58 Commits

Author	SHA1	Message	Date
Klaus Schmidinger	c2d9577b3d	Version 1.7.24 ... Original announce message: VDR developer version 1.7.24 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23-1.7.24.diff MD5 checksums: a034c5e399417dfc583483f650d003ee vdr-1.7.24.tar.bz2 aa1a2b202da92e65945ff39470b26618 vdr-1.7.23-1.7.24.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed a high load in case a transponder can't be received. - Improved the way DVB_API_VERSION is checked. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed asserting there is a live programme if the primary device is bonded with a device that starts a recording on a different band. - Fixed the return type of cMyDeviceHook::DeviceProvidesTransponder() in PLUGINS.html. - Fixed a crash in a plugin using cDeviceHook when VDR ends (reported by Oliver Endriss). - Some improvements to the Makefiles (thanks to Christian Ruppert). - Fixed cRecording::LengthInSeconds(), which wrongfully rounded the result to full minutes (thanks to Christoph Haubrich). - Symbolic links are no longer resolved in cRecordings::ScanVideoDir() (thanks to Sundararaj Reel). - The epg.data file is now read in a separate thread to make the startup process faster in case the file is very large (suggested by Helmut Auer). - Fixed selecting the primary device for receiving the live viewing channel in case it is bonded with an other device and has no receiver attached to it. - Fixed a possible crash when canceling VDR while displaying subtitles, and the primary device is no longer available. - Improved handling subtitles of BBC channels. - No longer using tabs as delimiter in the EPG bugfix log (they were garbled in the log file). - Added a missing '.' after the month in VPS strings. - Added some missing 'const' to cDevice (thanks to Joachim Wilke). - Fixed handling the PrimaryLimit when requesting a device for live viewing (reported by Uwe Scheffler). - Removed superfluous calls to SetVideoFormat() from device constructors. This function is called in cDevice::SetPrimaryDevice(), anyway. - An ongoing editing process is now canceled if either the original or the edited version of the recording is deleted from the Recordings menu. - The SVDRP command DELR now won't delete a recording that is currently being edited. - Removed code stub for obsolete SVDRP command MOVT. - The DVB device adapters/frontends are now probed by scanning the /dev/dvb directory instead of looping through adapter/frontend numbers. This allows for "holes" in the device numbering. - cReadDir::Next() now skips directory entries "." and "..". - Fixed a possible deadlock in time shift mode. - Fixed switching into time shift mode when pausing live video (thanks to Reinhard Nissl for helping to debug this one).	2012-02-19 16:36:45 +01:00
Klaus Schmidinger	5a28d99936	Version 1.7.22 ... Original announce message: VDR developer version 1.7.22 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff MD5 checksums: b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2 868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't return actual values (thanks to Luca Olivetti). - The DiSEqC codes are now copied in the call to cDiseqc::Execute(). - VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on the "unicable" patch from Lars Hanisch). Since "Unicable" is a registered trademark and stands for only one of many implementations of SCR, the following changes have been made compared to the patch, which need to be taken into account by people who have set up their system using the patch: - The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr"). - The configuration file name has been changed from "unicable.conf" to "scr.conf". - Updated sources.conf (thanks to Arthur Konovalov). - The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans). - Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks to Rolf Ahrenberg). - Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans). - Fixed setting the start time of an edited recording (thanks to Christoph Haubrich). - Temporarily switching free devices to transponders in order to have their running status updated is now done by marking the devices as "occupied" for a certain amount of time. - The new setup options "LNB/Device n connected to sat cable" can be used to define which DVB-S devices are connected to the same sat cable and are therefore "bonded". This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly set up their sat devices with the above options. - Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä). - Fixed several spelling errors (thanks to Ville Skyttä). - The new SVDRP command UPDR can be used to trigger an update of the list of recordings (thanks to Lars Hanisch). - Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä). - Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä). - Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks to Ville Skyttä). - Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg). - Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg). - Fixed a crash with malformed SI data (patch from vdr-portal).	2011-12-05 20:36:02 +01:00
Klaus Schmidinger	0c96d6b626	Version 1.7.21 ... Original announce message: VDR developer version 1.7.21 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20-1.7.21.diff MD5 checksums: 7300bfd997db1a848bd774fefe4aec80 vdr-1.7.21.tar.bz2 c4e745939f31543dd607b97d58fc86be vdr-1.7.20-1.7.21.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version contains functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. From the HISTORY file: - Fixed detecting frames for channels that split frames into several payloads (reported by Derek Kelly). - Now initializing Setup.InitialChannel to an empty string to avoid problems in case there is no setup.conf. - The start time of an edited recording is now set to the time of the first editing mark (thanks to Udo Richter). This obsoletes the CUTTIME patch. - Direct access to the members start, priority, lifetime, and deleted of cRecording as well as to position and comment of cMark is now deprecated. Plugin authors should switch to the new access functions for these members. For now the macro __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS is defined in recording.h, which exposes these members, so that existing plugins will still compile. Comment out this #define to check whether a particular plugin needs to be modified. This #define may be removed in a future version. - The new functions cRecording::NumFrames() and cRecording::LengthInSeconds() return the number of frames and length (in seconds) of a recording (suggested by Steffen Barszus). - The subtitle PIDs are now stored in the channels.conf file as an extension to the TPID field (thanks to Rolf Ahrenberg). - The new function cDevice::ProvidesEIT() is used to determine whether a device can provide EIT data and will thus be used in cEITScanner::Process() to receive EIT data from the channels it can receive (suggested by Rolf Ahrenberg). Note that by default it is assumed that a device can't provide EIT data, and only the builtin cDvbDevice returns true from this function. - The Audio and Subtitles options are now available through the Green and Yellow keys in the Setup/DVB menu (thanks to Rolf Ahrenberg). This is mainly for remote controls that don't have dedicated keys for these functions. - The SVDRP command HITK now accepts multiple keys (up to 31). - The Recordings menu now displays the length (in hours:minutes) of each recording (thanks to Rolf Ahrenberg). Note that the "new" indicator has been moved from the recording time to the length column. This new format is also used by the SVDRP command LSTR, so in case you have an application that parses the LSTR output, you will need to adjust it to the new format. - The dvbsddevice plugin now supports the new option --outputonly, which disables receiving on SD FF devices and uses the device only for output (thanks to Udo Richter). - Fixed detecting frames on radio channels (reported by Chris Mayo). - Revoked the changes to cFrameDetector that have been introduced in version 1.7.19. Detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries is now done by locally skipping TS packets in cFrameDetector.	2011-09-04 17:50:17 +02:00
Klaus Schmidinger	7df66b0587	Version 1.7.20 ... Original announce message: VDR developer version 1.7.20 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19-1.7.20.diff MD5 checksums: eda2911fff1715ba5b1482b20ad18188 vdr-1.7.20.tar.bz2 a8f5bcaf3294cc9fce87283a618d5ce1 vdr-1.7.19-1.7.20.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version contains functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. From the HISTORY file: - Added some missing 'const' to tChannelID (reported by Sundararaj Reel). - The isnumber() function now checks the given pointer for NULL (thanks to Holger Dengler). - Now checking Setup.InitialChannel for NULL before using it (reported by Christoph Haubrich). - cSkins::Message() now blocks calls from background threads (thanks to Michael Eiler for reporting a crash in such a scenario). - Fixed the return value of the svdrpsend.pl script in case of an error (thanks to Jonas Diemer). - Increased MAXCAIDS to 12 (thanks to Jerome Lacarriere). - Fixed handling DiSEqC codes (thanks to Mark Hawes for reporting the bug, and Udo Richter for suggesting the fix). - Added a mechanism to defer timer handling in case of problems (reported by Frank Niederwipper). - Fixed distortions that happened when splitting recording into several files (was a side effect of "Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries" in version 1.7.19). cRecorder::Action() now buffers TS packets in case the frame type is not yet known when a new payload starts. This adds no overhead for channels that broadcast the frame type within the first TS packet of a payload; it only kicks in if that information is not in the first TS packet. - Fixed handling the channelID in cMenuEditChanItem (thanks to Udo Richter). - cStringList::Sort() can now be called with a boolean parameter that controls case insensitive sorting (suggested by Sundararaj Reel). - Now scanning new transponders before old ones, to make sure transponder changes are recognized (thanks to Reinhard Nissl). - Implemented static cIndexFile::IndexFileName(). - The length (as number of frames) of a recording's index file can now be determined by a call to cIndexFile::GetLength() (suggested by Christoph Haubrich). - Fixed some crashes in subtitle display (thanks to Rolf Ahrenberg). - Made DELETENULL() thread safe (reported by Rolf Ahrenberg). - The pic2mpg script of the 'pictures' plugin now generates HD images (thanks to Andre Weidemann for his support in using convert/ffmpeg). The old SD version is still available as pic2mpg-sd. - Added a mutex to protect cOsd::Osds from simultaneous access from different threads (reported by Rolf Ahrenberg). - The cutter now sets the 'broken link' flag for MPEG2 TS recordings (thanks to Oliver Endriss). - Fixed language code entry for Portuguese. - The new command line options --filesize (suggested by Marco Göbenich) and --split can be used together with --edit to set the maximum video file size and turn on splitting edited files at the editing marks. These options must be given before --edit to have an effect. - cTimeMs is no longer initialized to the current time if the value given to the constructor is negative (avoids the "cTimeMs: using monotonic clock..." log message before VDR's starting log message).	2011-08-16 20:32:01 +02:00
Klaus Schmidinger	8b9350c091	Version 1.7.18 ... - Changed -O2 to -O3 in Make.config.template (reported by Matti Lehtimäki). - Added a missing 'default' case in cPixmapMemory::DrawEllipse(). - Fixed some direct comparisons of double values. - Fixed detecting frames on channels that broadcast with separate "fields" instead of complete frames. - Made updating the editing marks during replay react faster in case the marks file has just been written (with a patch from Udo Richter). - Fixed horizontal scaling of subtitles (reported by Reinhard Nissl). - Stripped the note "The data returned by this function is only used for informational purposes (if any)" from the description of cDevice::GetVideoSize(). The VideoAspect is now used to properly scale subtitles. - Fixed cUnbufferedFile::Seek() in case it is compiled without USE_FADVISE (thanks to Juergen Lock). - Fixed the Language header of the Serbian translation file (thanks to Ville Skyttä). - Added anti-aliasing when upscaling bitmaps, which improves the display of SD subtitles when replayed on an HD OSD (thanks to Reinhard Nissl for his help in debugging). - Renamed cBitmap::Scale() to Scaled(), because it doesn't modify the bitmap itself, but rather returns a scaled copy. - Fixed the description of cReceiver in PLUGINS.html, regarding detaching a receiver from its device before deleting it (reported by Winfried Köhler). This change in behavior was introduced in version 1.5.7. - Fixed scaling subtitles in case the OSD size is exactly the same as the display size of the subtitles. - Added a missing initialization to sDvbSpuRect (reported by Sergiu Dotenco). - Replaced "%lld" and "%llX" print format specifiers with "PRId64" and "PRIX64" to avoid compiler warnings with gcc 4.5.2 (thanks to Sergiu Dotenco). On a personal note: I find it a step in the totally wrong direction that there have been macros introduced to work around this problem in the first place. There should have been "real" format specifiers defined that address this. These macros are nothing but an ugly workaround. - Added Cancel(3) to ~cTrueColorDemo() in the "osddemo" plugin (thanks to Reinhard Nissl). - Added a missing font deletion in cTrueColorDemo::Action() in the "osddemo" plugin (thanks to Reinhard Nissl). - Fixed a buffer overflow in cFont::Bidi() (thanks to Reinhard Nissl). - Added HD stream content identifiers to vdr.5 (thanks to Christoph Haubrich). - Made cRecordingInfo::Read(FILE *f) private to avoid calls to it from outside cRecordingInfo or cRecording (reported by Mika Laitio). - The dvbhddevice plugin is now part of the VDR distribution archive (thanks to Andreas Regel). - Removed an obsolete local variable in dvbsdffosd.c (thanks to Paul Menzel). - Fixed a possible NULL pointer dereference in osddemo.c (reported by Paul Menzel). - Now using pkg-config to get fribidi, freetype and fontconfig cflags and libs (thanks to Ville Skyttä). - The Makefile now also installs the include files (thanks to Ville Skyttä). - Added handling of "ANSI/SCTE 57" descriptors (thanks too Rolf Ahrenberg). - Avoiding an unecessary call to Recordings.ResetResume() (thanks to Reinhard Nissl).	2011-04-17 17:09:00 +02:00
Klaus Schmidinger	5619c0602b	Version 1.7.17 ... - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed following symbolic links in RemoveFileOrDir() (cont'd) (thanks to Steffen Barszus). - Changed the description of cDevice::GetSTC() to make it mandatory for devices that can replay. - Removed the check for positive STC values from cDvbSubtitleConverter::Action(). - Added cString::operator=(const char *String) (suggested by Antti Seppälä). - Some spelling fixes (thanks to Ville Skyttä). - Passing package name and version to xgettext (thanks to Ville Skyttä). - Made 'dist' target dependent on up to date *.po (thanks to Ville Skyttä). - Added Language and fixed Language-Team header of *.po (thanks to Ville Skyttä). - Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras). - Fixed detecting frames on channels that broadcast with 50 or 60 fps. This avoids artifacts during fast forward/rewind when replaying recordings from such channels. To fix the index of existing recordings from such channels, just delete the 'index' file of the recording and VDR will generate a new one the next time you play it. You should also change the line "F 25" to "F 50" in the 'info' file of that recording. - Added support for "registration descriptor" to 'libsi' and using it in pat.c (thanks to Rolf Ahrenberg). - Fixed unjustified log entries about changed channel pids (reported by Derek Kelly). - Added an include of VDR's 'Make.global' to libsi's Makefile (thanks to Rolf Ahrenberg). - Removed displaying the "contents" information from the "Classic VDR" and "ST:TNG Panels" skins, because it is often wrong and nothing but irritating. - Added typecasts to avoid gcc 4.5 warnings in switch statements on eKeys variables where additional 'k_...' flags are used. - Fixed inclusion of <stdarg.h> (thanks to Henning Heinold). - Changed "frame duration" to "frame rate" in vdr.5 (reported by Tobias Grimm). - Removing a cRemote from the Remotes list in case its initialization failed (thanks to Dominik Strasser). - Added LDFLAGS to the linker calls in the Makefiles (thanks to Joerg Bornkessel and Paul Menzel). - Now updating the 'frames per second' data in the list of recordings when a new recording is started that has a frame rate other than the default. - The include path to the freetype2 header files is now retrieved via a call to 'pkg-config --cflags freetype2' (suggested by Andreas Oberritter). - The OSD now has full TrueColor support. There can be several "pixmaps" that can be overlayed with alpha blending. All existing skins should work out of the box with the TrueColor OSD - the only exception being cOsd::GetBitmap(). Since the TrueColor OSD doesn't use bitmaps, this function will return a dummy bitmap, which may not be what the plugin expects. As long as this bitmap is only used for setting the palette, there is no problem. However, any other operations on this bitmap will have no effect. See the description of the cPixmap functions in osd.h for details about the new functionalities. The "ST:TNG Panels" skin has been enhanced to automatically use the TrueColor OSD if available. The "osddemo" plugin has been extended to show some of the possibilities of the TrueColor OSD if it is run on a system that actually provides TrueColor support. Thanks to Reinhard Nissl for some valuable input, help with debugging, and an implementation of the AlphaBlend() function. - Updated the Slovakian language texts (thanks to Milan Hrala). - Added Serbian language texts (thanks to Milan Cvijanovic). - Fixed reallocating memory in the "pictures" plugin (reported by Paul Menzel, with input from Oliver Endriss). - Fixed reallocating memory in cTsToPes::PutTs() (suggested by Oliver Endriss). - Now checking the result of all realloc() calls. - Fixed setting up the 'Recordings' menu in case there are several recordings with exactly the same name (reported by Marcus Hilbrich). - Setting the audio type of language descriptors to 0x00 in the PAT/PMT generator (thanks to Anssi Hannula). - Changed the compiler optimization flag to -O3, which gives quite a performance boost in the AlphaBlend() function. - While replaying, the editing marks are now updated every 10 seconds (based on a patch from Manuel Reimer). - Now reducing the thread and I/O priority cCuttingThread::Action() to make the foreground process more responsive (suggested by Frank Neumann). - Removed checking for minimum line length of 21 characters in the LIRC receiver code (reported by Gerald Dachs). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Now storing the original display size when handling DVB subtitles (thanks to Reinhard Nissl). - The original display size of subtitles is now used to scale them properly when displaying them on an HD OSD.	2011-03-19 19:02:09 +01:00
Klaus Schmidinger	1eb12b4973	Version 1.7.14 ... - Fixed handling empty strings in cSource::FromString(). - Assigned the source character 'I' to "IPTV" (suggested by Rolf Ahrenberg). - Assigned the source character 'V' to "Analog Video" (suggested by Lars Hanisch). This obsoletes the ANALOGTV patch. - Added support for ATSC devices (thanks to Alex Lasnier). This obsoletes the ATSC patch. - The "Source" item in the "Edit channel" menu now wraps around the list of sources (suggested by Halim Sahin). - Fixed editing channel parameters. - The new setup option "Recording/Delete timeshift recording" controls whether a timeshift recording is automatically deleted after viewing it. This obsoletes the DELTIMESHIFTREC patch. Note that the meaning of the values for this option is different from the DELTIMESHIFTREC patch: 0 means timeshift recordings are not automatically deleted (the default behavior as in previous versions), while 1 means to ask the user whether the recording shall be deleted. - Added cChannel::IsSourceType() to test if a channel's source is of a given type. - Changed the polarization characters in cDvbSourceParam::GetOsdItem() to uppercase. - The full timer file name is now displayed if it ends with "TITLE" or "EPISODE" (pointed out by Udo Richter). - Fixed "attempt to drop wrong frame from ring buffer" when skipping +/- one minute during replay. - The new setup option "Folders in timer menu" controls whether the file names in the timer menu are shown with their full folder path.	2010-03-14 11:56:00 +01:00
Klaus Schmidinger	09a17d56e2	Version 1.7.12 ... - Changed the EVCONTENTMASK_* macros to enums and changed "mask" to "group". - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - The "Edit timer" menu can now set the folder for the recording from a list of folders stored in "folders.conf". - Updated the Italian OSD texts (thanks to Diego Pierotto). - If svdrphosts.conf contains only the address of the local host, the SVDRP port is opened only for the local host (thanks to Manuel Reimer). - Renamed 'runvdr' to 'runvdr.template' and no longer copying it to the BINDIR in 'make install' (thanks to Martin Dauskardt). - Added plain text error messages to log entries from cOsd::SetAreas() (suggested by Rolf Ahrenberg). - cPalette::ClosestColor() now treats fully transparent colors as "equal"; improved cDvbSpuBitmap::getMinBpp() (thanks to Matthieu Castet and Johann Friedrichs). - The new setup option "Miscellaneous/Channels wrap" controls whether the current channel wraps around the beginning or end of the channel list when zapping (thanks to Matti Lehtimäki). - Fixed determining the frame duration on channels where the PTS deltas jitter by +/-1 around 1800. - The PCR pid in generated PMTs is now set to the channel's PCR pid again. - Fixed determining the frame duration on channels where the PTS deltas jitter by +/-1 around 3600. - The PCR pid is now recorded for channels where this is different from the video PID. To facilitate this, the interfaces of cTransfer, cTransferControl, cRecorder and cReceiver have been modified, so that the PIDs are no longer given in separate parameters, but rather the whole channel is handed down for processing. The old constructor of cReceiver is still available, but it is recommended to plugin authors that they switch to the new interface as soon as possible. When replaying such a recording, the PCR packets are sent to PlayTsVideo() - The files "commands.conf" and "reccmd.conf" can now contain nested lists of commands. See vdr.5 for information about the new file format.	2010-01-31 15:42:00 +01:00
Klaus Schmidinger	939081e274	Version 1.7.11 ... - Fixed resetting the file size when regenerating the index file. - The new function cDevice::PatPmtParser() can be used in derived devices to access the PAT/PMT of the currently replayed material. - Updated the Italian OSD texts (thanks to Diego Pierotto). - The PCR pid in generated PMTs is now set to 0x1FFF ("no PCR pid") in cPatPmtGenerator::GeneratePmt(), because VDR doesn't record the PCR pid. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - The 'sky' plugin is no longer part of the VDR source. - Improved SPU handling on devices with limited OSD capabilities (thanks to Matthieu Castet). - Several code modifications to avoid compiler warnings (thanks to Winfried Köhler). - Added stream type 11172 AUDIO to cPatPmtParser::ParsePmt() (thanks to Johann Friedrichs). - Removed debug output of '-' from cTransfer::Receive(). - Added defines for large files to the 'newplugin' script (reported by Udo Richter). - Removed the workaround for short channel names of "Kabel Deutschland", because apparently they now have their data according to the DVB standard (thanks to Johann Friedrichs). - Some fixes to dvbspu.[hc] (thanks to Johann Friedrichs). - Fixed a busy loop when moving editing marks (thanks to Johann Friedrichs). - Updated sources.conf (thanks to Derek Kelly). - Modified cCharSetConv so that it can be used to convert from "whatever VDR uses" to a given code (thanks to Joachim Wilke). - Channel names containing commas are now handled correctly in channels.conf. If a channel's short name contains a comma, it is replaced with a '.'. - cDevice now logs the device number when a new device is created. - Fixed handling STREAMTYPE_11172_AUDIO in cPatPmtParser::ParsePmt(). - cParsePatPmt now has functions to retrieve the audio, dolby and subtitle pids. - cPatFilter::Process() now only stores CA descriptors for video and audio pids (thanks to Francesco Saverio Schiavarelli for reporting a problem with channels that have some encrypted components that VDR doesn't use). - cDevice::AddPid() now stores the stream type of the given pid (thanks to Andreas Regel). - Added cFont::FontName() and cFont::Size() (thanks to Andreas Regel). - cPatPmtParser now also stores the audio stream types. - The support for full featured DVB cards of the TT/FuSi design has been moved into the new plugin 'dvbsddevice'. On systems that use such a card as their primary device, this plugin now needs to be loaded when running VDR in order to view live or recorded video. If the plugin is not loaded, the card will be treated like a budget DVB card, and there will be no OSD or viewing capability. - Fixed handling the "CA PMT" generation (revised a change not mentioned in version 1.7.9's changes, which caused a malfunction with Conax and Viaccess CAMs). - Fixed stopping subtitle display when switching the primary device (thanks to Anssi Hannula). IMPORTANT NOTE TO PLUGIN AUTHORS: a plugin that implements a derived cDevice class that can replay video must now call the MakePrimaryDevice() function of its base class. - Fixed compiler warnings "format not a string literal and no format arguments" in some syslog calls (thanks to Rolf Ahrenberg). - The new command line options --edit and --genindex can be used to edit a recording or generate its index without actually starting the entire VDR (based on a patch from Helmut Auer). - Improved the description of the transponder parameters in vdr.5 (thanks to Winfried Köhler). - Avoiding setting the video stream type to 2 if the vpid is 0 (problem reported by Arthur Konovalov). - Implemented handling the "Content Descriptor" (based on a patch from Rolf Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the textual representation of the content descriptors as "genre". The epg.data file stores the genre using the tag character 'G'. - Implemented handling the "Parental Rating Descriptor" (based on a patch from Rolf Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the parental rating (if given) in their event displays. The epg.data file stores the parental rating using the tag character 'R'. IMPORTANT NOTE: if VDR doesn't display a parental rating, this does not necessarily mean that the given programme is suitable for all audiences! - Rearranged cEvent members to minimize memory waste. - After a CLRE command, no further EPG processing is now done for 10 seconds, so that data sent with subsequent PUTE commands doesn't interfere with data from the broadcasters (suggested by Helmut Auer). - Added support for DVB cards with multiple fontends. Note that this only works for DVB cards where each frontend can be used independently of all the others on the same adapter. - Fixed plugin arguments corruption with glibc 2.11 on x86_64 (thanks to Anssi Hannula).	2010-01-06 13:34:00 +01:00
Klaus Schmidinger	ea01358b3b	Version 1.7.10 ... - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed wrong bracketing in cChannel::SubtitlingType() etc. (thanks to Rolf Ahrenberg). - Fixed not logging changes for channels that have no number (reported by Timothy D. Lenz). - Changed the project's URLs and email to tvdr.de. - Added Lithuanian language translations (thanks to Valdemaras Pipiras). - Updated Chinese language texts (thanks to Nan Feng). - Only checking DVB_API_VERSION to be >=5 in order to stay compileable in case the DVB API version number is increased (the API claims to always be backward compatible). - Fixed saving terminal settings when running in background (thanks to Manuel Reimer). - Fixed cFrameDetector::Analyze() to handle video streams where the frame type is not detectable from the first TS packet of a frame. - Fixed writing the PCR pid into the PMT in cPatPmtGenerator::GeneratePmt() (reported by Rene van den Braken). - Added Slovakian language texts (thanks to Milan Hrala). - Fixed EntriesOnSameFileSystem() to avoid using f_fsid, which may be 0 (thanks to Frank Schmirler). - Fixed starting a recording at an I-frame. - Fixed generating the index for recordings from channels that put a whole GOP into one payload unit. - The index file for TS recordings is now regenerated on-the-fly if a recording is replayed that has no index. This can also be used to re-create a broken index file by manually deleting the index file and then replaying the recording (at least until the index file has been generated). - The cRingBufferLinear::Read() function now returns -1 and sets errno to EAGAIN if the buffer is already full. - Fixed handling DVB subtitles for PES recordings (thanks to Rolf Ahrenberg). - Added the audio id to the call of PlayAudio() in cDevice::PlayTsAudio() (thanks to Andreas Schaefers). - Fixed references to old *.vdr file names in MANUAL (reported by Arthur Konovalov). - Reverted "Removed limitation to PAL resolution from SPU handling" because it cause nothing but trouble. Besides, the core VDR doesn't use this, anyway. - Fixed the default value for "Pause key handling" in the MANUAL (reported by Diego Pierotto).	2009-11-22 15:58:00 +01:00
Klaus Schmidinger	06bf4c453e	Version 1.7.9 ... - Fixed storing the current OSD size in case the device has changed it in its setup menu (reported by Reinhard Nissl). - Fixed cDevice::PlayTsVideo() and cDevice::PlayTsAudio() in case only part of the buffer has been accepted by the device (reported by Udo Richter). - Changed the EIT filter setup to save a few handles on devices that do hardware filtering. - Fixed deleting expired timers if they have the VPS flag set, but the event they are assigned to doesn't have a VPS tag. - Fixed handling file name length on VFAT systems in case they contain UTF-8 characters (thanks to Rolf Ahrenberg). - Fixed generating CaPmts in case audio and video are encrypted using different ECM pids. - Updated vdr.1 to use the new file names in recording directories. - Fixed cRecordings::DelByName() to avoid compilation errors with gcc 4.4 (thanks to Matthias Schwarzott). - Increased the value of MAXFRAMESIZE to better suit HD recordings (thanks to Reinhard Nissl). - Implemented full handling of subtitling descriptors (thanks to Mikko Tuumanen).	2009-08-23 16:04:00 +02:00
Klaus Schmidinger	ab6f2ccf42	Version 1.7.8 ... - The name of the function cDevice::GetVideoSize() wasn't very well chosen for its purpose of defining the optimum size of the OSD for the current output device. Therefore a new function named cDevice::GetOsdSize() has been introduced (suggested by Rolf Ahrenberg). Plugin authors should implement this function in classes derived from cDevice, if they are able to replay video. cDevice::GetVideoSize() still exists and should return the actual size of the video material that is currently replayed. Note that because of the many possible aspect ratios for video material, the type of the Aspect parameter of GetVideoSize() has been changed to 'double', and the Aspect parameter in both functions is named differently, because it returns different values (suggested by Reinhard Nissl). Thanks to Oliver Endriss for his input on calculating the Aspect factor in GetOsdSize(). - Fixed the way the OSD size is determined on full featured DVB cards (thanks to Oliver Endriss). - Increased MAXOSDHEIGHT to 1200 (suggested by Nicolas Huillard). - Removed limitation to PAL resolution from SPU handling. - Checking fd_video in cDvbDevice::GetVideoSize() to avoid error messages on systems with no real primary replay device (reported by Martin Neuditschko). - Added a note to cTsToPes::GetPes() about having to call it repeatedly, once it has returned a non-NULL value. - Added MPEG 1 handling to remux.c (thanks to Ales Jurik). - Fixed use of time_t in cEIT::cEIT() (thanks to Tobias Bratfisch). - Added missing update of lastOsdSizeUpdate. - EIT events are now only processed if a plausible system time is available, to avoid wrong handling of PDC descriptors (thanks to Tobias Bratfisch). - Removed unused 'synced' member from cTsToPes (reported by Christoph Haubrich). - Added a note to cTsToPes about all TS packets having to belong to the same PID, and that for video data GetPes() may only be called if the next TS packet that will be given to PutTs() has the "payload start" flag set (suggested by Christoph Haubrich). - Added a note about the meaning of PERCENTAGEDELTA in cRingBuffer::UpdatePercentage() (thanks to Rolf Ahrenberg). - The new setup option "Recording/Pause key handling" can be used to define what happens if the Pause key on the remote control is pressed during live tv (thanks to Timo Eskola). - Added a note about cFont::GetFont() not being thread-safe. - Fixed generating PAT/PMT version numbers in case the PIDs change during recording (reported by Reinhard Nissl). - Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk). - Fixed a memory leak when reaching the end of a recording during replay (reported by Reinhard Nissl). - Fixed calling close(-1) in cUnbufferedFile::Close() (reported by Reinhard Nissl). - Added a workaround for the broken linux-dvb driver header files (based on a patch from Tobias Grimm). - Fixed handling the length of DiSEqC command sequences (reported by Reinhard Nissl). - Fixed cOsdMenu::Display() in case the menu size has changed (thanks to Reinhard Nissl). - Added some missing 'const' keywords to avoid compilation errors with gcc 4.4 (thanks to Ville Skyttä and Ludwig Nussel). - Modified cSVDRP::CmdGRAB() to avoid writing into const data (reported by Ludwig Nussel). - Fixed calculating menu colum widths in case the font has a size other than the default size (reported by Reinhard Nissl). - Added a plausibility check for the OSD percentage parameters to avoid problems in case the values are stored in the setup.conf file in a wrong way. - Fixed variable types in cIndexFile (reported by Udo Richter).	2009-06-14 13:49:00 +02:00
Klaus Schmidinger	733a2becc4	Version 1.7.6 ... - cDevice::PlayTs() now syncs on the TS packet sync bytes. - Made MAXFRAMESIZE a multiple of TS_SIZE to avoid breaking up TS packets. - No longer resetting the patPmtParser in cDevice::PlayTs(), because this caused the selected audio and subtitle tracks to fall back to the default. - The SVDRP command PUTE now supports reading the EPG data from a given file (thanks to Helmut Auer). - Added cThread::SetIOPriority() and using it in cRemoveDeletedRecordingsThread (thanks to Rolf Ahrenberg). - Fixed the MEGABYTE() macro to make it correctly handle parameters resulting in values larger than 2GB. - Added cDevice::NumProvidedSystems() to PLUGINS.html (was missing since it had been implemented). - Fixed distortions when switching to the next file during replay. - Fixed detecting the frame rate for streams with PTS distances of 1800, which apparently split one frame over two payload units. - Added missing 'const' to cRecording::FramesPerSecond() (thanks to Joachim Wilke). - Any TS packets in the first "frame" after a cut in an edited recording that don't belong to a payload unit that started in that frame now get their TEI flag set, so that a decoder will ignore them together with any PES data collected for that PID so far (thanks to Oliver Endriss for reporting chirping sound disturbences at editing points in TS recordings). - cDvbPlayer::Empty() subtracts 1 from readIndex, because Action() will first increment it. - Only storing non-zero Pts values in ptsIndex. - Added a note to the INSTALL file about using subdirectories to split a large disk into separate areas for VDR's video data and other stuff (suggested by Udo Richter).	2009-04-26 12:19:00 +02:00
Klaus Schmidinger	1aadb31fb3	Version 1.7.5 ... - Fixed a hangup when replaying a TS recording with subtitles activated (reported by Timo Helkio). - Fixed handling the 'new' indicator in the recordings menu for TS recordings (thanks to Derek Kelly). - Added cap_sys_nice to the capabilities that are not dropped (thanks to Rolf Ahrenberg). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Added cRecordingInfo::GetEvent() (thanks to Marcel Unbehaun). - Improved synchronizing the progress display, trick modes and subtitle display to the actual audio/video. This now works independent of any buffer sizes the output device might use. + The cBackTrace class has been replaced with cPtsIndex, which keeps track of the PTS timestamps of recently played frames. + cDevice::GetSTC() is now required to deliver the STC even in trick modes. It is sufficient if it returns the PTS of the most recently presented audio/video frame. + The full-featured DVB cards need an improved firmware in order to return proper STC values in trick modes (thanks to Oliver Endriss for enhancing the av7110 firmware). - Adapted cFrameDetector::Analyze() to HD NTSC broadcasts that split frames over several payload units (thanks to Derek Kelly for reporting this and helping in testing). - Modified cFrameDetector::Analyze() to make it process whole frames at once, so that file I/O overhead is minimized during recording (reported by Günter Niedermeier). - Added command line help for the '-i' option. - Fixed cDvbPlayer::NextFile() to handle files larger than 2GB (thanks to Jose Alberto Reguero). - Improved replay at the begin and end of a recording. The very first and very last frame is now sent to the output device repeatedly until GetSTC() reports that it has been played. cDvbPlayer::Action() no longer calls DeviceFlush() (thanks to Reinhard Nissl for making sure vdr-xine no longer needs this). - Added missing '[]' to the delete operator in cMenuEditStrItem::~cMenuEditStrItem(). - Added missing virtual destructor to cPalette. - Now freeing configDirectory before setting it to a new value in cPlugin::SetConfigDirectory(). - Fixed a crash when jumping to an editing mark in an audio recording. - Fixed the 'VideoOnly' condition in the PlayPes() and PlayTs() calls in cDvbPlayer::Action() (thanks to Reinhard Nissl). - cDevice::PlayTs() now plays as many TS packets as possible in one call. - Making sure any floating point numbers written use a decimal point (thanks to Oliver Endriss for pointing out a problem with the F record in the info file of a recording). - Fixed detecting the frame rate for radio recordings. - Added missing AUDIO_PAUSE/AUDIO_CONTINUE calls to cDvbDevice (thanks to Oliver Endriss). - No longer writing the video type into channels.conf if VPID is 0 (thanks to Oliver Endriss for reporting this). - Improved efficiency of cEIT::cEIT() (thanks to Tobias Bratfisch).	2009-04-12 11:39:00 +02:00
Klaus Schmidinger	084e16c057	Version 1.7.4 ... - Removed the '#define FE_CAN_2ND_GEN_MODULATION', since it was wrong and the flag is now in the driver, anyway. - The full-featured DVB cards are now given the TS data directly for replay (thanks to Oliver Endriss for enhancing the av7110 driver to make it replay TS data). The patch from ftp://ftp.cadsoft.de/vdr/Developer/av7110_ts_replay__1.diff implements this change in the driver. The patch av7110_v4ldvb_api5_audiobuf_test_1.diff mentioned in version 1.7.2 is still necessary to avoid audio and video glitches on some channels. - Added a typecast in cUnbufferedFile::Write() to avoid an error message when compiling on 64 bit systems. - Added some missing 'const' statements to cBitmap (thanks to Andreas Regel). - Fixed returning complete PES packets in cTsToPes::GetPes() (thanks to Reinhard Nissl). - Added a missing Detach() in cTransfer::Activate() (thanks to Marco Schl��ler). - Added clearing the TS buffers in cDevice::Detach() (thanks to Marco Schl��ler). - Fixed incrementing the continuity counter in cPatPmtGenerator::GetPmt() (thanks to Johann Friedrichs). - Fixed removing deleted recordings in case there is a problem. Once a recording caused a problem with removing, no others were removed any more and an ongoing recording could fill up the disk and cause other recordings to be deleted automatically (reported by Reinhard Nissl). - Added "DEFINES += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE" to Make.config.template (thanks to Johann Friedrichs for pointing this out). Plugin authors should add this line to their Makefile or Make.config if they use file access functions that need special versions for 64 bit offsets. - The new command line option -i can be used to set an "instance id", which will be used to distinguish recordings of the same broadcast made by different instances of VDR (suggested by Frank Schmirler). This replaces the use of the "resume id" that was introduced in version 1.7.3. - Added checking mutexCurrentAudioTrack to cDevice::PlayTs() (thanks to Reinhard Nissl for pointing this out). - Fixed handling the pointer field in cPatPmtParser::ParsePmt() (thanks to Frank Schmirler - sorry I swapped two lines when adopting the original patch). - Checking the remaining packet length after processing the pointer field in cPatPmtParser::ParsePat() and cPatPmtParser::ParsePmt() (suggested by Frank Schmirler). - Checking the pointer field in cPatPmtParser::ParsePmt() only in 'payload start' packets (suggested by Frank Schmirler). - Changed cPatPmtGenerator to make sure the PMT pid doesn't collide with any of the actual pids of the channel. - Fixed cDevice::PlayTsAudio() and made cDevice::PlayTsVideo() return 0 if PlayVideo() didn't play anything. - Added an 'int' typecast to calculations involving FramesPerSecond() to avoid compiler warnings (reported by Winfried Koehler). - Fixed detecting frames for pure audio recordings. - Fixed editing PES recordings. The frame type in the index.vdr file generated for the edited PES recording is set to 1 for I-frames and 2 for all others (P- and B-frames). The exact frame type doesn't matter for VDR, it only needs to know if it's an I-frame or not. - The PAT/PMT is now only processed if its version changes (reported by Reinhard Nissl). - Fixed handling the maximum video file size (reported by Udo Richter). - Improved fast-forward/-rewind for audio recordings. The actual data is now sent to the output device, so that it can be replayed and thus cause the proper delay. For pure audio recordings the audio is no longer muted in fast-forward/-rewind mode, so that some orientation regarding the position within the recording is possible. There may still be some offset in the replay position displayed by the progress indicator when switching from fast-forward/-rewind to play mode, as well as in the current position during normal play mode. This is due to the various buffers between the player and the output device and will be addressed later. Note the new function cDevice::IsPlayingVideo(), which is used to inform the player whether there is video data in the currently replayed stream. If a derived cDevice class reimplements PlayTs() or PlayPes(), it also needs to make sure this new function works as expected.	2009-01-25 13:13:00 +01:00
Klaus Schmidinger	c296647594	Version 1.7.3 ... - Updated the Russian OSD texts (thanks to Oleg Roitburd). - Fixed handling the 'pointer field' in generating and parsing PAT/PMT (thanks to Frank Schmirler). - Fixed handling modulation types for DVB-S transponders when processing the NIT. - Changed cDvbDevice::GrabImage() to use V4L2 (thanks to Marco Schl��ler). - Added a poll to cDvbDevice::PlayVideo() and cDvbDevice::PlayAudio() to avoid excessive CPU load (this is just a makeshift solution until the FF DVB cards can play TS directly). - The recording format is now Transport Stream. Existing recordings in PES format can still be replayed and edited, but new recordings are done in TS. All code for recording in PES has been removed. The following changes were made to switch to TS recording format: + The index file format has been changed to support file sizes of up to 1TB (previously 2GB), and up to 65535 separate files per recording (previously 255). + The recording file names are now of the form 00001.ts (previously 001.vdr). + The frame rate is now detected by looking at two subsequent PTS values. The "frame duration" (in multiples of 1/90000) is stored in the info.vdr file using the new tag F (thanks to Artur Skawina for helping to get the IndexToHMSF() calculation right). + Several functions now have an additional parameter FramesPerSecond. + Several functions now have an additional parameter IsPesRecording. + The functionality of cFileWriter was moved into cRecorder, and cRemux is now obsolete. This also avoids one level of data copying while recording. + cRemux, cRingBufferLinearPes, cTS2PES and all c*Repacker classes have been removed. + A PAT/PMT is inserted before every independent frame, so that no extra measures need to be taken when editing a recording. + The directory name for a recording has been changed from YYYY-MM-DD-hh[.:]mm.pr.lt.rec (pr=priority, lt=lifetime) to YYYY-MM-DD-hh.mm.ch-ri.rec (ch=channel, ri=resumeId). Priority and Lifetime are now stored in the info.vdr file with the new tags P and L (if no such file exists, the maximum values are assumed by default, which avoids inadvertently deleting a recording if disk space is low). No longer storing Priority and Lifetime in the directory name avoids starting a new recording if one of these is changed in the timer and the recording is re-started for some reason. Instead of Priority and Lifetime, the directory name now contains the channel number from which the recording was made, and the "resume id" of this instance of VDR. This avoids problems if several VDR instances record the same show on different channels, or even on the same channel. The '-' between channel number and resumeId prevents older versions of VDR from "seeing" these recordings, which makes sure they won't even try to replay them, or remove them in case the disk runs full. + The semantics of PlayTs*() have been changed. These functions are now required to return the given Length (which is TS_SIZE) if they have processed the TS packet. + The files "index", "info", "marks" and "resume" within a TS recording directory are now created without the ".vdr" extension. + The "resume" file is no longer a binary file, but contains tagged lines to be able to store additional information, like the selected audio or subtitle track. + cDevice::StillPicture() will now be called with either TS or PES data. + cDvbPlayer::Goto() no longer appends a "sequence end code" to the data. If the output device needs this, it has to take care of it by itself. - Fixed cPatPmtParser::ParsePmt() to reset vpid and vtype when switching from a video to an audio channel (thanks to Reinhard Nissl). - cDvbDevice now uses the FE_CAN_2G_MODULATION flag to determine whether a device can handle DVB-S2. The #define is still there to allow people with older drivers who don't need DVB-S2 to use this version without pathcing.	2009-01-06 20:31:53 +01:00
Klaus Schmidinger	771986b89f	Version 1.7.0 ... - Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto. Note that the channels.conf file now supports additional parameters, so you may want to make sure you have a backup of this file in case you need to go back to the previous version of VDR! - Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl). - Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard Nissl). - Improved logging system time changes to avoid problems on slow systems under heavy load (suggested by Helmut Auer). - Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf Ahrenberg). - Fixed initializing the timer's flags in the cTimer copy constructor (thanks to Andreas Mair). - Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald). - Increased the time between checking the CAM status to 500ms to avoid problems with some CAMs (reported by Arthur Konovalov).	2008-04-13 18:00:00 +02:00
Klaus Schmidinger	dbf38b7c68	Version 1.5.10 ... - Implemented handling DVB subtitles (thanks to Marco Schlüßler, and also to Pekka Virtanen for writing the subtitle plugin, which helped in implementing subtitle handling in VDR). - The new remote control key "Subtitles" can be used to bring up the list of available subtitles. - The new setup option "DVB/Subtitle languages" can be used to define the preferred languages for subtitles. - Fixed selecting the audio track when pressing Ok in the Audio menu (thanks to Marco Schlüßler). - Implemented display of DVB subtitles in live viewing mode. - Implemented subtitle track selection. - Implemented bitmap color reduction and shrinking to display subtitles even on devices that can't display the necessary number of colors. - Added compatibility mode for playback of recordings made with the subtitles plugin (with some help from Rolf Ahrenberg). - The new setup option "DVB/Subtitle offset" can be used to shift the location of the subtitles in the vertical direction. - The new setup options "DVB/Subtitle foreground/background transparency" define an additional level of transparency for the foreground and background color of subtitles. - Existing recordings made with the subtitle plugin can be given an 'X' record in their info.vdr file, so that subtitles can be automatically selected upon replay, according to the preferred language setup, as in X 3 03 ger deutsch (see vdr.5). Note that these entries need to be added in the proper sequence, so that they correspond with the actual track languages in the recording. - Now generating translation files without line numbers to avoid unnecessarily large diffs. Plugin authors may want to replace the -F option with --no-location in the xgettext and msgmerge calls in their Makefiles. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added a missing Channels.SetModified(true) call when deleting or moving a channel in the Channels menu (reported by Halim Sahin). - Fixed a missing '-' at the next to last line of SVDRP help texts (reported by Denis Knauf). - Added a missing SetVolumeDevice() call in cDevice::SetPrimaryDevice() (reported by Reinhard Nissl). - Fixed a crash when pressing Left while at the first character of a cMenuEditStrItem (thanks to Christian Wieninger). - Only creating a new cDvbOsdProvider in cDvbDevice::MakePrimaryDevice() if 'On' is true (i.e. this device is being made the primary device). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed handling reallocated memory in cCharSetConv::Convert() (reported by Udo Richter). - Fixed a new[]/delete mismatch in cMenuEditStrItem::LeaveEditMode() (thanks to Udo Richter). - Implemented sending all frames to devices that can handle them in fast forward trick speeds (thanks to Timo Eskola). - Updated the Hungarian language texts (thanks to Thomas Günther). - Fixed description of DeviceSetAvailableTrack() and cReceiver(), and added an example ~cMyReceiver() in PLUGINS.html (thanks to Marco Schlüßler). - Improved the description of where logging goes in the INSTALL file (thanks to Elias Luttinen). - Added a note about how to initiate internationalization support to the README.i18n file. The Makefile generated by the 'newplugin' script now has the 'i18n' target automatically create an initial 'po/pluginname.pot' file. Plugin authors may want to add the '$(I18Npot)' dependency to the 'i18n' target in their Makefiles, as in i18n: $(I18Npot) $(I18Nmo) (based on a suggestion by Torsten Kunkel). - Removed a duplicate ',' from the ca_ES.po file (thanks to Thomas Günther). - Added the 'ß' character to the "allowed characters" in the de_DE.po file (suggested by Thomas Günther). - Made the default copy ctor of cRecording private (thanks to Markus Hahn). Same for the assign operator. - Added cRecording::Undelete() (based on a patch from Markus Hahn). - Added cDevice::CloseFilter() to allow a device to have complete control over both opening and closing section filters (thanks to Rolf Ahrenberg). - Some fixes to PLUGINS.html (thanks to Rolf Ahrenberg).	2007-10-14 18:00:00 +02:00
Klaus Schmidinger	b1e4da3be6	Version 1.5.4 ... - Increased APIVERSION (forgot to do that in 1.5.2 and 1.5.3). - Fixed a crash in i18n character set conversion (thanks to Alexander Riedel, Jose Alberto Reguero and Christian Wieninger for patches that cured part of the problem). - Adjusted the 'skincurses' plugin to UTF-8 handling. - Using nl_langinfo(CODESET) to determine the local codeset to use (thanks to Thomas Günther). The codeset names in 'libsi/si.c' have been changed to the canonical spelling with '-' (thanks to Ludwig Nussel for pointing this out). - Modified handling invalid characters in VFAT mode. - Replaced strn0cpy() with Utf8Strn0Cpy() where necessary. - Now using 'fontconfig' to determine which fonts to use (thanks to Anssi Hannula for code and hints on how to do this). - If no fonts are installed, VDR now uses a dummy font that doesn't actually draw any text, and logs an error message. - The new function cFont::CreateFont() can be used by plugins to create and use fonts of their own, independent of VDR's standard fonts. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Changed the parameter "OSD font" to "Default font" in "Setup/OSD" (suggested by Rolf Ahrenberg). - Fixed handling detached processes in SystemExec() (thanks to Udo Richter). - The info.vdr file now also stores the name of the channel, and the new function cRecordingInfo::ChannelName() returns this information if available (based on a patch from Alexander Hans). - The new function cOsd::SetOsdPosition() can be used to dynamically change the position and size of the OSD (based on a request from Christoph Haubrich). Plugins that implement skins should no longer use Setup.OSDWidth etc. directly, but should rather use cOsd::OsdWidth() etc. instead. Currently a change to the OSD position will only apply to newly opened OSDs.	2007-06-17 18:00:00 +02:00
Klaus Schmidinger	287cd613a1	Version 1.4.4-1 ... - Some improvements to the man pages (thanks to Ville Skyttä). - Fixed a possible segfault in cSkins::Message() (thanks to Udo Richter). - Made the getskyepg.pl script of the 'sky' plugin send a user agent message to the server, according to the rules at http://bleb.org/tv/data/listings. If your version of 'wget' doesn't support the -U option to set the user agent, use the new option -U of getskyepg.pl to have the information added to the URL as a query string. - The getskyepg.pl script now replaces "&amp;" with "&". - Fixed a possible crash in remux.c on 64-bit machines (thanks to Reinhard Nissl). - Fixed a typo in the change to the "Use small font" setup option in version 1.3.47 in the HISTORY and CONTRIBUTORS file (reported by Andreas Brugger). - Added a missing 'const' to cRecordingInfo::ChannelID() (reported by Andreas Brugger). This required the APIVERSION to be increased, so plugins will have to be recompiled. - Now calling cPluginManager::Active() only if VDR is really trying to shut down, and waiting for 5 minutes before calling it again (thanks to Jörg Wendel for reporting that cPlugin::Active() was called too often, and to Udo Richter for some hints on how to improve this). - Replaced 'unsigned long' with 'uint32_t' and 'uint64' with 'uint64_t' to avoid problems on 64-bit machines.	2006-12-03 18:00:00 +01:00
Klaus Schmidinger	33f1491b18	Version 1.4.1-3 ... - Fixed assigning schedules to channels in case there is no initial EPG information (thanks to Frank Schmirler). - Increased the APIVERSION to allow plugins that relied on the cStatus::MsgSetVolume() bug to react properly (suggested by Stefan Huelswitt). - Fixed cDevice::ToggleMute() (thanks to Christoph Haubrich). - Fixed deleting the last character of a string menu item in insert mode (thanks to Udo Richter). - The /video/.update file is now touched _after_ an editing process is finished in order to avoid excessive disk access (thanks to Artur Skawina). - Fixed handling the running status of EPG events before the currently running one, in case they are added after the current event (cont'd from version 1.4.1-2). - Modified the shutdown mechanism, so that the shutdown script is never given a time in the past (reported by Helmut Auer). If a timer is currently recording, or a recording would start within the next 30 minutes (default for the "Min. event timeout" setup parameter), and the user insists in shutting down now, the reboot time given to the shutdown script will correspond to a time that is "Min. event timeout" minutes (default is 30) in the future. - Avoiding shutdown message "Recording in ... minutes, shut down anyway?" with a negative number of minutes (reported by Udo Richter). - Fixed getting the next active timer when shutting down (thanks to Udo Richter). - Modified the cSVDRP::Close() function to avoid code duplication.	2006-08-06 18:00:00 +02:00
Klaus Schmidinger	396d0ad367	Version 1.3.46 ... - Fixed handling broken PMT records (thanks to Marcel Wiesweg for pointing out how to detect these). - Added a missing "Button$" for the Timer button and "Key$" in skinclassic.c (thanks to Rolf Ahrenberg). - Fixed broken entry 'A111.1W' in sources.conf (reported by Luca Olivetti). - Replaced the obsolete entry 'S21.5E' in the default 'diseqc.conf' with 'S13.0E' (reported by Ville Skyttä). - Fixed learning keys when VDR is already running (thanks to Jurij Retzlaff). - Fixed handling the system time transponder setting in the Setup/EPG menu, which was broken by the min/max fix in cMenuEditIntItem. - VPS timers now record only events that have exactly the given start time. This fix also implements recording several subsequent events that have the same VPS time (like a sports event with intermittent news breaks). - When checking for timers that have entered the "VPS margin", any free devices are now used to switch to the needed transponder. This improves cases where more than one VPS timer is about to start. - Fixed handling the VPS margin in case the event's duration is shorter than the margin. - Fixed handling VPS timers in case the primary device needs to switch to the timer's transponder. - Now avoiding the 'actual' device when starting a recording, so that a Transfer Mode for live tv isn't interrupted. - Fixed a typo in skins.h (thanks to Alexander Rieger). - cSkins::QueueMessage() called from a background thread with an empty message now clears all messages that have been previously queued by that thread and have not yet beed displayed (thanks to Alexander Rieger). - Fixed handling the color button texts when switching from the 'Schedule' menu of a channel without EPG info to the 'What's on now' menu (reported by Rolf Ahrenberg). - cMenuEditIntItem and cMenuEditChanItem can now be given strings to label the minimum and maximum values, and the case that no channel has been selected, respectively. - The initial channel and volume can now be defined in the "Setup/Miscellaneous" menu (based on a patch from Thomas Keil). - When hitting the end of a recording in fast forward mode, VDR no longer switches back to normal speed if the recording is already finished (thanks to Reinhard Nissl). - No longer calling cPlugin::ProcessArgs() if VDR is run with the --help or --version option, to avoid error messages from plugins (reported by Udo Richter). - Now checking whether there is any text before calling cStatus::MsgOsdTextItem() (reported by Joachim Wilke).	2006-04-09 18:00:00 +02:00
Klaus Schmidinger	9d12ac30f0	Version 1.3.44 ... - Fixed setting the audio language codes in 'Transfer-Mode' (reported by Rolf Ahrenberg). The actual problem was the call to the Transferring() function in cDevice::AttachPlayer() before assigning the player. - Fixed removing the '-' when entering a channel number where there is no other one that fits the input (thanks to Joachim Wilke). - Fixed the 'libsi' function CharArray::checkSize(), which made a previous workaround in libsi/descriptor.c obsolete (thanks to Marcel Wiesweg). - The "Ok" key in the "Jump" mode of the replay progress display now confirms the jump instead of closing the display (thanks to Christoph Haubrich). - The 'summary' field of a timer definition has been renamed to 'aux', and is now only used for external applications to store auxiliary information with a timer, which has no meaning whatsoever to VDR itself. The contents of the 'aux' field of a timer is copied into the recording's 'info.vdr' file, using the tag character '@'. - The description of a recording is now taken exclusively from its related EPG data. If an application wants to use a different description it needs to set it with SVDRP/PUTE and use table ID 0x00, so that it won't be overwritten (as a side effect, however, this also disables VPS for such an event). - There is no more "Summary" menu when pressing "Ok" in the "Timers" menu. The "Ok" key now always opens the "Edit timer" menu. - The upper 16 bit of a timer's "flags" are no longer treated specially when a timer is modified in the "Edit timer" menu. If an external application needs to know if a timer was modified, it has to keep a copy of the timer's data and compare that to the actual data. - The new function cRecordingInfo::ChannelID() can be used to retrieve the ID of the channel a recording was made from. - The 'info.vdr' file of a recording now also contains the 'E' and 'V' records of the EPG event used when creating it. - The option "Setup/OSD/Sort timers" has been removed. Timers are always sorted by their start time and priority. - The "Blue" key in the "Timers" menu now displays the EPG info of the event the selected timer will record (if available). The "On/Off" function has been shifted to the "Red" button. Editing a timer is done by pressing "Ok". - When determining which event a timer is going to record, all available events in the future are now taken into account (no more limit to 4 hours in the future). This has been done so that the event info is available in the "Timers" menu when pressing the "Blue" button. In order to avoid unnecessary work, each timer now has its own timestamp to control whether its schedule has changed since the last time its event has been set. - Fixed setting events to timers in case a non-VPS event has expired. - There is now a log message "timer ... set to event ..." when defining a timer from the EPG menu. - Lines tagged with '#' in the 'info.vdr' file of a recording are now silently ignored when reading that file (suggested by Peter Bieringer). Such lines can be used by external tools to store arbitrary information. - The 'event id' in EPG data has been extended to 32 bit, so that external tools can generate ids that don't collide with those from the DVB data stream (suggested by Matthias Schniedermeyer). - The DrawBitmap() function now has a new parameter 'Overlay' that allows a bitmap to be drawn with a transparent background (thanks to Alexander Hans). - Fixed cSchedule::GetFollowingEvent() in case there is currently no present event running (thanks to Pekka Mauno).	2006-02-26 18:00:00 +01:00
Klaus Schmidinger	b9bfba20f2	Version 1.3.43 ... - Removed an unnecessary toFile->SetReadAhead() from cutter.c (thanks to Artur Skawina). - The "Back" key now restores the original string when pressed while editing a string item (suggested by Markus Hahn). - Now stopping scanning the video directory if there are too many levels of symbolic links, which might indicate a recursive link loop (based on a patch from Helmut Auer). - Improved OSD area handling in cDvbSpuDecoder (thanks to Marco Schlüßler). - Now logging the description (if present) in case a thread is canceled (suggested by Marco Schlüßler). - cMenuText now uses the given font (thanks to Rolf Ahrenberg). - The ST:TNG skin now uses the fixed font if requested when displaying texts. - Fixed some typos in the CONTRIBUTORS file (thanks to Frank Krömmelbein). - Changed offset and size handling in 'libsi' from 'unsigned' to 'signed', so that overflows can be better detected (thanks to Marcel Wiesweg). - Checking data size in CaDescriptor::Parse() and LinkageDescriptor::Parse() of 'libsi' to avoid crashes with invalid data (thanks to Marcel Wiesweg). - Made CharArray::DataOwnData::assign() in 'libsi' more robust against invalid data (suggested by Oliver Endriss). Also changed CharArray::DataOwnData::Delete() so that it sets 'size' and 'data' to 0. - Now resetting the channel number if the number entered through the numeric keys exceeds the maximum channel number (thanks to Rolf Ahrenberg). - The language code in the 'X' component records of EPG data can now consist of two codes, separated by '+'. - If a recording starts and there is no EPG data available for the recorded channel, the 'X' audio component records for the 'info.vdr' file are now generated from the channel's PID data. - Externally provided EPG data (with table ID 0x00) now gets its component descriptors set from the broadcast data, so that language codes and descriptions are available (suggested by Andreas Brugger). - When setting the audio track descriptions, the language codes are now also set in case this is a replay session (based on a patch from Rolf Ahrenberg). - If a recording starts and the channel's audio PID data has more language code information than the EPG's component data, the code from the channel is taken. - Fixed handling DPID when deciding whether to switch to 'Transfer Mode' (thanks to Marco Schlüßler). - Fixed replaying recordings of radio channels with many audio tracks (thanks to Reinhard Nissl). - Added a comment to tChannelID::nid, explaining that is is actually the "original" network id.	2006-02-19 18:00:00 +01:00
Klaus Schmidinger	446b0e8e0b	Version 1.3.40 ... - Fixed a second place where a message should be given when an instant recording is started (reported by Jesus Bravo Alvarez). - Modified logging so that even on NPTL systems each line in the log file shows the individual thread's pid (based on a suggestion from Francois-Xavier Kowalski). - Fixed a problem with @plugin in keymacros.conf in case the named plugin is not loaded (reported by Franz Gangkofer). - Fixed a crash after executing the SVDRP command CLRE, caused by dangling 'schedule' pointers from cChannel objects (reported by Malte Schröder). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Improved NULL checking in strreplace(). - Fixed a crash in the Schedule menu with events that have no title (reported by Rolf Ahrenberg). cEvent::FixEpgBugs() now assigns a "No title" string to events that have no title. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Recordings are now only started if there is at least 300MB free disk space (suggested by Markus Hahn). - When entering text via the numeric keys, the cursor now automatically advances (based on a patch from Rolf Ahrenberg). - Updated the Polish OSD texts and the fontosd-iso8859-2.c file (thanks to Jaroslaw Swierczynski). - Disabled the "buffer reserve" in Transfer Mode. Last chance to complain if you really need it - it will be completely removed in the next version. If you are experiencing problems with a/v running out of sync, try the latest driver and firmware (if you are using a full featured DVB card). - Switching channels with the Up/Down or Channel+/Channel- keys now works a lot faster when the repeat function kicks in, by not actually switching the channel every time, but rather only displaying the channel info and doing the final switch when the key is released. - The channel display is now updated _before_ the channel is switched. - Added a missing initialization of 'timeout' in the cDisplayChannel constructor. - Fixed detecting if there can be any useful further input when entering channel numbers (thanks to Thomas Bergwinkl). - Updated the Spanish OSD texts (thanks to Jesus Bravo Alvarez). - Fixed handling the '0' key for switching between the last two channels (thanks to Thomas Bergwinkl).	2006-01-22 18:00:00 +01:00
Klaus Schmidinger	da948a50d2	Version 1.3.38 ... - Fixed handling second audio and Dolby Digital PIDs for encrypted channels (was broken in version 1.3.37). - Improved TS/PES conversion to better handle lost TS packets (thanks to Reinhard Nissl). - Limited the frequency of log messages from the cRepackers. - Now using the gettid() syscall to get a thread's pid, so that we get a useful value on NPTL systems (suggested by Johannes Stezenbach). - Fixed the RCU remote control handling to avoid problems with NPTL (thanks to Andreas Share for reporting a lockup with the RCU on NPTL systems). - When displaying the amount of free disk space, the space consumed by recordings that have been "deleted" but not yet actually "removed" is now taken into account (suggested by Christian Vogt). - Now avoiding unnecessary disk access when checking if there are deleted recordings that need to be removed (reported by Carsten Koch). - Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now a deleted recording is retained at least DELETEDLIFETIME seconds before actually removing it. The value of DELETEDLIFETIME has been changed to 300. So after (possibly inadvertently) deleting a recording, there will be at least 5 minutes in which it can be recovered (unless a new recording immediately requires the disk space). The count starts again at 0 every time VDR is started. - Fixed a possible crash when displaying the "Low disk space!" message from a background thread (thanks to Christof Steininger). - Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler). - Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground and background threads won't interfere. - The main menu now dynamically updates its contents in case an instant recording or replay stops, etc. - The version number of EPG events is now also stored in the epg.data file (thanks to Kendy Kutzner). - EPG events that are no longer in the currently broadcasted data stream are now automatically deleted. - Removed an invalid access to Event->schedule in cSchedule::DelEvent(). - Modified cSchedule::Cleanup() (events are always sorted by time). - Schedules are now cleaned up once every hour (not only at 05:00). - The "Schedule" and "What's on now/next?" menus are now updated if a timer is set or modified. - cTimer no longer has its own 'schedule' member, it rather uses that of the event it has been set to. - The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus now immediately creates a timer for the selected event and marks it with 'T'. If the event is already marked with 'T', the "Red" button opens the "Edit timer" menu for that timer. - Removing deleted recordings is now done in a separate thread. - Dropped the unused "stop recording on primary interface" stuff. - Converting a grabbed image to JPEG is now done with the new function RgbToJpeg() (see tools.h). - The SVDRP command GRAB now determines the image type (JPEG or PNM) from the extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit 'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but has no meaning any more. - The function cDevice::GrabImage() no longer writes the grabbed image to a file, but rather returns a pointer to the image in memory. The wrapper function cDevice::GrabImageFile() can be used to write the grabbed image directly to a file. Plugins that used the old version of cDevice::GrabImage() need to be adapted to the new interface. - The new class cBase64Encoder (see tools.h) can be used to encode data in base64 (thanks to Bob Withers for publishing his Base64 class). - The SVDRP command GRAB now writes the image data to the SVDRP connection (encoded in base64) if the given file name consists of only the file extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file name (based on a suggestion from Darren Salt). A simple way of viewing a grabbed image on a remote host is: svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display - - The new command line option '-g' must be given if the SVDRP command GRAB shall be allowed to write image files to disk. The parameter to this option must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if "-g- is given, grabbing to files is not allowed any more because of potential security risks. - Modified the way the SVDRP command GRAB writes the grabbed image to a file to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino Peña): + The file handle is now opened in a way that it won't follow symbolic links (suggested by Darren Salt). + The given file name is now canonicalized, so that it won't contain any ".." or symlinks (suggested by Darren Salt). + Grabbing to files is limited to the directory given in the the command line option '-g'. By default grabbing to files is not allowed any more. - Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos). - Changed all "illegal" to "invalid" in error messages (there's nothing "illegal" in VDR ;-). - When started as user 'root' VDR now switches to a lesser privileged user id, keeping the capability to set the system time (based on a patch from Ludwig Nussel). By default the user id 'vdr' is used, which can be changed through the new command line option '-u'. Note that for security reasons VDR will no longer run as user 'root' (unless you explicitly start it with '-u root', but this is not recommended!). The 'runvdr' script has been changed to use the '-u' option. - Changed the API of the functions cStatus::Recording() and cStatus::Replaying(), so that they can provide the full file name of the recording. Plugins that use these (or the related cStatus::Msg...() functions) need to be adapted (suggested by Andreas Brugger). - The DVB devices now retune (and, if applicable, resend the DiSEqC data) if the lock is lost (based on a patch from Reinhard Nissl). - Fixed handling multi byte key sequences in cKbdRemote (based on a patch from Jürgen Schneider). - Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco Schlüßler). - Made the static cControl functions thread safe (thanks to Patrick Fischer). - Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid warnings with g++ 4.1.0 (thanks to Ville Skyttä). - Fixed incrementing the 'state' variables in the repacker classes in remux.c to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä). - The Makefile now reports a summary of failed plugins (thanks to Udo Richter). - The cTimer constructor can now take an optional cChannel (suggested by Patrick Fischer). - Fixed setting the main thread id if VDR is running as a daemon. - Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl). - Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner). - Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger). - Now using FE_READ_STATUS to read the current frontend status (suggested by Holger Wächtler). - The "Menu" key now behaves consistently. If there is anything on the OSD, it is closed when the "Menu" key is pressed, and if there is nothing on the OSD, the "Menu" key opens the main menu (suggested by Luca Olivetti). - The new option "Setup/OSD/Timeout requested channel info" can be used to turn off the automatic timeout of the channel display in case it was invoked by a press of the "Ok" key (suggested by Thiemo Gehrke). - A message is now given when an instant recording is started (suggested by Helmut Auer). Actually the code was already there, just commented out - don't remember why it wasn't active... - Removed an obsolete "Summary" text from i18n.c and preceded all key definition texts with "Key$" to avoid duplicates (reported by Lucian Muresan). - Preceded all button texts with "Button$". - Removed obsolete "Eject", "Language" and "scanning recordings..." texts. - Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill). - Disabled the use of "fadvise" in cUnbufferedFile because there have been several reports that it causes more problems than it solves (suggested by Petri Hintukainen). If you want to use "fadvise", you can activate the line //#define USE_FADVISE in tools.c. - Removed unused 'offset' member from cOsdItem. - In the "Channels" menu the numeric keys now position the cursor to the channel with the given number (see MANUAL, section "Remote Control Keys", note (3) for details). - The "Mark/Move" function in the "Channels" menu now also works in the non-numeric sort modes. - The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if this is a menu. - The new "Info" key brings up information on the currently viewed programme or recording. For a live programme this is the same as "Schedule/Ok", i.e. the description of the current EPG event. For a recording this is the same as shown by the "Info" button in the "Recordings" menu. Plugins that implement players can overwrite their cControl::GetInfo() function to show their own info (see PLUGINS.html for details). Pressing the "Info" key again while the info is displayed will close the OSD. In order to assign this new key to an existing remote control setup, the remote.conf file needs to be deleted and VDR has to be restarted to go through the process of learning the remote control keys. - Any cReceivers still attached to a cDevice when that device switches to a different transponder are now automatically detached (suggested by Patrick Fischer). - The "flags" of a timer are now handled as an unsigned integer value. In order to do this, the interface of cMenuEditBitItem also had to be changed. - In string entry fields (like, e.g., the file name of a recording) the characters can now be entered by pressing the numeric keys, the same way as on a telephone keypad (based on the "Easy Input" patch from Marcel Schaeben). - Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch from "single shot" to "weekly", followed by the "Right" key (reported by Andreas Böttger). - The file 'ca.conf' is obsolete and has been removed. - Revised all descriptions regarding CICAM. - Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling. - Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack() (thanks to Reinhard Nissl). - Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo Schneider). - Cleaned up some trailing white space.	2006-01-08 18:00:00 +01:00
Klaus Schmidinger	99e3c093f4	Version 1.3.35 ... - Updated 'sources.conf' (thanks to Philip Prindeville). - Now using daemon() instead of fork() to run VDR in daemon mode (thanks to Enrico Scholz). - Fixed a possible endless loop in a menu with no selectable items if Setup.MenuScrollWrap is true (thanks to Enrico Scholz). - Making sure no item is displayed as "current" if Up, Down, Left or Right is pressed in a menu with no selectable items. - Added '__attribute__' to functions that use printf() like parameters (thanks to Darren Salt). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed a leftover 'summary.vdr' in vdr.1 (reported by Christoph Hermanns). - Added more error messages and line numbers when reading EPG data and info.vdr (thanks to Peter Bieringer). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Added missing mutex locks to cCiMenu::Abort() and cCiEnquiry::Abort() (reported by Marco Schlüßler). - Fixed lock handling in CAM communication to avoid problems with multiple CAMs per device or CAMs with more than one smart card. - Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos). - Updated the French OSD texts (thanks to Nicolas Huillard). - Fixed the cFilter example in PLUGINS.html (reported by Patrick Fischer). - The new class cUnbufferedFile is used for the recording files to avoid trashing the file system cache (based on a patch by Ralf Müller).	2005-10-31 18:00:00 +01:00
Klaus Schmidinger	88d8d63408	Version 1.3.34 ... - Fixed a leftover 'summary.vdr' in vdr.5 (thanks to Peter Bieringer for reporting this one). - Fixed opening recording folders in case the last replayed recording no longer exists (reported by Udo Richter). - Fixed an unjustified "Error while accessing recording!" after deleting a recording from a subfolder. - Fixed handling the '.update' file in case the video directory is not at the default location (reported by Jon Burgess). - Fixed a crash in cConfig::Load() when compiling on the PPC (thanks to Sascha Volkenandt). - Fixed the FATALERRNO macro to check for a non-zero errno value (reported by Marco Schlüßler). - Added a check against MAXOSDAREAS in cOsd::CanHandleAreas() (reported by Udo Richter). - Fixed setting current menu item if the first one is non-selectable. - cOsdItem::cOsdItem() now has a 'Selectable' parameter. - Improved displaying 'sub-title' and 'bottom text' in the CAM menu. - Added status message "Resetting CAM..." for an immediate feedback when the CAM reset has been triggered. - The CAM menu now automatically updates itself in case of a progress display (as used, for instance, when updating the firmware via satellite). - Now skipping some funny characters sent by some CAMs at the beginning of strings. - The CAM menu is now completely closed when pressing the Menu key while inside a sub menu. - Reduced MAX_CONNECT_RETRIES in ci.c to 2 (waiting too long made the whole thing appear hanging). - Added status message "Opening CAM menu..." for an immediate feedback when the CAM menu has been requested. - Speeded up initial opening of the CAM menu. - Fixed handling of menus with no selectable items. - The character 0x8A in CAM menu strings is now mapped to a real newline. - The 'sub-title' and 'bottom text' in the CAM menu can now consist of several lines. - Improved the CAM enquiry menu.	2005-10-03 18:00:00 +02:00
Klaus Schmidinger	c16bbf7422	Version 1.3.33 ... - Fixed two errors in 'newplugin' (thanks to Alexander Rieger). - Fixed converting arbitrarily formatted summary.vdr files (thanks to Thomas Günther). - Fixed handling color buttons in cMenuEditStrItem (thanks to Alexander Rieger). - Added cChannel::LinkChannels() and cChannel::RefChannel() (suggested by Helmut Auer). Note that VDR itself doesn't actually use the linked channels, yet, so there is no guarantee that this really works under all circumstances. - Added a missing include statement to the 'sky' plugin (thanks to Alfred Zastrow for reporting this one). - Fixed handling key macros with keys after @plugin (thanks to Rolf Ahrenberg for reporting this one). - Fixed error handling in cCiTransportConnection::RecvTPDU() (thanks to Georg Acher for reporting this one). - Removed obsolete 'shift' code in device.[hc]. - The SVDRP command DELR no longer triggers a complete reload of the global Recordings list, but rather deletes that particular entry. - The list of recordings is now read in a separate thread, resulting in a faster startup if there are a great many of recordings, or the disk(s) have to spin up. If the Recordings menu is opened while the list of recordings is still being read, the menu will be updated accordingly. Plugins that access the global Recordings variable should lock the thread by putting something like cThreadLock RecordingsLock(&Recordings); into the respective code block. Thanks to Carsten Koch for his help in testing and debugging this. - The 'new' indicator in the Recordings menu is now kept up-to-date (thanks to Thomas Günther). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - The '.update' file in the video directory is now touched when a recording is added or deleted, so that other VDR instances can update their lists (thanks to Alexander Rieger). - Made the function ExchangeChars() public (suggested by Lucian Muresan).	2005-09-25 18:00:00 +02:00
Klaus Schmidinger	d5c85f5ff8	Version 1.3.32 ... - Added some missing braces in remux.c (thanks to Wayne Keer for reporting this one). - Removed unused MAINMENUENTRY from svdrpdemo.c (thanks to Udo Richter for reporting this one). - Fixed appending sequence end code in cDvbPlayer::Goto() (thanks to Reinhard Nissl). - Fixed syncing in cRepacker (thanks to Reinhard Nissl). - Now always using stream id 0xE0 for the video stream, to avoid problems with post processing tools that choke on different ids (suggested by Reinhard Nissl). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cDvbPlayer::SkipFrames() to properly handle radio recordings (thanks to Reinhard Nissl). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Made LIRC command parsing more robust (thanks to Ville Skyttä). - Introduced a separate 'plugins-install' target in the Makefile (thanks to Daniel Thompson). - Re-introduced the code that waits for a tuner lock in VDR/device.c, since apparently some users actually need it. It's not active by default, you'll have to define the WAIT_FOR_TUNER_LOCK macro in that file if you need it (suggested by Malcolm Caldwell). - Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up (thanks to Lauri Tischler). - Repeat keys are now ignored when waiting for a keypress to cancel an operation (thanks to Marko Mäkelä). - The main menu function of a plugin can now be activated through a key macro of the form "@plugin" even if that plugin doesn't have a main menu entry (using part of a patch by Hardy Flor, which originally implemented calling plugins from SVDRP). - The menu timeout handling is now done centrally in the main program loop. - Added missing help for the 'help' keyword in the SVDRP command PLUG. - The main menu function of a plugin can now be called programmatically through the static function cRemote::CallPlugin(). - The SVDRP command PLUG now has a new option 'main' which can be used to initiate a call to the main menu function of a plugin (using part of a patch by Hardy Flor). - The new command line option '--vfat' can be used to make VDR encode special characters in recording file names, even if it wasn't compiled with VFAT=1 (suggested by Peter Bieringer). The compile time option VFAT still exists and creates a VDR that always behaves as if it were called with '--vfat'. - Replaced the ':' delimiter between hour and minute in recording file names with a '.' under Linux, too. Existing recordings with ':' as delimiter will still work. - Implemented the SVDRP command MOVC (thanks to Andreas Brachold). - Added support for multiple audio language codes in ISO639LanguageDescriptors to 'libsi' (thanks to Marcel Wiesweg). - Changed the audio PID language codes to hold up to two 3 letter codes, separated by '+', to store separate languages broadcast in two channel audio mode. - If the preferred audio language is broadcast on a PID that has two different languages in the two stereo channels, the audio channel is now properly set when switching to such a channel (thanks to Mogens Elneff for his help in testing this). - Fixed some typos in MANUAL (thanks to Ville Skyttä). - Fixed the default value for "Setup/EPG bugfix level" (thanks to Ville Skyttä for reporting this one). - Fixed defining timers that only differ in the day of week (thanks to Patrick Rother for reporting this one). - Fixed converting summary.vdr files that would result in a very long 'short text' (thanks to Carsten Koch). - Implemented a hash for the channels to reduce the system load in the EIT scanning thread (based on a patch by Georg Acher).	2005-09-11 18:00:00 +02:00
Klaus Schmidinger	ddd1e13e53	Version 1.3.29 ... - Fixed a race condition in cTransfer (thanks to Klaus Heppenheimer for reporting this one). In doing so, the 'active' variables used by the actual derived cThread classes have been replaced by the cThread::Running() function. Plugin authors may want to check their derived cThread classes and replace any 'active' variables the same way as, for instance, done in transfer.c. - Fixed handling EPG data for time shifted events (thanks to Marco Schlüßler). - Increased the default value for 'Min. user inactivity' to 300 minutes (suggested by Helmut Auer). - Now storing the channel id in the info.vdr file even if there is no EPG info available (thanks to Andreas Brachold for reporting that there are empty info.vdr files created in that case). - Added some 'mkdir -p' to the Makefile's 'install' target (thanks to Wayne Keer). - Changed the title of the recording info menu (thanks to Rolf Ahrenberg). - Fixed handling the frame number display if '7' is pressed before the first editing mark, or '9' after the last one (thanks to Thomas Günther). - Now discarding any previous numerical input to switch channels if Up, Down, Channel+, Channel-, Left or Right is pressed (thanks to Wolfgang Rohdewald for reporting a problem with this). - Pressing Ok while entering a channel number now immediately switches to that channel, without waiting for further input. - Avoiding unnecessary OSD draw operations caused by the audio track description display in the ST:TNG skin's channel display (thanks to Oliver Endriss for reporting this). - Removed the VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES stuff from cDvbDevice::StillPicture(), since apparently the VIDEO_STILLPICTURE call works.	2005-08-15 18:00:00 +02:00
Klaus Schmidinger	f836711024	Version 1.3.25 ... - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Some cable providers don't mark short channel names according to the standard, but rather go their own way and use "name>short name". VDR now splits at this character for cable channels (thanks to Gerhard Steiner for reporting this one). - Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael Reinelt for reporting this one). - Made the Makefile patch friendlier (thanks to Ludwig Nussel). - Made cOsd::isOpen an integer counter to avoid problems with messages when a cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one). - Updated the Danish OSD texts (thanks to Mogens Elneff). - The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the information about a recording, in the same format as the events are stored in 'epg.data' (see man vdr(5) for details). Existing summary files can be converted to the new format by running the Perl script 'summary2info.pl', as in summary2info.pl /video (the parameter given has to be the video directory). If there is no 'info.vdr' file for a recording, an attempt is made to read a 'summary.vdr'. - The "Summary" button in the "Recordings" menu has been renamed to "Info", and the page it brings up now shows the recording's information, much like the EPG event page. Therefore it now no longer uses the skin's SetText() function, but rather the SetRecording() function. Skin plugins may need to adjust that function accordingly (see skinsttng.c, for instance). - The SVDRP command LSTR now lists the recording information in the same tagged format as the LSTE command lists the EPG data. - The audio track menu now contains track descriptions when replaying (provided such descriptions were available in the EPG data when the recording was made, and are stored in the info.vdr file). - Avoiding extra blanks at the end of names of instant recordings. - Removed converting byte order on big endian systems from cDvbOsd::Flush(), which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong. - Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler). - No longer saving the setup in case of a fatal error, to keep the volume level from being set to a wrong value (thanks to Marco Schlüßler). - Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp() is waiting (thanks to Marco Schlüßler). - The SVDRP command DELR no longer deletes recordings that are currently being written to by a timer (thanks to Sascha Volkenandt for pointing out this one). - Pressing the "Play" key in live viewing mode now resumes a previous replay session (thanks to Mirko Dölle). - Now dropping EPG events that have a zero start time or duration (thanks to Oliver Endriss). - No longer stopping Transfer Mode or replay immediately when the Power button is pressed (thanks to Rolf Ahrenberg). - Moved the NPTL and UTF-8 checks after the version and help output (thanks to Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system). - Made tChannelID::operator==() inline for better performance (thanks to Georg Acher). - Introduced cListBase::count for better performance (thanks to Georg Acher). - cEvent no longer stores the channelID directly, but rather has a pointer to the schedule it is in. - Now using hash tables to speed up cSchedule::GetEvent() (partially based on a patch from Georg Acher). - Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the '& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher). - Speeded up deleting duplicate channels. - Fixed listing recordings with empty episode names in the LSTR command (thanks to Stefan Huelswitt for pointing this out). - Added cThread::SetPriority() and using it in cSectionHandler::Action() to reduce the priority of the section handler threads (as suggested by Georg Acher).	2005-05-29 18:00:00 +02:00
Klaus Schmidinger	e36fe18c48	Version 1.3.19 ... - Making sure at least the default skin is available at program start in case a plugin needs to issue an error message (thanks to Achim Tuffentshammer for reporting a crash in such a case). Also checking if there is a current skin in cSkins::Message(). - Completed the Finnish OSD texts and fixed internationalization of the text for "Setup/DVB/Audio language(s)" (thanks to Rolf Ahrenberg). - Completed the Estonian OSD texts and switched to iso8859-13 character set (thanks to Arthur Konovalov). - Made cCondWait::SleepMs() sleep at least 3ms to avoid a possible busy wait. - Fixed canceling the LIRC thread (thanks to Marco Schlüßler for pointing out this one). - The "Green" button in the "Main" menu is now always "Audio", since the audio channel might be changed even if there is only one actual audio PID. - Fixed handling the '-E' option which was broken in version 1.3.18 (thanks to Christian Jacobsen for reporting this one). - Added 'channels.conf.terr' entries for Mainz (thanks to Michael Heyse). - Implemented cDolbyRepacker for better handling of Dolby Digital PES packets (thanks to Reinhard Nissl). - Fixed playing files with PES packets longer than 2048 byte through the full featured DVB card (thanks to Marco Kremer for reporting this one and providing a test sample). - Recording and Transfer Mode now handle more than 2 audio PIDs. For this the interfaces of the following functions have been changed: cTransferControl::cTransferControl() cTransfer::cTransfer() cRecorder::cRecorder() cReceiver::cReceiver() cRemux::cRemux() - Fixed a possible race condition in cDevice::Action() and cTSBuffer::Action() (thanks to Stefan Huelswitt). - Extended some buffer sizes to allow handling HDTV streams (thanks to Reinhard Nissl). - Added 'channels.conf.terr' entries for Düsseldorf and Köln (thanks to Walter Koch). - Falling back to 'stereo' when switching channels in case the user had switched to 'left' or 'right' (suggested by Rolf Groppe). - Completed the Danish OSD texts (thanks to Mogens Elneff). - Recording and Transfer Mode can now handle up to 8 Dolby Digital tracks (thanks to Marco Schlüßler for a patch that implements substream handling into cDevice::PlayPesPacket(), and Reinhard Nissl for adding substream handling to cDolbyRepacker). - Added PlayPes(NULL, 0) to cTransfer::Action() when clearing the transfer buffer to avoid overflows (thanks to Marco Schlüßler for pointing this out).	2005-01-23 18:00:00 +01:00
Klaus Schmidinger	fb5cccb2df	Version 1.3.18 ... - Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer for reporting this one). - Some more changes to the 'childTid' handling in cThread (based on suggestions by Stefan Huelswitt). - Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one). - Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still picture mode (thanks to Reinhard Nissl for reporting this one). - Fixed a possible race condition in generating the DVB device names (thanks to Rainer Zocholl for reporting this one). - Changed the way PES packets are played to allow replay of AC3 sound over the full featured DVB cards (partially based on a patch from Werner Fink). + The new function cDevice::PlayPes() is now called with the complete PES data stream and calls PlayVideo() and PlayAudio() as necessary. + cDevice::PlayVideo() is now only called with actual video PES packets. + cDevice::PlayAudio() is now called with the actual audio PES packets, which can be either "normal" audio or AC3 data. You need at least firmware version 0x261d to replay AC3 sound over a full featured DVB card. This function now has an 'int' return value. + PlayAudio() of derived cDevice classes shall no longer call the base class function. It shall just play the given data as audio. + cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been replaced with cPlayer::PlayPes(). + All StripAudioPackets() functions are now obsolete. The functionality has been moved into cDevice::PlayPes(), where only the video and audio packets that are actually required will be processed. + All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no longer care about audio tracks. cPlayer, however, still has the virtual hooks for audio track handling in order to allow plugins to implement players that have their own idea about this. + cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to allow access to all available PIDs. - Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for pointing this out). - Completed the Italian OSD texts (thanks to Sean Carlos). - Fixed setting 'synced' in cRemux when recording radio channels (thanks to Laurence Abbott). - Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel). - Fixed genfontfile.c (sometimes the character width was wrong, and the codes were shifted one too far to the left). - Fixed the character width and shifted the codes one to the right in all font files. - Renamed font???.c to font???-iso8859-1.c for symmetry. - Switched the character set to iso8859-15 for English, German and Finnish (thanks to Andreas Brugger for reporting the missing Euro sign in iso8859-1). - Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt). - Fixed a race condition in starting a thread (thanks to Reinhard Nissl for reporting this one). - Replaced non-threadsafe library functions with their threadsafe versions (thanks to Rainer Zocholl for pointing this out). - Other non-threadsafe functions have been replaced by threadsafe classes that hide the actual buffering. In particular these are: readdir() -> cReadDir readline() -> cReadLine - Several formerly non-threadsafe functions now have a return type of cString: cChannel::ToText() tChannelID::ToString() cEvent::GetDateString() cEvent::GetTimeString() cEvent::GetEndTimeString() cEvent::GetVpsString() cMark::ToText() cTimer::ToText() cSource::ToString() cTimer::PrintDay() cTimer::PrintFirstDay() PrefixVideoFileName() IndexToHMSF() ChannelString() strescape() AddDirectory() itoa() WeekDayName() DayDateTime() When using these functions in a 'const char *' context there is nothing special to consider, except that you can no longer have a pointer to the return value, as in const char *date = DayDateTime(); Although this will compile without error message, the resulting 'date' will not be valid after this line. Use this instead: cString date = DayDateTime(); In a 'const void *' context (as in printf() etc.) the result needs to be dereferenced with a '*', as in printf("%s", *DayDateTime()); to make it a 'const char *'. - Removed delay_ms(), using cCondWait::SleepMs() instead. - Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer Zocholl for pointing out this problem). - Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching receivers from different threads. - The new remote control button "Audio" can be used to switch between different audio tracks. The "Green" button in the "Main" menu has been changed from "Language" to "Audio", since it now also controls switching between normal and Dolby Digital audio tracks (see MANUAL for details). - The description of the audio tracks is now taken from the "component descriptors" that are broadcast in the EPG data. However (as no big surprise), not all channels actually provide useful data here, so there are now some additional EPG bugfixes, which can be activated by setting the "EPG bugfix level" to 3. - The format of the 'epg.data' files has been extended by the new tag 'X', which contains the stream components of an event (see man vdr(5) for details). - The cStatus class now has the new member function SetAudioTrack(), which can be used to get notified when the audio track has been switched, and the new member function SetAudioChannel() which is called when the audio channel is changed. - Skins need to implement the new cSkinDisplayTrack class to display the audio track menu. - The ST:TNG skin now displays the current audio track description (if any) at the botton left side. - The new setup option "DVB/Audio languages" can be used to control which audio language shall be selected in case a channel broadcasts in different languages (see MANUAL for details). - The "Left" and "Right" keys in the "Audio" menu can be used to switch between the left and right stereo channels in case there are different audio tracks in these channels (see MANUAL for details). - Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund). - Fixed the default quality value when grabbing a JPEG image (thanks to Patrick Gleichmann). - Fixed deleting a menu item in case the next item is not selectable (thanks to Dino Ravnic). - Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco Schlüßler). - The setup option "Recording/Record Dolby Digital" has been renamed and moved to "DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and whether an available DD audio track will appear in the "Audio" menu. - Added support for circular polarization (thanks to Jonan Santiago). - Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for their support in testing and fine tuning this version.	2005-01-09 18:00:00 +01:00
Klaus Schmidinger	3038be2a6a	Version 1.3.15 ... - Fixed some typos in the Makefile's 'font' target (thanks to Uwe Hanke). - Added more checks and polling when getting frontend events (based on a patch from Werner Fink). - No longer explicitly waiting for a tuner lock when switching channels (apparently setting "live" PIDs before the tuner is locked doesn't hurt). Moved the wait into cDevice::AttachReceiver() instead. - Immediately displaying the new channel info when switching channel groups. - Moved the main program loop variables further up to allow compilation with older compiler versions (thanks to Marco Schlüßler for reporting this one). - Now calling pthread_cond_broadcast() in the destructor of cCondWait and cCondVar to make sure any sleepers will wake up (suggested by Werner Fink). Also using pthread_cond_broadcast() instead of pthread_cond_signal() in cCondWait, in case there is more than one sleeper. - Making sure that timers and channels are only saved together, in a consistent manner (thanks to Mirko Dölle for reporting a problem with inconsistent channel and timer lists). - Now handling the channel name, short name and provider separately. cChannel therefore has two new functions, ShortName() and Provider(). ShortName() can be used to display a short version of the name (in case such a version is available). The optional boolean parameter of ShortName() can be set to true to make it return the name, if no short name is available. The sequence of 'name' and 'short name' in the channels.conf file has been swapped (see man vdr(5)). - Added the 'portal name' to cChannels (thanks to Marco Schlüßler). - Fixed handling key codes that start with 0x1B in the KBD remote control code. - Now using qsort() to sort cListBase lists. For this, the virtual function cListObject::operator<() has been replaced with cListObject::Compare(). Plugins that implement derived cListObject classes may need to adjust their code. - The "Channels" menu can now be sorted "by number" (default), "by name" and "by provider". While in the "Channels" menu, pressing the '0' key switches through these modes. - Fixed the buffer size in cRecording::SortName(). - Now displaying the name of the remote control for which the keys are being learned inside the menu to avoid overwriting the date/time in the 'classic' skin (thanks to Oliver Endriss for reporting this one).	2004-11-01 18:00:00 +01:00
Klaus Schmidinger	335a572913	Version 1.3.12 ... - Removed all error messages from cRecordings::ScanVideoDir() and just skipping entries that cause errors in order to avoid failure in case of things like broken links etc. - The function cTimers::SetEvents() now immediately returns if there is some user input. - Fixed handling menu status messages when the list contents is scrolled (thanks to Alfred Zastrow for reporting this one). - Fixed checking the last area for misalignment in cOsd::CanHandleAreas() (thanks to Reinhard Nissl for reporting this one). - No longer adding section filters to the list of filters if they can't be opened (thanks to Marco Schlüßler for pointing this out). - Fixed handling error case '-1' when polling section filters (thanks to Marco Schlüßler). - Fixed handling error case '-1' when polling CAM connections. - Making sure the OSD reports oeWrongAlignment errors before any oeAreasOverlap error (suggested by Reinhard Nissl). - Avoiding flashing effects in the OSD of full featured DVB cards by explicitly clearing the OSD windows before opening them (suggested by Marco Schlüßler). - Experimental support for NVOD channels. Currently these channels are detected and linked to their "base" channels using the same mechanisms as for the "linked services" (let's see if this is useful). Thanks to Mike parker for helping to test this. Also used some input from the 'autopid' patch by Andreas Schultz). - Now storing the name of the service provider (aka "bouquet") in the channel name, separated by a semicolon (see man vdr(5) for details). Explicit usage of the various parts of the channel name is yet to come. - The 'radio' channel icon is now only displayed in the ST:TNG skin if the channel actually has an APID.	2004-07-18 18:00:00 +02:00
Klaus Schmidinger	eb52e3004a	Version 1.3.11 ... - In order to avoid problems on NPTL systems, VDR now checks for the presence of NPTL at program start, and if it is, exits and tells the user to do 'export LD_ASSUME_KERNEL=2.4.1' before starting VDR. - Revisited the "Fixed missing audio after replaying a DVD" change because it introduced a sound disturbance when switching between channels on the same transponder (thanks to Marco Schlüßler). - In order to avoid problems on UTF-8 systems, VDR now checks for the presence of UTF-8 at program start, and if it is, exits and tells the user to turn off UTF-8 before starting VDR (thanks to Ludwig Nussel for pointing out a problem with systems that are set to use UTF-8). There are also problems in case the video partition is mounted with "iocharset=utf8" (thanks to Jörg Knitter for reporting this one). Please also read the "IMPORTANT NOTES" section in the INSTALL file! - Some changes to the SPU decoder interface (thanks to Sven Goethel). - Some improvements in cOsd creation (thanks to some suggestions by Jouni Karvo). - Fixed calculating the OSD width and height (thanks to Olaf Henkel for reporting a problem with long event texts in the "Classic VDR" skin). - Fixed switching channels while an encrypted channel is being recorded, because the channel was switched if the new channel was on the same transponder and was a radio channel or an unencrypted channel (thanks to Martin Dauskardt for reporting this one). - No longer using the external 'find' command to scan the video directory for recordings (based on a suggestion by Mirko Dölle). - The list of recordings is now kept statically in memory to avoid long delays when opening the "Recordings" menu. As a side effect, external modifications to the video directory are no longer immediately reflected in the "Recordings" menu. If a plugin manipulates the video directory in any way, it can call the function Recordings.TriggerUpdate() to trigger an update of the list of recordings. If some external tool manipulates the video directory, it can touch the file '.update' in the video directory to trigger an update of the list of recordings. - Fixed a memory leak in theme description handling (thanks to Sascha Volkenandt). - Added cDevice::Flush() to make sure that all data in the video card's buffers has been processed (thanks to Reinhard Nissl). Currently this is not yet actually implemented for FF DVB cards. - Fixed handling the color button texts in cMenuEditStrItem (thanks to Maynard Cedric for reporting this one). - Fixed the description of cRingBufferLinear (thanks to Ludwig Nussel for pointing out this one). - Fixed cRingBufferLinear::Get() in case the buffer wraps around (thanks to Ludwig Nussel for reporting this one).	2004-06-19 18:00:00 +02:00
Klaus Schmidinger	c80a53ff6e	Version 1.3.7 ... - Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess). - Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6. - Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg). - Fixed the help for LSTE and LSTR (was broken in 1.3.6). - Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos). - Added some 3-letter language codes (thanks to Marcus Mönnig). - Added language code handling to the subtitling descriptor in 'libsi' (thanks to Pekka Virtanen). - Moved several menu item classes from menu.c to menuitems.[hc] to make them available for plugins. - The epg2html.pl script now handles '|' in description texts. - The new setup option "OSD/Use small font" can be used to control the use of the small font (see MANUAL for details). - Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd. Plugins may need to adjust their #include statements. - Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the driver, together with the endian problem). - The new OSD setup parameters "Left" and "Top" can be used to define the top left corner of the OSD. - The OSD size parameters are now in pixel (as opposed to formerly characters). When reading a 'setup.conf' file from an older version of VDR, the OSDwidth and OSDheight values will be converted to pixel automatically. - The OSD is now fully device independent. See the comments in VDR/osd.h and the description in PLUGINS.html for information on how a plugin can implement an OSD display on arbitrary hardware. - The OSD (actually its cBitmap class) can now handle XPM files. There are several XPM files in the VDR/symbols directory which can be used by skins (some of these have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how to use these. - Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD has been dropped. There will be a plugin that implements a skin with this functionality later. - The entire OSD display can now be implemented via "skins". See VDR/skins.[hc], VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how a plugin can implement its own skin. By default VDR comes with a "Classic" skin that implements the OSD display known from previous versions, and the new skin named "ST:TNG Panels", which is also the default skin now. The actual skin can be selected through "Setup/OSD/Skin". - The colors used in a skin can now be configured using "themes". See PLUGINS.html for information on how a skin can make use of themes, and man vdr(5) for the structure of a theme file. The actual theme to use can be selected through "Setup/OSD/Theme". - Added Croatian language texts (thanks to Drazen Dupor). NOTE: there is apparently a problem with the newly introduced iso8859-2 font, because as soon as Setup/OSD/Language is set to Croatian (currently the last one in the list) everything freezes and the vdr processes have to be killed with -9 and the driver needs to be reloaded. Maybe somebody else can find out what's going wrong here... - Added missing NULL checks when accessing sectionHandler in device.c (thanks to Pekka Virtanen). - Fixed setting the time from the DVB data stream (thanks to Helmut Auer for pointing out a frequency/transponder handling mixup). This now also takes the actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and set the "Set system time" and "Use time from transponder" parameters accordingly (this is necessary even if you have already set them before!).	2004-05-16 18:00:00 +02:00
Klaus Schmidinger	162ed534b0	Version 1.2.6pre1 ... - Updated the required driver version in INSTALL (thanks to Jens Groth for reporting this one). - Fixed missing channel info after an incomplete channel group switch (thanks to Andreas Trauer). - Fixed handling a channels.conf that contains a ":@nnn" line as its last entry (thanks to Ralf Klueber). - Fixed detecting the /dev/videoN devices for GRAB in case there are others before the DVB devices (thanks to Andreas Kool). - Updated 'channels.conf.terr' for Berlin (thanks to Markus Hardt). - Fixed handling rc key learning in case cRemote::Initialize() returns 'false' (thanks to Oliver Endriss). - Fixed initializing the highlight area in cDvbSpuDecoder (thanks to Sven Goethel). - Now trying to get a timer's channel without RID when loading 'timers.conf' (thanks to Thomas Rausch). - Removed the unused 0x73 (TOT) filter in eit.c (thanks to Andreas Trauer). - Fixed extracting the ES data in cDvbDevice::StillPicture() (thanks to Stefan Huelswitt). - Added MPEG1 handling to cDvbDevice::StillPicture() (thanks to Thomas Heiligenmann). - Changed the default "Lifetime" to 99, which means that recordings will never be deleted automatically in case the disk runs full (suggested by Oliver Endriss). Note that in an existing VDR installation the current value as set in 'setup.conf' will still be used - this change only affects new VDR installations. - Edited recordings will now never be deleted automatically if the disk runs full (suggested by Emil Naepflein). - Channel IDs are now checked when reading 'channels.conf' to avoid later problems with timers.	2003-10-17 18:00:00 +02:00
Klaus Schmidinger	3feeb907f7	Version 1.2.5pre3 ... - Fixed dropping out of replay mode while viewing a recording that is still going on (thanks to Oliver Endriss for reporting and helping to debug this one). - Fixed handling ':' characters in channel names when reading channels.conf (thanks to Reinhard Nissl for reporting this one). - Fixed the URL to the 'Doxygen' tool in INSTALL (thanks to Dirk Essl). - Removed the obsolete chapter "Stopping a recording on the primary DVB interface" from MANUAL. - Completed Dutch language texts (thanks to Hans Dingemans). - Made 'diseqc.conf' a required file only if Setup.DiSEqC is activated (thanks to Thomas Schmidt). - VDR now starts up even if 'keymacros.conf' references a plugin that is currently not loaded (suggested by Alexander Wetzel). - Fixed checking for VIDEO_STREAM_S in cRemux::SetBrokenLink() (thanks to Oliver Endriss). - Added 'repeat' function to keys '7' and '9' ("jump to mark") in replay mode (suggested by Oliver Endriss). - Made cOsdMenu::Display() virtual, which allows plugins to do some additional processing after calling the base class function (suggested by Jan Rieger). - Updated 'ca.conf' (thanks to Marco Franceschetti).	2003-09-14 18:00:00 +02:00
Klaus Schmidinger	5f5dfd7f69	Version 1.2.3 (not officially released) ... - Fixed the TS to PES repacker so that it works with MPEG1 streams (thanks to Andreas Kool). - Fixed keeping track of the current channel number when moving channels in the "Channels" menu (thanks to Mirko Günther for reporting this one). - Made the plugin library directory configurable via Make.config (thanks to Ludwig Nussel). - Fixed scaling SPU bitmaps in Letterbox mode when playing NTSC material. In order to do this, the cDevice was given a new member function GetVideoSystem(). - Fixed two warnings when compiling with gcc 3.3.1 (thanks to Alfred Zastrow for reporting this). - Made crc32() a static function in libdtv/libsi/si_parser.c to avoid a name clash when using other libraries that also implement a function by that name (thanks to Reinhard Nissl for reporting this one). - Fixed staying off the end of an ongoing recording while replaying in time shift mode (thanks to Rainer Zocholl for reporting this one). - VDR now stops with exit status 2 if one of the configuration files can't be read correctly at program startup (suggested by Rainer Zocholl). - Fixed a crash when starting "Pause live video" twice within the same minute on the same channel. - Fixed freezing replay if a timer starts while in Transfer Mode from the device used by the timer, and the timer needs a different transponder (thanks to Richard Robson for reporting this one). - Fixed toggling channels with the '0' key (thanks to Mirko Günther for reporting this one). - Made the "Zap timeout" (the time until a channel counts as "previous" for switching with '0') a setup variable, available in "Setup/Miscellaneous" (suggested by Helmut Auer). - Removing deleted recordings faster than normal when cutting, to avoid running out of disk space (thanks to Manfred Schmidt-Voigt for reporting this one).	2003-08-17 18:00:00 +02:00
Klaus Schmidinger	57bd7eeed1	Version 1.1.14 ... - Fixed some faulty default parameter initializations (thanks to Robert Schiele). - Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner and Oliver Endriss). - Updated Finnish OSD texts (thanks to Jaakko Hyvätti). - Fixed a small glitch when switching channels (thanks to Dennis Noordsij for reporting this one). - Fixed handling multiple 'CaCaps' entries in 'setup.conf'. - Group separators in 'channels.conf' may now be given like ':@201 My Channels', where '@201' indicates the number to be given to the next channel. This can be used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR 'channels.conf' FILE! - Timers now internally have a pointer to their channel (this is necessary to handle gaps in channel numbers, and in preparation for unique channel ids). - Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one). - Added KI.KA to channels.conf.cable (thanks to Robert Schiele). - Frequency values for cable and terrestrial channels in 'channels.conf' can now be given either in MHz, kHz or Hz. The actual value given will be multiplied by 1000 until it is larger than 1000000. - Fixed skipping unavailable channels when zapping downwards. - Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt). - Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device (thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and helping to fix it). - Fixed channel switching in case of an active 'Transfer Mode' on the primary device ('Transfer Mode' is now launched with priority '-1'). - Fixed a ternary expression in dvbspu.c. - Fixed handling 'Transfer Mode' on single device systems when recording an encrypted channel (thanks to Stefan Huelswitt). - Fixed blocking replaying in case an encrypted channel is being recorded on the primary device. - Now the name of the remote control is displayed when learning the keys. - Fixed learning remote control keys in case there is more than one remote control (thanks to Oliver Endriss for reporting this one). - Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record", "FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports any of these keys you can delete your 'remote.conf' file and restart VDR to go through the key learning procedure again in order to assign these new keys. See MANUAL for more information. Authors of player plugins should update their ProcessKey() functions so that the new player keys have the same functionality as the "Up", "Down", "Left", "Right" and "Blue" keys, respectively. Note that the existing functionality of these keys should by all means be retained, since VDR (and any plugins) shall be fully usable with just the basic set of keys. These new keys are only for additional comfort in case the remote control in use supports them. - Implemented new keys to directly access the VDR main menu functions "Schedule", "Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote control provides keys you want to assign these functions to, you can delete your 'remote.cof' file and restart VDR to go through the key learning procedure again in order to assign these new keys. See MANUAL for more information. - The new configuration file 'keymacros.conf' can be used to assign macros to the color buttons in normal viewing mode, as well as to up to 9 user defined keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf' implements the functionality of the "color button patch". - Fixed a crash when learning the keys of several remote controls and pressing buttons of those that have already been learned (thanks to Oliver Endriss for reporting this one).	2002-10-27 17:00:00 +01:00
Klaus Schmidinger	54d069c95c	Version 1.1.4 ... - Added Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten). - Activated cutting. - Activated 'Transfer Mode'. - Moved handling of the Menu key entirely into vdr.c. - Switched VDR's own player to the new cPlayer/cControl structures. - Switched handling 'Transfer Mode' to the new cPlayer/cControl structures. - The following limitations apply to this version: + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet.	2002-06-23 18:00:00 +02:00
Klaus Schmidinger	f06d2c27fc	Version 1.1.3 ... - Improved the VDR Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(MAKE) to call recursive makes. - Changed the name of the 'package' target in the plugin Makefiles to 'dist' (following the suggestions in the "GNU Make" manual). If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Improved the plugin Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(shell...) to get the version numbers. If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Fixed some function headers to make them compile with gcc 3.x (thanks to Gregoire Favre). - Fixed the cutting mechanism to make it re-sync in case a frame is larger than the buffer (thanks to Sven Grothklags). - Added an error message if the directory specified in the '-L' option can't be accessed (suggested by Stefan Huelswitt). - Rearranged OSD class names to make 'cOsd' available for the main OSD interface. - Completely moved OSD handling out of the cDvbApi class, into the new cOsd. - Implemented cStatus to allow plugins to set up a status monitor. See PLUGINS.html for details. - Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c. - Added Swedish language texts (thanks to Tomas Prybil). - Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing out this one). - Removed compiler option '-m486' to make it work on non-Intel platforms. If you have already started a plugin project, you may want to make sure you remove this option from your existing Makefile. - Completely rearranged the recording and replay functions to make them available to plugins. - Replay is now done in a single thread (no more syncing between input and output thread necessary). - It is now possible to record several channels on the same transponder with "budget cards". VDR automatically attaches a recording timer to a card that already records on the appropriate transponder. How many parallel recordings can actually be done depends on the computer's performance. Currently any number of recordings gets attached to a card, so you should carefully plan your timers to not exceed the limit. On a K6-II/450 it was possible to record three channels from transponder 12480 with a single WinTV NOVA-S. - Timers that record two successive shows on the same channel may now overlap and will use the same DVB card. During the time where both timers record the data is simply saved to both files. - The following limitations apply to this version: + Transfer mode doesn't work yet. + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet. + Cutting doesn't work yet.	2002-06-16 18:00:00 +02:00
Klaus Schmidinger	ef0a53af72	Version 0.99pre5 ... - Updated channel settings for 'N24' (thanks to Andreas Gebel). - Fixed handling hierarchical recordings menu in case of directories starting with the same sequence of characters. - Fixed handling timers on the 29th, 30th or 31st of a month in case the next month has less than 31 days. - Added a description of the sort order of individual episodes in the recordings menu to the MANUAL. - Removed the EPG bugfix for "Title / Subtitle" cleanup. Apparently Pro-7 has finally stopped this nasty habit. - Added some EPG bugfix statistics (printed to the log file every time the EPG data is cleaned up and when VDR is terminated). Maybe somebody in charge of the EPG data at the listed channels will read this and take the necessary actions to fix these things... - Changed the [dei]syslog macros in tools.h to use a variable number of args, thus making it safe to use them in nested 'if/else' statements. - Fixed error handling in establishing an SVDRP connection (thanks to Davide Achilli) for pointing this out). - The new configuration file 'svdrphosts.conf' is now used to define which hosts may access the SVDRP port (by default only 'localhost' has access). See FORMATS for details. - The special keywords TITLE and EPISODE can now be used in timer file names (see MANUAL and FORMATS for details). - The new setup parameter NameInstantRecord can be used to define how an instant recording will be named (see MANUAL for details). - When looking for the EPG record of the timer that starts a recording, now that record is taken which covers the time calculated as 'start + (Setup.MarginStart * 2) + 1)' in order to have a better chance of hitting the right record in case of an instant recording. Timers that start further in the future should always be programmed via the "Schedules" menu. - The special VPIDs '0' and '1' are now used to enable recording radio channels. Actually '0' should be enough, but '1' must be used with encrypted channels (driver bug?). Note, though, that since VDR is mainly a *video recorder*, some features like, e. g., the progress display, may not work as expected with radio recordings. Thanks to Michael Paar. - Fixed a problem with the ERR macro defined by ncurses.h (thanks to Artur Skawina).	2002-02-03 18:00:00 +01:00
Klaus Schmidinger	27919ee969	Version 0.99pre2 ... - Fixed setting the OSD size in the 'Confirm' interface call (thanks to Deti Fliegl). - Removed the 'read incomplete section...' error message in the EIT processor. - Fixed channel data for "DW TV" (thanks to Axel Gruber). - Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan Schreiber). - Prepared the OSD functions for multiple overlapping windows. - Removed the check to see whether the system time is running linearly. - Improved performance of SVDRP command entry. - Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to broadcast the correct timestamps for EPG events between 0:00 and 6:00! - Fixed failing watchdog timer if program hangs in OSD activities (thanks to Carsten Koch). - No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and REMOTE=KBD (thanks to Lauri Pesonen). - The "Recordings" menu now displays a hierarchical structure if there are subdirectories for the recordings. This can be controlled through the "RecordingDirs" parameter in the "Setup" menu. See "MANUAL/Replaying a Recording" for details. - Improved speed of setting the Help button texts. - Fixed handling file names that contain single quotes (') or dollar signs ($) in the call to the shutdown command (option '-s') and the recording command (option '-r'). - Improved error handling in the editing process; the resulting file will be deleted if an error occured. - A message is now prompted at the end of the editing process, indicating whether the process succeeded or failed. - Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to Sergei Haller). - A message is now prompted if free disk space becomes low during recording. - The editing process now calls AssertFreeDiskSpace() to remove deleted recordings if the disk becomes full. - The "Main" menu now displays in its title the used disk space (in percent) and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB per minute. - Activating the "Recordings" menu now displays "scanning recordings..." to give the user some feedback in case this takes longer. - Status messages are now displayed centered. - Removed the 'Tools' subdirectory from the VDR archive. All contributed tools can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.	2002-01-27 18:00:00 +01:00
Klaus Schmidinger	8465398c6d	Version 0.97 ... - Implemented a lock file to prevent more than one instance of VDR from removing files from the video directory at the same time. - The new setup parameter SplitEditedFiles can be used to control whether or not the result of an editing process shall be written into separate files. - Fixed handling repeat function when using LIRC (thanks to Matthias Weingart). - The shutdown program (defined with the '-s' option) now also gets the channel number and recording title of the timer (see INSTALL). - New channel data for 'Premiere One', 'Premiere X-Action', 'Fox Kids T�rkce' and 'N24' (thanks to Andreas Share, Ulrich R�der, Uwe Scheffler and Simon Bauschulte). Note that if you are using the default 'channels.conf' or 'channels.conf.cable' files you may need to check any exiting timers to see whether they still use the correct channel number. - Fixed the "EPG bugfix" (sometimes had duplicate information in Subtitle and Extended Description). - Fixed checking for valid video device when setting the video mode. - The external command 'sort' is no longer required. VDR now sorts the list of recordings itself, making sure that recordings that stem from repeating timers are sorted chronologically. Sorting is done according to the setting of the current locale, so you may want to make sure LC_COLLATE is set to the desired value (see INSTALL). - Fixed handling 'newline' characters in EPG texts (thanks to Rolf Hakenes for an improved version of his 'libdtv'). Newline characters are always mapped to a single "blank" in VDR, because they would otherwise disturb the Title and Subtitle layout in the channel display (where these are assumed to be single line texts) and would have to be specially handled in the 'epg.data' file and the LSTE command in SVDRP. - Mapping ` ("backtick") characters in EPG texts to ' (single quote). - Fixed timers starting and ending at unexpected times. 'localtime()' was not thread safe, now using localtime_r(). - Removed the "system time seen..." message. - Fixed a bug in the replay mode display when pressing the Green or Yellow button while in trick mode (thanks to Stefan Huelswitt) - Closing all open file descriptors when calling external programs. - The menu timeout now also works when pressing the "Back" button during replay to enter the "Recordings" menu. - Updated 'channels.conf' for the "Bundesliga" channels of Premiere World (thanks to Helmut Sch�chner). - Fixed reading timers.conf and channels.conf that contain blanks after numeric values. - Fixed handling trick modes near the beginning and end of a recording. - Pressing the "Back" button while replaying a DVD now leads to the DVD menu.	2001-10-21 18:00:00 +02:00
Klaus Schmidinger	66bab90b60	Version 0.96 ... - Made VDR compile with libdvdread-0.9.1 (thanks to Andreas Schultz). Note that you now _need_ version 0.9.1 of libdvdread to compile VDR with DVD support! - Several fixes to the replay mode display (thanks to Stefan Huelswitt): no more replay mode display when pressing the "Green" or "Yellow" button (Skip +/-60s); fixed timeout when pressing '0' to set an editing mark while the progress display is not shown; mode display is shown after progress display is closed; pressing "Ok" while the mode display is on brings up the progress display; no more unnecessary display of "normal play mode". - Supplying the new frontend parameter 'Inversion' (currently it is always set to INVERSION_AUTO, which should work with all channels on Astra). - Removing unnecessary double quotes from EPG Subtitle in EPGBugfixLevel >=1. - EPG info is now updated if the contents changes but the ID remains the same. - Fixed handling SVDRP commands whith more than one blank between the command word and the options. - The current volume setting is now saved to setup.conf and restored at the next program start. - New command line option '-r' to define a command that gets called before and after each recording (see INSTALL for details). - Implemented a check to see whether the system time is running linearly. - Writing the current time (as seen by VDR) into the log file when starting a timer recording (this may help debugging cases where timers don't start at the expected time). - Made the volume, mute and power keys work when a menu is active, too (thanks to Matthias Weingart).	2001-09-23 18:00:00 +02:00
Klaus Schmidinger	bb18b9e0b4	Version 0.94 ... - Implemented automatic shutdown (see INSTALL and MANUAL for details). - New SVDRP command NEXT to show the next timer event. - The new remote control key "Power" can be used to turn the VDR machine off (this requires the presence of the '-s' option). - Fixed code for the default "Ok" button on the PC keyboard (was 0x162 on the "good old" keyboards (with the F-keys at the left side), while it changed to 0x15E on the newer keyboards). - When a recording is edited, the summary information (if present) is now also copied. - When a recording is running on the primary interface, any attempt to change the current channel will now lead to a "Channel locked" message. - The main program loop now first checks whether any timer recordings are finished, before starting a new timer recording. This is important in case one timer ends at the same time another timer starts. - New setup parameter OSDMessageTime to define how long an OSD message shall be displayed. - The "File" parameter of a timer can now contain the '~' character to store the recording in a hierarchical directory structure. The '~' character has been chosen since the file system's directory delimiter '/' may be part of a regular programme name (showing the directory hierarchy in the "Recordings" menu will follow later). - Repeating timers now create recordings that contain the 'Subtitle' information from the EPG data in their file name. Typically (on tv stations that care about their viewers) this contains the episode title of a series. The subtitle is appended to the timer's file name, separated by a '~' character, so that it results in all recordings of this timer being collected in a common subdirectory. You can disable this with the 'UseSubtitle' parameter in the "Setup" menu. - The summary information is now taken from the EPG data at the actual time of recording (no longer at the time the timer is created in the "Schedule" menu). If a timer already has summary data, that data will be used. If you have repeating timers in your 'timers.conf', you may want to make sure they do NOT contain any summary information (that's the last field in the timer definitions). Use your favourite text editor to delete that information. That way every recording will store the actual summary data at the time of the recording.	2001-09-02 18:00:00 +02:00
Klaus Schmidinger	8f9cc68f76	Version 0.85 ... - Added Norwegian language texts (thanks to J�rgen Tvedt). - Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on systems with the KURT/utime-patch (thanks to Guido Fiala). - Changed the check whether the driver is loaded in runvdr to check for the 'dvb' module (the last one loaded). - Fixed repeat function with LIRC (thanks to Stefan Huelswitt). - Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich R�der). - Made the position of the channel display configurable (thanks to Stefan Huelswitt). - Made the width and height of the OSD configurable (thanks to Stefan Huelswitt). - DiSEqC support can now be generally enabled/disabled in the Setup menu. This may be necessary if your multiswitch gets irritated by the default DiSEqC codes '0' (thanks to Markus Lang). - Fixed replaying in case there is no index file. - Fixed jumping to an editing mark when replay has been paused. - Avoiding unnecessary code execution in the replay progress display (thanks to Guido Fiala). - When entering time values the digits that still have to be entered are now shown as '-' (as in "1-:--"). - When setting an editing mark while the progress display is not active, the display will now be turned on for a short while to indicate the successful setting of the mark. - Updated 'channels.conf' for Premiere World (thanks to Helmut Sch�chner). Check your timers if you use this channels.conf file, since the sequence of several PW channels has been changed. - Changed the color of "Info" messages to "black on green" and that of the confirmation messages (like "Delete...") to "black on yellow". - Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying, but I can't seem to find what causes this... any ideas anybody?). - Avoiding audio/video distortions in 'Transfer Mode' by no longer actually tuning the primary interface (which can't receive this channel, anyway). Apparently the driver gets irritated when the channel is switched and a replay session is started immediately after that. - Increased timeout until reporting "video data stream broken" when recording. - Explicitly switching back to the previously active channel after ending a replay session (to have it shown correctly in case it was in 'Transfer Mode').	2001-07-29 18:00:00 +02:00