFCFC, // clrInactiveText
0xFFFC1414, // clrRed
0xFFFCC024, // clrYellow
0xFF24FC24, // clrGreen
},
{
// eFemonThemeElchi
4, // bpp
0xC8000066, // clrBackground
0xC833AAEE, // clrTitleBackground
0xFF000000, // clrTitleText
0xFFCCBB22, // clrActiveText
0xFFFFFFFF, // clrInactiveText
0xFFFF0000, // clrRed
0xFFFFEE00, // clrYellow
0xFF33CC33, // clrGreen
},
{
// eFemonThemeDeepBlue
4, // bpp
0xC80C0C0C, // clrBackground
0xC832557A, // clrTitleBackground
0xFF000000, // clrTitleText
0xFFCE7B00, // clrActiveText
0xFF9A9A9A, // clrInactiveText
0xFF992900, // clrRed
0xFFCE7B00, // clrYellow
0xFF336600, // clrGreen
},
{
// eFemonThemeMoronimo
4, // bpp
0xDF294A6B, // clrBackground
0xDF3E5578, // clrTitleBackground
0xFF9BBAD7, // clrTitleText
0xFFCE7B00, // clrActiveText
0xFF9A9A9A, // clrInactiveText
0xFF992900, // clrRed
0xFFCE7B00, // clrYellow
0xFF336600, // clrGreen
},
{
// eFemonThemeEnigma
4, // bpp
0xB8DEE5FA, // clrBackground
0xB84158BC, // clrTitleBackground
0xFFFFFFFF, // clrTitleText
0xFF000000, // clrActiveText
0xFF000000, // clrInactiveText
0xB8C40000, // clrRed
0xB8C4C400, // clrYellow
0xB800C400, // clrGreen
},
{
// eFemonThemeEgalsTry
4, // bpp
0xCA2B1B9E, // clrBackground
0xDFBEBAC3, // clrTitleBackground
0xFF280249, // clrTitleText
0xFFD4D7DB, // clrActiveText
0xDFCFCFCF, // clrInactiveText
0xFFFF0000, // clrRed
0xFFFCC024, // clrYellow
0xFF20980B, // clrGreen
},
{
// eFemonThemeDuotone
2, // bpp
0x7F000000, // clrBackground
0xFFFCFCFC, // clrTitleBackground
0x7F000000, // clrTitleText
0xFFFCFCFC, // clrActiveText
0xFFFCFCFC, // clrInactiveText
0xFFFC1414, // clrRed
0xFFFCFCFC, // clrYellow
0xFFFCFCFC, // clrGreen
},
{
// eFemonThemeSilverGreen
4, // bpp
0xD9526470, // clrBackground
0xD9293841, // clrTitleBackground
0xFFB3BDCA, // clrTitleText
0xFFCE7B00, // clrActiveText
0xFFB3BDCA, // clrInactiveText
0xFF992900, // clrRed
0xFFCE7B00, // clrYellow
0xFF336600, // clrGreen
},
};

View File

@@ -9,13 +9,14 @@
#ifndef __FEMONCFG_H
#define __FEMONCFG_H
enum dispModes {
modeBasic,
modeTransponder,
modeStream,
modeAC3,
modeMaxNumber
};
enum eFemonModes
{
eFemonModeBasic,
eFemonModeTransponder,
eFemonModeStream,
eFemonModeAC3,
eFemonModeMaxNumber
};
struct cFemonConfig
{
@@ -23,6 +24,8 @@ public:
cFemonConfig(void);
int hidemenu;
int displaymode;
int skin;
int theme;
int position;
int redlimit;
int greenlimit;
@@ -31,8 +34,45 @@ public:
int calcinterval;
int syslogoutput;
int showcasystem;
int osdheight;
int osdoffset;
};
extern cFemonConfig femonConfig;
enum eFemonSkins
{
eFemonSkinClassic,
eFemonSkinElchi,
eFemonSkinMaxNumber
};
enum eFemonThemes
{
eFemonThemeClassic,
eFemonThemeElchi,
eFemonThemeDeepBlue,
eFemonThemeMoronimo,
eFemonThemeEnigma,
eFemonThemeEgalsTry,
eFemonThemeDuotone,
eFemonThemeSilverGreen,
eFemonThemeMaxNumber
};
struct cFemonTheme
{
int bpp;
int clrBackground;
int clrTitleBackground;
int clrTitleText;
int clrActiveText;
int clrInactiveText;
int clrRed;
int clrYellow;
int clrGreen;
};
extern const cFemonTheme femonTheme[eFemonThemeMaxNumber];
#endif // __FEMONCFG_H

340
femonclient-0.0.1/COPYING Normal file
View File

@@ -0,0 +1,340 @@
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.

View File

@@ -0,0 +1,6 @@
VDR Plugin 'femonclient' Revision History
-----------------------------------------
2005-08-28: Version 0.0.1
- Initial revision.

View File

@@ -0,0 +1,81 @@
#
# Makefile for a Video Disk Recorder plugin
#
# $Id: Makefile 1.1 2005/08/21 10:43:12 kls Exp $
# The official name of this plugin.
# This name will be used in the '-P...' option of VDR to load the plugin.
# By default the main source file also carries this name.
#
PLUGIN = femonclient
### The version number of this plugin (taken from the main source file):
VERSION = $(shell grep 'static const char VERSION\[\] *=' $(PLUGIN).c | awk '{ print $$6 }' | sed -e 's/[";]//g')
### The C++ compiler and options:
CXX ?= g++
CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual
### The directory environment:
VDRDIR = ../../../..
LIBDIR = ../../../lib
TMPDIR = /tmp
### Allow user defined options to overwrite defaults:
-include $(VDRDIR)/Make.config
### The version number of VDR's plugin API (taken from VDR's "config.h"):
APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h)
### The name of the distribution archive:
ARCHIVE = $(PLUGIN)-$(VERSION)
PACKAGE = vdr-$(ARCHIVE)
### Includes and Defines (add further entries here):
INCLUDES += -I$(VDRDIR)/include -I$(VDRDIR)/PLUGINS/src/femon/
DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
### The object files (add further files here):
OBJS = $(PLUGIN).o
### Implicit rules:
%.o: %.c
$(CXX) $(CXXFLAGS) -c $(DEFINES) $(INCLUDES) $<
# Dependencies:
MAKEDEP = g++ -MM -MG
DEPFILE = .dependencies
$(DEPFILE): Makefile
@$(MAKEDEP) $(DEFINES) $(INCLUDES) $(OBJS:%.o=%.c) > $@
-include $(DEPFILE)
### Targets:
all: libvdr-$(PLUGIN).so
libvdr-$(PLUGIN).so: $(PLUGIN).o
$(CXX) $(CXXFLAGS) -shared $(PLUGIN).o -o $@
@cp $@ $(LIBDIR)/$@.$(APIVERSION)
dist: clean
@-rm -rf $(TMPDIR)/$(ARCHIVE)
@mkdir $(TMPDIR)/$(ARCHIVE)
@cp -a * $(TMPDIR)/$(ARCHIVE)
@tar czf $(PACKAGE).tgz -C $(TMPDIR) $(ARCHIVE)
@-rm -rf $(TMPDIR)/$(ARCHIVE)
@echo Distribution package created as $(PACKAGE).tgz
clean:
@-rm -f $(OBJS) $(DEPFILE) *.so *.tgz core* *~

14
femonclient-0.0.1/README Normal file
View File

@@ -0,0 +1,14 @@
This is a "plugin" for the Video Disk Recorder (VDR).
Written by: R o l f . A h r e n b e r g @ s c i . f i
Project's homepage: http://www.saunalahti.fi/~rahrenbe/vdr/femon/
Latest version available at: http://www.saunalahti.fi/~rahrenbe/vdr/femon/
See the file COPYING for license information.
Description:
Demo client for the service interface of the Femon plugin.

View File

@@ -0,0 +1,51 @@
/*
* femonclient.c: Demo femon service client plugin
*
* See the README file for copyright information and how to reach the author.
*
* $Id: $
*/
#include <stdlib.h>
#include <vdr/interface.h>
#include <vdr/plugin.h>
#include "femonservice.h"
static const char VERSION[] = "0.0.1";
static const char DESCRIPTION[] = "Femon client";
static const char MAINMENUENTRY[] = "Show frontend statistic on console";
class cPluginFemonClient : public cPlugin {
public:
virtual const char *Version(void) { return VERSION; }
virtual const char *Description(void) { return DESCRIPTION; }
virtual const char *MainMenuEntry(void) { return MAINMENUENTRY; }
virtual cOsdObject *MainMenuAction(void);
};
// --- cPluginFemonClient ----------------------------------------------------------
cOsdObject *cPluginFemonClient::MainMenuAction(void)
{
FemonService_v1_0 femon;
cPlugin *p;
p = cPluginManager::CallFirstService("FemonService-v1.0", &femon);
if (p) {
printf("Device : %s\n", *femon.fe_name);
printf("Status : %s\n", *femon.fe_status);
printf("Signal : %04X (%2d%%)\n", femon.fe_signal, femon.fe_signal / 655);
printf("SNR : %04X (%2d%%)\n", femon.fe_snr, femon.fe_snr / 655);
printf("BER : %08X\n", femon.fe_ber);
printf("UNC : %08X\n", femon.fe_unc);
printf("Video : %.2f Mbit/s\n", femon.video_bitrate);
printf("Audio : %.0f kbit/s\n", femon.audio_bitrate);
printf("Dolby : %.0f kbit/s\n", femon.dolby_bitrate);
}
else
printf("\n--- No support for FemonService-v1.0 found ---\n");
return NULL;
}
VDRPLUGINCREATOR(cPluginFemonClient); // Don't touch this!

File diff suppressed because it is too large Load Diff

View File

@@ -9,7 +9,6 @@
#ifndef __FEMONI18N_H
#define __FEMONI18N_H
#include <vdr/config.h> // for VDRVERSNUM
#include <vdr/i18n.h>
extern const tI18nPhrase Phrases[];

1038
femonosd.c

File diff suppressed because it is too large Load Diff

View File

@@ -16,41 +16,53 @@
#include <vdr/thread.h>
#include <vdr/status.h>
#include <vdr/channels.h>
#include <vdr/font.h>
#include <vdr/transfer.h>
#include <vdr/tools.h>
class cFemonOsd : public cOsdObject, public cThread, public cStatus {
private:
bool m_Active;
cOsdBase *m_Osd;
tWindowHandle m_InfoWindow;
tWindowHandle m_StatusWindow;
static cFemonOsd *pInstance;
cOsd *m_Osd;
cFemonReceiver *m_Receiver;
int m_Frontend;
struct dvb_frontend_info m_FrontendInfo;
int m_Number;
int m_OldNumber;
int m_InputTime;
uint16_t m_SNR;
uint16_t m_Signal;
uint32_t m_BER;
uint32_t m_UNC;
fe_status_t m_FrontendStatus;
int m_DisplayMode;
eDvbFont m_Font;
const cFont *m_Font;
cTimeMs m_InputTime;
cMutex* m_Mutex;
static cBitmap bmStereo, bmMonoLeft, bmMonoRight, bmDD, bmDD20, bmDD51;
static cBitmap bmZero, bmDevice, bmPAL, bmNTSC, bmOne, bmTwo, bmThree, bmFour, bmFive;
static cBitmap bmAspectRatio_1_1, bmAspectRatio_16_9, bmAspectRatio_2_21_1, bmAspectRatio_4_3;
static cBitmap bmLock, bmSignal, bmCarrier, bmViterbi, bmSync;
void DrawStatusWindow(void);
void DrawInfoWindow(void);
protected:
cFemonOsd();
cFemonOsd(const cFemonOsd&);
cFemonOsd& operator= (const cFemonOsd&);
virtual void Action(void);
virtual void ChannelSwitch(const cDevice * device, int channelNumber);
virtual void SetAudioTrack(int Index, const char * const *Tracks);
public:
cFemonOsd(void);
static cFemonOsd *Instance(bool create = false);
~cFemonOsd();
virtual void Show(void);
virtual eOSState ProcessKey(eKeys Key);
bool DeviceSwitch(int direction);
double GetVideoBitrate(void);
double GetAudioBitrate(void);
double GetDolbyBitrate(void);
};
#endif //__FEMONOSD_H

View File

@@ -7,6 +7,7 @@
*/
#include <unistd.h>
#include "femontools.h"
#include "femoncfg.h"
#include "femonreceiver.h"
@@ -16,18 +17,13 @@
#define PAYLOAD 0x10
#define PTS_DTS_FLAGS 0xC0
cFemonReceiver::cFemonReceiver(int Ca, int Vpid, int Apid, int Dpid)
#if VDRVERSNUM >= 10300
:cReceiver(Ca, -1, 3, Vpid, Apid, Dpid), cThread("femon receiver")
#else
:cReceiver(Ca, -1, 3, Vpid, Apid, Dpid)
#endif
cFemonReceiver::cFemonReceiver(int Ca, int Vpid, int Apid[], int Dpid[])
:cReceiver(Ca, -1, Vpid, Apid, Dpid, NULL), cThread("femon receiver")
{
//printf("cFemonReceiver::cFemonReceiver()\n");
m_Active = false;
Dprintf("%s()\n", __PRETTY_FUNCTION__);
m_VideoPid = Vpid;
m_AudioPid = Apid;
m_AC3Pid = Dpid;
m_AudioPid = Apid[0];
m_AC3Pid = Dpid[0];
m_VideoValid = false;
m_VideoPacketCount = 0;
m_VideoHorizontalSize = 0;
@@ -61,21 +57,18 @@ cFemonReceiver::cFemonReceiver(int Ca, int Vpid, int Apid, int Dpid)
cFemonReceiver::~cFemonReceiver(void)
{
//printf("cFemonReceiver::~cFemonReceiver()\n");
if (m_Active) {
m_Active = false;
Cancel(0);
}
Dprintf("%s()\n", __PRETTY_FUNCTION__);
if (Running())
Cancel(3);
}
/* The following function originates from libdvbmpeg: */
void cFemonReceiver::GetVideoInfo(uint8_t *mbuf, int count)
{
//printf("cFemonReceiver::GetVideoInfo()\n");
uint8_t *headr;
int found = 0;
int c = 0;
m_VideoValid = false;
//m_VideoValid = false;
while ((found < 4) && ((c + 4) < count)) {
uint8_t *b;
b = mbuf + c;
@@ -164,12 +157,11 @@ static unsigned int samplerates[4] =
/* The following function originates from libdvbmpeg: */
void cFemonReceiver::GetAudioInfo(uint8_t *mbuf, int count)
{
//printf("cFemonReceiver::GetAudioInfo()\n");
uint8_t *headr;
int found = 0;
int c = 0;
int tmp = 0;
m_AudioValid = false;
//m_AudioValid = false;
while (!found && (c < count)) {
uint8_t *b = mbuf + c;
if ((b[0] == 0xff) && ((b[1] & 0xf8) == 0xf8))
@@ -218,7 +210,7 @@ void cFemonReceiver::GetAC3Info(uint8_t *mbuf, int count)
int found = 0;
int c = 0;
uint8_t frame;
m_AC3Valid = false;
//m_AC3Valid = false;
while (!found && (c < count)) {
uint8_t *b = mbuf + c;
if ((b[0] == 0x0b) && (b[1] == 0x77))
@@ -238,31 +230,84 @@ void cFemonReceiver::GetAC3Info(uint8_t *mbuf, int count)
m_AC3FrameSize <<= 1;
m_AC3BitStreamMode = (headr[3] & 7);
m_AC3AudioCodingMode = (headr[4] & 0xE0) >> 5;
if ((m_AC3AudioCodingMode & 0x01) && (m_AC3AudioCodingMode != 0x01)) // if 3 front channels
if ((m_AC3AudioCodingMode & 0x01) && (m_AC3AudioCodingMode != 0x01)) {
// 3 front channels
m_AC3CenterMixLevel = (headr[4] & 0x18) >> 3;
else
if (m_AC3AudioCodingMode & 0x04) {
// a surround channel exists
m_AC3SurroundMixLevel = (headr[4] & 0x06) >> 1;
if (m_AC3AudioCodingMode == 0x02) {
// if in 2/0 mode
m_AC3DolbySurroundMode = ((headr[4] & 0x01) << 1) | ((headr[5] & 0x80) >> 7);
m_AC3LfeOn = (headr[5] & 0x40) >> 6;
m_AC3DialogLevel = (headr[5] & 0x3e) >> 1;
}
else {
m_AC3DolbySurroundMode = FR_NOTVALID;
m_AC3LfeOn = (headr[4] & 0x01);
m_AC3DialogLevel = (headr[5] & 0xF8) >> 3;
}
}
else {
m_AC3SurroundMixLevel = FR_NOTVALID;
if (m_AC3AudioCodingMode == 0x02) {
// if in 2/0 mode
m_AC3DolbySurroundMode = (headr[4] & 0x06) >> 1;
m_AC3LfeOn = (headr[4] & 0x01);
m_AC3DialogLevel = (headr[5] & 0xF8) >> 3;
}
else {
m_AC3DolbySurroundMode = FR_NOTVALID;
m_AC3LfeOn = (headr[4] & 0x04) >> 2;
m_AC3DialogLevel = (headr[4] & 0x03) << 3 | ((headr[5] & 0xE0) >> 5);
}
}
}
else {
m_AC3CenterMixLevel = FR_NOTVALID;
if (m_AC3AudioCodingMode & 0x04) // if a surround channel exists
m_AC3SurroundMixLevel = (headr[4] & 0x06) >> 1;
else
m_AC3SurroundMixLevel = FR_NOTVALID;
if (m_AC3AudioCodingMode == 0x02) // if in 2/0 mode
m_AC3DolbySurroundMode = ((headr[4] & 1) << 1) | ((headr[5] & 0x80) >> 7);
else
m_AC3DolbySurroundMode = FR_NOTVALID;
m_AC3LfeOn = (headr[5] & 0x40) >> 6;
m_AC3DialogLevel = (headr[5] & 0x3e) >> 1;
if (m_AC3AudioCodingMode & 0x04) {
// a surround channel exists
m_AC3SurroundMixLevel = (headr[4] & 0x18) >> 3;
if (m_AC3AudioCodingMode == 0x02) {
// if in 2/0 mode
m_AC3DolbySurroundMode = (headr[4] & 0x06) >> 1;
m_AC3LfeOn = (headr[4] & 0x01);
m_AC3DialogLevel = (headr[5] & 0xF8) >> 3;
}
else {
m_AC3DolbySurroundMode = FR_NOTVALID;
m_AC3LfeOn = (headr[4] & 0x04) >> 2;
m_AC3DialogLevel = (headr[4] & 0x03) << 3 | ((headr[5] & 0xE0) >> 5);
}
}
else {
m_AC3SurroundMixLevel = FR_NOTVALID;
if (m_AC3AudioCodingMode == 0x02) {
// if in 2/0 mode
m_AC3DolbySurroundMode = (headr[4] & 0x18) >> 3;
m_AC3LfeOn = (headr[4] & 0x04) >> 2;
m_AC3DialogLevel = (headr[4] & 0x03) << 3 | ((headr[5] & 0xE0) >> 5);
}
else {
m_AC3DolbySurroundMode = FR_NOTVALID;
m_AC3LfeOn = (headr[4] & 0x10) >> 4;
m_AC3DialogLevel = ((headr[4] & 0x0F) << 1) | ((headr[5] & 0x80) >> 7);
}
}
}
}
void cFemonReceiver::Activate(bool On)
{
//printf("cFemonReceiver::Activate()\n");
Start();
Dprintf("%s(%d)\n", __PRETTY_FUNCTION__, On);
if (On)
Start();
else
Cancel();
}
void cFemonReceiver::Receive(uchar *Data, int Length)
{
//printf("cFemonReceiver::Receive()\n");
// TS packet length: TS_SIZE
if (Length == TS_SIZE) {
int pid = ((Data[1] & 0x1f) << 8) | (Data[2]);
@@ -305,12 +350,10 @@ void cFemonReceiver::Receive(uchar *Data, int Length)
void cFemonReceiver::Action(void)
{
//printf("cFemonReceiver::Action()\n");
#if (VDRVERSNUM < 10300)
isyslog("femon receiver: thread started (pid = %d)", getpid());
#endif
m_Active = true;
while (m_Active) {
Dprintf("%s()\n", __PRETTY_FUNCTION__);
cTimeMs t;
while (Running()) {
t.Set(0);
// TS packet 188 bytes - 4 byte header; MPEG standard defines 1Mbit = 1000000bit
m_VideoBitrate = (8.0 * 184.0 * m_VideoPacketCount) / (femonConfig.calcinterval * 100000.0);
m_VideoPacketCount = 0;
@@ -318,9 +361,6 @@ void cFemonReceiver::Action(void)
m_AudioPacketCount = 0;
m_AC3Bitrate = (8.0 * 184.0 * m_AC3PacketCount) / (femonConfig.calcinterval * 100.0);
m_AC3PacketCount = 0;
usleep(100000L * femonConfig.calcinterval);
cCondWait::SleepMs(100 * femonConfig.calcinterval - t.Elapsed());
}
#if (VDRVERSNUM < 10300)
isyslog("femon receiver: thread stopped (pid = %d)", getpid());
#endif
}

View File

@@ -53,7 +53,6 @@ enum eDolbySurroundMode {
class cFemonReceiver : public cReceiver, public cThread {
private:
bool m_Active;
int m_VideoPid;
int m_AudioPid;
int m_AC3Pid;
@@ -95,7 +94,7 @@ protected:
virtual void Action(void);
public:
cFemonReceiver(int Ca, int Vpid, int Apid, int Dpid);
cFemonReceiver(int Ca, int Vpid, int Apid[], int Dpid[]);
virtual ~cFemonReceiver();
bool VideoValid(void) { return m_VideoValid; }; // boolean

27
femonservice.h Normal file
View File

@@ -0,0 +1,27 @@
/*
* Frontend Status Monitor plugin for the Video Disk Recorder
*
* See the README file for copyright information and how to reach the author.
*
* $Id$
*/
#ifndef __FEMONSERVICE_H
#define __FEMONSERVICE_H
#include <linux/dvb/frontend.h>
struct FemonService_v1_0 {
cString fe_name;
cString fe_status;
uint16_t fe_snr;
uint16_t fe_signal;
uint32_t fe_ber;
uint32_t fe_unc;
double video_bitrate;
double audio_bitrate;
double dolby_bitrate;
};
#endif //__FEMONSERVICE_H

110
femontools.c Normal file
View File

@@ -0,0 +1,110 @@
/*
* Frontend Status Monitor plugin for the Video Disk Recorder
*
* See the README file for copyright information and how to reach the author.
*
* $Id$
*/
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <linux/dvb/frontend.h>
#include "femontools.h"
cString getFrontendName(int cardIndex)
{
struct dvb_frontend_info value;
char *dev = NULL;
asprintf(&dev, FRONTEND_DEVICE, cardIndex, 0);
int fe = open(dev, O_RDONLY | O_NONBLOCK);
free(dev);
if (fe < 0)
return NULL;
ioctl(fe, FE_GET_INFO, &value);
close(fe);
return (cString::sprintf("%s on device #%d", value.name, cardIndex));
}
cString getFrontendStatus(int cardIndex)
{
fe_status_t value;
char *dev = NULL;
asprintf(&dev, FRONTEND_DEVICE, cardIndex, 0);
int fe = open(dev, O_RDONLY | O_NONBLOCK);
free(dev);
if (fe < 0)
return NULL;
CHECK(ioctl(fe, FE_READ_STATUS, &value));
close(fe);
return (cString::sprintf("Status %s:%s:%s:%s:%s on device #%d", (value & FE_HAS_LOCK) ? "LOCKED" : "-", (value & FE_HAS_SIGNAL) ? "SIGNAL" : "-", (value & FE_HAS_CARRIER) ? "CARRIER" : "-", (value & FE_HAS_VITERBI) ? "VITERBI" : "-", (value & FE_HAS_SYNC) ? "SYNC" : "-", cardIndex));
}
uint16_t getSignal(int cardIndex)
{
uint16_t value = 0;
char *dev = NULL;
asprintf(&dev, FRONTEND_DEVICE, cardIndex, 0);
int fe = open(dev, O_RDONLY | O_NONBLOCK);
free(dev);
if (fe < 0)
return (value);
CHECK(ioctl(fe, FE_READ_SIGNAL_STRENGTH, &value));
close(fe);
return (value);
}
uint16_t getSNR(int cardIndex)
{
uint16_t value = 0;
char *dev = NULL;
asprintf(&dev, FRONTEND_DEVICE, cardIndex, 0);
int fe = open(dev, O_RDONLY | O_NONBLOCK);
free(dev);
if (fe < 0)
return (value);
CHECK(ioctl(fe, FE_READ_SNR, &value));
close(fe);
return (value);
}
uint32_t getBER(int cardIndex)
{
uint32_t value = 0;
char *dev = NULL;
asprintf(&dev, FRONTEND_DEVICE, cardIndex, 0);
int fe = open(dev, O_RDONLY | O_NONBLOCK);
free(dev);
if (fe < 0)
return (value);
CHECK(ioctl(fe, FE_READ_BER, &value));
close(fe);
return (value);
}
uint32_t getUNC(int cardIndex)
{
uint32_t value = 0;
char *dev = NULL;
asprintf(&dev, FRONTEND_DEVICE, cardIndex, 0);
int fe = open(dev, O_RDONLY | O_NONBLOCK);
free(dev);
if (fe < 0)
return (value);
CHECK(ioctl(fe, FE_READ_UNCORRECTED_BLOCKS, &value));
close(fe);
return (value);
}

30
femontools.h Normal file
View File

@@ -0,0 +1,30 @@
/*
* Frontend Status Monitor plugin for the Video Disk Recorder
*
* See the README file for copyright information and how to reach the author.
*
* $Id$
*/
#ifndef __FEMONTOOLS_H
#define __FEMONTOOLS_H
#include <stdint.h>
#include <vdr/tools.h>
#ifdef DEBUG
#define Dprintf(x...) printf(x);
#else
#define Dprintf(x...) ;
#endif
#define FRONTEND_DEVICE "/dev/dvb/adapter%d/frontend%d"
cString getFrontendName(int cardIndex = 0);
cString getFrontendStatus(int cardIndex = 0);
uint16_t getSNR(int cardIndex = 0);
uint16_t getSignal(int cardIndex = 0);
uint32_t getBER(int cardIndex = 0);
uint32_t getUNC(int cardIndex = 0);
#endif // __FEMONTOOLS_H

23
symbols/ar11.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const ar11_xpm[] = {
"26 18 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++++++++++++++",
"+........................+",
"+......++..........++....+",
"+...+++++.......+++++....+",
"+...+++++.......+++++....+",
"+......++...++.....++....+",
"+......++...++.....++....+",
"+......++..........++....+",
"+......++..........++....+",
"+......++..........++....+",
"+......++..........++....+",
"+......++..........++....+",
"+......++..........++....+",
"+......++..........++....+",
"+......++...++.....++....+",
"+......++...++.....++....+",
"+........................+",
"++++++++++++++++++++++++++"};

23
symbols/ar169.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const ar169_xpm[] = {
"38 18 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++++++++++++++++++++++++++",
"+....................................+",
"+......++.....++++..........++++.....+",
"+...+++++....+++++++.......++++++....+",
"+...+++++....++...++......++...+++...+",
"+......++...++........++..++....++...+",
"+......++...++........++..++....++...+",
"+......++...++............++....++...+",
"+......++...++.+++.........+++++++...+",
"+......++...+++++++.........+++.++...+",
"+......++...++....++............++...+",
"+......++...++....++............++...+",
"+......++...++....++............++...+",
"+......++...+++...++......++...++....+",
"+......++....++++++...++..+++++++....+",
"+......++.....++++....++...+++++.....+",
"+....................................+",
"++++++++++++++++++++++++++++++++++++++"};

23
symbols/ar2211.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const ar2211_xpm[] = {
"52 18 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++++++++++++++++++++++++++++++++++++++++",
"+..................................................+",
"+.....++++..........++++........++...........++....+",
"+...+++++++.......+++++++....+++++........+++++....+",
"+...++....++......++....++...+++++........+++++....+",
"+.........++............++......++...++......++....+",
"+.........++............++......++...++......++....+",
"+........+++...........+++......++...........++....+",
"+.......+++...........+++.......++...........++....+",
"+......+++...........+++........++...........++....+",
"+.....+++...........+++.........++...........++....+",
"+....+++...........+++..........++...........++....+",
"+...+++...........+++...........++...........++....+",
"+...++............++............++...........++....+",
"+...++++++++..++..++++++++......++...++......++....+",
"+...++++++++..++..++++++++......++...++......++....+",
"+..................................................+",
"++++++++++++++++++++++++++++++++++++++++++++++++++++"};

23
symbols/ar43.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const ar43_xpm[] = {
"31 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++++++++++++++++++",
"+.............................+",
"+.........++.........+++++....+",
"+........+++........+++++++...+",
"+.......++++.......++....++...+",
"+......++.++...++..++....++...+",
"+.....++..++...++........++...+",
"+.....++..++............++....+",
"+....++...++..........+++.....+",
"+...++....++..........++++....+",
"+...+++++++++...........+++...+",
"+...+++++++++............++...+",
"+.........++.......++....++...+",
"+.........++.......++...+++...+",
"+.........++...++...++++++....+",
"+.........++...++....++++.....+",
"+.............................+",
"+++++++++++++++++++++++++++++++"};

24
symbols/carrier.xpm Normal file
View File

@@ -0,0 +1,24 @@
/* XPM */
static const char *const carrier_xpm[] = {
"96 19 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++............................................................................................++",
"++............................................................................................++",
"++...........+++++.......+++++.....++++++++....++++++++....+++...++++++++...++++++++..........++",
"++..........+++++++......+++++.....+++++++++...+++++++++...+++...++++++++...+++++++++.........++",
"++..........+++.++++.....+++++.....+++...+++...+++...+++...+++...+++........+++...+++.........++",
"++.........+++...++.....+++.+++....+++...+++...+++...+++...+++...+++........+++...+++.........++",
"++.........+++..........+++.+++....++++++++....++++++++....+++...+++++++....++++++++..........++",
"++.........+++..........+++.+++....+++++++.....+++++++.....+++...+++++++....+++++++...........++",
"++.........+++.........+++...+++...+++..+++....+++..+++....+++...+++........+++..+++..........++",
"++.........+++...++....+++++++++...+++..+++....+++..+++....+++...+++........+++..+++..........++",
"++..........+++.++++...+++++++++...+++...+++...+++...+++...+++...+++........+++...+++.........++",
"++..........+++++++...+++.....+++..+++...+++...+++...+++...+++...++++++++...+++...+++.........++",
"++...........+++++....+++.....+++..+++....+++..+++....+++..+++...++++++++...+++....+++........++",
"++............................................................................................++",
"++............................................................................................++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"};

23
symbols/device.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const device_xpm[] = {
"14 18 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++",
"+.............",
"+.......+..+..",
"+.......+..+..",
"+.......+..+..",
"+....+++++++++",
"+....+++++++++",
"+......+..+...",
"+......+..+...",
"+......+..+...",
"+......+..+...",
"+...+++++++++.",
"+...+++++++++.",
"+.....+..+....",
"+.....+..+....",
"+.....+..+....",
"+.............",
"++++++++++++++"};

23
symbols/dolbydigital.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const dolbydigital_xpm[] = {
"31 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++++++++++++++++++",
"+.............................+",
"+...+++++++++++.+++++++++++...+",
"+...++.++++++++.++++++++.++...+",
"+...++...++++++.++++++...++...+",
"+...++.....++++.++++.....++...+",
"+...++......+++.+++......++...+",
"+...++.......++.++.......++...+",
"+...++.......++.++.......++...+",
"+...++.......++.++.......++...+",
"+...++.......++.++.......++...+",
"+...++......+++.+++......++...+",
"+...++.....++++.++++.....++...+",
"+...++...++++++.++++++...++...+",
"+...++.++++++++.++++++++.++...+",
"+...+++++++++++.+++++++++++...+",
"+.............................+",
"+++++++++++++++++++++++++++++++"};

View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const dolbydigital20_xpm[] = {
"55 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"+.....................................................+",
"+...+++++++++++.+++++++++++.....++++.........++++.....+",
"+...++.++++++++.++++++++.++...+++++++.......++++++....+",
"+...++...++++++.++++++...++...++....++......++..++....+",
"+...++.....++++.++++.....++.........++.....++....++...+",
"+...++......+++.+++......++.........++.....++....++...+",
"+...++.......++.++.......++........+++.....++....++...+",
"+...++.......++.++.......++.......+++......++....++...+",
"+...++.......++.++.......++......+++.......++....++...+",
"+...++.......++.++.......++.....+++........++....++...+",
"+...++......+++.+++......++....+++.........++....++...+",
"+...++.....++++.++++.....++...+++..........++....++...+",
"+...++...++++++.++++++...++...++............++..++....+",
"+...++.++++++++.++++++++.++...++++++++..++..++++++....+",
"+...+++++++++++.+++++++++++...++++++++..++...++++.....+",
"+.....................................................+",
"+++++++++++++++++++++++++++++++++++++++++++++++++++++++"};

View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const dolbydigital51_xpm[] = {
"51 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++++++++++++++++++++++++++++++++++++++",
"+.................................................+",
"+...+++++++++++.+++++++++++...+++++++........++...+",
"+...++.++++++++.++++++++.++...+++++++.....+++++...+",
"+...++...++++++.++++++...++...++..........+++++...+",
"+...++.....++++.++++.....++...++.............++...+",
"+...++......+++.+++......++...++++++.........++...+",
"+...++.......++.++.......++...+++++++........++...+",
"+...++.......++.++.......++...++...+++.......++...+",
"+...++.......++.++.......++.........++.......++...+",
"+...++.......++.++.......++.........++.......++...+",
"+...++......+++.+++......++.........++.......++...+",
"+...++.....++++.++++.....++...++....++.......++...+",
"+...++...++++++.++++++...++...++...+++.......++...+",
"+...++.++++++++.++++++++.++...+++++++...++...++...+",
"+...+++++++++++.+++++++++++....+++++....++...++...+",
"+.................................................+",
"+++++++++++++++++++++++++++++++++++++++++++++++++++"};

23
symbols/five.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const five_xpm[] = {
"15 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++",
"..............+",
"...+++++++....+",
"...+++++++....+",
"...++.........+",
"...++.........+",
"...++.........+",
"...++++++.....+",
"...+++++++....+",
"...++...+++...+",
".........++...+",
".........++...+",
"...++....++...+",
"...++...+++...+",
"...+++++++....+",
"....+++++.....+",
"..............+",
"+++++++++++++++"};

23
symbols/four.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const four_xpm[] = {
"15 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++",
"..............+",
".........++...+",
"........+++...+",
".......++++...+",
"......++.++...+",
".....++..++...+",
".....++..++...+",
"....++...++...+",
"...++....++...+",
"...+++++++++..+",
"...+++++++++..+",
".........++...+",
".........++...+",
".........++...+",
".........++...+",
"..............+",
"+++++++++++++++"};

24
symbols/lock.xpm Normal file
View File

@@ -0,0 +1,24 @@
/* XPM */
static const char *const lock_xpm[] = {
"96 19 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++............................................................................................++",
"++............................................................................................++",
"++........................+++........+++++........+++++.....+++....+++........................++",
"++........................+++.......++++++++.....+++++++....+++...+++.........................++",
"++........................+++.......+++..+++.....+++.++++...+++..+++..........................++",
"++........................+++......+++....+++...+++...++....+++.+++...........................++",
"++........................+++......+++....+++...+++.........+++++++...........................++",
"++........................+++......+++....+++...+++.........++++.+++..........................++",
"++........................+++......+++....+++...+++.........+++..+++..........................++",
"++........................+++......+++....+++...+++...++....+++...+++.........................++",
"++........................+++.......+++..+++.....+++.++++...+++...+++.........................++",
"++........................+++++++...++++++++.....+++++++....+++....+++........................++",
"++........................+++++++.....++++........+++++.....+++.....+++.......................++",
"++............................................................................................++",
"++............................................................................................++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"};

23
symbols/monoleft.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const monoleft_xpm[] = {
"17 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++++",
"+................",
"+...++...........",
"+...++++.........",
"+...++++++.......",
"+...++++++++.....",
"+...+++++++++++++",
"+...+++++++++++++",
"+...+++++++++..++",
"+...+++++++++..++",
"+...+++++++++++++",
"+...+++++++++++++",
"+...++++++++.....",
"+...++++++.......",
"+...++++.........",
"+...+++..........",
"+................",
"+++++++++++++++++"};

23
symbols/monoright.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const monoright_xpm[] = {
"17 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++++",
"+................",
"+..............++",
"+............++++",
"+..........++++++",
"+........++++++++",
"+...+++++++++++++",
"+...+++++++++++++",
"+...++..+++++++++",
"+...++..+++++++++",
"+...+++++++++++++",
"+...+++++++++++++",
"+........++++++++",
"+..........++++++",
"+............++++",
"+.............+++",
"+................",
"+++++++++++++++++"};

23
symbols/ntsc.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const ntsc_xpm[] = {
"19 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++++++",
"+.................+",
"+...++.......++...+",
"+...+++......++...+",
"+...++++.....++...+",
"+...++++.....++...+",
"+...++.++....++...+",
"+...++..++...++...+",
"+...++..++...++...+",
"+...++...++..++...+",
"+...++...++..++...+",
"+...++....++.++...+",
"+...++.....++++...+",
"+...++.....++++...+",
"+...++......+++...+",
"+...++.......++...+",
"+.................+",
"+++++++++++++++++++"};

23
symbols/one.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const one_xpm[] = {
"15 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++",
"..............+",
".......++.....+",
"....+++++.....+",
"....+++++.....+",
".......++.....+",
".......++.....+",
".......++.....+",
".......++.....+",
".......++.....+",
".......++.....+",
".......++.....+",
".......++.....+",
".......++.....+",
".......++.....+",
".......++.....+",
"..............+",
"+++++++++++++++"};

23
symbols/pal.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const pal_xpm[] = {
"18 18 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++++++",
"+................+",
"+...++++++++.....+",
"+...+++++++++....+",
"+...++.....+++...+",
"+...++......++...+",
"+...++......++...+",
"+...++.....+++...+",
"+...+++++++++....+",
"+...++++++++.....+",
"+...++...........+",
"+...++...........+",
"+...++...........+",
"+...++...........+",
"+...++...........+",
"+...++...........+",
"+................+",
"++++++++++++++++++"};

24
symbols/signal.xpm Normal file
View File

@@ -0,0 +1,24 @@
/* XPM */
static const char *const signal_xpm[] = {
"96 19 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++............................................................................................++",
"++............................................................................................++",
"++.................+++++....+++......+++++.....+++....+++.....+++++.....+++...................++",
"++...............++++++++...+++....++++++++....++++...+++.....+++++.....+++...................++",
"++...............+++..+++...+++....+++..++++...+++++..+++.....+++++.....+++...................++",
"++...............+++........+++...+++....++....+++++..+++....+++.+++....+++...................++",
"++...............++++++.....+++...+++..........++++++.+++....+++.+++....+++...................++",
"++................++++++....+++...+++..+++++...+++.++.+++....+++.+++....+++...................++",
"++..................+++++...+++...+++..+++++...+++.++++++...+++...+++...+++...................++",
"++...............+++..+++...+++...+++....+++...+++..+++++...+++++++++...+++...................++",
"++...............+++..+++...+++....+++...+++...+++..+++++...+++++++++...+++...................++",
"++................++++++....+++....+++++++++...+++...++++..+++.....+++..+++++++...............++",
"++.................++++.....+++......+++++.....+++....+++..+++.....+++..+++++++...............++",
"++............................................................................................++",
"++............................................................................................++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"};

23
symbols/stereo.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const stereo_xpm[] = {
"17 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++++",
"+................",
"+..............++",
"+............++++",
"+..........+++.++",
"+........+++...++",
"+...+++++++....++",
"+...++++++.....++",
"+...++..++.....++",
"+...++..++.....++",
"+...++++++.....++",
"+...+++++++....++",
"+........+++...++",
"+..........+++.++",
"+............++++",
"+.............+++",
"+................",
"+++++++++++++++++"};

24
symbols/sync.xpm Normal file
View File

@@ -0,0 +1,24 @@
/* XPM */
static const char *const sync_xpm[] = {
"96 19 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++............................................................................................++",
"++............................................................................................++",
"++.........................+++++...+++.....+++..+++....+++.....+++++..........................++",
"++.......................++++++++...+++...+++...++++...+++....+++++++.........................++",
"++.......................+++..+++....+++.+++....+++++..+++....+++.++++........................++",
"++.......................+++.........+++.+++....+++++..+++...+++...++.........................++",
"++.......................++++++.......+++++.....++++++.+++...+++..............................++",
"++........................++++++......+++++.....+++.++.+++...+++..............................++",
"++..........................+++++......+++......+++.++++++...+++..............................++",
"++.......................+++..+++......+++......+++..+++++...+++...++.........................++",
"++.......................+++..+++......+++......+++..+++++....+++.++++........................++",
"++........................++++++.......+++......+++...++++....+++++++.........................++",
"++.........................++++........+++......+++....+++.....+++++..........................++",
"++............................................................................................++",
"++............................................................................................++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"};

23
symbols/three.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const three_xpm[] = {
"15 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++",
"..............+",
".....+++++....+",
"....+++++++...+",
"...++....++...+",
"...++....++...+",
".........++...+",
"........++....+",
"......+++.....+",
"......++++....+",
"........+++...+",
".........++...+",
"...++....++...+",
"...++...+++...+",
"....++++++....+",
".....++++.....+",
"..............+",
"+++++++++++++++"};

23
symbols/two.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const two_xpm[] = {
"15 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++",
"..............+",
".....++++.....+",
"...+++++++....+",
"...++....++...+",
".........++...+",
".........++...+",
"........+++...+",
".......+++....+",
"......+++.....+",
".....+++......+",
"....+++.......+",
"...+++........+",
"...++.........+",
"...++++++++...+",
"...++++++++...+",
"..............+",
"+++++++++++++++"};

24
symbols/viterbi.xpm Normal file
View File

@@ -0,0 +1,24 @@
/* XPM */
static const char *const viterbi_xpm[] = {
"96 19 2 1",
". c #FFFFFF",
"+ c #000000",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++............................................................................................++",
"++............................................................................................++",
"++............+++.....+++..+++...+++++++++..++++++++...++++++++....++++++++....+++............++",
"++.............++.....++...+++...+++++++++..++++++++...+++++++++...+++++++++...+++............++",
"++.............+++...+++...+++......+++.....+++........+++...+++...+++...+++...+++............++",
"++.............+++...+++...+++......+++.....+++........+++...+++...+++...+++...+++............++",
"++..............++...++....+++......+++.....+++++++....++++++++....++++++++....+++............++",
"++..............+++.+++....+++......+++.....+++++++....+++++++.....++++++++....+++............++",
"++..............+++.+++....+++......+++.....+++........+++..+++....+++...+++...+++............++",
"++...............++.++.....+++......+++.....+++........+++..+++....+++...+++...+++............++",
"++...............+++++.....+++......+++.....+++........+++...+++...+++...+++...+++............++",
"++...............+++++.....+++......+++.....++++++++...+++...+++...+++++++++...+++............++",
"++................+++......+++......+++.....++++++++...+++....+++..++++++++....+++............++",
"++............................................................................................++",
"++............................................................................................++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++",
"++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"};

23
symbols/zero.xpm Normal file
View File

@@ -0,0 +1,23 @@
/* XPM */
static const char *const zero_xpm[] = {
"15 18 2 1",
". c #FFFFFF",
"+ c #000000",
"+++++++++++++++",
"..............+",
".....++++.....+",
"....++++++....+",
"....++..++....+",
"...++....++...+",
"...++....++...+",
"...++....++...+",
"...++....++...+",
"...++....++...+",
"...++....++...+",
"...++....++...+",
"...++....++...+",
"....++..++....+",
"....++++++....+",
".....++++.....+",
"..............+",
"+++++++++++++++"};