mirror of
https://github.com/vdr-projects/vdr.git
synced 2025-03-01 10:50:46 +00:00
771986b89f
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto. Note that the channels.conf file now supports additional parameters, so you may want to make sure you have a backup of this file in case you need to go back to the previous version of VDR! - Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl). - Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard Nissl). - Improved logging system time changes to avoid problems on slow systems under heavy load (suggested by Helmut Auer). - Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf Ahrenberg). - Fixed initializing the timer's flags in the cTimer copy constructor (thanks to Andreas Mair). - Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald). - Increased the time between checking the CAM status to 500ms to avoid problems with some CAMs (reported by Arthur Konovalov).
Video Disk Recorder ('VDR')
---------------------------
These files contain the source code of the "Video Disk Recorder",
which is based on the DVB driver of the LinuxTV project (http://linuxtv.org).
For details about the "Video Disk Recorder" project please
refer to http://www.cadsoft.de/vdr.
There is also a remote control unit described on those
Web pages, which can be used within this program.
Please see the INSTALL file for details on how to install
this program on your computer.
The MANUAL file describes how to operate the VDR.
The CONTRIBUTORS file lists all the people who have contributed to the
development of VDR.
The author can be contacted at kls@cadsoft.de.
Yet another "set-top box"?
--------------------------
The "set-top boxes" available from commercial companies all have
one major drawback: they are not "open". This project's goal is
to build an "open" digital satellite receiver and timer controlled
video disk recorder, based upon open standards and freely available
driver software (of course, the hardware still has to be bought).
The on screen menu system is simple, but shall provide all the
possibilities necessary to perform timer controlled recording,
file management and even "on disk editing". The menus
of commercial set-top boxes usually are a lot more fancy than
the ones in this system, but here we have the full source code
and can modify the menus in whatever way desired.